BizTalk WCF receive, possible to change the SOAPAction name?
Building Biztalk to replace a webservice to receive vendor order, everything is fine but just realized today the default BizTalk receive soapaction is 'BizTalkSubmit', any way to change that? say to 'ReceiveOrder'?
Thanks
https://ninithepug.wordpress.com/
You can modify the operation name as shown below and expose the BizTalk service again.
Or if you wish to update the existing one.
1. navigate to the ServiceDescription.xml file of the service. This would be generated by the BizTalk wizard. You can go to C:\Inetpub\wwwroot\[servicename]\App_Data\
2. Find the xml tag Operation and replace the value for name attribute from "BizTalkSubmit" to "ReceiveOrder" .
3. Recycle the app pool.
4. Browse the WSDL and it should have the new soapAction value.
Rachit
Please mark as answer or vote as helpful if my reply does
Similar Messages
-
Is It POSSIBLE to change the Technical Name of Z-version Query
Hi Friends ,
I was changed all quereis and cube from standard version to Z version.
For queries, by using rszc , i was changed to Zversion,Now again is it
possible to change the Technical Name of Zversion Query ?
If possible , can you please tell me the process ?Hi Hameed,
This may be the reason you are getting an error.
The target InfoCube, the InfoCube for the query copies, must contain all the InfoObjects of the source InfoCube (InfoCube of the original queries).
The another reasons may be the copying of queries within the same cube shouldn't be done by RSZC.
It's better to approach the Bex Query designer.
Hope you understood..
Check the link below for more information:
Re: How to copy query elements without Bex
http://www.bi-expertonline.com/article.cfm?session=&id=2055
Re: copy queries + variants + workbooks -- RSZC ?
Regards,
Ravi Kanth
Edited by: Ravi kanth on Jun 10, 2009 10:03 AM -
Is it possible to change the genre name...
Can I change the name of the genre for an artist without changing the genre on every single song? Is it possible to change the genre name for all songs by an artist by just typing in the new genre for that artist just once?
Ted,
Yes and no.
You can select all the tracks you wish to change the Genre of and change them all at once. Then choose File>Get Info or type command-i.
You'll be warned that are about to edit information for multiple items.
Click OK. Then make you Genre change.
Just remember any field you change will be changed in all the selected items.
Matt -
Is it possible to change the font name and size without having to compile?
Dear All
We have one requirement that we need to change the font name and font size at run time dynamically without having to compile all the forms in 6i.
Is there any way or work around to achieve the same.Kindly suggest us.
something like using uifont.ali or forms60_defaultfont, or set_item_property
Thanks and Regards
Thangaraj.Dear All,
Thanks for your updates, Technically what both of you said is correct. but in application server we used something like ClientDPI to match the client server font with the application server, i need to know that is there anyother way something like this...?
I have read one document(Note:28397.1 in metalink) saying that using uifont.ali file we can change the font at run time, but i have used this only for report
Thanks and Regards
Thangaraj.S -
E-recruiting: Requisition management - Possible to change the field names??
Hi to all e-recruiting experts,
Need some assistance pertaining to the requisition management portion in e-recruiting.
We have showed the standard SAP E-recruiting requisition bsp pages to our client and they have requested changes to the field names as they feel that the standard names are not intuitive enough.
For instance,
The field - "Hierarchy Level" - They have requested to change to "Job Grade"
and the field "Functional Area" to "Type of Work".
Is there any way that i can change the name of the field through configurations?
I understand that in a infotype, we can change the field name through translation. But can we change it in BSP? I was told to explore on how to configure via OTR.
Can anyone share on the steps involved?
Many thanks in advance.Well quite easy,
create a context for an otr text (E-Recruiting are in package PAOC_RCF_UI). You will find that in SOTR_EDIT.
Activate this context with implementing BADI BTFR_CONTEXT.
After doing this, adjust context in SOTR_EDIT with Go To -> Context -> Adjust.
Eventually refresh otr buffer with Transaction /$otr
For one text there can be more than one OTR Text in backend, so you might change more than one.
Regards -
SOAP RECEIVER: Possible to change the soap header request
Hi
Is it possible to change what is included in the soap header like namespaces (.. xmlns:ns="http://what.com"
Specifically I need to have the "http://Strange.org/thisis.xsd" (see below) included in the header and the <ns:pi-create> included in SOAP-ENV
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:ns="http://Strange.org/thisis.xsd">
<SOAP-ENV:Body>
<ns:pi-create>
<request>
<request-data>...
</request-data>
</request>
</ns:pi-create>
</SOAP-ENV:Body>
</SOAP-ENV:Envelope>
Hope somebody can help
CheersHi Bowie,
1.You can change the Namespace. condition is no obj's under the namesapce then only it's possible otherwise u can't.
2.create a new namesapce what ever u want and copy all the obj's under that namesapce.finally delete the previous one.
