BIC Code in bank master for SEPA requirements

Hello experrts,
we are currently running R/3 4.7 and I have a question regarding the maintenance of BIC code in bank master data. From next year on, payments inside Europe can/will be made according to SEPA requirements. One requirement is to provide the BIC code and IBAN for the tayment transfer.
Now in bank master data there is already a field for SWIFT code. Is it enough to maintain SWIFT? Because there is no separate field for BIC. Will the SWIFT flow into the payment document and represent the BIC?
In short words: Is SWIFT = BIC?

Hello,
how are you, iam also implementing SEPA .
if you done with SEPA please suggest me how to proceed from starting to end steps.
waiting for your reply.
Best Regards
Damodar

Similar Messages

Bank Master - Defining of Overdraft Limit

Dear Gurus
In the Bank Master for a Cash Credit Account, is there any way to define the Overdraft limit availed from the Bank so that at the time of posting of transactions the same can be controlled by way of a warning or error message?
If not in the Bank master, then is there any other way to achieve this.
Regards
Abhishek Kumar

Dear All
Request you to share your knowledge on the subject matter.
Regards
Abhishek

BIC code for International bank transfers

Could someone tell me if in SAP exsist a database of BIC code for International bank transfers?
Thanks

Hi Umberto Gandalf,
you find the BIC codes in table BNKA - it's called SWIFT there.
Regards,
Jörg Racz

What the setting required in vendor master for Intercompany or intracompany

What the setting required in vendor master for Intercompany or intracompany orders
Thanks,
Kiran

Hi,
For the inter company STO scenario
Create a vendor for the company code of receiving plant, using account group :0007 Assign this vendor to Delivering plant
in the Purchasing view>Extras>Add. Purchasing data>Plant.
Also create an internal customer for the supplying sales area and assign it to the vendor, it helps in determining the Shipping point.

Please provide the abap code for this requirement

note : if the below mentioned user exit is not suitable please find the suitable user exit and provide the code for this requirement.
     The User-exit MEFLD004 is only to be used at PO level (ME21N/ME22N).
     When PO is create or changed (ekko-ebeln) user exit MEFLD004 is triggered which check for the business requirement of the PO check for PO doc types (ekko-bsart) :z4,z6,z11,z12 from the table ekko and Account Assignment Category (knttp) is either N or K then stock process follows.
     When an PO is cancelled, all entries will have to be reversed
     The Buffer table for the PO will have the following fields:
Purchase order Number                     EKKO-EBELN
Line item number of the PO               EKPO-EBELP
Vendor Number                                  EKKO-LIFNR
PO Quantity                                        EKPO-MENGE
PO Nett Price                                     EKPO-NETPR
Base Unit of Measure                  EKPO-LMEIN
Account Assignment Category          EKPO-KNTTP
PO Doc type                       EKPO-BSART
Plant                            EKPO-WERKS
Purchase Org                                  EKKO-EKORG
Purchase Group                    EKKO-EKGRP
Company code                                EKPO-WAERS
Item category                     EKPO-PSTYP
PO Doc Date                     EKKO-BEDAT
     No duplications are allowed for any created, changed or cancelled purchase orders. If such a case occurs, the record will be updated with the latest update time stamp. This custom table will be keyed by purchase order number.

Cross-post: http://forum.java.sun.com/thread.jspa?threadID=763485

One Bank account for Multiple company codes

Hello, Is it posible to have one Bank account assigned to mulitiple company codes ??
isn't it be a problem when we do BAI reconciliation.
Becuase all we get from bank is bank account number and transactions, and how reconciliation works in this situation if we had mulitiple company codes assigned to same bank account number.
Can you please suggest me, if this is possible at all.(assigned to mulitiple company codes).
Thankyou.

Hi. For bank statement configuration you can only assign one bank account to one company code as mentioned by Akhil. The scenario you've described above is a pay-on-behalf process. If your payments are through AP, you create the bank account in the true legal entity and then when you configure the Company Codes (x,y, and z) in F110 payment program, then you set the Paying Company Code to be entity A. You don't need to configure the bank account in company codes x, y and z. When you run the AP payments, the system will know to check company A for the banking details. You will also be establishing an intercompany relationship with this so you would need OBYA setup as well. However, if you are trying to process payment requests, I do not think that the program adheres to this piece of config. It'll try to find the bank account in the respective company code's config. So sometimes in-house cash is implemented to this. hope that helps a bit.

