Bex Report issue - transaction data of type Char not dispalyed complete

Hi BI Expers ,
I have one issue related to Bex reports here
I have complete data loaded in DSO , there is one field Job Title which is having a length of 60 char . When I am executing the report in Bex Analyzer , the value for Job Title is getting truncated after 30 characters . Although full 60 chararacters are loaded in DSO  still I am not able to present them in reports .
Can some one help here ,  whether this is Analyzer limitation or is there some setting to fix this issue .
Regards
Anurag

Hi Anurag,
Check the Output length of the object that is giving out put as 30 charecters.
And check in Business Explorer tab option for BEx Description short, medium or High.
Hope this helps.
Veerendra.

Similar Messages

  • Power view couldn't load the model or data source because the data source type is not supported

    Hi,
    I have SQL 2012 standard edition in my local. I have developed SSAS & deployed in local. I have been asked to develop power view report in excel 2013 using this SSAS. But when I tried to do in Excel 2013 professional Plus, I am getting below error:
    Power view couldn't load the model or data source because the data source type is not supported.
    Does power view is supported in standard edition of SQL or it requires Business/Enterprise edition of SQL server?
    Thanks in advance

    What type of SSAS install are you using?
    PowerView in Excel 2013 currently only supports Tabular data sources.
    Only PowerView in Sharepoint 2013 supports both Tabular and Multi-Dim data sources. (provided you have the required Sharepoint and SQL updates installed)
    http://darren.gosbell.com - please mark correct answers

  • My iMessage and Facetime won't activate, says waiting for activation. All photos and contacts are restored, using email and wifi only, no service. Only issue is date and time will not automatically set.

    My iMessage and Facetime won't activate, says waiting for activation. All photos and contacts are restored, using email and wifi only, no service. Only issue is date and time will not automatically set.

    Howdy eewebe13,
    So you have no cellular service but are on Wi-Fi yet iMessage and Facetime are waiting for activation.
    Please step through this article for that scenario.
    If you get an error when trying to activate iMessage or FaceTime - Apple Support
    Thank you for visiting Apple Support Communities.
    Nubz

  • Bex reporting issue

    Hi gurus
    I m facing a typical error in Bex Reporting. This report displays the details of consumer address details. The data is successfully browsed from data tgt browser in ODS.while creating the reporting and query it gives me these 3 errors.
    Note: Z_CRDAT is key fig of date type / ZADD_ODS is the ODS .
    1. Error in SQL Statement: SAPSQL_FIELDLIST_SUM_TYPE /BIC/Z_CRDAT
    2. System error in program SAPLRSDRC and form RSDRC / FORM DATA_GET_ODS      
        Message no. BRAIN299                                                  
    Diagnosis                                                            
    This internal error is a targeted termination since the program has an incorrect status.                                                     
    Procedure                                                                 
    Analyse the situation and inform SAP.                                 
    3. System error: RSDRC / FORM DATA_GET_ODS ERROR IN RSDRO_READ_ODS_DATA ZADD_ODS 99       
    Message no. DBMAN100                                            
    Diagnosis                                                                               
    A system error with the following parameters has occurred in the data
    Manager:                                                                               
    Parameter 1 = &v1&                                                                               
    Parameter 2 = &v2&                                                                               
    Parameter 3 = &v3&                                                                               
    Parameter 4 = &v4&

    hi gurus
    can any body suggest me anything against this error .
    gaurav

  • Restricting characteristics in report issue based on movement type

    Hi
    I have a requirement to create a report on movement that will include the userID behind the movement.
    In the report, when we drill down to calender day we get userID on days that there is no movement. and we would like to display the useID that there is movement.
    the datasource is 2LIS_03_BF and KF is 0TOTALSTCK ( inflows of receipts and outflow of issues)
    Report sample
    Calenderday username Movement type     0Totalstck Issue         Receipts
    10.6.2009      XMEN     101     0          
    11.6.2009     XMEN     101     0          
    12.6.2009     XMEN     101     0          
    13.6.2009     XMEN     101     0          
    14.6.2009     XMEN     101     4     0     4
    We want to display this row in the report since this  has movement activity
    14.6.2009     XMEN     101     4     0     4
    is this possible to achieve and how do I resolve it.
    thanks

