Best practice for throwing OAAttr Errors on calculated vo attributes

Hi All,
I was hoping to get some views on how to approach the following problem:
I have a field in my EO say lineTypeId, I populate this using an LOV which is based primarily on a calculated field which is a lookup against lineTypeId, lets call it lineTypeName, but also has an lov return only mapping to populate lineTypeId
When I do my validation in my EO I throw an OAAttr error against the lineTypeId if its not populated
Because the lineTypeId is not visible on the page (formValue bean) then I dont see the error flag next to the lineTypeName field
How would you solve this problem and get the error to flag next to the lineTypeName field?
Things to consider
1. I dont want to repeat my validation in the VO, this is just duplcating validation code and I would prefer that to stay in my EO
2. Is there any way to check if a particular attribute in the VO is in error, i.e. could we say in the VO if the lineTypeId is in error then get the error message for that attribute and throw it against the lineTypeName attribute at a VO level
Any views/opinions/experiences are welcomed
Thanks
Keith Turley
Edited by: The Turtle on Nov 20, 2009 1:41 AM

Similar Messages

What is the best practice for logging runtime error or uncheked exceptions

hello
my main problem is logging the nullPointerException to a file
suppose I have this method
public void myMethod()
   //..... some declaration here
   User user = obj.findUser("userx"); //this may return null
   System.out.println("user name is "+user.getName()); // I may have a null pointer exception here
}so what is the best practice to catch the exception ??
can I log the exception without catching it ???
thank you

A terrible way of logging exceptions.Not that im not agreeing with you, but why? (I havent
actually used this)Because it's always on, for one thing. It's not really configurable either, unless you go to some trouble to make it so. You'd have to provide an InputStream. How? Either at compile-time, which is undesirable, or by providing configuration, which a logging framework has already done, better. Then there's the fact that you can't log anything other than the stacktrace - not particularly helpful a lot of the time. In short, it's a buggy and incomplete solution to something that's already been solved much much better by, for example, Log4J

Best practice for data migration install v1.40 - Error 2732 Directory manag

Hi
I'm attempting to install SAP Best Practice for Data migration 1.40 on Win Server 2008 R2 (64 bit).
Prerequisite error
Installation program stops with missing file error
The following file was not found
... \migration\InstallationWizard\BusinessObjects Data Services\setup.exe
The file is necessary for successful installation. Please connect to internet or refer to Quick Guide (available on SAP note 1527151) for information regarding the above file.
Windows installer log displays
Error 2732 Directory Manager not initialized
SAP note 1527151 does not exist or is internal.
Any help appreciated on what is the root cause of the error as the file does not exist in that folder in the installation zip file.
Other prerequisite of .NET 3.5.1 met already.
Patch is released since 20.11.2011 so I presume that it is a good installation set.
Thanks,
Alan

Hi Alan,
There are details on data migration v1.4 installations on SAP website and market place. The below link should guide to the right place. It has a power point presentation and other useful links as well.
http://help.sap.com/saap/sap_bp/DMS_V140/DMS_US/html/index.htm
Arun

Best practice for Error logging and alert emails

I have SQL Server 2012 SSIS. I have Excel files that are imported with Exel Source and OLE DB Destination. Scheduled Jobs runs every night SSIS packages.
I'm looking for advice that what is best practice for production environment.Requirements are followings:
1) If error occurs with tasks, email is sent to admin
2) If error occurs with tasks, we have log in flat file or DB
Kenny_I

Are you asking about difference b/w using standard logging and event handlers? I prefer latter as using standard logging will not always data in the way in which we desire. So we've developed a framework to add necessary functionalities inside event handlers
and log required data in the required format to a set of tables that we maintain internally.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Best practice for licence server for RDS Farm & Certificate errors

