BizTalk Configuration 2013 issue - Error in Group configuration
Hi,
I am configuring BizTalk 2013 in a Virtual machine and SQL server 2012 in another Virtual machine.
I have successfully configured the SSODB database. while configuring the Group's i am getting following error.
" exception of type System.EnterpriseServices.TransactionProxyException was thrown".
The following configuration was done already as a post installation steps.
1. MSTDC was enabled in SQL Server with XA transaction and all pre requiestee
2. Windows firewall was off in Both BizTalk and SQL Server . But we enabled the DTC In in BizTalk server and DTC out in SQL Server VM.
Do we need to check any configuration or what is the next step to proceed with the success ful configuration.
We are not able to identify the problem.
Regards, Aboorva Raja R Please remember to mark the replies as answers if they help and unmark them if they provide no help.
Hi Raja,
The issue what you see is a
well document DTC issue in BizTalk. DTCTester would be the tool to start with. Otherwise try the suggestions as suggested here in this MSDN article.
MSDN: Troubleshooting Problems with MSDTC.
this issue also occurs if you have not created SQL Alias to communicate with remote SQL Server using Non-Standard Port. Follow the steps documented in the following article to create a SQL Server Alias on the client machine to connect to SQL Server machine:
Steps required is in middle of this article, search for "Error Configuration Framework]Feature: [Group] Failed to configure with error message [Exception of type 'System.EnterpriseServices.TransactionProxyException' was thrown"
Installing BizTalk Server 2010
in a Basic Multi-Computer Environment: Preparing and install prerequisites on BizTalk Server 2010 machine
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.
Similar Messages
-
Issue with Service Group Configuration for a BPM Process
Hi,
I am working on BPM processes on CE 711. I need to use the Service Group settings. I created a BPM process with a automated activity that maps to an enterprise service in HU2 (SAP ES Workplace system).
After setting up the configuration in NWA for service registry and service group, I run the BPM process. The Enterprise Service runs into error and log records it as 'No matching BindingData is found for SOA smart configuration'. I have done most of the configuration as recommended but the matching end point
url seems to be picked wrongly [http://erp.esworkplace.sap.com/sap/bc/srt/xip/sap/ecc_employeebasicdbyemployeeqr?sap-client=800] .
I could not get any info on notes search and could not get much info about service group config. Any help here is greatly appreciated.
Regards
SureshHi Suresh,
i just got an answer on my ticket. Here it is:
There is a known issue with the upper case of the endpoint published in
the Services Registry and in the WSDL.
Before SP2 the matching for the binding for invocation is done
by the endpoint url. There is a known issue that the endpoint published
in the Services Registry is with lower case of the characters but in theWSDL the endpoint is with upper case. In your case the endpoint url in
the Services Registry is as shown in the exception above:
http://erp.esworkplace.sap.com/sap/bc/srt/xip/sap/ecc_srvcreqcrtrc?sap-client=800
but in the WSDL the endpoint url is with upper case of the endpoint:
../ECC_SRVCREQCRTRC/..
Because of this difference the call fails. This is fixed is 711 SP2.
Workaround for this is if you create a Provider System based on your
WSDL, not a Services Registry one.
Hope that helps...
Best regards
Michael -
OCS 2007 R2 Response Group Configuration Tool Failure
Hello there.
We are bringing back to life an old OCS installation. Customer performed a clean AD reinstall and we are in the process of re-installing OCS 2007 R2. All seems to work fine, except the RGS. When accessing the web tool we get this error:
Response Group Configuration Tool Failure
An unknown error occurred. The operation cannot complete successfully. Please contact the administrator if this problem persists.
Click here to return Home.
the Event viewer for application on the FE shows:
Event code: 3005
Event message: Excepción no controlada.
Event time: 13/05/2014 12:13:01 p.m.
Event time (UTC): 13/05/2014 06:13:01 p.m.
Event ID: a74ea242095f4e8099bca266a7a5cc83
Event sequence: 8
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/ROOT/Rgs-1-130444779241580315
Trust level: Full
Application Virtual Path: /Rgs
Application Path: C:\Program Files\Microsoft Office Communications Server 2007 R2\Web Components\Acd Files\
Machine name: OCSR2-FE02
Process information:
Process ID: 6504
Process name: w3wp.exe
Account name: domain\RTCComponentService
Exception information:
Exception type: COMException
Exception message:
Request information:
Request URL: https://ocspool.domain.com:443/Rgs/Deploy/Default.aspx
Request path: /Rgs/Deploy/Default.aspx
User host address: 172.16.6.32
User: domain\user
Is authenticated: True
Authentication Type: Negotiate
Thread account name: domain\RTCComponentService
Thread information:
Thread ID: 9
Thread account name: domain\RTCComponentService
Is impersonating: False
Stack trace: en System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
en System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
en System.Management.ManagementObjectCollection.get_Count()
en Microsoft.Rtc.Acd.Management.OcsApplicationContactSetting.Select(String condition)
en Microsoft.Rtc.Acd.Web.UI.WorkflowTemplate.GetContactObject()
en Microsoft.Rtc.Acd.Web.UI.WorkflowTemplate.AddedControl(Control control, Int32 index)
en ASP.deploy_default_aspx.__BuildControl__control15(Control __ctrl)
en Microsoft.Rtc.Acd.Web.UI.TemplateHelper.InstantiateWorkflowTemplate(AcdWorkflow workflow, ITemplate template, ControlCollection controlsToAddTo, String resourceClass, String templateResourcePrefix)
en Microsoft.Rtc.Acd.Web.UI.AcdWorkflowList.CreateChildControls()
en System.Web.UI.Control.EnsureChildControls()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Custom event details:
on the OCS logs I have:
Unhandled exception occurred in the Response Group Service Configuration Tool. The operation could not complete successfully.
Requested URL: /Rgs/Deploy/Default.aspx
User / Host making the Request: domain\user/ 172.16.6.32
Unhandled exception: System.Web.HttpUnhandledException - Se produjo una excepción de tipo 'System.Web.HttpUnhandledException'.
