BI Admin Tool and XSLT transformation for XML data source - How it works ?

Hello,
There is a possibility to import data from XML data source using BI Admin Tool.
In the import window we can point XSLT file. What is the purpose of that XSLT field?
Why I am asking ?
I thought it is smth like XSLT processor, but simply it doesnt work.
What I did:
- I pointed XML data source file
- I pointed XSLT transformation file
- Click OK, and still get the message that the XML file structure is not supported
After that I transformed that XML file with some desktop XSLT processor using the same XSLT file, and I tried to connect that file directly using BI Admin tool.Then it works. So it means that the transformation is ok.
So basically one question comes to my mind in that situation:
What is the purpose of XSLT field in BI Admin Tool when it comes to XML data source ?
(it doesnt look like XSLT processor)
Greetings
/Michal

Hi Mariano
Why you need to use XSLT for transforming XML file into ABAP table
Code is a part of some ABAP report. Looks like it is reading a file from file system and updating table after transformation
If you have requirement like you need to read XML file and then insert the data into a SAP table
You can use
File to RFC
File to Proxy scenario using SAP PI.
Please provide more inputs on requirement to help
Thanks
Gaurav

Similar Messages

XSLT transformation for XML to ABAP internal table

Hi, can anyone please tell me how it should be the xslt tranformation to conver this xml
<Embargos_ARBA_DOC>
     <ns:Embargos_ARBA_MT
          xmlns:ns="un:swissmedical:sap:proxy:embargos_arba:file">
          <Embargos_ARBA_MT>
               <FECHA>20081101</FECHA>
               <CUIT>50000002124</CUIT>
               <MONTO>0000013794090</MONTO>
               <RAZON_SOCIAL>RAUL ARMANDO CUNQUEIRO S.A.C.I.</RAZON_SOCIAL>
          </Embargos_ARBA_MT>
          <Embargos_ARBA_MT>
               <FECHA>20081101</FECHA>
               <CUIT>55000001456</CUIT>
               <MONTO>0000001144410</MONTO>
               <RAZON_SOCIAL>PARODI ESTEBAN ARMANDO</RAZON_SOCIAL>
          </Embargos_ARBA_MT>
     </ns:Embargos_ARBA_MT>
</Embargos_ARBA_DOC>
to this abap Table....
DATA: BEGIN OF i_embargos_arba_doc occurs 0,
          fecha TYPE d,
          cuit TYPE char11,
          monto TYPE char13,
          razon_social(120),
        END OF i_embargos_arba_mt.
so i can transform it with this sentence
      CALL TRANSFORMATION ('embargos_transformation')
        SOURCE XML source
        RESULT Embargos_ARBA_DOC = embargos.
pls i need help because i am unable to create this xslt transformation...
I will give the highest rewards points to the one who can help me.
thanks!
mariano

Hi Mariano
Why you need to use XSLT for transforming XML file into ABAP table
Code is a part of some ABAP report. Looks like it is reading a file from file system and updating table after transformation
If you have requirement like you need to read XML file and then insert the data into a SAP table
You can use
File to RFC
File to Proxy scenario using SAP PI.
Please provide more inputs on requirement to help
Thanks
Gaurav

How to specify inclusion and exclusion rules for File data sources

This is the seed URL for a file data source: file://localhost/c:/myDir/
I want to exclude indexing and searching of files under: file://localhost/c:/myDir/obsolete/
What is the exact format for the exclusion URL?
I have tried both file://localhost/c:/myDir/obsolete/ and /myDir/obsolete/
but neither of it seems to work; it still indexes everything under /myDir/
Should I just put: /obsolete/ as the exclusion URL?
Also after initial crawling, if I change the inclusion and or exclusion rules and then run the crawler again, it should update the indexes accordingly. Is that right?
The version of UltraSearch I am using is 1.0.3.
Thanks for any help on this.

Try "/c:/myDir/obsolete/"
Changing inclusion/exclusion rule does not affect files already crawled. It onyl
affects next crawling behavior.
To do any DML to existing data set, use SQL directly on wk$url table under the instance owner.

How to clear cache for XML data source?

