Bex Query using BICS running fine in Rich client but v. slow in Launchpad
Hi guys,
At my client client we are using BICS to use Bex Query in Web Intellience, and i created a report that takes less than 10 seconds once run in Rich client but when i create the same Webi report in Launch pad: the list of values take forever to refesh and the report runs for about 30 mins before it displays data..
In both cases it shows data but the time difference is huge.
Kindly direct me on what could be the possible issues considering this case.
Regards,
Sheikh
Hi Sheikh,
There are some known issues with the BICS connectivity and LOV's when retreiving data in BI4.0
This is detailed in the note - 1581323 - BI 4.0 Web Intelligence very slow performance when using BICS
Basically there are some registry changes which need to be made to result in quicker data retreival. The full fix is scheduled for Patch 2.1. It may not be your precise issue but the registry change should help I believe.
Can you test with the registry fix and let me know if this improves matters for you:
Resolution
The following fix is planned for Patch2.1 (w/c 27th June 2011):
Add 2 new registry entries (string keys) under
For the 32-bit using Rich Client: [HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\SAP BusinessObjects\Suite XI 4.0\default\WebIntelligence\Calculator]:
For the 64-bit Web Intelligence:[HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Suite XI 4.0\default\WebIntelligence\Calculator]
"BICSLOVChunkSize"="4000"
"BICSResultChunkSize"="100000"
Note 1: In a specific test case, a value of 4000 yielded good results, reducing fetch time from 20 minutes to under 5 minutes.
Note 2: Registry key usage:
BICSLOVChunkSize is defined as a string. It help create a chunk of List of Value of maximum the number given. The bigger the number the more likely the retrieval of the list of value will crash. Consider using a value between 100 and 5000. If you have 1000 values in your database and you set the BICSLOVChunkSize to 200. Then you will see a hierarchical view of 5 groups having eah 200 list of value.
BICSResultChunkSize is defined as a string. It limits the number of results that can be retrieved as a List of Value. If you have a List of Value which contains 1 Millions values and set the BICSResultChunkSize to 1000 than only the first 1000 rows will be retrieved. Therefore you will get a partial result set for the list of value.
Parallel correction for interoperability:
A parallel fix has been delivered via component BW-BEX-OT-BICS by way of a correction attached to Note 1593802.
Workaround:
Set all the values of column u201COrder for F4 Helpu201D to 0 (zero) in BW Transaction RSD1 so that the attributes are not retrieved.
-> List of members are now displayed in 20 seconds.
I hope this is a very helpful answer to you.
Kind regards,
John
Similar Messages
-
Crystal Reports with BEx Query using Custom Exit Variable
Hi,
We have BW BEx Query using Customer User Exit variable to derive the Fiscal Week for Last Year (called it VAR2) based on another user input variable Current Fiscal Week (called it VAR1).
VAR2 is derived from VAR1 in CMOD via some codings and thus it DOES NOT have the "Variable is Ready for Input" flag ticked in the BEx. VAR1 is user input variable, so it has "Variable is Ready for Input" flag ticked in the BEx.
When we create a Crystal Reports with the BEx Query using variable VAR2, and when we run it we got an error message saying "Failed to execute query; '[]<java.lang.UnsupportedOperationException: No Selection State Support!ZP_MI_LYPUBWEEK>'. Redesign your query or contact the data source maintainer to solve the problem". (note: ZP_MI_LYPUBWEEK is VAR2 in this case).
Could anyone please assist? Surely, CR supports BEx customer user exit variables like the above, right?. I also refer to the forum below as it seems to have a similar issue (except mine with an error message), but it does not provide a solution in it.
Crystal Reports with BEx Query using Custom Exit Variable
Thanks,
AndyHi Vibhav,
We have the SAP Crystal Reports for Enterprise XI4.0 Version 14.0.0. Not sure if SP0 or other SP, got to check with Basis Team later.
We tried that "mandatory" option and did not work either.
Anyway, SAP has now come back again saying it is something they will fix it in next release/version. We got a phone call from them and a reply below to our OSS.
23.08.2011 - 08:20:49 CET - Info for Customer by SAP
I have raised this issue on the Idea#s Place as an enhancement request
on the below link:
https://cw.sdn.sap.com/cw/ideas/5586
This ER contains the information of including the customer exit
variables in the report without checking the #input for ready# option.
This ER can be considered for being implemented in the future
versions. You can refer to SAP Note: 1515837 - How To: Enhancement
Request Process - "Idea Place" for more information regarding the Idea
Place.
Cheers,
Andy -
Bex Query is continuously running
Hi all,
one of our Bex Query is continuously running so long, but when i rename and run the same query it is working fine.
i cleared all the cash, but still problem is existing.
please help me to short this out
Thanks
MiranaHi Mirana,
After long run you are getting out putcorrect?
Run same your query in RSRT with debugmode and on statistical data.
After execution you will see the satistical data then you will come to where exactly your query is taking time.
Hope it will help.
Regards,
Ganesh Bothe -
Same exact update runs fine in one db but causes ORA-00904 in another
I have an update statement that runs fine in one db but causes "" error in another. The two databases table structures are the same. I checked for synonyms and reserved words on BASE and COMPANY_ID but did not come up with anything. The db where it is working is 10.2. The db where it is not working is 10.1.
Here is the statement:
1 UPDATE t_company base
2 SET (company_name, company_name_sid, company_name_lco, canonical_name,
3 short_name, short_name2) =
4 (SELECT company_name, source_id, company_name_lco, canonical_name,
5 short_name, short_name2
6 FROM t_auth_company comp
7 WHERE comp.company_id = base.company_id
8 AND source_id =
9 (SELECT source_id
10 FROM (SELECT auth.source_id, trumping_order
11 FROM t_auth_company auth,
12 t_trumping_rule rl
13 WHERE auth.company_id = base.company_id
14 AND auth.company_name IS NOT NULL
15 AND rl.source_id = auth.source_id
16 AND rl.attribute_id = 'abc'
17 ORDER BY rl.trumping_order)
18 WHERE ROWNUM = 1))
19 WHERE
20 (-- The company has been updated
21 company_id IN (
22 SELECT company_id
23 FROM t_auth_company auth
24 WHERE auth.company_name_lco >= sysdate
25 OR auth.company_id_lco >= sysdate)
26 OR
27 ( -- The trumping rule for the attribute has been changed
28 SELECT MAX(last_changed_on)
29 FROM t_trumping_rule rl
30 WHERE rl.attribute_id = 'abc' ) >= sysdate
31 )
32 -- The company has been merged
33 AND 1 < (SELECT COUNT (*)
34 FROM t_auth_company auth
35* WHERE auth.company_id = base.company_id)
SQL> /
WHERE auth.company_id = base.company_id
ERROR at line 13:
ORA-00904: "BASE"."COMPANY_ID": invalid identifier
Thank You
BorisThank you for responding. It is syntactically working in the 10.2 database. Please, see this:
SQL> UPDATE t_company base
2 SET (company_name, company_name_sid, company_name_lco, canonical_name,
3 short_name, short_name2) =
4 (SELECT company_name, source_id, company_name_lco, canonical_name,
5 short_name, short_name2
6 FROM t_auth_company comp
7 WHERE comp.company_id = base.company_id
8 AND source_id =
9 (SELECT source_id
10 FROM (SELECT auth.source_id, trumping_order
11 FROM t_auth_company auth,
12 t_trumping_rule rl
13 WHERE auth.company_id = base.company_id
14 AND auth.company_name IS NOT NULL
15 AND rl.source_id = auth.source_id
16 AND rl.attribute_id = 'abc'
17 ORDER BY rl.trumping_order)
18 WHERE ROWNUM = 1))
19 WHERE
20 (-- The company has been updated
21 company_id IN (
22 SELECT company_id
23 FROM t_auth_company auth
24 WHERE auth.company_name_lco >= sysdate
25 OR auth.company_id_lco >= sysdate)
26 OR
27 ( -- The trumping rule for the attribute has been changed
28 SELECT MAX(last_changed_on)
29 FROM t_trumping_rule rl
30 WHERE rl.attribute_id = 'abc' ) >= sysdate
31 )
32 -- The company has been merged
33 AND 1 < (SELECT COUNT (*)
34 FROM t_auth_company auth
35 WHERE auth.company_id = base.company_id)
36 /
0 rows updated.
