Best way to compare the effect of an adjustment
In iPhoto, if I change any settings, such as exposure, I can press the shift key to quickly toggle back and forth between the 'before' and 'after' version. I'm trying to figure out if there is a way to do the same thing in Aperture.
I know that I can press 'M' to flip back to the master image, but this has two problems: 1) If I've cropped the original image, then switching to the master doesn't keep me at the same place where I was zoomed into, and 2) I don't want to compare to the master, I just want to compare to the version just before I made the edit. So if I've made 4 adjustments, and then I make a 5th adjustment, I want to compare to the version with 4 adjustments, not the master (with no adjustments).
I also know that I can make a duplicate version of any photo and put them side by side. This is handy for some purposes, but this has problems too: 1) I don't want to have to create a new version every time I make any adjustment, just so that I can compare before and after, 2) it's several steps to arrange the two images side by side at the same zoom on the same section of the photo, which is very annoying to have to do for each adjustment, and 3) I'm working on a 15" MacBook Pro, so I really don't get to see much of my image when I have two versions side-by-side.
I've tried just using undo and redo, but that is so slow for large images that it's not useful for comparison purposes. I want to instantly flip back and forth between the two versions.
I would just suck it up and get over it IF iPhoto didn't have this exact feature - just press shift to compare to the previous version.
When I am adjusting an image using brushes I quit often compare the effect of the brush by toggling the "invert" action (from the cog wheel in the Brush HUD). This will switch between the image with the effect brushed in, and the image with the effect applied to the parts of the image that have not been brushed. It's not quite the same as in iPhoto, but it helps to judge the effect of a brushed in adjustment quickly
Regards
Léonie
Similar Messages
-
Best way to compare data of 2 tables present on 2 different servers
Hi,
We are doing data migration and I wil like to compare data between 2 tables which are present on 2 different server. I know to find the difference i can go for minus or full outer join and by creating the database link.
But my problem is the volume of the data. The tables under consideration has approximately 40-60 columns and number of rows in each tables are around 60-70 million. Also both the tables are on 2 diffferent servers.
I would like to know
1] What will be the best way to compare the data and print the difference from performance perepective? I know that if I am going for DB links then its will definitely impact the performance as the tables are across 2 different servers.
2] Is it advisable to go for using SQL - PL/SQL for this kind of senario or dump the data in flat files and use C or C++ code to find the difference.
Regards,
AmolCheck this at asktom.oracle.com. Search for "Marco Stefanetti" and follow the few posts between Marco and Tom. As far as your tables being on separate servers, you could consider dumping the data to file and using external table or using CTAS ( create table as select ) to get both tables locally.
http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:2151582681236 -
Hi,
Please suggest me the best way to fetch the record from the table designed below. It is Oracle 10gR2 on Linux
Whenever a client visit the office a record will be created for him. The company policy is to maintain 10 years of data on the transaction table but the table holds record count of 3 Million records per year.
The table has the following key Columns for the Select (sample Table)
Client_Visit
ID Number(12,0) --sequence generated number
EFF_DTE DATE --effective date of the customer (sometimes the client becomes invalid and he will be valid again)
Create_TS Timestamp(6)
Client_ID Number(9,0)
Cascade Flg vahrchar2(1)
On most of the reports the records are fetched by Max(eff_dte) and Max(create_ts) and cascade flag ='Y'.
I have following queries but the both of them are not cost effective and takes 8 minutes to display the records.
