Beta 2 Object Limits?

When trying to import a file from AI, I got the following message:
"The design file you have selected has too many objects to import into this beta version of Adobe Flash Catalyst.Please consider rasterizing complex groups or layers, then try importing it again."
What is the limit amount? Will this increase with beta 3? Or full release?
Thanks

I am trying to open my first AI project in Flash Catalyst but it is not being friendly to me (or I too it evidently)
I am getting the following error message when trying to open the Ai from Catalyst...
"The design file you have selected has too many objects to import to Adobe Flash Catalyst"
It then tells me I should flatten some layers.
I can't see this being the case because I only have 25 total layers comprising of:
2 simple rectangle paths w/gradient
2 arrow symbols
2 Jpegs
19 text layers
I'm on a running Snow leopard on a Mac Pro.
-Daniel

Similar Messages

Devicenet object limitations

Hello, We have a PXI with an 8461 Devicenet card as well as other cards running, communicated to by a third party software written in Labview 8.2.1. We are experiencing an issue when only 25 or so devicenet objects are capable of being loaded and communicated with. I know Devicenet can have up to 63 macIds, and we are not even close to loading that many and the application will just crash. Could it be a LabView resource limitation, bus issue... I do notice the CPU spike when loading the configuration for the Devicenet objects, have plenty of memory though. Anyone else experiencing a limitation when using LabView when communication with multiple devices on a single devicenet network.

There is definitely an object limitation of 50 including the Port handle so 49 objects for a one port device and 24 for a two port device per port.
The only solution for that is to use a second board in parallel. But I don't know your App. can handle that. Is ther eany kind of error message/number you are getting?
DirkW

Custom Object Limitations

Hello guys,
I am trying to document all the limitations of custom object and new features added in new releases of COD.
If anyone has any documentation or want to share some points, it will be greatly appreciated.
Thank you,
asmi

The number of custom currency in CO 1-6 is 25. The number of custom picklist in CO 1-6 is 100. The number of custom short text fields in CO 1-3 is 60. The number of custom short text fields in CO 4-6 is 90. The number of custom long text fields in CO 1-6 is 30. You will find a table providing this information (page 928-930) in the R17 Online Help document.

Which one is better null == object or object == null

I am just surffing on a google and i found one new thing which is new concept to me, but that concept is not cleared
Concept is, i found one place a class object is compaired with the null in following way
if( null == object)
Usually i used
if(object == null)
Problem :- What is the diffrance between these two condition and which one is better?

yawmark wrote:
corlettk wrote:
So... Just use the first way (by default) because that's how people are it reading accustomed to.Agreed. Just to point out, the reason commonly given for preferring (null == object) is that it prevents semantic errors such as (object = null), which is only a problem in Java in a minuscule number of cases.And the practice started in C (or maybe even an earlier language) where it's an issue in many cases. For example,
int i = 0;
if (i = 1) { ... }The "if" line is illegal in Java, but it's legal in C. If the programmer forgets the second = sign, then you get the above. Variable i gets a value of 1, and the expression i = 1 has a value of 1, which corresponds to true (whereas in Java, you can't use an int where a boolean is expected). So the if comes out true, when it should have been false (had we properly used if (i == 1)), and in addition, the value of i has changed when we didn't want it to.
In Java, this would be a compile-time error, whereas in C, it's a runtime error. Compile-time errors are easier to fix, and they don't get the opportunity to cause a problem after the software has been released.
In C, to turn this back into a compile time error, you could get in the habit of writing if (1 == i) Then if you forget the second = sign, you get if (1 = i) which is a compile-time error.
Because Java doesn't equate numerical zero with false and non-zero with true, this issue is, as yawmark demonstrates, much less of a problem in Java.

Better control object mask in appearance palette

The Appearance palette could use a better idea to signal the object mask.
This button can have two states as in the PS.
1 shows that the object already has a mask, 2. press will add his mask and mini palette displays the parameters of the mask.
It is worth remembering also that option in the Control palette.
This solution would also eventually be separated from the Parameter Properties Opacity masks.
Now it seems that every attribute is his mask? This is not true, that it is misleading.
Best Regards!

