BEx Analyzer exit variable behaves differently from RSRT

Hello experts
I have an exit variable on a number of queries which is being filled out at I_STEP 1 with different values depending on which query is executed. This is a requirement for a number of reasons and cannot be changed. The user then has a different variable which is user input ready so he can select from one of the values I supply them. This variable is in the proposed values section of the query so it should only list the variables allowed for the user to select.
For example on query A, I want the exit variable to give the values 1,2 and 3. The user, on variable screen can select in the input-ready variable on of those values. In query B the same happens except the exit variable has values 3, 4 and 5.
If the user accesses one of these queries everything works fine. The problem happens when the user accesses query A, closes it and then accesses query B. In this situation he sees values 1,2,3,4 and 5 as available instead of only 3,4 and 5. It seems that the system shows him variables 1 and 2 despite the fact that he can't access them. This only happens in analyzer but not if I use RSRT. Is it a bug in Analyzer? I've tried debugging from RSRT the code to check if I forgot to clear something but I cannot find anything wrong but then again the problem does not happen in RSRT.
What can I try to do to solve this?
Thanks for your help.

I've done some further researching and discovered the following:
1 - My exit variable is working fine. It gets the correct values.
2 - The user-input variable is not being filtered correctly. It looks like it does not show only the values allowed in the exit variable.
Is this right? I thought if I had a set of values in the filter of the query, they would automatically restrict user input variables that the query may use in the proposed values.

Similar Messages

  • Default value of BeX customer Exit variable not Displayed in WeBI??

    Hello Experts,
    We are stuck with a problem where WeBI report is created on top of BeX query and we are not able to see the default value of Bex Customer exit variable in WeBI run. Here is the complete scenario:
    1. One restricted KF is created in BeX, restricted with Customer exit variable on net Due date. And this variable is mandatory, ready for input, and Default value in calculated is user exit as current Week's Monday.
    2. So, by default KF data should be restricted to Monday of current week, if user does not change this value.
    3. Now, WeBI report is created on top of this Bex query, and all is working fine, i.e. we are getting variable as Prompt in WeBI, but Default value is not shown while Running the Webi Report.
    So, need your inputs on the same, if default values from BeX in WeBI is supported or not? If yes, why this is happening, and how to resolve it?
    Please notice, the restrcition is in KF only, it is not a separate restrcition on Net Due date in Filter area or in Defualt area of BeX
    and we are on SAP BW 7.1 and BOXI 3.1 SP4.
    Regards,
    Vipul
    Edited by: VIPUL GOYAL on Nov 23, 2011 9:44 PM

    Hi,
    See 1285993 - Support of Customer Exit Variables from BEx query into WebIntelligence via OLAP universe
    WebI will prompt when executed, but the default values calculated by the user exit  - do not appear.
    Note: If the BEx variable has property 'ready for input' set / enabled, then its WebI prompt shows ok, but no default value appears.
    Cause
    This behaviour expected 'by design' (in the context of the product's current limitations) as explained in the online guide below:
    Please refer to Chapter 7, page 44, document link here: http://help.sap.com/businessobject/product_guides/boexir3/en/xi3_sap_olap_universes_en.pdf
    Characteristic variable > processing type > Customer Exit  is "Supported, without user entry"                                                                               
    -->  This should be understood as meaning "User will not be shown a prompt"
    regards,
    H

  • BEx SAP-Exit Variables

    Where do I find documentation on BEx SAP-Exit Variables. What the Exit does and so on?

    Try this link.
    http://help.sap.com/saphelp_nw70/helpdata/en/36/df22419e2ab167e10000000a155106/frameset.htm
    The variables are documented as per BI Content.
    -Saket

