Best way of making filter in report!

I have a report! And I need make some filter tool!
What is the best way to do this? Is there any APEX tools to do this?
Regards,
Kostya

Similar Messages

Infoview - What's the best way to have Shortcuts to Reports?

Our Infoview users create shortcuts to reports that are in the Public Folders area
by selecting the check box next to the report and then selecting organise and add to my favourites.
This is placing what we thought was a shortcut to the file in My Folders > Favourites
The problem is that this is not creating a shortcut to the report but making a copy of it and placing in My Favourites area.
When the original report is altered then the copy obviously is not and is causing issues.
My question is what is the best way of just making a shortcut to the actual report and not a copy.
I understand there is also a categories area that may be able to add shortcuts but donu2019t have much info on this.
Is anyone able to let me know how this can be done and some steps in doing this?
Thanks for your help.

If it's CR, then change it under the CR Job server. If it's webi then under the Adaptive Job server if in XI 3.1 or in XIR2 under Webi job server/destinations/inbox.

What is the best way to display a Interactive Report having 20 columns

Hi,
I am having a Interactive Report having many columns (around 20).
What is the best way to display that report...by default we have to scroll it horizontally to see all the columns.
I want to avoid Horizontally Scrolling.
Thanks,
Deepak

Hello Deepak,
You mean apart from using a smaller font size or a bigger monitor?
You can think about combining / wrapping columns (so more data in one column).
Or hide some less important data and show that only on demand.
Greetings,
Roel
http://roelhartman.blogspot.com/
You can reward this reply by marking it as either Helpful or Correct ;-)

Best way to making DVD

So what is the best way making DVD after there took Encore a way ?

With Encore. They didn't take it away; they just made it end of life at CS6. This is the link for info re using Encore CS6 with CC, updated for CC 2014 and the cloud desktop install.
http://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html
It has links for getting the library (which is not installed with Encore) and a workflow with CC versions.
In the cloud desktop, assuming you have PR CC 2014 installed, you are looking for this:

What is the best way to create a SSRS Report with Header Data and its associated child data

So I have Member Information...Member ID...Member Addressing...etc.. I want to display this in the top part of the report like...
Member Name:
Member ID:
Member Address Line 1:
And then below I want to report on all the claims associated with a Member ID that is chosen by the Parameter. Obviously the Claim Data will be in Table format. Do I necessarily have to associate the Member Information with the Claim Information or simply
use the same parameter? And what is the best Toolbox item to use to display the Member Information on top?
Any help or guidance is greatly appreciated by this newbie.
Thanks for your review and am hopeful for a reply.
ITBobbyP

Hi ITBobby,
According to your description, you want to display all Claim Data for each Member. Right?
In Reporting Services, we can use a table to display those Claim Data and make them group on Member ID. If you want to display the Member Information, we can put the data fields on parent group level. Then we can use create a parameter to filter the Member
ID we need. We have tested this scenario in our local environment. Here are steps and screenshots for your reference:
1. Create a DataSet(DataSet1) which contains the data fields of Member and Claim.
2. Create a table and drag the Claim data into the table.
3. In Row Group. Right click on Details and add a parent group.
4. Select Member_ID in Group by.
5. Right click on the textbox of Claim data. Select Insert Row->Outside of Group-Above. Drag the MemberName into the inserted row.
6. In Report Data, right click on Parameter-> Add Parameter.
7. Type Member_ID in Name and Prompt, select allow multiple values.
8. In Available Values, select get data from a query. Choose DataSet1, select Member_ID in values and label. You can also set this in Default Values if you need.
9. Save and preview.
Reference:
Understanding Groups (Report Builder and SSRS)
Report Parameters (Report Builder and Report Designer)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Best ways to create rpd or reports if we have data in more fact tables

