BEWARE of using stopwatch or timer in iphone 5 under iOS7. As the mili second digit ticks really fast, in a matter of minutes, it will break your LCD under that mili second area. It happened to my iphone5. Let me know if you have same issue.

You two are obviously talking about the LCD pixels being killed. What exactly does it look like?
How many minutes are you talking about, 2 to 3, 5 to 7 or more?
Where was the brightness control at for the both of you?
KOT

Similar Messages

Since upgrading to iOS 6 my iPhone now does not connect to my 2013 elantras Bluetooth set up where as with the previous version of iOS it connected seamlessly. Please let me know if you have any solutions. Thanks

Since upgrading to iOS 6 my iPhone now does not connect to my 2013 elantras Bluetooth set up where as with the previous version of iOS it connected seamlessly. Please let me know if you have any solutions. Thanks

Have you checked to see if Elentra has a firmware update since the new iOS release?

Looks like a bug in SAP code - Please let me know if you have faced it

Hi All,
My requirement - to protect a range in excel sheet and download the excel to PC
but this particular method provided by SAP does not work
CALL METHOD spreadsheet->protect_range
       EXPORTING name      = name
                 protect   = protect
                 no_flush = no_flush
       IMPORTING error     = error
                 retcode   = retcode.
The full sheet protection method does work. Please let me know incase you have come across this issue.

JUST FOUND THIS ON NEWEGG!
Rating: 1/5Major problems, but HP added free warranty support to fix
This review is from: HP Pavilion Elite HPE-400F (BT470AA#ABA) Desktop PC Phenom II X4 945 (3.0GHz) 8GB DDR3 1TB HDD Windows 7 Home Premium 64-bit
Pros: HP is offering a North America Limited Warranty Service Enhancement which extends the warranty on these because of numerous reported issues! Free motherboard replacement.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03199423&cc=us&dlc=en&lc=en&product=4300938
Cons: Numerous users report blue screening, random reboots, or no boot without beeps!
BUT I HAD TO STUMBLE ON TO THIS, AFTER MINE QUIT!
NOW THEY SAY, SORRY, ALL OUT OF THEM, AND YOUR OUT OF WARRANTY, AND S * * * OUT OF LUCK & $800.00!!!!!!!!!!!!!

Firefox 4 is not for me as it is; lost all my toolbars and just could not get on with it and have had to go backe to 3.6.16; let me know when you have made version 4 more friendly

Downloaded version 4. Lost my toolbars, back button et.c Home button in the wrong place and could not move it and without requesting it I ended up with Yahoo which I did not want. How do I download Firefox 4 and keep all my toolbars as they were, at present is seems to be a very unfriendly upgrade?
John S

I have the same problem. It was literally snuck in as a simple update and suddenly I couldn't upload any of my assignments. You can get rid of 7 by going to control panel and removing the Mozilla file. then look for the FF 6 upload. I warn you though. It REALLY wants to be 7. Don't allow any updates to happen or you will be in the same position.
I like Firefox and it is truly disappointing that they would force this situation. My nest step is back to IE 8 which wants to be 9. Arghh!

I'm not able to enrol in a iOS developer program as individual. My browser says too many redirects. I'm using the Safari Browser. Please let me know how to solve this issue.

I'm not able to enrol in a iOS developer program as individual. My browser says too many redirects. I'm using the Safari Browser. Please let me know how to solve this issue.

Further to my earlier post, I have just read an entry noting that if you already own a domain name, and ask your hosting service to forward and mask your iWeb '08 created, web.mac.com site to your personal domain, chances are that due to the masking of the site on web.mac.com, Safari browsers interpret the masking as being the end of the site, and as such, just return a blank page?
This may explain the problem. However, call me old fashioned, and possibly a little naive, but surely this cannot be the problem?? It's OK in Firefox!

The application "Numbers" can't be opened. I have used numbers many times before and cannot currently open the application.