  • BEX User exit variables in WEBI

    Hi Experts,
    Need your help please.
    I have a report in BEX with a user exit variable wich depends on other manual input variable.
    In BEX it works properly but in WEBI it doesn't recognize the user exit variable.
    It displays the error message: Not possible to determine the value for ZPD_YEAR_DAY variable
    Error in DB.​ ​Error message is​:​ ​failure to execute the query ​M​D​X​ ​S​E​L​E​C​T​ ​ ​{​ ​[​M​e​a​s​u​r​e​s​]​.​[​D​9​C​S​1​W​7​F​A​8​F​E​O​H​J​3​T​3​2​H​4​Q​D​Z​4​]​,​ ​[​M​e​a​s​u​r​e​s​]​.​[​D​9​D​H​9​K​1​N​I​T​C​Z​E​4​U​Y​3​J​4​U​A​E​T​Z​4​]​,​ ​[​M​e​a​s​u​r​e​s​]​.​[​D​9​D​H​9​K​1​N​I​T​D​R​2​R​6​P​F​2​K​G​C​U​8​8​W​]​,​ ​[​M​e​a​s​u​r​e​s​]​.​[​D​9​C​S​1​W​7​F​A​8​E​M​Z​V​7​C​H​J​M​V​2​A​Z​P​C​]​,​ ​[​M​e​a​s​u​r​e​s​]​.​[​D​9​C​S​1​W​7​F​A​8​K​0​S​7​H​N​Q​B​O​5​J​A​R​L​S​]​,​ ​[​M​e​a​s​u​r​e​s​]​.​[​D​9​C​S​1​W​7​F​A​8​G​6​D​3​U​V​4​M​I​3​7​5​S​8​W​]​,​ ​[​M​e​a​s​u​r​e​s​]​.​[​D​9​C​S​1​W​7​F​A​8​H​P​Q​C​I​D​R​P​D​B​C​0​K​S​G​]​,​ ​[​M​e​a​s​u​r​e​s​]​.​[​D​9​C​S​1​W​7​F​A​8​I​H​E​Y​U​5​3​8​S​X​E​F​Z​2​8​]​,​ ​[​M​e​a​s​u​r​e​s​]​.​[​D​9​D​H​2​8​D​W​V​F​6​7​4​2​E​6​4​Z​O​L​8​F​X​3​4​]​ ​}​ ​ ​O​N​ ​C​O​L​U​M​N​S​ ​,​ ​N​O​N​ ​E​M​P​T​Y​ ​C​R​O​S​S​J​O​I​N​(​ ​C​R​O​S​S​J​O​I​N​(​ ​C​R​O​S​S​J​O​I​N​(​ ​C​R​O​S​S​J​O​I​N​(​ ​C​R​O​S​S​J​O​I​N​(​ ​C​R​O​S​S​J​O​I​N​(​ ​C​R​O​S​S​J​O​I​N​(​ ​C​R​O​S​S​J​O​I​N​(​ ​C​R​O​S​S​J​O​I​N​(​ ​ ​{​ ​[​0​C​A​L​Y​E​A​R​]​.​[​2​0​1​0​]​ ​}​ ​,​ ​ ​{​ ​[​0​H​A​P​_​D​O​C​_​I​D​_​_​Z​A​P​_​S​U​B​S​T​]​.​[​5​0​]​,​ ​[​0​H​A​P​_​D​O​C​_​I​D​_​_​Z​A​P​_​S​U​B​S​T​]​.​[​7​0​]​ ​}​ ​ ​)​,​ ​[​0​I​N​F​O​P​R​O​V​]​.​[​L​E​V​E​L​0​1​]​.​M​E​M​B​E​R​S​ ​)​,​ ​[​Z​D​A​T​E​_​A​T​]​.​[​L​E​V​E​L​0​1​]​.​M​E​M​B​E​R​S​ ​)​,​ ​ ​{​ ​[​Z​C​P​M​]​.​[​X​]​ ​}​ ​ ​)​,​ ​[​Z​P​R​O​M​O​C​A​O​]​.​[​L​E​V​E​L​0​1​]​.​M​E​M​B​E​R​S​ ​)​,​ ​[​Z​R​E​S​P​_​A​V​L​_​_​Z​N​I​V​_​C​A​R​R​]​.​[​L​E​V​E​L​0​1​]​.​M​E​M​B​E​R​S​ ​)​,​ ​[​Z​R​E​S​P​_​A​V​L​]​.​[​L​E​V​E​L​0​1​]​.​M​E​M​B​E​R​S​ ​)​,​ ​[​Z​N​I​V​_​C​A​R​R​]​.​[​L​E​V​E​L​0​1​]​.​M​E​M​B​E​R​S​ ​)​,​ ​[​0​E​M​P​L​O​Y​E​E​]​.​[​L​E​V​E​L​0​1​]​.​M​E​M​B​E​R​S​ ​)​ ​D​I​M​E​N​S​I​O​N​ ​P​R​O​P​E​R​T​I​E​S​ ​M​E​M​B​E​R​_​N​A​M​E​,​ ​M​E​M​B​E​R​_​C​A​P​T​I​O​N​,​ ​[​0​E​M​P​L​O​Y​E​E​]​.​[​2​0​E​M​P​L​O​Y​E​E​]​,​ ​[​0​E​M​P​L​O​Y​E​E​]​.​[​4​0​E​M​P​L​O​Y​E​E​]​,​ ​[​0​H​A​P​_​D​O​C​_​I​D​_​_​Z​A​P​_​S​U​B​S​T​]​.​[​2​0​H​A​P​_​D​O​C​_​I​D​_​_​Z​A​P​_​S​U​B​S​T​]​,​ ​[​Z​R​E​S​P​_​A​V​L​]​.​[​2​Z​R​E​S​P​_​A​V​L​]​ ​O​N​ ​R​O​W​S​ ​F​R​O​M​ ​[​Z​A​V​D​P​_​M​0​1​/​Z​P​D​_​G​P​S​_​V​A​R​I​A​V​E​L​_​0​0​2​]​ ​ ​with error:​ Not possible to determine the value for ZPD_YEAR_DAY variable​.​ ​(​W​I​S​ ​1​0​9​0​1​)
    This ZPD_YEAR_DAY variable​ is the user exit variable.
    Thanks in advance,
    José Simões

