BI70 upgrade and landscape sizing
We are currently part of the BI70 ramp up. Our whole BW landscape (21 systems) is currently running on BW 3.1 SPS 22. By upgrading the BW abap to BI70, I would like to have an estimate on how to size the different systems.
The quicksizer only allow us to enter data for a new installation and not to have the delta between different version.
So could anybody advice on how we can plan for the new sizing for the currently used process ? and how the additional or specifc BI70 process could impact the sizing in terms of Memory, CPU, disk capacity ?
Thanks
Message was edited by: Alexis Lefebvre
Hi Vladimir,
In LMDB if the landscape Pattern is Hub (When the technical system is used in several product systems) then during MOPZ stack generation it will show the respective landscape upgrade details.
if the landscape Pattern is Sidecar(When the technical system is used in single product systems)
MOPZ will show only the particular upgrade details.
if the ECC is sidecar, then MNOPZ will show only the respective stack details. or ECC is added like HUB like ERP 6.0, SAP netwear 7.0 and SAP SRM , then it will show all the product system upgrade details
Check the below link also for more details:
https://websmp101.sap-ag.de/~sapidb/011000358700000044972013E/SpecificsInstUpgrade.pdf
New in SP05: Product System Editor in the Landscape Management Database of SAP Solution Manager 7.1
Rg,
Karthik
Similar Messages
-
4.7EEx1.10 to ECC6.0 upgrade and Unicode conversion
Hi Experts,
We are going to initiate the upgrade from next month onwards. Subsequently i have started preparing the plan and strategy for the same.
As our current setup is 4.7EEx110/Win 2003 R2-64 bit/Oracle 10.2.0.4.0 (Non unicode). And we have recently migrated on to this setup from WIn2k 32 bit. Also the current hardware is Unicode compatible.
With respect to strategy for achieving this Upgrade and Unicode conversion, i am planning as follows.
Step 1) Perform Unicode conversion on the current landscape (Both Export/import on the same servers)
Step 2) Setup Temporary landscape as part of Dual maintenance strategy and migrate data from the current systems to temporary systems using backup/restore method.
Step 3) Perform the SAP version upgrade on the current landscape and setup transport routes from temporary to current landscape in order to keep it in sync
Step 4) after successful upgrade, decommission the temporary landscape
Please provide your suggestions and valuable advices if there is anything wrong with my strategy and execution plan.
Regards,
DheerajHi,
Thanks. As i have already referred these notes as i am seeking advise with respect to my upgrade approach.
However i have planned to perform in the following manner.
1) Refresh Sandbox with Prod data and perform Upgrade to ECC6.0 EHP5 & subsequently Unicode conversion on the same server (Since both export & Import has to perform on the same hardware as we have recently migrated on this hardware which is Unicode compatible)
2) Setup temporary landscape for DEv & QAs and establish transport connection to Production system in order to move urgent changes
3) Keep a track of the changes which have transported during upgrade phase so that the same can be implemented in the upgraded systems i.e. Dev & QAS
4) After Sandbox Migration and signoff, we will perform Dev & QAS upgrade & unicode conversion on the same hardware (Note: Since these are running on VMware can we export the data from the upgraded system and import on to a new VM?)
5) Plan for production cutover and Upgrade the Prod system to ECC6.0 Ehp5 and then Unicode conversion. As i am planning to perform upgrade over the weekend and then Unicode conversion activity in the next weekend (Is it a right way?)
My Production setup: DB on one Physical host and CI on separate Virtual host
6) After the stabilization phase, we are planning for OS & DB upgrade as follows:
a) Windows upgrade from 2003 R2 to Windows 2008 R2
b) Oracle Upgrade from 10.2 to 11.2
If anyone thinks that there is anything wrong with my above approach and need changes then please revert.