Code 1:
SELECT au_subtyp1.au_id_k,
au_subtyp1.pgm_struct_id_k
FROM au_subtyp au_subtyp1
WHERE au_subtyp1.create_ts =
(SELECT MAX (au_subtyp2.create_ts)
FROM au_subtyp au_subtyp2
WHERE au_subtyp2.au_id_k =
au_subtyp1.au_id_k
AND au_subtyp2.create_ts <
TO_DATE ('2013-01-01',
'YYYY-MM-DD'
AND au_subtyp2.eff_dte =
(SELECT MAX
(au_subtyp3.eff_dte
FROM au_subtyp au_subtyp3
WHERE au_subtyp3.au_id_k =
au_subtyp2.au_id_k
AND au_subtyp3.create_ts <
TO_DATE
('2013-01-01',
'YYYY-MM-DD'
AND au_subtyp3.eff_dte < =
TO_DATE
('2012-12-31',
'YYYY-MM-DD'
AND au_subtyp1.exists_flg = 'Y'
Explain Plan
Plan hash value: 2534321861
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 1 | 91 | | 33265 (2)| 00:06:40 |
|* 1 | FILTER | | | | | | |
| 2 | HASH GROUP BY | | 1 | 91 | | 33265 (2)| 00:06:40 |
|* 3 | HASH JOIN | | 1404K| 121M| 19M| 33178 (1)| 00:06:39 |
|* 4 | HASH JOIN | | 307K| 16M| 8712K| 23708 (1)| 00:04:45 |
| 5 | VIEW | VW_SQ_1 | 307K| 5104K| | 13493 (1)| 00:02:42 |
| 6 | HASH GROUP BY | | 307K| 13M| 191M| 13493 (1)| 00:02:42 |
|* 7 | INDEX FULL SCAN | AUSU_PK | 2809K| 125M| | 13493 (1)| 00:02:42 |
|* 8 | INDEX FAST FULL SCAN| AUSU_PK | 2809K| 104M| | 2977 (2)| 00:00:36 |
|* 9 | TABLE ACCESS FULL | AU_SUBTYP | 1404K| 46M| | 5336 (2)| 00:01:05 |
Predicate Information (identified by operation id):
1 - filter("AU_SUBTYP1"."CREATE_TS"=MAX("AU_SUBTYP2"."CREATE_TS"))
3 - access("AU_SUBTYP2"."AU_ID_K"="AU_SUBTYP1"."AU_ID_K")
4 - access("AU_SUBTYP2"."EFF_DTE"="VW_COL_1" AND "AU_ID_K"="AU_SUBTYP2"."AU_ID_K")
7 - access("AU_SUBTYP3"."EFF_DTE"<=TO_DATE(' 2012-12-31 00:00:00', 'syyyy-mm-dd
hh24:mi:ss') AND "AU_SUBTYP3"."CREATE_TS"<TIMESTAMP' 2013-01-01 00:00:00')
filter("AU_SUBTYP3"."CREATE_TS"<TIMESTAMP' 2013-01-01 00:00:00' AND
"AU_SUBTYP3"."EFF_DTE"<=TO_DATE(' 2012-12-31 00:00:00', 'syyyy-mm-dd hh24:mi:ss'))
8 - filter("AU_SUBTYP2"."CREATE_TS"<TIMESTAMP' 2013-01-01 00:00:00')
9 - filter("AU_SUBTYP1"."EXISTS_FLG"='Y')Code 2:
I already raised a thread a week back and Dom suggested the following query, it is cost effective but the performance is same and used the same amount of Temp tablespace
select au_id_k,pgm_struct_id_k from (
SELECT au_id_k
, pgm_struct_id_k
, ROW_NUMBER() OVER (PARTITION BY au_id_k ORDER BY eff_dte DESC, create_ts DESC) rn,
create_ts, eff_dte,exists_flg
FROM au_subtyp
WHERE create_ts < TO_DATE('2013-01-01','YYYY-MM-DD')
AND eff_dte <= TO_DATE('2012-12-31','YYYY-MM-DD')
) d where rn =1 and exists_flg = 'Y'
--Explain Plan
Plan hash value: 4039566059
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | 2809K| 168M| | 40034 (1)| 00:08:01 |
|* 1 | VIEW | | 2809K| 168M| | 40034 (1)| 00:08:01 |
|* 2 | WINDOW SORT PUSHED RANK| | 2809K| 133M| 365M| 40034 (1)| 00:08:01 |
|* 3 | TABLE ACCESS FULL | AU_SUBTYP | 2809K| 133M| | 5345 (2)| 00:01:05 |
Predicate Information (identified by operation id):
1 - filter("RN"=1 AND "EXISTS_FLG"='Y')
2 - filter(ROW_NUMBER() OVER ( PARTITION BY "AU_ID_K" ORDER BY
INTERNAL_FUNCTION("EFF_DTE") DESC ,INTERNAL_FUNCTION("CREATE_TS") DESC )<=1)
3 - filter("CREATE_TS"<TIMESTAMP' 2013-01-01 00:00:00' AND "EFF_DTE"<=TO_DATE('
2012-12-31 00:00:00', 'syyyy-mm-dd hh24:mi:ss'))Thanks,
VijayHi Justin,
Thanks for your reply. I am running this on our Test environment as I don't want to run this on Production environment now. The test environment holds 2809605 records (2 Million).
