Better format for the AppDefinition XML file
Hello,
We are using CVS as our source control and are having some problems with the merge process on a AppDefinition file. Is there a way to achieve a better-readable format (i.e. shorter lines, better element indentation, perhaps even attributes indentation) for that file?
Best regards,
Igor Gorbunov
Steven,
I'd like to propose an enhancement request that JAG perform the formatting as do other XML wizards in JDeveloper. It is important for situations such as ours where we have a single application definition with over 60 groups. The unformatted app definition XML file is over 4700 lines and it takes JDeveloper over 12 minutes and 40 seconds to reformat it. With multiple developers and frequent commits, this is a bit ponderous.
We've found that all files other than the app definition merge gracefully or allow easy resolution of merge conflicts. The recent JHS blog entry about version control helped us validate our approach, by the way.
If JAG were to perform the formatting, it would also be easier to fix nuances in the app definition editor such as when you change a bound item to an unbound item, the attributename property of the item is sometimes retained and we need to edit the XML file to remove it. (oops, sorry, that should probably be a different entry in this forum)
Peter Koletzke
Similar Messages
-
Ant for the build.xml file
when we give the ant command then what the background task perform?..
how ant start parsing the build.xml file ?Go to ant.jakarta.org. They have numerous tutorials. Do some research first. If you run into an actual problem, then post what it is.
- Saish -
Which is the better format for message handling - flat files or SOAP?
We have the possibility to specify from our EDI partner how to send messages into XI. We can ask them to send the messages in as SOAP or flat files.
Is there a definite preference for one format over the other? Can somebody advise with reasons?
BR,
Tony.>>We have the possibility to specify from our EDI partner how to send messages into XI. We can ask them to send the messages in as SOAP or flat files.
I would strongly suggest you go with SOAP rather than File.
Reason : In case of file, the EDI partner will send a file to a machine in your network where FTP server is running and you make your XI server poll the particular folder every 10 min or so. But in case of SOAP, the <b>communication is real time</b>. Your EDI partner can invoke either the SOAP adapter directly or send a SOAP msg directly to Integration Server.
Just my ideas.
Regards,
Jai Shankar -
URGENT: XML-SQL: Error parsing different date formats in the same XML file.
Hi Everyone,
I have a big problem while using the XML-SQL utility. I have a XML file with different date formats. I get exception like the one below.
"oracle.xml.sql.OracleXMLSQLException: 'java.text.ParseException: Unparseable date:"
And the XML file is :
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<Info Key="ID">
<Insert>
<ID>1</ID>
<BookingDate>10.12.2001</BookingDate>
<OpeningTime>19:16</OpeningTime>
</Insert>
</Info>
I have tried using different setDateFormat which is contrary.
sav.setDateFormat("d.M.y");
sav.setDateFormat("H:m:s");
Can someone help me on the same.
Thanks in advance.
Subramanian.You might have to describe the columns as varchar then modify the table to the right format.
-
Validating against schema file for the output XML file
Hi,
I am using XSLT for mapping. The output message is generated according to the mappings but it is not validate aganist schema of target . I am using xsd file from external defination section as target. Can any body help me in this regard.
Thanks,
Mallikarjun.Mhi,
if you talk about the schema of a target message type
than validation only works if you use graphical
message mapping
not with: xslt,java, abap
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI FAQ - Frequently Asked Questions</a> -
Add an extra line in the output xml file
Dear All
My scenarios is idoc to xml file.For the resultant xml file i have to append a line <?Test Line?> after
<?xml version="1.0" encoding="UTF-8" ?> while passing it to legacy system ?
How generate such a xml file in xi?
Any help would be appreciated
Thanks and regards
udayDear All
my requirement is to generate an xml file which looks similar to
<?xml version="1.0" encoding="UTF-8"?>
<?TestLine?>
<test_mt>
<field1>123</field1>
<field2>234</field2>
</test_mt>
how to add <?TestLine?> tag?