    Hi!
    I am following up to this post to see if there is something I am missing.
    We have bex query with user exit variable and webi bi4sp04.4
    In bex the user exit variable works correctly, in webi, it is ignored  (the webi results are not filtered as they are in bex web results)
    I have tried moving the variable to the char restrictions and removed ready for input - so there are now no prompts in bex query.
    I have reviewed note 1611185 as well as other info on restrictions of BICS and webi, but cannot find a clear answer if bex user exit variables are supported in BI4 clients or not.
    Lee Lewis

  • BEx Analyzer: Formula Variable with Replacement path change Month with Day

    Hi experts I'm facing this issue in BEx Analyzer.
    I need to have some dates in format DD/MM/YYYY in Index Structure, in order to do this I've created a formula variable with replacement path referenced to 0CALDAY characteristic.
    The formula works but it behaves in a strange way:
    if the day is higher than 12 the displaied result is correct (DD/MM/YYYY)
    if the day is lower or equal 12 the displaied result is wrong (MM/DD/YYYY)
    I'm on BW 7.01 SP6 and BEx Analyzer 7.10 SP12, excel 2007.
    anybody has faced this issue before?
    any help will be appreciated
    Daniele Cortopassi

    Hi Daniele,
    This seems pretty strange. Pls. redo validation with the dump data, as being a flat struture BEx does not apply any logic changes. May be it might have been MM/DD/YYYY format as in workbooks. Else you may change the property of 0calday display as "Text". Business Explorer > Display > KeyMaster Data/Texts > Texts (Plese check this option). If you are using some text table you may maintain the same using BI0/TCALDAY (Similar to BI0/TCALMONTH2). Guess it should be an excel based issue; if not you may try the same in WAD/Report designer to verify the nature of the issue. If you don't face these inconsistencies in WAD/RD then you may change excel formatting options. Lastly, please let us know if the infoobject has some predefined settings in RSA1 > Infoobject > (BEx) Properites.
    Thanks,
    Arun Bala

  • How to make BEX Customer Exit Variable inactive through Customer Exit Code

    Hi,
    I had created two variables VAR1 and VAR2 as Customer Exit variables
    If VAR1 is entered then it should automatically make the VAR2 as NO Entry Variable.
    vice versa also required.
    can u help me with any code in CMOD so that we can make it inactive through Customer Exit Code.
    Thanks in Advance.
    Sunil.

    What i want is not commenting the code
    I want to make the BEX Variable as inactive by using the Customer Exit Code
    EX : If value in VAR1 is entered  then VAR2 should become automatically inactive.
           If value in VAR2 is entered  then VAR1 should become automatically inactive.
    how can this be done
    Thanks in advance.
    Sunil

  • User Exit Variable picking values from InfoProvider

    Hi,
    I've created a User Exit variable (of type Interval, Mandatory) on 0CALMONTH and populating it in exit.
    The problem is at the time of query execution, I get "BRAIN 657" error i.e.  "Value <value> is Invalid for Variable <variable name>".
    After doing some analysis I figured out that once the user-exit code is performed, system validates the entries populated in this Variable against the values in InfoProvider and gives error when it doesn't find those values.
    E.g. lets say InfoProvider has values for 0CALMONTH from 06.2010 till 10.2010 and if I populate my variable with range 03.2009 till 12.2010 then it throws above error. But if I populate the variable with exact values i.e. 06.2010 till 10.2010 then it works.
    Any idea how can I remove this validation and populate with my own value range?
    Regards,
    Vikrant.

    hi remove that default value from the variable.
    and you shd be able to run the query without any problem.
    regards,
    VJ

  • Problem with Bex Customer Exit Variable

    Hi Friends,
    I have a customer exit variable which is getting filled based on the User Input.  I have written the code inside the If condition checking i_step = 2. The code is working as required.
    But the problem is when I try refreshing the query or change the user variable selection, the Customer exit variable is not changing.  I tried to debug the code and realized that the  values for the exit variable based on the previous selection is not cleared and the i_step = 2  is not being executed for the variable.
    While I close and reopen the query, the code is working fine.  
    Does anyone know why this is happening?  Please suggest..
    Thanks in advance..
    Regards,
    Priya

    Hi Binu,
    Here is the code sample.  I am trying to populate the month based on the input Week number '0I_WEKIN'
    .  For eg.  If I give 37.2011, the month value should be 08.2011.  If I give 39.2011, month should be 09.2011.
      WHEN 'ZC_MONTH'.
        IF i_step = 2.     "after the popup
            READ TABLE i_t_var_range INTO lw_var_range WITH KEY vnam =
        '0I_WEKIN'.
           IF lw_var_range-high IS NOT INITIAL.
              l_week  = lw_var_range-high.
              l_week = l_week - 3.
              CALL FUNCTION 'WEEK_GET_FIRST_DAY'
                EXPORTING
                  week = l_week
                IMPORTING
                  date = l_date.
              lw_range-low = l_date+0(6).
            ENDIF.
            lw_range-sign = 'I'.
            lw_range-opt  = 'BT'.
            APPEND lw_range TO e_t_range.
        ENDIF.
    Regards,
    Priya

  • ITunes window behaves different from others?