The query output count is 281699 (2 Hundred Thousand) records and the selectivity is 0.099. The Distinct values of create_ts, eff_dte, and exists_flg is 2808905 records. I am sure the index scan is not going to help out much as you said.
The core problem is both queries are using lot of Temp tablespace. When we use this query to join the tables, the other table has the same design as below so the temp tablespace grows bigger.
Both the production and test environment are 3 Node RAC.
First Query...
CPU used by this session 4740
CPU used when call started 4740
Cached Commit SCN referenced 21393
DB time 4745
OS Involuntary context switches 467
OS Page reclaims 64253
OS System time used 26
OS User time used 4562
OS Voluntary context switches 16
SQL*Net roundtrips to/from client 9
bytes received via SQL*Net from client 2487
bytes sent via SQL*Net to client 15830
calls to get snapshot scn: kcmgss 37
consistent gets 52162
consistent gets - examination 2
consistent gets from cache 52162
enqueue releases 19
enqueue requests 19
enqueue waits 1
execute count 2
ges messages sent 1
global enqueue gets sync 19
global enqueue releases 19
index fast full scans (full) 1
index scans kdiixs1 1
no work - consistent read gets 52125
opened cursors cumulative 2
parse count (hard) 1
parse count (total) 2
parse time cpu 1
parse time elapsed 1
physical write IO requests 69
physical write bytes 17522688
physical write total IO requests 69
physical write total bytes 17522688
physical write total multi block requests 69
physical writes 2139
physical writes direct 2139
physical writes direct temporary tablespace 2139
physical writes non checkpoint 2139
recursive calls 19
recursive cpu usage 1
session cursor cache hits 1
session logical reads 52162
sorts (memory) 2
sorts (rows) 760
table scan blocks gotten 23856
table scan rows gotten 2809607
table scans (short tables) 1
user I/O wait time 1
user calls 11
workarea executions - onepass 1
workarea executions - optimal 9
Second Query
CPU used by this session 1197
CPU used when call started 1197
Cached Commit SCN referenced 21393
DB time 1201
OS Involuntary context switches 8684
OS Page reclaims 21769
OS System time used 14
OS User time used 1183
OS Voluntary context switches 50
SQL*Net roundtrips to/from client 9
bytes received via SQL*Net from client 767
bytes sent via SQL*Net to client 15745
calls to get snapshot scn: kcmgss 17
consistent gets 23871
consistent gets from cache 23871
db block gets 16
db block gets from cache 16
enqueue releases 25
enqueue requests 25
enqueue waits 1
execute count 2
free buffer requested 1
ges messages sent 1
global enqueue get time 1
global enqueue gets sync 25
global enqueue releases 25
no work - consistent read gets 23856
opened cursors cumulative 2
parse count (hard) 1
parse count (total) 2
parse time elapsed 1
physical read IO requests 27
physical read bytes 6635520
physical read total IO requests 27
physical read total bytes 6635520
physical read total multi block requests 27
physical reads 810
physical reads direct 810
physical reads direct temporary tablespace 810
physical write IO requests 117
physical write bytes 24584192
physical write total IO requests 117
physical write total bytes 24584192
physical write total multi block requests 117
physical writes 3001
physical writes direct 3001
physical writes direct temporary tablespace 3001
physical writes non checkpoint 3001
recursive calls 25
session cursor cache hits 1
session logical reads 23887
sorts (disk) 1
sorts (memory) 2
sorts (rows) 2810365
table scan blocks gotten 23856
table scan rows gotten 2809607
table scans (short tables) 1
user I/O wait time 2
user calls 11
workarea executions - onepass 1
workarea executions - optimal 5Thanks,
Vijay
Edited by: Vijayaraghavan Krishnan on Nov 28, 2012 11:17 AM
Edited by: Vijayaraghavan Krishnan on Nov 28, 2012 11:19 AM -
I have a made some changes to an existing view. The change is adding a join and a new column from new table. I have created a version2 with all these changes. I want to make sure that same data exists in both the views. what is the best way to test the data.
Bad wording, the query results could be:
No rows selected. Same number of rows on both views and same data (considering view1 structure and view without the new column)
At least one row selected. If the count(*) on both was different, rows returned will be at least the difference. If the count was the same, then every returned row means that there's no equivalent row on view2 and a data difference may exist in at least one of the fields, so You have to find the equivalent row on view2 to compare.
On the query sintaxis, as view2 hava a new column and I guess it's not a constant value, You have to specify every column for the view1, and the same columns for view2, so new field isn't included and compared. -
Is there a way to compare the contents of a library by comparing itl files or some other files?