I have fact and dimensional data in one or more different tables. Then each logical table source represents one data segment.Please suggest me some methods or ways like fragmentation through which i can use them in creating rpd and report and main problem here is facts too large contains 25 million records.But adding tables in BMM layer effecting performance so can anyone other ways doing it in database side.
Thanks in advance
Edited by: user2989722 on Dec 3, 2009 3:09 PM

hi,
For the fragmentation you can create on dimension .The procedure is clearly explained in this blog
http://108obiee.blogspot.com/2009/01/fragmentation-in-obiee.html
http://www.rittmanmead.com/2007/06/19/obiee-data-modeling-tips-2-fragmentation/
For the performance point of view you can create a Materialized view (based on columns that your report is using) so that it will hit that particluar view instead of hitting whole table(25million records table) please look into this post
Re: Materialized views in OBIEE
thanks,
saichand.v

Best way to have Grouping in Report(rld) completely independent of rld file.

hi,
I have reports which are used by me multiple clients. Reports have parameters like Group1 which are multi-value. e.g : Group1 has firstname,lastname and fullname values. Table in report has group expression
=Fields(Parameters!Group1.Value).Value
Now client can group report by firstname,lastname or fullname. Different client wants different default value for Group1 parameter.
E.g : Client1 wants to view report grouped by firstname and client2 wants to view report grouped by Fullname. Now the problem is maintaining different rld's with different default parameters for each client. If report needs to be modified then all copy of
reports need to modified.
One possible solution is to move all grouping values into database table and fetch data(all possible group parameter values and default value for group parameter) through stored proc and bind to parameter. Data will be fetched for specific client filtered
by client name.
I want to know is there any other solution to this problem? What should be the best approach so that one copy of rld is enough?
Thanks in advance

Hi ANREV107,
Based on your description you have three kind of tables both have the field for the client name but the they have different names in DB: fistname,lastname and fullname. The report display the name column based on the paramters:group1, now the problem
is about the parameter group1 can’t provide dynamic default values according to different clients, right?
I have tested on my local environment and we can recreate the parameter group1 to by adding an dataset which will get the dynamic column name based on the client and then specify the parameter’s default value using “Get values from a query”, then we could
maintaining different rld's with different default parameters dynamically for each client with do modification for different client.
Details information for you reference:
1. Create an new dataset to get the Dynamic name fields, query like below(Two method to get the dynamic name fields, just need to replace the ‘Tablename’ to your table ):
Query 1(Three tables for three different client have the same table names):
SELECT name AS 'Group1'
FROM sys.columns AS c
WHERE (object_id = OBJECT_ID('TableName'))
and name in ('firstname','lastname','fullname')
Query2(Three tables for three different client have the three different table names):
select(
case when
'firstname' in (SELECT name AS 'ColumnName'
FROM sys.columns AS c
WHERE (object_id = OBJECT_ID('TableName1'))) THEN 'firstname'
when
'lastname' in (SELECT name AS 'ColumnName'
FROM sys.columns AS c
WHERE (object_id = OBJECT_ID('TableName2'))) THEN 'lastname'
when
'fullname' in (SELECT name AS 'ColumnName'
FROM sys.columns AS c
WHERE (object_id = OBJECT_ID('TableName3'))) THEN 'fullname'
END) as Group1
2. Modify the parameter “Group1” and change to “Get Values from a query“:
3. Now Using this expression to display the name will not need the change the default value anymore:
=Fields(Parameters!Group1.Value).Value.
If you still have any question, please feel free to ask.
Regards
Vicky Liu

What is best way to link two interactive reports?

Hi,
=================
Basic Set UP
=================
I've created two interactive reports-- Project report in Project page and Task report in Task page.
Project report in Project page can contain multiple projects.
Task report in Task page can contain multiple tasks.
One project can have multiple tasks.
But one task can have only one project.
=================
What I'm trying to achieve
=================
When I click a Project Name, it should pass Project ID to Task page and display tasks that are pertaining to the project.
When I create a new task, the passed Project ID should be mapped to the task.
=================
Challenges
=================
1. How can I pass Project ID from Project page to Task page while clicking Project Name in Project page ?
2. How can I get Project Name in Task page based on the Project ID passed from Project page ?
3. How can I display tasks pertaining to the Project Name ?
4. How can I take Project ID passed to Task page and map it to a new task?
Thanks,
Guy

