'BISystemUser' was authenticated but could not be located within the Ident

Hi All,
Getting above error after server restarts....
Not able to login to Analytics page but EM and WLS console logins are fine...
please help!

Had to configure/remove some entries from LDAP file..

Similar Messages

Updating my Win7 to 12.1, I get 'iTunes was not installed correctly Error 7 (Windows error 127). If I try to launch, I get 'The procedure entry point "CMBlockBufferCopyDataBytes" could not be located in the dynamic link library CoreMedia.dll'. Help!

Windows version 7. Auto update of iTunes to version 12.1 from 12.0.1.
At end of install process, message 'iTunes was not installed correctly. Error 7 (Windows error 127).
Tried to launch iTunes, anyway, but immediately got message 'The procedure entry point "CMBlockBufferCopyDataBytes" could not be located in the dynamic link library CoreMedia.dll'.
Tried downloading iTunes and updating manually - get exactly the same result.
No problem using iTunes before this.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The error hints at a similar pattern to those discussed in the first and third boxes of the user tip, suggesting that you've got an outdated .dll file that needs replacing. You should find CoreMedia.dll in the one of the following folders:
C:\Program Files\Common Files\Apple\Mobile Device Support
C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
Delete it and then repair Apple Mobile Device Support from the Programs and Features control panel. If that doesn't work go for the full tear down and rebuild.
tt2

Was trying to update my ITunes and get this error: The procedure entry point AVCFPlayerItemDurationChangedNotification could not be located in the dynamic link library AVFoundationCF.dll. Just got the new IPhone and am trying to share music files. Can any

I have Windows Vista computer. I am trying to upgrade my ITunes so can share files with other home computer. (Just got the new IPhone). I get this system error: The procedure entry point AVCFPlayerItemDurationChangedNotification could not be located in the dynamic link library AVFoundationCF.dll. Tries system restore and redownloaded...NOW Itunes will not even open. Can anyone help?

I uninstalled Apple Application Support, opened iTunesSetup with WinRar, and went down the list of msi's. AppleApplicationSupport was an install, all the others I did Repair. Did not have to reboot. Works okay now.
HTH

HT1926 THE PROCEDURE ENTRY POINT QTCF_CFHTTPMESSAGESETHEADERFIELDVALUE could not be located in the dynamic link library QTCF,dll i keep getting this since i tried to upload the latest itunes ,something got lost while i was installing it cause my electri

eversince i tried to upgrade my electric turned off and something got lost from my origional itunes now i cant uninstall or reinstall and keep getting the message QTCF_CFHTTPmessagesetheaderfieldvalue could not be located in the dynamic link library QTCF,dll. its driving me nuts can anyone help PLEASE

Many thanks.
Origionally i was receiving that some msi or nsi was missing and to insert my itunes disc which ive never had i tried to uninstall and kept on getting could not uninstall due to the folder not being found
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?

Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions for a non techy person?

See Troubleshooting issues with iTunes for Windows updates.
Try the repair tip in the third box first.
tt2

When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still

When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still persists. How can I fix it? thank you.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

When I start up the computer, the dialogue box opens and saying that the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I redownload itunes, but the problem still persists. How can I fix this?

When I start up the computer, the dialogue box opens and saying that the procedure entry point splite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll. I tried to fix this problem by redownloading itunes, but the problem still persists. How can I fix it? thank you.

With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
Reboot and see if all is well
In case that your OS is Windows 7 (64 bit)
1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
2. Copy file "SQLite3.dll"
3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
4. Paste file "SQLite3.dll" to the location.
5. Reboot your computer, it should not display that message, it should be clear.
Good Luck

Have several ringtones in my itune. while synchronising 2 errors appear.1. several objects could not be found,2. an iphone was found but could not be indentified. iph.4s was new reset, ios 6

have several ringtones in my itune. while synchronising 2 errors appear.1. several objects could not be found,2. an iphone was found but could not be indentified. iph.4s was new reset, ios 6