    I've always been wondering why the iTunes window behaves much differently than other windows. Taking Firefox for example, when I maximize it to the screen, I can't shift it left/right/up/down, so I can't accidentally move it. iTunes, however, doesn't have the same maximize options, changing from the 'big' mode to the 'mini' player. And when it's in the big mode, I constantly have to re-stretch and proportion it to my screen, and it frequently drops below the dock and outside the screen. Is there any way to get this changed or fixed? Thanks!

    Fixed

  • BEx Analyzer - Edit Variables via VBA

    Hi all,
    I need to set the BEx variable values via VBA to change a selection for an input ready query.
    Is there a way to do that?
    Thanks a lot.
    Best regards,
    Christian.

    I heard that are some functions in BW 3.5 with getBex and setBex.
    But it isn`t supported for BW 7.0.

  • 2.0 Tabs Behave Differently from 1.6 Tabs

    I exported and imported my primary application from our HTMLDB 1.6 server to our HTMLDB 2.0 server. Now the application looks ugly, because the text on my tabs drop down...
    to the second line when the width of the browser window is less than the width of the application
    My thoughts are that the HTMLDB 1.6 code used absolute dimensions to create the page, using a table having a width based on the number of pixels, say 800 for instance. Now, with HTMLDB 2.0 code, the page behaves like its a table with a width based on percentage, with relative dimensions, such as 100%.
    This may not make a difference with applications with a small number of tabs, or with a large number of small width tabs. But on mine... see below.
    I have some images that illustrate this:
    HMTMDB 1.6 nicely formatted page,
    http://www.utpa.edu/itis/images/htmldb%201.6.jpg
    HMTMDB 2.0 squashed tabs, not very appealing page,
    http://www.utpa.edu/itis/images/htmldb%202.0.jpg
    Does anyone else have this concern?
    Can the developer have a choice of absolute or relative page setup?
    Thanks for your time,
    RussDove

    Hello,
    Can the developer have a choice of absolute or relative page setup?You have full control of that using your page templates.
    You'll be able to fix that in your page template or css. Your running a very customized page template and I'm actually suprised that anything between 1.6 or 2.0 would have caused that to change but it looks like you found something.
    Try this add nowrap="nowrap" or style="white-space:nowrap" to the <td> cells of the tabs.
    Carl
    Message was edited by:
    Carl Backstrom