I have one more doubt as I am going to upgrade 4.7EEx110 (WAS 620, Basis SP64) to ECC6.0 EHp5.As I presume that I can straight away upgrade from the current version to ECC6.0 Ehp5 without installing EHP. Kindly confirm
Thanks -
How to create a single action for adding a border and signature for portrait AND landscape images???
i would love to be able to create a single photoshop action for adding a border, plus a signature in the bottom right corner, that works for both portrait and landscape images.
need i say more?!
i already have an action that adds a signature in the centre of the border at the bottom of the image e.g. the image below. what i want though is for that signature to be on the RHS and for the same action to work for portrait images as well.
supplementary info: reason for this is that I want to be able to export 300 wedding images (mix of landscape and portrait images) from lightroom in my pre-selected order (meaning the files are labelled from 001 to 300, ordered according to how the wedding day unfolded) and then use PS to add the border and the signature, in the same place, and for it to work for both orientations.
i need this to work for full sized exported jpeg images, i.e. i want the files that i give on CD to my clients to include my signature in this manner. so I don't want to copy the initial layer and then reduce the second layer size to leave a border around the second layer.
i hope i've been clear and that someone can help me here. I think that this sort of presentation makes such a difference to final printed image, and I DONT want to have to go to all 300 images picking out the landscape from portrait ones (although this may be what I have to do and wouldn't really take that long but surely there's a better way!!!!).
Thanks in advance photoshoppers ...It is actually quite easy to do if you have a good understanding of how Photoshop works. To be able to handle any size Landscape and Portrait you need to scale the document to a known width or height. Once the document is resized to the width or height it easy. When yot resize the document you use Image size with resample NOT checked. Not a single image pixels is changed all the happens is the documents DPI is set to the proper DPI resolution to print that size. This lets you add a border sized for and document. You can use Canvas Size check relative and leatve the anchor point centered and set width and height to 2" this will add 1"on all sides. Use Canvas size a second time move the anchor point to the top center check relative and set height 1" the will add an additional 1" border on the bottom. You then record a text layer with your Name title or what ever to the top left of the image. Select all ant the align the text layer to the selection to move it to the bottom right.
Adding a couple of scripts to the action you can make sure there is a background layer so the added canvas will be filled with pixels. You can restore the document to its original DPI resolution to retain the images print size. Down load my crafting actions package it contains a dozen scripts to be used within actions. There are text file with tips and guidelines additionaly there is one on dealing with document size and includes a sample action set with a watermarking action the can watermark and size image. The Action set is also saved as a text file with additional comments I added my downloads can be found here http://mouseprints.net/Photoshop.html -
Word 2007 mail merge : problem with mixed portrait and landscape orientations
Hi there,
I have a 3 pages document Word 2007 file
This is a mail merge I want to export in PDF using Adobe Acrobat Printer,
then send "big" PDF to printing.
page 1 is PORTRAIT
page 2 is PORTRAIT
page 3 is LANDSCAPE
In PDF pages 1 and 2 are perfectly fine, inside an A4 format (width=210 height=297mm or something)
but for page 3, system changed to a "double" sized page (A3 width=297 height=420) and printed my stuff at the 1st top middle of big page.
So I have a big "double" sheet, oriented PORTRAIT, with my stuff in 1st half, and a blank in 2nd half.
It seems that system did not rotate the page... and just put the stuff into a bigger sheet to "solve" at best.
I would like the same size of paper (A4) but in landscape : width=297 height=210
I have already seen many PDF with mixed portrait and landscape orientations, so what's the thing ?
With my advanced thanks,
And greetings from Paris, France !
VinceSome questions:
Which version of office were you using before? 2003?
Are the data files on a network, or on your local machine? If they are on a network, can you make a copy of one of them on your local machine and try again?
Can you open the files directly in Excel? What extension do they have (.xls, or something else?) I am wondering whether access to other file types has been left blocked on your machine but is allowed on your colleague's machine.