Shouldn't this depend on what the most reasonable or least surprising behavior of Windows is? I mean, it is fairly common for graphical Windows applications to let you move things either by dragging or by nudging with arrow keys. One could think of this as a part of Windows, rather than a part of programming LabVIEW. This is a philosophical point about user interfaces, but in discussing how a development environment should work, philosophical points about user interfaces are all important. And that is true whether or not at a detailed level it is the designers of Windows or the designers of the LabVIEW environment who are building the feature. In that light, wouldn't the least weird behavior be, when moving a graphical entity from one spot to another, that the method of moving doesn't matter? and ESPECIALLY that it doesn't matter in a way that isn't visible?
Whether nudging and dragging should have different final results is one question. Whether it is useful to float a control in front of a tabbed control without logically living inside it is another. The two don't have to be linked.
For that matter, here's a third: altenbach, why IS it useful to float a control in front like that? Could it be a surprising programming trick for which there are unsurprising and untricky alternatives? I don't mean this rhetorically - I really would like to know!

CRVS2010 Beta - C# objects as DataSource

Are there any examples of using C# objects as a report datasource? I've tried to follow the slightly outdated tutorial in the help docs, applied to my own project, but all I come up w/ is a blank report (except for static text fields). The primary problem is that the marked classes don't seem to show up in the field selector, only instantiated objects.
Here's a code snippet, if that helps - The list elements, which are inserted into the report in the details section, is correctly populated but nothing appears.
 private void ConfigureCrystalReports()
 // Create the list object on which to report
 PopulateCRLstReqSlcts();
 try
 crRepDocthis = new ReportDocument();
 crRepDocthis.Load(@"...\CrystalReportSMLTest.rpt");
 crRepDocthis.SetDataSource(DataBridge.instanceDataBridge.LstReqSlcts);
 crystalReportsViewer1.ViewerCore.ReportSource = crRepDocthis;
 catch(Exception ex)
 string strThis = "Viewer Load Failed " + ex.Message;
 MessageBox.Show(strThis);
 public void PopulateCRLstReqSlcts()
 // Create a new LstReqSlcts object and initialize it
 // Initialize requirement list
 DataBridge.instanceDataBridge.FillReqSlcts(DataBridge.instanceDataBridge.GetAllReqSlct());
// and some of my objects....
 public partial class DataBridge
 // Items for the Requirement Selector list box
 public class ReqSlct
 public ReqSlct()
 public ReqSlct(int nRSIDThis, string strRSNamThis)
 this.ReqSlctID = nRSIDThis;
 this.strReqSlctNam = strRSNamThis;
 public int ReqSlctID { get; set; }
 public string strReqSlctNam { get; set; }
 public override string ToString()
 return strReqSlctNam;
 [CrystalDecisions.CrystalReports.Engine.CrystalComplexTypeExpansionLevels(3)]
 public List<ReqSlct> LstReqSlcts { get; set; }

It sounds like you're trying to is report off of "object collections". Download the CR 2008 Developer Guide from the following link, and search for the term "object collection" (without quotes) and you will some info, including a tutorial, on how to report off of object collections.
http://help.sap.com/businessobject/product_guides/boexir31/en/crsdk_net_dg_12_en.chm
I hope this helps.

BitmapData object limitations

I'm developing a tile based side scrolling game (similar to
mario brothers) using the BitmapData object to create the map. the
problem is the maximum width the BitmapData object will support is
2880 pixels, which makes each level to short. I'd like it to be at
least 50% bigger.
Does any body know a way to increase this? Please help.

use more than one bitmap.