  • CMake behaves differently from within PKGBUILD and from command line

    Hi,
    I am currently struggling with an issue which I cannot find a solution. The problem is, I am trying to create a PKGBUILD for the CasADi code. The following is the PKGBUILD file written. My problem is the cmake configuration part. When the code is configured from the command line, without PKGBUILD, camke detects the -fopenmp flag for C and C++ compilers. For exactly the same compilers, cmake detects openmp for C compiler but fails to do so for the C++ compiler, when configuration is done from within the PKGBUILD file using makepkg.
    My question is, why different behaviors? Any suggestions on what is wrong?
    pkgname=casadi-git
    pkgver=0
    pkgrel=1
    pkgdesc="A symbolic framework for automatic differentiation and numeric optimization"
    arch=('i686' 'x86_64')
    url=""
    license=('GPL')
    groups=()
    depends=('sundials' 'ipopt' 'blas' 'lapack' 'python2')
    makedepends=('cmake' 'swig')
    checkdepends=()
    optdepends=()
    provides=('casadi')
    conflicts=()
    replaces=()
    backup=()
    options=()
    install=
    changelog=
    source=('casadi::git+https://github.com/casadi/casadi.git')
    md5sums='SKIP'
    build() {
    cd "$srcdir/casadi"
    sed -i 's/PythonLibs/PythonLibs 2.7/g' ./cmake_modules/FindNUMPY.cmake ./swig/CMakeLists.txt
    cmake . -DCMAKE_INSTALL_PREFIX=/usr \
    -DPYTHON_EXECUTABLE=/usr/bin/python2 \
    -DWITH_DL:BOOL=ON \
    -DWITH_LLVM:BOOL=OFF \
    -DWITH_PYTHON_INTERRUPTS:BOOL=ON \
    -DWITH_OPENMP:BOOL=ON \
    -DWITH_OOQP:BOOL=ON \
    -DWITH_DOC:BOOL=ON \
    -DWITH_OPENCL:BOOL=OFF
    make
    package() {
    cd "$srcdir/casadi"
    make DESTDIR="$pkgdir/" install
    Output when cmake is run from command line
    -- The C compiler identification is GNU 4.8.1
    -- The CXX compiler identification is GNU 4.8.1
    -- Check for working C compiler: /usr/bin/colorgcc
    -- Check for working C compiler: /usr/bin/colorgcc -- works
    -- Detecting C compiler ABI info
    -- Detecting C compiler ABI info - done
    -- Check for working CXX compiler: /usr/bin/c++
    -- Check for working CXX compiler: /usr/bin/c++ -- works
    -- Detecting CXX compiler ABI info
    -- Detecting CXX compiler ABI info - done
    -- The Fortran compiler identification is GNU
    -- Check for working Fortran compiler: /usr/bin/gfortran
    -- Check for working Fortran compiler: /usr/bin/gfortran -- works
    -- Detecting Fortran compiler ABI info
    -- Detecting Fortran compiler ABI info - done
    -- Checking whether /usr/bin/gfortran supports Fortran 90
    -- Checking whether /usr/bin/gfortran supports Fortran 90 -- yes
    -- Flag needed for enabling C++11 features: -std=gnu++11
    -- x86_64 architecture detected - setting flag -fPIC
    -- Try OpenMP C flag = [-fopenmp]
    -- Performing Test OpenMP_FLAG_DETECTED
    -- Performing Test OpenMP_FLAG_DETECTED - Success
    -- Try OpenMP CXX flag = [-fopenmp]
    -- Performing Test OpenMP_FLAG_DETECTED
    -- Performing Test OpenMP_FLAG_DETECTED - Success
    -- Found OpenMP: -fopenmp
    -- Looking for Fortran sgemm
    -- Looking for Fortran sgemm - found
    -- Looking for include file pthread.h
    -- Looking for include file pthread.h - found
    -- Looking for pthread_create
    -- Looking for pthread_create - found
    -- Found Threads: TRUE
    -- Found LibXml2: /usr/lib64/libxml2.so (found version "2.9.1")
    -- A library with BLAS API found.
    -- Looking for Fortran cheev
    -- Looking for Fortran cheev - found
    -- A library with LAPACK API found.
    -- Found PkgConfig: /usr/bin/pkg-config (found version "0.28")
    -- checking for one of the modules 'ipopt'
    -- Detected an IPOPT configuration without development headers. Build will proceed, but without callback functionality. To enable it, see https://github.com/casadi/casadi/wiki/enableIpoptCallback
    -- Detected an IPOPT configuration without sIPOPT headers. Build will proceed, but without sIPOPT functionality.
    -- Found IPOPT: ipopt;lapack;blas;m;dl;coinmumps;pthread;blas;gfortran;m;gcc_s;quadmath;coinmetis
    -- Could not find KNITRO include dir
    -- Could not find KNITRO library
    -- Could not find CPLEX include dir
    -- Could not find CPLEX libraries
    -- Could not find MA57
    -- MA57 libraries not found. Falling back to MA27
    -- Could not find MA27
    -- Could not find OOQP include dir
    -- Could not find SNOPT include dir
    -- Found Snopt libs: /usr/lib64/libf2c.a;/usr/lib64/liblapack.so;/usr/lib64/libblas.so;dl
    -- Could not find MATLAB include dir
    -- Could not find Matlab libs
    -- Could not find SNOPT include dir
    -- Found Snopt libs: /usr/lib64/libf2c.a;/usr/lib64/liblapack.so;/usr/lib64/libblas.so;dl