SQL>
The table structures are as follows:
CREATE TABLE RTCR_UCDB.T_AUTH_COMPANY
AUTH_COMPANY_ID NUMBER(22),
SOURCE_ID NUMBER(3) NOT NULL,
LD_COMPANY_ID NUMBER(22),
SOURCE_COMPANY_ID VARCHAR2(150 BYTE),
MATCH_DECISION NUMBER(1) DEFAULT 0 NOT NULL,
MATCH_DECISION_LCO DATE DEFAULT sysdate,
COMPANY_ID NUMBER(22),
COMPANY_ID_LCO DATE,
COMPANY_NAME VARCHAR2(150 BYTE),
COMPANY_NAME_LCO DATE DEFAULT sysdate,
CANONICAL_NAME VARCHAR2(150 BYTE),
SHORT_NAME VARCHAR2(150 BYTE),
SHORT_NAME2 VARCHAR2(150 BYTE),
URL VARCHAR2(150 BYTE),
URL_LCO DATE DEFAULT sysdate,
NURL VARCHAR2(150 BYTE),
PRIMARY_SIC VARCHAR2(150 BYTE),
PRIMARY_SIC_LCO DATE DEFAULT sysdate,
PRIMARY_TICKER VARCHAR2(15 BYTE),
PRIMARY_TICKER_LCO DATE DEFAULT sysdate,
EXCHANGE_ID VARCHAR2(60 BYTE),
EXCHANGE_ID_LCO DATE DEFAULT sysdate,
NEXCHANGE_ID VARCHAR2(60 BYTE),
ADDRESS VARCHAR2(150 BYTE),
ADDRESS_LCO DATE DEFAULT sysdate,
NADDRESS VARCHAR2(150 BYTE),
NADDRESS_CONTAINS VARCHAR2(150 BYTE),
CITY VARCHAR2(150 BYTE),
CITY_LCO DATE DEFAULT sysdate,
NCITY VARCHAR2(150 BYTE),
STATE VARCHAR2(150 BYTE),
STATE_LCO DATE DEFAULT sysdate,
NSTATE VARCHAR2(150 BYTE),
POSTAL_CODE VARCHAR2(15 BYTE),
POSTAL_CODE_LCO DATE DEFAULT sysdate,
NPOSTAL_CODE VARCHAR2(15 BYTE),
COUNTRY_ID VARCHAR2(10 BYTE),
COUNTRY_ID_LCO DATE DEFAULT sysdate,
NCOUNTRY_ID VARCHAR2(10 BYTE),
TELEPHONE VARCHAR2(60 BYTE),
TELEPHONE_LCO DATE DEFAULT sysdate,
NPHONE VARCHAR2(60 BYTE),
PHONE_7D VARCHAR2(60 BYTE),
PHONE_AREA VARCHAR2(60 BYTE),
FAX VARCHAR2(60 BYTE),
FAX_LCO DATE DEFAULT sysdate,
NFAX VARCHAR2(60 BYTE),
GW_COMPANY_ID VARCHAR2(150 BYTE),
GW_COMPANY_ID_LCO DATE DEFAULT sysdate,
CIK_NUMBER VARCHAR2(150 BYTE),
CIK_NUMBER_LCO DATE DEFAULT sysdate,
IRS_EIN VARCHAR2(150 BYTE),
IRS_EIN_LCO DATE DEFAULT sysdate,
MIN_DATA_FLAG VARCHAR2(1 BYTE) DEFAULT 'N' NOT NULL,
OBSOLETE_FLAG VARCHAR2(1 BYTE) DEFAULT 'N' NOT NULL,
OBSOLETE_FLAG_LCO DATE,
LAST_CHANGED_BY VARCHAR2(50 BYTE) DEFAULT user NOT NULL,
LAST_CHANGED_ON DATE DEFAULT sysdate NOT NULL,
CREATED_ON DATE NOT NULL
CREATE TABLE RTCR_UCDB.T_TRUMPING_RULE
SOURCE_ID NUMBER(3) NOT NULL,
ATTRIBUTE_ID NUMBER(5) NOT NULL,
TRUMPING_ORDER NUMBER(3),
LAST_CHANGED_BY VARCHAR2(50 BYTE) DEFAULT USER,
LAST_CHANGED_ON DATE DEFAULT sysdate
CREATE TABLE RTCR_UCDB.T_COMPANY
COMPANY_ID NUMBER(22),
COMPANY_NAME VARCHAR2(150 BYTE),
COMPANY_NAME_SID NUMBER(3),
COMPANY_NAME_LCO DATE,
CANONICAL_NAME VARCHAR2(150 BYTE),
SHORT_NAME VARCHAR2(150 BYTE),
SHORT_NAME2 VARCHAR2(150 BYTE),
URL VARCHAR2(150 BYTE),
URL_SID NUMBER(3),
URL_LCO DATE,
NURL VARCHAR2(150 BYTE),
PRIMARY_SIC VARCHAR2(150 BYTE),
PRIMARY_SIC_SID NUMBER(3),
PRIMARY_SIC_LCO DATE,
PRIMARY_TICKER VARCHAR2(15 BYTE),
PRIMARY_TICKER_SID NUMBER(3),
PRIMARY_TICKER_LCO DATE,
EXCHANGE_ID VARCHAR2(60 BYTE),
EXCHANGE_ID_SID NUMBER(3),
EXCHANGE_ID_LCO DATE,
NEXCHANGE_ID VARCHAR2(60 BYTE),
ADDRESS VARCHAR2(150 BYTE),
ADDRESS_SID NUMBER(3),
ADDRESS_LCO DATE,
NADDRESS VARCHAR2(150 BYTE),
CITY VARCHAR2(150 BYTE),
CITY_SID NUMBER(3),
CITY_LCO DATE,
NCITY VARCHAR2(150 BYTE),
STATE VARCHAR2(150 BYTE),
STATE_SID NUMBER(3),
STATE_LCO DATE,
NSTATE VARCHAR2(150 BYTE),
POSTAL_CODE VARCHAR2(15 BYTE),
POSTAL_CODE_SID NUMBER(3),
POSTAL_CODE_LCO DATE,
NPOSTAL_CODE VARCHAR2(15 BYTE),
COUNTRY_ID VARCHAR2(10 BYTE),
COUNTRY_ID_SID NUMBER(3),
COUNTRY_ID_LCO DATE,
NCOUNTRY_ID VARCHAR2(10 BYTE),
TELEPHONE VARCHAR2(60 BYTE),
TELEPHONE_SID NUMBER(3),
TELEPHONE_LCO DATE,
NPHONE VARCHAR2(60 BYTE),
PHONE_7D VARCHAR2(60 BYTE),
PHONE_AREA VARCHAR2(60 BYTE),
FAX VARCHAR2(60 BYTE),
FAX_SID NUMBER(3),
FAX_LCO DATE,
NFAX VARCHAR2(60 BYTE),
GW_COMPANY_ID VARCHAR2(150 BYTE),
GW_COMPANY_ID_SID NUMBER(3),
GW_COMPANY_ID_LCO DATE,
CIK_NUMBER VARCHAR2(150 BYTE),
CIK_NUMBER_SID NUMBER(3),
CIK_NUMBER_LCO DATE,
IRS_EIN VARCHAR2(150 BYTE),
IRS_EIN_SID NUMBER(3),
IRS_EIN_LCO DATE,
LAST_CHANGED_BY VARCHAR2(50 BYTE) DEFAULT user NOT NULL,
LAST_CHANGED_ON DATE DEFAULT sysdate NOT NULL,
CREATED_ON DATE NOT NULL
) -
i have an imac g4 purchased Dec 2003 runnung OS 10.5.8. It runs fine with airport off, but when I turn airport on it freezes with the black page, "restart by holding power key . . ." I swapped the airport extreme card with the one in my ibook G4 (purchased same date and running same OS). No change in operation.
I am running wifi from verizon. Recently changed from mifi2200 to jetpak 4620 in a 3G location. Ibook running fine, desktop freezes. If I can boot desktop in safe mode and get airport turned off in time. then I can reboot regularly and imac runs flawlessly with no wireless.Have run disk utilities and TechTool Pro rebuild etc, but nothing has worked. How do I fine the culprit?the power logix thing was really sad. apple changed so much after 10.4.8 that there wasn't a viable way to patch the software.
That statement is precisely why I don't believe in blindly updating the OS, especially in a non-standard machine.
We can't expect third parties to support us forever, and it is shameful to break something that works fine, except that we updated the OS....
I think that any upgrade or modification to a machine or the OS greatly increases the risk of trouble or incompatibility with current configuration and "new" system files.
After all, the component or software could only be tested as far as the current OS version when the component or software was released.
Beyond that, we are all "beta testing".
Following a beta tester protocol, and applying updates to a cloned system drive first, is a prudent way to approach updates, and not only for older, heavily modified machines.
After 10.4.8 and moreso with Leopard, the focus is primarily on Intel architecture, not PPC architecture.
Like it or not, we are all updating to the abyss of the extinction of our machines, unless we can be satisfied with the last stable version of OS that works well with our hardware and software.
I wish they would include the latest pkgs at least with software update.
Yes, having individual packages, rather than lump "OS X 10.x.x" updates would be nice.
This way, one could update as one sees fit. That is to say, for example, fix the Quicktime, but leave my Network alone, etc., etc.
In all fairness, Apple does provide for some breakdown of updates, but I believe there is much room for improvement, especially, as you point out, with regard to the core services portion of the OS.