Hi Grant,
Here is what I did and so far seems it is wworking.
1. I deleted oDesk and ShareFile. I removed them using MacKeeper (I found this application very usefull for uninstalling applications as MacKeeper looks for them all over the computer: cache, preferences, application support etc.) While for oDesk is simple as I can look myself for oDesk in any file names, whith ShareFile was a little tricky to amke it amnually as MacKeeper find files that contain Citrix name then ShareFile. I will not guess unless I would search the internet on how to manually remove sharefile from my system.
2. I manually delete all cahe files and folders from ~Library and ~User/Library.
3. After reboot I installed Onyx and order maintanance where I checked all its options, including but not limited to DNS caches, fonts caches, everything.
4. After I reboot computer, I went in Disk Utility and Repaired permissions.
Reboot again. Now seems to work fine. At least odesk Team is working properly. I will have a second thought for installing ShareFile.
Some romanian mac users suggested to check my router connectivity and change some DNS in it. Looks like that was also a problem on some MACs. I recall the few weeks ago I had an issue with TP Link router. My computer wasn't connected to internet, though router showed that there is internet connection. I ping router from my computer and I received answer from ping. I ping google from computer, nothing. I ping google from router, was wroking. I connected the computer directly to internet without router, was wroking. When connected back through router, nothing. I contacted the guys from TP Link and they suggested to use google DNS instead of those my ISP provided. But since then I had not experienced any issue with router and internet, until now. The DNS are still those from google.
I will keep you updated if any issues are appear again. So far, it is working perfectly as it supposed to work.
Warm regards,
Sebastian

AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not be located in the dynamic link library AVFoundationCF.dll. I have deleted and rein-staled 5 times, but getting same message..........HELP!!!!!!!!!!!!!!!!!!!PLEASE!!!!!!!!!!!!!!!!!!!!!!!

Hello,
         I dumped Itunes and QuikTime, tried to reload ( 4 Times) but keep getting the same error message.
                      ENTRY POINT NOT FOUND
      The procedure entry point
AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey could not be located in the dynamic link library AVFoundationCF.dll.
                       HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!           PLEASE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Hi, Did you strip out all components, delete the named folders and reboot as in the second box of Troubleshooting issues with iTunes for Windows updates?
Checking on my computer here (Windows XP SP3 32 bit) I have one copy of iAdCore.dll in the main \Program Files\iTunes folder with the following properties:
Size 3,004 KB
Created 8th May 2014
Modified 8th May 2014
File Version 1.0.0.1
Product Version 1.0.0.1
I'll try to get a look at 64-bit system later to confirm the correct path.
tt2

Help! I keep getting the following message: the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

Hi,
Since downloading the updated version of itunes around May this year I have had the following problems:
1. This error message appears when my windows account launches:
the procdure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.
2. I can't play any of the files in my itunes library. An error message appears indicating it can't find the files.
3. When I plugged my iphone in to update it was corrupted and I have lost all 7000 + songs.
You can guess that I am not a very happy bunny with itunes at the moment!
Please, can anyone suggest how to sort this lot out. I am aware that I've probably lost the ipod songs, but I need to get rid of the error message and be able to play the songs on from my library. I've been without since May now and I'm wondering whether to even bother getting it sorted, but I have quite a few albums purchased on itunes that I don't want to lose!
Thank you for your time.
Michelle

Thank you. I'm going to investigate saving my itunes library to the icloud and then re-trying the Stellar Phoenix recovery now the error messages have gone. If the Stellar doesn't work then I will try the advice in your link. I really appreicate the help you've given me - at least I have my itunes library back! I'm kind of resigned to re-loading my CDs back on - something to keep my busy in the winter months!
I'll let you know how I get on, but it will probably be a few days.I'm not very technical so I have to wait for my husband to get in from work to help me with this side of things. He's been busy working on the Olympics, so I he hasn't had much spare time for a while!
Michelle

Error messages - DDE Server Windows itunes.exe - Entry point Not found and iTunesHelper.exe - The procedure entry point asl_add_log_file could not be located in the dynamic link Library ASL.dll

Hi
I have tried to research these problems I am getting, but have not been able to resolve them.
1st is the above DDE Server Windows iTunes.exe - entry point not found.
This only occurs when I try to start iTunes.
if I click ok , several times, iTunes will start but slowly.
If at any time I have to reboot my computer I get
iTunesHelper.exe - the procedure entry point asl_add_log_file could not be located in the dynamic link library ASL.dll
if I click 3 times OK it goes away.
To this end I have uninstalled iTunes and rebooted my machine then gone to iTunes web site and downloaded the latest version.
Installing it but still get the same errors on reboot and trying to run iTunes
Anyone any ideas please.
I have a self build PC it has an Intel core 2 quad Q6000 @ 2.40GHz
Ram 4.00GB
32bit OS
Windows 7 Ultimate SP1
Firewall - Zonealarm
Virus - Zonealarm
Thanks in advance
Steve
Message was edited by: Ybslik
Message was edited by: Ybslik