1. How can I pass Project ID from Project page to Task page while clicking Project Name in Project page ?Create hidden item in Task Page, for example :P2_PROJECT_ID. Than link on required column to Task page:
Interactive Report -> Edit Column -> Link.
2. How can I get Project Name in Task page based on the Project ID passed from Project page ? There is two ways you can create a function that will return project name by id or you can post project name to task page (The second way is unsafe, you can miss some parts of your project name if you will have a ',' symbol)
3. How can I display tasks pertaining to the Project Name ?In interactive report source add condition to your query, for example:
and task_table.project_id=:P2_PROJECT_ID

Best way of making redundant AFP/SMB server

We have bought two XServe G5 systems in the hope of setting up a load balanced pair that would provide redundant access to AFP/SMB file shares (plus web and email). We have an XServe RAID box which we where going to attach to both servers.
What have people done to get the redundancy we want. These are the options I have looked at:
1) Put XSan on the RAID and connect both servers to it and then reshare the connection. Reading the XSan I see that XSan is not good for re-sharing via AFP/SMB. Also, it seems that I would have to setup everything on each machine seperately as the settings are stored locally.
2) Split the jobs between the two servers say email/web on one and AFP/SMB on the other. Then setup IP Failover for each server to the other, so that if one server fails the other takes over it's jobs. I presume I cannot simply use a single volume for this as mounting the same volume on each of the servers will cause problems. Is that correct?
3) Put all the services on one machine and setup IP failover to fall back to the second machine as required. This removes the issue of two machines accessing the RAID array at the same time.
Any advice would be greatly accepted.
Thanks
Ian
iMac CoreDuo Mac OS X (10.4.6)

