Blank inventory reports

Hi
Know there's this thread on the same problem, but no respond.
http://forums.novell.com/novell/nove...ation-zcc.html
Now, I have this problem to. When choosing "Detailed Hardware/Software Inventory" (of a device) or any of the "Inventory Standard Reports" and "Inventory Custom Reports" a new window opens, BUT this is blank. No errors i shown.
How to check for errors? Should I look in the ZCC log or is it another place to start looking?
Any other seen this behavior?
Need more info?
Thanks

Oh well... No big errors in the report, but after a reboot of all the servers the inventory is back
Originally Posted by spond
Nop1983,
always start by running ZDC to see if all's well...
Shaun Pond

Similar Messages

URGENT inventory reports

Hi friends,
I would like to see a report by Product line/Profit center,
I checked these reports, MCBE,MMBE,MCBC,ME80AN. Where I dont see any field that can show Profit center,
And also I would like to see a inventory report by material, qty, batch, and serial number.
Please let me know if we have any report like that ,

this will help you
*& Report Z_OPEN_CLOSE                                                *
REPORT Z_OPEN_CLOSE MESSAGE-ID YW2 LINE-SIZE 231 LINE-COUNT 45
NO STANDARD PAGE HEADING.
Type Declaration *
TYPE-POOLS SLIS.
Tables *
TABLES: MKPF, " Material Document: Header Data
        MSEG, " Material Document: Item Data
        MARA,
        MARD,
        S031,
        EKKO,
        EKPO,
        LIKP,
        MAKT,
        J_1IWRKCUS,
        T001W,
        WB2_V_MKPF_MSEG2,
        MMIM_REP_PRINT,
        YW2_STKMOVEMENTS,
        YPLNT,
        MARDH.
Internal Tables *
DATA: I_WERKS LIKE J_1IWRKCUS OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_YPLNT OCCURS 0,
         PPLNT LIKE YPLNT-PPLNT,
         WPLNT LIKE YPLNT-WPLNT,
      END OF I_YPLNT.
DATA: BEGIN OF I_MKPF OCCURS 0,
        MBLNR LIKE MKPF-MBLNR,
        MJAHR LIKE MKPF-MJAHR,
        BUDAT LIKE MKPF-BUDAT,
        VGART LIKE MKPF-VGART,
        BWART LIKE MSEG-BWART,
        MATNR LIKE MSEG-MATNR,
        WERKS LIKE MSEG-WERKS,
        LGORT LIKE MSEG-LGORT,
        MENGE LIKE MSEG-MENGE,
        MEINS LIKE MSEG-MEINS,
        KUNNR LIKE MSEG-KUNNR,
        ZEILE LIKE MSEG-ZEILE,
        XAUTO LIKE MSEG-XAUTO,
        SHKZG LIKE MSEG-SHKZG,
        MATNR1 LIKE MSEG-MATNR,
      END OF I_MKPF.
DATA: BEGIN OF I_MARDH OCCURS 0,
       WERKS LIKE MARDH-WERKS,
       MEINS LIKE MARA-MEINS,
       MATNR LIKE MARDH-MATNR,
       LGORT LIKE MARDH-LGORT,
       LABST LIKE MARDH-LABST,
       LFGJA LIKE MARDH-LFGJA, "Added -MB
       LFMON LIKE MARDH-LFMON, "Added -MB
       PERIO(6),
       INSME LIKE MARDH-LABST,
       EINME LIKE MARDH-LABST,
       SPEME LIKE MARDH-LABST,
       RETME LIKE MARDH-LABST,
       O_STK LIKE MARDH-LABST, " Opening Stock
       C_STK LIKE MARDH-LABST, " Closing Stock
      END OF I_MARDH.
DATA: BEGIN OF I_MARD OCCURS 0,
       WERKS LIKE MARD-WERKS,
       MATNR LIKE MARD-MATNR,
       LGORT LIKE MARD-LGORT,
       LABST LIKE MARD-LABST,
       INSME LIKE MARD-LABST,
       MEINS LIKE MARA-MEINS,
       EINME LIKE MARD-LABST,
       SPEME LIKE MARD-LABST,
       RETME LIKE MARD-LABST,
      END OF I_MARD.
DATA: I_MARD1 LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: I_MARDH1 LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_MKPF1 OCCURS 0,
        MBLNR LIKE MKPF-MBLNR,
        WERKS LIKE MSEG-WERKS,
        MATNR LIKE MSEG-MATNR,
        BUDAT LIKE MKPF-BUDAT,
        BWART LIKE MSEG-BWART,
        MJAHR LIKE MKPF-MJAHR,
        VGART LIKE MKPF-VGART,
        LGORT LIKE MSEG-LGORT,
        MENGE LIKE MSEG-MENGE,
        MEINS LIKE MSEG-MEINS,
        XAUTO LIKE MSEG-XAUTO,
        SHKZG LIKE MSEG-SHKZG,
      END OF I_MKPF1.
DATA: BEGIN OF I_MKPF2 OCCURS 0,
       WERKS LIKE MSEG-WERKS,
       MATNR LIKE MSEG-MATNR,
       BUDAT LIKE MKPF-BUDAT,
       BWART LIKE MSEG-BWART,
       MJAHR LIKE MKPF-MJAHR,
       VGART LIKE MKPF-VGART,
       LGORT LIKE MSEG-LGORT,
       MENGE LIKE MSEG-MENGE,
       MEINS LIKE MSEG-MEINS,
       XAUTO LIKE MSEG-XAUTO,
     END OF I_MKPF2.
DATA: BEGIN OF I_FINAL5 OCCURS 0,
       WERKS LIKE MSEG-WERKS, " Plant
       MATNR LIKE MSEG-MATNR, " Material
       LGORT LIKE MSEG-LGORT, " Storage Location