Inner Exception: System.Runtime.InteropServices.COMException
Cause: An unhandled exception occurred.
Resolution:
Check the exception.
Windows server is installed in spanish, if you wonder why the mix in languages.
We have been battling with this error for the last 2 weeks. Any help is greatly appreciated!
FRHi,
Please check the configuration of the Response Group Service with the help of the link below:
http://technet.microsoft.com/en-us/library/dd441277(v=office.13).aspx
Please check the OCS components that are required to implement the Response Group Service below:
Application Server and Response Group Service
Language pack
Administrative tools
Web Components Server
Internet Information Services
Microsoft Office Communicator 2007 R2
You can try to use the workflows that you crated to validate the deployment.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
BizTalk 2013 BAM Tools - BAM Alerts Configuration error in Multi Computer Env
Hi,
I am trying to install BizTalk Server in multi-computer environment.
I did install BizTalk Server on primary server smoothly.
On Sencodary Server, I am able to join existing SSO and BizTalk Group.
When I try to configure BAM Tools and BAM Alerts I get an error in BizTalk Log -
2014-02-06 11:12:39:6987 [Info] BAMTools Source:
2014-02-06 11:12:39:6987 [Info] BAMTools System.ServiceProcess
2014-02-06 11:12:39:6987 [Info] BAMTools Error messages:
2014-02-06 11:12:39:6987 [Info] BAMTools
2014-02-06 11:12:39:6987 [Info] BAMTools Service BAMAlerts was not found on computer '.'.
2014-02-06 11:12:39:6997 [Info] BAMTools The specified service does not exist as an installed service
2014-02-06 11:12:39:6997 [Info] BAMTools
2014-02-06 11:12:39:6997 [Info] BAMTools Call stack:
2014-02-06 11:12:39:6997 [Info] BAMTools
2014-02-06 11:12:39:6997 [Info] BAMTools at System.ServiceProcess.ServiceController.GenerateNames()
2014-02-06 11:12:39:6997 [Info] BAMTools at System.ServiceProcess.ServiceController.get_ServiceName()
2014-02-06 11:12:39:6997 [Info] BAMTools at System.ServiceProcess.ServiceController.GenerateStatus()
2014-02-06 11:12:39:6997 [Info] BAMTools at System.ServiceProcess.ServiceController.get_Status()
2014-02-06 11:12:39:6997 [Info] BAMTools at Microsoft.BizTalk.Bam.Management.AlertHostHelper.StopService()
2014-02-06 11:12:39:6997 [Info] BAMTools <BizTalk2009>
02/06/2014 11:12:38 1
Microsoft.BizTalk.Bam.Management.AlertModule2012
UpdateConfig Error
Exception thrown
2014-02-06 11:12:39:6997 [Info] BAMTools Source:
2014-02-06 11:12:39:6997 [Info] BAMTools System.ServiceProcess
2014-02-06 11:12:39:6997 [Info] BAMTools Error messages:
2014-02-06 11:12:39:6997 [Info] BAMTools
2014-02-06 11:12:39:6997 [Info] BAMTools Service BAMAlerts was not found on computer '.'.
2014-02-06 11:12:39:6997 [Info] BAMTools The specified service does not exist as an installed service
2014-02-06 11:12:39:6997 [Info] BAMTools
2014-02-06 11:12:39:6997 [Info] BAMTools Call stack:
2014-02-06 11:12:39:6997 [Info] BAMTools
2014-02-06 11:12:39:6997 [Info] BAMTools at System.ServiceProcess.ServiceController.GenerateNames()
2014-02-06 11:12:39:6997 [Info] BAMTools at System.ServiceProcess.ServiceController.get_ServiceName()
2014-02-06 11:12:39:6997 [Info] BAMTools at System.ServiceProcess.ServiceController.GenerateStatus()
2014-02-06 11:12:39:6997 [Info] BAMTools at System.ServiceProcess.ServiceController.get_Status()
2014-02-06 11:12:39:6997 [Info] BAMTools at Microsoft.BizTalk.Bam.Management.AlertHostHelper.StopService()
2014-02-06 11:12:39:6997 [Info] BAMTools at Microsoft.BizTalk.Bam.Management.AlertModule2012.UpdateConfig(BamConfigurationManager originalConfig, BamConfigurationManager bamConfig)
2014-02-06 11:12:39:6997 [Info] BAMTools <BizTalk2009>
02/06/2014 11:12:38 1
Microsoft.BizTalk.Bam.Management.AlertModule2012
UpdateConfig Exit
2014-02-06 11:12:39:6997 [Info] BAMTools <BizTalk2009>
02/06/2014 11:12:38 1
Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility
Main Error
Exception thrown
2014-02-06 11:12:39:6997 [Info] BAMTools Source:
2014-02-06 11:12:39:6997 [Info] BAMTools System.ServiceProcess
2014-02-06 11:12:39:6997 [Info] BAMTools Error messages:
2014-02-06 11:12:39:6997 [Info] BAMTools
2014-02-06 11:12:39:6997 [Info] BAMTools Service BAMAlerts was not found on computer '.'.
