BI Publisher Cluster Deployment Issue

Hi All,
I have installed BI Publisher in two nodes A and B (stand alone basic). During scheduler configuration, I have checked cluster option. A load balancer has been configured to point to these two nodes.The data source is file system and location is on network file server.
I have a java program that call BI Publisher webservice and submit the job for scheduling. The java program points to load balancer ip. Currently I am facing two issues as below:
1. When I call BI Publisher webservice to schedule the job, I can see that the job is scheduled through one node only
2. Processing the scheduled job (report generation is distributed into two nodes. But this distribution is not even. If I shedule 5 jobs, Node A is executing one job while the other node executes reamining 4 jobs. Thus I have noticed that Node A remains idle after completing the job till the other node completes the report generation
Do I need to do make any changes/ perform additional configuration so that the job is distributed among the nodes evenly.
Your help will be highlu appreciated
Thanks
Angshuman

First, make sure you've got enough machine resources as BIEE11g is resources hungry.
Next, after installation you should have icons to start BIEE11g (try windows version as it is easier to start up).
Run the startBIEE11g script and it will take some minutes, be patient. Once you get all processes running
then you can try to login.
Take a look at my post:
http://oraclebiblog.blogspot.com/2010/11/starting-and-stopping-biee-from-command.html
Good luck
regards
Jorge

Similar Messages

Bi publisher cluster on weblogic 10.3

I'm trying to setup a BI publisher cluster on weblogic server. I managed to do it on on one physical machine. I deployed war application as an exploded archive and selected "I will make the deployment accessible from the following location C:\apps\xmlpsever.war", and in xmlp-server-config.xml I setup repository as "C:\apps\xmlpsever.war\home\repository\XMLP", and everything works fine.
When I try to do same thing, just that my weblogic machines are different physycal machines I have a problem. If I deploy an application in a war package it doesn't work, and if i deploy it as an exploded archive (like said in Bi publisher Installation Guide) it copies the application to all physical machines but application doesn't deploy well because of BI publisher repository path. I tried to put a repository in one folder, share that folder and then map it to X: on every machine, it doesn't help.
Thank you for any help regarding how to configure publisher repository, XMLDB or any solution?

your cluster is unicast or multicast? if you are using unicast, I would suggest switching to multicast and see if the problem still occurs.
keep us posted.

Routing and Remote access can cause cluster network issues?

After enabling routing and remote access on the servers, we found lots of cluster issues on our server like<o:p></o:p>
Cluster Service stopped
Communication was lost and reestablished between cluster nodes
Unable to access witness resource
Cluster resource failed
can RRAS enabling causes cluster network issues?
Rahul

Hi TwoR,
Please offer more information about your current cluster and RRAS configuration, such as are you installed the RRAS role on any cluster node? Are your cluster in Hyper-V environment?
Or if you want to create the RRAS cluster you can refer the following KB:
Deploy Remote Access in a Cluster
http://technet.microsoft.com/en-us/library/jj134175.aspx
How to configure Network Load Balancing (NLB) based cluster of VPN Servers
http://blogs.technet.com/b/rrasblog/archive/2009/07/02/configuring-network-load-balancing-nlb-cluster-of-vpn-servers.aspx
I’m glad to be of help to you!
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Probelms previewing SWF into file on startup of site after being published to "deploy to web" folder.

I am having problems previewing a "swf" intro file (created in Flash, and saved as an Actionsrcript 3 "swf" file) after the site is published to the "deploy to web". When I open the "Maiin.html" in a browser, the "swf" intro does not play as it did on a browswer from within Flash Catalyst. What can I do to get the "swf" inrto to play on startup of the site?
Caveat: When I initially published the site, I also chose the "publish to AIR option", but recieved an error message to check the code in the code space of Flash Catalyst in the "problems area" at the bottom of that menu. I did check, and there were no problems in the bottom area. Could this be part of the problem why the "swf" intro will not preview in a browser after being published to "deploy to web"?

> www.melodiousthought.com/mtdesign/
Same issue as the other thread you barged in on.
this:
<script src="../../../Scripts/AC_RunActiveContent.js
is in a page in the second level of the site.
there is NO WAY to go three folder levels up from
http://www.melodiousthought.com/mtdesign/
Define the local and remote site folders to the correct
level.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/

EJB deployment issue in websphere

EJB deployment issue in websphere
I have created an EJB project in eclipse and created a stateless session bean successfully.
I created Enterprise application project and added the EJB project.
I tried to check it using Universal test client.
When I click the JNDI explorer>>sample.HelloWorldEJBHome
I get error IWAD0401E Unknown type of JNDI object
But when I install an EJB jar using administrator console after exporting the jar file for the EJB project
It is working file
I like to reduce the number of steps by right clicking the server publish and test.
Do any one have come across the same issue please help me
Thanks in advance.

Hi,
i have not done any changes to any process. I have created new DC and created new process.
new DC is not getting deployed with error "Adapter com.sap.glx.adapter.internal.Transformer didn't comply with configuration". If you will check error log above then you will find it their.

BI Publisher -RTF Template issue: Output report not maintaining text with bullets and numberings.

Hi All,
I am currently working with generating reports using BI Publisher. My issue is that when I will preview the output(in PDF and RTF) format's of the newly created template, then, if the data coming from DB have some bullets or numbering, then the BI publisher output will ignore the same and will show the complete data as one single line.
For example if the data in the DB Field is like below:
The XYZ has the below sub-parts:
ABC : This again has two parts:
abc1
abc2
CDE
FGH
Then this data will appear as below in the BI Publisher output report's:
The XYZ has the below sub-parts: • ABC : This again has two parts: o abc1 o abc2 • CDE • FGH
I want the format of the data (with bullets and number's) should be maintained in the BI Publisher Report as well, but I am unable to find any solution for the same.
Any help on the same is much appreciated.
Deep Bhoj

in your query will u get all the columns always null when column1 is null
in your template for each group u can write like below
think G_1 as group in your xml
<?for-each:G_1[COLUMN1!='']?><?COLUMN1?><?COMMENTS?><?end for each?>
or if u are not sure u get null in both places every time u can write like below
<?for-each:G_1[COLUMN1!='' and COMMENTS!='']?><?COLUMN1?><?COMMENTS?><?end for each?>

Outbound BPEL Process deployment Issue in SOA (binding.jca-12600)

Hi,
I have Designed an Outbound BPEL Process for Siebel CRM Service Integration using Jdeveloper (11.1.1.3.0). After that I am facing the deployment issue of this application in SOA suite (11.1.1.6.0). Following is the deployment.log status in jdeveloper:-
[10:57:54 AM] ---- Deployment started. ----
[10:57:54 AM] Target platform is (Weblogic 10.3).
[10:57:54 AM] Running dependency analysis...
[10:57:54 AM] Building...
[10:57:58 AM] Deploying profile...
[10:57:58 AM] Wrote Archive Module to C:\JDeveloper\mywork\Siebel_Outbound_BPEL\QueryWithView_Invoke\deploy\sca_QueryWithView_Invoke_rev1.0.jar
[10:57:58 AM] Deploying sca_QueryWithView_Invoke_rev1.0.jar to partition "default" on server AdminServer [10.10.22.81:7001]
[10:57:58 AM] Processing sar=/C:/JDeveloper/mywork/Siebel_Outbound_BPEL/QueryWithView_Invoke/deploy/sca_QueryWithView_Invoke_rev1.0.jar
[10:57:58 AM] Adding sar file - C:\JDeveloper\mywork\Siebel_Outbound_BPEL\QueryWithView_Invoke\deploy\sca_QueryWithView_Invoke_rev1.0.jar
[10:57:58 AM] Preparing to send HTTP request for deployment
[10:57:59 AM] Creating HTTP connection to host:10.10.22.81, port:7001
[10:57:59 AM] Sending internal deployment descriptor
[10:57:59 AM] Sending archive - sca_QueryWithView_Invoke_rev1.0.jar
[10:58:00 AM] Received HTTP response from the server, response code=500
[10:58:00 AM] Error deploying archive sca_QueryWithView_Invoke_rev1.0.jar to partition "default" on server AdminServer [10.10.22.81:7001]
[10:58:00 AM] HTTP error code returned [500]
[10:58:00 AM] Error message from server:
#;There was an error deploying the composite on AdminServer: Deployment Failed: [JCABinding] [QueryWithView_Invoke.QueryWithView/1.0]Unable to complete load due to: Generic error.
#;Generic error.
#;Cause: Unable to find suitable outbound binding.
#;Please create a Service Request with Oracle Support.
#;: Generic error.
#;Generic error.
#;Cause: Unable to find suitable outbound binding.
#;Please create a Service Request with Oracle Support.
[10:58:00 AM] Check server log for more details.
[10:58:00 AM] Error deploying archive sca_QueryWithView_Invoke_rev1.0.jar to partition "default" on server AdminServer [10.10.22.81:7001]
[10:58:00 AM] #### Deployment incomplete. ####
[10:58:00 AM] Error deploying archive file:/C:/JDeveloper/mywork/Siebel_Outbound_BPEL/QueryWithView_Invoke/deploy/sca_QueryWithView_Invoke_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
And the following is the SOA Server Side log file status:-
####<Jun 3, 2013 10:36:05 AM AST> <Info> <Health> <HOSADDAT02> <AdminServer> <weblogic.GCMonitor> <<anonymous>> <> <4be72ac3bdb5ebae:-a61256d:13f08d94c98:-8000-00000000000000f4> <1370244965280> <BEA-310002> <36% of the total memory in the server is free>
####<Jun 3, 2013 10:36:12 AM AST> <Error> <ServletContext-/soa-infra> <HOSADDAT02> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <4be72ac3bdb5ebae:-a61256d:13f08d94c98:-8000-000000000000182b> <1370244972343> <BEA-000000> <Error during deployment
oracle.fabric.common.FabricException: Deployment Failed: [JCABinding] [QueryWithView_Invoke.QueryWithView/1.0]Unable to complete load due to: Generic error.
Generic error.
Cause: Unable to find suitable outbound binding.
Please create a Service Request with Oracle Support.
: Generic error.
Generic error.
Cause: Unable to find suitable outbound binding.
Please create a Service Request with Oracle Support.
     at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeploymentCoordinatorImpl.coordinateCompositeDeployment(StandaloneCompositeDeploymentCoordinatorImpl.java:64)
     at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deployNewComposite(BaseDeployProcessor.java:415)
     at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:250)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:167)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:112)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:99)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:81)
     at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPostInsideLoggingSession(CompositeDeployerServlet.java:219)
     at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:130)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: oracle.fabric.common.FabricDeploymentException: [JCABinding] [QueryWithView_Invoke.QueryWithView/1.0]Unable to complete load due to: Generic error.
Generic error.
Cause: Unable to find suitable outbound binding.
Please create a Service Request with Oracle Support.
: Generic error.
Generic error.
Cause: Unable to find suitable outbound binding.
Please create a Service Request with Oracle Support.
{rootCauses=[]}
     at oracle.integration.platform.blocks.adapter.AdapterReference.load(AdapterReference.java:458)
     at oracle.integration.platform.blocks.adapter.AdapterReference.load(AdapterReference.java:82)
     at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deployReferences(CompositeDeploymentConnection.java:201)
     at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deploy(CompositeDeploymentConnection.java:93)
     at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.initDeployment(CompositeDeploymentManagerImpl.java:150)
     at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.load(CompositeDeploymentManagerImpl.java:63)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at oracle.integration.platform.blocks.deploy.DeploymentEventPublisher.invoke(DeploymentEventPublisher.java:77)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy314.load(Unknown Source)
     at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeploymentCoordinatorImpl.coordinateCompositeDeployment(StandaloneCompositeDeploymentCoordinatorImpl.java:59)
     at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deployNewComposite(BaseDeployProcessor.java:415)
     at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:250)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:167)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:112)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:99)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:81)
     at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPostInsideLoggingSession(CompositeDeployerServlet.java:219)
     at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:130)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: BINDING.JCA-12600
Generic error.
Generic error.
Cause: Unable to find suitable outbound binding.
Please create a Service Request with Oracle Support.
     at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterBindingConfig.addAdapterReference(AdapterBindingConfig.java:206)
     at oracle.integration.platform.blocks.adapter.AdapterReference.setupAdapterReference(AdapterReference.java:506)
     at oracle.integration.platform.blocks.adapter.AdapterReference.load(AdapterReference.java:425)
     at oracle.integration.platform.blocks.adapter.AdapterReference.load(AdapterReference.java:82)
     at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deployReferences(CompositeDeploymentConnection.java:201)
     at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deploy(CompositeDeploymentConnection.java:93)
     at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.initDeployment(CompositeDeploymentManagerImpl.java:150)
     at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.load(CompositeDeploymentManagerImpl.java:63)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at oracle.integration.platform.blocks.deploy.DeploymentEventPublisher.invoke(DeploymentEventPublisher.java:77)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy314.load(Unknown Source)
     at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeploymentCoordinatorImpl.coordinateCompositeDeployment(StandaloneCompositeDeploymentCoordinatorImpl.java:59)
     at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deployNewComposite(BaseDeployProcessor.java:415)
     at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:250)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:167)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:112)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:99)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:81)
     at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPostInsideLoggingSession(CompositeDeployerServlet.java:219)
     at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:130)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Kindly help me in this regard

Solution:
Workaround the issue immediately by removing the "ns1:" qualification on the operation for the binding.jca entry in the composite.xml and redeploying.
For example:
From:
<binding.jca config="BAPI_COMPANYCODE_GETDETAIL_invoke_3P.jca"
operation="ns1:BAPI_COMPANYCODE_GETDETAIL"/>
To:
<binding.jca config="BAPI_COMPANYCODE_GETDETAIL_invoke_3P.jca"
operation="BAPI_COMPANYCODE_GETDETAIL"/>
Regards,
Shaheer Badar

Adobe Acrobat 9 Pro deployment issue

Hello. I am having a deployment issue with Adobe Acrobat 9 using Altiris. I create the rip which is bassically an image of the install. My facility has pruchased 50 seats for this software so I know we are covered for the users that we have to use this software. The issue that I am having after I make the rip, and deploy it to a machine it asks for the CD key again in order to use. Am I having an issue with my installation or is Adobe put some kind of security into their software so that when you try to make a rip of the installation is asks for teh CD Key again after the install? Is this an issue that can be resolved?

SOLUTION:
The issue was somehow related to DPI (START > Settings > Control Pannel > Display > Settings Tab > Advanced button). Eventhough the DPI was set to normal, I switched it to LARGE, restarted the machine, logged in after the reboot, changed it back to normal size, restarted again, logged in once more, checked the Printer Preferences and PRESTO --- a properly displayed window.