       BUDAT LIKE MKPF-BUDAT, " Posting Date
       MTART LIKE MARA-MTART, " Material Type
       SPMON LIKE S031-SPMON, " Month
       MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
        MEINS LIKE MSEG-MEINS,
        O_STK LIKE MARDH-LABST, " opening stock
        TRECEP LIKE MARDH-LABST, " total receipts
        PRODU LIKE MARDH-LABST, " Net Receipts - Production
        RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
        SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
        TDISP LIKE MARDH-LABST, " total dispatches
        CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
        OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
        TLOSS LIKE MARDH-LABST, " Total Loss
        TRLOSS LIKE MARDH-LABST, " Transit Loss
        WHLOSS LIKE MARDH-LABST, " Warehouse Loss
        C_STK LIKE MARDH-LABST, " Closing Stock
        TRFSTK LIKE MARDH-LABST, "Transfer stock
        MENGE LIKE MSEG-MENGE,
        OTHADJ LIKE MARDH-LABST,
      END OF I_FINAL5.
DATA: BEGIN OF I_FINAL OCCURS 0,
        WERKS LIKE MSEG-WERKS, " Plant
        MATNR LIKE MSEG-MATNR, " Material
        BUDAT LIKE MKPF-BUDAT, " Posting Date
        MTART LIKE MARA-MTART, " Material Type
        SPMON LIKE S031-SPMON, " Month
        MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
        MEINS LIKE MSEG-MEINS,
        O_STK LIKE MARDH-LABST, " opening stock
        TRECEP LIKE MARDH-LABST, " total receipts
        PRODU LIKE MARDH-LABST, " Net Receipts - Production
        RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
        SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
        TDISP LIKE MARDH-LABST, " total dispatches
        CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
        OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
        TRFSTK LIKE MARDH-LABST, "Material Transfer stock
        TRLOSS LIKE MARDH-LABST, " Transit Loss
        WHLOSS LIKE MARDH-LABST, " Warehouse Loss
        TLOSS LIKE MARDH-LABST, " Total Loss
        C_STK LIKE MARDH-LABST, " Closing Stock
        OTHADJ LIKE MARDH-LABST,
       END OF I_FINAL.
DATA: I_FINAL1 LIKE I_FINAL OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_FINAL_TEMP OCCURS 0,
        WERKS LIKE MSEG-WERKS, " Plant
        MATNR LIKE MSEG-MATNR, " Material
        MTART LIKE MARA-MTART, " Material Type
        MAKTX LIKE MAKT-MAKTX, " Description
        MEINS LIKE MSEG-MEINS,
        O_STK LIKE MARDH-LABST, " opening stock
        TRECEP LIKE MARDH-LABST, " total receipts
        PRODU LIKE MARDH-LABST, " Net Receipts - Production
        RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
        SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
        TDISP LIKE MARDH-LABST, " total dispatches
        CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
        OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
        TRFSTK LIKE MARDH-LABST, "Material Transfer stock
        TRLOSS LIKE MARDH-LABST, " Transit Loss
        WHLOSS LIKE MARDH-LABST, " Warehouse Loss
        TLOSS LIKE MARDH-LABST, " Total Loss
        C_STK LIKE MARDH-LABST, " Closing Stock
        OTHADJ LIKE MARDH-LABST,
      END OF I_FINAL_TEMP.
For Materials
DATA: BEGIN OF I_MARA OCCURS 0,
       MATNR TYPE MARA-MATNR,
       MTART TYPE MARA-MTART,
       MEINS LIKE MARA-MEINS,
       LABST TYPE MARD-LABST,
       MAKTX LIKE MAKT-MAKTX,
      END OF I_MARA.
DATA: BEGIN OF I_STKMVMNTS OCCURS 0,
       BWART LIKE MSEG-BWART,
       SHKZG LIKE MSEG-SHKZG,
       VZBEW LIKE YW2_STKMOVEMENTS-VZBEW,
      END OF I_STKMVMNTS.
DATA: BEGIN OF I_FINALT OCCURS 0,
       WERKS LIKE MSEG-WERKS, " Plant
       MATNR LIKE MSEG-MATNR, " Material
       BUDAT LIKE MKPF-BUDAT, " Posting Date
       MTART LIKE MARA-MTART, " Material Type
       SPMON LIKE S031-SPMON, " Month
       MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
       MEINS LIKE MSEG-MEINS,
       O_STK LIKE MARDH-LABST, " opening stock
       TRECEP LIKE MARDH-LABST, " total receipts
       PRODU LIKE MARDH-LABST, " Net Receipts - Production
       RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
       SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
       TDISP LIKE MARDH-LABST, " total dispatches
       CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
       OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
       TRFSTK LIKE MARDH-LABST, "Material Transfer stock
       TRLOSS LIKE MARDH-LABST, " Transit Loss
       WHLOSS LIKE MARDH-LABST, " Warehouse Loss
       TLOSS LIKE MARDH-LABST, " Total Loss
       C_STK LIKE MARDH-LABST, " Closing Stock
       OTHADJ LIKE MARDH-LABST,
       MONTH(8) ,
      END OF I_FINALT.
DATA: IMKPFT LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT1 LIKE I_MKPF1 OCCURS 0 WITH HEADER LINE.
DATA: IMARDT LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: IMARDHT LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: T_FINAL LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT2 LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
FCAT is used for the field catalog
DATA: FCAT TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
                  WITH HEADER LINE INITIAL SIZE 0,
for excluding the ICONs from the application toolbar
      FEXC TYPE TABLE OF SLIS_EXTAB WITH NON-UNIQUE DEFAULT KEY
                 WITH HEADER LINE INITIAL SIZE 0,
FS_LAYO is used for Grid Layout
      FS_LAYO TYPE SLIS_LAYOUT_ALV,
FEVENTS to handle the events TOP OF PAGE & USER_COMMAND
      FEVENTS TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
                 WITH HEADER LINE INITIAL SIZE 0,
FHEADER is used for List header
      FHEADER TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT KEY
                 WITH HEADER LINE INITIAL SIZE 0,
sort is used for sorting
      FSORT TYPE TABLE OF SLIS_SORTINFO_ALV WITH NON-UNIQUE DEFAULT KEY
                 WITH HEADER LINE INITIAL SIZE 0,
      FCAT1 TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
                WITH HEADER LINE INITIAL SIZE 0,
      FS_LAYO1 TYPE SLIS_LAYOUT_ALV,
      GT_LIST_TOP_OF_PAGE1 TYPE SLIS_T_LISTHEADER,
      FEVENTS1 TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
             WITH HEADER LINE INITIAL SIZE 0,
       FHEADER1 TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT
              KEY WITH HEADER LINE INITIAL SIZE 0,
       G_STATU_071 TYPE SLIS_FORMNAME VALUE 'Z_PFSTATUS',
       ALV_VARIANT1 LIKE DISVARIANT.
Variable Declaration *
TYPES: TRFF_TYPE_DEC_6_5(6) TYPE P DECIMALS 5.
DATA: FYEAR(4),
      MON(2),
      FYEAR1(4),
      MON1(2),
      OBAL LIKE MARD-LABST,
      CBAL LIKE MARD-LABST,
      INDEX TYPE I,
      COUNT,
      COUNT1 TYPE I,
      O_STK TYPE P DECIMALS 3,
      C_STK TYPE P DECIMALS 3,
      V_MJAHR LIKE MKPF-MJAHR,
      MONTHS TYPE TRFF_TYPE_DEC_6_5,
      MONTH TYPE I.
Global variables for handling ALV functionality
DATA: ALV_KEYINFO TYPE SLIS_KEYINFO_ALV,
      ALV_VARIANT LIKE DISVARIANT,
      ALV_LAYOUT TYPE SLIS_LAYOUT_ALV,
      ALV_REPID LIKE SY-REPID,
      ALV_PRINT TYPE SLIS_PRINT_ALV,
      ALV_DETAIL_FUNC(30),
      ALV_DEFAULT_VARIANT LIKE DISVARIANT-VARIANT,
      ALV_COLOURIZE_FIELDS LIKE MMIM_REP_PRINT-COLOR.
RANGES: R_BUDAT FOR MKPF-BUDAT.
*Added by Prabhu for year on 26.4.05.
DATA: IDATE LIKE R_BUDAT OCCURS 0 WITH HEADER LINE.
Selection Screen Elements *
SELECTION-SCREEN BEGIN OF BLOCK BLK WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_WERKS FOR MARD-WERKS OBLIGATORY NO INTERVALS.
PARAMETER: P_SPMON LIKE S031-SPMON NO-DISPLAY .
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR OBLIGATORY,
                  S_LGORT FOR MSEG-LGORT NO-EXTENSION NO INTERVALS,
                  S_MBLNR FOR MKPF-MBLNR,
                  S_BUDAT FOR MKPF-BUDAT OBLIGATORY .
SELECTION-SCREEN END OF BLOCK BLK.
SELECTION-SCREEN BEGIN OF BLOCK BLK3 WITH FRAME TITLE TEXT-004.
      PARAMETER : MTART LIKE MARA-MTART DEFAULT 'FERT' NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK BLK3.
SELECTION-SCREEN BEGIN OF BLOCK BLK2 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN END OF BLOCK BLK2.
ADDED BY PRABHU FOR DAY-WISE REPORT.
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-007.
PARAMETERS: D1 RADIOBUTTON GROUP P1 DEFAULT 'X',
              M1 RADIOBUTTON GROUP P1,
              Y1 RADIOBUTTON GROUP P1.
SELECTION-SCREEN END OF BLOCK B3.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-006.
PARAMETERS: ALV_DEF LIKE DISVARIANT-VARIANT.
SELECTION-SCREEN END OF BLOCK B2.
DATA: S_BUDAT1 LIKE S_BUDAT OCCURS 0 WITH HEADER LINE."prabhu
