Code runs fine in debug mode but hangs when compiled in release mode

I am struggling with the following problem. I have code which runs fine when it is executed in debug mode. However, when I compile it in release mode and run the executable, the code freezes and does not work. The code acquires images from a Hamamatsu camera. In the debug mode I am able to continuously acquire images. However, in the release version, the code hangs after acquiring the first image.
I am using LabWindows/CVI version 7.
I would greatly appreciate if I can get any help/suggestions in resolving this problem?
Thanks!
Regards,
Sripad
Solved!
Go to Solution.

Sripad:
If you search this forum for "debug release crash" or "release version crash" or similar phrases, you'll find that this is a pretty common question.  Look through the other posts you find here to see if anything is applicable to you.
The debug version does some things like padding variables so you can sometimes overrun your declared variable space without overwriting the next variable.  In the release, the variables are packed, so if you overrun one, you are overwriting another.  Just one possible difference.
You can do some things in your release code to see where things get lost, like (temporarily using printf statements after multiple statements at the start and end of your loop to try to identify that failing line of code.
Look through other threads to find other ideas.

Similar Messages

  • Program running fine in Debug mode but failing in direct execution

    Hi All,
    I am facing a peculiar problem, I have created a report that create STO then Delivery and then Shipment one after one. I have used BAPI to do so. If STO creation is successful then Create Delivery and if delivery creation is also successfull then create Shipment.
    When I run this program by pressing execute button it is only creating STO and coming out ,but if I run it in Debug mode I get all the three( STO, Delivey,Shipment). Since it run fine in debug so I can't found where the problem is.
    Can any one help???
    Regards
    Hemant

    Hi guys,
    A learning for me .... how important WAIt parmeter is in commit work .. Initially i have not set WAIT paramater in commit BAPI to X due to this further processing.. Delivery and Shipment creation was failing in direct execution ... as after STO creation I was reding EKPO and that was failing in direct execution , but in backgroung everything was ok.
    Thanks for your time.
    Cheers
    Hemant

  • Sun Studio code hangs at fork, GCC code runs fine

    I am encountering a strange problem where code complied with GCC runs fine, but the same code compiled with Sun Studio 12 compiler hangs at a fork call after an initial set of fork calls.
    I'd appreciate your help in solving this.
    The code was originally written for GCC, I started using the Sun Studio with a view to using Sun's thread analyzer. I made a couple of changes which I think are inoccuous:
    (a) added #ifdef __SUNPRO_CC char * __FUNCTION__ = "name"; #endif
    (b) one more #ifdef around one call to ctime_r because the g++ include expects 2 parameters while Sun Studio 12 expects 3 parameters.
    The g++ is compiled on a Solaris 9 (1 x sparcv9) using GCC 3.3.3
    while the Sun Studio 12 is on a Solaris 10 ( 4 x sparcv9).
    Both runs were on the same Solaris 10 machine which has the compiler.
    The program is a multi instance socket listener, the main program binds to a socket, then forks off a set of processes which accept connections, those children later fork off other client applications based on the connection data; after those clients exit, the children continue accepting etc. The main program only monitors the child processes, records their status and starts if any of those die.
    This is working as expected when compiled with g++.
    The exact same code (note the two sets of #ifdefs above) when compiled with Sun PRO CC alway hangs at the second set of fork. That is, it goes through the first set of forks fine, then when a connection is established, it reads the data but hangs right at the fork call.
    The application code at this point is:
    char * p = pathfind( getenv("PATH"), progname );
    if ( !p ) {  printError(); return false; }
    pid = fork();
    The truss for the Sun Studio code shows
    23914: access("/usr/bin/progname", X_OK) = Err#2 ENOENT
    23914: access("/usr/you/bin/progname", X_OK) = 0
    23914: lwp_park(0x0000000, 0) (sleeping)
    while the truss for the g++ code shows
    23986: access("/usr/bin/progname", X_OK) = Err#2 ENOENT
    23986: access("/usr/you/bin/progname", X_OK) = 0
    23996: fork1() = 24005
    What am I doing wrong?
    Thanks and best regards

    If I understand correctly, you are compiling with gcc on Solaris 9, and with Sun Studio on Solaris 10. Since the OS is different, you might be running into OS issues and not compiler issues. What happens if you build with the same gcc version on the Solaris 10 system where you see the problem?
    By "OS issues", I mean
    1. The program uses unstable or undocumented OS interfaces, or
    2. A bug that is new in Solaris 10.
    A bug was identified in Solaris 10 that could cause forks to hang. It showed up in the libpkcs11 library as used by the JVM. I don't know whether it showed up elsewhere.
    This bug was fixed in Solaris 10u2. If you are using an earlier version of Solaris 10, you could try upgrading.