Hi All,
I'm facing a problem loading XML data into Oracle using Oracle Data Integrator. The problem is ODI will cache the data of the XML file at the first time loading the data. And afterwards, when the XML file changed, ODI will load data from the cache.
I did serveral testing on this. If I run the interface in local agent of the designer, I must restart the designer to clear the cache. If I run the interface in an agent, I must restart the agent to clear the cache.
Below is my configuration:
ODI version: 10.1.3.5.0
The technology of the source: XML.
JDBC driver: com.sunopsis.jdbc.driver.xml.SnpsXmlDriver
Does anybody know how to clear the cache of the agent or XML?
Thanks.

Hi ,
Use drop_on_disc or dod in your JDBC URL .
example ,
jdbc:snps:xml?f=C:\mutation.xml&d=C:\mutation.xsd&lf=C:\mutation.log&ro=true&dod=yes
The dod (drop_on_disc) drop automatically the schema when closing the JDBC connection.
dod option must be the last option of the URL.
This option removes the reference to the schema from the driver, and if the schema is store in memory, it also drops the schema. If the schema is stored in an external database (set via db_props), the driver tries to drop the database schema.
Thanks,
Sutirtha

DbConnectionAttributes for XML data source

Post Author: zmtun
CA Forum: .NET
I use XML document which includes both Schema and data. I'd like to get DbConnectionAttributes to set to the crystal report's ConnectionInfo property. Thanks.

Just so I know, you are aware that xml files you are loading
into flash are relative to the html page that is serving up the
flash movie and not the swf file? Just want to be sure. If the xml
file is 2 levels below your html page the path would be
/folder/folder/myfile.xml or something like that.

Logon failed when connecting to XML data source over HTTP

I am trying to create a report using the standard report creation wizard:
1) new, standard report
2) create new connection
3) xml and web services
4) xml data source
When using the sample from the SAP site, it works fine:
http://resources.businessobjects.com/support/downloads/samples/cr/customer_db/customer.xml
I have an HTTP source that generates XML. I have a schema that describes this XML. If I save the XML to a local file it works fine as a data source with the schema. However, when I try to access the same data via HTTP, I get the following error:
Logon failed.
Details: Cannot open file
Server returned HTTP response code: 401 for URL: http://localhost:8004/report.xqy?Validate%20XML=0&Use%20WS-Security%20Config%20File=&WS-Security%20File%20Location
However, if I enter that URL in a browser it works fine. And even if I disable security on the HTTP source, it produces the same error.
Does the URL for the HTTP data source have to conform to some specific pattern? For example, must the URL end in .xml?
Kelly

Sorry Brian,
This is a public forum, if no one can help you do have the option to purchase a support case:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551
Thank you
Don

"logon failed" error when connecting to XML data source

I have an HTTP source that generates XML. I have a schema that describes this XML. If I save the XML to a local file it works fine as a data source with the schema. However, when I try to access the same data via HTTP, I get the following error:
Logon failed.
Details: Cannot open file
Server returned HTTP response code: 401 for URL: http://localhost:8004/report.xqy?Validate%20XML=0&Use%20WS-Security%20Config%20File=&WS-Security%20File%20Location
However, if I enter that URL in a browser it works fine. And even if I disable security on the HTTP source, it produces the same error.
I have tried a local HTTP source as well as the same source running on Amazon EC2.
Any ideas?

Thanks for the help.
I am new to crystal reports, so I do not understand your suggestion. Both of those points look like they are related to Adobe Flash.
I am trying to create a report using the standard report creation wizard:
1) new, standard report
2) create new connection
3) xml and web services
4) xml data source
When using the sample from the SAP site, it works fine:
http://resources.businessobjects.com/support/downloads/samples/cr/customer_db/customer.xml
When connecting to my source from a browser, it works fine. When using my source as a local document instead of over http it works fine. It is only when connecting to my source over http that I get the failed logon error.
Kelly

How to model a XML Data Source

Hi Experts,
I have to model a XML Data Source. Usually I have to load texts and attributes separately (for 'normal' data sources). But I have only one xml file. Should I design one 'big' data source and accordingly one 'big' info package for all the xml data? Or should I create several data sources for one xml file?
Best Regards,
Denise

hi Denise,
as far as i know,
the function xml datasource is generated after we assign infosource with 'flat file' source system, so if you do it from infosource of master data, then you may need separately as 'normal' datasources. if you want to go with the 'big' and 'big' (datasource/infosource and infopackage), then you can create a 'big' infosource with transfer structure fields sequence same as xml structure, and set the master data characteristics to be update as 'infoprovider' (rsa1->infoproviders->choose infoarea and right click 'insert characteristic as infoprovider', then create update rules for these characteristics and assign it with 'big' infosource.
doc how to send xml if you haven't look
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9f7f8f95-0501-0010-f5ba-f19167ef74c4
hope this helps.