    Hi,
    I did it this way
    - created a new formula Keyfigure and ( 'ISSTOTSTCK ' OR '0RECTOTSTCK') and set the aggregation as total and 0calday as reference characteristics.
    - next I created condition and added condition type Formular NOT EQUAL TO 0 and set the conditon as active
    - under characteristics tab  I set it as ' Most detailed char along the rows.*
    I have checked the query and only the rows that has 1  in the formula are displayed. I haven't seen any inconsitensies so far.
    reason of using OR instead of AND is because in some calenday they could either be issue or receive.
    thanks alot for the brilliant idea.
    Edited by: Bhat Vaidya on Jul 10, 2009 1:26 PM

  • BEx report issue on setting offset value

    Friends,
    I have got a Bex reporting requirement as follows.
    Given a Calendar week I have to show data for 5 Key figures for the next 3 calendar weeks.  For ex: if I enter 05/2006 I have to show data for 05/2006, 06/2006 and 07/2006. 
    I thoght of using the Off Set parameter for all the Key figures, and for testing I did for 2nd set of Key figures with off set (1)..but these key figures are not showing any data.. Is it I am missing anything here ??
    Please comment if you have any better thoght of doing this..
    Thanks
    Mavi

    Hi,
      The format of period you gave refers to month i believe. If it is right, check the offsets once again. If the user enters fiscal year period, it should be converted in to week period using an customer exit variable(if you don,t have 0CALWEEK) and set offsets.
    Check this link, you may get some idea from that.
    Re: Aging Report

  • AR aging report--from transaction date

    Hi
    Presently the 7/4 bucket aging report shows current and invoices no of days past due i.e. 31 days due past due date.
    Is there a report or any way by which this aging report can be generated to show aging from transaction date.
    Thanks
    Ninad

    Hi ninad
    Aging Reports by default are generated based on Transaction date only and not based on GL Date. Please explain your requirement clearly
    Regards
    Sivakumar

  • Copying transaction data between planning version - Not delete existing dat

    Hello all.
    I made copy from one version, like 000.
    The result is Version A1 and A2. I copied everything(Master Data and Transaction Data).
    For each version, i ran a MRP. But in differents periods. Like October and November.
    After MRP, i have a lot Planning Orders in A1 and A2. But in differents months.
    My question is: I want to merge A1 and A2 in another version(Merge only  Planning Orders). How i can do this?
    Using /SAPAPO/MVM or /SAPAPO/VERCOP i can copy all data from source to target. But always delete previous data.
    Thanks
    Best Regards.
    Marcelo

    This isn't the answer you WANT to hear.   But there's no way to my knowledge to achieve your requirement using standard version copy functionality in APO.
    One way to preserve the data for alternate / merged versions that I've found useful is to use the /SAPAPO/REL_TO_OLTP transaction to send volume data to the ECC client.  If you are loading both inactive versions to BW, then you should be able to release that data from BW to ECC inactive/"long-term" simulation versions where it can be aggregated.  That is to say, you could send A1 and A2 separately and they will simply add to one another, not overwrites (delete and re-create).
    This being said, requirements using this transaction are sent as planned ind. requirements in ECC.  This may not be the desired outcome that you're looking for, so you might have to be careful which key figure you send to represent volumes.

  • Bex report issue - no applicable data found when we drill down on free char

    Hi All,
    We are facing some strange issue  with one of the report.
    when user run the report for a week  (02/02/2009  - 02/08/2009) and then drill down on particular char  its working fine (first time).after that when he is trying to change and execute the report for other week on the same instence ( 02/09/2008 - 02/15/2009) by clicking on refresh and passing new values to the variable  its showing up correctly at the time of drill down on free char its showing as *no applicable data found.*
    when he logoff the system completey and run the report for the week( 02/09/2008 - 02/15/2009) values it is showing up with values even tough he drill down on free char.
    issue basically when he was trying to drill on free char by chaging different date values  in the same instance by clicking on refreh and by entering diffrent values  its showing up as not applicable data found.
    but when he enters the values for different weeks  each time by closing the system and relogin report is working fine and showing up data eventough he drill down on free char.
    Please help me out!

