Blackberry z10 did not switch ON after upgrading to 10.3.1 os

i upgraded to my z10 to 10.3 os after upgrading none of my applications were  responding...after 2 days the phone shut downs because of low battery ...after charging the phone it doesn't switch ON it stucks on finalizing device setup....and it also heating up while charging....plz help

Duplicate:http://supportforums.blackberry.com/t5/BlackBerry-Z10/blackberry-z10-did-not-switch-ON-after-upgrading-to-10-3-1-os/m-p/3114716#nobanner

Similar Messages

  • Safari and Stickies did not work accurately after upgrade Lion 10.7.3

    1. Safari: version 5.1.5 and other before cannot show charts  and other buttons in the homepage of www.comdirect.de. (Firefox does it) Asking technical staff of comdirect, they told me: "it is a known problem of safari. Safari does not meet the standards". Up today there is no improvement in the divers updates of Safari.
    2. Stickies: Working some weeks with Lion,  two icons of the stickie-programm suddenly apeared in the Dock. Version 7.0, 874KB and Version 8.0 5,2 MB. Results:
    Moving a stickie,  caused its duplication, other were lost.
    Putting the Version 7.0 into the trash, it install themselves again but more and more stickies disappeared.
    I want my stickies back, at what location are they stored? What can I do to solve the problems 1) und 2)?
    Thanks for a praktikable proposal.
    Klaus 186

    So the result form Apple authorized servis was that both motherboard and graphic card need to be replaced (cost aproximatelly 1100$) and in addition they said there will still remain some problem with display which would cost additional 500$ to fix. Taken in account that there would be only 90 days warranty on new parts I decided to give up with the iMac. Very disappointing after only 1,5 year on machine that costed more than 2000$.
    Recommendation from me after this experience - buy 3 years warranty if possible. I am personally very much looking forward for Mac Pro refresh. I don't want to be again in situation that if something breaks in my working machine I have no chance to replace it myself and can only expect very high repair costs. Untill new Mac Pros are out I'll suffer working on Mac Book Pro.

  • Safai and Stickies did not work accurately after upgrade lion

    Hallo,
    1. Safari: Version 5.1.5 and other before cannot show charts  and other buttons in the homepage of www.comdirect.de. (Firefox does it) Asking technical staff of comdirect, they told me: "it is a known problem of safari. Safari does not meet the standards". Up today there is no improvement in the divers updates of Safari.
    2. Stickies: Working some weeks with Lion,  two icons of the stickie-programm suddenly apeared in the Dock. Version 7.0, 874KB and Version 8.0 5,2 MB. Results:
    Moving a stickie,  caused its duplication, other were lost.
    Putting the Version 7.0 into the trash, it installs themselves again but more and more stickies disappeared.
    I want my stickies back, where are they stored? What can I do to solve the problems 1) und 2)?
    Thanks for a praktikable proposal.
    Klaus 186

    B-Tron wrote:
    First off, if I had have unchecked "preserve user accounts and network settings" check box, would I then have had the fresh, 'new', and cleared out operating system I was hoping for?
    Yes. That is correct. The only problem that might crop here is if there is something wrong at the disk-level or file-system-level that transcends the content of the system being installed. For this reason, some people like to wipe (reformat) their hard drive before doing a clean install.
    Secondly, all my data from Tiger is in 'Macintosh HD', so it seems that anything that is in Previous Systems is a duplicate. Am I therefore safe to delete that folder? I checked the Library folder in Previous Systems, and it is identical to the Library folder in 'Macintosh HD'. I find this strange, because if everything in Previous Systems is a duplicate, doesn't that defeat the purpose of Archive and Install and simply waste memory?
    Not everything. Because of the "archive and install" method, the installer doesn't try to upgrade your old system, it just archives it and installs a new one. Then it pulls over your old user accounts.
    If you are sure you don't need any of the files from that previous system, then "yes," you can delete it.
    You might find this article of interest <http://www.macfixit.com/article.php?story=20071026082852658>. I think it addresses some of your concerns.