XML Data Sources

i was trying to run an initialisation load for 0material
from an xml data source (6A* ) , however i got an error message
saying that only a delta load can be run for xml data sources.
why is that so ? can someone pls explain to me.

today i tried the:
xfa.host.importData("./data.xml", false);
i get a "general exception" at this point, which tells me that the number of arguments is wrong. If i leave out the second argument (the "false" one), i get a "NotAllowedError" exception, which tells me that security preferences deny my attempt to use that function. Where can i configure this or what am i doing wrong?
(because this one is developing away from my original problem, i opened another thread ( http://forums.adobe.com/thread/514822 ) which describes my original issue more in detail)

How to enable the Delta for the data source 0CO_OM_OPA_7

Hi Experts,
I have a business content data source 0CO_OM_OPA_7 and I need to activate and enable Delta for this data source.
This data source is activated (but not delta enabled) and used for full load in my system for the past three year. As this is a full load this data source is carrying more than 4 million records every day with adding 2 millions records every year. The load takes every day 4 to 5 hours for completion.
Now I need to enable the delta for this data source. To enable the delta for this data source I used the transaction RSA5 and clicked on the 'Activate DataSources' but the data source is not enabled the 'Delta'
I have also checked in the RSA6 transaction, the check box for 'Delta' is not checked for this data source.
Can anybody help in enabling the 'Delta' for this data source.
Thanks in Advance
Narendra

Hi,
DS "0CO_OM_OPA_7" won't support deltas, so load to ODS then to Cube. Else delete the overlaping request then load this you can set in InfoPackage level.
You check any Period/Month fields in 0CO_OM_OPA_7 then write simple routine in Infopackage and the set the overlaping deletion.
Use the followng code and change it for your requirement in Infopackage level.
I'm using 0CO_PC_01 DataSource, so it won't have delta so I'm using the following code in InfoPackageag and set delete overlaping req. So eveyday it will delete the old req for that period and then it will load data againg for that period (Full loads).
DATA: l_idx LIKE sy-tabix,
        zzdate LIKE sy-datum,
        zzbuper LIKE t009b-poper,
        zzbdatj LIKE t009b-bdatj,
        zzperiod(7) TYPE c.
READ TABLE l_t_range WITH KEY
       fieldname = 'FISCPER'.
l_idx = sy-tabix.
zzdate = sy-datum - 1.
CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
    EXPORTING
      i_date               = zzdate
*             I_MONMIT             = 00
      i_periv              = 'V3'
           IMPORTING
     e_buper              = zzbuper
     e_gjahr              = zzbdatj.
*           EXCEPTIONS
*             INPUT_FALSE          = 1
*             T009_NOTFOUND        = 2
*             T009B_NOTFOUND       = 3
*             OTHERS               = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CONCATENATE zzbdatj zzbuper INTO zzperiod.
l_t_range-low = zzperiod.
l_t_range-option = 'EQ'.
l_t_range-sign = 'I'.
MODIFY l_t_range INDEX l_idx.
Thanks
Reddy

[svn] 3663: Dita xml and xslt support for SkinStates

Revision: 3663
Author: [email protected]
Date: 2008-10-15 13:04:27 -0700 (Wed, 15 Oct 2008)
Log Message:
Dita xml and xslt support for SkinStates
Bugs: SDK-17166
QA: Yes
Doc: No
Tests: checkintests
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-17166
Modified Paths:
flex/sdk/trunk/asdoc/templates/class-parts.xslt
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/asdoc/TopLevelClassesGenerator.ja va