How to parse XML to Java object... please help really stuck

Thank you for reading this email...
If I have a **DTD** like:
<!ELEMENT person (name, age)>
<!ATTLIST person
 id ID #REQUIRED
>
<!ELEMENT name ((family, given) | (given, family))>
<!ELEMENT age (#PCDATA)>
<!ELEMENT family (#PCDATA)>
<!ELEMENT given (#PCDATA)>
the **XML** like:
<person id="a1">
<name>
 <family> Yoshi </family>
 <given> Samurai </given>
</name>
<age> 21 </age>
</person>
**** Could you help me to write a simple parser to parse my DTD and XML to Java object, and how can I use those objects... sorry if the problem is too basic, I am a beginner and very stuck... I am very confuse with SAXParserFactory, SAXParser, ParserAdapter and DOM has its own Factory and Parser, so confuse...
Thank you for your help, Yo

Hi, Yo,
Thank you very much for your help. And I Wish you are there...I'm. And I plan to stay - It's sunny and warm here in Honolulu and the waves are up :)
A bit more question for dear people:
In the notes, it's mainly focus on JAXB,
1. Is that mean JAXB is most popular parser for
parsing XML into Java object? With me, definitely. There are essentially 3 technologies that allow you to parse XML documents:
1) "Callbacks" (e.g. SAX in JAXP): You write a class that overrides 3 methods that will be called i) whenever the parser encounters a start tag, ii) an end tag, or iii) PCDATA. Drawback: You have to figure out where the heck in the document hierarchy you are when such a callback happens, because the same method is called on EACH start tag and similarly for the end tag and the PCDATA. You have to create the objects and put them into your own data structure - it's very tedious, but you have complete control. (Well, more or less.)
2) "Tree" (e.g. DOM in JAXP, or it's better cousin JDOM): You call a parser that in one swoop creates an entire hierarchy that corresponds to the XML document. You don't get called on each tag as with SAX, you just get the root of the resulting tree. Drawback: All the nodes in the tree have the same type! You probably want to know which tags are in the document, don't you? Well, you'll have to traverse the tree and ask each node: What tag do you represent? And what are your attributes? (You get only strings in response even though your attributes often represent numbers.) Unless you want to display the tree - that's a nice application, you can do it as a tree model for JTree -, or otherwise don't care about the individual tags, DOM is not of much help, because you have to keep track where in the tree you are while you traverse it.
3) Enter JAXB (or Castor, or ...): You give it a grammar of the XML documents you want to parse, or "unmarshall" as the fashion dictates to call it. (Actually the name isn't that bad, because "parsing" focuses on the input text while "unmarshalling" focuses on the objects you get, even though I'd reason that it should be marshalling that converts into objects and unmarshalling that converts objects to something else, and not vice versa but that's just my opinion.) The JAXB compiler creates a bunch of source files each with one (or now more) class(es) (and now interfaces) that correspond to the elements/tags of your grammar. (Now "compiler" is a true jevel of a misnomer, try to explain to students that after they run the "compiler", they still need to compile the sources the "compiler" generated with the real Java compiler!). Ok, you've got these sources compiled. Now you call one single method, unmarshall() and as a result you get the root node of the hierarchy that corresponds to the XML document. Sounds like DOM, but it's much better - the objects in the resulting tree don't have all the same type, but their type depends on the tag they represent. E.g if there is the tag <ball-game> then there will be an object of type myPackage.BallGame in your data structure. It gets better, if there is <score> inside <ball-game> and you have an object ballGame (of type BallGame) that you can simply call ballGame.getScore() and you get an object of type myPackage.Score. In other words, the child tags become properties of the parent object. Even better, the attributes become properties, too, so as far as your program is concerned there is no difference whether the property value was originally a tag or an attribute. On top of that, you can tell in your schema that the property has an int value - or another primitive type (that's like that in 1.0, in the early release you'll have to do it in the additional xjs file). So this is a very natural way to explore the data structure of the XML document. Of course there are drawbacks, but they are minor: daunting complexity and, as a consequence, very steep learning curve, documentation that leaves much to reader's phantasy - read trial and error - (the user's guide is too simplicistic and the examples too primitive, e.g. they don't even tell you how to make a schema where a tag has only attributes) and reference manual that has ~200 pages full of technicalities and you have to look with magnifying glas for the really usefull stuff, huge number of generated classes, some of which you may not need at all (and in 1.0 the number has doubled because each class has an accompanying interface), etc., etc. But overall, all that pales compared to the drastically improved efficiency of the programmer's efforts, i.e. your time. The time you'll spend learning the intricacies is well spent, you'll learn it once and then it will shorten your programming time all the time you use it. It's like C and Java, Java is order of magnitude more complex, but you'd probably never be sorry you gave up C.
Of course the above essay leaves out lots and lots of detail, but I think that it touches the most important points.
A word about JAXB 1.0 vs. Early Release (EA) version. If you have time, definitively learn 1.0, they are quite different and the main advantage is that the schema combines all the info that you had to formulate in the DTD and in the xjs file when using the EA version. I suggested EA was because you had a DTD already, but in retrospect, you better start from scratch with 1.0. The concepts in 1.0 are here to stay and once your surmounted the learning curve, you'll be glad that you don't have to switch concepts.
When parser job is done,
what kind of Java Object we will get? (String,
InputStream or ...)See above, typically it's an object whose type is defined as a class (and interface in 1.0) within the sources that JABX generates. Or it can be a String or one of the primitive types - you tell the "compiler" in the schema (xjs file in EA) what you want!
2. If we want to use JAXB, we have to contain a
XJS-file? Something like:In EA, yes. In 1.0 no - it's all in the schema.
I am very new to XML, is there any simpler way to get
around them? It has already take me 4 days to find a
simple parser which give it XML and DTD, then return
to me Java objects ... I mean if that kind of parser
exists....It'll take you probably magnitude longer that that to get really familiar with JAXB, but believe me it's worth it. You'll save countless days if not weeks once you'll start developing serious software with it. How long did it take you to learn Java and it's main APIs? You'll either invest the time learning how to use the software others have written, or you invest it writing it yourself. I'll take the former any time. But it's only my opinion...
Jan

