Bex Query : Very Urgent

HI Experts,
                  In a Bex Query , I have 2 Columns 1) Material , 2) Netprice. Now in the query i need a third column, which shud be derived from the existiing 2 columns,
ex:
Mat no                                       Price
12345                                               100
I need this column
Exact Cost
                                                                     ( IF MatNo is 12345 then 25 * 100,
                                                                                if MatNo is other than 12345 then 50 * 100) .
I need to develop this, how to address this, I want to do this in query level. I have considered the option of writing a routine while data is populated in data target, but that doesnt help, cos later the value can be changed from 25 to 200 etc. Kindly suggest
Regards,
Tarak
Edited by: TARAK on Mar 25, 2008 5:33 PM

Dear ,
Plz check Nag's reply in :
https://forums.sdn.sap.com/click.jspa?searchID=10061863&messageID=3743877
See if you can tweak that logic a little bit to suit you...
Thanks

Similar Messages

Tuning the query : Very Urgent

Hi
We have query wich needs tuning.when we are putting REGULAR EXPRESSION query is running fine but whne we put like LIKE stmt it is taking time.Here is the query below.Please help on tuning.
SELECT a.order_number, b.last_update_date,TO_CHAR( b.split_percent,'FM99999.009') SPLIT_PERCENTAGE,
rs.NAME " SALES_PERSON_NAME ", rs.salesrep_number, b.effective_date,
b.creation_date "CREATION_DATE", rt.NAME "TERRITORY_NAME",
rt.segment1 "ERP_CODE", a.booked_date "DATE_BOOKED",
TO_CHAR(ROUND((( (SELECT SUM (ordered_quantity * unit_selling_price)
FROM apps.oe_order_lines_all ol
WHERE ol.header_id = a.header_id)
* b.split_percent
/ 100
) , 2),'FM99999999999999999999.009') order_total ,
(SELECT user_name
FROM fnd_user
WHERE user_id = b.last_updated_by) requested_by,
b.obsolete_date
FROM oe_order_headers_all a,
apps.csm_header_sales_cr_hist b,
jtf_rs_salesreps rs,
ra_territories rt
WHERE 1 = 1
AND a.header_id = b.source_header_id
AND b.territory_id = rt.territory_id
AND b.salesrep_id = rs.salesrep_id
AND b.source_type = 'O'
AND a.order_number IN (
SELECT a.order_number
FROM oe_order_headers_all a,
apps.csm_header_sales_cr_hist b,
jtf_rs_salesreps rs,
ra_territories rt
WHERE 1 = 1
AND a.header_id = b.source_header_id
AND b.territory_id = rt.territory_id
AND b.salesrep_id = rs.salesrep_id
AND b.source_type = 'O'
-- AND b.obsolete_date IS NULL --ommented by andondap as per TD#9648 Changes
AND REGEXP_LIKE ( rs.name , '(svc)|(Muti.*Y)|(Multi.*Y)|(._MY)') Commented by andondap as per TD#9648 Changes
AND b.last_update_date BETWEEN TO_DATE ('2012/11/25', 'YYYY/MM/DD') AND TO_DATE ('2013/03/23', 'YYYY/MM/DD')+ 0.9999
AND REGEXP_LIKE ( rs.name,'(.MY)|(Muti.*Y))|(Multi.*Y)|(._MY) |(mlti)')
AND rs.name LIKE '%SVC%MULTI%' OR rs.name NOT LIKE '%DUMMY%' OR rs.name LIKE 'Svc%Multi%' OR rs.name LIKE 'Svc%MY%'
OR rs.name LIKE 'Service%Multi%' OR rs.name LIKE '%MY_SHARE_TM' OR rs.name LIKE '%MY_SHARE_T')
ORDER BY a.order_number, b.creation_date
Thanks
Hibin

