Best Practices to configure the connectivity with Bank and EBS

Hi All,
We are working on a requirement where Middleware(SOA) has to read the file from Oracle E-biz server and send it to BANK.
For Connectivity setup between Oracle E-biz and Middleware(SOA), Middleware(SOA) and BANK do we need to use oracle as user or we can use any user to communicate between E-biz and Bank?
Could you please share best practices/documents if you have any on how we should establish the connectivity and setup the workflow with Bank and E-Biz. E-Business
Thanks & Regards
Narendra

Hi Narendra,
Oracle User and the FTP user are 2 different users.
I'm assuming you'll be reading the file from R12 through File Adapter and writing it to Bank using FTP Adapter.
Oracle User is able to login into R12, do some operations, submit some concurrent programs/requests based on responsibilities and generate the file to be transferred (like in my case it did by running a Concurrent Request). The file so generated should be placed at a location from where File Adapter can read it within the BPEL process. Now to read the file, the user that is used is a SOA server user (again different from R12 user). This is the same user that you use to login into your SOA server physical box. Hence to be able to read the file, your file should have appropriate privileges (we set that as 777) so that it can be read by the SOA process (using SOA user).
FTP user, on the other hand, is the user that allows connection to Bank FTP server. This has absolutely no connection with R12. Bank who hosts the FTP server must give you the FTP user details that you'll use inside your FTP JNDI Configuration on Weblogic. When you deploy and run your process (you don't deploy adapter), it picks up the connection details from FTP JNDI properties that you defined in weblogic.
Hence both the jusers can be different and I don't think any best practices are required or do exist for this.
Regards,
Neeraj Sehgal

Similar Messages

Advice re best practice for managing the scan listener logs and list logs

Hi friends,
I've just started a job as a RAC dba administrator for some big 24*7 systems, I've never worked with clusterware and RAC.
2 Space problems
1) Very large listener_scan2.log in /u01/11.2.0/grid/log/diag/tnslsnr/<server name>/listener_scan2/trace folder
2) Heaps of log_nnn.xml files in /u01/11.2.0/grid/log/diag/tnslsnr/<server name>/listener_scan2/alert folder (4Gb used up)
Welcome advice on the best way to manage these in the short term (i.e. delete manually) and the recommended practice and safest way (adri maybe not sure how it works with scan listeners)
Welcome advice and commands that could be used to safely clean these up and put a robust mechanism in place for logfile management in RAC and CLusterware systems.
Finally should I be checking the log files in /u01/11.2.0/grid/log/diag/tnslsnr/<server name>/listener_scan2/alert regulalrly ?
My experience with listener logs is that they are only looked at when there are major connectivity issues and on the whole are ignored.
Thanks for your help,
Cheers, Rob

Have you had any issues that require them for investigative purposes? If not, just remove them. Are the logs required for some sort of audit process? If yes, gzip them to a location where you can use your OS tape backup policies to retain them for n-days. Once you remove an active file, it should recreate the file and continue without interruption.

BEST PRACTICES: How to deploy apps with public and private content & data?

Can anyone recommend a guide, blog post, etc. on best practices for:
- designing & deploying apps that have publicly-accessible (http + https) content, and
- content and data for which users must be authenticated and authorized?
NOTE: In our environment users are authenticated via OID. We're using Apex 4.

Hi,
Have a look at this Sample App for getting Auth Token from Instagram in windows phone app.
Also read the api documentation for more details from
here.
Pradeep AJ

Configuration the connection between portal and srm server only via JDBC

Dear all:
   We want to implement the SRM server and present the supplier web/page in the portal server. Our SRM and portal server install in intranet network.
   For internal employee use the SRM server and the Supplier access the portal server via Internet, we install Web Dispather in DMZ to exchange the HTTP request.
     Network TOP like this :
    SRM server--Portal||FireWall||-Web Dispatcher--Supplier
(--Internal|firewall--|DMZ|-Internet )
The question is : Between DMZ zone and our internal network zone ,there is the firewall and it only allows JDBC protocol (SQL statements or result set) to pass. Other protocol and port could not pass this firewall.
So ,it seems that no way to implement this ,right? Or any other way to implement it ?

thanks

Please help me configure authentic connection with Caller ID via ISDN 30B+D using Cisco ACS

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;}
Hi all
I have set up a dial up connection between to PC's at remote site and center. It using ISDN 30B+D which is configured on Router 3845. Currently I have configured authentic connection with username and password using Cisco ACS. To enhance the security configuration I want to authenticate both the phone number which dialup with Cisco ACS. And currently I have not done this. Please help me solve this problem.
Thanks so much
Longn

1) I deleted bridge-utils, netcfg
2) I edited /etc/hostapd/hostapd.conf:
interface=wlan0
#bridge=br0
edited /etc/dnsmasq.conf:
interface=wlan0
dhcp-range=192.168.0.2,192.168.0.255,255.255.255.0,24h
and edited /etc/rc.local:
ifconfig wlan0 192.168.0.1 netmask 255.255.255.0
ifconfig wlan0 up
3) I added in autostart these daemons: hostapd, dnsmasq and iptables.
Profit!