Hi shabrasish and rajashekar
i am new to java and xslt mapping can you guide me or give me links which are similar to my requirement how to proceed with this kind of mapping
thanks
uday -
Where is the web.xml file in Tomcat 5.5
hi folks,
i made a small appl in Tomcat 5.5 named "Name". I made a WEB-INF folder inside the Name folder (which obv is inside the webapps folder), which inside had the classes and lib folder. After running the application where do i look for the web.xml file controlling my appl?
thanx in advance..well, the web.xml file must be done for you. Its specific to your project, you wont find in on other folders of tomcat.
-
About the build.xml file in EJB's
Hi,
I want to know where is the DTD for the build.xml file in the EJB examples.
Any help in this matter is highly appreciated.http://jakarta.apache.org/ant/
"satish" <[email protected]> wrote in message
news:[email protected]..
>
Hi,
I want to know where is the DTD for the build.xml file in the EJBexamples.
>
Any help in this matter is highly appreciated. -
Hello Anybody, I have a question. Can any of you please suggest me how to make an xml file from the database table with all the records?
Note:- I am having the XSD Schema file and the resulted XML file should be in that XSD format only.The Oracle documentation has a good overview of the options available
Generating XML Data from the Database
Without knowing your version, I just picked 11.2, so you made need to look for that chapter in the documentation for your version to find applicable information.
You can also find some information in XML DB FAQ -
I have tried a lot to find an app or some way in email to attach multiple of pdf files in one email. I could not find anything that sends multiple pdf file in one email and still keeping the file in simple pdf format for the recipient.
I am not aware of a way except for photos that allows you to select multiple files in an email. I even checked settings in the Adobe Reader app, and it does not show that ability.
-
Possible elements in the instanceconfig.xml file for presentation services
g'day
Has anyone here come across a list of all the possible elements that can be put in the configuration file for a presentation service, instanceconfig.xml ?<P>
I have found next to nothing in the documentations, about what can be configured there.<P>
What I am specifically after is: How can I change the default listening port for the Presentation Service? The default port is 9710 and I want to move to another port.<P>
Also, how can I move the JavaHost from the default port 9810? I can change the file <i>OracleBI/web/javahost/config/config.xml</i> to reflect the change. Once the JavaHost has been restarted it starts up on the expected port, but the Presentation Service still tries to communicate over RPC to port 9810. How do I configure the presentation service to search for the JavaHost on a non-default port?<P>
I have boiled it down to my original question: What are the possible values I can configure in the instanceconfig.xml file?<P>
Any comments here would be great.<P>
Cheers,<br>
BorkurSo, I had a little breakthrough here.
I found in the OBIEE deployment guide, page 142:
To change the Presentation Services listener port
1 Open the instanceconfig.xml file for editing.
2 Locate the <WebConfig> element.
3 Within the <WebConfig> tags, create the element <RPC> and assign it the RPC Listener Port
value for the BI Presentation Services instance, as shown in the following example.
<WebConfig>
<ServerInstance>
<RPC>
<Listener port="9715" />
</RPC>
</ServerInstance>
</WebConfig>
NOTE: In the preceding example, the RPC Listener port for the BI Presentation Services instance
has been changed to port 9715 from the default of 9710.
4 Save changes to the file.
This almost works. The RPC element has been deprecated, as was reported in the sawserver.out.log:
The configuration entry 'RPC/Listener' is deprecated. Please refer to the admin guide for more information.
What I then did was to just remove the RPC elements and leaving the Listener element straight under there ServerInstance element. This seems to have solved the problem.
I still have to figure out how to let the Presentation Service know that I have moved the JavaHost to antoher port ...
Cheers,
Borkur -
I have been working on the same numbers file for the past few weeks. The last time I opened it was 1 week ago. Today when I tried to open it I am unable and getting a message that the file is invalid and the index.xml file is missing.