  • I have an imac g4 purchased Dec 2003 runnung OS 10.5.8.  It runs fine with airport off, but when I turn airport on it freezes with the black page,  "restart by holding power key . . ."  I swapped the airport extreme card with the one in my ibook G4 (purch

    i have an imac g4 purchased Dec 2003 runnung OS 10.5.8.  It runs fine with airport off, but when I turn airport on it freezes with the black page,  "restart by holding power key . . ."  I swapped the airport extreme card with the one in my ibook G4 (purchased same date and running same OS).  No change in operation.
    I am running wifi from verizon.  Recently changed from mifi2200 to jetpak 4620 in a 3G location.  Ibook running fine, desktop freezes.  If I can boot desktop in safe mode and get airport turned off in time. then I can reboot regularly and imac runs flawlessly with no wireless.Have run disk utilities and TechTool Pro rebuild etc, but nothing has worked.  How do I fine the culprit?

    the power logix thing was really sad. apple changed so much after 10.4.8 that there wasn't a viable way to patch the software.
    That statement is precisely why I don't believe in blindly updating the OS, especially in a non-standard machine.
    We can't expect third parties to support us forever, and it is shameful to break something that works fine, except that we updated the OS....
    I think that any upgrade or modification to a machine or the OS greatly increases the risk of trouble or incompatibility with current configuration and "new" system files.
    After all, the component or software could only be tested as far as the current OS version when the component or software was released.
    Beyond that, we are all "beta testing".
    Following a beta tester protocol, and applying updates to a cloned system drive first, is a prudent way to approach updates, and not only for older, heavily modified machines.
    After 10.4.8 and moreso with Leopard, the focus is primarily on Intel architecture, not PPC architecture.
    Like it or not, we are all updating to the abyss of the extinction of our machines, unless we can be satisfied with the last stable version of OS that works well with our hardware and software.
    I wish they would include the latest pkgs at least with software update.
    Yes, having individual packages, rather than lump "OS X 10.x.x" updates would be nice.
    This way, one could update as one sees fit. That is to say, for example, fix the Quicktime, but leave my Network alone, etc., etc.
    In all fairness, Apple does provide for some breakdown of updates, but I believe there is much room for improvement, especially, as you point out, with regard to the core services portion of the OS.
    Until then, I'll leave Software Update disabled.......

  • Same exact update runs fine in one db but causes ORA-00904 in another

    I have an update statement that runs fine in one db but causes "" error in another. The two databases table structures are the same. I checked for synonyms and reserved words on BASE and COMPANY_ID but did not come up with anything. The db where it is working is 10.2. The db where it is not working is 10.1.
    Here is the statement:
    1 UPDATE t_company base
    2 SET (company_name, company_name_sid, company_name_lco, canonical_name,
    3 short_name, short_name2) =
    4 (SELECT company_name, source_id, company_name_lco, canonical_name,
    5 short_name, short_name2
    6 FROM t_auth_company comp
    7 WHERE comp.company_id = base.company_id
    8 AND source_id =
    9 (SELECT source_id
    10 FROM (SELECT auth.source_id, trumping_order
    11 FROM t_auth_company auth,
    12 t_trumping_rule rl
    13 WHERE auth.company_id = base.company_id
    14 AND auth.company_name IS NOT NULL
    15 AND rl.source_id = auth.source_id
    16 AND rl.attribute_id = 'abc'
    17 ORDER BY rl.trumping_order)
    18 WHERE ROWNUM = 1))
    19 WHERE
    20 (-- The company has been updated
    21 company_id IN (
    22 SELECT company_id
    23 FROM t_auth_company auth
    24 WHERE auth.company_name_lco >= sysdate
    25 OR auth.company_id_lco >= sysdate)
    26 OR
    27 ( -- The trumping rule for the attribute has been changed
    28 SELECT MAX(last_changed_on)
    29 FROM t_trumping_rule rl
    30 WHERE rl.attribute_id = 'abc' ) >= sysdate
    31 )
    32 -- The company has been merged
    33 AND 1 < (SELECT COUNT (*)
    34 FROM t_auth_company auth
    35* WHERE auth.company_id = base.company_id)
    SQL> /
    WHERE auth.company_id = base.company_id
    ERROR at line 13:
    ORA-00904: "BASE"."COMPANY_ID": invalid identifier
    Thank You
    Boris