2014-02-06 11:12:39:6997 [Info] BAMTools The specified service does not exist as an installed service
2014-02-06 11:12:39:6997 [Info] BAMTools
2014-02-06 11:12:39:6997 [Info] BAMTools Call stack:
2014-02-06 11:12:39:6997 [Info] BAMTools
2014-02-06 11:12:39:6997 [Info] BAMTools at System.ServiceProcess.ServiceController.GenerateNames()
2014-02-06 11:12:39:6997 [Info] BAMTools at System.ServiceProcess.ServiceController.get_ServiceName()
2014-02-06 11:12:39:6997 [Info] BAMTools at System.ServiceProcess.ServiceController.GenerateStatus()
2014-02-06 11:12:39:6997 [Info] BAMTools at System.ServiceProcess.ServiceController.get_Status()
2014-02-06 11:12:39:6997 [Info] BAMTools at Microsoft.BizTalk.Bam.Management.AlertHostHelper.StopService()
2014-02-06 11:12:39:6997 [Info] BAMTools at Microsoft.BizTalk.Bam.Management.AlertModule2012.UpdateConfig(BamConfigurationManager originalConfig, BamConfigurationManager bamConfig)
2014-02-06 11:12:39:6997 [Info] BAMTools at Microsoft.BizTalk.Bam.Management.AlertModule.UpdateConfig()
2014-02-06 11:12:39:6997 [Info] BAMTools at Microsoft.BizTalk.Bam.Management.BamManager.UpdateConfigurationXml()
2014-02-06 11:12:39:6997 [Info] BAMTools at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.HandleUpdateConfig()
2014-02-06 11:12:39:6997 [Info] BAMTools at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.DispatchCommand()
2014-02-06 11:12:39:6997 [Info] BAMTools at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.Run()
2014-02-06 11:12:39:6997 [Info] BAMTools at Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility.Main(String[] args)
2014-02-06 11:12:39:6997 [Info] BAMTools <BizTalk2009>
02/06/2014 11:12:38 1
Microsoft.BizTalk.Bam.Management.BamManagementUtility.BamManagementUtility
Main Exit
2014-02-06 11:12:39:6997 [Info] BAMTools Finished logging tracing of bm.exe execution.
2014-02-06 11:12:39:6997 [Info] BAMTools Deleting File: C:\Users\!gtqk\AppData\Local\Temp\2\6fc65525-7a2d-4c82-aa3a-e776e4e58291-BamManagerTrace.log
2014-02-06 11:12:39:7007 [Info] BAMTools Deleting File: E:\Program Files (x86)\Microsoft BizTalk Server 2013\Tracking\bm.exe.config
2014-02-06 11:12:39:7007 [Error] BAMTools Error configuring
Error executing bm.exe with tracing enabled. (Microsoft.BizTalk.Bam.CfgExtHelper.Utility)
Error executing process: E:\Program Files (x86)\Microsoft BizTalk Server 2013\Tracking\bm.exe (Microsoft.BizTalk.Bam.CfgExtHelper.Utility)
Microsoft (R) Business Activity Monitoring Utility Version 3.10.229.0
Copyright (C) Microsoft Corporation. All rights reserved.
I have made the required changes on the SQL Server - MSTDC, Named Pipes Enabled.
BizTalk Server 1 and BizTalk Server 2 both have required MSDTC settings. Along with this Firewall settings are also modified.
I have followed this link - http://social.technet.microsoft.com/wiki/contents/articles/1888.install-and-configure-bam-business-activity-monitoring-in-a-multi-computer-environment.aspx
which is for BizTalk Server 2010 (provided for BizTalk Server 2013 ?).
Kindly, let me knoe if anyone had similar issue and it has been resolved , or any other pointers
With Regards,
Gopal TalrejaI faced similar problem while installing BAMAlerts on 2nd BizTalk 2013 R2 server in a group. The reason for this error is the Wizard is unable to create the windows service (BAMAlerts) during the configuration. To fix the issue you need to create the service
manually. I had to perform following actions:
1.CREATE SERVICE:
Start command prompt as administrator on the node with problems. Execute (do not use copy paste from email, it often gives error):
sc create BAMAlerts binPath= "C:\Program Files (x86)\Microsoft BizTalk Server 2013\Tracking\BAMAlerts.exe”
2. SET USERNAME and PASSWORD on this Service:
Open services admin console, and change the user and password for the BAMAlerts Service.
- Start the service.
Start again the configuration for the BAM on the node with problems and complete the BAMTools and BAMAlerts configration (do not enter any username and password in the BAMAlerts configuration wizard).
3. RUN SQL Statement:
After starting the Service, BAMAlerts service may stop with following error in the event log:
Microsoft.BizTalk.Bam.Management.BamManagerException: Encountered error while executing command on SQL Server "A-CLS01VISQL1". --->
System.Data.SqlClient.SqlException: The EXECUTE permission was denied on the object 'bam_Metadata_GetProperty', database 'BAMPrimaryImport', schema 'dbo'.
To solve this, run following SQL statement
USE BAMPrimaryImport
GRANT
EXECUTE
ON
bam_Metadata_GetProperty
TO
BAM_ManagementNSReader;
GO
This should solve the problem.
Thanks to Microsoft support engineer for help.
Strange bug and I hope MS will solve this issue in next patch/CU/update -
BAM Portal configuration error in BizTalk Server 2013 R2
I have tried 2 attempts to build out a BizTalk Server 2013 R2, I have followed the MSDN Install instructions, and I keep on getting an error when configuring BAM Portal. I have the logfile available, I need to know what the experts need to see in order to
give me an answer. Understand that we have been using BizTalk Server 2013 for the last two years, and a new developer wants the R2 version and BAM Portal configured. As an administrator I have fought this to no end, and now I have enough evidence to go back
to our project manager and explain why you do not install every feature on a server. Prove me wrong EXPERTS!" I need to know what the experts need to see in order to give me an answer."
Experts needs:
1) Little background of the issue you are facing.
2) The log file generated.
3) The configuration of your server.
"now I have enough evidence to go back to our project manager and explain why you do not install every
feature on a server."
Disagree, It is indeed possible to install all the components and feature on a server. Somewhere someone would have installed BizTalk 2013 R2 and all its components in exactly same server configuration successfully in which you are trying to achieve, the
only difference could be a missing Package, Patch, Cumulative Update, Service or any configuration miss at your end.
Pls read more about BizTalk 2013R2 installation on Installation Overview for BizTalk Server 2013 and 2013 R2.
Review the Hardware
and Software Requirements for BizTalk Server 2013 and 2013 R2.
Understand the Considerations
Before Installing BizTalk Server 2013 and 2013 R2.
Prepare Your Computer for Installation.
Specifically for BAM Portal. Microsoft has documented Prerequisites, Permissions and Considerations.