Are you just opening the mail merge main document and seeing this message? If so, do you see the same thing if you start with a new document and try to connect to one of these data sources?
Can you confirm that the message is about Access even though you are trying to connect to an Excel file?
(Also, office 2007 has some new stuff - that let's you specify that certain folders are "trusted" . I don't think that ever affected MailMerge but it may be as well to make sure that your documents and data sources are in trusted locations).
Also worth trying to start Word in "Safe mode" - see, e.g. http://office.microsoft.com/en-gb/word-help/work-with-office-safe-modes-HP010140792.aspx
Peter Jamieson -
My iPod touch is not recognized by Windows 7 and will not appear on My Computer as a storage device after OS 5.1.1 upgrade and received an 1602 error. My iPod is now having a connect to iTune screen.
Error 1600, 1601, 1602: Try the following steps to resolve this error:
Ensure proper USB isolation troubleshooting has been performed, and test with a known-good cable.
Follow the steps listed for Error 1604.
This error may be resolved by disabling, deactivating, or uninstalling third-party security, antivirus, and firewall software. See steps in this article for details on troubleshooting security software.
http://support.apple.com/kb/TS3694#error1602 -
How can I remove this new Kitkat upgrade and go back to what I had. I cannot deal with the color on text screen and the keyboard is terrible. Can take back all the stupid pictures they added for texting. Just need it back to what it was.
Hasn't any business ever heard of the term.
IF IT AINT BROKE DON'T FIX IT. -
I have just updated to iOS7, no icon for browser, was using Safari, how do I get it back and can I reverse the upgrade and go back to iOS6? Thanks to you from the UnTechie
The icon for Safari has probably moved to make room for new apps. Scroll the Home screen to look for it.
You cannot reverse the upgrade. -
What is difference between Startup upgrade and startup migration.
what is difference between Startup upgrade and startup migration.
I am having the metalink note.
STARTUP MIGRATE was introduced in 9.2 as a mechanism to be sure that most everything that needs to be done to run an upgrade script or a patch script is done automatically. In the past, customers were expected to adjust certain initialization parameters prior to beginning an upgrade or applying a a patch,
but most of this is now done automatically by STARTUP MIGRATE.
When a customer starts a database in MIGRATE mode, the following ALTER SYSTEM
commands will be set automatically:
But i am not sure what exactly the meaning by startup upgrade.
and exactly the startup upgrade and startup migrate -
Could you remind me how to synch music back from my ipod to my computer - my ipod has my whole collection but my laptop has been upgraded and i lost my library
Follow the steps given here...
Syncing to a "New" Computer or replacing a "crashed" Hard Drive -
Someone please help me I have an iPhone 3GS version 4.2.1 8c148a and I downloaded slotmania this morning and it won't let me play it keeps asking if I want to upgrade and I can't upgrade because phone won't let me so I'm wanting to play my game I use to could play it and farmville but for some reason it won't let me play .... Can someone help me figure out something because I'm sure their is a way I can and husband won't upgrade me and I got free upgrade and can't even get because he's cheap it's sad Hugh
What iPhone do you have? You can check in settings>>general>> about.
If you have a 3G you cannot update beyond iOS 4.2.1. The 3G is over 4 years old an was discontinued over 2 1/2 years ago. You need the latest ios to run the latest versions of some apps. If you have a 3GS you can update.
If your phone is not responding, reset it by pressing and holding down both the home button ad lock/ sleep button simultaneously until the Apple logo appears. -
Firefox has suddenly gone wrong. I was successfully running both Firefox and Internet Explorer 8 on Windows 7. My laptop is new and has plenty of RAM and HDD. I auto-accept upgrades including the most recent Firefox upgrade and the suggested upgrade to Adobe Flash 10.1. But after this, Firefox stopped working and does not work when I re-load Firefox 3.6. Also IE8 now works very slowly and does not locate major websites like Microsoft without a 'can't find the website message' and having to pressing Return a second time. When I do get to the Mozilla website and click on the button to try to download Firefox 3.6.6, I get this message "Oops! Internet Explorer could not find mozilla3.snt.utwente.nl". Can you help with what has gone wrong? As it stands, I can't use Firefox at all. Note: because Firefox did not work after the upgrade, I've downloaded the IE8 version of the Adobe Flash 10.1. What I really want is to be able to use both Firefox and IE8. But is this possible if they use different versions of Adobe Flash?