    Thank you for responding. It is syntactically working in the 10.2 database. Please, see this:
    SQL> UPDATE t_company base
    2 SET (company_name, company_name_sid, company_name_lco, canonical_name,
    3 short_name, short_name2) =
    4 (SELECT company_name, source_id, company_name_lco, canonical_name,
    5 short_name, short_name2
    6 FROM t_auth_company comp
    7 WHERE comp.company_id = base.company_id
    8 AND source_id =
    9 (SELECT source_id
    10 FROM (SELECT auth.source_id, trumping_order
    11 FROM t_auth_company auth,
    12 t_trumping_rule rl
    13 WHERE auth.company_id = base.company_id
    14 AND auth.company_name IS NOT NULL
    15 AND rl.source_id = auth.source_id
    16 AND rl.attribute_id = 'abc'
    17 ORDER BY rl.trumping_order)
    18 WHERE ROWNUM = 1))
    19 WHERE
    20 (-- The company has been updated
    21 company_id IN (
    22 SELECT company_id
    23 FROM t_auth_company auth
    24 WHERE auth.company_name_lco >= sysdate
    25 OR auth.company_id_lco >= sysdate)
    26 OR
    27 ( -- The trumping rule for the attribute has been changed
    28 SELECT MAX(last_changed_on)
    29 FROM t_trumping_rule rl
    30 WHERE rl.attribute_id = 'abc' ) >= sysdate
    31 )
    32 -- The company has been merged
    33 AND 1 < (SELECT COUNT (*)
    34 FROM t_auth_company auth
    35 WHERE auth.company_id = base.company_id)
    36 /
    0 rows updated.
    SQL>
    The table structures are as follows:
    CREATE TABLE RTCR_UCDB.T_AUTH_COMPANY
    AUTH_COMPANY_ID NUMBER(22),
    SOURCE_ID NUMBER(3) NOT NULL,
    LD_COMPANY_ID NUMBER(22),
    SOURCE_COMPANY_ID VARCHAR2(150 BYTE),
    MATCH_DECISION NUMBER(1) DEFAULT 0 NOT NULL,
    MATCH_DECISION_LCO DATE DEFAULT sysdate,
    COMPANY_ID NUMBER(22),
    COMPANY_ID_LCO DATE,
    COMPANY_NAME VARCHAR2(150 BYTE),
    COMPANY_NAME_LCO DATE DEFAULT sysdate,
    CANONICAL_NAME VARCHAR2(150 BYTE),
    SHORT_NAME VARCHAR2(150 BYTE),
    SHORT_NAME2 VARCHAR2(150 BYTE),
    URL VARCHAR2(150 BYTE),
    URL_LCO DATE DEFAULT sysdate,
    NURL VARCHAR2(150 BYTE),
    PRIMARY_SIC VARCHAR2(150 BYTE),
    PRIMARY_SIC_LCO DATE DEFAULT sysdate,
    PRIMARY_TICKER VARCHAR2(15 BYTE),
    PRIMARY_TICKER_LCO DATE DEFAULT sysdate,
    EXCHANGE_ID VARCHAR2(60 BYTE),
    EXCHANGE_ID_LCO DATE DEFAULT sysdate,
    NEXCHANGE_ID VARCHAR2(60 BYTE),
    ADDRESS VARCHAR2(150 BYTE),
    ADDRESS_LCO DATE DEFAULT sysdate,
    NADDRESS VARCHAR2(150 BYTE),
    NADDRESS_CONTAINS VARCHAR2(150 BYTE),
    CITY VARCHAR2(150 BYTE),
    CITY_LCO DATE DEFAULT sysdate,
    NCITY VARCHAR2(150 BYTE),
    STATE VARCHAR2(150 BYTE),
    STATE_LCO DATE DEFAULT sysdate,
    NSTATE VARCHAR2(150 BYTE),
    POSTAL_CODE VARCHAR2(15 BYTE),
    POSTAL_CODE_LCO DATE DEFAULT sysdate,
    NPOSTAL_CODE VARCHAR2(15 BYTE),
    COUNTRY_ID VARCHAR2(10 BYTE),
    COUNTRY_ID_LCO DATE DEFAULT sysdate,
    NCOUNTRY_ID VARCHAR2(10 BYTE),
    TELEPHONE VARCHAR2(60 BYTE),
