Error messages - DDE Server Windows itunes.exe - Entry point Not found and iTunesHelper.exe - The procedure entry point asl_add_log_file could not be located in the dynamic link Library ASL.dll

Hi
        I have tried to research these problems I am getting, but have not been able to resolve them.
1st is the above DDE Server Windows iTunes.exe - entry point not found.
This only occurs when I try to start iTunes.
if I click ok , several times, iTunes will start but slowly.
If at any time I have to reboot my computer I get
iTunesHelper.exe - the procedure entry point asl_add_log_file could not be located in the dynamic link library ASL.dll
if I click 3 times OK it goes away.
To this end I have uninstalled iTunes and rebooted my machine then gone to iTunes web site and downloaded the latest version.
Installing it but still get the same errors on reboot and trying to run iTunes
Anyone any ideas please.
I have a self build PC it has an Intel core 2 quad Q6000 @ 2.40GHz
Ram 4.00GB
32bit OS
Windows 7 Ultimate SP1
Firewall - Zonealarm
Virus   -  Zonealarm
Thanks in advance
Steve
Message was edited by: Ybslik
Message was edited by: Ybslik

Taken at face value, you're having trouble with an Apple Application Support program file there. (Apple Application Support is where single copies of program files used by multiple different Apple programs are kept.)
Let's try something relatively simple first. Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "Apple Application Support" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "Apple Application Support", click "Change" and then click "Repair".
If no joy after that, try the more rigorous uninstall/reinstall procedure from the following post. (If you've got XP, although the procedure is for Vista and 7, just read "Computer" as "My Computer", read "Uninstall a program control panel" as "Add or Remove programs control panel" and assume the system is 32-bit, and you'll be doing the right things.)
Re: I recently updated to vista service pack 2 and I updated to itunes 10.2.1 and ever

Similar Messages

  • Error message - "entry point not found - asl_add_log_file could not be located in the dynamic link library ASL.dll". Does anyone have a clue how this can be fixed? I am running iTunes 9.  Thank you.

    I get this message when I start up my computer and when I try to open itunes.  After a couple of clicks to cancel the message, all programmes still open.  I've run a registry checker to no avail.  I also cannot find the ASL.dll on my computer either.  Any ideas?

    Read Hi, just tried to upgrade to 11.2 but now when I try to open itunes I get an error message saying "the procedure entry point ADiAdID_acquirematchslotifnecessary could not be located in the dynamic link library iAdCore.dll". Any suggestions?

  • I am having trouble updating the operating system on both my ipad and iphone. I get a strange message when I open my PC desk top that says "the procedure entry point sqlit3_wal-checkpoint could not be located in teh dynamic link library SQLite3.dll"

    I am having trouble updating my operatI am having trouble updating the operating system on both my ipad and iphone. I get a strange message when I open my PC desk top that says "the procedure entry point sqlit3_wal-checkpoint could not be located in the dynamic link library SQLite3.dll"  Any ideas what my problem is?

    Hi whatsthe77,
    Welcome to Apple Support Communities.
    You may want to follow the steps in this article to reinstall iTunes:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    http://support.apple.com/kb/HT1923
    Have a great day,
    Jeremy

  • How to solve DDE server window: itunes.exe-bad image on windows vista itunes 10.2.1.1

    i got this message DDE server window: itunes.exe-bad image every time when i tried to open itunes, safary, QuickTime Player  this happened when I updated itunes.

    Which particular file are the messages complaining about, rock? (Precise spelling, please.)

  • DDE Server Windows: iTunes.exe - Entry Point Not Found

    Windows 7 Home Premium
    When I start iTunes I get this error.  I click OK 4 times and iTunes starts and works OK.
    DDE Server Windows: iTunes.exe - Entry Point Not Found
    The procedure entry point QTCF_CFHTTPMessageSetHeaderFieldValue could not be located in the dynamic link library QTCF.dll.
    I reinstalled iTunes 10.5.3.3 and selected the repair option.  Same error.
    I reinstalled QuickTime 7.7.1 (1680.42) and selected the repair option.  Same error.

    Peculiar. I don't think iTunes versions 10.5.x need a QTCF.dll to launch. So something odd is afoot.
    Can you check something for me? Do a search of your C drive for QTCF.dll. How many copies do you find, and what is their location?
    On a 32-bit system, the standard location is:
    C:\Program files\QuickTime\QTSystem\
    On a 64-bit system, the standard location is:
    C:\Program files (x86)\QuickTime\QTSystem\

  • DDE server window; itune.exe-application error

    Can t open itune: DDe server window: itune.exe-application error. Then, instruction at 0x6d561040 memory could not be read.  P.S.: the code change every time i click ok.