Until then, I'll leave Software Update disabled....... -
I can't seem to run my Playlist under Yahoo Music.. it runs fine with IE 9 but not Firefox 4 .... any idea why? I can run a single song just not my playlist.
Thanks.Had this problem for quite a while but found a work-a-round. I click anywhere in the text I want to delete and insert any character. I am then able to block and delete any text I want to. It's been working great.
-
WEBI working in Rich Client but giving error opendocument' api. (error err_wis_30270) in launch pad
Hi,
I transported webi documents + universe from a development server (BI 4.1. SP2) to a test server (same release). I can open the documents with the WEBI rich client, but I am unable to open them with the launch pad (error ...opendocument' api. (error err_wis_30270)).
Does anyone have a clue where there could be a difference in the settings that cause this behaviour?
Thanks,
Sandra.Can you check this KB?
1684675
- An internal error occurred while calling 'openDocument' API. (Error:
ERR_WIS_302070) while opening WebIntelligence reports in SAP BO BI 4.0. -
Sql Query is running fine in one database but running from long in other
Hi All,
Please advice me on below:
One query is running fine on 11gr2 database with having 2GB SGA and cost of the running query is 15, but the same query is running from long time in other database having same 2GB SGA.
Below is teh Query:
SELECT CDU.USER_NAME, DECODE(:B2 , 'QUEUE','begin
dbms_aqadm.grant_queue_privilege(''ALL'','''||:B1
||''','''||CDU.USER_NAME||''',true); end;', 'grant '||DECODE(:B2 ,
'TABLE','SELECT,INSERT,UPDATE,DELETE'||DECODE(CDU.ADMIN,'Y',',REFERENCES
',''), 'VIEW',DECODE(:B3 ,NULL,'SELECT','SELECT,INSERT,UPDATE,DELETE'||D
ECODE(CDU.ADMIN,'Y',',REFERENCES','')), 'TYPE','EXECUTE',
'SEQUENCE','SELECT', 'EXECUTE')||' on
'||PACK_UTILS.GET_SCHEMA_OWNER||'.'||:B1 ||' to
"'||CDU.USER_NAME||'"'||DECODE(CDU.ADMIN,'Y',' WITH GRANT OPTION',''))
AS GRANT_SOURCE, 'create or replace synonym
"'||CDU.USER_NAME||'"."'||:B1 ||'" for
"'||PACK_UTILS.GET_SCHEMA_OWNER||'"."'||:B1 ||'"' AS SYNONYM_SOURCE,
NVL2( S.TABLE_NAME, 'Y', 'N' ) SYNONYM_EXISTS FROM CD_USERS CDU,
ALL_SYNONYMS S, ALL_USERS U WHERE :B2 IN
('TYPE','TABLE','VIEW','FUNCTION','PROCEDURE','PACKAGE','SEQUENCE','QUEU
E','SYNONYM') AND CDU.USER_TYPE = 'S' AND CDU.USER_NAME = U.USERNAME
AND CDU.USER_NAME = S.OWNER AND :B1 = S.TABLE_NAME
Please advise me as application team is chasing me like anything. what I can find out is that Cost is different in both databases.Sorry forr Late reply friends..
below are the Explian plans for both databases:
BAD database
PLAN_TABLE_OUTPUT
SQL_ID 3bp3rynsds42r, child number 0
SELECT CDU.USER_NAME, DECODE(:B2 , 'QUEUE','begin
dbms_aqadm.grant_queue_privilege(''ALL'','''||:B1
||''','''||CDU.USER_NAME||''',true); end;', 'grant '||DECODE(:B2 ,
'TABLE','SELECT,INSERT,UPDATE,DELETE'||DECODE(CDU.ADMIN,'Y',',REFERENCES
',''), 'VIEW',DECODE(:B3 ,NULL,'SELECT','SELECT,INSERT,UPDATE,DELETE'||D
ECODE(CDU.ADMIN,'Y',',REFERENCES','')), 'TYPE','EXECUTE',
'SEQUENCE','SELECT', 'EXECUTE')||' on
'||PACK_UTILS.GET_SCHEMA_OWNER||'.'||:B1 ||' to
"'||CDU.USER_NAME||'"'||DECODE(CDU.ADMIN,'Y',' WITH GRANT OPTION',''))
PLAN_TABLE_OUTPUT
AS GRANT_SOURCE, 'create or replace synonym
"'||CDU.USER_NAME||'"."'||:B1 ||'" for
"'||PACK_UTILS.GET_SCHEMA_OWNER||'"."'||:B1 ||'"' AS SYNONYM_SOURCE,
NVL2( S.TABLE_NAME, 'Y', 'N' ) SYNONYM_EXISTS FROM CD_USERS CDU,
ALL_SYNONYMS S, ALL_USERS U WHERE :B2 IN
('TYPE','TABLE','VIEW','FUNCTION','PROCEDURE','PACKAGE','SEQUENCE','QUEU
E','SYNONYM') AND CDU.USER_TYPE = 'S' AND CDU.USER_NAME = U.USERNAME
AND CDU.USER_NAME = S.OWNER AND :B1 = S.TABLE_NAME
Plan hash value: 2404940060
PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | | | | 94 (100)| |
|* 1 | FILTER | | | | | | |
|* 2 | HASH JOIN | | 81 | 6723 | | 94 (0)| 00:00:01 |
| 3 | NESTED LOOPS OUTER | | 81 | 6480 | | 91 (0)| 00:00:01 |
|* 4 | HASH JOIN | | 81 | 3726 | | 10 (0)| 00:00:01 |
|* 5 | HASH JOIN | | 137 | 3699 | | 7 (0)| 00:00:01 |
| 6 | TABLE ACCESS FULL | TS$ | 7 | 21 | | 3 (0)| 00:00:01 |
|* 7 | TABLE ACCESS FULL | USER$ | 137 | 3288 | | 4 (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
|* 8 | TABLE ACCESS FULL | CD_USERS | 82 | 1558 | | 3 (0)| 00:00:01 |
| 9 | VIEW | ALL_SYNONYMS | 1 | 34 | | 1 (0)| 00:00:01 |
| 10 | SORT UNIQUE | | | | | | |
| 11 | UNION-ALL PARTITION | | | | | | |
|* 12 | FILTER | | | | | | |
| 13 | NESTED LOOPS | | 1 | 116 | | 60 (0)| 00:00:01 |
| 14 | NESTED LOOPS | | 1 | 94 | | 59 (0)| 00:00:01 |
| 15 | NESTED LOOPS | | 12 | 684 | | 23 (0)| 00:00:01 |
| 16 | TABLE ACCESS BY INDEX ROWID | USER$ | 1 | 19 | | 1 (0)| 00:00:01 |
|* 17 | INDEX UNIQUE SCAN | I_USER1 | 1 | | | 0 (0)| |
| 18 | TABLE ACCESS BY INDEX ROWID | SYN$ | 12 | 456 | | 22 (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
|* 19 | INDEX SKIP SCAN | I_SYN2 | 12 | | | 12 (0)| 00:00:01 |
|* 20 | TABLE ACCESS BY INDEX ROWID | OBJ$ | 1 | 37 | | 3 (0)| 00:00:01 |
|* 21 | INDEX RANGE SCAN | I_OBJ1 | 1 | | | 2 (0)| 00:00:01 |
|* 22 | INDEX RANGE SCAN | I_USER2 | 1 | 22 | | 1 (0)| 00:00:01 |
|* 23 | FIXED TABLE FULL | X$KZSPR | 17 | 119 | | 0 (0)| |
|* 24 | FILTER | | | | | | |
|* 25 | FILTER | | | | | | |
| 26 | NESTED LOOPS | | 27 | 2430 | | 6 (0)| 00:00:01 |
| 27 | NESTED LOOPS | | 1 | 78 | | 4 (0)| 00:00:01 |
| 28 | NESTED LOOPS | | 1 | 56 | | 3 (0)| 00:00:01 |
| 29 | TABLE ACCESS BY INDEX ROWID | USER$ | 1 | 19 | | 1 (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
|* 30 | INDEX UNIQUE SCAN | I_USER1 | 1 | | | 0 (0)| |