    TELEPHONE_LCO DATE DEFAULT sysdate,
    NPHONE VARCHAR2(60 BYTE),
    PHONE_7D VARCHAR2(60 BYTE),
    PHONE_AREA VARCHAR2(60 BYTE),
    FAX VARCHAR2(60 BYTE),
    FAX_LCO DATE DEFAULT sysdate,
    NFAX VARCHAR2(60 BYTE),
    GW_COMPANY_ID VARCHAR2(150 BYTE),
    GW_COMPANY_ID_LCO DATE DEFAULT sysdate,
    CIK_NUMBER VARCHAR2(150 BYTE),
    CIK_NUMBER_LCO DATE DEFAULT sysdate,
    IRS_EIN VARCHAR2(150 BYTE),
    IRS_EIN_LCO DATE DEFAULT sysdate,
    MIN_DATA_FLAG VARCHAR2(1 BYTE) DEFAULT 'N' NOT NULL,
    OBSOLETE_FLAG VARCHAR2(1 BYTE) DEFAULT 'N' NOT NULL,
    OBSOLETE_FLAG_LCO DATE,
    LAST_CHANGED_BY VARCHAR2(50 BYTE) DEFAULT user NOT NULL,
    LAST_CHANGED_ON DATE DEFAULT sysdate NOT NULL,
    CREATED_ON DATE NOT NULL
    CREATE TABLE RTCR_UCDB.T_TRUMPING_RULE
    SOURCE_ID NUMBER(3) NOT NULL,
    ATTRIBUTE_ID NUMBER(5) NOT NULL,
    TRUMPING_ORDER NUMBER(3),
    LAST_CHANGED_BY VARCHAR2(50 BYTE) DEFAULT USER,
    LAST_CHANGED_ON DATE DEFAULT sysdate
    CREATE TABLE RTCR_UCDB.T_COMPANY
    COMPANY_ID NUMBER(22),
    COMPANY_NAME VARCHAR2(150 BYTE),
    COMPANY_NAME_SID NUMBER(3),
    COMPANY_NAME_LCO DATE,
    CANONICAL_NAME VARCHAR2(150 BYTE),
    SHORT_NAME VARCHAR2(150 BYTE),
    SHORT_NAME2 VARCHAR2(150 BYTE),
    URL VARCHAR2(150 BYTE),
    URL_SID NUMBER(3),
    URL_LCO DATE,
    NURL VARCHAR2(150 BYTE),
    PRIMARY_SIC VARCHAR2(150 BYTE),
    PRIMARY_SIC_SID NUMBER(3),
    PRIMARY_SIC_LCO DATE,
    PRIMARY_TICKER VARCHAR2(15 BYTE),
    PRIMARY_TICKER_SID NUMBER(3),
    PRIMARY_TICKER_LCO DATE,
    EXCHANGE_ID VARCHAR2(60 BYTE),
    EXCHANGE_ID_SID NUMBER(3),
    EXCHANGE_ID_LCO DATE,
    NEXCHANGE_ID VARCHAR2(60 BYTE),
    ADDRESS VARCHAR2(150 BYTE),
    ADDRESS_SID NUMBER(3),
    ADDRESS_LCO DATE,
    NADDRESS VARCHAR2(150 BYTE),
    CITY VARCHAR2(150 BYTE),
    CITY_SID NUMBER(3),
    CITY_LCO DATE,
    NCITY VARCHAR2(150 BYTE),
    STATE VARCHAR2(150 BYTE),
    STATE_SID NUMBER(3),
    STATE_LCO DATE,
    NSTATE VARCHAR2(150 BYTE),
    POSTAL_CODE VARCHAR2(15 BYTE),
    POSTAL_CODE_SID NUMBER(3),
    POSTAL_CODE_LCO DATE,
    NPOSTAL_CODE VARCHAR2(15 BYTE),
    COUNTRY_ID VARCHAR2(10 BYTE),
    COUNTRY_ID_SID NUMBER(3),
    COUNTRY_ID_LCO DATE,
    NCOUNTRY_ID VARCHAR2(10 BYTE),
    TELEPHONE VARCHAR2(60 BYTE),
    TELEPHONE_SID NUMBER(3),
    TELEPHONE_LCO DATE,
    NPHONE VARCHAR2(60 BYTE),
    PHONE_7D VARCHAR2(60 BYTE),
    PHONE_AREA VARCHAR2(60 BYTE),
    FAX VARCHAR2(60 BYTE),
    FAX_SID NUMBER(3),
    FAX_LCO DATE,
    NFAX VARCHAR2(60 BYTE),
    GW_COMPANY_ID VARCHAR2(150 BYTE),
    GW_COMPANY_ID_SID NUMBER(3),
    GW_COMPANY_ID_LCO DATE,
    CIK_NUMBER VARCHAR2(150 BYTE),
    CIK_NUMBER_SID NUMBER(3),
    CIK_NUMBER_LCO DATE,
    IRS_EIN VARCHAR2(150 BYTE),
    IRS_EIN_SID NUMBER(3),
    IRS_EIN_LCO DATE,
    LAST_CHANGED_BY VARCHAR2(50 BYTE) DEFAULT user NOT NULL,
    LAST_CHANGED_ON DATE DEFAULT sysdate NOT NULL,
    CREATED_ON DATE NOT NULL
    )