Planning for the BAM Portal
I would advice you to refer this post by Sandro . BAM Portal configuration error
Rachit -
Issue with BAM Tools configuration in Biztalk server 2013
Hi all,
When I configure biztalk server 2013 I am facing the the below mentioned warning,
I have followed the below mentioned link but still problem continues
http://social.msdn.microsoft.com/Forums/en-US/8f4833e7-89b9-41bb-bd52-c58228491cbd/how-to-restart-biztalk-service?forum=biztalkgeneralThis is a known issue. You need to install CU1 before configuring BAM:
BizTalk Server 2013 CU1
Morten la Cour -
Sharepoint server 2013 configuration issue - failed to create configuration database
Hi All,
I have installed the SharePoint server 2013. After installing the SharePoint products, the configuration stops at failure of creating configuration database.
Some system configuration & info:
- 1 Domain controller server run Active Directory services on Windows server 2008 R2 SP1 (PC1 with name DC.Brainfiniti.com)
- 1 Server which is used for installing Sharepoint server 2013 and MS SQL server 2008 R2 SP1 (PC2 with name App.Brainfiniti.com)
- All of PCs were satisfied the requirement of Sharepoint server 2013
- Firewall turned off & No antivirus tool was installed.
- During installing of Sharepoint, choose "Complete" option: Farm mode and use SQL Server instead of SQL Express.
- During configuration, created a new farm with a domain user account.
- Use domain account to log on and install, configure in Sharepoint & SQL server (PC2)
ATTEMPTS:
1. Tried install and set up all of steps with just 1 account - domain administrator.
2. Tried with separate domain account:
- SQL Service account use for:
+ Install SQL server 2008
+ Connect all SQL services
+ Admin for SQL server
- Setup account use for:
+ Member of local administrator group in PC2
+ Install Sharepoint
+ Run Configuration wizard
+ Was granted permission in SQL database: dbcreator, securityadmin, sysadmin and deselect serveradmin role.
+ Was choose for the database account in configuration database step
Also tried with SQL service account in this step.
3. Tried with Standalone mode for Sharepoint installing
4. Trie with domain name: Brainfiniti.local
5. Tried with some another solution from topic relate to database configuration in our community but not successful.
But all attempts are failed at this configuration database step :'(
Please correct me if I am going wrong by missing something or do I need to start/install some services.
Screenshot Attached
Sorry! Cannot add screenshot because my account is still not verified. Will add later.
LOG ENTRY:
01/23/2013 06:58:28 1 INF Entering function CreateCentralAdministrationSiteForm.CreateCentralAdministrationSiteFormInitializeBeforeShow
01/23/2013 06:58:28 1 INF Found a task by the name of adminvs in the task collection
01/23/2013 06:58:28 1 INF Entering function TaskCommon.GenerateRandomUnUsedPort
01/23/2013 06:58:28 1 INF Entering function TaskCommon.EnsureIIs
01/23/2013 06:58:28 1 INF Entering function PreRequisiteChecks.IsIisInstalled
01/23/2013 06:58:28 1 INF Entering function PreRequisiteChecks.IsRightVersionOfIis
01/23/2013 06:58:28 1 INF Version of IIS is 7
01/23/2013 06:58:28 1 INF Leaving function PreRequisiteChecks.IsRightVersionOfIis
01/23/2013 06:58:28 1 INF Leaving function PreRequisiteChecks.IsIisInstalled
01/23/2013 06:58:28 1 INF Entering function PreRequisiteChecks.IsRightVersionOfIis
01/23/2013 06:58:28 1 INF Version of IIS is 7
01/23/2013 06:58:28 1 INF Leaving function PreRequisiteChecks.IsRightVersionOfIis
01/23/2013 06:58:28 1 INF Entering function ServiceHelper.Start
01/23/2013 06:58:28 1 INF Trying to start service W3SVC and waiting 180 sec to do so
01/23/2013 06:58:28 1 INF service W3SVC is Running, nothing to do
01/23/2013 06:58:28 1 INF starting service W3SVC (it may already be started)
01/23/2013 06:58:28 1 INF Leaving function ServiceHelper.Start
01/23/2013 06:58:28 1 INF Leaving function TaskCommon.EnsureIIs
01/23/2013 06:58:28 1 INF Trying to see if port 40993 is free on machine APP. Min port we will try is 1024, Max port we will try is 49151
01/23/2013 06:58:30 1 INF A SocketException was thrown with
SocketError ConnectionRefused
01/23/2013 06:58:30 1 INF Connect has been refused for port 40993, so we will consider this a free port
01/23/2013 06:58:30 1 INF Have not found a free port yet. Number of tries is 1. Min port we will try is 1024, Max port we will try is 49151
01/23/2013 06:58:30 1 INF Adding port 40993 to the exclusion list so it is not chosen again during this run
01/23/2013 06:58:30 1 INF Leaving function TaskCommon.GenerateRandomUnUsedPort
01/23/2013 06:58:30 1 INF Leaving function CreateCentralAdministrationSiteForm.CreateCentralAdministrationSiteFormInitializeBeforeShow
I just post a part of its logs which contain "error" string because it's too long.
According this log, there is a error in port connection but i've turned firewall off ???
Please help me with this mix up :'(
p/s: sorry for my English!
Thanks,
Hien HoangBelow is the logs entry with "ERR" marked line:
01/23/2013 07:03:17 9 INF Now joining to farm at server app.brainfiniti.com database SharePoint_Config
01/23/2013 07:04:12 9 ERR Task configdb has failed with an unknown exception
01/23/2013 07:04:12 9 ERR Exception: System.Security.Principal.IdentityNotMappedException: Some or all identity references could not
be translated.
at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType)
at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
01/23/2013 07:04:12 9 INF Entering function Common.BuildExceptionMessage
01/23/2013 07:04:12 9 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Resource id to be retrieved is ExceptionInfo for language English (United States)
01/23/2013 07:04:12 9 INF Resource retrieved id ExceptionInfo is An exception of type {0} was thrown.