  • Lumia 635 - MixRadio did not switch

    Broke my Nokia 520, upgraded to Nokia 635. When switching account over Nokia radio did not switch, and now why do I have to buy same product again!
    Moderator's Note: The subject was edited as we have moved the post from an existing thread and created a new topic.

    You don't need to get the same model. As long as you use the same Nokia Account as you used on the previous phone then your account should be there with no problem.
    If you are in India and using the Unlimited service, then it is essential that you used the same Nokia Account otherwise your ophones inbuilt licence has linked to whatever account you did use and that cannot be changed.

  • HT1688 My iphone 5 does not ring anymore after upgrading to ios 7.0.2

    My iphone 5 does not ring anymore after upgrading to ios 7.0.2.  It did not happen right away, but maybe 2 weeks ago.  I tried turning the "do not disturb" on and add allow everyone to call as well as turning it off but it only vibrates when calls come in.  I also turned my phone off and it still only vibrates when calls and messages come in.

    I found another feed and said there is a silent button next to volume bar.  That was the problem.

  • My phone will not turn on after upgrade

    I did not complete the OS7 upgrade this weekend and my phone battey died last night after it died the phone goes to screen asking to plugin into Itunes which I do and nothing happens.  I went to Verizon and they could not restart it either and it is out of warranty It is iphone 4.  Any suggestions please

    You need the latest version of iTunes on your computer to connect iOS 7  to it.
    Here's some advice that may help:
    you'll need to put the device into Recovery Mode and then try the Restore again:
    http://support.apple.com/kb/ht1808
    If that still doesn't work, as a last resort try DFU mode:
    http://www.iclarified.com/entry/index.php?enid=1034

  • There is a problem on my mac mini. I install windows7 in my mac then i cancelled the installation did not finish..after that i saw the black screen on my monitor..

    There is a problem on my mac mini. I install windows7 in my mac then i cancelled the installation did not finish..after that i saw the black screen on my monitor untill now the monitor is black..

    It maybe trying to boot from the incomplete install.
    Try starting your Mac while holding down the Option key, it should then list all the available boot drives including the Mac OS X one. Boot from the Mac one and then you can wipe the damaged PC one or set the Mac to stay booting in to OS X.

  • 16 mo young Mac Pro will not turn on. Dead. Why. No problems ever! Installed Yosemite and did not boot up after. Did that kill it? To young to die. What

    16 mo young Mac Pro will not turn on. Dead. Why. No problems ever! Installed Yosemite and did not boot up after. Did that kill it? To young to die. What happened?what do I do now??????? Help!

    Note that you don't have a Mac Pro as stated. Your profile says you have a MacBook Pro. Please clarify as they are entirely different computers. If nothing below works for you, then make a Genius Appointment and take it in for service.
    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the
         computer and after the chime press and hold down the OPTION key until the boot manager
         screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2

    Time machine fails backing up with a "backup disk not found" error after upgrade to Lion 10.7.2. I've erased and reformatted the drive; reconnected Time Machine(it saw it) and began a new backup. The backup starts again but fails before completing with backup drive not found error. I used the 10.7.2 combo update. Any help on how to fix this problem would be appreciated.

    Arghhhhhhhhhhhhhhhhhhh!!!!!!
    After waiting since October for a fix, I have now upgraded the firmware on the Time Capsule and installed the new Airport Utility, released yesterday, and the situation is even worse.
    Up until now, the Airport Utility had an option to disconnect all drives manually and the Time Capsule would then work until the next reboot – a temporary (?) work-around.
    Now that option does not exist in the new-look Airport Utility. And the Airport Utility installation can’t be rolled back and the old utility won’t restore.
    The sparesbundle is still not accessible. Anyone worked out a work-around in the new environment yet?
    I have another Time Machine backup working fine to a trusty old Lacie Drive so erased the one on my Time Capsule to see if that works. I have renamed the Capsule and the Time Capsule Drive.  But to build another full backup will take at least two days and I shall be away from tomorrow and am reluctant to leave the Capsule and computer up and running for a week. And I’ll bet the sparsbundle will still be nowhere to be found.
    How can Apple screw up so badly when they are to become the richest company in the entire world and – soon – will have more cash in the bank than the entire United States? Can’t they afford someone who really can sort this out? Especially when a Firewire connected hard drive – my trusty and simple LaCie – works fine.
    Words, almost, fail me.