Deploy issue from JDeveloper 10.1.3.5 to OAS 10.1.2

I have written an application using ADF on JDeveloper 10.1.3.5 and need to deploy it to our OAS 10.1.2. I have run the adfinstaller on the linux server to upgrade the ADF libraries to the correct versions, updated the web.xml files to have the correct versions, changed to J2SE 1.4.2_19 for the application and have still got deployment issues.
Error
An error occurred while redeploying application "FormsSiebelIntegration". See base exception for details.
Resolution:
See base exception for details.
Base Exception:
java.lang.UnsupportedClassVersionError
com/sun/faces/application/ApplicationAssociate (Unsupported major.minor version 49.0). com/sun/faces/application/ApplicationAssociate (Unsupported major.minor version 49.0)
Removing the jsf-impl.jar file allows the application to deploy, but when running on the app server I get the following errors:
OracleJSP: oracle.jsp.parse.JspParseException:
/codename.jspx: Line # 6, <jsp:root xmlns:jsp="http://java.sun.com/JSP/Page" version="2.0" xmlns:h="http://java.sun.com/jsf/html" xmlns:f="http://java.sun.com/jsf/core" xmlns:af="http://xmlns.oracle.com/adf/faces" xmlns:afh="http://xmlns.oracle.com/adf/faces/html">
Help! I'm starting to have total mind block as to what to do next.
Error: Unable to load taghandler class: http://java.sun.com/jsf/html

I had already applied all of this before trying to deploy.
The error seems to be a versioning error in the jsf-impl.jar file as the ApplicationAssociate class is found there. I have changed the JDK and J2EE to 1.4.2 and 1.3 respectively, rebuilt everything, updated all the settings to the right versions for 10.1.2 but it still keeps failing on the deploy.

Failing to publish and deploy from CVS Repository

We have installed CVS on one of the machine and we have configured the CVS in our studio (version 5.7 MP3).
We stored the project in the repository(CVS) and when publish and deployed it pops up with an error message and fails to publish.
But before storing it in the CVS there were no errors and was successfuly publishing and deploying.
Even the exported file if executed in a different workspace (without CVS configured), it runs successfully.
Is it that we need to unlock in some file for successfull execution.
Please suggest / help.
Thanks in advance
Jayant

Hi,
Do you want to configuring SSL for cloud service? I suggest you have a look at the following article.
#http://www.windowsazure.com/en-us/documentation/articles/cloud-services-configure-ssl-certificate/
Please try to do as above article, in addition please note the certificate must meet the following requirements for SSL certificates in Windows Azure. If I misunderstand, please feel free to let me know.
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

A very urgent deployment issue about DBAdapter

Hello All,
I have a very urgent deployment issue about DBAdapter.
That DBAdapter is connect to DB2 AS400 Database. I have a developing database (jdbc:as400://server01/TEST) and a production database (jdbc:as400://server01/PROD).
During developing, I used DBAdapter wizard to create it, and import some tables, and set the Adapter to use jabc/DB2DS as connection information for easily deployment later.
Then I deploy to Production. I configured Data-source.xml and oc4j-ra.xml rightly; I set DB connection point to production database. But the DBAdapter still write into developing Database.
I checked the DBAdapter, the imported tables are something like this, TEST.table1, TEST.table2. And there are a lot "TEST" located in DB2Writer_toplink_mapping.xml, DB2Writer.xml, TEST.schema, DB2Writer.table1.ClassDescriptor.xml.
This TEST is refrer to the TEST in connect String jdbc:as400://server01/TEST.
I think this might be the reason cause the problem. As to production database, "TEST" should replaced by "PROD". If I changed it manually, I have to change every time when switch between TEST and PROD. And I also don't know if it is safe to do it? (I tried, and bring some toplink mapping problem)
By the way, for Oracle Database, because we use 2 instances for testing and production with same schema name, and do not have this issue.
Anyone could help and many thanks.
Kerr
Message was edited by:
Kerr

Hi Kerr,
The idea is to set up all connections in the BPEL or ESB services with logical names, e.g. typically of the form eis/DB/MyFinancialSystem or eis/DB/MyLogisticsSystem. This way, you do not have to modify code when deploying it onto different environments that serve different purposes.
When moving your services through their lifecyle, on every environment you deploy these to you will have the same logical connections configured on each instance, e.g. for DEV, QA, SIT, UAT and PROD. Only, in case of QA the actual physical connection is configured to point to the QA instance of the systems that your services interact with whereas in case of UAT it points to the UAT instance of the same system.
Maybe your problem is caused by connecting as user "SomeUser" when running the DB Adapter wizard during development and actually selecting objects from a different schema than you used to connect with, e.g. "Test" in your case.
Hth,
Sjoerd

Need steps to create ant scripts for publishing and deploying projects.

