Black Bars on Sides & Poor Upload to YouTube

        I have already tried converting my Mp4's from my camera to AVI and this will resolve the black bars but the end result is still poor video once uploaded... I get the little red x in the lower left hand corner about poor display quality (see picture at bottom) If I work with the original Mp4s and leave the Black Bars on the side the videos looks fine... please help. The AVIs are taking too much space once I convert them from Mp4 so I would like to leave that option out of this topic, unless someone can tell me how set Super or Prisim up to keep the file size the same when converting or how to convert an Mp4 to AVI in a smaller format that is usable by Premiere.
These are the best specs I can give you guys after reading How To Ask A Question from Hunt....
*   WINDOWS 7 64BIT os
*   Adobe Project Settings - HD 1080i 30 presently
                       HD 1080i 30 (60i) formerly
*   Adobe Settings - Default after a clean install of Windows 7
*   Files - Working With raw Mp4 HD 1080/60i (all the same from the same camera)
    * w 1920 x h 1080
    * data rate 17029kbps
    * 59 fps
    * Audio bitrate 128 kbps
    * 2 channel stereo
    * 48 kHz
    * videos are about 500 mb in size each
MY CAMERA
    Signal Type       Signal Type       NTSC
    Storage Media     Storage Media     SDHC slot
    Image Sensor     Sensor Type     CMOS
    Sensor Size     1/4.1"
    No. of pixels     4.7M
    Lens             Optical Zoom     20x (22x)
    Digital Zoom     220x
    Display             Main Screen     No. of pixels     230K
    Video Recording      Recording Format     H.264 HD
    Memory Application     Memory Application     Compatible Card     SDHC
MY COMPUTER
    * Gateway DX4300-03
General
    * Type Personal computer
    * Product Form Factor Mini tower
    * Width 7.1 in
    * Depth 17.3 in
    * Height 16.3 in
    * Weight 24.9 lbs
    * Desktop type Gaming system
Processor
    * Type AMD Phenom X4 9750 / 2.4 GHz
    * Multi-Core Technology Quad-Core
    * 64-bit Computing Yes
    * Installed Qty 1
    * Max Supported Qty 1
Cache Memory
    * Type L2 cache
    * Installed Size 2 MB
    * Cache Per Processor 512 KB ( 4 x 512 KB )
Mainboard
    * Chipset type AMD 780G
RAM
    * Installed Size 8 GB / 8 GB (max)
    * Technology DDR2 SDRAM
    * Form Factor DIMM 240-pin
    * Configuration Features 4 x 2 GB
Storage Controller
    * Type Serial ATA - Integrated
    * Controller interface type Serial ATA-300
Storage
    * Hard Drive 1 x 1 TB - Standard - Serial ATA-300 - 7200 rpm
    * Hard Drive 2nd Drive Simpletech 500gb drive (speed unknown) USB 2.0
    * Hard Drive 3rd Drive WD My Book Essential External Drive 1TB USB 2.0
Optical Storage
    * Type DVD±RW (±R DL) / DVD-RAM
    * Disc Labeling Technology Labelflash Technology
Monitor
    * Acer H203H
    * Sylvania Flatpanel TV extended
Multimedia Functionality
    * TV tuner type Dual digital/analog TV
Graphics Controller
    * NVIDIA GeForce GT 220 - updated yesterday
    * Graphics Processor / Vendor ATI Radeon HD 4650 (not in use)
    * Video Memory 1 GB
Audio Output
    * Type Sound card - Integrated
    * Sound output mode 7.1 channel surround
    * Audio output compliant standards High Definition Audio
    * Speaker(s) 2 x Right / left rear channel
Networking
    * Networking Network adapter - Integrated
    * Wireless LAN Supported Yes
    * Data Link Protocol Ethernet , Fast Ethernet , Gigabit Ethernet
Expansion / Connectivity
    * Expansion Slots Total (Free) 1 ( 0 ) x Processor , 4 ( 0 ) x Memory - DIMM 240-pin , 1 ( 1 ) x PCI Express x1
    * Interfaces 8 x Hi-Speed USB - 4 pin USB Type A ( 4 front, 4 rear ) ,
      1 x Keyboard - Generic - 6 pin mini-DIN (PS/2 style) , 1 x Mouse - Generic - 6 pin mini-DIN (PS/2 style) ,
      1 x Display / video - VGA - 15 pin HD D-Sub (HD-15) , 1 x IEEE 1394 (FireWire) ,
      1 x Network - Ethernet 10Base-T/100Base-TX/1000Base-T - RJ-45 , 1 x Modem -
Phone line - RJ-11 , 1 x Display / video - HDMI - 19 pin HDMI Type A , 1 x Storage - Serial ATA-300 - 7 pin Serial ATA
   *note the red 'X' in the lower left hand corner, as well as the black bars. This is how it looks when directly imported into Premiere (mp4 file from the camera)