  • Log error "Could not load file or assembly 'BarcodeConversion' or one of its dependencies. Access is denied. This code work fine in server 2008 but get this error in server 2012

    This code work fine in server 2008, but get this error in server 2012.  Do yo have any idea?

    Need some more info as to where this is installed and how.
    First thing to try would be to uninstall the solution and reinstall.
    Check the GAC for your assembly as well as web.config.
    If you don't see it in one of those places, something went wrong with the install and you'll need to start over.
    Brandon James SharePoint Developer/Administrator

  • At uni i need to run proxy on 'auto detect mode' but then at home/work this mode makes my internet browsing very slow. Can i do something about this without having to change settings everytime i change locations? running V3.6.8 on OSX

    At uni I need to run proxy on 'auto detect mode' but then at home/work this mode makes my internet browsing very slow. Can I do something about this without having to change settings every time I change locations? running V3.6.8 on OSX

    You can look at these extensions:
    *FoxyProxy: https://addons.mozilla.org/firefox/addon/2464
    *QuickProxy: https://addons.mozilla.org/firefox/addon/1557
    *SwitchProxy: https://addons.mozilla.org/firefox/addon/125

  • I can't seem to run my Playlist under Yahoo Music.. it runs fine with IE 9 but not Firefox 4 .... any idea why?

    I can't seem to run my Playlist under Yahoo Music.. it runs fine with IE 9 but not Firefox 4 .... any idea why? I can run a single song just not my playlist.
    Thanks.

    Had this problem for quite a while but found a work-a-round. I click anywhere in the text I want to delete and insert any character. I am then able to block and delete any text I want to. It's been working great.

  • Firefox hangs on opening requiring force quit I have snow leopard mac It hangs when I try safe mode. I need to know how to remove all traces of firefox on my mac so I can reinstall. I have tried terminal as advised on firefox webpage. Please advise m

    Firefox hangs on opening requiring force quit I have snow leopard Mac It even hangs when I try safe mode. I need to know how to remove all traces of firefox on my mac so I can reinstall. I have tried terminal as advised on firefox webpage. Please advise me
    == This happened ==
    Every time Firefox opened
    == I tried to update firefox add-ons ==
    == User Agent ==
    Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7

    Try a new profile. See [[Recovering important data from an old profile]]

  • On MacBook Air not work the Internet from iPad Wi-Fi mode, but work from iPad USB internet mode. Please help me) Thank)

