Best way to create user interfaces

Hello Everyone,
So far my work with sap NetWeaver development was on the background processes but now i need to create some user interfaces, i read there are more than one way to do this like jsp, HTMLB , WebDynpro , and some others i think.
Can you give me some advises (and guides if it's possible) about what can i use?
The user interfaces must have the same look and feel as the SAP modules. I need to include some uploadcontrols, table views with sorting and paging features, buttons, list box, options buttons, check buttons, etc.
Also i need to send emails on demand and a task scheduler to send remaining by email.
Is there a user interface designer like dreamweaver or something like that to create user interfaces?
Hope you have some time to help me.
Regards.

Webdynpro java is best solution in userinterface devlopment
check the below links.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40239f38-a94a-2b10-c583-9b89187c3856
Send Email in webdynpro for java
http://help.sap.com/saphelp_nw04/helpdata/en/91/9c2226df76f64fa7783dcaa4534395/frameset.htm
SDN RSS Feeds spider using WAS Timeout Service
webdynpro sample tutorials
Now it is located under the link https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/web%20dynpro%20sample%20applications%20and%20tutorials.htm.
Koti Reddy

Similar Messages

Whats the best way to create USER variable in BI Apps?

I have just installled BI Apps and am trying to integrate EBS R12 with OBIEE 11g
We have USER variable already defined in the BI Apps rpd.
In EBS Security context init block i need to define USER variable, but when i define it... it says *'USER' has already been defined in the variable "Authentication"."USER"*
Whats the best way to create USER variable for EBS Security Context init block?
1) Delete the existing USER variable and then define a new one ( in this case all the places where USER variable is getting used in the rpd would become <missing>)
And i was told that it should not be done.
Let me know how can it be done.
Thanks
Ashish

Disable existing Init block and then double click on USER variable and hit on NEW... button to create new Init block
Thanks
Edited by: Srini VEERAVALLI on May 1, 2013 4:18 PM

What the best way to create User defined table with ADDON purpose

Hi folks, how are you ?
I´m beginner in development to business one, and I m studying to develop ISV addons.
But, during my exercises and analisys, I learned that have two ways to create tables and fields in business one. One way is throght by wizard in business one using Tools Menu > Configuration Tools > User Defined Tables >
Obs: I ´m using Business One Patch Level 9.
Other way, is create the tables and fields using DI API
But, my question is. When I develop one addon, or one UDO form that uses one set of user defined tables or used defined fields that where created by the first way (by wizard in B1), how I deploy this in other business one installation ? The package process will ensure the creation of this tables in another enviroment or I must implement the creation of user defined tables using DI API so that this code is called during the installation?
If in cases of addon develop I must use DI API to create user defined tables, How can I use my classes with this responsibility in package process ?
Thanks my friends.

Hi Renan,
You just need to put your logic in to the startup of your application, after you've established your connection to the UI API and DI API. All this will be triggered in the constructor of your main class.
namespace MyNamespace
public class MyAddon
bool runAddon = true;
bool initialised = false;
const string ADDON_NAME = "My Addon";
public static void Main()
        MyAddon addOn = new MyAddon();
        if(runAddon)
              System.Windows.Forms.Application.Run();
        else
         Application.Exit();
public MyAddon()
        // Connect to SBO session for UI
        if(!SetApplication()) runAddon = false;
private bool SetApplication()
        // Code goes in here to establish UI API and DI API connections
        // See SDK samples for examples
        // You should also define and filter the UI API events your addon will trap at this stage and create any menus
        // Call your routine to check if the required UDFs/UDTs exist on this company
        initialised = CheckInitialisation();
        if (!initialised)
           // AddOn not yet intialised on this company so prompt the user to run the intialisation process
          int iResponse = app.MessageBox("The " + ADDON_NAME + " addon will now create all required fields and tables."
                                         + System.Environment.NewLine + System.Environment.NewLine
                                         + "WARNING: It is strongly recommended that all other users are logged out of this company "
                                         + "before running this process. Are you sure you wish to continue?", 2, "Yes", "No", "");
          if (iResponse == 1) initialised = InitialiseAddOn(); // Call your routine to create the objects
        return true;
Kind Regards,
Owen

What is the best way to create 10000 users in ECC system

Dear all,
what is the best way to create 10,000 users in ECC 6 system.
As of my knowledge we can create with SECATT, but I don't know the procedure to use this.
please guide me...
Regards,
Raaja

Hi Raaja,
If you search in SDN or on google for eCATT tutorial, you will get all the info you need to learn to create them.
For 10000 users I would suggest the following
1. eCATT to create user ID's (include all the info like passwords, user groups in here).
2. eCATT to make the role assignment. Use SU10 to record the assignment to the users you created with the first script as it gives you more flexibility
If you have the data you need then you should be able to run both steps in 1 work day (dependent on system performance).
Edited by: Alex Ayers on Jan 25, 2009 11:16 AM

Best way to create a conact list from the user profile properties

We have a customer looking for a phone book utility, starting with a table showing main user information and with some search options. We would like o base it on the user profile properties and not to create an indipendent studion record browser porlet.
What is best way to create a conact list from the user profile properties ?