    I do not know the answer to this, but if you are willing to to do some troubleshooting:
    Which version of windows are you using?
    XP vista or 7, 64 bit or 32 bit.
    Do you have Quicktime? If so does Quicktime launch?
    Did you change anything on your computer just before this problem started?
    Please look in the Event viewer for a helpful error message.
    To open the event viewer:
    Control Panel>>Administrative Tools>>Event Viewer
    Or type Event Viewer into the search box.
    Then select Windows Logs>>Application
    Open the Event viewer immediately after iTunes crashes.
    The error message should be at or near the top.
    Double click on it to open more information and press copy.
    Paste the result into your post.
    You are looking for a message starting something like this:
    Problem Event Name: APPCRASH
    Application Name: iTunes.exe
    Application Version: 10.2.1.1
    Application Timestamp: 4d756476
    Fault Module Name: iTunes.dll

  • DDE Server Windows; iTunes.exe 0x089c1040 such memory cannot be "written"

    downloaded and executed iTunes,
    iTunes Software License Agreement, after "agree".
    Error Prompt appear:
    DDE Server Windows: iTunes.exe
    "0x089c1040" reference internal memory. Such Internal memory cannot be "written"
    After "confirm"
    error message disappear but nothing happen,
    Your advice of what's next will be greatly appreciate.

    Hey back!
    I found out how to solve it
    i just needed to install the new quicktime version xD
    now everything is perfect !^^
    but thanks to all who read it!
    greetings, wajakla123!

  • Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help!

    Downloaded new version itunes to Windows 7, now receiving error while computer is booting Apple Sync Notifier.exe- Entry Point Not Found the procedure entry point sqlite3_wal_checkpoint could not be located in the dynamic link library SQLite.dll., Help! How do I remove this message every time I start up Windows? Would it help to
    re-install Itunes and what version??

    Refer to this thread - https://discussions.apple.com/message/15685210#15685210
    Quick answer "copy the file SQLite3.dll from the C:\Program Files (x86)\Common Files\Apple\Apple Application Support folder to the C:\Program Files (x86)\Common Files\Apple\Mobile Device Support folder"

  • When I turn on my computer,an error message says  "AppleSyncNotifier.exe-entry point not found The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll". Can't access itunes store,sync,buy etc. Help...

    When I turn on my computer, an error message says "AppleSyncNotifier.exe-entry point not found. The procedure entry point xmlTextReaderConstName could not be located in the dynamic link library libxml2.dll"  Cannot access itunes store, sync phone, etc. Two weeks ago did this and Apple support had me remove and reinstall iTunes. Doing it again. Help....

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the libmxl2.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Reboot and see if all is well
    In case that your OS is Windows 7 (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "libxml2.dll"
    3. Open new windows explorer, to to location C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Paste file "libxml2.dll" to the location.
    5. Reboot your computer, it should not display that message, it should be clear.
    Good Luck

  • My problem is on my Windows PC.  I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.  I am told this is related to iTunes.  Any help?

    I use both a Mac and a PC.  My problem is on my Windows 7 PC.  I am getting the error message, "The procedure entry point sqlite_3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.  I am told this is related to iTunes.  Any help out there?  Thanks

    With Windows Explorer, navigate to your C:\Program Files\Common Files\Apple\Apple Application Support folder.
    Copy the SQLite3.dll that you should find there, navigate to the nearby Mobile Device Support folder, and Paste it in there also.
    Restart the programme all should be well
    In case that your OS is (64 bit)
    1. Open windows explorer, go to location C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    2. Copy file "SQLite3.dll"
    3. Now paste it in the folder  C:\Program Files (x86)\Common Files\Apple\Mobile Device Support
    4. Restart the programme, it should not display that message, it should be clear.
    Good Luck

  • When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.

    When I try to start iTunes I get the following error message: Itunes.exe – Entry Point Not Found - The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library CoreMedia.dll.

    Any answers how to fix it? All Im getting is error for the past 3 days!

  • HT1349 my itunes on my laptop (not a mac) has an error message that reads "the procedure entry point_objc_load_image could not be located in the dynamic link library.objc.dll"  then another window will come up telling to to uninstall the apple mobile and

    my itunes on my laptop (not a mac) has an error message that reads "the procedure entry point_objc_load_image could not be located in the dynamic link library.objc.dll"  then another window will come up telling to to uninstall the apple mobile and itunes and reinstall them?  will this delete everythin in the itunes account?  please help

    This might help https://discussions.apple.com/thread/5821701

  • DDE Server Window: iTunes - error

    Updated iTunes to 10.5.2 and here you go the error window: DDE Server Window: iTunes. Tried to uninstall & install again, the error remains. Can anyone tell me how to deal with this?