Hmmm, let's see...
1. OP provided formatted code using {noformat}{noformat} tags.... - FAILED
2. OP provided database version in full... - FAILED
3. OP provided table structures and index information... - FAILED
4. OP provided cardinality and selectivity information... - FAILED
5. OP provided explain plans... - FAILED
6. OP provided execution traces... - FAILED
7. OP is a new member and can be excused for above failures... - FAILED
8. OP has asked previous questions and followed forum etiquette by marking them as answered... - FAILED
9. OP has respected volunteers and other questioners by not marking his question as Urgent... - FAILED
10. OP has read the forum FAQ ({message:id=9360002}) for posting his question... - FAILED
11. OP has read the forum FAQ ({message:id=9360003}) for posting a tuning question... - FAILED
It's a good job you're not a computer program, you wouldn't have even compiled.
so, points to note:
This is a forum of volunteers. There's no such thing as an Urgent question here, and it's considered rude to suggest your question is urgent, as that indicates you want immediate attention from the people who are giving up their own time to help, and who have their own jobs to do. It's also rude for the other people who are asking questions, as everyone would like an answer to their problem as soon as possible, so what makes you any more special? An urgent issue is one where a live system is down potentially putting people's lives at risk or causing a company to lose money, or somehow damage their services. Such issues should be logged with Oracle Support, not on the free OTN forums.
Next, when you post your question, ensure you provide all the information that is needed for people to be able to help you. Read the FAQ posts which point to useful threads indicating what information is required, especially for tuning requests.
Finally, when your questions have been answered, it is common courtesy to mark them as answered (and award points if appropriate), otherwise it indicates that you have no respect for the people who are helping you.
If you follow all the advice above, you will end up creating a good question that people will be willing to help you with. If you don't follow the advice above, such as in this question you've posted, you will find that few experts will bother to help (or if they post it will not likely be helpful advise you receive). The choice is yours.

Filter in Bex Reports - Very Urgent, Please help!

Hi,
I have a report based on CRM transaction which has both header row and item row, the report also has filters like status and product, the status is the header level and product is at the item level, in which case the header row would not have the product details and item row would not have the Status Details. the records would be something like shown below
Transaction Number       Status         Product
1111111                        Open
1111111                                          Product1
In which case the filter applied on status and product would not return the expected result for ex if filter "Status = Open" is specified then we would just get only the header row and if Filter "Product = Product1" is specified we would just get the detail row, if both the filters are applied we would not get any rows.
Is there any way to get both the header and item row if filters are specified, how such cases are implemented in Bex reports.
Thanks
Akila.R

Akila,
please state your query result properly...
Transaction Number Status Product
1111111 Open
1111111 Product1
would look like
Transaction Number | Status | Product
11111111 | Open | #
11111111 | # | Product 1
22222222 | Closed | #
22222222 | # | Product 2
The issue being that you want say... Open transactions then the the result should be
Transaction Number | Status | Product
11111111 | Open | #
11111111 | # | Product 1
whereas you are getting
Transaction Number | Status | Product
11111111 | Open | #
and similarly for Product column as well....
Options :
1. It could be possible that your model is wrong -
2. Have the filter include # as well.... include # into the filter by default - ask the users to do the same
Arun
Hope it helps...

BW statistics cube and query Very Urgent!!

Hi Everyone,
I want to find out the query performance of all our customized infocubes in the bw system.
But I am not able to find our infocubes in 0BWTC_C02, 0BWTC_C03 etc. even in the queries 0BWTC_C10_Q014, 0BWTC_C10_Q507 I cannot find out queries which were created for our customized i.e Zinfocubes.
What could be the problem?
Is some installation missing or do we have to update. How can I find out this information.
Its really urgents can anyone please let me know.
Thanks,
Prashant.

Hi,
I requested the delta update as you have specified. But it is still in yellow and I get these messages.
Request still running
Diagnosis
No errors could be found. The current process has probably not finished yet.
System response
The ALE inbox of the SAP BW is identical to the ALE outbox of the source system
and/or
the maximum wait time for this request has not yet run out
and/or
the batch job in the source system has not yet ended.
Current status
The processing of the data was not finished.

Transfer (IDocs and TRFC): Errors occurred
Data Package 1 : arrived in BW ; Processing : Data packet not yet processed
Processing (data packet): Errors occurred
Data Package 1 ( 7917 Records ) : Missing messages
Update ( 0 new / 0 changed ) : Missing messages
Processing end : Missing messages

These are the messages when i press the details button in the monitor window.
What could be the problem.
Can anyone please help with this.
Thanks,
Prashant.