|* 31 | INDEX RANGE SCAN | I_OBJ5 | 1 | 37 | | 2 (0)| 00:00:01 |
|* 32 | INDEX RANGE SCAN | I_USER2 | 1 | 22 | | 1 (0)| 00:00:01 |
|* 33 | INDEX RANGE SCAN | I_OBJAUTH1 | 28 | 336 | | 2 (0)| 00:00:01 |
|* 34 | FIXED TABLE FULL | X$KZSRO | 1 | 3 | | 0 (0)| |
| 35 | NESTED LOOPS | | 1 | 30 | | 3 (0)| 00:00:01 |
|* 36 | INDEX SKIP SCAN | I_USER2 | 1 | 20 | | 1 (0)| 00:00:01 |
|* 37 | INDEX RANGE SCAN | I_OBJ4 | 1 | 10 | | 2 (0)| 00:00:01 |
| 38 | NESTED LOOPS | | 1 | 30 | | 3 (0)| 00:00:01 |
|* 39 | INDEX SKIP SCAN | I_USER2 | 1 | 20 | | 1 (0)| 00:00:01 |
|* 40 | INDEX RANGE SCAN | I_OBJ4 | 1 | 10 | | 2 (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
|* 41 | FILTER | | | | | | |
| 42 | NESTED LOOPS | | 1 | 129 | | 4301 (2)| 00:00:39 |
| 43 | NESTED LOOPS | | 1 | 129 | | 4301 (2)| 00:00:39 |
| 44 | NESTED LOOPS | | 1 | 91 | | 4299 (2)| 00:00:39 |
| 45 | NESTED LOOPS | | 1 | 69 | | 4298 (2)| 00:00:39 |
| 46 | NESTED LOOPS | | 2 | 64 | | 4292 (2)| 00:00:39 |
| 47 | TABLE ACCESS BY INDEX ROWID | USER$ | 1 | 19 | | 1 (0)| 00:00:01 |
|* 48 | INDEX UNIQUE SCAN | I_USER1 | 1 | | | 0 (0)| |
| 49 | VIEW | _ALL_SYNONYMS_TREE | 2 | 26 | | 4291 (2)| 00:00:39 |
|* 50 | CONNECT BY NO FILTERING WITH START-WITH| | | | | | |
|* 51 | FILTER | | | | | | |
PLAN_TABLE_OUTPUT
|* 52 | HASH JOIN | | 18370 | 2080K| | 4291 (2)| 00:00:39 |
| 53 | INDEX FULL SCAN | I_USER2 | 207 | 4554 | | 1 (0)| 00:00:01 |
|* 54 | HASH JOIN | | 18370 | 1686K| | 4290 (2)| 00:00:39 |
| 55 | TABLE ACCESS FULL | USER$ | 207 | 3933 | | 4 (0)| 00:00:01 |
|* 56 | HASH JOIN | | 2922K| 209M| 18M| 4269 (1)| 00:00:39 |
|* 57 | INDEX FAST FULL SCAN | I_OBJ2 | 387K| 13M| | 1323 (1)| 00:00:12 |
| 58 | TABLE ACCESS FULL | SYN$ | 400K| 14M| | 566 (2)| 00:00:06 |
| 59 | NESTED LOOPS | | 1 | 30 | | 3 (0)| 00:00:01 |
|* 60 | INDEX SKIP SCAN | I_USER2 | 1 | 20 | | 1 (0)| 00:00:01 |
|* 61 | INDEX RANGE SCAN | I_OBJ4 | 1 | 10 | | 2 (0)| 00:00:01 |
|* 62 | FILTER | | | | | | |
PLAN_TABLE_OUTPUT
| 63 | TABLE ACCESS BY INDEX ROWID | SYN$ | 1 | 38 | | 3 (0)| 00:00:01 |
|* 64 | INDEX UNIQUE SCAN | I_SYN1 | 1 | | | 2 (0)| 00:00:01 |
|* 65 | FILTER | | | | | | |
|* 66 | FILTER | | | | | | |
| 67 | NESTED LOOPS | | 27 | 2430 | | 6 (0)| 00:00:01 |
| 68 | NESTED LOOPS | | 1 | 78 | | 4 (0)| 00:00:01 |
| 69 | NESTED LOOPS | | 1 | 56 | | 3 (0)| 00:00:01 |
| 70 | TABLE ACCESS BY INDEX ROWID | USER$ | 1 | 19 | | 1 (0)| 00:00:01 |
|* 71 | INDEX UNIQUE SCAN | I_USER1 | 1 | | | 0 (0)| |
|* 72 | INDEX RANGE SCAN | I_OBJ5 | 1 | 37 | | 2 (0)| 00:00:01 |
|* 73 | INDEX RANGE SCAN | I_USER2 | 1 | 22 | | 1 (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
|* 74 | INDEX RANGE SCAN | I_OBJAUTH1 | 28 | 336 | | 2 (0)| 00:00:01 |
|* 75 | FIXED TABLE FULL | X$KZSRO | 1 | 3 | | 0 (0)| |
| 76 | NESTED LOOPS | | 1 | 30 | | 3 (0)| 00:00:01 |
|* 77 | INDEX SKIP SCAN | I_USER2 | 1 | 20 | | 1 (0)| 00:00:01 |
|* 78 | INDEX RANGE SCAN | I_OBJ4 | 1 | 10 | | 2 (0)| 00:00:01 |
|* 79 | FIXED TABLE FULL | X$KZSPR | 17 | 119 | | 0 (0)| |
|* 80 | TABLE ACCESS BY INDEX ROWID | OBJ$ | 1 | 37 | | 3 (0)| 00:00:01 |
|* 81 | INDEX RANGE SCAN | I_OBJ1 | 1 | | | 2 (0)| 00:00:01 |
|* 82 | INDEX RANGE SCAN | I_USER2 | 1 | 22 | | 1 (0)| 00:00:01 |
|* 83 | INDEX UNIQUE SCAN | I_SYN1 | 1 | | | 1 (0)| 00:00:01 |
|* 84 | TABLE ACCESS BY INDEX ROWID | SYN$ | 1 | 38 | | 2 (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
| 85 | NESTED LOOPS | | 1 | 30 | | 3 (0)| 00:00:01 |
|* 86 | INDEX SKIP SCAN | I_USER2 | 1 | 20 | | 1 (0)| 00:00:01 |
|* 87 | INDEX RANGE SCAN | I_OBJ4 | 1 | 10 | | 2 (0)| 00:00:01 |
| 88 | TABLE ACCESS FULL | TS$ | 7 | 21 | | 3 (0)| 00:00:01 |
Predicate Information (identified by operation id):
1 - filter((:B2='TYPE' OR :B2='TABLE' OR :B2='VIEW' OR :B2='FUNCTION' OR :B2='PROCEDURE' OR :B2='PACKAGE' OR
:B2='SEQUENCE' OR :B2='QUEUE' OR :B2='SYNONYM'))
PLAN_TABLE_OUTPUT
2 - access("U"."TEMPTS#"="TTS"."TS#")
4 - access("CDU"."USER_NAME"="U"."NAME")
5 - access("U"."DATATS#"="DTS"."TS#")
7 - filter("U"."TYPE#"=1)
8 - filter("CDU"."USER_TYPE"='S')
12 - filter(((INTERNAL_FUNCTION("O"."SPARE3") OR ("S"."NODE" IS NULL AND IS NOT NULL) OR IS NOT NULL) AND
(("O"."TYPE#"<>4 AND "O"."TYPE#"<>5 AND "O"."TYPE#"<>7 AND "O"."TYPE#"<>8 AND "O"."TYPE#"<>9 AND "O"."TYPE#"<>10 AND
"O"."TYPE#"<>11 AND "O"."TYPE#"<>12 AND "O"."TYPE#"<>13 AND "O"."TYPE#"<>14 AND "O"."TYPE#"<>22 AND "O"."TYPE#"<>87 AND
"O"."TYPE#"<>88) OR BITAND("U"."SPARE1",16)=0 OR (SYS_CONTEXT('userenv','current_edition_name')='ORA$BASE' AND
"U"."TYPE#"<>2) OR ("U"."TYPE#"=2 AND "U"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id'))) OR IS NOT
NULL)))
PLAN_TABLE_OUTPUT
17 - access("U"."NAME"="CDU"."USER_NAME")
19 - access("S"."NAME"=:B1)
filter("S"."NAME"=:B1)
20 - filter("O"."SPARE3"="U"."USER#")
21 - access("O"."OBJ#"="S"."OBJ#" AND "O"."TYPE#"=5)
filter("O"."TYPE#"=5)
22 - access("O"."OWNER#"="U"."USER#")
23 - filter((((-"KZSPRPRV")=(-45) OR (-"KZSPRPRV")=(-47) OR (-"KZSPRPRV")=(-48) OR (-"KZSPRPRV")=(-49) OR
(-"KZSPRPRV")=(-50)) AND "INST_ID"=USERENV('INSTANCE')))
24 - filter((("BA"."GRANTOR#"=USERENV('SCHEMAID') OR IS NOT NULL) AND (("O"."TYPE#"<>4 AND "O"."TYPE#"<>5 AND
"O"."TYPE#"<>7 AND "O"."TYPE#"<>8 AND "O"."TYPE#"<>9 AND "O"."TYPE#"<>10 AND "O"."TYPE#"<>11 AND "O"."TYPE#"<>12 AND
PLAN_TABLE_OUTPUT
"O"."TYPE#"<>13 AND "O"."TYPE#"<>14 AND "O"."TYPE#"<>22 AND "O"."TYPE#"<>87 AND "O"."TYPE#"<>88) OR
BITAND("U"."SPARE1",16)=0 OR (INTERNAL_FUNCTION("O"."TYPE#") AND
((SYS_CONTEXT('userenv','current_edition_name')='ORA$BASE' AND "U"."TYPE#"<>2) OR ("U"."TYPE#"=2 AND
"U"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id'))) OR IS NOT NULL)))))
25 - filter(:B1 IS NULL)
30 - access("BU"."NAME"=:B1)
31 - access("BU"."USER#"="O"."SPARE3" AND "O"."NAME"=:B1)
32 - access("O"."OWNER#"="U"."USER#")
33 - access("BA"."OBJ#"="O"."OBJ#")
34 - filter("KZSROROL"=:B1)
36 - access("U2"."TYPE#"=2 AND "U2"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id')))
PLAN_TABLE_OUTPUT
filter(("U2"."TYPE#"=2 AND "U2"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id'))))
37 - access("O2"."DATAOBJ#"=:B1 AND "O2"."TYPE#"=88 AND "O2"."OWNER#"="U2"."USER#")
39 - access("U2"."TYPE#"=2 AND "U2"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id')))
filter(("U2"."TYPE#"=2 AND "U2"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id'))))
40 - access("O2"."DATAOBJ#"=:B1 AND "O2"."TYPE#"=88 AND "O2"."OWNER#"="U2"."USER#")
41 - filter((("O"."TYPE#"<>4 AND "O"."TYPE#"<>5 AND "O"."TYPE#"<>7 AND "O"."TYPE#"<>8 AND "O"."TYPE#"<>9 AND
"O"."TYPE#"<>10 AND "O"."TYPE#"<>11 AND "O"."TYPE#"<>12 AND "O"."TYPE#"<>13 AND "O"."TYPE#"<>14 AND "O"."TYPE#"<>22 AND
"O"."TYPE#"<>87 AND "O"."TYPE#"<>88) OR BITAND("U"."SPARE1",16)=0 OR
(SYS_CONTEXT('userenv','current_edition_name')='ORA$BASE' AND "U"."TYPE#"<>2) OR ("U"."TYPE#"=2 AND
"U"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id'))) OR IS NOT NULL))
48 - access("U"."NAME"="CDU"."USER_NAME")
PLAN_TABLE_OUTPUT
50 - access("S"."BASE_SYN_ID"=PRIOR NULL)
filter( IS NOT NULL)
51 - filter((("O"."TYPE#"<>4 AND "O"."TYPE#"<>5 AND "O"."TYPE#"<>7 AND "O"."TYPE#"<>8 AND "O"."TYPE#"<>9 AND
"O"."TYPE#"<>10 AND "O"."TYPE#"<>11 AND "O"."TYPE#"<>12 AND "O"."TYPE#"<>13 AND "O"."TYPE#"<>14 AND "O"."TYPE#"<>22 AND
"O"."TYPE#"<>87 AND "O"."TYPE#"<>88) OR BITAND("U"."SPARE1",16)=0 OR
(SYS_CONTEXT('userenv','current_edition_name')='ORA$BASE' AND "U"."TYPE#"<>2) OR ("U"."TYPE#"=2 AND
"U"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id'))) OR IS NOT NULL))
52 - access("O"."OWNER#"="U"."USER#")
54 - access("S"."OWNER"="BU"."NAME" AND "BU"."USER#"="O"."SPARE3")
56 - access("S"."NAME"="O"."NAME")
57 - filter("O"."TYPE#"=5)
PLAN_TABLE_OUTPUT
60 - access("U2"."TYPE#"=2 AND "U2"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id')))
filter(("U2"."TYPE#"=2 AND "U2"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id'))))
61 - access("O2"."DATAOBJ#"=:B1 AND "O2"."TYPE#"=88 AND "O2"."OWNER#"="U2"."USER#")
62 - filter(( IS NOT NULL OR ("S"."NODE" IS NULL AND IS NOT NULL)))
64 - access("S"."OBJ#"=:B1)
65 - filter((("BA"."GRANTOR#"=USERENV('SCHEMAID') OR IS NOT NULL) AND (("O"."TYPE#"<>4 AND "O"."TYPE#"<>5 AND
"O"."TYPE#"<>7 AND "O"."TYPE#"<>8 AND "O"."TYPE#"<>9 AND "O"."TYPE#"<>10 AND "O"."TYPE#"<>11 AND "O"."TYPE#"<>12 AND
"O"."TYPE#"<>13 AND "O"."TYPE#"<>14 AND "O"."TYPE#"<>22 AND "O"."TYPE#"<>87 AND "O"."TYPE#"<>88) OR
BITAND("U"."SPARE1",16)=0 OR (INTERNAL_FUNCTION("O"."TYPE#") AND
((SYS_CONTEXT('userenv','current_edition_name')='ORA$BASE' AND "U"."TYPE#"<>2) OR ("U"."TYPE#"=2 AND
"U"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id'))) OR IS NOT NULL)))))
PLAN_TABLE_OUTPUT
66 - filter(:B1 IS NULL)
71 - access("BU"."NAME"=:B1)
72 - access("BU"."USER#"="O"."SPARE3" AND "O"."NAME"=:B1)
73 - access("O"."OWNER#"="U"."USER#")
74 - access("BA"."OBJ#"="O"."OBJ#")
75 - filter("KZSROROL"=:B1)
77 - access("U2"."TYPE#"=2 AND "U2"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id')))
filter(("U2"."TYPE#"=2 AND "U2"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id'))))
78 - access("O2"."DATAOBJ#"=:B1 AND "O2"."TYPE#"=88 AND "O2"."OWNER#"="U2"."USER#")
79 - filter((((-"KZSPRPRV")=(-45) OR (-"KZSPRPRV")=(-47) OR (-"KZSPRPRV")=(-48) OR (-"KZSPRPRV")=(-49) OR
(-"KZSPRPRV")=(-50)) AND "INST_ID"=USERENV('INSTANCE')))
PLAN_TABLE_OUTPUT
80 - filter("O"."SPARE3"="U"."USER#")
81 - access("O"."OBJ#"="ST"."SYN_ID" AND "O"."TYPE#"=5)
filter("O"."TYPE#"=5)
82 - access("O"."OWNER#"="U"."USER#")
83 - access("S"."OBJ#"="ST"."SYN_ID")
filter("O"."OBJ#"="S"."OBJ#")
84 - filter("S"."NAME"=:B1)
86 - access("U2"."TYPE#"=2 AND "U2"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id')))
filter(("U2"."TYPE#"=2 AND "U2"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id'))))
87 - access("O2"."DATAOBJ#"=:B1 AND "O2"."TYPE#"=88 AND "O2"."OWNER#"="U2"."USER#")
209 rows selected
==============================================================================================
Good one
PLAN_TABLE_OUTPUT
SQL_ID 3bp3rynsds42r, child number 0
SELECT CDU.USER_NAME, DECODE(:B2 , 'QUEUE','begin
dbms_aqadm.grant_queue_privilege(''ALL'','''||:B1
||''','''||CDU.USER_NAME||''',true); end;', 'grant '||DECODE(:B2 ,
'TABLE','SELECT,INSERT,UPDATE,DELETE'||DECODE(CDU.ADMIN,'Y',',REFERENCES
',''), 'VIEW',DECODE(:B3 ,NULL,'SELECT','SELECT,INSERT,UPDATE,DELETE'||D
ECODE(CDU.ADMIN,'Y',',REFERENCES','')), 'TYPE','EXECUTE',
'SEQUENCE','SELECT', 'EXECUTE')||' on
'||PACK_UTILS.GET_SCHEMA_OWNER||'.'||:B1 ||' to
"'||CDU.USER_NAME||'"'||DECODE(CDU.ADMIN,'Y',' WITH GRANT OPTION',''))
PLAN_TABLE_OUTPUT
AS GRANT_SOURCE, 'create or replace synonym
"'||CDU.USER_NAME||'"."'||:B1 ||'" for
"'||PACK_UTILS.GET_SCHEMA_OWNER||'"."'||:B1 ||'"' AS SYNONYM_SOURCE,
NVL2( S.TABLE_NAME, 'Y', 'N' ) SYNONYM_EXISTS FROM CD_USERS CDU,
ALL_SYNONYMS S, ALL_USERS U WHERE :B2 IN
('TYPE','TABLE','VIEW','FUNCTION','PROCEDURE','PACKAGE','SEQUENCE','QUEU
E','SYNONYM') AND CDU.USER_TYPE = 'S' AND CDU.USER_NAME = U.USERNAME
AND CDU.USER_NAME = S.OWNER AND :B1 = S.TABLE_NAME
Plan hash value: 2146531909
PLAN_TABLE_OUTPUT