I need to compare the contents of my current library to one that existed 2 months ago but ALL I have is the itl file from 2 months ago. Can this be done?You are correct, many people have noticed over the years that Sound Check does not work as advertised.
A more effective approach is to treat the files with a 3rd party volume normalization program. Although I have not personally used it, many users on this Forum have reported good results from an inexpensive program called iVolume. -
I have lightroom 5.7. Now I have apple TV to connect my Mac to the TV scree. I wish to do a slide show on the TV. However, on the Mac, using ITunes to share photos with the TV, I cannot locate all photo files. What is the best way to save the slide show and put it where the Mac sharing can find it? So far, I made on one folder in Lightroom, put some photos there and I found them easily. Can this be done with a slide show? Please help quickly! Also worried that the photos I put on the new folder are hard to find afterwards, when the show is done. Where do they go when I delete from from the new folder?I am not alone
Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.
-
I am moving from PC to Mac. My PC has two internal drives and I have a 3Tb external. What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data
Paragon even has non-destriuctive conversion utility if you do want to change drive.
Hard to imagine using 3TB that isn't NTFS. Mac uses GPT for default partition type as well as HFS+
www.paragon-software.com
Some general Apple Help www.apple.com/support/
Also,
Mac OS X Help
http://www.apple.com/support/macbasics/
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Get Help with your Product
http://docs.info.apple.com/article.html?artnum=304725
Apple Mac App Store
https://discussions.apple.com/community/mac_app_store/using_mac_apple_store
How to Buy Mac OS X Mountain Lion/Lion
http://www.apple.com/osx/how-to-upgrade/
TimeMachine 101
https://support.apple.com/kb/HT1427
http://www.apple.com/support/timemachine
Mac OS X Community
https://discussions.apple.com/community/mac_os -
What is the best way to mimic the data from production to other server?
Hi,
here we user streams and advanced replication to send the data for 90% of tables from production to another production database server. if one goes down can use another one. is there any other best option rather using the streams and replication? we are having lot of problems with streams these days they keep break and get calls.
I heard about data guard but dont know what is use of it? please advice the best way to replicate the data.
Thanks a lot.....RAC, Data Guard. The first one is active-active, that is, you have two or more nodes accessing the same database on shared storage and you get both HA and load balancing. The second is active-passive (unless you're on 11.2 with Active Standby or Snapshot Standby), that is one database is primary and the other is standby, which you normally cannot query or modify, but to which you can quickly switch in case primary fails. There's also Logical Standby - it's based on Streams and generally looks like what you seem to be using now (sort of.) But it definitely has issues. You can also take a look at GoldenGate or SharePlex.
-
Best Way to port the data from one DB to another DB using Biztalk
Hi,
please suggest best way to move the data from one db to another DB using biztalk.
Currently I am doing like that, for each transaction(getting from different source tables) through receive port, and do some mapping (some custom logic for data mapping), then insert to target normalized tables(multiple tables) and back to update the status
of transaction in source table in sourceDB. It is processing one by one.
How/best we we can do it using bulk transfer and update the status. Since it has more than 10000 transaction per call.
Thanks,
VinothHi Vinoth,
For SQL Bulk inserts you can always use SQL Bulk Load
adapter.
http://www.biztalkgurus.com/biztalk_server/biztalk_blogs/b/biztalksyn/archive/2005/10/23/processing-a-large-flat-file-message-with-biztalk-and-the-sqlbulkinsert-adapter.aspx
However, even though a SQL Bulk Load adapter can efficiently insert a large amount of data into SQL you are still stuck with the issues of transmitting the
MessageBox database and the memory issues of dealing with really large messages.
I would personally suggest you to use SSIS, as you have mentioned that records have to be processed in specific time of day as opposed to when the
records are available.
Please refer to this link to get more information about SSIS: http://msdn.microsoft.com/en-us/library/ms141026.aspx
If you have any more questions related to SSIS, please ask it in
SSIS
forum and you will get specific support.
Rachit -
I have a iMac Desktop and MacBook Pro laptop. I generate my work related files on both of these machines. After a few days or weeks, I have new files on some folders on either of the machines that is not on the other machine. What is the best way to keep the files in these machines synchronized?
How did you transfer the files to the iMac. If you exported the files out of the MB library using Kind = Current you should get the edited version. Any other option may not.