I did something like this using search. It can get messy, so you need to take care with it.
* Identify the properties you want to make accessible to search (ex: name, etc.)
- add them to the user property map
- flag them as searchable
* I broke down and used the native server API. I'd still suggest this approach.
* Write some simple code to do vcard export if you like
(my code is all in vb.net)
I really believe this is the "right" approach, but honestly, this was a bit painful and has been
messy for us given some other business issues. (to my chagrin we have users with 2-letter last
names...)
I have code you're welcome to poke at, but it's more or less slapped together and has various
different search methods commented out so you can see how I tinkered w/ the remote vs. server
API.
If you'd like it mail me at [email protected] and I'll send you a zipped copy w/ a
readme. I hope it may be useful to you as both a starting reference.

What is the best way to create a SSRS 2005 Line Chart Report for a 12 month period?

I'm looking for advice on how to create a SQL Server 2005 query and line chart report for SSRS 2005.
I need to display the peak number of patients assigned to a medical practice each month for a 12 month period based on the end-user selecting a
single month and year.
I've previously created a report that displays all patients assigned to the practice for any single month but I’m looking for advice on how to
how to produce a resultset that shows the peak number of patients each month for a 12 month period. I thought about creating a query that returns the peak count for each month (based on my previously created report which displays all patients assigned to the
practice for any single month) and then use a UNION statement to join all 12 months but I'm sure that isn't the most efficient way to do this. The other challenge with this approach (twelve resultsets combined via a UNION) is that the end-user needs to be
able to select any month and year for the parameter and the report needs to display the 12 month period based on the month selected (the month selected would be the last month of the 12 month period).
For the report I’ve previously created that displays all patients assigned to the practice for any single month, the WHERE statement filters the
resultset on two fields:
Start Date - The date the patient was assigned to the practice. This field is never null or blank.
End Date - The date the patient left the practice. This field can be null or blank as active patients assigned to the practice do not have an End Date. When the patient
leaves the practice, the date the patient left is populated in this field.
Using these two fields I can return all patients assigned to the practice during Nov 2012 by looking for patients that meet the following criteria:
start date prior to 11/30/2012 (using the last day of the month selected ensures patients added mid-month would be included)
AND
end date is null or blank (indicates the patient is active) OR the end date is between 11/1/2012 -11/30/2012 (returns patients that leave during the month
selected)
Regarding the query I need to create for the report that displays the peak count each month for 12 months, I'm looking for advice on
how to count patients for each month the patient is assigned to the practice if the patient has been assigned for several months (which applies to most patients). Examples are:
John Doe has a start date of 6/01/2012 and an End Date of 10/07/2012
Sally Doe has a start date of 8/4/2012 and no End Date (the patient is still active)
Jimmy Doe has a  start of 7/3/2012 and an End Date of 9/2/2012
Given these examples how would I include John Doe in the peak monthly count each month for May - October, Sally Doe in the peak monthly count for
August - December and Jimmy Doe in the peak monthly count for July – Sept if the end-user running the report selected December 2012 as the parameter?
Given the example above and the fact I'm creating a line chart I think the best way to create this report would be a resultset that looks like
this:
Patient Name
Months Assigned
John Doe
June 2012
John Doe
July012
John Doe
Aug 2012
John Doe
Sept 2012
John Doe
Oct 2012
Sally Doe
Aug 2012
Sally Doe
Sept 2012
Sally Doe
Oct 2012
Sally Doe
Nov 2012
Sally Doe
Dec 2012
Jimmy Doe
July 2012
Jimmy Doe
Aug 2012
Jimmy Doe
Sept 2012
From the resultset above I could create another resultset that would count\group on month and year to return the peak count for each month:
June 2012 - 1
July 2012 – 2
Aug 2012 - 3
Sept 2012 - 3
Oct 2012 - 2
Nov 2012 - 1
Dec 2012 - 1
The resultset that displays the peak count for each month would be used to create the line chart (month would be the X axis and the count would
be the y axis).
Does this sound like the best approach?
If so, any advice on how to create the resultset that lists each patient and each month they were assigned to the practice would be greatly appreciated.
I do not have permissions to create SPs or Functions within the database but I can create temp tables.
I know how to create the peak monthly count query (derived from the query that lists each patient and month assigned) as well as the line chart.
Any advice or help is greatly appreciated.