Hello,
I am in the process of creating an RDS farm using Server 2008 R2. I have three Session Hosts and a Connection Broker.
I have a set of 10 user CALs available and also another 20 on our current RDS server which will need migrating once we go live with the farm.
I understand the User CALs need to be installed on another Server 2008 R2 and I am wondering what is best practice. We are running on an entirely virtual environment and it would be simple enough to create another server and install the CALs on there.
The only issue with that is that I would need to create a replica of this new machine for DR purposes, but this would take up valuable space which may not be necessary.
We are planning on creating replicas of one of the Session hosts and the broker for DR, so I am guessing I would need to install some CALs on the Session Host which is going to be replicated.
There are a few options and I am just wondering what is the best way to go about things.
Also, as an aside, I am getting an annoying certificate error each time I log a test user onto the RDS farm - I think this is because I am using the DNS alias of the RDS Farm to log on. Is there an easy way to get around this, other than the 'Do not show
this message again'. I have been doing some research and the world of Certificates is very confusing!!
Thanks,
Caroline
C.Rafferty

Hi Caroline,
Firstly for your License related issue, you can perform the step on any VM or can create the new VM as replica for RDSH server also. But please be sure that you have installed RD License server on it, activate it and then install RDS CAL on it. But be safe
if possible don’t install RD License server with RDCB, please make that out of it as little away. As you can also install RD License server with AD or make replica of that and install RDL on that.
Best practices for setting up Remote Desktop Licensing (Terminal Server Licensing) across Active Directory Domains/Forests or Workgroup
http://support.microsoft.com/kb/2473823
What’s the specified certificate error which you are receiving?
If you're going to allow users to connect externally and they will not be part of your domain, you would need to deploy certificates from a public CA. In meantime you can refer blog for getting insight for certificate case.
Certificate Requirements for Windows 2008 R2 and Windows 2012 Remote Desktop Services
http://blogs.technet.com/b/askperf/archive/2014/01/24/certificate-requirements-for-windows-2008-r2-and-windows-2012-remote-desktop-services.aspx
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Best practice for phone number column data type

Hi,
I hope I have posted this in the right forum, if not just notify me and i will remove it to the correct area.
What would be considered best practice for storing a phone number.
Number of Varchar2.
Ben

Well I was thinking that Number would have the following disadvantages,
1. Users entering phone numbers into a form may be tempted to pre format with spaces, thereby throwing up an error.
2. Mobile phone numbers may have leading zeros
3. Calculations are not carried out on phone numbers.
I was leaning towards a varchar2 type.
Ben

Best practices for dealing with Exceptions on storage members

We recently encountered an issue where one of our DistributedCaches was terminating itself and restarting due to an RuntimeException being thrown from our code (see below). As usual, the issue was in our own code and we have updated it to not throw a RuntimeException under any circumstances.
I would like to know if there are any best practices for Exception handling, other than catching Exceptions and logging them. Should we always trap Exceptions and ensure that they do not bubble back up to code that is running from the Coherence jar? Is there a way to configure Coherence so that our DistributedCaches do not terminate even when custom Filters and such throw RuntimeExceptions?
thanks, Aidan
Exception below:
2010-02-09 12:40:39.222/88477.977 Oracle Coherence GE 3.4.2/411 <Error> (thread=DistributedCache:StyleCache, member=48): An exception (java.lang.RuntimeException) occurred reading Message AggregateFilterRequest Type=31 for Service=DistributedCache{Name=StyleCache, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCount=1021, BackupCount=1, AssignedPartitions=201, BackupPartitions=204}
2010-02-09 12:40:39.222/88477.977 Oracle Coherence GE 3.4.2/411 <Error> (thread=DistributedCache:StyleCache, member=48): Terminating DistributedCache due to unhandled exception: java.lang.RuntimeException