Additional exception information: {1}
01/23/2013 07:04:12 9 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Leaving function Common.BuildExceptionMessage
01/23/2013 07:04:12 9 INF Entering function Common.BuildExceptionInformation
01/23/2013 07:04:12 9 INF Entering function Common.BuildExceptionMessage
01/23/2013 07:04:12 9 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Resource id to be retrieved is ExceptionInfo for language English (United
States)
01/23/2013 07:04:12 9 INF Resource retrieved id ExceptionInfo is An exception of type {0} was thrown.
Additional exception information: {1}
01/23/2013 07:04:12 9 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Leaving function Common.BuildExceptionMessage
01/23/2013 07:04:12 9 INF Leaving function Common.BuildExceptionInformation
01/23/2013 07:04:12 9 ERR An exception of type System.Security.Principal.IdentityNotMappedException was thrown. Additional exception
information: Some or all identity references could not be translated.
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType)
at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
01/23/2013 07:04:12 9 INF Entering function Common.BuildExceptionInformation
01/23/2013 07:04:12 9 INF Entering function TaskBase.OnTaskStop
01/23/2013 07:04:12 9 INF Creating the OnTaskStop event for task configdb
01/23/2013 07:04:12 9 ERR Task configdb has failed
01/23/2013 07:04:12 9 INF friendlyMessage for task configdb is An exception of type System.Security.Principal.IdentityNotMappedException
was thrown. Additional exception information: Some or all identity references could not be translated.
01/23/2013 07:04:12 9 INF debugMessage for task configdb is An exception of type System.Security.Principal.IdentityNotMappedException
was thrown. Additional exception information: Some or all identity references could not be translated.
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType)
at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
01/23/2013 07:04:12 9 INF Entering function TaskBase.FireTaskStateChanged
01/23/2013 07:04:12 9 INF Firing the OnTaskStateChanged event for task configdb
01/23/2013 07:04:12 9 INF Entering function TaskDriver.TaskStateEventHandler
01/23/2013 07:04:12 9 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Resource id to be retrieved is ConfigurationDatabaseTaskDisplayName
for language English (United States)
01/23/2013 07:04:12 9 INF Resource retrieved id ConfigurationDatabaseTaskDisplayName
is configuration database
01/23/2013 07:04:12 9 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 9 INF Received an TaskStateEventHandler event. task:configdb TaskBase.State:stopped
01/23/2013 07:04:12 9 INF Entering function TasksQueue.IncrementTaskFailed
01/23/2013 07:04:12 9 INF Incremented the number of tasks failed to 1
01/23/2013 07:04:12 9 INF Leaving function TasksQueue.IncrementTaskFailed
01/23/2013 07:04:12 9 INF Task configdb has stopped and failed. Total failed is now 1
01/23/2013 07:04:12 9 INF Leaving function TaskDriver.TaskStateEventHandler
01/23/2013 07:04:12 9 INF Entering function PsconfigBaseForm.TaskStateEventHandler
01/23/2013 07:04:12 9 INF Invoking the UI thread with the task state chagne event
01/23/2013 07:04:12 1 INF Entering function ConfigurationProgressForm.InvokeTaskStateEventHandler
01/23/2013 07:04:12 1 INF Received an TaskStateEventHandler event. task:configdb
TaskBase.State:stopped TaskBase.TaskResultconfigdb
01/23/2013 07:04:12 1 INF Acquiring the reader lock to retrieve the state
01/23/2013 07:04:12 1 INF Releasing the reader lock to retrieve the state
01/23/2013 07:04:12 1 INF Acquiring the reader lock to retrieve the state
01/23/2013 07:04:12 1 INF Releasing the reader lock to retrieve the state
01/23/2013 07:04:12 1 ERR Task configdb has stopped and failed. Total failed
is now 1
01/23/2013 07:04:12 1 INF Entering function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found value in collection for key
disconnect
01/23/2013 07:04:12 1 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found parameter disconnect in collection
01/23/2013 07:04:12 1 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found value in collection for key
connect
01/23/2013 07:04:12 1 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found parameter connect in collection
01/23/2013 07:04:12 1 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found value in collection for key
create
01/23/2013 07:04:12 1 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 1 INF Found parameter create in collection
01/23/2013 07:04:12 1 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 1 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 1 INF Resource id to be retrieved is ConfigurationDatabaseTaskCreateFailConfigDisplayLabel
for language English (United States)
01/23/2013 07:04:12 1 INF Resource retrieved id ConfigurationDatabaseTaskCreateFailConfigDisplayLabel
is Failed to create the configuration database.
01/23/2013 07:04:12 1 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 1 INF Updating the task label below the progress bar Failed to
create the configuration database.
01/23/2013 07:04:12 1 INF Entering function FormParameterCollection.Add
01/23/2013 07:04:12 1 INF Leaving function FormParameterCollection.Add
01/23/2013 07:04:12 1 INF Last message from task configdb is An exception of type System.Security.Principal.IdentityNotMappedException
was thrown. Additional exception information: Some or all identity references could not be translated.
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background
with our trademarked image
01/23/2013 07:04:12 1 INF Updating the task additional notification information below
the progress bar An exception of type System.Security.Principal.IdentityNotMappedException was thrown. Additional exception information: Some or all identity references could not be translated.