Initialization *
INITIALIZATION.
PERFORM ALV_INIT.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR ALV_DEF.
PERFORM ALV_F4.
At Selection Screen
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_spmon.
PERFORM monat_f4.
At Selection Screen *
AT SELECTION-SCREEN.
checking for the layout
PERFORM ALV_CHECK.
authorisation check for the Plant
PERFORM auth_check.
Validation for the Plant
PERFORM VALIDITY_CHECK.
IF MTART NE 'FERT'.
    MESSAGE E041 WITH 'Material Type must be FERT Only...'.
ENDIF.
IF D1 = 'X'." On 26.4.05.
    P_SPMON0(4) = S_BUDAT-LOW0(4).
    P_SPMON4(2) = S_BUDAT-LOW4(2).
ELSE.
    P_SPMON0(4) = S_BUDAT-LOW0(4).
    P_SPMON4(2) = S_BUDAT-LOW4(2).
ENDIF.
LOOP AT S_BUDAT.
    IF S_BUDAT-HIGH IS INITIAL.
      S_BUDAT-HIGH = S_BUDAT-LOW.
      MODIFY S_BUDAT.
    ENDIF.
ENDLOOP.
IDATE-LOW = S_BUDAT-LOW.
IDATE-HIGH = S_BUDAT-HIGH.
CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
    EXPORTING
       I_DATE_FROM = IDATE-LOW
       I_DATE_TO = IDATE-HIGH
   IMPORTING
E_DAYS =
      E_MONTHS = MONTH
E_YEARS =
DATA: I(3) TYPE C.
I = S_BUDAT-LOW+4(2).
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*added by Prabhu for Only for Oneday.on 18.5.5
IF MONTH EQ '0'.
    MONTH = MONTH + 1.
ENDIF.
*added by Prabhu for Only for Oneday.on 18.5.5
DO MONTH TIMES.
    R_BUDAT-LOW = S_BUDAT-LOW.
    APPEND R_BUDAT.
ENDDO.
I = 0.
LOOP AT R_BUDAT.
    R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2) + I.
    I = I + 1.
    R_BUDAT-LOW+6(2) = '01'.
    MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
    CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
       EXPORTING
         DAY_IN = R_BUDAT-LOW
       IMPORTING
         LAST_DAY_OF_MONTH = R_BUDAT-HIGH
      EXCEPTIONS
        DAY_IN_NO_DATE = 1
        OTHERS = 2
    MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
    IF R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2).
      R_BUDAT-LOW = S_BUDAT-LOW.
      MODIFY R_BUDAT.
    ENDIF.
    IF R_BUDAT-HIGH4(2) = S_BUDAT-HIGH4(2).
      R_BUDAT-HIGH = S_BUDAT-HIGH.
      MODIFY R_BUDAT.
    ENDIF.
For Summary on 26.4.05.
    IF Y1 = 'X'.
      CLEAR R_BUDAT.
      REFRESH R_BUDAT.
      R_BUDAT-LOW = S_BUDAT-LOW.
      R_BUDAT-HIGH = S_BUDAT-HIGH.
      APPEND R_BUDAT.
      CLEAR R_BUDAT.
    ENDIF.
ENDLOOP.
At Selection Screen *
AT SELECTION-SCREEN OUTPUT.
Start of Selection *
START-OF-SELECTION.
V_MJAHR = P_SPMON+0(4).
Get plant distinction warehouse/production
PERFORM GET_PLANT_DISTINCTION.
Collect the data from various tables
PERFORM GETDATA_FG_STOCK.
here the number of rows in the output table is found
PERFORM OUTPUT_TABLE_CHECK.
here the top of the page code is written, that is to be displayed
in the output
PERFORM Z_TOP_OF_PAGE.
here ALV layout properties are set
PERFORM Z_LAYOUT_SETTINGS.
ALV EVENTS for TOP OF PAGE and for USER COMMAND
PERFORM Z_ALV_EVENTS.
The field catalog is defined for the Primary List is defined in
the subroutine CREATE_FIELD_CATALOG include program ZPRRDOCR_FCAT
PERFORM Z_CREATE_FIELD_CATALOG.
This is for displaying the output
PERFORM Z_REUSE_ALV_GRID_DISPLAY.
*& Form getdata_fg_stock
Getting data from standard tables
FORM GETDATA_FG_STOCK.
For getting the Start date & end date of the month
PERFORM get_month_dates.
Getting the Opening Stock from MARDH table
IF MON EQ '01'.
    MON1 = MON.
    FYEAR1 = FYEAR.
    MON = '12'.
    FYEAR = FYEAR - 1.
ELSE.
    MON1 = MON.
    FYEAR1 = FYEAR.
    MON = MON - 1.
    FYEAR = FYEAR.
ENDIF.
PERFORM GET_RECORDS_FROM_DB.
*added for Month Summary on 26.4.05.
LOOP AT R_BUDAT.
    S_BUDAT-LOW = R_BUDAT-LOW.
    S_BUDAT-HIGH = R_BUDAT-HIGH.
*for Month
    P_SPMON0(4) = S_BUDAT-LOW0(4).
    P_SPMON4(2) = S_BUDAT-LOW4(2).
*for summary.
    IF Y1 = 'X'.
      LOOP AT S_BUDAT.
        S_BUDAT1-SIGN = 'I'.
        S_BUDAT1-OPTION = 'NB'.
        S_BUDAT1-LOW = S_BUDAT-LOW.
        S_BUDAT1-HIGH = S_BUDAT-HIGH.
        APPEND S_BUDAT1.
        CLEAR S_BUDAT1.
      ENDLOOP.
    ENDIF.
    IMKPFT[] = I_MKPF[].
    IMKPFT2[] = I_MKPF[].
    IMARDT[] = I_MARD[].
    IMARDHT[] = I_MARDH[].
    PERFORM MONTH_WISE.
    PERFORM PROCESS_MOVEMENTS.
    PERFORM CALCULATE_OPENING_STOCK.
    PERFORM UPDATE_NON_TRANSACTION_ITMS.
    PERFORM DELETE_EMPTY_RECORDS.