Bob - Here is the full stacktrace:
2010-02-09 13:04:22.653/90182.274 Oracle Coherence GE 3.4.2/411 <Error> (thread=DistributedCache:StyleCache, member=47): An exception (java.lang.RuntimeException) occurred reading Message AggregateFilterRequest Type=31 for Service=DistributedCache{Name=StyleCache, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCount=1021, BackupCount=1, AssignedPartitions=205, BackupPartitions=204}
2010-02-09 13:04:22.653/90182.274 Oracle Coherence GE 3.4.2/411 <Error> (thread=DistributedCache:StyleCache, member=47): Terminating DistributedCache due to unhandled exception: java.lang.RuntimeException
2010-02-09 13:04:22.653/90182.274 Oracle Coherence GE 3.4.2/411 <Error> (thread=DistributedCache:StyleCache, member=47):
java.lang.RuntimeException: java.lang.ClassNotFoundException: com.edmunds.vehicle.Style$PublicationState
     at com.edmunds.common.coherence.EdmundsEqualsFilter.readExternal(EdmundsEqualsFilter.java:84)
     at com.tangosol.io.pof.PortableObjectSerializer.initialize(PortableObjectSerializer.java:153)
     at com.tangosol.io.pof.PortableObjectSerializer.deserialize(PortableObjectSerializer.java:128)
     at com.tangosol.io.pof.PofBufferReader.readAsObject(PofBufferReader.java:3284)
     at com.tangosol.io.pof.PofBufferReader.readAsObjectArray(PofBufferReader.java:3328)
     at com.tangosol.io.pof.PofBufferReader.readObjectArray(PofBufferReader.java:2168)
     at com.tangosol.util.filter.ArrayFilter.readExternal(ArrayFilter.java:243)
     at com.tangosol.io.pof.PortableObjectSerializer.initialize(PortableObjectSerializer.java:153)
     at com.tangosol.io.pof.PortableObjectSerializer.deserialize(PortableObjectSerializer.java:128)
     at com.tangosol.io.pof.PofBufferReader.readAsObject(PofBufferReader.java:3284)
     at com.tangosol.io.pof.PofBufferReader.readAsObjectArray(PofBufferReader.java:3328)
     at com.tangosol.io.pof.PofBufferReader.readObjectArray(PofBufferReader.java:2168)
     at com.tangosol.util.filter.ArrayFilter.readExternal(ArrayFilter.java:243)
     at com.tangosol.io.pof.PortableObjectSerializer.initialize(PortableObjectSerializer.java:153)
     at com.tangosol.io.pof.PortableObjectSerializer.deserialize(PortableObjectSerializer.java:128)
     at com.tangosol.io.pof.PofBufferReader.readAsObject(PofBufferReader.java:3284)
     at com.tangosol.io.pof.PofBufferReader.readObject(PofBufferReader.java:2599)
     at com.tangosol.io.pof.ConfigurablePofContext.deserialize(ConfigurablePofContext.java:348)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.readObject(Service.CDB:4)
     at com.tangosol.coherence.component.net.Message.readObject(Message.CDB:1)
     at com.tangosol.coherence.component.net.message.requestMessage.distributedCacheRequest.partialRequest.FilterRequest.read(FilterRequest.CDB:8)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$AggregateFilterRequest.read(DistributedCache.CDB:4)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:117)
     at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onNotify(DistributedCache.CDB:3)
     at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:37)
     at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.ClassNotFoundException: com.edmunds.vehicle.Style$PublicationState
     at java.lang.Class.forName0(Native Method)
     at java.lang.Class.forName(Class.java:169)
     at com.edmunds.common.coherence.EdmundsEqualsFilter.readExternal(EdmundsEqualsFilter.java:82)
     ... 25 more
2010-02-09 13:04:23.122/90182.743 Oracle Coherence GE 3.4.2/411 <Info> (thread=Main Thread, member=47): Restarting Service: StyleCacheOur code was doing something simple like
catch(Exception e){
    throw new RuntimeException(e);
}Would using the ensureRuntimeException call do anything for us here?
Edited by: aidanol on Feb 12, 2010 11:41 AM

Tips and best practices for translating C into LabVIEW? SERIOUS newbie...