Array size limitations... and prime number programs.

What are they? I am an ameteur programmer who wrote an extremely efficient prime finding program, if i do say so myself. The program doesnt find high primes, just prime numbers from 1-1,000,000,000 so far. Thats one version, the next version i use is faster, but because it uses an ArrayList, it can only do the primes 1-10,000,000. I am trying to work the programs up to primes with 50 or more digits, but ArrayList runs out of space, Integer is too small, I dont quite know how to switch all my code to be compatable with BigIntegers, and I cannot find a limit to arrays. I guess that I could find big primes if a) Integer was bigger, b)I tried, but what i wanted to do, because the second program is way more effecient, is to use an array to store primes instead of an ArrayList. The only problem? Arrays cannot be appended, so I need to know the limit in size for an array... So far, from my tests, I have found the limit to be somewhere around, 15,380,277. The only problem with this is that every time i compile, i can use a different number. So I would like it if a) somone could tell me the limit to an array's size, b) ideas for programs that can find primes with 50 or more digits, c) Down below is the code, could someone tell me how to convert it to BigIntegers?
private void primeFinder1root(int beg, int end){
 int tmp = 0;
 int counter = 0;
 int counter2 = 2;
 boolean flag;
 for(int n = 3; n < end; n+=2){
 if(n%5!=0){
 flag = true;
 for(int d = 3; d <= Math.sqrt(n) && flag; d+=2){
 counter++;
 if(n%d == 0)
 flag = false;
 if(flag){
 System.out.println(n);
 counter2++;
 tmp = n;
 if(counter2%100000 == 0)
 System.out.println(n);
 System.out.println();
 System.out.println("The program looped " + counter + " times. There were " + counter2 + " primes found. "
 + tmp + " was the last prime found.");
}That is the first progam that does not use an ArrayList, but is still extremely effecient, it only looped 1,744,118,556 times to find the primes 1-100,000,000 which seems like a lot, but it truely isn't. I realize that by using counters and printing, I am slowing the program down immensly, but i am fine with that.
public void primeFinder(){
 boolean flag;
 int tmp = 0;
 int tmp2 = 0;
 int counter = 0;
 primes.add(2);
 for(int n = 3; n < end; n+=2){
 if(n%5!=0){
 flag = true;
 for(int i = 0; i < primes.size()/2 && ((Integer)primes.get(i)).intValue() <= Math.sqrt(n) && flag; i++){
 tmp = ((Integer)primes.get(i)).intValue();
 if(n%tmp == 0)
 flag = false;
 counter ++;
 if(flag && n!=1){
 System.out.println(n);
 primes.add(n);
 tmp2 = n;
 if(primes.size() % 100000 == 0)
 System.out.println(n);
 primes.add(0, 1);
 System.out.println(counter + " " + primes.size() + " " + tmp2);
}This is the code that stores all the primes it finds in an ArrayList, and then compares all numbers to the ArrayList of primes. This is extremely more effecient than the first, looping only 278,097, 308 times to find the primes 1-10,000,000 (the other looped 868,772,491 times). I used 10,000,000 as my example because this program cannot go to 100,000,000 because there are 5,761,455 primes and the ArrayList can only hold ~4,000,000 objects. Because of this ~4,000,000 object limitation on the ArrayList I have set my sites on the Array. This is the reason why I want to know the limitations of an Array if you could please tell me. If you could also, I would like help making my code compatable with BigIntegers as well.
Well, sorry for the very long post, but thank you if you answer it and took the time to read it.
Dumber_Child