http://docs.oracle.com/javaee/1.4/tutorial/doc/JAXPXSLT6.html

XSLT samples for XML- ABAP mapping

Hi all,
Does anyone have a XSLT samples for XML->ABAP mapping ?
regards

first create XSLT program by copy pasting the below given code and give the program name as "Y_TEST"
<b>XSLT code</b>
<xsl:stylesheet xmlns:xsl="http://www.w3.org/1999/XSL/Transform" version="1.0">
<xsl:strip-space elements="*"/>
<xsl:output indent="yes"/>
<xsl:template match="NewDataSet">
    <asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
      <asx:values>
        <OUTTAB>
          <xsl:for-each select="Table">
            <OUTTAB1>
              <AIRPORTCODE>
                <xsl:value-of select="AirportCode"/>
              </AIRPORTCODE>
              <CITYOFAIRPORTNAME>
                <xsl:value-of select="CityOrAirportName"/>
              </CITYOFAIRPORTNAME>
              <COUNTRY>
                <xsl:value-of select="Country"/>
              </COUNTRY>
              <COUNTRYABBRIVATION>
                <xsl:value-of select="CountryAbbrviation"/>
              </COUNTRYABBRIVATION>
              <COUNTRYCODE>
                <xsl:value-of select="CountryCode"/>
              </COUNTRYCODE>
              <GMTOFFSET>
                <xsl:value-of select="GMTOffset"/>
              </GMTOFFSET>
              <RUNWAYLENGTHFEET>
                <xsl:value-of select="RunwayLengthFeet"/>
              </RUNWAYLENGTHFEET>
              <RUNWAYELEVATIONFEET>
                <xsl:value-of select="RunwayElevationFeet"/>
              </RUNWAYELEVATIONFEET>
              <LATITUDEDEGREE>
                <xsl:value-of select="LatitudeDegree"/>
              </LATITUDEDEGREE>
              <LATITUDEMINUTE>
                <xsl:value-of select="LatitudeMinute"/>
              </LATITUDEMINUTE>
              <LATITUDESECOND>
                <xsl:value-of select="LatitudeSecond"/>
              </LATITUDESECOND>
              <LATITUDENPEERS>
                <xsl:value-of select="LatitudeNpeerS"/>
              </LATITUDENPEERS>
              <LONGITUDEDEGREE>
                <xsl:value-of select="LongitudeDegree"/>
              </LONGITUDEDEGREE>
              <LONGITUDEMINUTE>
                <xsl:value-of select="LongitudeMinute"/>
              </LONGITUDEMINUTE>
              <LONGITUDESECONDS>
                <xsl:value-of select="LongitudeSeconds"/>
              </LONGITUDESECONDS>
              <LONGITUDEEPERW>
                <xsl:value-of select="LongitudeEperW"/>
              </LONGITUDEEPERW>
            </OUTTAB1>
          </xsl:for-each>
        </OUTTAB>
      </asx:values>
    </asx:abap>
</xsl:template>
</xsl:stylesheet>
<b>just create a type 1 program and paste the below given code.</b>
report y_consume_webservice .
data: wf_user type string .
data: wf_password type string .
types: begin of outtab1 ,
   airportcode(6) ,
   cityofairportname(50),
   country(30) ,
   countryabbrivation(10),
   countrycode(6) ,
   gmtoffset(10) ,
   runwaylengthfeet(15),
   runwayelevationfeet(15),
   latitudedegree(10) ,
   latitudeminute(10) ,
   latitudesecond(10) ,
   latitudenpeers(10) ,
   longitudedegree(10) ,
   longitudeminute(10) ,
   longitudeseconds(10) ,
   longitudeeperw(10) ,
   end of outtab1 .
data: outtab type table of outtab1.
data: wf_o like line of outtab .
data: g_okcode like sy-ucomm .
data: my_container   type ref to cl_gui_custom_container .
data: g_dock type ref to cl_gui_docking_container .
data: mygrid type ref to cl_gui_alv_grid .
data: wf_field_cat type lvc_t_fcat .
data: wf_field_cat_wa like line of wf_field_cat ,
      wf_is_layout type lvc_s_layo .
data: wf_fld_cat type slis_t_fieldcat_alv .
data: wf_fld_cat_wa like line of wf_fld_cat .
data: wf_repid like sy-repid .
data: int_tab_name type slis_tabname .
data: xslt_err type ref to cx_xslt_exception .
constants:
* encoding for download of XML files
encoding     type string value 'utf-8' .
data: rlength type i,
      txlen type string .
data: http_client type ref to if_http_client .
data: wf_string type string .
data: wf_string1 type string .
data: wf_proxy type string ,
      wf_port type string .
selection-screen: begin of block a with frame .
parameters: uri2(132) type c lower case .
selection-screen skip 1.
parameters: user(50) lower case,
            password(50) lower case ,
            p_proxy(100) lower case default 'proxy.xxx.com' ,
            p_port(4) default '80'.
selection-screen: end of block a .
at selection-screen output.
loop at screen.
    if screen-name = 'PASSWORD'.
      screen-invisible = '1'.
      modify screen.
    endif.
endloop.
start-of-selection .
clear wf_string .
concatenate
'<?xml version="1.0" encoding="utf-8"?>'
'<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">'
'<soap:Body>'
'<GetAirportInformationByCountry xmlns="http://www.webserviceX.NET">'
'<country>' uri2 '</country>'
'</GetAirportInformationByCountry>'
'</soap:Body>'
'</soap:Envelope>'
into wf_string .
clear :rlength , txlen .
rlength = strlen( wf_string ) .
move: rlength to txlen .
clear: wf_proxy, wf_port .
move: p_proxy to wf_proxy ,
      p_port to wf_port .
call method cl_http_client=>create
exporting
    host          = 'www.webservicex.net'
    service       = '80'
    scheme        = '1'
    proxy_host    = wf_proxy
    proxy_service = wf_port
importing
    client        = http_client.
http_client->propertytype_logon_popup = http_client->co_disabled.
wf_user = user .
wf_password = password .
call method http_client->authenticate
exporting
    proxy_authentication = 'X'
    username             = wf_user
    password             = wf_password.
call method http_client->request->set_header_field
exporting
    name = '~request_method'
    value = 'POST'.
call method http_client->request->set_header_field
exporting
    name = '~server_protocol'
    value = 'HTTP/1.1'.
call method http_client->request->set_header_field
exporting
    name = '~request_uri'
    value = '/airport.asmx'.
call method http_client->request->set_header_field
exporting
    name = 'Content-Type'
    value = 'text/xml; charset=utf-8'.
call method http_client->request->set_header_field
exporting
    name = 'Content-Length'
    value = txlen.
call method http_client->request->set_header_field
exporting
    name = 'SOAPAction'
    value = 'http://www.webserviceX.NET/GetAirportInformationByCountry'.
call method http_client->request->set_cdata
exporting
    data   = wf_string
    offset = 0
    length = rlength.
call method http_client->send
exceptions
    http_communication_failure = 1
    http_invalid_state         = 2.
call method http_client->receive
exceptions
    http_communication_failure = 1
    http_invalid_state         = 2
    http_processing_failed     = 3.
clear wf_string1 .
wf_string1 = http_client->response->get_cdata( ).
replace all occurrences of
    '<' in wf_string1 with '<' .
replace all occurrences of
'>' in wf_string1 with '>' .
replace all occurrences of
'xmlns=' in wf_string1 with 'xmlns:xsl=' .
try .
    call transformation (`Y_TEST`)
            source xml wf_string1
            result     outtab = outtab.
catch cx_xslt_exception into xslt_err.
    data: s type string.
    s = xslt_err->get_text( ).
    write: ': ', s.
    stop.
endtry .
break-point .
Try this and give me your feedback.
Regards
Raja

XSLT transformation for deep structure .....

Hello,
I am trying to do an XSLT transformation for a deep structure HAP_S_PDF_DOCUMENT (see it in SE11), I have managed to achieve this. but not with perfection. i still get some redundant data and data have been experiencing Data duplication. I was hoping if you people point out the what is wrong in the transfromation. The data repeats for every once under node DATA and then under node of the refered structure name. Besides it also create a blank row even if the record is 0. I am mostly facing problem with nodes T_ELEMENTS. T_COL_CELL and T_FIELD. These are the nested structures, Can anybody help / guide me to achieve these transforamtion?
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:sap="http://www.sap.com/sapxsl" version="1.0">
<xsl:strip-space elements="*"/>
<xsl:template match="HAP_DOCUMENT">
<xsl:element name="HAP_DOCUMENT" namespace="">
<xsl:apply-templates select="MAIN_HEADER"/>
<xsl:apply-templates select="T_ELEMENTS"/>
<xsl:apply-templates select="T_STAT_CHG_BUTTONS"/>
<xsl:apply-templates select="S_APPRAISAL_ID"/>
<xsl:apply-templates select="S_HEADER"/>
<xsl:apply-templates select="POSITIONS"/>
<xsl:element name="STAT_CHG_BUTTON">
<xsl:value-of select="../STAT_CHG_BUTTON"/>
</xsl:element>
<xsl:element name="OFFLINE_ID">
<xsl:value-of select="OFFLINE_ID"/>
</xsl:element>
<xsl:element name="BSP_FLAG">
<xsl:value-of select="BSP_FLAG"/>
</xsl:element>
<xsl:element name="ROLE">
<xsl:value-of select="ROLE"/>
</xsl:element>
<xsl:element name="APPRAISAL_YEAR">
<xsl:value-of select="APPRAISAL_YEAR"/>
</xsl:element>
</xsl:element>
</xsl:template>
<xsl:template match="MAIN_HEADER">
<xsl:element name="MAIN_HEADER">
<xsl:for-each select="ZBGAPR_FORM_HEADER">
<xsl:element name="DATA">
<xsl:copy-of select="child::node()"/>
</xsl:element>
</xsl:for-each>
</xsl:element>
</xsl:template>
<xsl:template match="T_ELEMENTS">
<xsl:element name="T_ELEMENTS">
<xsl:for-each select="ZHAP_S_PDF_ELEMENTS">
<xsl:element name="DATA">
<xsl:apply-templates select="T_COL_CELL"/>
<xsl:copy-of select="child::node()"/>
</xsl:element>
</xsl:for-each>
</xsl:element>
</xsl:template>
<xsl:template match="T_COL_CELL">
<xsl:element name="T_COL_CELL">
<xsl:for-each select="ZHAP_S_PDF_COL_CELL">
<xsl:element name="DATA">
<xsl:apply-templates select="T_FIELD"/>
<xsl:copy-of select="child::node()"/>
</xsl:element>
</xsl:for-each>
</xsl:element>
</xsl:template>
<xsl:template match="T_FIELD">
<xsl:element name="T_FIELD">
<xsl:for-each select="ZHAP_S_PDF_FIELD">
<xsl:element name="DATA">
<xsl:apply-templates select="T_VAL_VALUES"/>
<xsl:apply-templates select="T_VAL_RANGES"/>
<xsl:copy-of select="child::node()"/>
</xsl:element>
</xsl:for-each>
</xsl:element>
</xsl:template>
<xsl:template match="T_VAL_VALUES">
<xsl:element name="T_VAL_VALUES">
<xsl:for-each select="HAP_S_BODY_CELL_VAL_VALUES">
<xsl:element name="DATA">
<xsl:copy-of select="child::node()"/>
</xsl:element>
</xsl:for-each>
</xsl:element>
</xsl:template>
<xsl:template match="T_VAL_RANGES">
<xsl:element name="T_VAL_RANGES">
<xsl:for-each select="HAP_S_BODY_CELL_VAL_RANGES">
<xsl:element name="DATA">
<xsl:copy-of select="child::node()"/>
</xsl:element>
</xsl:for-each>
</xsl:element>
</xsl:template>
<xsl:template match="T_STAT_CHG_BUTTONS">
<xsl:element name="T_STAT_CHG_BUTTONS">
<xsl:for-each select="HAP_S_BODY_CELL_VAL_RANGES">
<xsl:element name="DATA">
<xsl:copy-of select="child::node()"/>
</xsl:element>
</xsl:for-each>
</xsl:element>
</xsl:template>
<xsl:template match="S_APPRAISAL_ID">
<xsl:element name="S_APPRAISAL_ID">
<xsl:copy-of select="node()"/>
</xsl:element>
</xsl:template>
<xsl:template match="S_HEADER">
<xsl:element name="S_HEADER">
<xsl:apply-templates select="S_TEXTS"/>
<xsl:apply-templates select="T_APPRAISER"/>
<xsl:apply-templates select="T_APPRAISEE"/>
<xsl:apply-templates select="T_PART_APPRAISER"/>
<xsl:apply-templates select="T_OTHERS"/>
<xsl:apply-templates select="S_STATUS"/>
<xsl:apply-templates select="S_DATES"/>
<xsl:apply-templates select="S_DISPLAY"/>
</xsl:element>
</xsl:template>
<xsl:template match="POSITIONS">
<xsl:element name="POSITION">
<xsl:for-each select="ZBGHR_APR_POSITION_DET">
<xsl:element name="DATA">
<xsl:copy-of select="child::node()"/>
</xsl:element>
</xsl:for-each>
</xsl:element>
</xsl:template>
<xsl:template match="S_TEXTS">
<xsl:element name="S_TEXTS">
<xsl:copy-of select="node()"/>
</xsl:element>
</xsl:template>
<xsl:template match="T_APPRAISER">
<xsl:element name="T_APPRAISER">
<xsl:for-each select="HAP_S_PDF_APPRAISER">
<xsl:element name="DATA">
<xsl:copy-of select="child::node()"/>
</xsl:element>
</xsl:for-each>
</xsl:element>
</xsl:template>
<xsl:template match="T_APPRAISEE">
<xsl:element name="T_APPRAISEE">
<xsl:for-each select="HAP_S_PDF_APPRAISEE">
<xsl:element name="DATA">
<xsl:copy-of select="child::node()"/>
</xsl:element>
</xsl:for-each>
</xsl:element>
</xsl:template>
<xsl:template match="T_OTHERS">
<xsl:element name="T_OTHERS">
<xsl:for-each select="HAP_S_PDF_OTHERS">
<xsl:element name="DATA">
<xsl:copy-of select="child::node()"/>
</xsl:element>
</xsl:for-each>
</xsl:element>
</xsl:template>
<xsl:template match="T_PART_APPRAISER">
<xsl:element name="T_PART_APPRAISER">
<xsl:for-each select="HAP_S_PDF_PART_APPRAISERS">
<xsl:element name="DATA">
<xsl:copy-of select="child::node()"/>
</xsl:element>
</xsl:for-each>
</xsl:element>
</xsl:template>
<xsl:template match="T_PART_APPRAISER">
<xsl:element name="T_PART_APPRAISER">
<xsl:for-each select="HAP_S_PDF_PART_APPRAISERS">
<xsl:element name="DATA">
<xsl:copy-of select="child::node()"/>
</xsl:element>
</xsl:for-each>
</xsl:element>
</xsl:template>
<xsl:template match="S_STATUS">
<xsl:element name="S_STATUS">
<xsl:copy-of select="node()"/>
</xsl:element>
</xsl:template>
<xsl:template match="S_DATES">
<xsl:element name="S_DATES">
<xsl:copy-of select="node()"/>
</xsl:element>
</xsl:template>
<xsl:template match="S_DISPLAY">
<xsl:element name="S_DISPLAY">
<xsl:copy-of select="node()"/>
</xsl:element>
</xsl:template>
<xsl:template match="STAT_CHG_BUTTON">
</xsl:template>
<xsl:template match="OFFLINE_ID">
</xsl:template>
<xsl:template match="BSP_FLAG">
</xsl:template>
<xsl:template match="ROLE">
</xsl:template>
<xsl:template match="APPRAISAL_YEAR">
</xsl:template>
</xsl:transform>
Regards,
Shishir.P

"XSLT transformation for a deep structure"
which way abap to xml or xml to abap?
you may want to check this thread
Re: Problem converting XML back to structure using XSLT

How do I change the size of the tools and the text for the menus in Photoshop? I need a magnifying glass in order to make out what they are.

How do I change the size of the tools and the text for the menus in Photoshop? I need a magnifying glass in order to make out what they are.

Okay, I've figured it out, so I'm going to answer my own question in hopes that it may help anyone else that would like to actually be able to see what they're doing when using Photoshop CC 2014 on a high resolution screen.
1. Open Photoshop.
2. Select Preferences from the Edit Menu, then select General.
3. Change the HUD Color Picker to Hue Strip (Medium).
4. Select Interface from the Preferences menu on the left side of the dialog box.
5. Change the UI Font Size to Large in the Text area of the Preferences dialog box.
6. Select Experimental Features from the Preferences menu on the left side of the dialog box.
7. Select Scale UI 200% for high-density displays (Windows only).
8. Click on OK, then Exit/Quit Photoshop.
9. Open Photoshop and everything should be readable.

VMware tools and hardware version for Cisco vWLC

I am currently running a Cisco vWLC (v8.0.100.0) on VMware vSphere 5.5U2 supporting about 20 APs. I just recently upgraded to vSphere 5.5U2 and I was working my way through updating the VMware tools and VM Versions on all my VMs when I glanced at this info for the vWLC. The vWLC shows a VM version of 1 with the VMware tools not running and not installed. I am curious if it is necessary or even possible to update the VMware tools and VM version for the vWLC. The vWLC is working perfectly fine and I have no issue with leaving well enough alone, but this just kind of peeked my curiosity as I really couldn't find any concrete answers in any online documentation. Does anyone have any insight on this matter?

If it's working, then leave it alone. Some of the Cisco virtual, well maybe most, don't support the VMWARE tools. Updating the version to the latest will make you have to use vCenter as the sphere client will not allow you to edit the VM anymore.
-Scott

BI Admin Tool and XSLT transformation for XML data source - How it works ?

Similar Messages

Maybe you are looking for