| Id | Operation | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time |
| 0 | SELECT STATEMENT | | | | | 15 (100)| |
|* 1 | FILTER | | | | | | |
| 2 | NESTED LOOPS OUTER | | 3 | 273 | | 15 (0)| 00:00:01 |
| 3 | NESTED LOOPS | | 3 | 153 | | 12 (0)| 00:00:01 |
| 4 | NESTED LOOPS | | 3 | 144 | | 9 (0)| 00:00:01 |
| 5 | NESTED LOOPS | | 3 | 135 | | 6 (0)| 00:00:01 |
|* 6 | TABLE ACCESS FULL | USER$ | 55 | 1375 | | 4 (0)| 00:00:01 |
|* 7 | TABLE ACCESS BY INDEX ROWID | CD_USERS | 1 | 20 | | 1 (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
|* 8 | INDEX UNIQUE SCAN | I1_CD_USERS | 1 | | | 0 (0)| |
| 9 | TABLE ACCESS CLUSTER | TS$ | 1 | 3 | | 1 (0)| 00:00:01 |
|* 10 | INDEX UNIQUE SCAN | I_TS# | 1 | | | 0 (0)| |
| 11 | TABLE ACCESS CLUSTER | TS$ | 1 | 3 | | 1 (0)| 00:00:01 |
|* 12 | INDEX UNIQUE SCAN | I_TS# | 1 | | | 0 (0)| |
| 13 | VIEW | ALL_SYNONYMS | 1 | 40 | | 1 (0)| 00:00:01 |
| 14 | SORT UNIQUE | | | | | | |
| 15 | UNION-ALL PARTITION | | | | | | |
|* 16 | FILTER | | | | | | |
| 17 | NESTED LOOPS | | 1 | 116 | | 19 (0)| 00:00:01 |
| 18 | NESTED LOOPS | | 1 | 94 | | 18 (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
| 19 | NESTED LOOPS | | 1 | 56 | | 15 (0)| 00:00:01 |
| 20 | TABLE ACCESS BY INDEX ROWID | USER$ | 1 | 20 | | 1 (0)| 00:00:01 |
|* 21 | INDEX UNIQUE SCAN | I_USER1 | 1 | | | 0 (0)| |
| 22 | TABLE ACCESS BY INDEX ROWID | SYN$ | 1 | 36 | | 14 (0)| 00:00:01 |
|* 23 | INDEX SKIP SCAN | I_SYN2 | 1 | | | 12 (0)| 00:00:01 |
|* 24 | TABLE ACCESS BY INDEX ROWID | OBJ$ | 1 | 38 | | 3 (0)| 00:00:01 |
|* 25 | INDEX RANGE SCAN | I_OBJ1 | 1 | | | 2 (0)| 00:00:01 |
|* 26 | INDEX RANGE SCAN | I_USER2 | 1 | 22 | | 1 (0)| 00:00:01 |
|* 27 | FIXED TABLE FULL | X$KZSPR | 17 | 119 | | 0 (0)| |
|* 28 | FILTER | | | | | | |
|* 29 | FILTER | | | | | | |
PLAN_TABLE_OUTPUT
| 30 | NESTED LOOPS | | 3 | 279 | | 5 (0)| 00:00:01 |
| 31 | NESTED LOOPS | | 1 | 80 | | 4 (0)| 00:00:01 |
| 32 | NESTED LOOPS | | 1 | 58 | | 3 (0)| 00:00:01 |
| 33 | TABLE ACCESS BY INDEX ROWID | USER$ | 1 | 20 | | 1 (0)| 00:00:01 |
|* 34 | INDEX UNIQUE SCAN | I_USER1 | 1 | | | 0 (0)| |
|* 35 | INDEX RANGE SCAN | I_OBJ5 | 1 | 38 | | 2 (0)| 00:00:01 |
|* 36 | INDEX RANGE SCAN | I_USER2 | 1 | 22 | | 1 (0)| 00:00:01 |
|* 37 | INDEX RANGE SCAN | I_OBJAUTH1 | 3 | 39 | | 1 (0)| 00:00:01 |
|* 38 | FIXED TABLE FULL | X$KZSRO | 1 | 3 | | 0 (0)| |
| 39 | NESTED LOOPS | | 1 | 32 | | 3 (0)| 00:00:01 |
|* 40 | INDEX SKIP SCAN | I_USER2 | 1 | 20 | | 1 (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
|* 41 | INDEX RANGE SCAN | I_OBJ4 | 1 | 12 | | 2 (0)| 00:00:01 |
| 42 | NESTED LOOPS | | 1 | 32 | | 3 (0)| 00:00:01 |
|* 43 | INDEX SKIP SCAN | I_USER2 | 1 | 20 | | 1 (0)| 00:00:01 |
|* 44 | INDEX RANGE SCAN | I_OBJ4 | 1 | 12 | | 2 (0)| 00:00:01 |
|* 45 | FILTER | | | | | | |
| 46 | NESTED LOOPS | | 1 | 129 | | 1065 (1)| 00:00:13 |
| 47 | NESTED LOOPS | | 1 | 107 | | 1064 (1)| 00:00:13 |
| 48 | NESTED LOOPS | | 1 | 69 | | 1061 (1)| 00:00:13 |
| 49 | NESTED LOOPS | | 2 | 66 | | 1059 (1)| 00:00:13 |
| 50 | TABLE ACCESS BY INDEX ROWID | USER$ | 1 | 20 | | 1 (0)| 00:00:01 |
|* 51 | INDEX UNIQUE SCAN | I_USER1 | 1 | | | 0 (0)| |
PLAN_TABLE_OUTPUT
| 52 | VIEW | _ALL_SYNONYMS_TREE | 2 | 26 | | 1058 (1)| 00:00:13 |
|* 53 | CONNECT BY NO FILTERING WITH START-WITH| | | | | | |
|* 54 | FILTER | | | | | | |
|* 55 | HASH JOIN | | 705 | 81780 | | 1058 (1)| 00:00:13 |
| 56 | INDEX FULL SCAN | I_USER2 | 124 | 2728 | | 1 (0)| 00:00:01 |
|* 57 | HASH JOIN | | 705 | 66270 | | 1057 (1)| 00:00:13 |
| 58 | TABLE ACCESS FULL | USER$ | 124 | 2480 | | 4 (0)| 00:00:01 |
|* 59 | HASH JOIN | | 66964 | 4839K| 2232K| 1052 (1)| 00:00:13 |
| 60 | TABLE ACCESS FULL | SYN$ | 47615 | 1673K| | 78 (2)| 00:00:01 |
|* 61 | INDEX FAST FULL SCAN | I_OBJ5 | 47862 | 1776K| | 752 (1)| 00:00:10 |
| 62 | NESTED LOOPS | | 1 | 32 | | 3 (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
|* 63 | INDEX SKIP SCAN | I_USER2 | 1 | 20 | | 1 (0)| 00:00:01 |
|* 64 | INDEX RANGE SCAN | I_OBJ4 | 1 | 12 | | 2 (0)| 00:00:01 |
|* 65 | FILTER | | | | | | |
| 66 | TABLE ACCESS BY INDEX ROWID | SYN$ | 1 | 36 | | 2 (0)| 00:00:01 |
|* 67 | INDEX UNIQUE SCAN | I_SYN1 | 1 | | | 1 (0)| 00:00:01 |
|* 68 | FILTER | | | | | | |
|* 69 | FILTER | | | | | | |
| 70 | NESTED LOOPS | | 3 | 279 | | 5 (0)| 00:00:01 |
| 71 | NESTED LOOPS | | 1 | 80 | | 4 (0)| 00:00:01 |
| 72 | NESTED LOOPS | | 1 | 58 | | 3 (0)| 00:00:01 |
| 73 | TABLE ACCESS BY INDEX ROWID | USER$ | 1 | 20 | | 1 (0)| 00:00:01 |
PLAN_TABLE_OUTPUT
|* 74 | INDEX UNIQUE SCAN | I_USER1 | 1 | | | 0 (0)| |
|* 75 | INDEX RANGE SCAN | I_OBJ5 | 1 | 38 | | 2 (0)| 00:00:01 |
|* 76 | INDEX RANGE SCAN | I_USER2 | 1 | 22 | | 1 (0)| 00:00:01 |
|* 77 | INDEX RANGE SCAN | I_OBJAUTH1 | 3 | 39 | | 1 (0)| 00:00:01 |
|* 78 | FIXED TABLE FULL | X$KZSRO | 1 | 3 | | 0 (0)| |
| 79 | NESTED LOOPS | | 1 | 32 | | 3 (0)| 00:00:01 |
|* 80 | INDEX SKIP SCAN | I_USER2 | 1 | 20 | | 1 (0)| 00:00:01 |
|* 81 | INDEX RANGE SCAN | I_OBJ4 | 1 | 12 | | 2 (0)| 00:00:01 |
|* 82 | FIXED TABLE FULL | X$KZSPR | 17 | 119 | | 0 (0)| |
|* 83 | TABLE ACCESS BY INDEX ROWID | SYN$ | 1 | 36 | | 1 (0)| 00:00:01 |
|* 84 | INDEX UNIQUE SCAN | I_SYN1 | 1 | | | 0 (0)| |
PLAN_TABLE_OUTPUT
|* 85 | TABLE ACCESS BY INDEX ROWID | OBJ$ | 1 | 38 | | 3 (0)| 00:00:01 |
|* 86 | INDEX RANGE SCAN | I_OBJ1 | 1 | | | 2 (0)| 00:00:01 |
|* 87 | INDEX RANGE SCAN | I_USER2 | 1 | 22 | | 1 (0)| 00:00:01 |
| 88 | NESTED LOOPS | | 1 | 32 | | 3 (0)| 00:00:01 |
|* 89 | INDEX SKIP SCAN | I_USER2 | 1 | 20 | | 1 (0)| 00:00:01 |
|* 90 | INDEX RANGE SCAN | I_OBJ4 | 1 | 12 | | 2 (0)| 00:00:01 |