1. Open Premiere Elements 8.0.1 and set the project preset (new project dialog) = PAL AVCHD Full HD1080i25.
2. In the program, Edit Menu/Preferences/General, have a check mark next to "Default Scale to Frame Size".
3. Right click the Edit Mode Monitor, select Magnification, and have the set on "Fit".
4. Using Premiere Elements' Get Media/Files & Folders, import your AVCHD 1920x 1080 16:9 video into the program. (You will see your video in the Organizer.)
5. Drag your video from the Organizer to the Timeline. Are you seeing a 4:3 version of it in the Edit Mode Monitor?
6. If so, click on the Project Tab in the row below the active Organize (Blue) Tab to bring up the Project Media View.
7. In the Project Media View, right click your video in the list to bring up the Interpret Footage dialog.
8. In the Interpret Footage dialog, under Pixel Aspect Raio, dot the "Conform to:" and change the setting = Square Pixels (1.0). After you click OK to that, see what your video now looks like in the Edit Mode Monitor.
Miscelleanous
1. You can also use the Interpret Footage dialog for Frame Rate considerations.
2. Although the gspot read out does not give a reading for PAR (Pixel Aspect Ratio), the PAR can be calculated from the SAR and DAR values given since PAR = DAR/SAR and, in your case, 1.778/1.778 = 1.0. The DAR is Display Aspect Ratio and the SAR is Storage Aspect Ratio.
3. What is the duration (seconds, minutes, hours) of the video that you have been trying to use in Premiere Elements 8.0.1. You are working with AVCHD which is a very resourve demanding format, and it appears that you have 2 GB RAM installs that probably translates in much less available and you do not say how much free hard drive space your computer has. But, if the video in question is only of a few seconds duration, we should be able to work through this pixel aspect ratio issue.
courtesy of AT Romano...

Similar Messages

SWF/FLV files show white/black bars on sides of frame

I have a recurring issue of bars showing up on the left and right side of my swf/flv frames. The good news is the video plays on our site. The bad news is the bars show up on some of the flash files (like on testimonials.html) and not on others (like wedding.html), even though I perceive I'm copying in the same code.
<p>
        <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" width="600" height="366" id="FLVPlayer1">
          <param name="movie" value="FLVPlayer_Progressive.swf" />
          <param name="quality" value="high" />
          <param name="wmode" value="opaque" />
          <param name="scale" value="noscale" />
          <param name="salign" value="lt" />
          <param name="FlashVars" value="&MM_ComponentVersion=1&skinName=Corona_Skin_3&streamName=images/WhyVid eo&autoPlay=false&autoRewind=false" />
          <param name="swfversion" value="8,0,0,0" />
          
          <param name="expressinstall" value="Scripts/expressInstall.swf" />
          
          
          <object type="application/x-shockwave-flash" data="FLVPlayer_Progressive.swf" width="600" height="366">
            
            <param name="quality" value="high" />
            <param name="wmode" value="opaque" />
            <param name="scale" value="noscale" />
            <param name="salign" value="lt" />
            <param name="FlashVars" value="&MM_ComponentVersion=1&skinName=Corona_Skin_3&streamName=images/WhyVid eo&autoPlay=false&autoRewind=false" />
            <param name="swfversion" value="8,0,0,0" />
            <param name="expressinstall" value="Scripts/expressInstall.swf" />
            