  • Wifi is not working properly after upgrading 7.1.1 onmy i4s

    Dear Apple
                      i realy appriciate on your work ..right now i am suffreing from a problem that one i mentioned in subject .sometime my wifi is working good and sometime it shos dead to me ..but now its not working well after upgrading my phone on 7.1.1....
    its my humble request please find a solution and provide me as soon as possble..
    my totally work on wifi .
      and sometime it goes hang in setting when i come on setting folder and clicked on wifi its get hang and also showing wifi is not availabe..please provide me best solution
      Thanx & Regards
        Sam
      +91-92555-04628

    settings - general - reset - reset network settings.

  • A connection attempt failed because the connected party did not properly respond after a period of time

    Prior to the Increase Capacity for Outbound Network Calls update, my Azure websites running in
    Standard mode experienced occasional connection attempt failed errors. Since this update the errors stopped but starting on 12/30/14, these errors started up again on both
    South Central and East regions:
    "A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond [IP]:80"
    It occurs when attempting to consume an external web service over HTTP. This issue is not reproducible on our local environments nor did it occur with our previous shared hosting provider.
    On Azure, the same web service call can result in this error or will return a response successfully.
    There doesn't appear to be any pattern as to why the same call would work one time but not another.
    How can this be resolved again? Any feedback is appreciated. Thanks.

    Hi,
    Please have a look at this article:
    http://blogs.msdn.com/b/narahari/archive/2011/12/21/azure-a-connection-attempt-failed-because-the-connected-party-did-not-properly-respond-after-a-period-of-time-or-established-connection-failed-because-connected-host-has-failed-to-respond-x-x-x-x-x-quot.aspx,
    it gives us several ways to solve this issue, hope this helps.
    Best Regards,
    Jambor 
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Elements 11 is not running anymore after upgrading my Mac to Mountain Lion

    Elements 11 is not running anymore after upgrading my Mac to Mountain Lion

    PSE11 does work OK with Mountain Lion but you need to delete the saved prefs and application state.
    Quit Elements.
    Launch Finder and click on Go (hold down the optn key) and click on Library when it appears in the list below Home.
    Delete the following files from the Preferences folder:
    com.adobe.PhotoshopElements.plist    
    Adobe Photoshop Elements 11 Paths
    Adobe Photoshop Elements 11 Settings
    Delete this file from the Saved Application State folder:
    com.adobe.PhotoshopElements.savedState

  • HT201412 My text messages go to my ipad but not my iphone after upgrading to ios7.0.2, does anyone know a fix

    My text messages go to my ipad but not my iphone after upgrading to ios7.0.2, does anyone know a fix

    They are not text messages, they are iMessages.
    Turn on iMessage on the iPhone.

  • Contact addresses not showing up after upgrading to ios 7

    Contact addresses not showing up after upgrading to ios 7

    Contact addresses not showing up after upgrading to ios 7

  • Hi, my iphone could not be activated after upgrade it from IOS4 to IOS6, it shows that is due to activation server is unavailable and no sim card in the iphone. Anyone can help me please?

    Hi, my iphone could not be activated after upgrade it from IOS4 to IOS6, it shows that is due to activation server is unavailable and no sim card in the iphone. Anyone can help me please?

    It is 99% hacked/jailbroken iPhone to use a different carrier than intended. You have to put the sim from the original carrier or ask them to unlock the iPhone. We as well as Apple cannot help you with this.

Maybe you are looking for