== This happened ==
Every time Firefox opened
== About 2-3 days ago ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; Tablet PC 2.0; .NET4.0C)I have been having the same problem as the original poster. After upgrading to Ffx 3.6.6, the program asks you to upgrade to Flash Player Plugin 10.1. I download and installed 10.1 only to find videos weren't loading.
In my case, the problem is the previous installation of Flash Player (9.0.47) was somehow messing things up. To fix this, because I already had Flash plugin 10.1 installed I had to uninstall 10.1 using the uninstaller from adobe and then manually remove any files related the old flash player plugin 9.0.47
Here is a run-down of my process:
0. To check if you have a previous installation of the Flash Plugin lurking around, in Firefox go to Tools -> Add-ons -> Plugins (tab). At this point you may seen both Flash plugins.
1. Proceed to uninstall Flash Plugin 10.1. Adobe provides an uninstaller here: http://kb2.adobe.com/cps/141/tn_14157.html
( you have to make sure you have nothing running when you execute the installer).
2. On my Mac (sorry I don't know what it is in Windows) I searched the hard drive for any files/folders with "Shockwave". I found a folder called "Shockwave 10". It wasn't removed by Adobe's uninstaller. For safety I deleted it and then emptied the trash.
3. I then went to My HD -> Library -> Internet Plugins.
Remove the file and folder named "Flash player.old"
4. Restarted; ran the Adobe Flash Player 10.1 installer. Restarted again.
5. Opened up ffx and double checked the plugins list (see step 1). Version 10.1 is installed and available. Went to problem sites to test it out and Success!
Hope this helps. -
A single report can't combine portrait and landscape oriented pages
Post Author: joelo2
CA Forum: Crystal Reports
Hi,
Can a single report in Crystal report XI (version 11.5.8.826) combine portriat and landscape oriented pages like Crystal report 2008? For example, I have one main report with several subreports in the main report. I want one subreport be in portrait page orientation and the other subreports in landscape. Can I do something like that in Crystal report XI version? I even tried writing a small .net program to do this, but it doesn't seem to allow me to do that programmatically either. Please helpPost Author: ngra
CA Forum: Crystal Reports
I'd like to elevate this issue with Crystal Reports XI. There is a critical application which we developed in-house which needs both portrait and landscape orientation in each of the 30,000 plus documents we are sending out every month.If developers in Business Objects are picking this thread up - we need a patch for this limitation - quick. Right now, we are toying with the possibility of exporting the documents into a text format with markers indicating if a page is portrait or landscape. This is to be loaded into a Xerox machine (which costs hundreds of thousands of dollars), where it is mapped automatically to portrait or landscape. Note to Business Objects: This will provide us and countless others with much value. Think 80/20 rule - most bang for your development bucks and value for your customers! -
Help with simple OS upgrade and backup questions for a dumb old previous PC user...?
Ok...have mercy on me, please...
I am not completely dumb, I know typical board etiquette, and I have searched for various answers (and found many)...but I just want to confirm my personal "research" and get all of this clear up before I proceed with this insanity. I know I could probably search more, but this is taking hours, because of all my various questions, one leads to 10 more...
I have an iMac with Mac OS X Version 10.5.8 (which, though not mentioned anywhere?...is apparently "Leopard", right? Told you I was dumb...)
Processor: 3.06 GHz Intel Core 2 Duo
Memory: 2 GB 800 MHz DDR2 SDRAM
My main goal: install an app that was in the Mac App store.