XMLAnonymizerBean
Use
You use this module to anonymize XML elements and attributes by removing namespaces or namespace prefixes from the XML document of the main payload.
You can define a particular namespace prefix for each namespace. You can also change the encoding attribute of the XML declaration.
Integration
You can use the module in adapters that can be extended in the module processor.
Activities
Entries in the Processing Sequence
● Insert the module before the adapter module.
If the adapter comprises multiple modules, for information about the position of the module, see: Extending the Module Chain in the Module Processor
● Enter the module name AF_Modules/XMLAnonymizerBean.
● Select the Module Type Local Enterprise Bean.
● The system proposes a module key.
Entries in the Module Configuration
● anonymizer.acceptNamespaces
Enter a list of namespaces and their prefixes that are to be kept in the XML document as follows: namespace1 n1 namespace2 n2 u2026
To enter a namespace without a prefix, enter '' (two single quotation marks).
Any namespaces you do not specify are removed from the XML document.
● anonymizer.quote
Specify the character to be used to enclose the attribute values.
The default value is '. The parameter is optional.
● anonymizer.encoding
To use a code page other than UTF-8, enter it. The parameter is optional.
For example, enter ISO-8859-1.
Example
The anonymizer.acceptNamespaces parameter has the following value:
urn:sap-com:document:sap:rfc:functions rfc urn:sap-com:document:sap:soap:functions:mc-style rfc
● Payload before using the XMLAnonymizerBean:
<Z_PAYMITEM_GET_LIST
xmlns="urn:sap-com:document:sap:rfc:functions"
xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<I_ACCOUNTIDENT xmlns="">
<ACCOUNT_NUMBER>0080000094</ACCOUNT_NUMBER>
<BANK_COUNTRY>DE</BANK_COUNTRY>
<BANK_COUNTRY_ISO>DE</BANK_COUNTRY_ISO>
</I_ACCOUNTIDENT>
</Z_PAYMITEM_GET_LIST>
● Payload after using the XMLAnonymizerBean:
<?xml version='1.0' encoding='utf-8'?>
<rfc:Z_PAYMITEM_GET_LIST
xmlns:rfc='urn:sap-com:document:sap:rfc:functions'>
<I_ACCOUNTIDENT>
<ACCOUNT_NUMBER>0080000094</ACCOUNT_NUMBER>
<BANK_COUNTRY>DE</BANK_COUNTRY>
<BANK_COUNTRY_ISO>DE</BANK_COUNTRY_ISO>
</I_ACCOUNTIDENT>
</rfc:Z_PAYMITEM_GET_LIST>
with rgds,
MFH -
Is it possible to change the computer name?
Trying to simplify a few things and would like to change the names of my computers. Is there an easy way to do it? If so, will it screw other things up? Thanks in advance for any input.
Best,
-ThomasSystem Preferences > Sharing has a place where you can rename the computer. As far as I know, it is completely harmless.
-
die() {
echo "$*" >&2
exit 1
ProjectName=$1
appname=$2
config='Ad Hoc Distribution'
sdk='/Applications/Xcode.app/Contents/Developer/Platforms/iPhoneOS.platform/Develope r/SDKs/iPhoneOS5.1.sdk'
project_dir=$(pwd)
echo using configuration $config
echo updating version number
agvtool bump -all
fullversion="$(agvtool mvers -terse1)($(agvtool vers -terse))"
echo building version $fullversion
xcodebuild -project "$ProjectName".xcodeproj -configuration "$config" -sdk $sdk build || die "build failed"
echo making ipa...
# packaging
cd build/"$config"-iphoneos || die "no such directory"
rm -rf Payload:
rm -f "$appname".*.ipa
mkdir Payload
cp -Rp "$appname.app" Payload/
# if [ -f "$project_dir"/iTunesArtwork ] ; then
# cp -f "$project_dir"/iTunesArtwork Payload/iTunesArtwork
# fi
# ipaname="$appname.$fullversion.$(date -u +%Y%m%d%H%M%S).ipa"
ipaname="$appname.ipa"
zip -r $ipaname Payload
echo finished making $ipaname
. Now i tried to run this sh file thorugh terminal.....thorugh command sh shfilename projectname TEST... After running this command it successfully generated an ipa with name TEST.ipa...I tried to installed this on my device..but on itunes it is giving message that file is not valid..Please help me out if i forgot to perfom any steps.Hi Matthew,
Just staring at your ActiveX code, it looks fine to me. My first thought is that this should work as you outlined it, and I've done this sort of thing many times, so I know it can work. My second thought though, is that what you probably really want is a DataPlugin and not a VBScript. Then you could just drag&drop the Excel file into the Data Portal and load all the properties and channels you want from the Excel file. If you have DIAdem 2010 or later you can use the SpreadSheet reader object in the DataPlugin to avoid the Excel ActiveX functions (and Excel's jealously with other applications trying to read a file it has open already).