Need steps to create ant scripts for publishing and deploying projects.
Have got ant, Oracle BPM Enterprise WL edition installed , Need to know what are the other configurations to be done.
Any working example would help me to understand, please do mail me at [email protected]
Thanks in advance.
-Sree

Sreekant,
Please find the build file to publish and deploy.
<project name="deployProject"
xmlns:fuego="antlib:fuego.tools.ant.enterprise"
xmlns:fuego.j2ee="antlib:fuego.tools.ant.j2ee" default = "publish">
          <property file="./Properties/fuego_deploy.properties"/>
          <fuego:passport id="fuego.passport"
directoryid="${fuego.directoryid}"
preset="engine" />
<target name="publish" description="Publish and deploy processes" depends = "takeInputs">

<fuego:session
passportref="fuego.passport"
verbose="true"
               properties="${fuego.basedir}/conf/directory.xml"
haltonerror="true" >

<fuego:publish fpr="${fuego.project.name}"
deploy="true"
engine="${fuego.engineName}"
                    importdata = "${fuego.importdata}"
                    automaproles="${fuego.automaproles}"
                    automapbuspars = "${fuego.automapbuspars}"
                    automapvars="${fuego.automapvars}"
                    automapconfigs = "${fuego.automapconfigs}">
</fuego:publish>
</fuego:session>
</target>
<target name= "takeInputs" >
<input
message="Please enter admin-username:"
addproperty="fuego.participant"
/>
<input
message="Please enter admin-password:"
addproperty="fuego.password"
>
</input>
</target>
</project>
and find the properties I have used..
fuego.basedir=C:\OraBPMEnterpriseHome
fuego.directoryid=default
fuego.engineName = bpmengine
fuego.project.name = E:/antExamples/Project/CommonUtilities
# If the below property is true then ant script imports data from the project, as defined in Studio.
# This includes importing:
#      •Holiday and Calendar rules
#      •Organizational Units
#      •Roles
#      •Resource configurations
#      •External Variables
fuego.importdata = true
#If the below property is true ant script automatically map abstract roles to real ones with the same name.
fuego.automaproles=true
#If the below property is true ant script automatically map business parameter variable names (as defined in the project design) to an business parameter variable id with the same name (as defined in the Fuego Enterprise directory).
fuego.automapbuspars = true
#If the below property is true ant script automatically map external variable names (as defined in the project design) to an external variable id with the same name (as defined in the Fuego Enterprise directory).
fuego.automapvars=true
#If the below property is true ant script automatically map External Resources configurations (as defined in the project design) to real Configurations with the same name (as defined in the Fuego Enterprise directory).
fuego.automapconfigs = true

Re: Deployment Issues

Hi Dale;
We have the similar situation. We wrote an application to be able to send
alert message before we shut down the Forte application. When we upgrade our
applications, we will send alert message to all users before we shut down the
Forte application through ECONSOLE which forces all users to log out, and then
overwrite the files.
Our client files are sitting at one of our network servers instead of
individual user's PC, so the user accesses the files through network. So we
are facing the same issue that we have to shut all users down before we
upgrade our applications. If you install those files on your individual user's
PC, you may try to use "compatible level" to update your application.
Hope this helps.
Lu Wang
Eli Lilly and Company
[email protected]