What is the best practice for using the Calendar control with the Dispatcher?

It seems as if the Dispatcher is restricting access to the Query Builder (/bin/querybuilder.json) as a best practice regarding security. However, the Calendar relies on this endpoint to build the events for the calendar. On Author / Publish this works fine but once we place the Dispatcher in front, the Calendar no longer works. We've noticed the same behavior on the Geometrixx site.
What is the best practice for using the Calendar control with Dispatcher?
Thanks in advance.
Scott

Not sure what exactly you are asking but Muse handles the different orientations nicely without having to do anything.
Example: http://www.cariboowoodshop.com/wood-shop.html

Best practice for integrating oracle atg with external web service

Hi All
What is the best practice for integrating oracle atg with external web service? Is it using integration repository or calling the web service directly from the java class using a WS client?
With Thanks & Regards
Abhishek

Using Integration Repository might cause performance overhead based on the operation you are doing, I have never used Integration Repository for 3rd Party integration therefore I am not able to make any comment on this.
Calling directly as a Java Client is an easy approach and you can use ATG component framework to support that by making the endpoint, security credentials etc as configurable properties.
Cheers
R
Edited by: Rajeev_R on Apr 29, 2013 3:49 AM

Best practice for configuring virtual drive on UCS

Hi,
I have two C210 M2 Server with LSI 6G MegaRAID 9261-8i Card with 10 hard drives of each 135GB. When I tried the automatic selection for the RAID configuration, the system has created one virtual drive with RAID 6. My concern is what the best practice to configure virtual drive? Is it RAID 1 and RAID5 or all in one drive with RAID6? Any help will be appreciated.
Thanks.

Since you are planning to have UC apps on the server, Voice applications have specified their recommendations here.
http://docwiki.cisco.com/wiki/Tested_Reference_Configurations_%28TRC%29
I believe your C210 server specs could be matching TRC #1, where you need to have
RAID 1 - First two HDDs for VMware
RAID 5 - Remaining 8 HDDs as datastore for virtual machines ( CUCM and CUC )
HTH
Padma

What's the best practice to manage the page file?

We have one Hyper-v Server running windows 2012 R2 with 128 GB RAM and 2 drives (C and D). It setup Automatically manage page file size for all drives. What's the best practice to manage the page file?
Bob Lin, MCSE & CNE Networking, Internet, Routing, VPN Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net How to Install and Configure Windows, VMware, Virtualization and Cisco on http://www.HowToNetworking.com

For Hyper-V systems, my general recommendation is to set the page file to 1-4 GB. This allows for a mini-dump should something happen. 99.99% of the time, Microsoft will be able to figure out the cause of the problem from the mini-dump. It does not make
sense on a Hyper-V system to set aside enough space to capture all the memory on the system because only a very small portion of that memory is used by the parent partition. Most of the memory is under control of the individual VMs.
Yes, I had one of the Hyper-V product group tell me that I should let Windows manage it. A couple of times I saw space on my system disk disappear because the algorithm decided it wanted all the space for the page file. Made it so I couldn't
patch my systems. Went back in and set the page file to 1-4 GB and have not had any issues since.
. : | : . : | : . tim

Best practices for using the knowledge directory

Anyone know when it is best to store docs in the Knowledge Directory versus Collab? They are both searchable, but I guess you can publish from the Publisher to the KD. Anyone have any best practices for using the KD or setting up taxonomies in the KD?

Hi Richard,
If you need to configure dynamic pricing that may vary by tenant and/or if you want to set up cost drivers that are service item attributes, you should configure Billing Tables in the Demand Management module in 10.0.
The cost detail functionality in 9.4 will likely be changed to merged with the new pricing feature in 10.0. The current plan is not to bring cost detail into the Service Catalog module.

Best practices for using the 'cost details' fields

Hi
Please could you advise us to the best practices for using the 'cost details' field within Pricing. Currently I cannot find the way to surface the individual Cost Details fields within the Next Generation UI, even with the tick box for 'display both cost and price' ticked. It seems that these get surfaced when the Next Generation UI is turned off, but cannot find them when it is turned on. We can see the 'Pricing Summary' field but this does not fulfill our needs, as some of our services have both recurring and one-off costs.
Attached are some screenshots to further explain the situation.
Many thanks,
Richard Thornton

Hi Richard,
If you need to configure dynamic pricing that may vary by tenant and/or if you want to set up cost drivers that are service item attributes, you should configure Billing Tables in the Demand Management module in 10.0.
The cost detail functionality in 9.4 will likely be changed to merged with the new pricing feature in 10.0. The current plan is not to bring cost detail into the Service Catalog module.