If you want to keep the two libraries "synced" any photos you want to move to the iMac should be added to an album, connect the two Mac with a LAN, Target Disk Mode, Transferring files between two computers using FireWire, with WiFi. and use the paid version of iPhoto Library Manager to copy that album from the MB library to iMac library. It will also copy the original and edited versions, keywords, titles, etc.
OT -
What is the best way to keep the battery built-in last longer?
what is the best way to keep the battery built-in in macbook pro last longer???..
is it by plugged in as many times as we can..and discharge it to 80-90% a week..then charged it back?My favorite tip for longer battery life: Uninstall Flash
-
What is the best way to get the notes content from iphone 4 to 4s without doing a restore? i want the new phone to be totally new but not sure how to get notes content across. If I do a restore as I have when previously from one iphone to another it has shown (in settings, usage) the cumulative usage from previous phones so all the hours of calls on all previous iphones will be displayed even though its brand new. Anyone know how I can get my notes (from standard iphone notes app) to my new iphone 4s without restoring from previous iphone 4. Thanks for any help offered.
First, if you haven't updated to iTunes 10.5, please update now as you will need it for the iPhone 4S and iOS 5.
Once you're done installing iTunes 10.5, open it. Connect your iPhone to iTunes using the USB cable. Once your iPhone pops up right click on it. For example: an iPhone will appear and it will say "Ryan's iPhone."
Right click on it and select "Backup" from the dropdown menu. It will start backing up. This should backup your notes.
Please tell me if you have any problems with backing up.
Once you backup and get your iPhone 4S, you must follow these steps. If you don't follow these steps, you will not be able to get your notes on your new iPhone 4S.
Open up iTunes again then right click on your device (iPhone 4S). Once you do you will see a dropdown menu. It will say "Restore from Backup..." Select this and it'll ask for a backup, select it from the dropdown menu. For example "Ryan's iPhone - October 12, 2011." Pick that and it will restore to your backup. Do this when you get your iPhone 4S so you will not lose anything. Even though you're restoring, you're getting back, since you're getting the previous settings, notes, contacts, mail and other settings from your old iPhone. You'll still have Siri though! So, restore when you first get it. Also frequently backup your device, as it will be worth it. You can restore from a backup if something goes wrong or save your data for a future update.
Once you do that, you should have your notes on your new iPhone 4S and iOS 5.
Please tell me if you need any help.
I hoped I answered your questions and solved your problem! -
What is the best way to export the data out of BW into a flat file on the S
Hi All,
We are BW 7.01 (EHP 1, Service Pack Level 7).
As part of our BW project scope for our current release, we will be developing certain reports in BW, and for certain reports, the existing legacy reporting system based out of MS Access and the old version of Business Objects Release 2 would be used, with the needed data supplied from the BW system.
What is the best way to export the data out of BW into a flat file on the Server on regular intervals using a process chain?
Thanks in advance,
- ShashiHello Shashi,
some comments:
1) An "open hub license" is required for all processes that extract data from BW to a non-SAP system (including APD). Please check with your SAP Account Executive for details.
2) The limitation of 16 key fields is only valid when using open hub for extracting to a DB table. There's no such limitation when writing files.
3) Open hub is the recommended solution since it's the easiest to implement, no programming is required, and you don't have to worry much about scaling with higher data volumes (APD and CRM BAPI are quite different in all of these aspects).
For completeness, here's the most recent documentation which also lists other options:
http://help.sap.com/saphelp_nw73/helpdata/en/0a/0212b4335542a5ae2ecf9a51fbfc96/frameset.htm
Regards,
Marc
SAP Customer Solution Adoption (CSA) -
Hi I would like to show a presentation written on my macbook air on my television what is the best way to connect the two ?
Much depends on the available connectivity of your television.
If it has HDMI input available, all you will need is a minidisplayport to HDMI adapter, and an HDMI cable long enough to place the Mac in the desired proximity to the TV. The adapter is avaialble from the Apple Store online.
Provided the HDMI input on the television supports sound, and the model of your MBA supports it as well, make suree that your adapter is also supportive of sound, otherwise you will need to run separate cabling from the headphone jack of the MBA to TV sound input or external speakers.
This is a somewhat specific answer to a question without any requisite detail. You don't indicate the model or type of inputs on your TV, nor do you indicate the model/generation of MBA you have. -
Whats the best way to get the server name in a servlet deployed to a cluster?
Hi,
I have a servlet in a web application that is deployed to a cluster, just
wondering what is the best way to get the name of the node that the server is
running on at run time??