My problem lies more in the way that we update the Forte software. We are
controlled enough with a new distribution from the application side that
there are not problems there.
My question is: how is everyone updating their client PC's from say Forte
R2 to R3. This was not a problem before because we didn't have very many
clients. Now we have quite a few and we can't just copy the proper files
because of the registry updates that are required.
Does anyone have any suggestions? Can I run the Forte client software off
the Novell server?
Thanks,
Tony
-----Original Message-----
From: Lu Wang X1 <[email protected]>
To: Dale V. Georg <[email protected]>
Cc: Forte Users <[email protected]>; Gardner, Steve
<[email protected]>
Date: Wednesday, November 19, 1997 11:17 AM
Subject: Re: Deployment Issues
You are right. Through econsole, we can only shut down the serverpartitions,
even though we can uninstall the application, as long as the clientpartition
is running, we can't overwrite the files. We were probably lucky that nouser
was running the application when we upgraded it.
Since our applications can capture the system alert message, probably wecan
make changes to our application to be able to shut itself down when it
receives certain type of alert message. Just a thought. Don't know ifthere
is any better way to handle it.
Lu
"Dale V. Georg" <[email protected]> on 11/19/97 03:02:27 AM
Please respond to "Dale V. Georg" <[email protected]>
To: Lu Wang X1/AM/LLY
cc: Forte Users <[email protected]>, "Gardner, Steve"
<[email protected]>
Subject: Re: Deployment Issues
On Tue, 18 Nov 1997 11:04:53 -0500, Lu Wang X1 wrote:
Hi Dale;
We have the similar situation. We wrote an application to be able to send
alert message before we shut down the Forte application. When we upgradeour
applications, we will send alert message to all users before we shut down
the
Forte application through ECONSOLE which forces all users to log out, andthen
overwrite the files.If I remember correctly, econsole will only forcibly close down the
server partitions, not the client partitions.
Our client files are sitting at one of our network servers instead of
individual user's PC, so the user accesses the files through network. So
we
are facing the same issue that we have to shut all users down before we
upgrade our applications. If you install those files on your individualuser's
PC, you may try to use "compatible level" to update your application.We did think about using the compatibility level at one point, but that
introduces extra maintenence whenever a new version of the application
is rolled out. On the other hand, if that's the cost of a smooth and
reliable upgrade, then it may be worth paying.
Dale
================================================
Dale V. Georg
Systems Analyst
Indus Consultancy Services
[email protected]
================================================

Cluster deploying E-Business using GI

Hi,
Does anyone have any instruction/documentation/references on how to cluster deploy E-Business Suite as an application using Oracle Grid Infrastructure ?
My understanding is that Grid Infrastructure / Clusterware can be used to cluster deploy any application ?
So I am interested in trying to use it to cluster deploy the E-Business Application itself. Note I am not simply talking about a RAC deployment of an E-Business database ( which there is plenty of documentation on ). Rather I am talking about cluster deplying the Apps Tier itself using Grid Infrastructure.
Traditionally I have seen Oracle notes on advance Load Balancer topolgies to in effect achieve this. However I was wanting to test the Oracle assertion that their Grid Infrastructure solution can cluster deploy any application capable of being cluster deployed.
The E-Business/ATG team themselves through MOS do not seem to know how to use Oracle Grid Infrastructure to cluster deploy their product, so I thought I would give the wider world a shout to see if there was any knowledge on this
Any help greatly appreciated,
Jim

Your steps look OK to me.
Thanks,
Hussein

Ear deployment issue.