Thanks for the replies. I reviewed them shortly after they were submitted but I'm also working on other projects at the same time (hence the delayed reply).
Building a time table and doing a cross join to my original resultset gave me the desired resultset of the months assigned between dates. What I can't figure out now is how to filter months I don't want.
Doing a cross join between my original resultset that had two dates:
08/27/2010
10/24/2011
and a calendar table that has 24 rows (each month for a two year period)
my new resultset looks like this:
I need to filter the rows in yellow as the months assigned for stage 3 that started on 8/27/2010 should stop when the patient was assigned to stage 4 on 10/24/2011.
You'll notice that Jan - Sept 2011 isn't listed for Stage 4 assigned on 10/24/2011 as I included a filter in the WHERE clause that states
the Months Assigned value must be greater than or equal to the date assigned value.
Any advice would be appreciated.

Best way to create tasks and assign to sharepoint groups

Hi everyone, I have a custom list which contains newsletter info that is to be seen by around 400 groups (they are stores) and then I need them to mark each list item as 'completed'
I have been trying to figure out the best way to do this and decided to keep the custom list and somehow link it to a task for each item in the list. We have nintex so was thinking of creating a workflow to create a separate task for each group (store) so
they can mark it as completed.
Is this the best way to go about it or am I completely off track?
Basically all I need is a list which contains around 30 items and around 400 groups (stores) which contain users (store staff) to be able to mark items on the list as completed so it recognises that each store has completed each task.
Thanks

Hi ,
According to your description, you want to find the best way for creating tasks for 30 list items and assigning the task to around 400 groups.
For the workflow, it is heavy that you need to create around 12000 (30*400) tasks . In my opinion, the best way is to do with a custom timer job. For more information, you can refer to the
blog:
http://www.splessons.com/2013/12/create-a-timer-job-in-sharepoint-2013/
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support,
contact [email protected]
Eric Tao
TechNet Community Support

Best way to create DVD

I've exported a movie that I created in FCP 3 to a Quicktime file. I would like to burn the movie to a DVD that I can play on a DVD player. I've been trying to use iDVD 4, but its not recognizing the audio in my quicktime file. Is there another way to do this?

With all due respect, I fail to see how my comments are off the mark. iDVD has two settings... that to me is for consumers. How can any professional slice the art of compression into 2 settings? Compressor provides many more choices that a pro would probably use. And even Compressor isn't great as higher-lvl compression software, but at least its a start. The topic of this questions is BEST way to create a DVD, not the worst way, and clearly the BEST solution does NOT have iDVD in it. It's the same reason you don't edit in iMovie over FCP, it's the reason Windows users don't use MovieMaker. iDVD is a decent entry-lvl program, but frankly not cut out for anything above home video.
null

Best way to create SVG file from drawing application?

I am developing a drawing application that allow the users to draw and edit static two dimensional images such as Rectangles, Ellipses and Text. I have a superclass SVGShape that contains all the common features of a shape such as x1, x2, color etc. I then have SVGRectangle as a subclass of SVGShape.
I want to know what would be the best way to create an SVG file from this? An idea I have at the minute is to have an abstract method getSVG() in the SVGShape class, and then implement the method in the subclasses. I will then create a new class called SVGManager which iterates through the list of shapes (Btw I'm using MVC, my shapes are stored in a Collection) and uses the getSVG() mehtod in each shape to build up a SVG file.
What do you think of this? Any better ideas?
Thanks guys

I used a visitor for this in a similar project, so that when the svg library is used in a applet or browser and the writing functionality isn't required, it may be omitted from the bundle.
Pete

Best way to create a Keynote presentation for use in Windows Powerpoint?

Hi all, as mac users, I know we have all been here, I am being forced to use Powerpoint and a Windows machine for a presentation. I am wondering what is the best way to create a keynote presentation (on my mac), and export it to powerpoint (on a windows machine). The goal here is try to get as few errors and missing components of the presentation as possible. I frequently have to export and import documents through Microsoft word and pages, and everytime I open a doc I get a message saying that some things couldn't be imported. This cannot happen in this situation! This is a very important presentation that needs to go as smooth as possible. I am going to be presenting this presentation on a windows 7 machine running microsoft office 2010.
What extra steps should I take (if any) to make sure everything gets exported and imported correctly?
Thanks in advance,
- A Mac user under Windows Oppression

Thanks, the presentation went well. I just had to try out different transitions and animations to see which ones worked with Pp. But I'm going full keynote next time!
Happy Computing,
- A Mac user no longer under windows oppression

Best way to create a UI for a Composite app

Hi all,
What is the best way to create a UI for a Composite app that we are developing using CAF and GP.
1) WebDynPro Callable Object that implements GP Interface.
2) Consume the Application services(exposed as web services) in WebDynPro app
3) Creating a WebDynPro Model for the CAF Services.
4) Create a WebDynPro Application Callable Object (If yes how can we map the input and output params b/n WebDynPro app CO and CAF Application service).
Plz do remember we are using GP here.
Thanks in advance,
Best Regards,
Sudheer.