    CLEAR: IMARDHT,IMARDT,IMKPFT1,IMKPFT,I_FINAL,I_FINAL5.
    REFRESH: IMARDHT,IMARDT,IMKPFT1,I_FINAL,I_FINAL5,IMKPFT.
ENDLOOP.
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*end of changes for month.
ENDFORM. " getdata_fg_stock
FORM MONAT_F4 *
F4-Hilfe für Monat *
FORM MONAT_F4.
DATA: BEGIN OF MF_DYNPFIELDS OCCURS 1.
          INCLUDE STRUCTURE DYNPREAD.
DATA: END OF MF_DYNPFIELDS.
DATA: MF_RETURNCODE LIKE SY-SUBRC,
         MF_MONAT LIKE ISELLIST-MONTH,
         MF_HLP_REPID LIKE SY-REPID.
FIELD-SYMBOLS: .
Wert von Dynpro lesen
GET CURSOR FIELD MF_DYNPFIELDS-FIELDNAME.
APPEND MF_DYNPFIELDS.
MF_HLP_REPID = SY-REPID.
DO 2 TIMES.
    CALL FUNCTION 'DYNP_VALUES_READ'
      EXPORTING
        DYNAME               = MF_HLP_REPID
        DYNUMB               = SY-DYNNR
      TABLES
        DYNPFIELDS           = MF_DYNPFIELDS
      EXCEPTIONS
        INVALID_ABAPWORKAREA = 01
        INVALID_DYNPROFIELD = 02
        INVALID_DYNPRONAME   = 03
        INVALID_DYNPRONUMMER = 04
        INVALID_REQUEST      = 05
        NO_FIELDDESCRIPTION = 06
        UNDEFIND_ERROR       = 07.
    IF SY-SUBRC = 3.
Aktuelles Dynpro ist Wertemengenbild
      MF_HLP_REPID = 'SAPLALDB'.
    ELSE.
      READ TABLE MF_DYNPFIELDS INDEX 1.
Unterstriche durch Blanks ersetzen
      TRANSLATE MF_DYNPFIELDS-FIELDVALUE USING '_ '.
      EXIT.
    ENDIF.
ENDDO.
IF SY-SUBRC = 0.
Konvertierung ins interne Format
    CALL FUNCTION 'CONVERSION_EXIT_PERI_INPUT'
      EXPORTING
        INPUT         = MF_DYNPFIELDS-FIELDVALUE
      IMPORTING
        OUTPUT        = MF_MONAT
      EXCEPTIONS
        ERROR_MESSAGE = 1.
    IF MF_MONAT IS INITIAL.
Monat ist initial => Vorschlagswert aus akt. Datum ableiten
      MF_MONAT = SY-DATLO(6).
    ENDIF.
    CALL FUNCTION 'POPUP_TO_SELECT_MONTH'
      EXPORTING
        ACTUAL_MONTH               = MF_MONAT
      IMPORTING
        SELECTED_MONTH             = MF_MONAT
        RETURN_CODE                = MF_RETURNCODE
      EXCEPTIONS
        FACTORY_CALENDAR_NOT_FOUND = 01
        HOLIDAY_CALENDAR_NOT_FOUND = 02
        MONTH_NOT_FOUND            = 03.
    IF SY-SUBRC = 0 AND MF_RETURNCODE = 0.
ASSIGN (MF_DYNPFIELDS-FIELDNAME) TO <MF_FELD>. " ==>> note 148804
<MF_FELD> = MF_MONAT.
      CALL FUNCTION 'CONVERSION_EXIT_PERI_OUTPUT'
        EXPORTING
          INPUT = MF_MONAT
        IMPORTING
          OUTPUT = MF_DYNPFIELDS-FIELDVALUE.
      COLLECT MF_DYNPFIELDS.
      CALL FUNCTION 'DYNP_VALUES_UPDATE'
        EXPORTING
          DYNAME               = MF_HLP_REPID
          DYNUMB               = SY-DYNNR
        TABLES
          DYNPFIELDS           = MF_DYNPFIELDS
        EXCEPTIONS
          INVALID_ABAPWORKAREA = 01
          INVALID_DYNPROFIELD = 02
          INVALID_DYNPRONAME   = 03
          INVALID_DYNPRONUMMER = 04
          INVALID_REQUEST      = 05
          NO_FIELDDESCRIPTION = 06
          UNDEFIND_ERROR       = 07. "<<== note 148804
    ENDIF.
ENDIF.
ENDFORM.                                                    "MONAT_F4
*& Form get_month_dates
Calculating the Month Start & End Date
FORM GET_MONTH_DATES.
IF M1 = 'X'.
    FYEAR = P_SPMON+0(4).
    MON = P_SPMON+4(2).
    CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
    R_BUDAT-SIGN = 'I'.
    R_BUDAT-OPTION = 'BT'.
    CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
      EXPORTING
        I_DATE = R_BUDAT-LOW
      IMPORTING
        E_DATE = R_BUDAT-HIGH.
    APPEND R_BUDAT.
    CLEAR S_BUDAT.
    REFRESH S_BUDAT.
    S_BUDAT-SIGN = 'I'.
    S_BUDAT-OPTION = 'BT'.
    S_BUDAT-LOW = R_BUDAT-LOW.
    S_BUDAT-HIGH = R_BUDAT-HIGH.
    APPEND S_BUDAT.
ELSE.
    FYEAR = P_SPMON+0(4).
    MON = P_SPMON+4(2).
    CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
    R_BUDAT-SIGN = 'I'.
    R_BUDAT-OPTION = 'BT'.
    CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
      EXPORTING
        I_DATE = R_BUDAT-LOW
      IMPORTING
        E_DATE = R_BUDAT-HIGH.
    APPEND R_BUDAT.
ENDIF.
ENDFORM. " get_month_dates
*& Form output_table_Check
checking for records for output
FORM OUTPUT_TABLE_CHECK .
DESCRIBE TABLE I_FINALT LINES INDEX.
IF INDEX EQ 0.
    MESSAGE I041 WITH TEXT-005.
    LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM. "OUTPUT_TABLE_CHECK
*& Form Z_TOP_OF_PAGE
for setting the details in the top of page *