Transport failing for BEX query? URGENT

Hi All
When i am transporting query, i am getting below error. I have made the errors in BOLD. Please help me out. How to find that missing element. I already retransported this query 2 times and getting same error.
 Execution of programs after import (XPRA)
 Transport request : SCDK900909
 System : SCQ
 tp path : tp
 Version and release: 371.02.23 700
 Post-import methods for change/transport request: SCDK900909
 on the application server: sapapqas01
 Post-import method RS_AFTER_IMPORT started for ELEM L, date and time: 20070823152931
 Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
 Error when activating element D1ITRZCYGUMFZ44QD3JFETS84
 Element D1DXYOIH9OVW7HRNDJCPF3NS4 is missing in version M Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
 Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L RS_AFTER_IMPORT belongs to package RS
 The errors affect the following components:
 BW-WHM (Warehouse Management) Post-import method RS_AFTER_IMPORT completed for ELEM L, date and time: 20070823152931
 Post-import methods of change/transport request SCDK900909 completed
 Start of subsequent processing ... 20070823152931
 End of subsequent processing... 20070823152931
 Execute reports for change/transport request: SCDK900909
 on the application server: sapapqas01
 Reports for change/transport request SCDK900909 have been executed
 Start of................ 20070823152931
 End of.................. 20070823152931
 Execution of programs after import (XPRA)
 End date and time : 20070823152931
 Ended with return code: ===> 8 <=== ######################################

Hi
I have a doubt. This query is in favourites in DEV system and from there i am transporting. Do i need to assign to an infoarea or role?

Please find this query very urgent

Query-->select value from mytable where value is not null
union all
select value from mytable where value is null
Ex: table name::mytable
In this table i have one column called 'value' and this column values shold be like this
12
null
13
null
11
null
....i executed above query the result will be like this
12
13
11
null
null
null
the above query executes on the table it's effect only one column result
but i need multiple columns to be effected same as above one only....Anyone please help me on it and give the query.

I have a table..MyTable(value number(10))
select * from Mytable;value
12
null
13
null
11
null
This is the table i have and the records i have...... and i need output like this
value
12
13
11
null
null
null ..............>ike this i need output for this i use this query i.e
Query-->select value from mytable where value is not null
union all
select value from mytable where value is null
------------>and this query gives only one column result i need multiple results like below: i have table with 2 columns like below
MyTable2(value1 number(10),value2 number(10))
select * fromMyTable2value1 value2
111 null
null 201
112 null
null 200
110 null
this is the table i have......... and i need output like below
value1 value2
111 201
112 200
110 null
null null
null null
NOTE:: If we use ORDER BY table records order must change, i don't want to change any order....please what is the query for that

Idoc query(very urgent)

Hi Folks,
i want to insert a record into the EDIDD table ,please let me know if i need to modify the sequence numbering which is kept by the fields SEGNUM and PSGNUM for the records whcih are beneath the new insert record.
regards,
Nagaraj

Hello
Yes, fields SEGNUM is a secuential number.
The other one im not sure but try to assign the same value for both fields.
Gabriel

Screen query (very urgent)

Hi,
I have a requirement to hide the selection screen inside of that program in which the selection screen is defined. It is to be done instead of calling or submitting this program into any other program. Even if we use the At Selection-screen output then only we can hide the parameters or select-options but the screen remains. my requirement is to hide the entire screen? is it possible? Please reply

I don't think it is possible hide the standard selection screen.
But you can achieve this by declaring user defined selection screen.
ex:
selection-screen: begin of screen 100.
selection-screen: end of screen 100.
The above screen will be displayed only if it is called in the program using the statement
call selection-screen 100.
If it is not called then it will not be displayed.

BEx problem - very urgent

Hello Guys,
I have variance calcuating field in my report.
the field is used to calculate the diff between amount for 2 years.
VAR = NDIVO ( (Current Year-Last year)/Last year))
But when i run the report, the Variance field has 'X'. instead of 0 or some value,
could you explain this issue.
thanks,
BI Consultant - GADE

Hello Guys,
Thanks for your reply.
But I have used nodim(formula).
Buts its the same problem.
I don;t have any last year data , but i have current years data.
so have used NOERR(FORMULA), and then used NODIM on that.
thanks,
BI CONSULTANT - GADE

SQL SELECT Query Help ..Please its very Urgent!!