Predicate Information (identified by operation id):
PLAN_TABLE_OUTPUT
1 - filter((:B2='TYPE' OR :B2='TABLE' OR :B2='VIEW' OR :B2='FUNCTION' OR :B2='PROCEDURE' OR :B2='PACKAGE' OR
:B2='SEQUENCE' OR :B2='QUEUE' OR :B2='SYNONYM'))
6 - filter("U"."TYPE#"=1)
7 - filter("CDU"."USER_TYPE"='S')
8 - access("CDU"."USER_NAME"="U"."NAME")
10 - access("U"."DATATS#"="DTS"."TS#")
12 - access("U"."TEMPTS#"="TTS"."TS#")
16 - filter(((INTERNAL_FUNCTION("O"."SPARE3") OR ("S"."NODE" IS NULL AND IS NOT NULL) OR IS NOT NULL) AND
(("O"."TYPE#"<>4 AND "O"."TYPE#"<>5 AND "O"."TYPE#"<>7 AND "O"."TYPE#"<>8 AND "O"."TYPE#"<>9 AND "O"."TYPE#"<>10 AND
"O"."TYPE#"<>11 AND "O"."TYPE#"<>12 AND "O"."TYPE#"<>13 AND "O"."TYPE#"<>14 AND "O"."TYPE#"<>22 AND "O"."TYPE#"<>87 AND
"O"."TYPE#"<>88) OR BITAND("U"."SPARE1",16)=0 OR (SYS_CONTEXT('userenv','current_edition_name')='ORA$BASE' AND
PLAN_TABLE_OUTPUT
"U"."TYPE#"<>2) OR ("U"."TYPE#"=2 AND "U"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id'))) OR IS NOT
NULL)))
21 - access("U"."NAME"="CDU"."USER_NAME")
23 - access("S"."NAME"=:B1)
filter("S"."NAME"=:B1)
24 - filter("O"."SPARE3"="U"."USER#")
25 - access("O"."OBJ#"="S"."OBJ#" AND "O"."TYPE#"=5)
filter("O"."TYPE#"=5)
26 - access("O"."OWNER#"="U"."USER#")
27 - filter((((-"KZSPRPRV")=(-45) OR (-"KZSPRPRV")=(-47) OR (-"KZSPRPRV")=(-48) OR (-"KZSPRPRV")=(-49) OR
(-"KZSPRPRV")=(-50)) AND "INST_ID"=USERENV('INSTANCE')))
PLAN_TABLE_OUTPUT
28 - filter((("BA"."GRANTOR#"=USERENV('SCHEMAID') OR IS NOT NULL) AND (("O"."TYPE#"<>4 AND "O"."TYPE#"<>5 AND
"O"."TYPE#"<>7 AND "O"."TYPE#"<>8 AND "O"."TYPE#"<>9 AND "O"."TYPE#"<>10 AND "O"."TYPE#"<>11 AND "O"."TYPE#"<>12 AND
"O"."TYPE#"<>13 AND "O"."TYPE#"<>14 AND "O"."TYPE#"<>22 AND "O"."TYPE#"<>87 AND "O"."TYPE#"<>88) OR
BITAND("U"."SPARE1",16)=0 OR (INTERNAL_FUNCTION("O"."TYPE#") AND
((SYS_CONTEXT('userenv','current_edition_name')='ORA$BASE' AND "U"."TYPE#"<>2) OR ("U"."TYPE#"=2 AND
"U"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id'))) OR IS NOT NULL)))))
29 - filter(:B1 IS NULL)
34 - access("BU"."NAME"=:B1)
35 - access("BU"."USER#"="O"."SPARE3" AND "O"."NAME"=:B1)
36 - access("O"."OWNER#"="U"."USER#")
37 - access("BA"."OBJ#"="O"."OBJ#")
PLAN_TABLE_OUTPUT
38 - filter("KZSROROL"=:B1)
40 - access("U2"."TYPE#"=2 AND "U2"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id')))
filter(("U2"."TYPE#"=2 AND "U2"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id'))))
41 - access("O2"."DATAOBJ#"=:B1 AND "O2"."TYPE#"=88 AND "O2"."OWNER#"="U2"."USER#")
43 - access("U2"."TYPE#"=2 AND "U2"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id')))
filter(("U2"."TYPE#"=2 AND "U2"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id'))))
44 - access("O2"."DATAOBJ#"=:B1 AND "O2"."TYPE#"=88 AND "O2"."OWNER#"="U2"."USER#")
45 - filter((("O"."TYPE#"<>4 AND "O"."TYPE#"<>5 AND "O"."TYPE#"<>7 AND "O"."TYPE#"<>8 AND "O"."TYPE#"<>9 AND
"O"."TYPE#"<>10 AND "O"."TYPE#"<>11 AND "O"."TYPE#"<>12 AND "O"."TYPE#"<>13 AND "O"."TYPE#"<>14 AND "O"."TYPE#"<>22 AND
"O"."TYPE#"<>87 AND "O"."TYPE#"<>88) OR BITAND("U"."SPARE1",16)=0 OR
(SYS_CONTEXT('userenv','current_edition_name')='ORA$BASE' AND "U"."TYPE#"<>2) OR ("U"."TYPE#"=2 AND
PLAN_TABLE_OUTPUT
"U"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id'))) OR IS NOT NULL))
51 - access("U"."NAME"="CDU"."USER_NAME")
53 - access("S"."BASE_SYN_ID"=PRIOR NULL)
filter( IS NOT NULL)
54 - filter((("O"."TYPE#"<>4 AND "O"."TYPE#"<>5 AND "O"."TYPE#"<>7 AND "O"."TYPE#"<>8 AND "O"."TYPE#"<>9 AND
"O"."TYPE#"<>10 AND "O"."TYPE#"<>11 AND "O"."TYPE#"<>12 AND "O"."TYPE#"<>13 AND "O"."TYPE#"<>14 AND "O"."TYPE#"<>22 AND
"O"."TYPE#"<>87 AND "O"."TYPE#"<>88) OR BITAND("U"."SPARE1",16)=0 OR
(SYS_CONTEXT('userenv','current_edition_name')='ORA$BASE' AND "U"."TYPE#"<>2) OR ("U"."TYPE#"=2 AND
"U"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id'))) OR IS NOT NULL))
55 - access("O"."OWNER#"="U"."USER#")
57 - access("S"."OWNER"="BU"."NAME" AND "BU"."USER#"="O"."SPARE3")
PLAN_TABLE_OUTPUT
59 - access("S"."NAME"="O"."NAME")
61 - filter("O"."TYPE#"=5)
63 - access("U2"."TYPE#"=2 AND "U2"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id')))
filter(("U2"."TYPE#"=2 AND "U2"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id'))))
64 - access("O2"."DATAOBJ#"=:B1 AND "O2"."TYPE#"=88 AND "O2"."OWNER#"="U2"."USER#")
65 - filter(( IS NOT NULL OR ("S"."NODE" IS NULL AND IS NOT NULL)))
67 - access("S"."OBJ#"=:B1)
68 - filter((("BA"."GRANTOR#"=USERENV('SCHEMAID') OR IS NOT NULL) AND (("O"."TYPE#"<>4 AND "O"."TYPE#"<>5 AND
"O"."TYPE#"<>7 AND "O"."TYPE#"<>8 AND "O"."TYPE#"<>9 AND "O"."TYPE#"<>10 AND "O"."TYPE#"<>11 AND "O"."TYPE#"<>12 AND
"O"."TYPE#"<>13 AND "O"."TYPE#"<>14 AND "O"."TYPE#"<>22 AND "O"."TYPE#"<>87 AND "O"."TYPE#"<>88) OR
BITAND("U"."SPARE1",16)=0 OR (INTERNAL_FUNCTION("O"."TYPE#") AND
PLAN_TABLE_OUTPUT
((SYS_CONTEXT('userenv','current_edition_name')='ORA$BASE' AND "U"."TYPE#"<>2) OR ("U"."TYPE#"=2 AND
"U"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id'))) OR IS NOT NULL)))))
69 - filter(:B1 IS NULL)
74 - access("BU"."NAME"=:B1)
75 - access("BU"."USER#"="O"."SPARE3" AND "O"."NAME"=:B1)
76 - access("O"."OWNER#"="U"."USER#")
77 - access("BA"."OBJ#"="O"."OBJ#")
78 - filter("KZSROROL"=:B1)
80 - access("U2"."TYPE#"=2 AND "U2"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id')))
filter(("U2"."TYPE#"=2 AND "U2"."SPARE2"=TO_NUMBER(SYS_CONTEXT('userenv','current_edition_id'))))
81 - access("O2"."DATAOBJ#"=:B1 AND "O2"."TY -
Bex Query- Use of ABAP code in Calculated Keyfigure/formula
Dear Experts.