I need to translate a C function into LabVIEW. This will be my *first* LabVIEW project. I've been reading some tutorials, and I'm still struggling to get my brain out of "C/C++ mode" and learn the LabVIEW paradigms.
Structurally, the function that I need to translate gets called from a while-loop and performs a bunch of mathematical calculations.
The basic layout is something like this (this obviously isn't the actual code, it just illustrates the general flow control and techniques that it uses).
struct Params
// About 20 int and float parameters
int CalculateMetrics(Params *pParams,
float input1, float input2 [etc])
int errorCode = 0;
float metric1;
float metric2;
float metric3;
// Do some math like:
metric1 = input1 * (pParams->someParam - 5);
metric2 = metric1 + (input2 / pParams->someOtherParam);
// Tons more simple math
// A couple for-loops
if (metric1 < metric2)
// manipulate metric1 somehow
else
// set some kind of error code
errorCode = ...;
if (!errorCode)
metric3 = metric1 + pow(metric2, 3);
// More math...
// etc...
// update some external global metrics variables
return errorCode;
I'm still too green to understand whether or not a function like this can translate cleanly from C to LabVIEW, or whether the LabVIEW version will have significant structural differences.
Are there any general tips or "best practices" for this kind of task?
Here are some more specific questions:
Most of the LabVIEW examples that I've seen (at least at the beginner level) seem to heavily rely on using the front panel controls to provide inputs to functions. How do I build a VI where the input arguments(input1, input2, etc) come as numbers, and aren't tied to dials or buttons on the front panel?
The structure of the C function seems to rely heavily on the use of stack variables like metric1 and metric2 in order to perform calculations. It seems like creating temporary "stack" variables in LabVIEW is possible, but frowned upon. Is it possible to keep this general structure in the LabVIEW VI without making the code a mess?
Thanks guys!

There's already a couple of good answers, but to add to #1:
You're clearly looking for a typical C-function. Any VI that doesn't require front panel opening (user interaction) can be such a function.
If the front panel is never opened the controls are merely used to send data to the VI, much like (identical to) the declaration of a C-function. The indicators can/will be return values.
Which controls and indicators are used to sending data in and out of a VI is almost too easy; Click the icon of the front panel (top right) and show connector, click which control/indicator goes where. Done. That's your functions declaration.
Basically one function is one VI, although you might want to split it even further, dont create 3k*3k pixel diagrams.
Depending on the amount of calculations done in your If-Thens they might be sub vi's of their own.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV

Best practice for multi-language content in common areas

I've got a site with some text in header/footer/nav that needs to be translated between an English and Spanish site, which use the same design. My intention was to set up all the text as content to facilitate. However, if I use a standard dialog with the component's path set to a child of the current page node, I would need to re-enter the text on every page. If I use a design dialog, or a standard dialog with the component's path set absolutely, the Engilsh and Spanish sites will share the same text. If I use a standard dialog with the component's path set relatively (eg path="../../jcr:content/myPath"), the pages using the component would all need to be at the same level of the hierarchy.
It appears that the Geometrixx demo doesn't address this situation, and leaves copy in English. Is there a best practice for this scenario?

I'm finding that something to the effect of <cq:include path="<%= strCommonContentPath + "codeEntry" %>" resourceType ...
works fine for most components, but not for parsys, or a component containing a parsys. When I attempt that, I get a JS error that says "design.path is null or not an object". Is there a way around this?

Basic Strategy / Best Practices for System Monitoring with Solution Manager

I am very new to SAP and the Basis group at my company. I will be working on a project to identify the best practices of System and Service level monitoring using Solution Manager. I have read a good amount about SAP Solution Manager and the concept of monitoring but need to begin mapping out a monitoring strategy.
We currently utilize the RZ20 transaction and basic CCMS monitors such as watching for update errors, availability, short dumps, etc.. What else should be monitored in order to proactively find possible issues. Are there any best practices you all have found when implimenting Monitoring for new solutions added to the SAP landscape.... what are common things we would want to monitor over say ERP, CRM, SRM, etc?
Thanks in advance for any comments or suggestions!