has no formal paramters *
FORM Z_TOP_OF_PAGE.
DATA: V_MON(2),
V_YR(40),
V_FIN(18),
V_FIN1(48),
LOW(10),
HIGH(10).
V_MON = P_SPMON+4(2).
V_YR = P_SPMON+0(4).
FHEADER-TYP = 'H'.
FHEADER-INFO = 'Stock Register Report (FG Stock)'.
APPEND FHEADER.
CLEAR FHEADER.
*if m1 = 'X'.
CONCATENATE 'Month = ' v_mon '.' v_yr INTO v_fin.
fheader-typ = 'H'.
fheader-info = v_fin.
APPEND fheader.
CLEAR fheader.
*endif."prabhu on 18.5.5
IF D1 = 'X'.
    CLEAR S_BUDAT.
    LOOP AT S_BUDAT.
      CONCATENATE S_BUDAT-LOW6(2) '/' S_BUDAT-LOW4(2) '/'
      S_BUDAT-LOW+0(4) INTO LOW.
      CONCATENATE S_BUDAT-HIGH6(2) '/' S_BUDAT-HIGH4(2) '/'
      S_BUDAT-HIGH+0(4) INTO HIGH.
      CONCATENATE 'Date = ' LOW ' - ' HIGH INTO V_FIN1.
      FHEADER-TYP = 'H'.
      FHEADER-INFO = V_FIN1.
      APPEND FHEADER.
      CLEAR FHEADER.
    ENDLOOP.
ENDIF.
ENDFORM. " Z_TOP_OF_PAGE
*& Form Z_LAYOUT_SETTINGS
this is done for setting the properties for the layout of the *
grid *
has no formal paramters *
FORM Z_LAYOUT_SETTINGS.
FS_LAYO-ZEBRA = 'X'. " Output in Zebra pattern
FS_LAYO-DETAIL_POPUP = 'X'. " A popup window appears to give
FS_LAYO-DETAIL_TITLEBAR = TEXT-022.
FS_LAYO-COLWIDTH_OPTIMIZE = 'X'.
ENDFORM. " Z_LAYOUT_SETTINGS
*& Form Z_ALV_EVENTS
This is used for handling the events TOP OF PAGE and the USER *
COMMAND event *
has no formal paramters *
FORM Z_ALV_EVENTS.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      I_LIST_TYPE = 0
    IMPORTING
      ET_EVENTS   = FEVENTS[].
READ TABLE FEVENTS WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC = 0.
    FEVENTS-FORM = 'Z_TOPOFPAGE'.
    MODIFY FEVENTS INDEX SY-TABIX.
    CLEAR FEVENTS.
ENDIF.
READ TABLE FEVENTS WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC = 0.
    FEVENTS-FORM = 'Z_USER_COMMAND'.
    MODIFY FEVENTS INDEX SY-TABIX.
    CLEAR FEVENTS.
ENDIF.
ENDFORM. "Z_ALV_EVENTS
*& Form Z_CREATE_FIELD_CATALOG
here the field catalog is created for the primary list *
no formal parameters *
FORM Z_CREATE_FIELD_CATALOG.
for the Plant
FCAT-FIELDNAME = 'WERKS'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000005'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Plant'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Type
FCAT-FIELDNAME = 'MTART'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000006'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MatTyp'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material No.
FCAT-FIELDNAME = 'MATNR'.
FCAT-KEY = 'X'.
fcat-hotspot = 'X'.
FCAT-OUTPUTLEN = '000018'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Material'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Description
FCAT-FIELDNAME = 'MAKTX'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '000040'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Description'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Unit of Measure
FCAT-FIELDNAME = 'MEINS'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '03'.
FCAT-JUST = 'C'.
FCAT-SELTEXT_M = 'UOM'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'UNIT'.
APPEND FCAT.
CLEAR FCAT.
for the Plant
FCAT-FIELDNAME = 'MONTH'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '08'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MONTH'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Opening Stock
FCAT-FIELDNAME = 'C_STK'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Opening Stock'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
fcat-do_sum = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Total Receipts
FCAT-FIELDNAME = 'TRECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Receipts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Production
FCAT-FIELDNAME = 'PRODU'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Production'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Other Plant Receipts
FCAT-FIELDNAME = 'RECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Othr Plnt Recpts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Sales Return
FCAT-FIELDNAME = 'SAL_RET'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Sales Return'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Total Dispatches
FCAT-FIELDNAME = 'TDISP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Dispatches'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND

INVENTORY REPORT for customer but not consignment company owned

HI Everyone,
I am working on creating an inventory report and sending it out to a customer.
We have a customer who needs to see their inventory we are going to ship. we are making materials for them on an MTS scenario based on a forecast... So the customer before placing a PO should be able to look at the inventory levels we make for them. on a daily basis.... No what I am trying to is execute a program that sends out an inventory report (the programs I am using are( RSMIPROACT and ROEMPROACT)... I try to fill in the fields and save as a variant and we run it as a background job every morning and we send out an idoc to the customer...
The above process is a scenario that still needs to be worked on...
THe customer should be able to look at only his stock and not any other stock....
Now can we use a display of listing/exclusion function to send out the material stock report.... we need to send the total inv as well as the mat numbers... can we acheive it with the listing/exclusion funtion..
Or is there a program that pulls all the data from the tables which store the customer material info record where we maintain all the materials for a customer...
If there i a better way through which this can eb done please suggest me... thank you..
Once again the above stock is not consignent stock... we are manufacturinng based on the forecasts and we need the customer t be able to look at the stock on a daily basis.... Please help...

There is no report / funtionality is SAP to acheive this. Custom program is the only solution. Your logic looks ok, where there is a CMIR maintained, you may pick the total stock from table MARD put into a format/layout and transfer via idoc to the customer.
Thanks & regards
AHP.

Inventory Report For Special Stock (Project Stock)

Dear Sir,
We are in Make -To - Order scenario and procure the material against the WBS element . For getting the Inventory List , we use MBBS tcode but it has following limitation :
a) It give the Stock Status as on date basis . While we need Stock Inventory on a cut off date , say on
31/Jan/2007 .
b) We are not able to get the Inventory Report , Material Group wise
I request to kindly guide me , as how to take the Inventory Report for Project Stock .
Regards
B Mittal

Hi Shailesh,
Is there any way we can include some extra fields into this MC.9 report - i tried but could not find anything. Can you please help.
Regards,
Laxmi

Inventory report for Previous Periods

Hi Experts ,
I would like to have an inventory report for all materials in a Particular Plant for the Periods Sep 2009 and Sep 2010 . Could you please help me in providing the reports for the same .
Thanks
Moderator message: Basic frequently asked question - Please search forum for answers and read the docu in help.sap.com
See as well our rules of engagement: http://scn.sap.com/docs/DOC-18590
A good way to search the forum is with google. See this blog with details for a good search
http://scn.sap.com/community/support/blog/2012/04/16/getting-the-most-out-of-google-optimizing-your-search-queries
This blog describes how to use the SCN search: http://scn.sap.com/community/about/blog/2012/12/04/how-to-use-scn-search
The discussions are not a replacement for proper training
Thread locked
Message was edited by: Jürgen L

You can well run these reports on background..
Go to SE38 Enter the program name "J_1HSTCD"
Then press Execute / F8.
Enter you selection date as 01.09.2009 to 31.09.2010 and enter the plant and leave the all selection as per SAP standard..
Then press F9 or Go to Program

Inventory report for the selection of requisitioner and MRP controller

Hello Experts,
Can someone please help me with a standard Inventory report in which we can give input thr requistioner and MRP controller
regards,
YK

Hi,
You will get the requisition no. from EKKO (provided PO has been created otherwise you won't get any record). Find out PO & item no. for the requisition item. Then you can check EKBE table whether GR has been posted or not. If GR has not been posted then there won't be entry in EKBE for that PO & item.
Regards,
Rakesh

Inventory Report-Replacement path for Base UOM to Case and Standrad Cost

Hi, We have a Scenario as below:
Question1:
We have a multiprovider contains 4 infocubes and 2 Master Data objects
a.Demand
b.Inventory
c.Sales Orders
d.In Transit
Master Data objects
a. Material (contains Base UOM to Case as Key Figure Attribute and also Base UOM as an attribute)
b. Material Location (Contains material as an attribute and also Standard Cost as a Key Figure attribute)
At the report level two formula variables are defined with replacement path for showing the Base UOM to Case and Standard Cost in columns.
We have 4 reports on this multiprovider. There is a dialy sales report which gives the following details
Material, Location, MRP Controller, CalDay, Base UOM, Actual Sales(AS), Dependent Demand(DD), Consumption Qyt(CQ), Base to Case UOM, Standard Cost
In this report for all the records the Base to UOM and Standard Cost column is coming with values which is nothing but the replacement path on the material master key figure attribute. Though this report is on the multiprovider all the major keyfigures (AS, DD and CQ) are coming from a single cube( this is an observation from myside).
We have another report which is the Inventory Report with the following details:
Material, Location, MRP Controllder, Calday, Base UOM, Unrestricted Inventory(UI), committed Inventory(CI), Back Order Qty(BOQ), In Transit by Sh/Rec(ITS), In Transit Pipeline(ITP), On Order Qty (OOQ), Current Inventory Position (CIP), Quality Inspection Stock(QIS), Block Stock(BS), Base to Case UOM, Standard Cost
Now in this report for all the records the Base to Case UOM and standrad cost is not showing up. Is there anything which needs to be done in order to get the Base to Case UOM and standard cost for all the records.
Question2:
When Non-Cumulative and Cumulative key figures are combined at the multi provider and also at the report level, will there be any problem?
Regards
Vijay

Hi,
I think you can proceed with virtual characteristics for this.In the code you can truncate the time and you can display on the date:
Regards
Prasad

Inventory report for stock category B

Hi everyone,
We are trying to generate a customer stock inventory report with stock category B. The table MARD is not displaying any values annwe also looked at table MKOL. Its not giving us any. How do i get the inventory report for this stock type B. Kindly Advise.

it is customer owned stock. We receiver materials from customer for repair and we recondition them and we give it back. for this we maintain it in stock type B. it is specifically used in aerospace industries. We want to make an inventory report for this customer owned stock in our inventory . i am unable to get the table. Kindly advise

Inventory report with the last transaction details of each material

Hi,
is there any standard inventory report in SAP which gives us the last transaction details of each
Material,along with last procurement qty, value, date and last issue
details of Qty, Value & date.
Thansk in advance.