I am wondering if there is any way to use ABAP in the formula editor of the Bex Query desinger.
I have to build a report with very complex formulas (a lot of key figures, comporations, If then else ) an I think it would be easier to build all then in ABAP.
So what I am looking for is any kind of user-exit/Badi that allows to calculate a Calculated Key figure/fomula in ABAP with the same data that is availabe in the fomula editor.
If SAP is not providing this, this is clearlly a must for next releases.
Thanks a lot and best regards,
Alfonso.Dear Ananda.
Thnaks for your reply, but could you please extend your answer a little bit more?
As far as I know, Formula customer exit variables are only called once and they don´t provide the rest of the keyfigures and characteristic use in the drilldown level, so for my needs they are useless.
Regarding IF-then-else statement in the formula, I already know about it. Actually what I am trying to avoid is to use them. In order to build my query I might need to build really big formulas with a lot of If-then-else, making it quite complex what the formula is doing. This is the reson I want to do it on ABAP.
Please any other ideas?
Thanks a lot. -
#UNAVAILABLE in WebI with BEx Query via BICS over ECC
dear all
i have a very simple problem to explain.
when i try to use =Month([Flight date]) function, my key figure returns #UNAVAILABLE
that's it !
of course, without the function, the key figures are good, but i get every darn date, but that is not what i want. i want to sum up the amounts for each of the months.
when responding, please be mindful that there is no universe here, as it is via BICS.
thanks
ghi sven
it is a date field, in fact it is a time dimension. so no problems there, but i tried this to test
=ToDate([Flight date];"dd/mm/yyyy")
this function works but does not help my scenario as i already have the full date and it did not group at all, but the interesting thing here, is that i lost my measure to #UNAVAILABLE.
i thought i would try
=ToDate([Flight date];"mm/yyyy")
which gave #ERROR in the field and still #UNAVAILABLE in the measure. i guess you must have the "d" in there somewhere.
i then tried to proove the [Flight date] is recognized as a date by doing
=IsDate([Flight date])
the records came back with 1, which proves they are recognized as a date. so i cannot use subst as it requires a string. but this is going down the wrong path anyway.
then i tried
=FormatDate([Flight date];"mmm/yyyy")
which does this Apr/2011 for example, goes near and will do what I want to achive, but yet again the measure is #UNAVAILABLE again.
it seems that it just does not work.
i am this close of logging an SAP support error
I can get my grouping to work if I create a Month field in the source, and outside WebI, but i don't really want to do that. I want the variable webi dimension to work as it should, or i believe it should -
Code runs fine in debug mode but hangs when compiled in release mode
I am struggling with the following problem. I have code which runs fine when it is executed in debug mode. However, when I compile it in release mode and run the executable, the code freezes and does not work. The code acquires images from a Hamamatsu camera. In the debug mode I am able to continuously acquire images. However, in the release version, the code hangs after acquiring the first image.
I am using LabWindows/CVI version 7.
I would greatly appreciate if I can get any help/suggestions in resolving this problem?
Thanks!
Regards,
Sripad
Solved!
Go to Solution.Sripad:
If you search this forum for "debug release crash" or "release version crash" or similar phrases, you'll find that this is a pretty common question. Look through the other posts you find here to see if anything is applicable to you.
The debug version does some things like padding variables so you can sometimes overrun your declared variable space without overwriting the next variable. In the release, the variables are packed, so if you overrun one, you are overwriting another. Just one possible difference.
You can do some things in your release code to see where things get lost, like (temporarily using printf statements after multiple statements at the start and end of your loop to try to identify that failing line of code.
Look through other threads to find other ideas. -
Program running fine in Debug mode but failing in direct execution
Hi All,
I am facing a peculiar problem, I have created a report that create STO then Delivery and then Shipment one after one. I have used BAPI to do so. If STO creation is successful then Create Delivery and if delivery creation is also successfull then create Shipment.
When I run this program by pressing execute button it is only creating STO and coming out ,but if I run it in Debug mode I get all the three( STO, Delivey,Shipment). Since it run fine in debug so I can't found where the problem is.
Can any one help???
Regards
HemantHi guys,
A learning for me .... how important WAIt parmeter is in commit work .. Initially i have not set WAIT paramater in commit BAPI to X due to this further processing.. Delivery and Shipment creation was failing in direct execution ... as after STO creation I was reding EKPO and that was failing in direct execution , but in backgroung everything was ok.
Thanks for your time.
Cheers
Hemant -
Why does my program run fine in highlight execution, but not normally?
When I highlight execution, the program runs fine, but when I run the program normally, nothing happens. (I believe the program is stuck at the initialize cam vi). If someone could help me out, I'd be very thankful
Attachments:
intensity10.vi 139 KBThe first troubleshooting technique I did was to add several "waits" throughout the program, particularily with the loops. I learned the problem was actually with the hardware itself and the camera mode. The camera must take an empty frame before it can store the image, thus the for loop needed to be replaced with a while loop.
However, after fixing the program using boolean logic, 2 of the buttons disappear on my front panel during use (which I will have to further troubleshoot). Thank you!
Attachments:
intensity11.vi 158 KB -
Using the Run feature to open Thunderbird - my husband and I have separate email accounts here...... but after doing a spyware/malware clean up - the Run command that was saved is gone and I don't know what it was to go find our emails........
"C:\Program Files (x86)\Mozilla Thunderbird\thunderbird.exe" -ProfileManager
or
"C:\Program Files\Mozilla Thunderbird\thunderbird.exe" -ProfileManager
Instead of using run all the time, do the following.
After you work out which run actually works.
Right click your desktop and select new and then shortcut.
In the location of the item, paste the run command that works. (Ctrl_V will paste. Selecting text and pressing Ctrl+C will copy. So even though there is no paste button or menu you can still paste.
Click next, Check the title information and Finish.
Now there will be an icon on the desktop to open Thunderbird and you can pick the profile from the list. -
Query running fine in one environment but failing in other environment
Hi,
I have a query which i am trying to execute in two different environments.
Test :- Oracle Database 11g Release 11.2.0.1.0 - 64bit Production
Prod:- Oracle Database 11g Release 11.2.0.1.0 - 64bit Production
Now query executes finely in one environment and fails in other environment.
It gives following error.
ORA-01861: literal does not match format string
01861. 00000 - "literal does not match format string"
The query is too long and contains CHAR-DATE and DATE-CHAR conversions.
The same query works fine on TEST environment and and fails on PROD environment.
Any help related to it would be appreciated.
Thanks,
MaheshMaheshGx wrote:
Hi,
I have a query which i am trying to execute in two different environments.
Test :- Oracle Database 11g Release 11.2.0.1.0 - 64bit Production
Prod:- Oracle Database 11g Release 11.2.0.1.0 - 64bit Production
Now query executes finely in one environment and fails in other environment.
It gives following error.
ORA-01861: literal does not match format string
01861. 00000 - "literal does not match format string"
The query is too long and contains CHAR-DATE and DATE-CHAR conversions.
The same query works fine on TEST environment and and fails on PROD environment.
Any help related to it would be appreciated.
Thanks,
MaheshThat's called a bug. One caused by the person who developed the code. They relied on implicit conversion between strings and dates when
production quality code will always use to_char and to_date functions with a format mask.
Maybe you are looking for
-
my ipad screen is black and will not reset and does not come back after restoring, the info is still on internal because i can see it on itunes in the apps catagory it's the display is not working, can see backlight but black...does anyone know how t
-
Which models of Airport Extreme are compatible with OS 10.4.11? Is there a tech spec page listing all models & their system requirements?
-
at my home pc i can get the canvas to draw a graph, but when i compile and run this exact same java-file at my laptop i only see a flash of my graph and then it just gets white and this isn't the background.
-
How i can use flash player on my iPad?
How i can use flash player on my iPad?
-
HT4623 Ipad will not upgrade past ios 5
Is my original ipad capable of going past ios 5.01? It tried to get 6 at one time, now just says it is up to date.