The application “Numbers” can’t be opened. i have used numbers many times before and cannot currently open the application. My Mac is a 10.9.4 Mac.
thank you, Mary

Hello maryfromkailua,
Unresponsive apps can be frustrating. After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning app issues:
OS X Mavericks: If an app freezes or quits unexpectedly
There are several solutions to try.
If the app is frozen, force quit the app. Press Option-Command (⌘)-Esc, select the app, then click Force Quit.When you force an app to quit, you may lose unsaved changes.
If the app quit, reopen it by clicking Reopen in the dialog that appears.
Restart your Mac.Methods for starting up your Mac
Read the app’s documentation to check if it’s compatible with your version of OS X.
Open another file in the app. There may be a problem with the original file.
Check for updates to your software.Keep your Mac up to date
Disconnect any peripheral devices you just connected (for example, a printer). They may not be compatible with your version of OS X.
Uninstall any app plug-ins or enhancements from other manufacturers.If you recently updated the app or OS X, a plug-in or enhancement you installed may no longer be compatible.
Use Apple Diagnostics or Apple Hardware Test. These tools can tell you if hardware you installed, such as additional memory, is incompatible, improperly installed, or defective.Use Apple Diagnostics or Apple Hardware Test
Restart your Mac in safe mode.Start up in safe mode
Use Disk Utility to repair your computer’s internal disk.
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

I am using ios 5 in my iphone 3g and all the apps that i have before is not working

i am using ios 5 in my iphone 3g and all the apps that i have before is not working plz help !!!!!!!!!!!!!!!

Hi
Update the applications thru App Store

I want to get comcast i want to use either my time capsule or air port as the gateway can i do that

I'm thinking about getting comcast internet but I don't want to buy their modem can I use either my time capsule or air port as the gateway

You can use a Time Capsule or any other AirPort Base Station for your wireless router, but you still need a modem.

I have an iphone 4 softbank carrier and would like to know if you have to unlock to use any carrier

I have an iphone 4 softbank carrier and would like to know if you have to unlock to use any carrier

Softbank does NOT offer unlocking. You cannot ever use that phone on another network. You will need to purchase a different phone if you wish to use another carrier.

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

I would like to know if you have to back up a macbook hard drive, can I use a external hard drive that has been previously used to back up several pc 's, or is it best to have a separate external drive for the Mac?

In the Mac side of things, backups usually come in two flavors: clones or incrementals.
A bootable clone is a bit-for-bit copy of all essential files in the startup volume. If using the Lions, clones can be made using CarbonCopyCloner or just plain old Disk Utility. These backups represent the safest protection of your info, but take the longest to do. Recovery is an inverse process: you copy the clone back into the internal drive.
Incremental backups start with a complete backup of the startup volume and only copy whatever changed from the previous run. OS X includes the fully integrated Time Machine backup utility to do this. It is extremely easy to do and takes the least amount of time. Recovery is another matter altogether since you have to start with a freshly installed instance of the OS and have to apply all intervening backups to bring the result to the latest saved version.
As for where the backup takes place, the recommended media is an external dedicated drive or drives connected via the fastest interface available on your Mac: Thunderbolt, USB3, Firewire, or USB2. Network-based backups, wired or wireless, are attractive but may not offer the same performance and hence take longer. Also important to note that the entire drive need not be completely dedicated to a single backup. The Mac's EFI firmware infrastructure allows for an unlimited number of partitions on a hard drive and each can be used for either type of backups.
Holler if you need specifics on how to do each. This was just an executive summary.

How do I stop all of my music in my itunes library syncing to my iphone 5 even when the songs aren't ticked?

How do I stop all of my music in my itunes library syncing to my iphone 5 even when the songs aren't ticked?

The frustrating part about the restore is that is seems to be finished when it in fact is not. The restore will look "finish" and your phone will be at the Swipe to Unlock screen. If you swipe and look at your home screen at this point of the restore, you'll see everything is not quite right. While the process seems to be not doing anything just leave the phone attached and do something else for about an hour. This part of the process is not mentioned during the restore operation. I believe there are about two steps to the restore process: 1) restore the phone settings (ringtones, background, notification settings, etc.) and give the user the unlock screen; 2) without letting the user know there is still more to do, begin the slow process of restoring all the music, movies, apps and what not. It's this second step that causes the confusion. Nothing lets you know to wait that process out. I've restored a couple devices from a computer backup and the 2-step process looks the same.

Hello! When on my iphone 5s 64g I quit any app I can see a bizzare flash line in the top screen. Do you have same remark?

Hello! When on my iphone 5s 64g I quit any app I can see a bizzare flash line in the top screen. Do you have same remark?