Using Same Bank Account for two different company code

Can we use the same bank account number and ABA key for two different company codes? Both the company codes are in USA and with the same currency.
Scenario is to separate one division of the company code to a separate company code. Client wanted to know if we can use the same bank account so that they dont have to open another bank account

The system will allow the same ABA and bank account on two different company codes. However, if you use electronic bank statement (EBS) functionality (or plan to use it in the future), you will not be able to import bank statements for the account if it exists on two company codes. The EBS program uses the house bank/account ID tables to assign a company code to the bank statement. If the account exists for more than one company code, the program cannot assign a company code and it will give an error.
Regards,
Shannon

I WANT TO CODE DEMO FOR THSESE REQUIREMENT

Pending Purchase Order Requirement Specification:
Fields on selection screen (input screen) : Vendor Code From to , Period From to , Material Code from to.
Field in the output List : P.O. No, PO Date , Vendor Name , Vendor code, Material Code , Material Description , PO Qty, Qty received , Balance Qty.
THANKS N REGARD
JATIN SINGHAL

Hi jatin,
For your requirement you have SD standard program available.if you go to transaction VF03 and give any billing document no. click"billing document at the top"=>issue output to=>screen..
you'll get a standard program print preview..
check the programs corresponding to it by system=> status=>program name..
u can copy that program and make alterations necessary..
if u want to proceed with ur customized reports...
these standard programs will help u in finind the exact variables from where u wannt to pull out the data for PO no,POdate,Vendor No... etc
thanks
Jegadesh

Bank master and company code

hi all,
can u tell me how to find out which bank from table BNKA belongs to which company code,
Regards,
Tarun Bahal

T001 does not contain details of bank master......... but i sit linked with chart of accounts........
please explain where to find details o fchart of accounts in such case.
Regards,
Tarun

Bank details for sales invoice

Dear Sirs,
I need to change bank details for c.code "X" and when I create invoice with vf01 the system to print in print form new bank details (IBAN, SWIFT, bank name). Please give me whith which transaction I have to do it.
Thank you in advance.
Regards,
Dani
Edited by: Daniela Vaskova Petkova on Sep 29, 2009 3:43 PM

the system to print in print form new bank details
Not sure whether your requirement is store the new bank details in billing document itself or just to fetch the changed data only to printing.
If your requirement is first one, that new bank details to flow in billing document, then try creating VF01 after changing the same in Customer Master of respective Payer. If I am correct, system will consider from master data.
On the other hand, if your requirement is second one, then take the help of ABAPer and achieve the requirement.
thanks
G. Lakshmipathi

Vendor Master and Customer Master for FI AP/AR

hi FICO Gurus,
I am Sapna here and I have questions regarding the Mandatory fields for Vendor Master and Customer Master which would be mandatory for Running FI AP and AR. I am basically a MM Consultant but I have been asked to perform this role of Master Data at my current client.
I am quite familiar with the fact that these feilds are based on the needs of the bussiness and can be configured in IMG as required/optional or suppressed or diaplsy only.
What I am looking is
1. Are there any fileds list which is <b>Mandatory</b> for running FI AP/AR in global financial implemntation.
2. Also from FI Perspective what is <b>Good to have/Recommended fields</b> in Vendor Master and Cusotmer Master for Global Finacial implemtation.
Your help is greatly appreciated. Please point me in right direction...

OK all implementations are different so the client should have some imput here.
However you need to make sure certain address details are mandatory such as name, post code street and city.
You may always want an e mail address or phone number.
All AR & AP customer/ Vendors will need a recon account, so it is important there is one set up, but you also need to make sure in change mode this cannot be changed.
For Vendors you will require some kind of bank details and payment method.
For Customers if Dunning is being used you may need the Dunning Procedure and Accounting Clerk.
Also for a Customer there is the Sales Org view, and it is best to contact the SD consultant to see which fields are required here. The tax code, payment terms are normally mandatory.
For the Purchasing Org, I guess you would know about this...
Hope this helps.
Award points if useful.

Need to add a field for SEPA DME file format

Hi SAP Gurus,
I am working XML DME file format, i configured every thing properly But i am not able to Map below requirement
I have to bring Client ID(GATTGB22@|@) as a first field in file then only bank can process
This requirement we have to map this some where other than DMEE T. Code
Kindly Guide me on this
Client required Below file format
*GATTGB22@|@<?*xml version="1.0"; encoding="utf-8"?>
<Document xmlns='xmlns="namespaceURI"' xmlns:xsi="www.XXXXXXXXX.com"; xsi:schemaLocation="C:\Documents and Settings\xxxxxxxxxx.CORP\Desktop\SEPA.txt";>
<pain.001.001.02>;
<GrpHdr>
<MsgId>1000004409B</MsgId>
<CreDtTm>2011-04-06T11:11:50</CreDtTm>
<NbOfTxs>2</NbOfTxs>
<CtrlSum>2000.00;/CtrlSum>
<Grpg>MIXD</Grpg>
<InitgPty>
Now i am getting in below format
<?xml version="1.0"; encoding="utf-8"?>
<Document xmlns='xmlns="namespaceURI"' xmlns:xsi="www.XXXXXXXXXXx.Com"; xsi:schemaLocation="C:\Documents and Settings\XXXXXXXXX.CORP\Desktop\SEPA.txt";>
<pain.001.001.02>;
<GrpHdr>
<MsgId>1000004409B</MsgId>
<CreDtTm>2011-04-06T11:11:50</CreDtTm>
<NbOfTxs>2</NbOfTxs>
<CtrlSum>2000.00;/CtrlSum>
<Grpg>MIXD</Grpg>
<InitgPty>
Thanks in advance

Hi,
check these enhancements
COPA0001 Enhancement for derivation in Profitability Analysis (C
COPA0002 Enhancement for valuation in Profitability Analysis (CO
COPA0003 Enhancement for assignment to profitability segment (CO
COPA0004 Enhancement for currency translation (CO-PA)
COPA0005 Enhancement for actual data update (CO-PA)
COPA0006 Enhancement for planning (CO-PA)
COPA0007 Enhancement for external data transfer (CO-PA)
i think you should get it provided you should follow proper procedure .
otherwise you need to create Implicit Enhancement spot.
regards
fareed

BSR code on TDS Certificate for Customer and vendor in india

Hi
We have a requirement to print BSR code on TDS Certificates for customer and Vendor in india.
Currently the BSR code for Customer TDS certificates picked up from Bank branch ( BNKA-BRNCH ) field and
for vendor TDS certificates picked up from Bank Key field.
There is a 3rd party sowtware running monthly to update the BNKA table. so we are not following the standard process and we are implemented another options to picked up the BSR code for TDS certificate printing on Vendor/Customers.
For Vendor TDS certificate, we implemented SAP notes 1299729 & 1338645
to print the BSR code from Tax Number1 (T012-STCD1) field and it is working fine.
For customer TDS certificate also we want program to pickup BSR code
from Tax Number1 (T012-STCD1) field
Please let me know is there any other SAP correction Notes avalible to print the BSR code on Customer TDS certificates from Tax Number1 (T012-STCD1) field.
Thanks
Risha

answews

Bank Master Data ( Creation of new Account )....

Dear SAP Gurus,
Good morning to all,i have one doubt regarding creating a new Bank Master Data in Production, please help me.My user has a requirement which is like one Cash Credit Account has been opened with SBI bank where with the same bank and branch there is already an existing Current Account,now my client wants from me to create a bank master data for the new bank Cash Credit Account( as he is saying that he has to maintain BRS).
Now i have to know that what is the best practice in sap whether i should create one more master data for the new Account or i should attach the new account with the existing Bank Master?
Please help it is urgent.I'll be waiting for your valuable suggestion.
Regards
Rajiv Kapur

Hi Rajiv,
Creation of new house bank will not serve purpose in better way, it is only required when there is a complext scenatio in check printing but that does not appear in your case.
So, create a new Bank Account in the existing House Bank, this will be included in Bank Reconciliation. Moreover, creation of Bank account instead of House Bank will also ease some maintainance in Bank Reconciliation statement configuration.
Regards,
Chintan Joshi

New company code configuaration is added for the existing company

Hi Guru's
New Company Code is to configure for the existing company. Already we 20 company codes.
Now Business users want new code for the country australia.
Please let me know what are the steps to configure the new company code.
I appreciate your help and coperation.
Regards
Jenny

Hi jenneyc,
1.1 Define and Assign Company Code
1.1.3 Assign Company Code to Controlling Area
1.1.4 Create new plant
1.1.5 Define and Assign Sales Organization
1.1.5.1 Copy Sales Organization
1.1.5.2 Change name and address of Sales Organization
1.1.5.3 Assign Sales Organization to Company Code
1.1.5.4 Assign Sales Organization ‑ Distribution Channel ‑ to Plant
1.1.6 Delete Purchasing Organization assignment to Company Code
1.1.7 Define Variants for Open Posting Periods
1.1.8 Open and Close Posting Periods
1.1.9 Assign Posting Period Variants to Company Code
1.1.10 Create Number Ranges for document posting for company code
1.1.11 Asset Accounting - Specify Number Assignment Across Company Codes
1.1.12 Creation of House Bank and Bank accounts
1.1.12.1 Define House Banks
1.1.12.2 Define Lockboxes for House Banks
1.1.12.3 Define Posting Data
1.1.12.4 Set Up Payment Methods per Company Code for Payment Transactions
1.1.12.5 Set Up Bank Determination for Payment Transactions
1.1.12.6 Create Check Lots
1.1.12.7 Create Program Variants for RFFOUS_C
Along with above we need to do LSMW for GL a/c company code data have to upload, and foreign currency Configuration require...!
I hope this info will helpful to you..!
Rds,
ANil

BIC Code in bank master for SEPA requirements

Similar Messages

Maybe you are looking for