This may help:
About IP Failover
First off, the IP Failover feature won't magically
configure the backup server to do what the primary
one was doing. In other words, with one server
configured for file services and the other for web
and email services, if the file server failed, the
other one wouldn't just start up file services by
itself!
IP Failover is best used where one server is
configured exactly as another. One server is used,
and the backup server is not used until the first one
fails. The backup server has a separate IP address
and network connection that it uses to periodically
poll the main server. If the main server leaves the
network, then the backup server enables a second
Ethernet interface which has been configured with the
main server's IP address. (You may be able to
multi-home one Ethernet connection, but I haven't
tried that. Plus, each of your Xserves has two
Ethernet ports, so that shouldn't be a problem.)
Yes, but you are not getting good value for money out of that solution.
Looking at the IP Failover it seems to work by having the secondary server monitor the primary. Once it fails it activates that address on the secondary and then enabling the required services on there. This doesn't seem to preclude each server being the master for the others secondary, as long as the services on each master are different.
Lets say mail runs on server 1 and AFP runs on server 2. Server 2 acts as the secondary for server 1 and has a script that activates mail on server 2 when it detects failure. Similarly if server 2 fails it will migrate the ip address server 1 and then startup the AFP service. Obviously each will have to be configured with matching services on each server.
Using the Xserve RAID
If you plan on storing all of your data on the Xserve
RAID, you need to know how "full" the RAID unit is
going to be and how many RAID volumes you wish to
create so that you can decide on how to connect it to
each server.
As we're migrating from an existing server to these we have a very good idea of what the sizes and volumes should be. We have a Xserve raid with four disks all on one side. Setup as a Raid 5 array that is suffient space for all our services. We can either partition that down into multiple volumes for each server/service.
What I don't have my mind around yet is how you control which server sees which volumes. We have to have each server be able to access each volume (so it can run that service in the event of failure) but I think it's going to be an issue to have two servers access the same volume at once. Is that correct? If two servers access the same volume at the same time it's going to cause trouble?
Think of the Xserve RAID as two
devices: each one has a fibre-channel port and holds
seven hard drives. Each "group of seven" can be
connected to any other device on the fibre-channel
network. Without a fibre-channel switch, you can
connect one or two other devices (one or two other
Xserves) to the Xserve RAID.
So you have these scenarios:
Using 1-7 drives and creating one large RAID volume:
you'll use one of two RAID controllers on your
Xserve RAID. You can connect the RAID to only one
Xserve or to a fibre-channel switch in order to
connect it to more devices.
Using 2-7 drives and creating two RAID volumes:
you'll use both RAID controllers (say, 3 on one side
and 3 on the other). Each RAID controller connects
to another fibre-channel device; thus, without a
switch, you can connect one to each server or both
to the same one.
Using 8 to 14 drives and creating one large RAID
volume: you'll be filling up one RAID controller and
all or part of the second, connecting both
fibre-channel connectors to the same Xserve, unless
you use a switch.
Using 8 to 14 drives and creating two RAID volumes:
You have the same options as with 2-7 drives.
See http://www.apple.com/xserve/raid/deployment.html
for some pictures, which may help.
We have the fibre switch so each server can access all drives. I just don't know to limit what sees what, or if I need to do that.
Xsan
If you're just connecting the Xserve RAID to one or
two servers and planning to reshare the volume(s)
created on the Xserve RAID, then Xsan is not
necessary, nor should it be used.
But is it possible for two servers to use the same disk, I know it is with XSan but what about without it.
I think what you want is the ability to use the
Xserve RAID as a locally-connected volume on each
server, where share points can be defined. The
server is connected to the Xserve RAID using a
fibre-channel cable, just as a FireWire, USB, or
eSATA hard drive would be connected to the server.
As far as the server is concerned, the Xserve RAID
controller or controllers represent external hard
disks. The difference is that the Xserve RAID also
has Ethernet connectivity so that you can manage it
without having to log into your server. Once
connected, addressing using fibre-channel is
automatic; the Xserve RAID gets a WWPN address and
the RAID volume appears on the desktop of the server
- no Xsan required at all. From there, it's
perfectly safe to create share points and share them
via AFP or SMB; clients would connect using AFP or
SMB protocols with IP addressing over an Ethernet
network to which both the Xserve and the client
computers are connected. Even though the Xserve
RAID may also have an Ethernet connection to that
network, no read and write commands are sent via
Ethernet to the RAID; the server sends those via its
fibre-channel connection to the Xserve RAID as it
would with any other drive when housing share
points.
As I say it's fine for one machine at a time, what about 2.
For load balancing concerns, see Apple's File
Services Guide for recommendations. On an Xserve G5
with 2GB or more of memory, you should easily
accommodate 50 simultaneously connected users
(mixture of AFP and SMB) without a performance hit.
Depending on what your users are doing (and the
speed of the Ethernet network to which your clients
and Xserve are connected), you may be able to handle
more or less users. More RAM in the Xserve and a
Gigabit Ethernet network for the server and clients
would allow you to simultaneously balance more
clients with less of a reduction in performance.
Xsan works differently, and its requirements are
somewhat different. With Xsan, your Xserve RAID is
connected to a fibre-channel network. (In the
previous direct-to-server example, the fibre-channel
network consisted of just the Xserve and the Xserve
RAID.) In this network, all clients, at least one
Xserve, and the Xserve RAID are all connected via a
fibre-channel network. The Xserve has Xsan software
installed on it and becomes a dedicated metadata
controller. Clients must have special Xsan client
software installed for the SAN volumes to appear. In
such cases, the protocol used to mount the SAN
volumes is the Xsan client protocol, not AFP or SMB.
Although you technically can reshare an Xsan volume
via AFP or SMB, performance would take a hit. Since
the Xsan volume is writeable by all other clients on
the fibre-channel network, adding an Xserve to
reshare the SAN volume via AFP or SMB would allow
clients to connect via Ethernet (Wi-Fi, etc.), but
the server wouldn't have exclusive access to the SAN
volume.
To be honest, two Xserves and an Xserve RAID simply
aren't enough to warrant a SAN in my book. Typically
SANs are used where there are a large number of "done
servers" doing computation tasks, and they all need
to be able to have access to the same "local volume."
They're also used in cases where clients need access
to large amounts of storage set up to work like a
"local disk" on a few video production computers.
Just for comparison, Gigabit Ethernet offers
throughput bursts of up to 125MB/s (megabytes per
second), and Fibre Channel offers burst of up to
200MB/s. (Apple's 400MB/s claim only somewhat makes
sense if you're using both Xserve RAID controllers
connected to the same server.) Even so, both media
sustain around 50MB/s to 75MB/s, which is quite good.
In fact, that matches local disk performance. The
local serial ATA hard disks that are used in Power
Mac G5 models are serial ATA 1.5Gb/s (gigaBITS per
second) or 187.5MB/s at maximum bursts;I typically
see performance in the 40MB/s to 50MB/s range.
Just for fun, here are throughput speeds of several
common connectors, in megabytes per second:
Serial ATA "3.0": bursts up to 375MB/s, sustains
about 75MB/s
LVD SCSI 320: bursts up to 320MB/s, sustains about
100MB/s
Fibre Channel: bursts up to 200MB/s, sustains about
60MB/s
Serial ATA "1.5": bursts up to 187.5 MB/s, sustains
about 50MB/s
SCSI-3 LVD SCSI 160: bursts up to 160MB/s, sustains
about 60MB/s
Ultra ATA/133 (PATA): bursts up to 133MB/s, sustains
about 50MB/s
Gigabit Ethernet: bursts up to 125MB/s, sustains
about 50MB/s
FireWire 800: bursts up to 100MB/s, sustains about
50MB/s
ATA/66 (PATA): bursts up to 66MB/s, sustains about
40MB/s
USB 2.0: bursts up to 60MB/s, sustains about 30MB/s
FireWire 400: bursts up to 50MB/s, sustains about
20MB/s
10/100 "Fast" Ethernet: bursts up to 12.5MB/s
Judging by your request, I think the "no Xsan"
scenario is the one you want.
--Gerrit
I would love to take XSan out of the picture and if that means that I can only use one of the servers at a time then fine I can live with that, but, I would rather have both active and working for me even if I have to split the services between the systems.