I too was in the quest to develop the most efficient prime number code few years ago when I was a student.
Here is a more fine tuned version for your code
 public static long findPrimes(int max, ArrayList out){
 long count=0;
 FastList primes = new FastList((int)Math.sqrt(max));
 primes.add(2);
 for (int i=3; i<=max; i+=2)
 int al_size = primes.size();
 double sqrt = Math.sqrt(i);
 boolean prime_flag =true;
 boolean loop_flag = prime_flag;
 for (int j=0; j<al_size && loop_flag; j++)
 int val = primes.get(j);
 if (i%val == 0)
 loop_flag = prime_flag = false;
 else if (val > sqrt)
 loop_flag = false;
 count++;
 if (prime_flag)
 primes.add(i);
 primes.addToArrayList(out);
 return count;
Following a data structure to store the prime numbers while processing
Since this holds first number of primes in an array instead of in an ArrayList
the get will work much faster and for those elements the casting is not required
 static class FastList
 ArrayList list = new ArrayList();
 int cache[];
 int pointer = 0;
 int fastAreaSize;
 public FastList(int fastAreaSize){
 cache = new int[fastAreaSize];
 this.fastAreaSize = fastAreaSize;
 public void add(int i){
 if (pointer < fastAreaSize)
 cache[pointer] = i;
 list.add(new Integer(i));
 pointer++;
 public int size(){
 return pointer;
 public int get(int i){
 if (i<fastAreaSize)
 return cache;
else
return((Integer)list.get(i)).intValue();
public void addToArrayList(ArrayList al){
for (int i=0; i<pointer; i++)
if (i<fastAreaSize)
al.add(new Integer(cache[i]));
else
al.add(list.get(i));
When running in my pc
above code detected primes within range 0-10000000 in 281809517 iterations within 6.718secs
while your original code did the same in 278097308 iterations within 13.687 secs.
By the way i removed the check for '5' thats why my code does more iterations.
Notice that I have relocated code like Math.sqrt and ((Integer).....).intValue() to reduce the re calculating the same thing. That saved a lot of time.

Fetching SDO_GEOMETRY-Objects very slow

Hi,
while fetching all rows from a table
with a sdo_geometry column
(like: "SELECT LINE_ID, GEOMETRY FROM LINES")
the number of rows received from the database decreases
extremely.
I receive the first 5000 rows in about 5 seconds
and the next 5000 rows in 1 minute.
Can anyone help me to get best performance always ?
(I'm using Oracle 8i on Win2000).

Hi,
This could be a lot of different things - lack of memory on the system, bigger (more coordinates) geometries in the second 5000, etc.
Also, 8.1.7 is pretty old, and more recent versions of Oracle do perform better with object in general, and spatial in particular.

OS 10.3 Beta

Can I upgrade my Q10 with OS 10.3 Beta and after reviewing downgrade is possible?
Help!
Solved!
Go to Solution.