Hi Mike,
Did you try the following link ?
If not, it may be useful to some extent:
http://service.sap.com/bestpractices
---> Cross-Industry Packages ---> Best Practices for Solution Management
You have quite a few documents there - those on BPM may also cover Solution Monitoring aspects.
Best regards,
Srini
Edited by: Srinivasan Radhakrishnan on Jul 7, 2008 7:02 PM

Best Practices for Using Photoshop (and Computing in General)

I've been seeing some threads that lead me to realize that not everyone knows the best practices for doing Photoshop on a computer, and in doing conscientious computing in general. I thought it might be a good idea for those of us with some exprience to contribute and discuss best practices for making the Photoshop and computing experience more reliable and enjoyable.
It'd be great if everyone would contribute their ideas, and especially their personal experience.
Here are some of my thoughts on data integrity (this shouldn't be the only subject of this thread):
Consider paying more for good hardware. Computers have almost become commodities, and price shopping abounds, but there are some areas where spending a few dollars more can be beneficial. For example, the difference in price between a top-of-the-line high performance enterprise class hard drive and the cheapest model around with, say, a 1 TB capacity is less than a hundred bucks! Disk drives do fail! They're not all created equal. What would it cost you in aggravation and time to lose your data? Imagine it happening at the worst possible time, because that's exactly when failures occur.
Use an Uninterruptable Power Supply (UPS). Unexpected power outages are TERRIBLE for both computer software and hardware. Lost files and burned out hardware are a possibility. A UPS that will power the computer and monitor can be found at the local high tech store and doesn't cost much. The modern ones will even communicate with the computer via USB to perform an orderly shutdown if the power failure goes on too long for the batteries to keep going. Again, how much is it worth to you to have a computer outage and loss of data?
Work locally, copy files elsewhere. Photoshop likes to be run on files on the local hard drive(s). If you are working in an environment where you have networking, rather than opening a file right off the network, then saving it back there, consider copying the file to your local hard drive then working on it there. This way an unexpected network outage or error won't cause you to lose work.
Never save over your original files. You may have a library of original images you have captured with your camera or created. Sometimes these are in formats that can be re-saved. If you're going to work on one of those files (e.g., to prepare it for some use, such as printing), and it's a file type that can be overwritten (e.g., JPEG), as soon as you open the file save the document in another location, e.g., in Photoshop .psd format.
Save your master files in several places. While you are working in Photoshop, especially if you've done a lot of work on one document, remember to save your work regularly, and you may want to save it in several different places (or copy the file after you have saved it to a backup folder, or save it in a version management system). Things can go wrong and it's nice to be able to go back to a prior saved version without losing too much work.
Make Backups. Back up your computer files, including your Photoshop work, ideally to external media. Windows now ships with a quite good backup system, and external USB drives with surprisingly high capacity (e.g., Western Digital MyBook) are very inexpensive. The external drives aren't that fast, but a backup you've set up to run late at night can finish by morning, and if/when you have a failure or loss of data. And if you're really concerned with backup integrity, you can unplug an external drive and take it to another location.
This stuff is kind of "motherhood and apple pie" but it's worth getting the word out I think.
Your ideas?
-Noel

APC Back-UPS XS 1300. $169.99 at Best Buy.
Our power outages here are usually only a few seconds; this should give my server about 20 or 25 minutes run-time.
I'm setting up the PowerChute software now to shut down the computer when 5 minutes of power is left. The load with the monitor sleeping is 171 watts.
This has surge protection and other nice features as well.
-Noel

Best Practice for External Libraries Shared Libraries and Web Dynrpo

Two blogs have been written on sharing libraries with Web Dynpro DC, but I would
like to know the best practice for doing this.
External libraries seem to work great at compile time, but when deploying there is often an error related to the external library not being a deployed component.
Is there a workaround for this besides creating a shared J2EE library which I have been able to get working? I am not interested in something that works, but really
what are the best practice for this. What is the best way to limit the number of jars that need to be kept in a shared library/ext library. When is sharing ref service/etc a valid approach vs. hunting down the jars in the portal libraries etc and storing in an external library.