            <div>
              <h4>Content on this page requires a newer version of Adobe Flash Player.</h4>
              <p><a href="http://www.adobe.com/go/getflashplayer"><img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" /></a></p>
                </div>
            
              </object>
          
            </object>
      </p>

Hi
1st. I like many other will not download a zip file, can you post a link to the site?
It may be if you are using the same code but only changing the swf/flv file name, that the swf/flv's are smaller than the size specified in your object code - width="600" height="366".
If the swf/flv's size is smaller then the player will be the size specified, but your swf/flv will be centralized inside the player, (unless otherwise specified) resulting in the white/black bars.
PZ

Transcode produces black bars on side in Encore but not AME

I am Transcoding 1920x1080 footage to NTSC widescreen DVD's. If I transcode the footage in Apple Compressor, or Adobe Media Encoder(with 12px top/bottom crop) it comes out correct. If I transcode in Encore, I cannot get rid of the thin black bars on the side. I am setting the crop in the Encore settings but this just creates a border all around and does not solve the problem.When I preview the output, it looks correct in the "Edit Quality Presets" window but has the borders in the timeline. I make a lot of quick one-off DVD's and I'm trying to find ways to just use one piece of software and not create a lot of extra steps. I understand why the crop is needed, I just need to know how to get Encore to give the same result as AME does.
Thanks.

Hey Ann. I couldn't make it work with just setting it to 16:9. It's the same thing as when rendering out a scaled HD square pixel file in a 720x480 (1.21) comp in After Effects. The top and bottom needs a bit of cropping to work in a SD 16:9 world.

Black bars on sides after exporting

I recently downloaded the trial version of Premiere Pro CC which I have never before. When exporting, my project has black bars on both sides and I'm not sure how to fix it. I know little about editing so I'm not sure how to fix this problem. I've tried multiple export setting and in each preview I see the black bars as well. Any help would be greaty appreciated. Thanks!

Your photo of the Sequence Settings tells only part of the story. The other parts:
your media: with a clip selected in the Project panel, go to the Info panel and report the frame dimensions.
your export settings: go File>Export>Media and post a screengrab of the Export Settings dialog with the Video tab visible. [btw, a screengrab will be easier for us to read than a photo of your screen...]
Since your source is NTSC DV (720x480 pixels at 0.9091 pixel aspect ratio), you should ideally pick an output preset that matches. For example, h.264/NTSC DV. [If you tell us how you plan to distribute the video, we can give more directed advice on which format to use.]

Black bars on sides of video

My video is 4x3, but in the preview window it comes up 16x9 and puts black bars on the sides of the video.
How can I correct this without starting over? Here is what I am talking about:
http://gallery.me.com/nickrooney#100069/Picture%201&bgcolor=black

Answer found here: http://discussions.apple.com/thread.jspa?messageID=7734136&#7734136
You can copy all footage into a correctly formatted sequence. Select all the files and right click to "Remove Attributes" and verify Distort is checked. Ta-Da!!!
Note: if you've changed other attributes make sure you only change distort.

Samsung monitor shows black bars on sides

I'm running OS 10.8.2 on a mid-2012 MacBook Pro, and I recently bought a Samsung Syncmaster SA300 (22 inch) monitor which I've connected using a VGA cable (DVI wasn't working, don't know why). I immediately noticed black bars on the sides of the screen, and the picture seems squished, despite the fact that I've chosen the proper resolution for the monitor. Funny thing is, when I boot into Windows 7, the bars disappear and the resolution looks perfect.

Hello MpegEVIL,
I would recommend taking a look at this article named Apple computers: Troubleshooting issues with video on internal or external displays found here http://support.apple.com/kb/ht1573
I feel this article has the best troubleshooting steps for you.

Removing black bars down sides of clip?