We don't normally discuss leaked software here.
If you're loading the developer beta.. sure. Just know some functions of the beta OS are limited or not working by design, and yes you can always downgrade back afterwards.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

MSI Afterburner - why does my beta copy reports it's expiring?

Afterburner V2.2 beta - why does my beta copy reports it's expiring?
Do we have another software alternative other than AFterburner for the GTX 560 Ti Hawk?

This is not entirely correct. Only if you reset the system date you extend the expiration date, otherwise you'll get an error message like this.
and the program does not start.
Every beta has a limited time period to work.The expiration date of the 2.2beta8 is 27/11/2011.
But until then it'll be a new version released. So stay cool, or use the non-expiring version 2.1, or go back to the future with your system time.

Posix Performance Pack & file discriptor limitation

This question doesn't appear to relate to our Enterprise product, so I'm
responding to this message in the performance newsgroup as well. Please see
answers below:
Andy Ping wrote:
What is Posix Performance Pack about?This refers to the availability of enhanced I/O handling (enabled by default
with the Solaris version of WLS) and is documented at:
http://www.weblogic.com/docs51/admindocs/tuning.html#performance packs
>
And How to resolve the file dirscritor limitation? Is ulimit OK?The Solaris file descriptor limits are set using lines similar to:
set rlim_fd_cur = 1024
set rlim_fd_max = 8192
in your /etc/system file. In the above case, user processes are allowed 1K open
files by default and can up this limit to 8K files using the ulimit command.
You might have noticed that this command is used in the weblogic startup script
to accomplish this. Judging by your log entries, I'd guess that your tunables
are both set to 512. You might want to consider raising your maximum to 1K.
Perhaps other newsgroup readers can suggest/recommend better file descriptor
limits.
Environment: sun solaris 2.6, weblogic.5.1 jdk1.2.2_006, oracle815.
phenomena:
D??¨²?? ¨º??? 26 10:51:20 GMT+08:00 2000: < ListenThread > Listening on
port: 7001
D??¨²?? ¨º??? 26 10:51:20 GMT+08:00 2000: < Posix Performance Pack >
System has file descriptor limits of - soft: '512', hard: '512'
D??¨²?? ¨º??? 26 10:51:20 GMT+08:00 2000: < Posix Performance Pack >
Using effective file descriptor limit of: '512' open sockets/files.
D??¨²?? ¨º??? 26 10:51:20 GMT+08:00 2000: < Posix Performance Pack >
Allocating:'3' POSIX reader threads
If use jdk1.1.7b, the phenomena:
D??¨²?? ¨º??? 26 10:51:20 GMT+08:00 2000: < EJB > 0 deployed, 0 failed
to deploy.
D??¨²?? ¨º??? 26 10:51:20 GMT+08:00 2000: < HTTP > Log rotation is size
based
D??¨²?? ¨º??? 26 10:51:20 GMT+08:00 2000: < ZAC > ZAC ACLs initialized
D??¨²?? ¨º??? 26 10:51:20 GMT+08:00 2000: < ZAC > ZAC packages stored
in local directory exports
D??¨²?? ¨º??? 26 10:51:20 GMT+08:00 2000: < ListenThread > Listening on
port: 7001
D??¨²?? ¨º??? 26 10:51:20 GMT+08:00 2000: < Posix Performance Pack >
System has file descriptor limits of - soft: '512', hard: '512'
D??¨²?? ¨º??? 26 10:51:20 GMT+08:00 2000: < Posix Performance Pack >
Using effective file descriptor limit of: '512' open sockets/files.
D??¨²?? ¨º??? 26 10:51:20 GMT+08:00 2000: < Posix Performance Pack >
Allocating: '3' POSIX reader threads
D??¨²?? ¨º??? 20 00:58:28 GMT-05:00 2000:< E > < Posix Performance Pack >
Failure in processSockets()
java.net.SocketException: Connection reset by peer
at java.net.SocketInputStream.read(Compiled Code)
at weblogic.socket.PosixSocketMuxer.processSockets(Compiled Code)
at weblogic.socket.SocketReaderRequest.execute(Compiled Code)
at weblogic.kernel.ExecuteThread.run(Compiled Code)
D??¨²?? ¨º??? 20 00:58:28 GMT-05:00 2000:< E > < Posix Performance Pack >
Failure in processSockets()
java.net.SocketException: Connection reset by peer
at java.net.SocketInputStream.read(Compiled Code)
at weblogic.socket.PosixSocketMuxer.processSockets(Compiled Code)
at weblogic.socket.SocketReaderRequest.execute(Compiled Code)
at weblogic.kernel.ExecuteThread.run(Compiled Code)
D??¨²?? ¨º??? 20 00:59:23 GMT-05:00 2000:< E > < ServletContext-General >