01/23/2013 07:04:12 1 INF Leaving function ConfigurationProgressForm.InvokeTaskStateEventHandler
01/23/2013 07:04:12 9 INF Sleeping an extra 1 ms so things don't go too fast for the user for this
task
01/23/2013 07:04:12 1 INF Not running in high contrast, so we will paint the background with our
trademarked image
01/23/2013 07:04:12 9 INF Leaving function PsconfigBaseForm.TaskStateEventHandler
01/23/2013 07:04:12 9 INF Leaving function TaskBase.FireTaskStateChanged
01/23/2013 07:04:12 9 INF Leaving function TaskBase.OnTaskStop
01/23/2013 07:04:12 9 INF Leaving function TaskThread.ExecuteTask
01/23/2013 07:04:12 4 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 4 INF Resource id to be retrieved is ConfigurationDatabaseTaskDisplayName for language English (United States)
01/23/2013 07:04:12 4 INF Resource retrieved id ConfigurationDatabaseTaskDisplayName is configuration database
01/23/2013 07:04:12 4 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 4 ERR Task configuration database failed, so stopping execution of the engine
01/23/2013 07:04:12 4 INF Entering function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found value in collection for key disconnect
01/23/2013 07:04:12 4 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found parameter disconnect in collection
01/23/2013 07:04:12 4 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found value in collection for key connect
01/23/2013 07:04:12 4 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found parameter connect in collection
01/23/2013 07:04:12 4 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found value in collection for key create
01/23/2013 07:04:12 4 INF Leaving function CommandCollectionBase.Get
01/23/2013 07:04:12 4 INF Found parameter create in collection
01/23/2013 07:04:12 4 INF Leaving function Command.this[string key]
01/23/2013 07:04:12 4 INF Entering function StringResourceManager.GetResourceString
01/23/2013 07:04:12 4 INF Resource id to be retrieved is ConfigurationDatabaseTaskCreateFailConfigDisplayLabel for language English
(United States)
01/23/2013 07:04:12 4 INF Resource retrieved id ConfigurationDatabaseTaskCreateFailConfigDisplayLabel is Failed to create the configuration
database.
01/23/2013 07:04:12 4 INF Leaving function StringResourceManager.GetResourceString
01/23/2013 07:04:12 4 ERR Failed to create the configuration database.
An exception of type System.Security.Principal.IdentityNotMappedException was thrown. Additional exception information: Some or all identity references could not be translated.
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType)
at System.Security.AccessControl.CommonObjectSecurity.ModifyAccess(AccessControlModification modification, AccessRule rule, Boolean& modified)
at System.Security.AccessControl.CommonObjectSecurity.AddAccessRule(AccessRule rule)
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceCertificate.ProvisionLocal()
at Microsoft.SharePoint.Administration.Claims.SPSecurityTokenServiceApplication.ProvisionLocal(SPServiceInstance serviceInstance)
at Microsoft.SharePoint.Administration.SPIisWebServiceInstance.Provision()
at Microsoft.SharePoint.Administration.SPFarm.Join(Boolean skipRegisterAsDistributedCacheHost)
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.CreateOrConnectConfigDb()
at Microsoft.SharePoint.PostSetupConfiguration.ConfigurationDatabaseTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
01/23/2013 07:04:12 4 INF Entering function TaskDriver.NotifyTaskSummary -
Error checking transport group configuration in System BQS
Hi Everyone,
I made a client export from Production to Quality. It went successfully,, I noted the requests numbers and transported them from PRD to Quality, but while transporting there was a tp error(which i did not note), next i went to the quality import queue and saw all the 3 requests had come. But when i click the adjust queue icon im getting the following error message "Error checking transport group configuration in System BQS" . Afterwards i tried to delete the requests from quality to retransport from production but still im not able to delete those requests from quality. Can anyone help me solve this.
Regards,
RahulHello Rahul,
regarding the error message:
"Error checking transport group configuration in system"
It's mostly related to the TMSADM RFC destination. Kindly follow the below mention steps:
1. Logon to client 000 with user DDIC.
2. STMS > System > Overview > Select the system in which you are logged in > Click on the menu says EXTRAS > Generate RFC Destinations
Perform the above steps in all the systems configure in your TMS. This should resolve the issue.
Best regards,
Tomas Black -
Hi there,
I get this error when I perform a DB Attach upgrade from SharePoint 2010 to SharePoint 2013.
"web application is configured with claims authentication mode however the content database you are trying to attach is intended to be used against a windows classic authentication mode."
Any help is appreciated. Thanks.There is other way of fixing this issue apart from what Amit mentioned. Create a classic based web application in SP 2013 using PowerShell.
New-SPWebApplication -Name "TestApplication" -ApplicationPool "TestApplicationAppPool" -AuthenticationMethod "NTLM" -ApplicationPoolAccount (Get-SPManagedAccount "sppoc\spfarm") -Port 100 -URL "http://sp2013demo"
Now mount the content database from SP 2010 on to the web application created above
Mount-SPContentDatabase WSS_Content_100 -DatabaseServer SQL2012Demo -WebApplication http://sp2013demo:100
Once the mount is complete, convert the web application to use claims and migrate the user to use claims identity.
Convert-SPWebApplication -Identity "http://sp2013demo:100" -To Claims –RetainPermissions -Force
$w = Get-SPWebApplication "http://sp2013demo:100"
$w.MigrateUsers($True)
See my blog post about it: http://www.sharepointnadeem.com/2014/01/upgrade-from-sharepoint-2010-classic.html
Please remember to up-vote or mark the reply as answer if you find it helpful. -
Exchange 2013 Hybrid Configuration Wizard OAuth error
Hi,
We are facing following error when we run OAuth configuration after complete the Hybrid Configuration Wizard.
Error:
ScenarioFailureException
Message:
Exchange OAuth authentication couldn't find any accepted domains in your on-premises organization.
Verify you've configured at least one on-premises accepted domain.
Location:
at Microsoft.Online.CSE.HRC.Activities.OAuthActivities.GetCertificateActivity.Run()
at Microsoft.Online.CSE.HRC.Workflow.Activity.WorkflowBaseActivity.Launch()
at Microsoft.Online.CSE.HRC.Workflow.Runtime.WorkflowActivityHelper.Execute(ActivityContext context, Boolean launch)
at System.Activities.NativeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)
at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager,
Location resultLocation)
Environment:
2x Exchange 2013 CU6 (DAG+one ClientAccess)
Directory Sync Server
No ADFS server since we don't need single sign on
Office 365 E3 Tenant
We have tried manually setup the OAuth configuration according to the below TechNet article but failed when running the ExportAuthCert.ps1
script file. It couldn't match the certificate thumbprint with the location "Cert:\LocalMachine\My"
http://technet.microsoft.com/en-us/library/dn594521%28v=exchg.150%29.aspx
Please help!