    Hey back!
    I found out how to solve it
    i just needed to install the new quicktime version xD
    now everything is perfect !^^
    but thanks to all who read it!
    greetings, wajakla123!

  • "DDE server window: itunes.exe - corrupt disk " please help!!!

    i keep trying to oppen my itunes on my laptop (a dell inspiron with windows 7) and it keeps saying:  "DDE server window: itunes.exe - corrupt disk "
    also says  "the folder "iTunes" is on a locked disk or you do not have write permissions for this folder"
    i dont know anything about this kind of stuff i need detailled help please

    hi Hung Tang!
    hmmm. just to be on the safe side, please try searching for that file again, after having done this:
    Open "My computer". go to the Tools menu. Select "folder options ..." click the "view" tab. Make sure "Show hidden files and folders" is checked and "Hide extensions for known file types" is unchecked, like so:
    http://www.pixentral.com/show.php?pic=1yUGzJM0gRKQ8LtcizzwMSgXNb2u
    If the QT file still isn't showing up then, and the fix from that QTfW thread is still impossible to apply, then I think that a
    b clean
    uninstall then reinstall (with freshly downloaded itunes and ipod software) would be prudent. we want to try to try to get rid of any corrupted files (in either your itunes or quicktime set-ups).
    Da Gopha, "iTfW: stepwise clean uninstallation of iTunes", 09:51am Apr 5, 2005 CDT
    It would also be prudent to back up your music prior to doing this. we aren't going to be doing anything that would normally affect them, but it's best not to tempt fate.
    love, b

  • DDE server window:  iTunes.exe- No Disk

    When I open itunes I get this window that's labeled DDE Server Window: iTunes.exe-No Disk
    and it reads "There is no disk in the drive. Please insert a disk into drive \Device\Harddisk2\DR4"
    This happens with or without the ipod plugged in. I also have a USB hard drive. I don't know what's wrong.

    hi Hung Tang!
    hmmm. just to be on the safe side, please try searching for that file again, after having done this:
    Open "My computer". go to the Tools menu. Select "folder options ..." click the "view" tab. Make sure "Show hidden files and folders" is checked and "Hide extensions for known file types" is unchecked, like so:
    http://www.pixentral.com/show.php?pic=1yUGzJM0gRKQ8LtcizzwMSgXNb2u
    If the QT file still isn't showing up then, and the fix from that QTfW thread is still impossible to apply, then I think that a
    b clean
    uninstall then reinstall (with freshly downloaded itunes and ipod software) would be prudent. we want to try to try to get rid of any corrupted files (in either your itunes or quicktime set-ups).
    Da Gopha, "iTfW: stepwise clean uninstallation of iTunes", 09:51am Apr 5, 2005 CDT
    It would also be prudent to back up your music prior to doing this. we aren't going to be doing anything that would normally affect them, but it's best not to tempt fate.
    love, b

Maybe you are looking for

  • Accessing a File in a Java Mapping

    Hi, I am accessing one Random Access File through Java Mapping Program. This is working fine in Eclipse. But when I imported that jar file to IR, it is throwing FileNotFound Exception while trying to test through Interface Mapping. Actually it is not

  • Print Preview in CM14 after Edit BI Report not working; Advance print is

    I created a custom Form in BI Publisher for the Payment requisition Module. I have already imported it in CM14 Admin site so it does show up in CM14. I have also made this the default form for this group. After I edit the report format in RTF and upl

  • CMP bean : 'create' method fails - SQL Syntax error

    I'm using SilverStream 3.7.3 server on Win 2K. In a CMP entity bean, call to any create method ( default using primary key or with any other list of parameters ) fails , giving this error : javax.ejb.CreateException: [Microsoft][ODBC Microsoft Access

  • Default Image Rendition or resize image automatically

    We use the column Rollup Image and have the blob cache enabled to use image rendition. Is it possible to use this publishing image column with a default rendition (not full size) so the user has not to choose the rendition (or cannot choose it)? Or w

  • Downloading via Apple TV VERY slow

    Need help.  I have Apple TV linked to my TV and also Telstra Bigpond T-Box.   Problem: If I use Apple TV to RENT a movie ....  it takes HOURS to load before I can view it on my TV?  Don't know why this is happening as I can rent a movie via the T-BOX