Feel free to send me a few sample Excel files and describe what you want to load from the various cells, and I'd be happy to help you get a DataPlugin written to load your data. You can also email me at [email protected]
Brad Turpin
DIAdem Product Support Engineer
National Instruments -
Possible to change the default spool request title ?
Hello,
I'm SAP Basis guy, I've been asked by our functional team if it would be possible to change the default spool request title.
Our endusers have access to transaction SP01, where every morning, they can see the spools request that have been generated during the execution of night batches.
Currently, the default spool name is displayed :
Title or name of spool request LIST1S LOCL ZREPORTSUFFIX (in transactions sm37 and sp01)
Is it possible to change the default name of this spool request with some abap coding ?
Thank you.hi,
goto transaction SPAD and change the default values as you require but i doubt whether you would be able to change the spool title after the job has been triggered i think it is nt possible
but for further requests you can change it from SPAD
reard if helpful
vivekanand -
"Is it possible to hide/remove/change the server name/type and
Is it possible to change the server name/type and version number being sent in the http response header by iPlanet Web server so a hacker can't see what server and version I'm running? If yes, what is the procedure to do it?
Hi,
I have tried the ServerString none entry in magnus.conf but still it is showing the Server information in the header if you use telnet . Is there any other way to hide or to mask this information.
Thanks,
Ramki -
Changing the Default name of DVD Disk in OneStep
Is it possible to change the default name of the disk that is burned on iDVD 6 "OneStep DVD" ???
the default disk name becomes "IDVDONESTEPDVD"...
I make lots of DVD with OneStep and would like the name created to be different.
Is this possible and if so...How??
Thanks for your advice...
STDigitalNot sure if this is possible or not but did you already check the iDVD6 Help Menu and try the following?
Choose Project > Project Info. Type the new name in the Disc Name box.
If this approach isn't possible, then it's likely not a very good idea to change its default title. Good luck.
(3) G4 PM's/(3) S-Drives/Sony TRV900/Nikons/6FWHD's/PS7/iLife06/FCPHD/DVDSP/etc. Mac OS X (10.4.8) My ichatav AIM account is: SDMacuser1 (Please use Text chat prior to video) -
Change the column names programatically
Hi All,
is it possible to change the column name in a table programatically?? my req is like this..I ve a table which contains 60 columns. out of these 60 columns 53 columns signifies the 53 weeks of the year. so i ve to display the date in the column headers. How can i achieve this?
Thanks in advance,
SreeColumn prompts can be modified through the OAF Personalization screens. This will ensure you are declaratively setting the values.
Regards,
Prabodh. -
Changing the technical names of an ODS and queries
Can I change the technical name of an ODS and the queries that are built on it? If so how? Thanks
Hi Niten,
As said by others it is not possible to change the technical name of any BW Object as there are too many complexities involved. However a possible option is create another ODS/cube and queries as the copy of the existing one and then transfer all the data.
Refer this post:
Re: Change infocube name
Bye
Dinesh -
Changing the display names of objects in the JTree
Hi All;
Is there a possibility of changing the display name of the nodes in JTree? I mean not the actual name of the JTree object, but only the display name? Is there any method available for that?
Your help would be greatly appreciated
Thanks in advance
Regards MadummIf your tree node object has application-specific complexity, you should define a custom tree node class and a renderer for that. Or if you just could use DefaultMutableTreeNode, call setUserObject() method with a new String.
-
Hello All,
I saved a report as XYZ.rdf. When I open this it opens with a module name as say ABC.
Now is it possible to change the module name to DEF instead?
(I have some closely numbered reports, I need to change one of them to avoid stepping over the names)
Thanks,
ChiruHi Chiru,
Right click on the module name and select the Property Inspector. Now you can change the property Name.
Regards,
Vincent
Maybe you are looking for
-
Photoshop CS4 running slow on MAC OS X
I bought myself a MAC OS X recently with a student edition of Photoshop CS4, i am currently studying photography and have been told many times that a mac would be the best option to edit images- this coupled with Photoshop CS4. However since loading
-
Why are my images not loading?
Hi there, I am trying to place an image inside of VBox in my application, but when I run the application, all that is displayed is the placeholder for where the image is supposed to be. This is the code I am using to place the image: <mx:Canvas widt
-
How to create Profiles in Ipad2
Hi ASC I'd like to use Ipad with my family, using different profiles. I'm asking you if this is possible and how can I setup them Thanks for help Alberto
-
Jar file error: could not find main class. program will exit
I have created a jar file using following command jar cfm MyProj.jar Manifest.txt richa\*.class and I have included main class header in the Manifest.txt. The executable jar file is created but when I double click on it, it prompts an error Could not
-
Copying Results of Smart Folder Search to a Static Folder
Hello all, Over the years my image files have become duplicative and dispersed. I like the fact that I can create a smart folder that pulls all images into one location. However, before I start my cleanup. I'd like to transfer a copy of each found im