    -- Could not find MATLAB include dir
    -- Could not find Matlab libs
    -- Found SWIG: /usr/bin/swig (found version "2.0.10")
    -- Found PythonLibs: /usr/lib64/libpython2.7.so (found suitable version "2.7.5", minimum required is "2.7")
    -- Python executable is /home/hamid/bin/python
    -- numpy.get_include() is /usr/lib/python2.7/site-packages/numpy/core/include
    -- Numpy path found: /usr/include/python2.7/numpy
    -- Python libs: /usr/lib64/libpython2.7.so
    -- Numpy includes: /usr/include/python2.7/numpy;/usr/include
    -- Numpy libs: /usr/lib64/python2.7/site-packages/numpy/core/multiarray.so
    -- Found PythonInterp: /home/hamid/bin/python (found version "2.7.5")
    -- Found Doxygen: /usr/bin/doxygen (found version "1.8.4")
    -- Found DOXYFILE_IN: /usr/src/AUR/build/casadi/src/casadi/documentation/api-doc/Doxyfile.in
    -- pyreport not found -- try 'easy_install pyreport'
    -- The following features have been enabled:
    * dynamic-loading , Compile with support for dynamic loading of generated functions (needed for ExternalFunction)
    * using-c++11 , Using C++11 features (improves efficiency and is required for some examples).
    * sundials-interface , Interface to the ODE/DAE integrator suite SUNDIALS.
    * csparse-interface , Interface to the sparse direct linear solver CSparse.
    * lapack-interface , Interface to LAPACK.
    * ipopt-interface , Interface to the NLP solver Ipopt.
    * qpoases-interface , Interface to the active-set QP solver qpOASES.
    * dsdp-interface , Interface to the interior point SDP solver DSDP (requires BLAS and LAPACK).
    -- The following OPTIONAL packages have been found:
    * OpenMP
    * LibXml2
    * BLAS
    * Threads
    * LAPACK
    * PkgConfig
    * IPOPT
    * SWIG
    * NUMPY
    * PythonInterp
    * Doxygen
    -- The following features have been disabled:
    * just-in-time , Just-in-time compiliation via the LLVM compiler framework.
    * opencl-support , Enable just-in-time compiliation to CPUs and GPUs with OpenCL.
    * get-ipopt , Download and build Ipopt.
    * knitro-interface , Interface to the NLP solver KNITRO.
    * cplex-interface , Interface to the QP solver CPLEX.
    * ooqp-interface , Interface to the QP solver OOQP (requires BLAS).
    * worhp-inteface , Interface to the NLP solver Worhp (requires LibXml2 headers).
    -- The following OPTIONAL packages have not been found:
    * KNITRO
    * CPLEX
    * MA57
    * MA27
    * OOQP
    * MATLAB
    * OCTAVE
    * LATEX
    * PYREPORT
    -- Configuring done
    -- Generating done
    Output when running makepkg
    -- The C compiler identification is GNU 4.8.1
    -- The CXX compiler identification is GNU 4.8.1
    -- Check for working C compiler: /usr/bin/colorgcc
    -- Check for working C compiler: /usr/bin/colorgcc -- works
    -- Detecting C compiler ABI info
    -- Detecting C compiler ABI info - done
    -- Check for working CXX compiler: /usr/bin/c++
    -- Check for working CXX compiler: /usr/bin/c++ -- works
    -- Detecting CXX compiler ABI info
    -- Detecting CXX compiler ABI info - done
    -- The Fortran compiler identification is GNU
    -- Check for working Fortran compiler: /usr/bin/gfortran
    -- Check for working Fortran compiler: /usr/bin/gfortran -- works
    -- Detecting Fortran compiler ABI info
    -- Detecting Fortran compiler ABI info - done
    -- Checking whether /usr/bin/gfortran supports Fortran 90
    -- Checking whether /usr/bin/gfortran supports Fortran 90 -- yes
    -- Flag needed for enabling C++11 features: -std=gnu++11
    -- x86_64 architecture detected - setting flag -fPIC
    -- Try OpenMP C flag = [-fopenmp]
    -- Performing Test OpenMP_FLAG_DETECTED
    -- Performing Test OpenMP_FLAG_DETECTED - Success
    -- Try OpenMP CXX flag = [-fopenmp]
    -- Performing Test OpenMP_FLAG_DETECTED
    -- Performing Test OpenMP_FLAG_DETECTED - Failed
    -- Try OpenMP CXX flag = [/openmp]
    -- Performing Test OpenMP_FLAG_DETECTED
    -- Performing Test OpenMP_FLAG_DETECTED - Failed
    -- Try OpenMP CXX flag = [-Qopenmp]
    -- Performing Test OpenMP_FLAG_DETECTED
    -- Performing Test OpenMP_FLAG_DETECTED - Failed
    -- Try OpenMP CXX flag = [-openmp]
    -- Performing Test OpenMP_FLAG_DETECTED
    -- Performing Test OpenMP_FLAG_DETECTED - Failed
    -- Try OpenMP CXX flag = [ ]
    -- Performing Test OpenMP_FLAG_DETECTED
    -- Performing Test OpenMP_FLAG_DETECTED - Failed
    -- Try OpenMP CXX flag = [-xopenmp]
    -- Performing Test OpenMP_FLAG_DETECTED
    -- Performing Test OpenMP_FLAG_DETECTED - Failed
    -- Try OpenMP CXX flag = [+Oopenmp]
    -- Performing Test OpenMP_FLAG_DETECTED
    -- Performing Test OpenMP_FLAG_DETECTED - Failed
    -- Try OpenMP CXX flag = [-qsmp]