However, with Leopard, I can't access the Mac App store with Leopard, apparently.
I click on the Mac App store, and up pops up a Lion advertisement...telling me I should upgrade. Ok, fine...probably a good idea, anyway...
But how do you upgrade to Lion? Apparently through the Mac App store!
The web-redirects on the Apple site are amusing...taking me on an endless cycle...purchase Lion in the app store...click..."you need to upgrade to Lion"...OK...click..."you need Lion at the app store"...OK...click..."you need to upgrade to Lion to get to the app store"....etc.
OK...fine...google searches...ahh, I need to upgrade to Snow Leopard first, apparently! Yes?
(Maybe the Apple redirects should detect that I have Leopard, and direct me to a screen that explains that I must upgrade to Snow Leopard...and then Lion! Do you hear that, Apple? Thanks.)
Anyway...so here's my plan:
1) Upgrade to Snow Leopard
2) Access the Mac app store
3) Upgrade to Lion
Question A: With my iMac (specs above), is it really advisable for me to do this? Can my computer really handle Lion? It seems I barely meet the minimum with my intel core 2 Duo and 2 GB ram...yes? Is this a dumb idea, even if "OK"? I know that "minimum requirements" on a PC often meant: "Well, it will work...but it will be slower than a snail and crash if you run 5 programs at the same time" (which I usually do...) I don't want to upgrade if the "minimum" is really not enough.
Question B: If the answer to A is "not a good idea", then do I just need a new computer (i.e. better processor)? Or do I need more Ram? And can I add Ram to this computer, and is it relatively easy? I have added Ram to PCs tons of times, and you always have to determine type of Ram for your board, make sure they "match", or whatever, and then open up the machine and install. Kind of a pain, but once I have the "right" type of Ram, opening the CPU and installing is within my abilities. Will it be harder for a Mac?
= = =
Next:
When upgrading an OS on a Windows, you pretty much format the harddrive and start all over. Back in the day I was a PC user, there wasn't really a "great" way to back up programs and files, so this was a nightmare. You could NOT just back-up software. You typically had to re-purchase and install it all from scratch. Is this the same with Macs? Furthermore, personal files were scattered all over the hard-drive for the individual software...so trying to back all that up to get it back on the new system = nightmare! I hate PCs.
Anyway...so, my iMac has Time Machine. I am pretty ignorant about this, and based on my previous PC backup program nightmares, I have a distrust for it...and don't really understand how it works. But in any event, my external drive crashed a few months ago, and I haven't replaced it, yet. So, I am replacing it soon and will get Time Machine back up and running...setting it up again, etc...leading to question C...
Question C: When upgrading from Leopard to Snow Leopard to Lion, what is the best way to ensure I keep all my programs and files. My wife and I both access the computer, so two user accounts. Does Time Machine really do a good job backing up everything and all things? Is it just a matter of upgrade to Snow Leopard...then immediately to Lion...and then some sort of "Restore" from Time Machine? Anything for me to "watch out for"...or to do when I buy a new external hard-drive and setup up Time Machine for the first time on it, in order to make this work well? Will I have to re-install all the various applications I have installed on this thing? (like with PCs?)
Thanks for any sincere help.yachadhoo wrote:
I have an iMac with Mac OS X Version 10.5.8 (which, though not mentioned anywhere?...is apparently "Leopard", right? Told you I was dumb...)
Processor: 3.06 GHz Intel Core 2 Duo
Memory: 2 GB 800 MHz DDR2 SDRAM
Apple has discontinued support for 10.5, it's a plaque of our platform that Apple only supports the last two operating systems in circulation.
Where as on Windows you can run the same OS version for 10 years and get updates free (if not stolen), on a Mac we get one year, two tops now and if you don't upgrade and break all your third party software and hardware drivers in the process, then your denied security updates.