Hello
I am editing a movie clip in Premier Elements 11. It's a 25fps file. I did not film the clip, but was told that it was a normal (not widescreen) PAL clip. The clip looks like this when I am editing it (screenshot).
What concerns me are those two thick black bars down both sides of the clip. What causes them, please? Is it that the clip was really widescreen and I am editing it in normal mode and how best to remove them as I imagine they will be visible when the final product is show on a DVD or TV.
Many thanks.
Steve

kissakikai
In your other thread
https://forums.adobe.com/thread/1705170
I wrote
For now my messages to you will have to be read only because of the reply issues.
1. Please go to your home computer (no mobile device). In the browser (Firefox or Internet Explorer), type in the Adobe address http://www.adobeforums.com, sign in there with your Adobe ID and Password. Go to the Adobe Premiere Elements Forum where you search for and find your thread. Open the thread and try to reply to one of my messages by clicking the Reply button. Do you now see the Reply button to do that whereas before you could not.
2. Also, go to your browser's Options/Advanced/Network and its Cached Web content and clear the Cached Web content.
3. If you need to use a mobile device for communicating with the forum, do you have another mobile device that you could try to use?
After you send the reply, if it arrives with no message as before, that will tell us that the above were not the answer for that problem.
As for the Premiere Elements 13.1 Update, we will move on that as soon as possible when you can report back on what worked or did not.
Do not give up.
You have just sent another reply without a message in it. So, I am concluding that none of the above has solved the posting problem. I meant for you to reply in
your own thread, but that is OK because we are going to try for another communication route to workaround the posting in the thread problem.
Let us try the troubleshooting using the Adobe Private Message system. Later when we resolve the problems, then we can write back in the forum thread
to let everyone know the outcome.
In post 8 of this thread, click on my ID AT Romano. That will open my profile page. Look to the right to find an orange envelope. Click on the orange envelop
to open to an emailing area. For now, just try to send a quick message, like "I am here." If that works, we will continue with details back and forth until we
gain success with all the problems.. If that does not work, then post again in this thread. Another blank reply here will tell me that you sent the email which I did not get.
Thank you.
ATR

Video taken from Iphone vertically has thick black border around it when uploaded to youtube. Any way to fix?

I edited a bunch of clips taken from my Iphone, some vertical some horizontal. I put them together on Final Cut Pro but when uploaded to youtube, the clips recorded vertically have thick black edges and the video itself looks tiny! Is there any way to fix this? Please help!

You need to sort some stuff out.
Your source is pal 25 frames in SD
Your offline footage is HD with a framerate 29.97.
You need to set your sequence the same as your footage.
Then export again with the same framerate.

PAL DVD WS export: why black bars at sides?

I am editing a 1920x1080 EXCAM HD sequence in Premiere Pro CS6.01 on Win7x64.
I want to export to PAL Widescreen DVD.
When I use the PAL WS presets to export from Premiere I get black bars on either side of the MPEG2 DVD footage.
Why is this?
Both 1920x1080 and PAL WS are 16:9 (aren't they?). So why am I getting the black bars? Shouldn't the PAL DVD footage fill the entire width of the frame?
Any ideas why I get these black bars? And even better, how I can get rid of them?
Cheers
Mark

Why is this?
Before the age of digital video, it was decided by technocrats that what we see in the end product (called the Clean Aperture) would be different from what was there in the original (called the Production Aperture). They left off some pixels at the side when they made the calculation for the widescreen Pixel Aspect Ratio. That process has unfortunately carried over onto digital video, and we're still using that same old analog PAR, instead of what we should be using when you calculate it for the entire frame. This results in the black bars you see.
In CS6, this is easily overcome by selecting Scale to Fill in the Export settings.

Black bar left side when importing

When importing Quicktime HDV 1080i60 video into an HD project, I wind up with a black bar on the left side of the movie. I've tried every combination of HD format and preference setting. Can anyone explain what I'm doing wrong?

For everyone who is interested, I tried some more things:
I had a long phone call today with Apple Support (when upgrading to Mountain Lion you get 90 days phone support again) and we did similar things.
First: change the settings - didnt work
Second: Option+Cmd+P+R to reset PRAM - didnt work either
Third: create a new partition, clean install mountain lion and see if the problem still exists. At the beginning it worked but after once changing the resolution it cant get back to the correct displaying anymore. Same problem also.
They said that then it is probably the fact that the driver of the display doesnt work with ML - I should contact Acer now.
Or I should get back to the technical helpdesk again.
Will try both...
But it means that it is a software issue caused by ML.
Keep on trying...