Hi,
i am using jdev Studio Edition Version 11.1.1.4.0
I have created EAR of my application and trying to depoly it on Weblogic server.
I have following entry in weblogic-application.xml
<library-ref>
<library-name>adf.oracle.domain</library-name>
</library-ref>
[03:12:39 PM] ---- Deployment started. ----
[03:12:39 PM] Target platform is (Weblogic 10.3).
[03:13:07 PM] Retrieving existing application information
[03:13:07 PM] Running dependency analysis...
[03:13:07 PM] Building...
[03:13:28 PM] Deploying 3 profiles...
[03:13:29 PM] Moving WEB-INF/adfc-config.xml to META-INF/adfc-config.xml
[03:13:30 PM] Wrote Archive Module to /home/kpophale/CDMR/13June/frontend/ConsoleApps/AppsInventoryManagerUi/deploy/AppsInventoryManagerUi.jar
[03:13:38 PM] Wrote Web Application Module to /home/kpophale/CDMR/13June/frontend/ConsoleApps/AppsInventoryManagerUi/deploy/AppsInventory.war
*[03:13:38 PM] Removing the following prohibited entry from the EAR: lib/trinidad-api.jar*
*[03:13:38 PM] Removing the following prohibited entry from the EAR: lib/trinidad-impl.jar*
[03:13:38 PM] removed bundleresolver.jar from lib because it cannot be part of an EJB deployment
[03:13:54 PM] Wrote Enterprise Application Module to /home/kpophale/CDMR/13June/frontend/deploy/AppsInventoryManager.ear
[03:13:55 PM] Entering Oracle Deployment Plan Editor
[03:15:53 PM] Deploying Application...
[03:16:41 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application AppsInventoryManager on AdminServer.: [Deployer:149145]Unable to contact 'bam_server1'. Deployment is deferred until 'bam_server1' becomes available.; nested exception is:
     java.rmi.UnknownHostException: Could not discover administration URL for server 'bam_server1'.
[03:16:41 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application AppsInventoryManager on AdminServer.: [Deployer:149145]Unable to contact 'osb_server1'. Deployment is deferred until 'osb_server1' becomes available.; nested exception is:
     java.rmi.UnknownHostException: Could not discover administration URL for server 'osb_server1'.
[03:16:41 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application AppsInventoryManager on AdminServer.: [Deployer:149145]Unable to contact 'soa_server1'. Deployment is deferred until 'soa_server1' becomes available.; nested exception is:
     java.rmi.UnknownHostException: Could not discover administration URL for server 'soa_server1'.
[03:16:41 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application AppsInventoryManager on AdminServer.: [Deployer:149145]Unable to contact 'adf_server1'. Deployment is deferred until 'adf_server1' becomes available.; nested exception is:
     java.rmi.UnknownHostException: Could not discover administration URL for server 'adf_server1'.
[03:16:41 PM] [Deployer:149193]Operation 'deploy' on application 'AppsInventoryManager' has failed on 'AdminServer'
[03:16:41 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application AppsInventoryManager on AdminServer.: Failed to load webapp: 'trellis-AppsInventoryManagerUi-context-root'.
[03:16:41 PM] Weblogic Server Exception: weblogic.application.ModuleException: Failed to load webapp: 'trellis-AppsInventoryManagerUi-context-root'
*[03:16:41 PM] Caused by: java.lang.NoClassDefFoundError: org/apache/myfaces/trinidad/webapp/UIXComponentELTag*
[03:16:41 PM] See server logs or server console for more details.
[03:16:41 PM] weblogic.application.ModuleException: Failed to load webapp: 'trellis-AppsInventoryManagerUi-context-root'
[03:16:41 PM] #### Deployment incomplete. ####
[03:16:41 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
I am getting above exception while i am trying to depoly the my ear. please see bold lines.
Please give me some guide line .
Regards,
Kiran.

Hi John,
Yes I have. I even tried on two seperate WebLogic installations. I noticed, even when I create just an ear file (not deploy to server), it gives me the same warnings about removing trinidad. Is there something i'm missing in JDeveloper?
For my installations:
On one Middleware home: I installed: WLS 10.3.5, ADF 11.1.1.5, then ADF 11.1.2 Patch 12611176. configured domain with all ADF/JRF libraries, followed by upgradeADF WLST command. I got same deployment issue.
On another middleware home: I even just installed JDeveloper 11.1.2, configured a new domain with all librearies. I got same deployment issue.
FYI: I also added the two Trinidad JSP Tag Libraries to my View Controller Project. I got same error.
Thank you,
Gavin
Edited by: GavinWoods on Feb 14, 2012 6:25 AM

BI Publisher Cluster Deployment Issue

Similar Messages

Maybe you are looking for