On top of that, the OS X upgrades tend to break your older hardware too, or slow it down so much that it drives you to want to buy newer hardware.
It's funny Apple places the AppStore on your OS X version along with iTunes and Safari updates, but then doens't supply necessary security updates, your machine may be compromised and here you enter vital credit card info, banking etc. thinking you have a secure machine.
My advice, since that's a 10.5 era Mac, is to upgrade to 10.6.3 via this disk, then use Software Update until clear. You'll get security updates and your present installed 10.5 software will work in 10.6 using Rosetta.
http://store.apple.com/us/product/MC573Z/A
Rosetta is not avaialble in 10.7 so it could be a lot of your software will no longer function
http://roaringapps.com/apps:table
I don't see the sense in you buying all new software for a machine that's at it's end of life stage.
You can buy software in the AppStore with 10.6.
Question A: With my iMac (specs above), is it really advisable for me to do this? Can my computer really handle Lion? It seems I barely meet the minimum with my intel core 2 Duo and 2 GB ram...yes?
You will need to buy 4GB of RAM to run Lion well, the 2GB is just a bare minimum, and your processor is a bit dated.
Lion 10.7 is certainly slower than Snow Leopard 10.6, in fact so many wanted to go back to Snow Leopard and one of the resons was Lion was slow.
So I wrote a User Tip, here, but the Tips were implemented only recently.
How to revert your Mac to Snow Leopard
Question B: If the answer to A is "not a good idea", then do I just need a new computer (i.e. better processor)? Or do I need more Ram? And can I add Ram to this computer, and is it relatively easy? I have added Ram to PCs tons of times, and you always have to determine type of Ram for your board, make sure they "match", or whatever, and then open up the machine and install. Kind of a pain, but once I have the "right" type of Ram, opening the CPU and installing is within my abilities. Will it be harder for a Mac?
RAM is easy, you can buy it at Otherworld Computing or Crucial.com and install it yourself, there is a little door under the monitor.
Videos online at YouTube.
When upgrading an OS on a Windows, you pretty much format the harddrive and start all over. Back in the day I was a PC user, there wasn't really a "great" way to back up programs and files, so this was a nightmare. You could NOT just back-up software. You typically had to re-purchase and install it all from scratch. Is this the same with Macs? Furthermore, personal files were scattered all over the hard-drive for the individual software...so trying to back all that up to get it back on the new system = nightmare! I hate PCs.
Mac'soperaing system is seperate, it can be replaced or upgraded indepentantly of programs or user accounts on the machine.
There are some programs that install a kernel extension file at boot into OS X, those get knocked out, but those can be replaced with a new install of the software.
You should always backup your users files as those can't be repalced.
Most commonly used backup methods explained
Question C: When upgrading from Leopard to Snow Leopard to Lion, what is the best way to ensure I keep all my programs and files.
OS X upgrades dont' affect User accounts but they can have a affect on programs installed, which most of your 10.5 programs likely will no longer work in 10.7
However they will (with a slight update) work in 10.6 just like before.
You need to backup regardless, I suggest a manual backup of users files to a storage drive, a 10.5 clone on another drive, the your ready to upgrade to 10.6
10.5 to 10.6 upgrade is rather painless, also 10.6 gives accelerated video drivers, so your machine will appear faster.
However once you install 10.7, you will slow down.
Does Time Machine really do a good job backing up everything and all things?
No, you shouldn't rely upon TM, have a multiple backup stragedy, TM files are hard to access directly.
Is it just a matter of upgrade to Snow Leopard...then immediately to Lion...and then some sort of "Restore" from Time Machine?
No need to restore, OS X upgrades and leaves everything else in place, just some programs (with 10.6) or a lot (with 10.7) when you try to launch them they will fail.
Also when you connect TM it will do a substancial change to reflect the new boot drive.
If you were using TM as a "storage drive" thinking you can use the archived versions later, that wil change upon the new OS X upgrade.