    On MacBook Air not work the Internet from iPad Wi-Fi mode, but work from iPad USB internet mode. Please help me. Thank)))

    The following link has a Wi-Fi troubleshooting section for personal hotspot that may help: iOS: Troubleshooting Personal Hotspot

  • Main viewer mode affects browser mode but cannot be switched in browser mod

    The main viewer modes - specifically Multi and Stack change the selection and navigation operations of browser mode, but cannot be adjusted in browser mode.
    For example, if the main viewer mode is Stack mode, then the stack pick is green, the motion left and right cursors do nothing (beep), and multi-selection is not possible. While this is useful if you want to do stack operations, it's annoying if you don't, and it's not possible to switch to multi-select off without either going to the main viewer and changing it, OR (oddly) double clicking on a non stacked image and that goes to the main viewer AND changes it.
    Ideally you should be able to switch main viewer mode even when you are in browser mode.

    The main viewer modes - specifically Multi and Stack change the selection and navigation operations of browser mode, but cannot be adjusted in browser mode.
    For example, if the main viewer mode is Stack mode, then the stack pick is green, the motion left and right cursors do nothing (beep), and multi-selection is not possible. While this is useful if you want to do stack operations, it's annoying if you don't, and it's not possible to switch to multi-select off without either going to the main viewer and changing it, OR (oddly) double clicking on a non stacked image and that goes to the main viewer AND changes it.
    Ideally you should be able to switch main viewer mode even when you are in browser mode.

  • My microphone won't work when in Speaker mode, but will when in regular mode. What is up with that?

    My iPhone's microphone will not work in the Speaker mode, but will when in Regular mode. The microphone works even when in bluetooth mode. This was sudden and no updates have been made recently, but it is up to date with the software.

    I took it to the apple store and it was determined to be a mechanical problem. Since I had apple care, they replaced the phone.

  • C# SCOM SDK agent install works fine from debug mode but disconnects when built from installer

    My team is writing a C# application that installs SCOM agents on the fly. I used the code in :
    http://msdn.microsoft.com/en-us/library/hh329037.aspx
    as a template. Which works fine and will consistently install agents when I run it in debug from Visual Studio. But when I build an installer (using InstallShield), calls to:
    "AgentTaskResult results = adminServer.InstallAgents(agents, configuration);"
    always result in a Microsoft.EnterpriseManagement.Common.ServerDisconnectedException. The agent install even shows up in pending management on the SCOM server (but this sits in pending management forever and is never processed). Calling managementGroup.Reconnect();
    and retrying the agent install still results in a ServerDisconnectedException. The application has no problem doing other things with the managementGroup object (from debug or running from an installer). It can create MonitorConfigurationOverrides and
    gets events out of an outbound connector. So it seems like the disconnect problem is localized just to agent install requests.
    I looked in the Windows Event Log and found an OpsMgr SDK Service Error: 
    An exception was thrown while processing InstallAgents for session ID uuid:71d39b19-f9a7-4d4a-82ee-5043480af635;id=41.
     Exception message: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 778.
     Full Exception: System.Xml.XmlException: '.', hexadecimal value 0x00, is an invalid character. Line 1, position 778.
       at System.Xml.XmlTextReaderImpl.Throw(Exception e)
       at System.Xml.XmlTextReaderImpl.ParseNumericCharRefInline(Int32 startPos, Boolean expand, StringBuilder internalSubsetBuilder, Int32& charCount, EntityType& entityType)
       at System.Xml.XmlTextReaderImpl.ParseCharRefInline(Int32 startPos, Int32& charCount, EntityType& entityType)
       at System.Xml.XmlTextReaderImpl.ParseText(Int32& startPos, Int32& endPos, Int32& outOrChars)
       at System.Xml.XmlTextReaderImpl.ParseText()
       at System.Xml.XmlTextReaderImpl.ParseElementContent()
       at System.Xml.XmlReader.ReadString()
       at System.Xml.XmlReader.ReadElementString(String name)
       at Microsoft.EnterpriseManagement.RuntimeService.TaskRuntimeService.CreateRemoteJobXml(JobDefinition jobDefinition, ManagementPackTask task, Guid hsId)
       at Microsoft.EnterpriseManagement.RuntimeService.TaskRuntimeService.SubmitJobs(IList`1 jobDefinitions, Guid batchId, JobCategory category)
       at Microsoft.EnterpriseManagement.RuntimeService.TaskRuntimeService.SubmitTasksInternal(IList`1 jobDefinitions, Guid batchId, JobCategory category, PrepareResultSet prepareTaskResultCallback)
       at Microsoft.EnterpriseManagement.ServiceDataLayer.AdministrationService.InstallAgents(Guid batchId, IList`1 jobDefinitions)