How to add black bars to SIDES of image? Using 'Crop' won't work for this. I explain why.

I have some clips that are off axis and I applied a bit of tilt to correct them. However, I now need to crop the sides giving me a 1.66:1 effect inside the 1.85:1 frame. But how/ Using CROP in Premiere Pro just crops the image off axis. Here is a screen grab...
How can I get a nice, perfect side crop? I've searched, folks, so would appreciate some guidance. Thanks!

4 point garbage matte to crop.
Or overlay a title with black pillars.

How do I get rid of small black bars on sides of the videos

I'll attach an image below to show you what I'm talking about. The settings on the video should be correct as I dragged the video from the project window to new item and selected new sequence.
One thing I tried that seemed to work was in the workspace window where it shows the clips I've edited together, I've streched it out a bit. That worked good, except it did the same thing to all clips. Should I just take the main clip and stretch it and then export it, then go from there? Any other ideas? Thanks.

Or if its only on 1 clip you can just go to the effects control tab for that clip and scale up a bit.

Black bars on youtube videos coming from adobe premiere elements 10?

Every single video that I have edited on this programme, once saved, has come up on youtube with the black bars either side of it. I've tried to fix it but havent been able to. I believe its something to do with the setting that I saved it as but I'm not sure which setting to pick to get the right ratio for the youtube screen. Any gelp Would be most appreciated.

Coolbeans
We will need more information to look for the cause of the issue that you are describing.
1. On what computer operating system is your Premiere Elements 10 running? And, what is the video card that the computer uses?
2. What are the properties of the video that you are using when this issue occurs? I am looking for video and audio compression, frame size, frame rate, interlaced or progressive, file extension, pixel aspect ratio.
3. What are you setting as the project preset for this project? The project preset should match the properties of your source video.
4. How are you uploading your Timeline content to YouTube....
a. Are you exporting your Timeline content to a file saved to the computer hard drive and then uploading that file to YouTube at the YouTube web site? If so, please give all the export settings including any customization of the export settings under the Advanced Button of the preset selected.
or
b. Are you using the program feature Share/Computer/Online/YouTube? If so, what preset are you selecting for this upload?
Please review, supply the requested information, and then we will move forward from there.
Thank you.
ATR

Vertical Black Bars

Hi,
Not sure whether this is the right forum but here goes: -
I am experiencing a problem playing back widescreen DVDs in Windows Media Player 11.
The video does extend the full width of the screen. Instead it has black bars either side.
The file properties (in WMP) say it is 4:3 (hence the black bars). I know this NOT to be the case and it plays fine in WMP on another computer.
16:9 video files (mpeg2) play fine and are identified correctly.
Ati Radeon X1600SE (see https://forum-en.msi.com/index.php?topic=103427.0)

Using 8.28 supplied by HP (their latest).
Tried latest from ATI but had an issue, see https://forum-en.msi.com/index.php?topic=103427.0 (this link also has my current video card info).
Not sure what codec WMP is using as it is not listed when I show file properties when playing.
If I play an MPG file generated from ulead videostudio it displays ok (16:9) and WPM uses a cyberlink decoder.
When I burn this file to DVD with added menus i get the issue, but also with retail widescreen DVDs

[Solved] On fullscreen flash videos (like on YouTube) there is a black bar on the right side of the screen, and I must click slightly to the right of onscreen buttons instead of directly on them while this is happening.

On fullscreen flash videos (like on YouTube) there is a black bar on the right side of the screen, and I must click slightly to the right of onscreen buttons instead of directly on them while this is happening. It's like I should click where they should be, not where they are. The exact same problem happens on Google Chrome, but not on Internet Explorer. It also happens on some games I installed like, "Crysis".

Nevermind, I solved the problem by downloading this:
http://www2.ati.com/DriVeRs/mobile/11-6_mobility_vista_win7_64_dd_ccc_ocl.exe

Black Bars on Sides & Poor Upload to YouTube

Similar Messages

Maybe you are looking for