Cannot find resource 'high_tech_area/front/file/htprog.css' in document root
'/opt/weblogic/weblogic/myserver/public_html'
D??¨²?? ¨º??? 20 00:59:28 GMT-05:00 2000: < ServletContext-General >
Generated java file:
/opt/weblogic/weblogic/myserver/classfiles/jsp_servlet/_high_tech_area/_fron
t/_bbs/_bbs_list.java
D??¨²?? ¨º??? 20 00:59:32 GMT-05:00 2000:< E > < ServletContext-General >
Cannot find resource 'high_tech_area/front/file/htprog.css' in document root
'/opt/weblogic/weblogic/myserver/public_html'
D??¨²?? ¨º??? 20 01:00:36 GMT-05:00 2000:< E > < Posix Performance Pack >
Failure in processSockets()
java.net.SocketException: Connection reset by peer
at java.net.SocketInputStream.read(Compiled Code)
at weblogic.socket.PosixSocketMuxer.processSockets(Compiled Code)
at weblogic.socket.SocketReaderRequest.execute(Compiled Code)
at weblogic.kernel.ExecuteThread.run(Compiled Code)
D??¨²?? ¨º??? 20 01:00:52 GMT-05:00 2000:< E > < Posix Performance Pack >
Failure in processSockets()
java.net.SocketException: Connection reset by peer
at java.net.SocketInputStream.read(Compiled Code)
at weblogic.socket.PosixSocketMuxer.processSockets(Compiled Code)
at weblogic.socket.SocketReaderRequest.execute(Compiled Code)
at weblogic.kernel.ExecuteThread.run(Compiled Code)
D??¨²?? ¨º??? 20 01:02:53 GMT-05:00 2000: < ServletContext-General >
Generated java file:
/opt/weblogic/weblogic/myserver/classfiles/jsp_servlet/_high_tech_area/_fron
t/_bbs/_bbs_list.java
D??¨²?? ¨º??? 20 01:02:54 GMT-05:00 2000: < ServletContext-General >
Generated java file:
/opt/weblogic/weblogic/myserver/classfiles/jsp_servlet/_high_tech_area/_back
/_hbk_perlaw/_hbk_perlaw_add.java
D??¨²?? ¨º??? 20 01:03:02 GMT-05:00 2000:< E > < ServletContext-General >
Cannot find resource 'high_tech_area/front/file/htprog.css' in document root
'/opt/weblogic/weblogic/myserver/public_html'
D??¨²?? ¨º??? 20 01:03:11 GMT-05:00 2000:< E > < ServletContext-General >
Cannot find resource 'high_tech_area/front/file/htprog.css' in document root
'/opt/weblogic/weblogic/myserver/public_html'
D??¨²?? ¨º??? 20 01:03:15 GMT-05:00 2000:< E > < ServletContext-General >
Cannot find resource 'high_tech_area/front/file/htprog.css' in document root
'/opt/weblogic/weblogic/myserver/public_html'
D??¨²?? ¨º??? 20 01:03:21 GMT-05:00 2000:< E > < ServletContext-General >
Cannot find resource 'high_tech_area/front/file/htprog.css' in document root
'/opt/weblogic/weblogic/myserver/public_html'
D??¨²?? ¨º??? 20 01:04:02 GMT-05:00 2000:< E > < Posix Performance Pack >
Failure in processSockets()
java.net.SocketException: Connection reset by peer
at java.net.SocketInputStream.read(Compiled Code)
at weblogic.socket.PosixSocketMuxer.processSockets(Compiled Code)
at weblogic.socket.SocketReaderRequest.execute(Compiled Code)
at weblogic.kernel.ExecuteThread.run(Compiled Code)
D??¨²?? ¨º??? 20 01:04:22 GMT-05:00 2000: < ServletContext-General >
Generated java file:
/opt/weblogic/weblogic/myserver/classfiles/jsp_servlet/_high_tech_area/_fron
t/_bbs/_bbs_list.java
D??¨²?? ¨º??? 20 01:04:28 GMT-05:00 2000:< E > < ServletContext-General >
Cannot find resource 'high_tech_area/front/file/htprog.css' in document root
'/opt/weblogic/weblogic/myserver/public_html'
D??¨²?? ¨º??? 20 01:04:33 GMT-05:00 2000:< E > < ServletContext-General >
Cannot find resource '/high_tech_area/back/hbk_perlaw/hbk_perlaw_list.jsp'
in document root '/opt/weblogic/weblogic/myserver/public_html'
D??¨²?? ¨º??? 20 01:04:45 GMT-05:00 2000:< E > < ServletContext-General >
Cannot find resource '/high_tech_area/back/hbk_perlaw/hbk_perlaw_list.jsp'
in document root '/opt/weblogic/weblogic/myserver/public_html'
D??¨²?? ¨º??? 20 01:05:31 GMT-05:00 2000:< E > < Posix Performance Pack >
Failure in processSockets()
java.net.SocketException: Connection reset by peer
at java.net.SocketInputStream.read(Compiled Code)
at weblogic.socket.PosixSocketMuxer.processSockets(Compiled Code)
at weblogic.socket.SocketReaderRequest.execute(Compiled Code)
at weblogic.kernel.ExecuteThread.run(Compiled Code)You will probably want to select your WLS/JDK environment using the platform
support information at:
http://www.weblogic.com/platforms/index.html#solaris
Hope this helps.
-Charlie