    Hello,
    You might ask in the
    Visual C# Language forum on MSDN.
    Otherwise, perhaps the Operations Manager - Extensibility forum:
    http://social.technet.microsoft.com/Forums/systemcenter/en-US/home?forum=operationsmanagerextensibility
    Karl
    When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
    My Blog: Unlock PowerShell
    My Book: Windows PowerShell 2.0 Bible
    My E-mail: -join ('6F6C646B61726C40686F746D61696C2E636F6D'-split'(?&lt;=\G.{2})'|%{if($_){[char][int]&quot;0x$_&quot;}})

  • Unhandled exception when code runs for the first time,but works fine the second

    Hi All,
    I have the following code snippet
    private void RGL_Click(object sender, RibbonControlEventArgs e)
    Word._Document oDoc;
               oDoc = Globals.ThisAddIn.Application.ActiveDocument;
                object start = oDoc.Content.Start;
                object end = oDoc.Content.End;
                oDoc.Range(ref start, ref end).LanguageID = WdLanguageID.wdEnglishCanadian;
                oDoc.Range(ref start, ref end).NoProofing = 0;
    Microsoft.Office.Interop.Word.ReadabilityStatistic DocStats;
                    DocStats = oDoc.ReadabilityStatistics[10];------>exception occurs here when code runs first time
                    MessageBox.Show(DocStats.Name + " " + DocStats.Value);
    When I copy paste a document and click on the button it raises a COM exception but if I click continue and click on the button again, the correct grade level score is displayed.Cant figure out why this is happening.

    Thanks for the answer Eugene, this exception never shows up if I type something and click on the rgl button , but if i open a huge document that is already in Canadian english and click on this ribbon it gives me the following exception
    System.Runtime.InteropServices.COMException was unhandled by user code
      HelpLink=wdmain11.chm#36966
      HResult=-2146824090
      Message=Command failed
      Source=Microsoft Word
      ErrorCode=-2146824090
      StackTrace:
           at Microsoft.Office.Interop.Word.ReadabilityStatistics.get_Item(Object& Index)
           at UsabilityMapping_V01.Ribbon1.RGL_Click(Object sender, RibbonControlEventArgs e) in <my path> 1211
           at Microsoft.Office.Tools.Ribbon.RibbonPropertyStorage.ControlActionRaise(IRibbonControl control)
           at Microsoft.Office.Tools.Ribbon.RibbonPropertyStorage.ButtonClickCallback(RibbonComponentImpl component, Object[] args)
           at Microsoft.Office.Tools.Ribbon.RibbonManagerImpl.Invoke(RibbonComponentCallback callback, Object[] args)
           at Microsoft.Office.Tools.Ribbon.RibbonMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture)
           at Microsoft.Office.Tools.Ribbon.RibbonManagerImpl.System.Reflection.IReflect.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, ParameterModifier[] modifiers, CultureInfo culture, String[]
    namedParameters)
      InnerException: 

  • Why does my program run fine in highlight execution, but not normally?

    When I highlight execution, the program runs fine, but when I run the program normally, nothing happens. (I believe the program is stuck at the initialize cam vi). If someone could help me out, I'd be very thankful
    Attachments:
    intensity10.vi ‏139 KB

    The first troubleshooting technique I did was to add several "waits" throughout the program, particularily with the loops. I learned the problem was actually with the hardware itself and the camera mode. The camera must take an empty frame before it can store the image, thus the for loop needed to be replaced with a while loop.
    However, after fixing the program using boolean logic, 2 of the buttons disappear on my front panel during use (which I will have to further troubleshoot). Thank you!
    Attachments:
    intensity11.vi ‏158 KB

Maybe you are looking for