Security is mainly about mitigation rather than 100% secure, "We have unknown unknowns". The component needs to talk to SQL Server. You could continue to use http to talk to SQL Server, perhaps even get SOAP Transactions working but personally
I'd have more worries about using such a 'less trodden' path since that is exactly the areas where more security problems are discovered. I don't know about your specific design issues so there might be even more ways to mitigate the risk but in general you're
using a DMZ as a decent way to mitigate risk. I would recommend asking your security team what they'd deem acceptable.
http://pauliom.wordpress.com

Best practice for upgrading task definition without deleting task instances

best practice for upgrading task definition in production system without deleting or terminating task instances
If I try and update a task definition with task instances running I get the following error:
Task definition 'My Task - Add User' may not be modified while there are active task instances
Is there a best practice to handle this. I tried to force an update through the console but that didn't work. I tried editing the task from the debug page and got the same error.

1) Rename the original task definition.
2) Upload the new task definition with the original name.
3) Later, after all the running tasks have timed out, delete the old definition.
E.g., if your task definition is "myWorkflow":
1) Rename "myWorkflow" to "myWorkflow-old-2009-07-28"
2) Upload the new task definition as "myWorkflow".
Existing tasks will stay linked to the original (renamed) workflow definition.
New tasks will use the new definition.
As the previous poster notes, depending on the changes you are making, letting the old task definitions stay active could have bad side-effects and might be better avoided.

What is best practice for conditional rendering?

i have a set of radio buttons that conditionally render another set, which in turn conditionally render a 3rd set.
i am doing this by using a valueChangeListener on an h:selectOneRadio
when i click yes on the 1st set it renders the 2nd set.
when i click yes on the 2nd set it renders the 3rd set.
when i click no on the 1st set now it correctly removes the 2nd & 3rd sets, the method also nulls the values.
when i click yes on the 1st set, it renders the 2nd set with the old values even though they were nulled. and i can see in the debugger they are still null.
so there seems to be an issue updating the model, but i dont know what that issue is. im sure it just has something to do with the way i am trying this conditional render. please see below for my first field and my valueChangeListener method.
any help with what is a best practice for this scenario would be greatly appreciated.
<h:panelGrid id="grid20a" columns="1">
                         <h:outputText value="Does this consult pertain to a specific "/>
                         <h:outputText value="planned or ongoing research project?: *"/>
                    </h:panelGrid>
                    <h:selectOneRadio id="specificResearch1" value="#{ethicsConsultBacking.bean.specificResearch}"
                         layout="lineDirection" required="true"
                         valueChangeListener="#{ethicsConsultBacking.processValueChangeSpecificResearch}">
                              <f:selectItems value="#{ethicsConsultBacking.yesNoMap}" />
                              <a4j:support event="onclick" reRender="form"/>
                    </h:selectOneRadio>
                    <h:message for="specificResearch1" styleClass="redText" />
public void processValueChangeSpecificResearch(ValueChangeEvent e) throws AbortProcessingException
          String newValue = e.getNewValue().toString();
          //reinitialize
          this.setRenderHumanSubjectResearch(false);
          this.setRenderIrbSection(false);
          this.setRenderIrbProtocolNumber(false);
          this.getBean().setHumanSubjectResearch(null);
          this.getBean().setPrimaryIrb(null);
          this.getBean().setIrbStatus(null);
          this.getBean().setIrbProtocolNumber(null);
          //check condition
          if (newValue.equalsIgnoreCase(this.YES))
               this.setRenderHumanSubjectResearch(true);
           * Clearing validation messages.
           * This will get around the issue with having a field
           * on the form that is both required & immediate.
          Iterator it = this.getFacesContext().getMessages();
          while (it.hasNext())
               it.next();
               it.remove();
          this.getFacesContext().renderResponse();
     }i also tried doing this another way by just using an action method attached to the a4j:support tag, but that introduced a different set of issue. so ill leave that out for now unless that is the direction someone would like to direct my issue in.
Thanks in advance

Similar issue is covered and explained here: [http://balusc.blogspot.com/2007/10/populate-child-menus.html]. Not sure if it solves your problem as you're using ajax4jsf whereas I don't, but it might give new insights. To the point you might need to bind the component(s) and use setValue(null) or setSubmittedValue(null).