Listener refused the connection with the following error: ORA-12505

Hello,
Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor The Connection descriptor used by the client was: 127.0.0.1:1521:XE Windows XP + Oracle 10.1.0.20
I checked my *.ora files and found the host 127.0.0.1 but I noted by running netstat command on dos prompt that most of my ports are captured by www.360.cn including 1521
when am trying to shutdown then the following message appears:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not existsThanks & best regards

Hi,
[oracle@myoramachine ~]$ oerr ora 12505
12505, 00000, "TNS:listener does not currently know of SID given in connect descriptor"
// *Cause: The listener received a request to establish a connection to a
// database or other service. The connect descriptor received by the listener
// specified a SID for an instance (usually a database instance) that either
// has not yet dynamically registered with the listener or has not been
// statically configured for the listener. This may be a temporary condition
// such as after the listener has started, but before the database instance
// has registered with the listener.
// *Action:
// - Wait a moment and try to connect a second time.
// - Check which instances are currently known by the listener by executing:
//    lsnrctl services <listener name>
// - Check that the SID parameter in the connect descriptor specifies
//    an instance known by the listener.
// - Check for an event in the listener.log file.
[oracle@myoramachine ~]$1. Check lsnrctl services <listener name>
2. Check tnsping output:
tnsping MYORACLE
3. Check connectivity to the machine where your Oracle Server resides to port ( I assume 1521):
telnet <your_machine> 1521
4. In case you're not able to connect to the Oracle Server - I'd investigate it in a few directions:
     - network infrastructure problem
     - some disturbing process(es) / virus(es) on Oracle Server itself
     - firewall issue
Good luck!
http://dba-star.blogspot.com/

SLD configuration - JCO connection with SAP Router

Hi,
I installed the new Sneak Preview SP11 Java Edition including SAP Portal. I tried to run an own Web Dynpro Application with RFC-Access on a R/3 System.
Unfortunately I was not able to get the JCO Connection to run. The R/3 System is reached via SAP Router. I am a little bit confused, because with the last Sneak Preview (SP6 or SP7) this application was running without problems. Of course I thought that this can't be. So I uninstalled SP11 and installed the old version (SP7). I configured the JCO-connection, no problems.
Now I know that this is not my mistake (hopefully ).
If I configured a JCO-connection in SP11 and tried to PING, the first PING was ok. After testing the connection with user, the PING failed. The testing with user returns something like "user or password are not accepted".
Any ideas?
Best regards
Renald

In your SLD configuration, what do you have as your Logon Group under the message server config. Is it "PUBLIC". if so, then the user id needs to belong to that Logon Group in the system.
Regards,
Rich Heilman

Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE).

I have a 3 node cluster that has replica setup to replicate to another cluster off-site.
Suddenly one of the servers is not replicating with the error:
Hyper-V could not replicate changes for virtual machine 'machinename': The connection with the server was terminated abnormally (0x00002EFE). (Virtual Machine ID CC0FD4CC-F9B7-4C68-ABE8-B7D52A87899F)
All other servers are replicating fine so there cannot be a permissions or connectivity issue between the 2 clusters.
This server has 2TB of data so I'd rather not have to start the replication again.
Does anyone have any pointers?
Thanks.

Hi drensta,
Based on my knowledge , "hyper-v replica broker " is needed for failover cluster replica .
Here is a link for "Why is the "Hyper-V Replica Broker" required?"
http://blogs.technet.com/b/virtualization/archive/2012/03/27/why-is-the-quot-hyper-v-replica-broker-quot-required.aspx
Hope this hleps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Internet Download error message: the connection with the server has been reset

With an WRT54GS v6 firmware v 1.50.9 on Windows XP SP2 with Internet Explorer 7, Intel wireless internal adaptor w/ 802.11b, I was getting the error message "The connection with the server has been reset" when downloading most anything from the Internet. My IP address would then be reset and download would be interrupted. To resolve, I turned off the WZC (Wireless Zero Configuration) Services, and this seems to correct the problem.
Control Panel > Admin Tools > Services > Wireless Zero Configuration > Disable
Hopes this helps.

Hi!
Im using Windows 7.... I tried looking for the Wireless Config - but it isn't in the Services options!
So, what can I do now?
Thanx

Best Practices to configure the connectivity with Bank and EBS

Similar Messages

Maybe you are looking for