Thanks
Please try to modify the following code and test for your purpose: (check Weblogic
class document for detail)
import javax.naming.*;
import weblogic.jndi.*;
import weblogic.management.*;
import weblogic.management.configuration.*;
import weblogic.management.runtime.*;
MBeanHome home = null;
try{
//The Environment class represents the properties used to create
//an initial Context. DEfault constructor constructs an Environment
//with default properties, that is, with a WebLogic initial context.
//If unset, the properties for principal and credentials default to
//guest/guest, and the provider URL defaults to "t3://localhost:7001".
Environment env = new Environment();
//Sets the Context.PROVIDER_URL property value to the value of
//the argument url.
if(admin_url!=null){
env.setProviderUrl(admin_url);
//Sets the Context.SECURITY_PRINCIPAL property to the value of
//the argument principal.
env.setSecurityPrincipal(username);
//Sets the value of the Context.SECURITY_CREDENTIAL property to
//the value of the argument cedentials
env.setSecurityCredentials(password);
//Returns an initial context based on the properties in an Environment.
ctx = env.getInitialContext();
}else ctx = new InitialContext();
home = (MBeanHome) ctx.lookup(MBeanHome.ADMIN_JNDI_NAME);
ctx.close(); //free resource
// or if looking up a specific MBeanHome
//home = (MBeanHome) ctx.lookup(MBeanHome.JNDI_NAME + "." + serverName);
DomainMBean dmb = home.getActiveDomain(); //Get Active Domain
ServerMBean[] sbeans = dmb.getServers(); //Get all servers
if(sbeans!=null){
for(int s1=0; s1<sbeans.length; s1++){
String privip = sbeans[s1].getListenAddress();
sbeans[s1].getName();
sbeans[s1].getListenPort();
WebServerMBean wmb = sbeans[s1].getWebServer();
}catch(Exception ex){
"Gao Jun" <[email protected]> wrote:
>Is there any sample code? Thanks
>
>Best Regards,
>Jun Gao
>
>"Xiang Rao" <[email protected]> wrote in message
>news:[email protected]...
>>
>> Sure. You can use the Weblogic management APIs to query ServerBean.
>>
>>
>> "Me" <[email protected]> wrote:
>> >
>> >Thanks for your reply, i was hoping to find a better way for example
>> >a class in
>> >weblogic API.
>> >
>> >Thanks
>> >
>> >"Xiang Rao" <[email protected]> wrote:
>> >>
>> >>Physical: InetAddress.getLocalHost().getHostName()
>> >>Weblogic: System.getProperty("weblogic.Name");
>> >>
>> >>
>> >>"Me" <[email protected]> wrote:
>> >>>
>> >>>Hi,
>> >>> I have a servlet in a web application that is deployed to a
>cluster,
>> >>>just
>> >>>wondering what is the best way to get the name of the node that
>the
>> >>server
>> >>>is
>> >>>running on at run time??
>> >>>
>> >>>Thanks
>> >>
>> >
>>
>
>
Maybe you are looking for
-
Remote app no longer sees AppleTV and shares
I've noticed that the Remote App on my iPhone 4 looks different than it used to, so I guess it's been updated recently. Anyways, now I don't have AirPlay anymore in any video or audio apps. I haven't changed anything in terms of network set up, Apple
-
Mac Pro Display flicker & failure to boot
Hello people who are smarter than me. I have a 2008 Mac Pro 3.2/ 8CX 8800GT with the original Geforce video card installed. When I turn the machine on I get a grey screen with a black bar at the top, with no evidence of an actual boot (such as a dar
-
After OCR, search starts at bottom of each page and goes up
I am using Acrobat Pro XI and am using OCR (Exact image) on PDFs of scanned documents. For some reason, after the OCR is complete, when I search for words in the document, it is going to the last instance on a page and then searching *up* the page; w
-
Expoting H.264 from FCP 5.1 "Codec error"
The Problem: I am trying to export a QT movie from FCP 5.1 with the H.264 codec using "export/quicktime movie" and I get a "Codec error" message. The Situation: I am using FCP 5.1 to sequence imported QT movies I have made in Foto Magico (640x480-30
-
IPod Shuffle 2nd Gen. Doesn't copy the music into it
Hi, I used a different power source to charge my iPod then it doesn't copy the musics in it. but it turns on well and can be connected and detected in iTunes but it does not let me to copy the music and asks me for erase and sync but it frequently ha