Best practice for mouseless ADF applications

I am developing an ADF application where the users do not want to use the mouse.
So I would like to know if there are a best practice for this?
I am already using the accessKey functionality and subforms defaultCommand
But I have had problems setting focus to objects on a page like tables. I would like a button to return the focus to the table after it has made the command like delete.
I have implemented a solution where I have found inspiration several threads and other webpages (see below).
Is this solution okay?
Are there any problems with it?
I would also like to know if there are better pathways to go like
out of the box solutions,
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/79-global-template-button-strategy-360139.pdf (are there an example implementation?), or
http://one-size-doesnt-fit-all.blogspot.dk/2010/11/adf-ui-shell-supporting-global-hotkeys.html
in advance thanks
Inspiration webpages
https://blogs.oracle.com/jdevotnharvest/entry/how_to_programmatically_set_focus
http://technology.amis.nl/2008/01/04/adf-11g-rich-faces-focus-on-field-after-button-press-or-ppr-including-javascript-in-ppr-response-and-clientlisteners-client-side-programming-in-adf-faces-rich-client-components-part-2/
how to Commit table by writting Java code in Managed Bean?
Table does not refresh and getting error as UIComponent is Null
A short description of the solution:
(jdeveloper version 11.1.1.2.0)
--- Example where I use onSetFocus in jsff page
<af:commandButton text="#{hrsusuiBundle.FOCUS}" id="cb10"
partialSubmit="true" accessKey="f"
shortDesc="Alt+Shift+F"
actionListener="#{managedBean_clientUtils.onSetFocus}">
<af:clientAttribute name="focusField" value="t1"/>
</af:commandButton>
--- Examples where I use doTableActionAndSetFocus in jsff page
--- There have to be a binding in the jsff page to delete, commit and rollback
<af:commandButton text="#{hrsusuiBundle.DELETE}" id="cb4"
accessKey="x"
shortDesc="Alt+Shift+X"
partialSubmit="true"
actionListener="#{managedBean_clientUtils.doTableActionAndSetFocus}">
<af:clientAttribute name="focusField" value="t1"/>
<af:clientAttribute name="actionField" value="Delete"/>
</af:commandButton>
<af:commandButton text="#{hrsusuiBundle.COMMIT}" id="cb5"
accessKey="s" shortDesc="Alt+Shift+S"
partialSubmit="true"
actionListener="#{managedBean_clientUtils.doTableActionAndSetFocus}">
<af:clientAttribute name="focusField" value="t1"/>
<af:clientAttribute name="actionField" value="Commit"/>
</af:commandButton>
<af:commandButton text="#{hrsusuiBundle.ROLLBACK}" id="cb6"
accessKey="z" shortDesc="Alt+Shift+Z"
partialSubmit="true"
actionListener="#{managedBean_clientUtils.doTableActionAndSetFocus}"
immediate="true">
<af:resetActionListener/>
<af:clientAttribute name="focusField" value="t1"/>
<af:clientAttribute name="actionField" value="Rollback"/>
</af:commandButton>
--- This is the java class I use
--- It is published in adfc-config.xml as a request scope managedbean
public class ClientUtils {
public ClientUtils() {
public void doTableActionAndSetFocus(ActionEvent event) {
RichCommandButton rcb = (RichCommandButton)event.getSource();
String focusOn = (String)rcb.getAttributes().get("focusField");
String actionToDo = (String)rcb.getAttributes().get("actionField");
UIComponent component = null;
String clientId = null;
component = JSFUtils.findComponentInRoot(focusOn);
clientId = component.getClientId(JSFUtils.getFacesContext());
if ( "Delete".equals(actionToDo) || "Commit".equals(actionToDo) || "Rollback".equals(actionToDo) ){
BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
OperationBinding operationBinding = bindings.getOperationBinding(actionToDo);
Object result = operationBinding.execute();
AdfFacesContext.getCurrentInstance().addPartialTarget(component);
if (clientId != null) {
makeSetFocusJavaScript(clientId);
public static String onSetFocus(ActionEvent event) {
RichCommandButton rcb = (RichCommandButton)event.getSource();
String focusOn = (String)rcb.getAttributes().get("focusField");
String clientId = null;
if (focusOn.contains(":")) {
clientId = focusOn;
} else {
clientId = findComponentsClientIdInRoot(focusOn);
if (clientId != null) {
makeSetFocusJavaScript(clientId);
return null;
private static void writeJavaScriptToClient(String script) {
FacesContext fctx = FacesContext.getCurrentInstance();
ExtendedRenderKitService erks = null;
erks = Service.getRenderKitService(fctx, ExtendedRenderKitService.class);
erks.addScript(fctx, script);
public static void makeSetFocusJavaScript(String clientId) {
if (clientId != null) {
StringBuilder script = new StringBuilder();
//use client id to ensure component is found if located in
//naming container
script.append("var textInput = ");
script.append("AdfPage.PAGE.findComponentByAbsoluteId");
script.append ("('"+clientId+"');");
script.append("if(textInput != null){");
script.append("textInput.focus();");
script.append("}");
writeJavaScriptToClient(script.toString());
public static String findComponentsClientIdInRoot(String id) {
UIComponent component = null;
String clientId = null;
component = JSFUtils.findComponentInRoot(id);
clientId = component.getClientId(JSFUtils.getFacesContext());
return clientId;
}