    Dear
    Please check if any condition or exception you have created for that query.
    Or still problem exists check SP level.
    Regds,
    Sachin J

  • Problem in Bex report Status of Data based on multiprovider

    Hi Bi Expert,
    I am facing probelm in my bex reprot having field "Status of data"
    Report is based on multiprovider which using 3 cubes.
    Out of this three cube report showing data with cube havnig oldest date data load.
    How can I get latest one request data into my report .
    I am not using bex web template so dont give solution related to it already gone through that thread.
    using bw 3.5 version

    Hi again,
    in the table RSICCONT you find which request is in which data target. When you define the user exit variable on 0REQID, you have to go in this table and read the request with cubes names in your multi provider. In a second step you sort the request after cubes and time tamp and take the first n (depending on how many cubes you have in MP). Keep in mind: when you apply READ statement, read after Cube name
    Regards
    Aban

  • Bex-report issue

    Hi
    I created a query in Bex-Query Designer - 3.5.. Then publish that report in the Web by using Bex-Analyzer.
    Suppose i have columns in the report like 'vendor' and 'PO Number'. When the cursor goes to 'vendor' column heading then im getting as <b>"Context Menu for vendor"</b> by default.
    i dont want by default .. I want to make this by custome (like i want Vendor Analysis) . How can i get this
    please let me know
    kumar

    Hi ravi
    Yaa im asking same thing. When i put cursor on the 'vendor' or 'PO number' then im getting "Context Menu for vendor " or "Context Menu for PO Number" by default.
    I dont want this one. I want custom one like "vendor Analysis" or "PO Analysis".
    How can i get this one . pls let me knpw
    i ll assing the points
    kumar

  • Broadcasting BEx report using custom date

    Hello All,
    Presently we are broadcasting reports where for every period change we are manually changing the period and broadcasting it.
    Eg: P1 starts from 13th Jan, 2014, ends on 10th Feb, 2014 and P2 starts from 11th Feb, 2014, ends on 12th March, 2014.
    So, when P1 ends we are manually changing the period value to P2 and broadcasting it.
    Is there a way by which we can automate the process where at every period change the period value will get changed and the report will get broadcasted without any manuall intervention. I heard that it is possible to do it using a custom table where the period start and end date will be maintained and trigger the broadcast through process chain.
    Can you please help me out with it?
    Thanks,
    Mirza

    Yes it is very much possible.The broadcasting settings which you create gets stored in the table
    RSRD_SETT_NODE_A
    You should create one test broadcast setting by giving proper technical name through RSRT and then check if you can find the same in the mentioned table or not.
    If you have the entry there then you can update the table based on your logic through custom program.
    For more information on the same refer the below document.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20d671c6-b377-2d10-7488-b75841c389a3?QuickLink=index&…
    Regards,
    AL

  • BI 7 Bex Report issue with GUI 730

    Hi Team
    We recently upgrade SAP Gui from 720 to 730 and after when I try to open Workbook which is in XLSM format.
    System pop-up for repair workbook.
    If I do repair existing format are not available. 
    Please help me how to recover report formats which we set in 720.
    Regards
    Rajesh SVN

    Hi Arvind
    Thanks for your swift reponse and suggestion.
    In our scenario we have workbook which having few formats which are deleted after repair.
    Which should not be.  How can recover those formats in the report and screen print attached for refernce.
    Regards
    Rajesh SVN

  • Regarding BEx Report issue

    Hi experts,
    I have the report requirement like below.
    I have the formula variables like Flow1,Flow2 etc upto Flow10.All these are characteristics.
    my report output looks like below.
                       Jan      Feb    March  April    May  -
    Upto Dec
    Flow1          10     
    Flow2          20         Like this all the months
    Flow3          15
    I need to count the certain key figure value ( for example count of FMR value ) corresponding to each flow entered in the selection screen for each month.
    can any body pls help me to achieve this functionality.
    Thanks in advance.
    Raj.

    Hi
    Go for Properties of Particular object there you find the normalization option, you find the Count ...
    Jagan

  • BEx Broadbasting:  Online links for object type WB not defined

    I got this over in the Portal Content Development forum but figured it would get more views here:
    I'm trying to broadcast an online link to the portal for a workbook. I can publish it as a MS Excel file but I get the following whenever I try to Broadcast to portal as a "online link to current data".
    "Online links for the specified object type WB are not defined"
    I've been beating my head against it for several hours and know the help.sap.com links to broadcasting by heart. Anyone have any clues as to what I missed?

    Hi,
    Check the transaction RSPOR_CUST01. I guess you are using BEx 7 in which case integration with the portal is a must. Check whether the settings have been maintained in the above said transaction.Let us know.
    Regards,
    Sree.

Maybe you are looking for