Thanks in Advance
RoshanWe have the exact same Issue, tried the exact same setup and NO JOY!! - any resolution yet?
Also found this article:
http://consulting.risualblogs.com/blog/2014/09/10/exchange-2013-cu6-hybrid-users-with-o365-unable-to-query-freebusy-for-on-premises-users/comment-page-1/#comment-5192
..... but did not fix the free/busy
Best Regards,
Francois -
TMS Provisioning Extension services: BASE GROUP Configuration Issue
I was trying to configure the TMS Provisioning Extension services and i got stuck in Base Group Value?
Error was getting something like the Base group value which i given was wrong. And it's asking me to check with TMS Administrator. Unfortunatly i am the one who configured the TMS also. but i didn't find something like Base Group value.
In my scenario i have two VCS Control, two VCS Expressway, and a TMS. I have the clustering configured on both VCS Control and Expressway. and i need to use TMS Provisioning Extension Service for Cisco Movi.
Where i can find the Base Group Configuration value?
Regards,
Nikhil JayanHi, i am not able to see the Provisioning Mode option in Administrative tools > Configuration > General Settings.
Administrative tools > Configuration > Provisioning Extension Settings tab also is not coming. I am using TMS Version 13.2 and VCS x7.1.
Do i need to configure something to get enable the TMS Provisioning Extension Service on TMS.
Please help me.
Regards,
Nikhil Jayan -
Windows Server Essentials error occurred while configuring on Windows Server 2012 R2 Standard
am attempting to install the Windows Server Essentials on a new domain controller in a new domain and forest. I go to add roles and features and select essentials. The config wizard says it is Updating and Preparing the Server and
That is all the information that you need to provide. Your server is being prepared for use and may restart more than once. This may take up to 30 minutes.
It goes to 3% and the encounters an error saying An error occurred while configuring Windows Server Essentials. Please try again. I don't seem to find anything in the log to indicate why it fails.Hi boe_d,
Based on your description, did you mean that this error was occurred in process of installing the Windows Server
Essentials Experience Role on Windows Server 2012 R2 Standard? If I misunderstand, please don’t hesitate to let me know.
If it is, have you re-tried the role installation? Please check if still go to 3% and then get the same error
message.
In addition, please add
ServerAdmin$ account to the Logon as a service Group Policy, and then monitor the result. For more details, please refer to the following article.
You may be unable to run post-deployment configuration wizard after you install the Windows Server Essentials
Experience role
http://blogs.technet.com/b/sbs/archive/2013/12/04/you-may-be-unable-to-run-post-deployment-configuration-wizard-after-you-install-the-windows-server-essentials-experience-role.aspx
If this issue still exists, please navigate to: %windir%\Logs\CBS folder and check the CBS log file if you
can find any error that depend on the Essentials Experience Role setup time.
Hope this helps.
Best regards,
Justin Gu -
Configuration Database issue while Deployment.
Hi,
I have a BizTalk 2010 project which I want to deploy on a remote server. When I go to
Properties-> Deployment -> Server and enter the Server name as 'RemoteServer'. I see an error in the Configuration Database:
<No BizTalk Configuration database(s) found on server 'RemoteServer'.>
and when I try to deploy I get error: Parameter name: strDBName
However, when I open other projects, they already have Server 'RemoteServer' selected and Configuration database as 'BizTalkMgmtDb'. Also, I can successfully deploy these projects to the 'RemoteServer'. So, why in this project
I'm not getting any Configuration database?
Please help.
Thanks.
Kunal GHi Kunal,
I did some more work on this.
Case 4:
In Visual Studio’s “Deployment" panes --> Server, if I select any server where I don't have Login permission, then I get the Login error as you have mentioned:
"Login failed for user 'domainNameAprabhu'."
Resolution to Case 3:
In case 4, what I also noticed is when I update the existing Server name (server name where my BizTalkMgmtDb exist) in the Deployment pane, the drop down box unable to recognize the
new SQL server (or not able to refresh the Databasename when any change happen to the Server name) failed with the error:
<No BizTalk Configuration database(s) found on server 'SQL Serer Name'>
However, if I start a new project from scratch, the application can easily find BizTalkMgmtDb.
Then I logged into the database server where the BizTalkMgmtDb exist --> Security --> Logins --> Selected the group where my login (login to the machine where I have SQL Server, if database in the
same machine as Visual studio then you can do this in the same server) --> Properties --> Server Roles --> Check "sysadmin" access.
Then I came back to my Visual Studio, closed and restarted the Visual Studio, went to the Deployment pane in the Server property, I can now get the BizTalkMgmtDb without any issue. It’s a guaranteed privilege
issue.
Regards,
M.R.ASHWINPRABHU
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful. -
BAM Activity and view issue on BizTalk server 2013 R2 machine.
Hello all,
I am trying to make BAM portal work since couple of days but no luck yet...
I ma using BizTalk server 2013 R2.
I am trying to deploy the activity and view from my Development server to Test server ( it's working fine on Developemnt).
I have gone through one post and found this and followed steps here is the output for that :
First confirm that you can see the name of the activity in the list of deployed activity by executing this command:
bm.exe get-activities
--> I can see the activity name in there so I belive that activity is got created.
While creating the BAM activity you must have created/deployed a view get the name of the view by using this command:
bm.exe get-views -Activity:<activity name>
--> I can see the view name in there so I belive that view is exist.
You need to provide permission to the account you are using to access the BAM portal on this view by using this command.
bm.exe add-account -AccountName:”<AccountName>” -View:<viewname>
--> while executing this command is got error as :
Using 'BAMPrimaryImport' BAM Primary Import database on server 'TESTSERVER'...
ERROR: Security management of the BAM view failed.
The SQL role for the specified view is missing.