What is the best way to produce different report types out of the same SSRS Report

So I have a request to produce different report types based on a "Line Of Business" Parameter that is provided. I know that SSRS sometimes struggles with gathering the Metadata based on IF Statements.
What is the best way to provide multiple different report types with different data based on the "Line Of Business" Parameter that is provided? Can I simply do this via the SQL Stored Procedure? And how so that the Metadata is collected correctly?
Just don't know what the generally accepted business principle is on this and how to go about doing it.
Thanks in advance for your review and am hopeful for a reply.

Hi ITBobbyP,
Per my understanding that you have create an parameter (Line Of Businiess) to get diffetent types of report, I would like to confirm with you want do you mean about the different report types?
Is that mean you have table and one column named Report type, you want to filtered on this column? Or the report type you mean is like Parameterized reports,Linked reports,Snapshot reports,Subreports and so on.
If want you want is through the selection of the parameter to change the report type(Parameterized reports,Linked reports,Snapshot reports,Subreports ..),currently it is impossible to acheive this.
If you still have any problem, please try to provide more details information about your reqirements, the sampe data in the table, the report structure you have designed and so on.
Any problem, please feel free to ask.
Regards,
Vicky Liu
Vicky Liu
TechNet Community Support

What's the best way to check whether a user is logged in or not?

I have a question about basic session handling.
I'm running Tomcat 5.0.30 and have a web application where users can register with a username and password, and then log into a "member site".
What is the best way of making sure that a user actually has logged in or not?
What I've done in previous applications I've made is that I've just put a simple variable into the users session after he has successfully entered his password (i.e. Boolean loggedIn=true). Then I just test if this flag is true to grant him access to the member site. Is that a smart way of doing it?
Are there any libraries I can use which handles sessions for me in a secure way?
All comments and suggestions are appreciated!