    -- Performing Test OpenMP_FLAG_DETECTED
    -- Performing Test OpenMP_FLAG_DETECTED - Failed
    -- Try OpenMP CXX flag = [-mp]
    -- Performing Test OpenMP_FLAG_DETECTED
    -- Performing Test OpenMP_FLAG_DETECTED - Failed
    -- Could NOT find OpenMP (missing: OpenMP_CXX_FLAGS)
    -- Looking for Fortran sgemm
    -- Looking for Fortran sgemm - found
    -- Looking for include file pthread.h
    -- Looking for include file pthread.h - found
    -- Looking for pthread_create
    -- Looking for pthread_create - not found
    -- Looking for pthread_create in pthreads
    -- Looking for pthread_create in pthreads - not found
    -- Looking for pthread_create in pthread
    -- Looking for pthread_create in pthread - found
    -- Found Threads: TRUE
    -- Found LibXml2: /usr/lib64/libxml2.so (found version "2.9.1")
    -- A library with BLAS API found.
    -- Looking for Fortran cheev
    -- Looking for Fortran cheev - found
    -- A library with LAPACK API found.
    -- Found PkgConfig: /usr/bin/pkg-config (found version "0.28")
    -- checking for one of the modules 'ipopt'
    -- Detected an IPOPT configuration without development headers. Build will proceed, but without callback functionality. To enable it, see https://github.com/casadi/casadi/wiki/enableIpoptCallback
    -- Detected an IPOPT configuration without sIPOPT headers. Build will proceed, but without sIPOPT functionality.
    -- Found IPOPT: ipopt;lapack;blas;m;dl;coinmumps;pthread;blas;gfortran;m;gcc_s;quadmath;coinmetis
    -- Could not find KNITRO include dir
    -- Could not find KNITRO library
    -- Could not find CPLEX include dir
    -- Could not find CPLEX libraries
    -- Could not find MA57
    -- MA57 libraries not found. Falling back to MA27
    -- Could not find MA27
    -- Could not find OOQP include dir
    -- Could not find SNOPT include dir
    -- Found Snopt libs: /usr/lib64/libf2c.a;-lpthread;/usr/lib64/liblapack.so;/usr/lib64/libblas.so;dl
    -- Could not find MATLAB include dir
    -- Could not find Matlab libs
    -- Could not find SNOPT include dir
    -- Found Snopt libs: /usr/lib64/libf2c.a;-lpthread;/usr/lib64/liblapack.so;/usr/lib64/libblas.so;dl
    -- Could not find MATLAB include dir
    -- Could not find Matlab libs
    -- Found SWIG: /usr/bin/swig (found version "2.0.10")
    -- Found PythonLibs: /usr/lib64/libpython2.7.so (found suitable version "2.7.5", minimum required is "2.7")
    -- Python executable is /usr/bin/python2
    -- numpy.get_include() is /usr/lib/python2.7/site-packages/numpy/core/include
    -- Numpy path found: /usr/include/python2.7/numpy
    -- Python libs: /usr/lib64/libpython2.7.so
    -- Numpy includes: /usr/include/python2.7/numpy;/usr/include
    -- Numpy libs: /usr/lib64/python2.7/site-packages/numpy/core/multiarray.so
    -- Found PythonInterp: /usr/bin/python2 (found version "2.7.5")
    -- Found Doxygen: /usr/bin/doxygen (found version "1.8.4")
    -- Found DOXYFILE_IN: /usr/src/AUR/build/casadi/src/casadi/documentation/api-doc/Doxyfile.in
    -- pyreport not found -- try 'easy_install pyreport'
    -- The following features have been enabled:
    * dynamic-loading , Compile with support for dynamic loading of generated functions (needed for ExternalFunction)
    * using-c++11 , Using C++11 features (improves efficiency and is required for some examples).
    * sundials-interface , Interface to the ODE/DAE integrator suite SUNDIALS.
    * csparse-interface , Interface to the sparse direct linear solver CSparse.
    * lapack-interface , Interface to LAPACK.
    * ipopt-interface , Interface to the NLP solver Ipopt.
    * qpoases-interface , Interface to the active-set QP solver qpOASES.
    * dsdp-interface , Interface to the interior point SDP solver DSDP (requires BLAS and LAPACK).
    -- The following OPTIONAL packages have been found:
    * LibXml2
    * BLAS
    * Threads
    * LAPACK
    * PkgConfig
    * IPOPT
    * SWIG
    * NUMPY
    * PythonInterp
    * Doxygen
    -- The following features have been disabled:
    * just-in-time , Just-in-time compiliation via the LLVM compiler framework.
    * opencl-support , Enable just-in-time compiliation to CPUs and GPUs with OpenCL.
    * get-ipopt , Download and build Ipopt.
    * knitro-interface , Interface to the NLP solver KNITRO.
    * cplex-interface , Interface to the QP solver CPLEX.
    * ooqp-interface , Interface to the QP solver OOQP (requires BLAS).
    * worhp-inteface , Interface to the NLP solver Worhp (requires LibXml2 headers).
    -- The following OPTIONAL packages have not been found:
    * OpenMP
    * KNITRO
    * CPLEX
    * MA57
    * MA27
    * OOQP
    * MATLAB
    * OCTAVE
    * LATEX
    * PYREPORT
    -- Configuring done
    -- Generating done