Hi,
I am developing an ADF application where the users do not want to use the mouse. So I would like to know if there are a best practice for this?
Well HTML (and this is the user interface you see) follows a tab index navigation that you follow with "tab" and "shift+tab". Anything else is a short cut for which you use mnemonics (as you already do) or shortcuts (explained in http://one-size-doesnt-fit-all.blogspot.dk/2010/11/adf-ui-shell-supporting-global-hotkeys.html). There is a distinction to make between non-web environments (which I think you and your users have abackground in) and client desktop environments. Browsers block some keyboard functionality for their own purpose. So you may have to find a list of keys first that work across browsers. Unlike desktop clients, which allow you to "press a button" without the button to take focus, this cannot be done on the web. So you need to be clever here, avoiding buttons at all.
The following paper is about JavaScript in ADF and explains the basics for what Chris Muir explains in : http://one-size-doesnt-fit-all.blogspot.dk/2010/11/adf-ui-shell-supporting-global-hotkeys.html
http://www.oracle.com/technetwork/developer-tools/jdev/1-2011-javascript-302460.pdf
It has the outline for how to register short cut keys that perform a specific action (e.g. register ctrl+d to delete the current row you are on, or press F11 to execute a query (similar to Oracle Forms frmres files)). However, be aware that this includes some code you have to write (actually quite some code to be honest).
http://www.oracle.com/technetwork/developer-tools/adf/learnmore/79-global-template-button-strategy-360139.pdf (are there an example implementation?), or
http://one-size-doesnt-fit-all.blogspot.dk/2010/11/adf-ui-shell-supporting-global-hotkeys.html
Actually these are implementations as they come with example code for you to use and customize, do they? So what is this question asking for more ? Also note that global buttons don't quite have anything in common with the question you asked. I assume you want to see it as an implementation of the Forms toolbar that operates on the form or table the focus is in. This however does not work for the web as there is nothing that keeps track of which component has a focus and to what iterator (data block) it belongs. This would involve even more coding (though possibly doable)
Frank

Best practice for throwing OAAttr Errors on calculated vo attributes

Similar Messages

Maybe you are looking for