Hi,
You can use Web Dynpro or Visual Composer for designing UI for your CA.
1) WebDynPro Callable Object that implements GP Interface.
You can use Web Dynpro Component CO to use a single Web Dynpro component in your GP Activity.
4) Create a WebDynPro Application Callable Object :This is for entire Web Dynpro Application(multiple components).
2) Consume the Application services(exposed as web services) in WebDynPro app :
3) Creating a WebDynPro Model for the CAF Services.
For example, in updating operations first we have to get the existing data from Database.For getting this data you can use application services in your Web Dynpro component.Later expose this WD component as CO insert in a GP activity.
For creating operations, you can use Web Service CO(Application Service) directly in GP Activity.
These links are useful for you.
[link1|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/a00c07d0-61e0-2a10-d589-d7bc9894b02a]
[link2|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/10b99341-60e0-2a10-6e80-b6e9f58e3654]
[lnk3|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/1078e3b0-ec5d-2a10-f08a-c9b878917b19]

Best way to create a Contact Us form

What is the best way to create a contact us form?
I created mine using a table and the form sleection of DW CS6.
Thanks!
Janelle

Creating the form itself is really only half the job.
You can have a marvelous form created using html and DW's built in form items. Those items can be in a table, or not, that part is up to you. The next step is making the form "do something".
The simplest way to make a form work, is a mailto: link in the form action attribute, but it's the absolute worst way to go. Mailto: links require the viewer to have an email client installed and set up on the computer they're using to submit your form. If they don't (as in the case of Gmail, htomail, yahoo, etc mail users) when they click Submit, absolutely nothing will happen.
Another drawback of using a mailto: link for your form submission is that email address is now open to every spam email harvester on the internet. If you like certain "blue pill emails" then there wouldn't be an issue, but if you are like the majority of society, you won't be sending funds to any Nigerian doctors either and won't want to be spammed constantly.
Personally, I use the Formmail script, available for free at http://www.tectite.com for pretty much all of my html forms. As long as your server has PHP installed (most do) the Formmail script will work very well for you. They have a ton of "How To" info on their site and the script itself is very robust with loads of features you can use, or not, at your discretion. They also have a very well documented troubleshooting section and a searchable forum that take care of the most common issues you run into.
Your next step is "find out what server scripting language you have available on your server". From there, you'll need to find/write a compatible script, then attach your form to it.

Need help knowing best way to create record

What is the best way to create a new record... I have a form pulling info from about 20 tables. When the user wants to create a new record, I want a new form to open and allow them to select the values based on the foreign key fields so it makes more sense than just random numbers.
The problem I'm having is knowing when and how to insert. Should the "new record" form be it's own database block that inserts from within it. (but then when they go back to the original form they must requery to see the new value.) Or what about copying each field back to the original form. I'm new to forms and would appreciate any insight and tips.

would a wire like this help me?
I doubt it. You want FireWire.
Take look at the Canopus ADVC300. It comes with a nice Macintosh application that works flawlessly with iMovie 06.
http://www.canopus.com/products/ADVC300/index.php
Yes, it does cost more but it works.

Best way to provision users in LDAP on a schedule?

Hi,
I am trying to work out the best way to automatically create users in an LDAP resource. the sceanrio is as follows:
I have an authorititive directory from which I wish to pull users into IDM which is under my control. I have another directory which I want to provision users to. It does not have a changelog - I'm not sure that active synch will work? This directory is not under my control so I can't simply add one.
I want to update the list of IDM users nightly from the authorititive directory then push the changes to the other directory.
I read on here about per-account workflows, I have 10k accounts at present, but this is likely to grow quickly, so I guess that has to be ruled out on performance grounds?
Can anyone suggest a way to create users in the remote directory. could I have a workflow which iterates through all the IDM users and provisions an account if it doesn't exist? how would I configure and schedule this?
Thanks for your help,
Toby.
Edited by: Toby.ORourke on Jan 7, 2008 1:48 PM

You stated, "This directory is not under my control so I can't simply add one", can you expand on this? Do you not have an account to connect to this directory? Do you not have a resource adaptor for this directory? If you do not have a resource adaptor you will have difficulties connecting via sim, it is not impossible. You can connect to and ldap directory using the jndi api in java.
Your questions are of a larger design question that I feel might be out of context for this forum based on business rules we cannot answer.

Is there a way to create user logins or some other way to ...

Is there a way to create user logins or some other grouping for a set of applications to use (memory) resources optimally -- for example only mail and Safari and Word in one grouping and another for Safari and an audio recording application, etc.?

It is possible to use Parenal Controls to limit which applications can be used be a particular user account.
But it's not really necessary as far as managing memory.
Matt

Best way to create user interfaces

Similar Messages

Maybe you are looking for