    With a little creativity, you can actually do all that from the command line with a single command. It'll look a little crazy, but it can be done.
    Whether the script exists on the local machine or not has zero to do with platform indpendence. You assumedly have to get the application onto the local machine, so including the script is not really an issue at all. However, you're talking about system independence, yet still wishing to run command line arguments? The two are mutually exclusive.

  • ACR 4.5 behaves different from 4.4.1 with Olympus ORF files

    In the last weeks I shot raw files (ORF; Olympus UZ570)and first used ACR 4.4.1. Auto Tone option. Later on I used ACR 4.5 on the same files and noted that especially the brightness was substantially different after using Auto Tone; other values were hardly affected. Typical example a brightness value of 53 with ACR 4.4.1 changed to 6 in ACR 4.5
    This behaviour results in regularly under-exposed pictures.
    Any thoughts/ideas/causes?
    Thanks,
    Nick

    I've always been curious about this. Is auto-tone a one-time thing or will an engine with different
    algorithms apply different auto-toning retroactively? Seems like the former is preferred but I've
    never known for sure.

  • Why does DIO6534 behaves differently from its lesser relatives?

    I am developing under LabWindows/CVI some code for the DIO 653X family. It's almost two years since I started working with'em, so it's disappointing the problem I'm talking about.
    This is the guilty code:
    DIG_Grp_Config(DIO_BOARD, 2, 2, 2, 0);
    DIG_Block_PG_Config(DIO_BOARD, 2, 1, 0, rtimebase, rreqint, 0);
    DIG_Block_In(DIO_BOARD, 2, in_conf_buff, 1281);
    do {
    status = DIG_Block_Check(DIO_BOARD, 2, &rem);
    } while (rem);
    It is used to read in pattern generation 1281 samples, 16 bits each, on group 2
    The code runs OK on DIO 32-HS and on DAQCard 6533, but it faults on DIO 6534.
    Provided that rtimebase e rreqint are correctly defined and that in_conf_buff is wi
    de enough to contain all the acquisition, the problem is: come to the do-while loop that worries about controlling that the acquisition is running OK by the DIG_Block_Check instruction, the program remains in the loop, with a single sample to be read (rem = 1), only with DIO 6534.
    I made some trials to get out of the mess, so that I found that the error happens when I use an odd number of samples, not when I use an even number. But the REQ pulses number are needed to drive a read-out chip, so I can't simply reduce or increase by 1 the samples number, as this would leave the chip in an umpredictable state.
    Who can help me?

    Hi medihelp,
    Because the 6534 always performs DMA transfers in 32-bit even for 16-bit input groups, there will be "stranded" data if the number of data transferred is not a multiple of 4 bytes. This different behavior (compared to the 6533) is due to the addition of onboard memory to support high speed transfers. At the end of the DMA transfers, the stranded data will be retrieved manually, and status should be updated to indicate that the tranfer is truly finished. There is a bug in the NIDAQ driver that fails to update the status flag, causing the return value of DIG_Block_Check to get stuck at 1, even though all data has been acquired. The fix for this problem will be made available to all users very soon. In the meantime, I would recommend that you either make the
    sample count a multiple of 4 bytes, or change the condition of the while loop to break when DIG_Block_Check returns 1 instead of 0.

  • Magic Mouse behaving differently from illustrator to PS

    I have an apple magic mouse, in illustrator dragging my finger around on the mouses surface moves the image I'm zoomed in on all around rather fast, i like it,.. but in photoshop doing the exact same thing moves the image slowly and its kinda chunky as it moves. Exact same jpg image I've tested this with, anyone know why? Or better yet how to fix it?

    Never heard of that from new batteries.   Here are some notes I've written about batteries.
    Whether you use regular or rechargeable batteries you should buy the best. Discounted or unbranded batteries are more likely to give a depleted performance and may be of irregular size, often leading to connection problems. Apple’s own brand, Eneloop and Energiser appear to be the best.
    Rechargeable batteries for the standard Magic mouse are unlikely to exceed eighteen days before needing a recharge although the mouse itself can be a limiting factor.   I have seen reports that some Logitech mice vastly exceed this.   Apple may suggest more in their sales blurb but this is a realistic expectation.   The benefit (if you are organised) is that you can always have charged batteries available.   Regular batteries will give you between 25 and 35 days before they need to be replaced.
    Note.  Never mix old and new batteries or rechargeable and regular.  
    Both the above are based on my personal experience, not shutting down my machine and using it for around four hours per day.   Note.   Monitors do not always faithfully report battery strength, particularly with rechargeable ones.
    When checking your mouse or keyboard batteries ...
    Turn off the device.
    Remove the batteries,
    Clean the terminals both inside the battery compartment and on the batteries themselves.
    Replace or renew both batteries.
    Turn on the device.   You should get a blinking green light if the device is paired.
    Click the mouse to activate it.  The green light becomes steady.

Maybe you are looking for

  • Open applications not appearing in dock or command-tab.

    I am using 10.9.5 on a Macbook Air and I've noticed recently that open applications don't display icons in the dock.  Command-Tab also doesn't show the icons of all open applications either.  This seems to be recently occurring.  It's quite frustrati

  • Button Pointing to audio file in same directory

    I'm fairly new to Flash, but have gotten the hang of it for the most part. I'm trying to create audio buttons that will play vocabulary words when clicked on for a language learning website. I can create buttons that play audio when clicked, but as o

  • Lost my osx discs, used my sister's discs, why doesn't it work??

    My harddrive on my MacBook crashed recently, and I have now replaced it with a new one. But, I need to install os x, but my discs that came with my computer are gone (I had version 10.4). I borrowed my sister's discs (she have version 10.5.6), but it

  • How to display alpha channel of layer mask in layers palette ??

    Help me out here folks.... Using CS5--in the past, when I added a layer mask to a layer, it would display in the palette as the alpha channel, which was very handy. Now, when I add a layer mask, it only appears as the mask icon; i.e., gray square wit

  • Error in inserting data

    Hi, I have insert page i the developing instance it is working fine . But in production after click on submit we have a dialog page saying that do u want to save the data . If the user clicks ok the data is saving in backend but its showing the error