Maintain a flag using session attributes it to one when the user is logs in set it to value.... and change set it zero or invalidate that session... when the user is logged out...
use something like this while user had logged in
session.setAttribute("flag",<unique_number>);
for checking whether the user had logged in or not...
if(Integer.parseInt(session.getAttribute("flag").toString())=!<unique_number>){
out.println("The session had expired");
out.close();
}

4 page form letter setup, best way

Is the best way to set up a report that has 4 different pages to insert 4 detail sections. Page 1 would be Section 3 (details a), page 2 would be detail b, etc. We have no need for headers or footers. Then to get page 1 to page break at the end of the page set New Page After to true. We have experimented with this but we are getting blank pages before and after a page but not consistently for every page if that makes sense. The 4 pages will reference the one row of data from the data set to print name and address on first page and various other details on pages two thru four. Then start over again with page one for the next row in the database.
Is this the wrong way to set up a four page report?
Bruce

Hi Bruce,
If you are facing the issue while designing the report, I would suggest you to post the query at CR design space : http://scn.sap.com/community/crystal-reports
If you are facing the issue from a .NET application please provide below info.
- Does the report work from CR designer?
- What version of Visual Studio you are using?
- What version of CRystal Reports are you using?
- Is it a win or web app?
- Bhushan
Senior Engineer
SAP Active Global Support
Follow us on Twitter
Got Enhancement ideas? Try the SAP Idea Place
Getting started and moving ahead with Crystal Reports .NET applications.

The best way

Hi what is the best way to call a 9ias report from a particular folder on the server, pass parameters, run the report without user intervention and store in a database blob. rwclient?rwserver?

There are a couple of advantages of burning to a disk image rather than directly to a DVD blank, although I don't think time/speed is as much an issue.
First advantage is that when it gets to the burning stage, unless your hard drive is about to die, you are not likely to get a "media error" or some sort and bomb out of iDVD. Sometimes bad DVD media can give you errors and the process gets aborted. That really stinks when your computer has just spent the last 3-hours doing all the encoding work and whatnot only to have it all lost due to crappy blanks.
Second, you can mount and play the disk image on your computer and preview the final result to make sure everything is OK before you commit to DVD blanks. This saves you wasting blanks in case you find issues. The preview mode of iDVD shows you what the final DVD is SUPPOSED to be like, but this does not always happen, so previewing the final disk image is previewing how it really turned out.
And finally, a disk image is a 4+GB file that is self contained and can easily be archived or saved for further copies and as a backup to your physical DVDs you made. So, for example, you could have a 160GB external hard drive dedicated to archiving all the DVDs you made and would hold these disc images. You could easily store over 30 final DVDs on this drive. Or you might have a server somewhere you can upload the images to.
Patrick

What is the best way to create a SSRS 2005 Line Chart Report for a 12 month period?