Hi All,
I am having Oracle Database whice is storing 1000's of records daily.
I need to select some information based on date and time.
I am having two coloumns for Date and time. The first column(testDate) of type Date stores date as MM/DD/YY format and the second column(testTime)of type Numeric stores the time in seconds.
The Example data is :
testDate ------=-- testTime
11/12/2002 --- 35000
11/12/2002 --- 43000
11/12/2002 --- 45000
11/12/2002 --- 75000
11/13/2002 --- 2000
11/13/2002 --- 3500
11/13/2002 --- 4300
11/13/2002 --- 9800
11/13/2002 --- 23000
11/14/2002 --- 5000
11/14/2002 --- 10000
11/14/2002 --- 15000
How can i write a SELECT Query to get the records of specific date and seconds to next day specific date and seconds.I mean i want all the records between 11/12/2002 --- 43000 seconds to 11/14/2002 --- 1000 seconds.
If any one helps me in this regard iam very thank full to them.Its very urgent for me.
Thanks

Hi m7nra,
I used the query as
SELECT * FROM table
WHERE testDate + (testTime/(24*60*60)) BETWEEN TO_DATE('MM/DD/YYYY','12.11.2002') AND TO_DATE('MM/DD/YYYY','14.11.2002')
its giving DATE FORMAT NOT RECOGNIZED error.
The Example data is :
testDate ------=-- testTime
11/12/2002 --- 35000
11/12/2002 --- 43000
11/12/2002 --- 45000
11/12/2002 --- 75000
11/13/2002 --- 2000
11/13/2002 --- 3500
11/13/2002 --- 4300
11/13/2002 --- 9800
11/13/2002 --- 23000
11/14/2002 --- 5000
11/14/2002 --- 10000
11/14/2002 --- 15000
infact i need all the records between 11/12/2002 --- 43000 seconds to 11/14/2002 --- 1000 seconds.
Please help me to find a full query beacuse iam very new to Oracle.
Thanks,
S R Mannava

Very Urgent Help , ABAP SQL Query

Guys,
Please suggest.I have a table(custom_table1) with a field say A which is of date type = c and length = 9. And i want to query this table.Following is the query.
Select substr(A,0,5) B C into itab From table custom_table1
where b = ( select b from cusstom_table2 )
and substr(A,0,5) = Input_A.
That is i want to equate an Input_A (which is of 5 character length) with field A (only first 5 character of the 9 length). But it seems the query is wrong. Kindly help ,very urgent
Thanks

Thanks guys, U have helped me to fill up the where condition as
but what about the column A in the select query ?I need only 5 characters from the field populated into Itab.
CONCATENATE srch_str '%' INTO srch_str. -- bcos i want it to be 'InputA%'
Select Substr(A,0,5) , B C Into Itab From CustomTable 1 where B = (Select B from customtable2) and A Like SrchStr
Is there any means i can populate only the 5 characters from the select field A into Itab without using Substr (becos it doesnt work) ? Please help.

Query Tuning-very Urgent

Beloq query is taking time to execute and cost is 934.
The db in which it is run has lesser volume of data compared to that of prod.
There is a full table scan on psd
inspite of a pk present on table psd columns (psd_id,psd_serial_no)
also a pk present on table ltc_iss_rec columns(ltc_iss_rec_id,psd_serial_num)
Pl help to optimize the query.
select a.psd_id,a.psd_serial_no,a.sys_id,a.cosmos_ref_no,a.src_sys_asgn_ref_no,
a.bank_id,b.lc_expr_dt
from psd a,ltc_iss_rec b
where ((b.ltc_iss_rec_id >= 'T200203140731163') and (b.ltc_iss_rec_id <= 'T200606224485207'))
and a.psd_id = b.ltc_iss_rec_id
and a.psd_serial_no = b.psd_serial_num
and a.psd_typ_cod = 'ISS'
and b.lc_expr_dt <= '13-Mar-07'
and a.psd_serial_no =
select nvl(max(link_psd_ser_no),'000') from psd_link c,psd_lcs d
where c.psd_id = d.psd_id
and c.psd_serial_no = d.psd_serial_num
and c.link_psd_id = a.psd_id
and c.link_psd_id >= 'T200203140731163' and c.link_psd_id <= 'T200606224485207'
and d.update_serial_num = (
select max(update_serial_num) from psd_lcs e
where e.psd_id = d.psd_id
order by a.psd_id
Explain plan for the query :
Operation Object Name Rows Bytes Cost Object Node In/Out PStart PStop
SELECT STATEMENT Optimizer Mode=CHOOSE 1 934
SORT ORDER BY 1 96 900
FILTER
NESTED LOOPS 1 96 898
PARTITION RANGE ALL 1 2
TABLE ACCESS FULL IWH_OWNER.PSD 61 4 K 837 1 2
TABLE ACCESS BY GLOBAL INDEX ROWID IWH_OWNER.LTC_ISS_REC 1 26 1 1 1
INDEX UNIQUE SCAN IWH_OWNER.XPKLTC_ISS_REC 1
SORT AGGREGATE 1 112
HASH JOIN 1 112 34
TABLE ACCESS BY GLOBAL INDEX ROWID IWH_OWNER.PSD_LCS 1 40 2 ROWID ROW L
NESTED LOOPS 1 82 5
TABLE ACCESS BY GLOBAL INDEX ROWID IWH_OWNER.PSD_LINK 1 42 3 ROWID ROW L
INDEX RANGE SCAN IWH_OWNER.XIE1PSD_LINK 1 2
INDEX RANGE SCAN IWH_OWNER.XIE1PSD_LCS 2 1
VIEW SYS.VW_SQ_1 134 K 3 M 26
SORT GROUP BY 134 K 4 M 26
INDEX FULL SCAN IWH_OWNER.XIE1PSD_LCS 217 K 7 M 26