Note : My BAMAlert service is running and running using
GROUP\~biztalkservice account I am logged on Test Server using "NitinUser" account with administrator rights.
What does this mean - if this mean that I needs to give rights to my user (NitinUser) on SQL Database please tell me how to do that ? with command....
Thanks and Regards, Nitin.Hi Nitin,
Can you try the solution as suggested by Thiago Almeida.
http://connectedthoughts.wordpress.com/2008/06/16/bam-deployment-gotchas/
His solution for this problem is to remove the view and re-add it, which worked for him. Obviously I didn't encounter this error, so have to suggest the solution from community.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.
Hello Ashwin,
As per that post the author was having issue that view was not created ...
also have noticed one thing that by executing following command in sql management studio.
use
BamPrimaryImport
SELECT
SUSER_SNAME(owner_sid),nameFROMsys.DATABASES
on my development box it's showing my user GROUP\nitinUser and Name = CustomBizTalkDB
but when I execute this on TEST server, entry for GROUP\nitinUser is not in database
Thanks and Regards, Nitin. -
storage-vdc(config-if)# show module
Mod Ports Module-Type Model Status
2 32 1/10 Gbps Ethernet Module N7K-F132XP-15 ok
sw1-gd78(config-if)# sh module
Mod Ports Module-Type Model Status
2 48 1/2/4/8 Gbps FC Module DS-X9248-96K9 ok
4 8 10 Gbps FCoE Module DS-X9708-K9 ok
7 0 Supervisor/Fabric-2a DS-X9530-SF2AK9 active *
8 0 Supervisor/Fabric-2a DS-X9530-SF2AK9 ha-standby
10 22 4x1GE IPS, 18x1/2/4Gbps FC Module DS-X9304-18K9 ok
Mod Sw Hw World-Wide-Name(s) (WWN)
2 5.2(2) 1.1 20:41:00:0d:ec:fb:8a:00 to 20:70:00:0d:ec:fb:8a:00
4 5.2(2) 0.107 --
7 5.2(2) 1.8 --
8 5.2(2) 1.8 --
10 5.2(2) 1.3 22:41:00:0d:ec:fb:8a:00 to 22:52:00:0d:ec:fb:8a:00
sw1-gd78(config-if)# sh run int ethernet4/6
!Command: show running-config interface Ethernet4/6
!Time: Mon Feb 20 22:56:12 2012
version 5.2(2)
interface Ethernet4/6
no shutdown
sw1-gd78(config-if)# no shut
sw1-gd78(config-if)# speed 1000
ERROR: Ethernet4/6: Configuration does not match the port capability.
sw1-gd72# sh int ethernet4/6 capabilities
Ethernet4/6
Model: DS-X9708-K9
Type (SFP capable): 10Gbase-SR
Speed: 1000,10000
Duplex: full
Trunk encap. type: 802.1Q
Channel: yes
Broadcast suppression: percentage(0-100)
Flowcontrol: rx-(off/on/desired),tx-(off/on/desired)
Rate mode: dedicated
QOS scheduling: rx-(2q4t),tx-(1p3q4t)
CoS rewrite: yes
ToS rewrite: yes
SPAN: yes
UDLD: yes
Link Debounce: yes
Link Debounce Time: yes
MDIX: no
Port Group Members: none
TDR capable: no
FabricPath capable: yes
Port mode: Switched
sw1-gd72# sh int ethernet4/6 transceiver details
Ethernet4/6
transceiver is present
type is 10Gbase-SR
name is CISCO-FINISAR
part number is FTLX8571D3BCL-CS
revision is C
serial number is FNS12090EMJ
nominal bitrate is 10300 MBit/sec
Link length supported for 50/125um OM2 fiber is 82 m
Link length supported for 50/125um OM3 fiber is 300 m
Link length supported for 62.5/125um fiber is 26 m
cisco id is --
cisco extended id number is 4
SFP Detail Diagnostics Information (internal calibration)
Alarms Warnings
High Low High Low
Temperature 36.21 C 75.00 C -5.00 C 70.00 C 0.00 C
Voltage 3.29 V 3.63 V 2.97 V 3.46 V 3.13 V
Current 8.11 mA 11.80 mA 4.00 mA 10.80 mA 5.00 mA
Tx Power -2.65 dBm 1.49 dBm -11.30 dBm -1.50 dBm -7.30 dBm
Rx Power -2.21 dBm 1.99 dBm -13.97 dBm -1.00 dBm -9.91 dBm
Transmit Fault Count = 0
Note: ++ high-alarm; + high-warning; -- low-alarm; - low-warningAnkit,
You are trying to set speed 1000 on a 10g sfp.
type is 10Gbase-SR
You will need to insert a 1gig sfp and then you will be able to set the speed.
Also, I noticed that you posted first with interface 2/6 and the output you gave me was for 4/6. Are you sure you're in the right interface?
Maybe you are looking for
-
Can you rebuild a library to include all songs in your music folder?
Hey good people, My copy of iTunes was running on an iBook with my library on an external hard drive. Since the drive was often unlugged, I routinely got excalamtion point signs by files that iTunes thought were missing. They weren't missing. The dri
-
Cannot view body of page in Design View with PHP
Hello, I hope some one can help me. I have a website that I am working that I am unable to view the body of the page in Design mode. This is a php file. I can preview the page fine by pressing F12, so it appears PHP is installed and my test server is
-
Hi Our client has global presence and we see POs created for different currency from different regions. The requirement is, do we have a table in SAP that holds currencies with decimal places defined for them. Thanks Vijay
-
Inside Architecture of SOA suite
Hi everybody, Does anybody know where can I get the documentation about the inside architecture of SOA suite/OSB? I'd like to know how SOA suite processes the message after it receive the msg. For example, here is the processing flow I image - firstl
-
After Importing Management Packs Biztalk Applications not Detecting
Hi All, I am new to SCOM, i installed SCOM in Separate Server and i added the Windows system which is running with BIZTALK, after added i imported Biztalk Management pack to SCOM and after that i didn't find any already running appli