Hey Kazhmukhan,
Thanks for the question. To troubleshoot this issue, let’s restart/reset your device:
Turn your iOS device off and on (restart) and reset
http://support.apple.com/kb/HT1430
If your issue persists after restarting, let’s backup and restore your device:
Choosing an iOS backup method (Should I use iTunes or iCloud to back up my iOS device?)
http://support.apple.com/kb/HT5262
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Thanks,
Matt M.

To add meta tags, you open your published .html pages with TextEdit or any other text editor and modify as required. You have to do redo it each time you republish. Ihow do I do this? I need step by step instructions

To add meta tags, you open your published .html pages with TextEdit or any other text editor and modify as required. You have to do redo it each time you republish. I need step by step instructions on how to accomplish this please .

Rage Sitemap Automator and iWeb SEO Tool are two different applications.
Use SEO Tool to add the title tag and meta description. These need to be added to the html file for every page of your website. SEO Tool stores all these so that when you republish you only need to add tags to any new pages and click the re-apply button to refresh the existing ones.
Once you have added. refreshe the tags with iWeb SEO Tool and uploaded the files with your FTP application, then open the site in Sitemap Automator and create and upload a new sitemap.
Once you have set up accounts with Google, Yahoo and Bing, verified your site with each and submitted a sitemap, on subsequent publishing Sitemap Automator will resubmit the sitemap with one button click. It will also notify Ask.com whch doesn't require an account since you can add your domain name to this URL to ping them...
http://submissions.ask.com/ping?sitemap=http%3A//www.domain.com/sitemap.xml

[svn] 1384: Splitting DefineFont into the various DefineFont 1, 2, 3, etc SWF tag formats but retaining a common base DefineFont class so that embedded fonts are still retained as symbols for the SWF dictionary no matter what version of the SWF tag is us

Revision: 1384
Author: [email protected]
Date: 2008-04-24 07:54:58 -0700 (Thu, 24 Apr 2008)
Log Message:
Splitting DefineFont into the various DefineFont 1, 2, 3, etc SWF tag formats but retaining a common base DefineFont class so that embedded fonts are still retained as symbols for the SWF dictionary no matter what version of the SWF tag is used.
Also improving [Embed] so that it can recognize .TTC files as assets (previously these were only recognized through CSS @font-face rules).
QE: Yes, please add a test case for using [Embed] to embed fonts from a TTC file in addition to our tests for @font-face. Note that the AFEFontManager must be configured for this scenario.
Doc: No
Checkintests: Pass
Mxunit: AtEmbed Font suite: Pass
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/media/AbstractTranscoder.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/media/FontTranscoder.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/util/MimeMappings.java
flex/sdk/trunk/modules/compiler/src/java/flex2/tools/PreLink.java
flex/sdk/trunk/modules/swfutils/src/java/flash/fonts/CachedFontManager.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/Dictionary.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/MovieEncoder.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagDecoder.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagEncoder.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagHandler.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/TagValues.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/builder/tags/FontBuilder.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFont.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFontAlignZones.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFontInfo.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tools/SwfxPrinter.java
Added Paths:
flex/sdk/trunk/modules/swfutils/src/java/flash/fonts/DefineFont3Face.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFont1.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFont2.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFont3.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tags/DefineFont4.java
Removed Paths:
flex/sdk/trunk/modules/swfutils/src/java/flash/fonts/DefineFontFace.java

Running the script by python2 solves it for me:
su - mythtv -c "nice -n 19 python2 /usr/bin/tv_grab_nl_py --output ~/listings.xml"
Best regards,
Cedric

"Let us know why you need access to this item." SharePoint Search

I am using MySites, I uploaded a sample "Test.txt" to my own Document Library on my MySite page.
I go to "Search everything" box, type in "Test", hit Enter
It brings me to a page that says "Let us know why you need access to this item." with a page title of "Access required".
I noticed the URL it brings me to with this page is my SharePoint Search URL:
"search.mysharepointsite.net/_layouts/15/AccessDenied.aspx?Source=blah_blah_blah"
What is wrong?

Do you have a default search center configured in your environment?
My CodePlex -
My Blog - My Twitter
Here is a screenshot of my main Search Admin page:
Let me know if you need to see anything else. Thanks for replying!!

BEWARE of using stopwatch or timer in iphone 5 under iOS7. As the mili second digit ticks really fast, in a matter of minutes, it will break your LCD under that mili second area. It happened to my iphone5. Let me know if you have same issue.

Similar Messages

Maybe you are looking for