Hi Tracie,
I upgraded to Maverick OS X 10.9.5, numbers spreadsheet is saved. Upon re-opening, it appears to be frozen, a warning "file is invalid as index.xml file is missing". I checked, and the file is not "locked". This appears to occur only with using the new numbers app. When I open previous spreadsheets from old iWorks, no such problem occurs.
How did you resolve your problem?
Would appreciate any help here.
Thanks,
Deehay -
Anybody know what's up with the menu.xml.files not being available for DW after installing on a new comp?
Usually that error can be cleared up by renaming the personal config folder. Turn on your OS's hidden files and then go to...
C: > Users > your username > AppData > Roaming > Dreamweaver (version) > your language > configuration
Rename the configuration folder configuration-old and start DW up. That should create an entirely new configuration folder and correct the menu.xml file. -
Where can I find the config.xml file for my Edge project?
Or is that a nonsensical question?
Basically, I am producing a very simple iPad app using Edge and PhoneGap Build. It's all good to go apart from the orientation - I want to be able to lock it to portrait. On researching, it appears that I need to specify the web build/app as portrait in the config.xml file - so where would I find this?
Thanks!I am not familiar with the phonegap process but I suspect the file you should be attempting to modify is called manifest.xml.
Example, see someone else's solution posted here. jQuery Mobile lock orientation - Stack Overflow
hth
Darrell -
How can I get the directory.xml file for WL6.0?
I have installed the ALBPM Enterprise WL6.01 and started it in my server.But I get the error message when I login.
directory configuration runtime fails to initilize with
resource:/Aqualogic/j2eewl/tomcate/webapps/../../webapps/webconsole/WEB-INF/directory.xml
How can I get the XML file?aaa, ok i misunderstood your first post, i thought you are talking about unable to use the directory.xml from your application.
Ok, well the directory.xml file that ALBPM uses is allways in /albpm6.0/j2eewl/conf/directory.xml if we are not talking about Standalone. And when you start your albpm server it picks up the directory.xml file from there. But it picks him up only when you start it...so if you made any changes to it, you have to restart the server.
You should check the instalation folder of your ALBPM.
If you want to change the user/pass in the directory.xml change it in that folder and restart ALBPM.
If you don't know how to enter new password you have to use this sintax:
<encrypt>newPassword</encrypt>
Because if you open the xml file you have only <encrypted> tags, and you can't change those.
I don't know what the xml file is doing in that tomcat folder though...maybe it get's copied to that location when you start the albpm WL
Hope this helps
Edited by Lex_ at 12/13/2007 10:27 PM
Maybe you are looking for
-
Retrieve data from a text file, incrementing the last value and save new value below
Hi This was working initially. It is part of my LabView Project. I was trying to create a unique number that increments every time the adds the value to the list. It works on computer perfectly. But when I put this on a PDA, it seems to create a blan
-
I can't get my project to share to a DVD. A pop up screen comes up saying, "This item can't be shared while it is still referencing media on the camera". Does anyone know what this means. I'm confused because I don't have a camera hooked up to my com
-
STOP "determining gapless playback info": how to get rid of it?
I have itunes 7 with macbookpro and 80 gigs of music on an external hard drive connected through USB to my Airpot Extreme 802.11n base. I CANNOT USE itunes because it is endlessly "determining gapless playback info" (i'm using the French version who
-
Does anybodys iphone 4s get very hot when using devices such as camera?
The side of my new iphone 4s get so hot on the top corner you cant keep you finger on it when using my camera. I know there is a problem with the battery but mine drops so fast it rarely lasts the day. Is their anything i can do now?
-
What FM retrieve inner authorization object BBP_ROLE using the user's role
Hi Experts! Do you know what Function Module can be use to retreive the inner authorization object BBP_ROLE using the user's role e.g. BUYER : YT:PU:XXXX:BUYERROLE Object : BBP_ROLE SRM: User function / Role field name : BBP_ROLE SRM: