How to specify inclusion and exclusion rules for File data sources

This is the seed URL for a file data source: file://localhost/c:/myDir/
I want to exclude indexing and searching of files under: file://localhost/c:/myDir/obsolete/
What is the exact format for the exclusion URL?
I have tried both file://localhost/c:/myDir/obsolete/ and /myDir/obsolete/
but neither of it seems to work; it still indexes everything under /myDir/
Should I just put: /obsolete/ as the exclusion URL?
Also after initial crawling, if I change the inclusion and or exclusion rules and then run the crawler again, it should update the indexes accordingly. Is that right?
The version of UltraSearch I am using is 1.0.3.
Thanks for any help on this.

Try "/c:/myDir/obsolete/"
Changing inclusion/exclusion rule does not affect files already crawled. It onyl
affects next crawling behavior.
To do any DML to existing data set, use SQL directly on wk$url table under the instance owner.

Similar Messages

How to calculates averages and send to a file?(source code)

how to calculates averages and send to a file?(source code) I need to get started but I don't know where to begin...........the book I have doesn't really say how to handle averages and send to a file.................anybody got suggestions on how to get started? I am a newbie so place in layman's terms.............thanx

To calculate an average: add all of the numbers together and divide by how many numbers you added together.
ex: (1 + 2 + 3 + 10)/4 = 4 (4 is the average)
As for writing them to a file, look over the API for random or sequential access files.

BI Admin Tool and XSLT transformation for XML data source - How it works ?

Hello,
There is a possibility to import data from XML data source using BI Admin Tool.
In the import window we can point XSLT file. What is the purpose of that XSLT field?
Why I am asking ?
I thought it is smth like XSLT processor, but simply it doesnt work.
What I did:
- I pointed XML data source file
- I pointed XSLT transformation file
- Click OK, and still get the message that the XML file structure is not supported
After that I transformed that XML file with some desktop XSLT processor using the same XSLT file, and I tried to connect that file directly using BI Admin tool.Then it works. So it means that the transformation is ok.
So basically one question comes to my mind in that situation:
What is the purpose of XSLT field in BI Admin Tool when it comes to XML data source ?
(it doesnt look like XSLT processor)
Greetings
/Michal

Hi Mariano
Why you need to use XSLT for transforming XML file into ABAP table
Code is a part of some ABAP report. Looks like it is reading a file from file system and updating table after transformation
If you have requirement like you need to read XML file and then insert the data into a SAP table
You can use
File to RFC
File to Proxy scenario using SAP PI.
Please provide more inputs on requirement to help
Thanks
Gaurav

How to calculate averages and send to a file?(source code)

Having trouble the book isn't very clear on how to use averages.............could some give me an example of a program..................that gets averages and send to a file..........?

From Deitel and Deitels monster 'How to Program' :
import javax.swing.JOptionPane;
public class Average {
public static void main ( String args[] )
int total, gradeCounter, gradeValue, average;
Swing grade;
total = 0;
gradeCounter = 1;
while ( gradeCounter <= 10 ) { //assuming 10 values
grade = JOption.showInputDialog ( "Enter grade: " ) ;
gradeValue = Integer.parseInt ( grade );
total += gradeValue;
gradeCounter = gradeCounter + 1;
average = total / 10;
JOptionPane.showMessageDialog (
null, "Class Average is" + average, "Class Average",
JOptionPane.INFORMATIOIN_MESSAGE );
System.exit ( 0 );
Import package java.io
Three stream objects are created when you execute , System.in, System.out, System.err
System.out can be directed to send it's output to a file or disk.

How to enable the Delta for the data source 0CO_OM_OPA_7

Hi Experts,
I have a business content data source 0CO_OM_OPA_7 and I need to activate and enable Delta for this data source.
This data source is activated (but not delta enabled) and used for full load in my system for the past three year. As this is a full load this data source is carrying more than 4 million records every day with adding 2 millions records every year. The load takes every day 4 to 5 hours for completion.
Now I need to enable the delta for this data source. To enable the delta for this data source I used the transaction RSA5 and clicked on the 'Activate DataSources' but the data source is not enabled the 'Delta'
I have also checked in the RSA6 transaction, the check box for 'Delta' is not checked for this data source.
Can anybody help in enabling the 'Delta' for this data source.
Thanks in Advance
Narendra

Hi,
DS "0CO_OM_OPA_7" won't support deltas, so load to ODS then to Cube. Else delete the overlaping request then load this you can set in InfoPackage level.
You check any Period/Month fields in 0CO_OM_OPA_7 then write simple routine in Infopackage and the set the overlaping deletion.
Use the followng code and change it for your requirement in Infopackage level.
I'm using 0CO_PC_01 DataSource, so it won't have delta so I'm using the following code in InfoPackageag and set delete overlaping req. So eveyday it will delete the old req for that period and then it will load data againg for that period (Full loads).
DATA: l_idx LIKE sy-tabix,
 zzdate LIKE sy-datum,
 zzbuper LIKE t009b-poper,
 zzbdatj LIKE t009b-bdatj,
 zzperiod(7) TYPE c.
READ TABLE l_t_range WITH KEY
 fieldname = 'FISCPER'.
l_idx = sy-tabix.
zzdate = sy-datum - 1.
CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
 EXPORTING
 i_date = zzdate
* I_MONMIT = 00
 i_periv = 'V3'
 IMPORTING
 e_buper = zzbuper
 e_gjahr = zzbdatj.
* EXCEPTIONS
* INPUT_FALSE = 1
* T009_NOTFOUND = 2
* T009B_NOTFOUND = 3
* OTHERS = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CONCATENATE zzbdatj zzbuper INTO zzperiod.
l_t_range-low = zzperiod.
l_t_range-option = 'EQ'.
l_t_range-sign = 'I'.
MODIFY l_t_range INDEX l_idx.
Thanks
Reddy

Error in Asset Accounting Specify Intervals and Postings Rules

Hi,
I am configuring for Asset Accounting and when I go to this part:
Asset Accounting > Integration with the General Ledger > Post Depreciation to the General Ledger > Specify Intervals and Postings Rules
I get the error "Company code XXXX is not defined" (message no. AC519).
The company code specified in the error was deleted in the system before. I am thinking that there is a table where this company code is not yet deleted. How can I solve this? Thanks a lot.

Create the company again, make your changes and delete the company again

How can I activate the transfer rules for the ODS updating a data target.

We are on BW 3.5 and I'm loading data into the 0FIGL_O10 ODS and then uploading the data into the cube 0FIGL_C10. The data loads just fine to the ODS but when I try to 'update the data target' I get a date & time stamp' error on the info-package transfer rules.
I then Replicate the datasource 80FIGL_O01.
I must then 'activate' the transfer rules.
However I cannot get the transfer rules for 80FIGL_O10 in CHANGE MODE to activate them.
How can I activate the transfer rules for the ODS updating a data target.
The error text is as follows:
DataSource 80FIGL_O10 has to be replicated (time stamp, see long text)
Message no. R3016
Diagnosis
DataSource 80FIGL_O10 does not have the same status as the source system in the Business Information Warehouse.
The time stamp in the source system is 02/15/2007 10:42:33.
The time stamp in the BW system is 11/07/2006 13:11:54.
System response
The load process has been terminated.
Procedure
Copy the DataSource again and then activate the transfer rules that belong to it. You have to activate the transfer rules in every case, even if they are still active after the DataSource has been copied.
Thanks for your assistance.
Denny

Hi Dennis,
Try, using Business Content to activate your data source
hope this will help you
How activate business content?
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a66d5e07211d2acb80000e829fbfe/frameset.htm

Inclusive and Exclusive Free Goods

Hello Folks,
I wish to get confirmation on the following understanding:
1. Free goods must be of the same material for Inclusive bonus quantity method.
2. For Exclusive method it can be either same or different material. Or must it be different material only?
3. In both inclusive and exclusive, free goods is shown as a separate item entry with the item category TANN, for example.
Cheers
John

Hi John,
Please note as given below :
1. Free goods must be of the same material for Inclusive bonus quantity method : It is not mandatory , we can use same material or different material .
2. For Exclusive method it can be either same or different material. Or must it be different material only?: we can use same material or different material .
3. In both inclusive and exclusive, free goods is shown as a separate item entry with the item category TANN, for example.: Yes , The item category will be TANN . with 100% discount.
Thanks and regards
Veera

How to set the default settment rule for the same kind project.

hi experts:
the project of the same kind of the project profile have the same settment rule to one account (G/L).
how to set the default settment rule for the project of this kind of the project profile.
regards

Hi,
You need to define the settlement profile and allocation structure.
next you need to define the Strategy for settlement rule.
navigation-PS> costs> automatic and periodic allocations> settlement> Settlement rule for WBS
--> Define strategy for settlement rule.
Select the strategy and click on settings. in that new entries, check the Acc Assg element, enter Settlement profile and mention accass category as reposnsible cost center.
Save this transaction.
Now create a project assgin responsible costcenter for the WBS element in the project buider and save the transaction.
Now run CJB2 transaction for the project, settlement rule will generated automatically.
even you can configure the same for profitability segment.
Rgds
Sudhir Reddy

How do you set up nested rules for iTunes smart playlist

How do you set up nested rules for a iTune smart playlist

Hello \"alice\",
It sounds like you want to add additional criteria to your Smart Playlists. I found an article with steps you can use to refine your Smart Playlist. Step 2 specifically has what I think you are looking for:
2. To have iTunes add songs that match specific criteria, make sure to select "Match the following rule," then make your selections from the pop-up menus.
For example, you might want iTunes to only add songs that are by a particular artist, or songs with at least a four-star rating.
To add additional matching criteria, click the Add button.
You can find the full article here:
iTunes: How to create a Smart Playlist
http://support.apple.com/kb/ht1801
The article says it is archived. In the current version of iTunes, in step 1 you will select File>New>Smart Playlist. Also, if you need to edit an existing Smart Playlist, you can right click (or hold command while you click) on it and select Edit Smart Playlist.
Thank you for using Apple Support Communities.
Best,
Sheila M.

? how to add page numbers in pages 5.2, starting with 2. Pages '09 had an option to not show folio on page one. Also any how to do left and right folios for a Tabloid? Many trhanks

? how to add page numbers in pages 5.2, starting with page 2. Pages '09 had an option to not show folio on page one. Also any idea how to do left and right folios for a Tabloid? Many thanks . . .

Hello jacquemac,
Your first question:
There might be a better way of achieving what you wish to do, but following these steps could help you out.
You might want to blend in Thumbnails and Invisibles either with (cmd+shift+i and cmd+alt+p) or over the View section in the Menubar.
1. go for Documents (right end of the Toolbar) -> Section
2. place your cursor at the very top of your second page and click "Create new Section->Starting with this page" in the side bar on your right.
(what you are actually doing next is setting the pagenumbers for each section you created. You can see your sections in the Thumbnail view.)
3. click on your first page (the first and only page of your first section) and mark the checkbox "Hide on first page of section"
4. click on your second page (the first page of your second section) and "Insert page number" -> start at 1
Your second question:
Im not quite sure i understand what exactly you want to do here. One page, two columns, each column with another page number? As far as i know this is not possible.
greetings jl

How to set upper and lower limit for service notification in SPRO

Hello everyone,
Good morning....!!
I am new to SAP PM and to SCN as well.
I have a question on Service notification user status.
I have notification profile configured in SAP as below:
Status no      Status          Short text              Lower limit          Upper limit
5                  REGD          Registered                1                          70
10                PCKS            Pack sent                  1                          70
20                APRC            Application received 1                        70
etc..
I want the statusesto be set as navigation should only allow to go back one by one...like from APRC -->PCKS not to REGD.From PCKS -->REGD etc..not vice versa.
Can enayone explain me to how to set lower and upper limits for these according ot the above requirement.
for more details please check my attachment.
Thanks in advance..!!
Regards,
Sudha.

Once you change the status to previous status, just save the order. Then again open the order & try to change the user status.
Just I made replica of your profile. I could able to change (even without saving the order).

Solved - How to take ownership and change permissions for blocked files and folders in Powershell

Hello,
I was trying to take ownership & fix permissions on Home Folder/My Documents structures, I ran into the common problem in PowerShell where Set-Acl & Get-Acl return access denied errors. The error occurs because the Administrators have been removed from
file permissions and do not have ownership of the files,folders/directories. (Assuming all other permissions like SeTakeOwnershipPrivilege have been enabled.
I was not able to find any information about someone successfully using native PS to resolve the issue. As I was able to solve the issues surrounding Get-Acl & Set-Acl, I wanted to share the result for those still looking for an answer.
Question: How do you use only Powershell take ownership and reset permissions for files or folders you do not have permissions or ownership of?
Problem:
Using the default function calls to the object fail for a folder that the administrative account does not have permissions or file ownership. You get the following error for Get-Acl:
PS C:\> Get-Acl -path F:\testpath\locked
Get-Acl : Attempted to perform an unauthorized operation.
+ get-acl <<<< -path F:\testpath\locked
+ CategoryInfo : NotSpecified: (:) [Get-Acl], UnauthorizedAccessException
+ FullyQualifiedErrorId : System.UnauthorizedAccessException,Microsoft.PowerShell.Commands.GetAclCommand
If you create a new ACL and attempt to apply it using Set-Acl, you get:
PS C:\> Set-Acl -path F:\testpath\locked -AclObject $DirAcl
Set-Acl : Attempted to perform an unauthorized operation.
At line:1 char:8
+ Set-Acl <<<< -path "F:\testpath\locked" -AclObject $DirAcl
+ CategoryInfo : PermissionDenied: (F:\testpath\locked:String) [Set-Acl], UnauthorizedAccessException
+ FullyQualifiedErrorId : System.UnauthorizedAccessException,Microsoft.PowerShell.Commands.SetAclCommand
Use of other functions like .GetAccessControl will result in a similar error: "Attempted to perform an unauthorized operation."
How do you replace owner on all subcontainers and objects in Powershell with resorting to external applications like takeown, icacls, Windows Explorer GUI, etc.?
Tony

Hello,
Last, here is the script I used to reset permissions on the "My Documents" tree structure that admins did not have access to:
Example: Powershell script to parse a directory of User-owned "My Document" redirection folders and reset permissions.
#Script to Reset MyDocuments Folder permissions
$domainName = ([ADSI]'').name
Import-Module "PSCX" -ErrorAction Stop
Set-Privilege (new-object Pscx.Interop.TokenPrivilege "SeRestorePrivilege", $true) #Necessary to set Owner Permissions
Set-Privilege (new-object Pscx.Interop.TokenPrivilege "SeBackupPrivilege", $true) #Necessary to bypass Traverse Checking
#Set-Privilege (new-object Pscx.Interop.TokenPrivilege "SeSecurityPrivilege", $true) #Optional if you want to manage auditing (SACL) on the objects
Set-Privilege (new-object Pscx.Interop.TokenPrivilege "SeTakeOwnershipPrivilege", $true) #Necessary to override FilePermissions & take Ownership
$Directorypath = "F:\Userpath" #locked user folders exist under here
$LockedDirs = Get-ChildItem $Directorypath -force #get all of the locked directories.
Foreach ($Locked in $LockedDirs) {
Write-Host "Resetting Permissions for "$Locked.Fullname
#######Take Ownership of the root directory
$blankdirAcl = New-Object System.Security.AccessControl.DirectorySecurity
$blankdirAcl.SetOwner([System.Security.Principal.NTAccount]'BUILTIN\Administrators')
$Locked.SetAccessControl($blankdirAcl)
###################### Setup & apply correct folder permissions to the root user folder
#Using recommendation from Ned Pyle's Ask Directory Services blog:
#Automatic creation of user folders for home, roaming profile and redirected folders.
$inherit = [system.security.accesscontrol.InheritanceFlags]"ContainerInherit, ObjectInherit"
$propagation = [system.security.accesscontrol.PropagationFlags]"None"
$fullrights = [System.Security.AccessControl.FileSystemRights]"FullControl"
$allowrights = [System.Security.AccessControl.AccessControlType]"Allow"
$DirACL = New-Object System.Security.AccessControl.DirectorySecurity
#Administrators: Full Control
$DirACL.AddAccessRule((new-object System.Security.AccessControl.FileSystemAccessRule("BUILTIN\Administrators",$fullrights, $inherit, $propagation, "Allow")))
#System: Full Control
$DirACL.AddAccessRule((new-object System.Security.AccessControl.FileSystemAccessRule("NT AUTHORITY\SYSTEM",$fullrights, $inherit, $propagation, "Allow")))
#Creator Owner: Full Control
$DirACL.AddAccessRule((new-object System.Security.AccessControl.FileSystemAccessRule("CREATOR OWNER",$fullrights, $inherit, $propagation, "Allow")))
#Useraccount: Full Control (ideally I would error check the existance of the user account in AD)
#$DirACL.AddAccessRule((new-object System.Security.AccessControl.FileSystemAccessRule("$domainName\$Locked.name",$fullrights, $inherit, $propagation, "Allow")))
$DirACL.AddAccessRule((new-object System.Security.AccessControl.FileSystemAccessRule("$domainName\$Locked",$fullrights, $inherit, $propagation, "Allow")))
#Remove Inheritance from the root user folder
$DirACL.SetAccessRuleProtection($True, $False) #SetAccessRuleProtection(block inheritance?, copy parent ACLs?)
#Set permissions on User Directory
Set-Acl -aclObject $DirACL -path $Locked.Fullname
Write-Host "commencer" -NoNewLine
##############Restore admin access & then restore file/folder inheritance on all subitems
#create a template ACL with inheritance re-enabled; this will be stamped on each subitem to re-establish the file structure with inherited ACLs only.
#$NewOwner = New-Object System.Security.Principal.NTAccount("$domainName","$Locked.name") #ideally I would error check this.
$NewOwner = New-Object System.Security.Principal.NTAccount("$domainName","$Locked") #ideally I would error check this.
$subFileACL = New-Object System.Security.AccessControl.FileSecurity
$subDirACL = New-Object System.Security.AccessControl.DirectorySecurity
$subFileACL.SetOwner($NewOwner)
$subDirACL.SetOwner($NewOwner)
######## Enable inheritance ($False) and not copy of parent ACLs ($False)
$subFileACL.SetAccessRuleProtection($False, $False) #SetAccessRuleProtection(block inheritance?, copy parent ACLs?)
$subDirACL.SetAccessRuleProtection($False, $False) #SetAccessRuleProtection(block inheritance?, copy parent ACLs?)
#####loop through subitems
$subdirs = Get-ChildItem -path $Locked.Fullname -force -recurse #force is necessary to get hidden files/folders
foreach ($subitem in $subdirs) {
#take ownership to insure ability to change permissions
#Then set desired ACL
if ($subitem.Attributes -match "Directory") {
# New, blank Directory ACL with only Owner set
$blankdirAcl = New-Object System.Security.AccessControl.DirectorySecurity
$blankdirAcl.SetOwner([System.Security.Principal.NTAccount]'BUILTIN\Administrators')
#Use SetAccessControl to reset Owner; Set-Acl will not work.
$subitem.SetAccessControl($blankdirAcl)
#At this point, Administrators have the ability to change the directory permissions
Set-Acl -aclObject $subDirACL -path $subitem.Fullname -ErrorAction Stop
} Else {
# New, blank File ACL with only Owner set
$blankfileAcl = New-Object System.Security.AccessControl.FileSecurity
$blankfileAcl.SetOwner([System.Security.Principal.NTAccount]'BUILTIN\Administrators')
#Use SetAccessControl to reset Owner; Set-Acl will not work.
$subitem.SetAccessControl($blankfileAcl)
#At this point, Administrators have the ability to change the file permissions
Set-Acl -aclObject $subFileACL -path $subitem.Fullname -ErrorAction Stop
Write-Host "." -NoNewline
Write-Host "fin."
Write-Host "Script Complete."
I hope you find this useful.
Thank you,
Tony
Final Thought: There are great non-PS tools like
Set-Acl and takeown which are external to PS & can also do the job wonderfully. It may be much simpler to call those tools than recreate the wheel in pure
code. Feel free to use whatever best suits your time, scope & cost.

How can I install and config Jolt for IIS so that I can call the services advertised by tuxedo?

How can I install and config Jolt for IIS so that I can call the services advertised
by tuxedo?

It appears that you have apps that need updating that were pruchased from more than one account
- Go to settings>Store and sign out and sign into your account.
- Apps are locked to the account that purchased them.
- To update apps you have to sign into the account that purchased the apps. If you have apps that need updating purchased from more than one account you have to update them one at a time until the remaining apps were purchased from one account.

Error in creating RSDS using transfer rules for master data datasources

Hi ,
when i am creating the transfermations(RSDS) using transfer rules for master data datasources while i want to migrate datasource.it is giving the error message saying that INITIAL ERROR OCCURED DURING GENERATION OF THE TRANSFERMATION.AND in the taskbar it is giving the message LOG IS BEING LOADED.
MY QUESTION IS HOW CAN WE SEE THE LOG? AND
PLEASE GIVE ME THE STEPS TO MIGRATE MASTER DATASOURCES.
THANKS IN ADVANCE .

Hi Ankit,
Yoy have to load data to the cube.For that you need update rules.
Steps to load data to the cube
1.Replicate the datasource.
2.Assign Infosource
3.Create transfer rules
4.Maintain the update rules to the cube.
5.Right click on the datasource and schedule an infopackage for it.
Execute the Infopackage and pull the data to the cube.
Hope this helps
Regards
Karthik

How to specify inclusion and exclusion rules for File data sources

Similar Messages

Maybe you are looking for