Read this link.
When your query takes too long ...
If you really need help from any of the forum members then you should avoid using the word "urgent" and give more useful information (check the above link what I meant by useful information) rather than simply saying it's very urgent please help me. It's of no use to anybody.
Regards
Raj

Query Issue(Very Urgent)

Hi,
 I have issue with select statement to pull the records from two tables. Here I have two tables one is with Billing Document Items and Service Order Operations.
I have service order as unique field in both tables, When I execute select statement with one service order I got 10 records like
S Ord Oper Billing Document Items
Oper Repair Code Item Oper Repair Code
10 AD01 1 10 AD01
20 AD01 2 20 AD01
30 OT01 3 10 AD01
40 RE01 4 20 AD01
50 RP01 5 20 AD01
 6 20 AD01
 7 30 OT01
 8 40 RE01
 9 50 RP01
 10 50 RP01
 This are the records with same Service order number, and my select statement giving data like
O/P
Service Order = 60001212
OPER ITEM REPAIR TYPE
10 1 AD01
20 1 AD01
10 2 AD01
20 2 AD01
10 3 AD01
20 3 AD01
10 4 AD01
20 4 AD01
10 5 AD01
20 5 AD01
10 6 AD01
20 6 AD01
30 7 OT01
40 8 RE01
50 9 RP01
50 10 RP01
But I need output like this
Item Oper Rep Code
1 10 AD01
2 20 AD01
3 10 AD01
4 20 AD01
5 20 AD01
6 20 AD01
7 30 AD01
8 40 RE01
9 50 RP01
10 50 RP01
 Please give me the select statement which gives the above output. I need very urgent please....
Thanks
Robbie

hi robert,
The ouput u want is just a little away from the one u r actually getting. it is the two fields OPER and ITEM interchangeably..
U just have to use GROUP BY ITEM..........if u want the desired output with ITEM as first field.
<group-by-clause> → GROUP BY [<column-ref>,*]<column-ref>
if it helps please reward points.
thanks

Bex Query Filter Page in BSP - Urgent Please...

I have seen many threads about Bex query in BSP, but can any one tell me how can i display the default Bex Query Filter page in BSP.
I created a query in Bex Query Designer and added few filters and when i execute i get a popup where i can enter the input values for which the report would be generated, can i get the same functionality or similar functionality if i have the same Bex query in BSP.
Also apart from the filters specified in the Bex, all the columns displayed in the report appears in the filter section how can get the same functionality BSP.
Note: I do not want to use Bex Web Application Designer
Please tell me the steps for the same.
Atleast please give me the steps at a high level. Please...

Hi,
1. Create a CKF, inside the CKF window create a new Formula Variable --> Right click in left side window on var and say create new Variable
2. Create new variable of replacement path type and reference Characteristic as the TO DATE value which you want to be max.
3. Now drag this new created var to CKF and save.
4. Now create condition with follwoing deatils:
Key Figure Operator Value
Max Date(CKF) TOP N 1
Save and execute your query. This will give you max value for the To Date field.
Hope it works .
Regards
Raj Rai

Urgent: Bex query

Transported Bex query, now when execute this query it gives message that Initial RANGE-LOW for customer exit variable ABC corrected to #.
Any suggestions to fix this.
Points will be assigned.
Thanks
MK

Hi
I suggest you to transport the query newly
The reason is some query related modifications done in customer exit..or variable might not have captured properly
So transport them along with the query and error will not occur
Assign points if useful
Thanks
N Ganesh

Bex Query : Very Urgent

Similar Messages

Maybe you are looking for