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

When I start my computer the following error: AppleSyncNotifier.exe Entry Point Not Found Procedure entry point xmlTextReaderName could not be located in the dynamic link library libxml2.dll

After updating to iTunes version 10.5, every time I start the computer the following error message appears: AppleSyncNotifier.exe - Entry Point Not Found. Procedure entry point xmlTextReaderName could not be located in the dynamic link library libxml2.dll? Please help

Thank you Allan123.
I have used iTunes 10.5.1 for a while without any problem but the other day I installed an application that wanted to restart my computer and iTunes did probably not shut down properly which probably caused the problems. I had to search for libxml2.dll though. Two other programs on my PC used a with the same name but I copied the one from the an Apple folder of course and pasted it where u suggested and after that everything was fine. I have no idea why this problem really occured without any real reason. But thanks for the solution!

Skge_sign_fr could not be located in the dynamic link library orageneric11.

Hi Guyz,
I am using Oracle 11.1.0 on Windows 2003 R2 Server, there was no problem. I tried to install Oracle 10g Grid Control and after that tried to configure Oracle Gateway 11g on the same Oracle_home. But unfortunately both installations were failed. Enterprise manager service also failed.
Now I am unable to connect to sqlplus and following error displayed.
" The procedure entry point skge_sign_fr could not be located in the dynamic link library orageneric11.dll. "
Please help me to resolve the issue.
Regards,
Rizi

10g Grid Control and 11g Gateway into the SAME Oracle_Home? The message states clearly there's a version mismatch (10g objects in a 11g home). Deinstall completely and then reinstall - following strictly the installation guides.

The procedure entry point NSSUTIL_EscapeSize could not be located in the dynamic link library nssutil3.dll

Windows XP with Firefox 18.0.1 wont open when upgraded to latest version.
Error messages were
(1) the procedure entry point PR_SetCurrentThreadName could not be located in the dynamic link library ndpr4.dll (2) the procedure entry point NSSUTIL_EscapeSize could not be located in the dynamic link library nssutil3.dll (3) could not load XPCOM
Ran malware & virus software then removed Firefox via Control panel, then residual folder from Programme files folder and from C:\Documents&Settings\Administrator\Local Folders\ApplicationData\Mozilla.
Sourced & installed ndpr4.dl and nssutil3.dll - fresh reinstall firefox several times - this got rid of error message 1 but not 2 or 3 and still can't open Firefox.
Any solutions?

I have this problem and I am using Zone Alarm Extreme Security with Force Field enabled. I found that by clearing the Virtual Cache in Zone Alarm that this problem went away and was able to run firefox again.
Here is a post I found that addresses the issue sort of. [http://kb.mozillazine.org/Browser_will_not_start_up#Firefox_does_not_start_after_updating_with_ZoneAlarm_ForceField_enabled http://kb.mozillazine.org/Browser_will_not_start_up#Firefox_does_not_start_after_updating_with_ZoneAlarm_ForceField_enabled]

The procedure entry point QTCF_CFHTTPMessageSetHeaderFieldValue could not be located in the dynamic link library QTCF.dll.

The procedure entry point QTCF_CFHTTPMessageSetHeaderFieldValue could not be located in the dynamic link library QTCF.dll.
I installed iTunes, then quicktime. After I installed quicktime, I began seeing this pop up everytime I opened iTunes.
iTunes works, this just appears everytime I open it.
I completely uninstalled every apple software on my laptop, then reinstalled everything.
Nothing happened, still the same.
Windows 7
64Bit

Hi,
I have exactly the same problem as the OP. To answer some questions:
I only have one copy of QTCF.dll.
It is in the correct place.
I have deleted it and repaired QT to replace it several times.
I have tried different versions of QT.
Win 7 Pro 64
I ran SysInternals MS Process Monitor to see what was going on. All programs which call this DLL were looking for it in their root directory, which suggested to me that the registry entry was either missing or corrupt, so...
I ran Regsvr32 on the dll and received the following Windows message:
"The module "qtcf.dll" was loaded but the entry-point DllUnregisterServer was not found. Make sure that the "qtcf.dll" is a valid dll or OCX file and then try again"
Now I'm out of ideas.
Cheers,
Tony

'BISystemUser' was authenticated but could not be located within the Ident

Similar Messages

Maybe you are looking for