I'm looking for advice on how to create a SQL Server 2005 query and line chart report for SSRS 2005.
I need to display the peak number of patients assigned to a medical practice each month for a 12 month period based on the end-user selecting a
single month and year.
I've previously created a report that displays all patients assigned to the practice for any single month but I’m looking for advice on how to
how to produce a resultset that shows the peak number of patients each month for a 12 month period. I thought about creating a query that returns the peak count for each month (based on my previously created report which displays all patients assigned to the
practice for any single month) and then use a UNION statement to join all 12 months but I'm sure that isn't the most efficient way to do this. The other challenge with this approach (twelve resultsets combined via a UNION) is that the end-user needs to be
able to select any month and year for the parameter and the report needs to display the 12 month period based on the month selected (the month selected would be the last month of the 12 month period).
For the report I’ve previously created that displays all patients assigned to the practice for any single month, the WHERE statement filters the
resultset on two fields:
Start Date - The date the patient was assigned to the practice. This field is never null or blank.
End Date - The date the patient left the practice. This field can be null or blank as active patients assigned to the practice do not have an End Date. When the patient
leaves the practice, the date the patient left is populated in this field.
Using these two fields I can return all patients assigned to the practice during Nov 2012 by looking for patients that meet the following criteria:
start date prior to 11/30/2012 (using the last day of the month selected ensures patients added mid-month would be included)
AND
end date is null or blank (indicates the patient is active) OR the end date is between 11/1/2012 -11/30/2012 (returns patients that leave during the month
selected)
Regarding the query I need to create for the report that displays the peak count each month for 12 months, I'm looking for advice on
how to count patients for each month the patient is assigned to the practice if the patient has been assigned for several months (which applies to most patients). Examples are:
John Doe has a start date of 6/01/2012 and an End Date of 10/07/2012
Sally Doe has a start date of 8/4/2012 and no End Date (the patient is still active)
Jimmy Doe has a  start of 7/3/2012 and an End Date of 9/2/2012
Given these examples how would I include John Doe in the peak monthly count each month for May - October, Sally Doe in the peak monthly count for
August - December and Jimmy Doe in the peak monthly count for July – Sept if the end-user running the report selected December 2012 as the parameter?
Given the example above and the fact I'm creating a line chart I think the best way to create this report would be a resultset that looks like
this:
Patient Name
Months Assigned
John Doe
June 2012
John Doe
July012
John Doe
Aug 2012
John Doe
Sept 2012
John Doe
Oct 2012
Sally Doe
Aug 2012
Sally Doe
Sept 2012
Sally Doe
Oct 2012
Sally Doe
Nov 2012
Sally Doe
Dec 2012
Jimmy Doe
July 2012
Jimmy Doe
Aug 2012
Jimmy Doe
Sept 2012
From the resultset above I could create another resultset that would count\group on month and year to return the peak count for each month:
June 2012 - 1
July 2012 – 2
Aug 2012 - 3
Sept 2012 - 3
Oct 2012 - 2
Nov 2012 - 1
Dec 2012 - 1
The resultset that displays the peak count for each month would be used to create the line chart (month would be the X axis and the count would
be the y axis).
Does this sound like the best approach?
If so, any advice on how to create the resultset that lists each patient and each month they were assigned to the practice would be greatly appreciated.
I do not have permissions to create SPs or Functions within the database but I can create temp tables.
I know how to create the peak monthly count query (derived from the query that lists each patient and month assigned) as well as the line chart.
Any advice or help is greatly appreciated.

Thanks for the replies. I reviewed them shortly after they were submitted but I'm also working on other projects at the same time (hence the delayed reply).
Building a time table and doing a cross join to my original resultset gave me the desired resultset of the months assigned between dates. What I can't figure out now is how to filter months I don't want.
Doing a cross join between my original resultset that had two dates:
08/27/2010
10/24/2011
and a calendar table that has 24 rows (each month for a two year period)
my new resultset looks like this:
I need to filter the rows in yellow as the months assigned for stage 3 that started on 8/27/2010 should stop when the patient was assigned to stage 4 on 10/24/2011.
You'll notice that Jan - Sept 2011 isn't listed for Stage 4 assigned on 10/24/2011 as I included a filter in the WHERE clause that states
the Months Assigned value must be greater than or equal to the date assigned value.
Any advice would be appreciated.

Filter or Restrict on? Which is the best way to put it?

Hello Experts,
If there is a Characteristic/Key figure on a report in BEx, and I right click on it and find another data element say, 0FISPER it I EDIT. On right click on 0FISPER I a variable.
My question is this, do we way that the key figure is RESTRICTED ON 0FISPER
or, key figure is FILTERED by 0FISPER
When do we use Filter or Restrict on? Which is the best way to put it? How best is it read, please include the variable in your discussion.
I will appreciate this clarification.
e.g. Company code EDIT shows Company codes ZPPTcomp: with nodes 8000, 9000
Thanks.

Hi Amanda,
as per my understanding,
you are checking the structure field, you have selected edit then you are viewing a key figure and 0fiscper restricted by varaible. am I right?
if this is the case this is local selection and the key figure is restricted by fiscper variable means the restriction value user can enter in selection screen. if you select 0fiscper and select restrict there you can see single values, value range and you can also see varaible tab. by using varaible tab you can restrict to variable value.
hope this gives you some understanding.
Sathya

Best way of making filter in report!

Similar Messages

Maybe you are looking for