Use of the ordered metadata extension

Hey Kodo,
I noticed your ordered and order-column extensions in the manual. I'd
really, really, really like to use these props for a Vector of child objects
so I don't have to maintain the order column myself. The documentation
mentions however that these properties are not available for 1-many Object
collections but only for collections of simple values etc. Can you tell me
whether future versions of Kodo will support this, and if so, when?
Greetings,
Martin van Dijken

David-
Better yet, this limitation no longer exists in 3.0.
In article <[email protected]>, David Ezzio wrote:
Hi Marc,
It's more than six months later, and this is an important insight that needs to be in your
documentation.
David
Marc Prud'hommeaux wrote:
Martin-
The documentation is a bit misleading: we do support the order column in
relations. The only limitation is that you cannot have the one-to-many
optimization with the "inverse" attribute and use ordering at the same
time. But if you have a join table (or use Kodo's default generated
schema), then you should be able to specify ordering on your relations
just fine.
In article <b2d9o4$cdn$[email protected]>, Martin van Dijken wrote:
Hey Kodo,
I noticed your ordered and order-column extensions in the manual. I'd
really, really, really like to use these props for a Vector of child objects
so I don't have to maintain the order column myself. The documentation
mentions however that these properties are not available for 1-many Object
collections but only for collections of simple values etc. Can you tell me
whether future versions of Kodo will support this, and if so, when?
Greetings,
Martin van Dijken
Marc Prud'hommeaux [email protected]
SolarMetric Inc. http://www.solarmetric.com
Marc Prud'hommeaux [email protected]
SolarMetric Inc. http://www.solarmetric.com

Sending a large amount of data over a post

Hi.
I'm trying to send a large amount of text (about 400,000 characters) with a post to a servlet running in Tomcat. For debugging my servlet just writes the data to standard out and a text file.
The problem is, I get about 2048 characters printed correctly and then a long stream of garbage.
Has anyone seen a problem like this, or know of any limitations of the length of a post?
Thanks,
Jerry

there might be a limitation for reading input text
u better use object input stream for reading.....
any more idea do mail me
[email protected]

Beta 2 Object Limits?

Similar Messages

Maybe you are looking for