But in any event, my external drive crashed a few months ago, and I haven't replaced it, yet. So, I am replacing it soon and will get Time Machine back up and running...setting it up again, etc...leading to question C..
You need not only TM drive, but a bootable clone and user files on a storage drive.
Most commonly used backup methods explained
Will I have to re-install all the various applications I have installed on this thing? (like with PCs?)
No, depending upon what OS X version you stop at depends how many programs no longer work.
You will have to buy a lot of new or upgrade versions with 10.7, not so with 10.6 only updates mostly because of Rosetta on 10.6 and not on 10.7
My opinion, since that machine is a bit dated, is to upgrade to 10.6, Software update to 10.6.8, and stay there.
Later on 10.8 is being released after this summer, you may want to consider getting a new machine with 10.8 a few months later to ensure all the bugs are worked out of it.
Your not a comptuer savvy person, you like most Apple users expect your machine to "just work" I think going to 10.7 will be a bad experience for you.
10.6.8 will server your needs until 10.8 is released and on new hardware where Apple will hold your hand for free for three months, 3 years with AppleCare.
Your not a "OS X upgrader type of a person" and Apple needs to get of thier collective assets and pay better attention to it's most common users. -
Memory Upgrade and How do I add Bluetooth to S10-3
Hi,
Newbie here, just got my S10-3 last week and love it. I have upgrade to Windows 7 Pro and would like to increase the memory and add internal Bluetooth if possible. What type of memory card do I need to go to 2M? Lowest cost and brand/model number would be great information if you can provide it. Do you think it's possible to add Bluetooth internally? I know I can add using USB external, but would really like to keep it internal and keep all three USB ports free for other devices.
Thanks Much!!!
Solved!
Go to Solution.Re: Memory Upgrade and How do I add Bluetooth to S10-3[ New ]
04-05-2010 06:54 PM
Hi ssedqwick you solved Bluetooth?
Thx
EMERSON VIER
No, I have not. I think there is a connector for USB in the motherboard, but don't know for sure. Someone that works on the S10-3 will know the answer, so just have to wait and see if that person shows up. -
I'm trying to install Adobe Photoshop CS3 on a new ASUS ASM11BB001O computer equipped with 64-bit Windows 7. I use a "bundle" approach, first loading Photoshop 6, then upgrading with CS upgrade and then CS3 upgrade. The installation goes smoothly until I add PS CS, and then it balks at the "accept" Adobe conditions screen. I have two other (Gateway) computers with Windows 7, 64-bit, on both of which the PS-6, CS-CS3 pathway worked fine. Any thoughts on how to get this working? Thanks
If your goal is to install and activate CS5 there is no need to install anything preceding it. You will only need to have the serial number from the preceding version that you upgrade from (CS3 I guess).
Maybe you are looking for
-
Printing text on the back of each page
I have a question about printing on the "back" of each page. I am trying to create documents (like Purchase Orders, Order Acknowlegments, Invoices) that have Legal Terms and Conditions that need to print on the back of each printed page(so it needs t
-
How to ignore a variable defined in a query when the query gets executed
Hi SAP guru, I am creating a query, which has a user input variable, say A, and a replacement path variable, say B, Bu2019s value is determined by A and the whole purpose of A is letting user entering an initial value and A must be ignored when the q
-
Shaking gently my Iphone 4 i can hear a little sound as like a screw Shaki
Shaking gently my Iphone 4 i can hear a little sound as like a screw, what can i do ???
-
How to bind local variables in complex query in PL/SQL
Hi I have long complex query with local varibales; when I run in Dynamic SQL I get an error. Not sure which is the easiest way to bind local variables. L_QUERY := q'[select m.segment1 col1, '1' col2, '13' col3, l.operand col4,
-
HT201077 An error occurred while joining this photo stream. Please try again later.
Why am I getting this error message? An error occurred while joining this photo stream. Please try again later.