Hi
try following t-code
MB5B u2013 Stock on Posting Date
or
2 s_p00_07000139 u2013 Stock Card and Inventory Material Report
Regards
Kailas Ugale

Blank awr report shown in oracle standars edition 11g (11.2.0.1.0)

Hi, friends ..
I am using Oracle 11g standars edition(11.2.0.1.0) on solaris 10 platform.I do have a very strange probleem..when iam trying to capture awr report i am getting a blank
awr report contain ing nothing...like below section
---------------------------------------------------------------------------->
WARNING: Since the DB Time is less than one second, there was minimal foreground activity in the snapshot period. Some of the percentage values will be invalid.
WORKLOAD REPOSITORY report for
DB Name DB Id Instance Inst num Startup Time Release RAC
DISDB 771054785 disdb 1 30-Dec-10 10:12 11.2.0.1.0 NO
Host Name Platform CPUs Cores Sockets Memory (GB)
dissemination-new Solaris Operating System (x86-64) .00
Snap Id Snap Time Sessions Cursors/Session
Begin Snap: 1 30-Dec-10 11:30:21
End Snap: 2 30-Dec-10 12:30:52
Elapsed: 60.51 (mins)
DB Time: 0.00 (mins)
Report Summary
Cache Sizes
Begin End
Buffer Cache: M M Std Block Size: K
Shared Pool Size: 0M 0M Log Buffer: K
Load Profile
Per Second Per Transaction Per Exec Per Call
DB Time(s): 0.0 0.0 0.00 0.00
DB CPU(s): 0.0 0.0 0.00 0.00
Redo size:
Logical reads: 0.0 1.0
Block changes: 0.0 1.0
Physical reads: 0.0 1.0
Physical writes: 0.0 1.0
User calls: 0.0 1.0
Parses: 0.0 1.0
Hard parses:
W/A MB processed: 0.0 0.0
Logons:
Executes: 0.0 1.0
Rollbacks:
Transactions: 0.0
Instance Efficiency Percentages (Target 100%)
Buffer Nowait %: Redo NoWait %:
Buffer Hit %: In-memory Sort %:
Library Hit %: Soft Parse %:
Execute to Parse %: 0.00 Latch Hit %:
Parse CPU to Parse Elapsd %: % Non-Parse CPU:
Shared Pool Statisitics Not Available
Top 5 Timed Foreground Events
Event Waits Time(s) Avg wait (ms) % DB time Wait Class
DB CPU 0 100.00
Host CPU (CPUs: Cores: Sockets: )
Load Average Begin Load Average End %User %System %WIO %Idle
Instance CPU
%Total CPU %Busy CPU %DB time waiting for CPU (Resource Manager)
Memory Statistics
Begin End
Host Mem (MB):
SGA use (MB):
PGA use (MB):
% Host Mem used for SGA+PGA:
Main Report
Report Summary
Wait Events Statistics
SQL Statistics
Instance Activity Statistics
IO Stats
Buffer Pool Statistics
Advisory Statistics
Wait Statistics
Undo Statistics
Latch Statistics
Segment Statistics
Dictionary Cache Statistics
Library Cache Statistics
Memory Statistics
Streams Statistics
Resource Limit Statistics
Shared Server Statistics
init.ora Parameters
Back to Top
Wait Events Statistics
Time Model Statistics
Operating System Statistics
Operating System Statistics - Detail
Foreground Wait Class
Foreground Wait Events
Background Wait Events
Wait Event Histogram
Wait Event Histogram Detail (64 msec to 2 sec)
Wait Event Histogram Detail (4 sec to 2 min)
Wait Event Histogram Detail (4 min to 1 hr)
Service Statistics
Service Wait Class Stats
Back to Top
Time Model Statistics
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
Operating System Statistics
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
Operating System Statistics - Detail
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
Foreground Wait Class
s - second, ms - millisecond - 1000th of a second
ordered by wait time desc, waits desc
%Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Captured Time accounts for % of Total DB time .00 (s)
Total FG Wait Time: (s) DB CPU time: .00 (s)
Wait Class Waits %Time -outs Total Wait Time (s) Avg wait (ms) %DB time
DB CPU 0 100.00
Back to Wait Events Statistics
Back to Top
Foreground Wait Events
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
Background Wait Events
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
Wait Event Histogram
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
Wait Event Histogram Detail (64 msec to 2 sec)
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
Wait Event Histogram Detail (4 sec to 2 min)
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
Wait Event Histogram Detail (4 min to 1 hr)
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
Service Statistics
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
Service Wait Class Stats
No data exists for this section of the report.
Back to Wait Events Statistics
Back to Top
SQL Statistics
SQL ordered by Elapsed Time
SQL ordered by CPU Time
SQL ordered by User I/O Wait Time
SQL ordered by Gets
SQL ordered by Reads
SQL ordered by Physical Reads (UnOptimized)
SQL ordered by Executions
SQL ordered by Parse Calls
SQL ordered by Sharable Memory
SQL ordered by Version Count
Complete List of SQL Text
Back to Top
SQL ordered by Elapsed Time
No data exists for this section of the report.
Back to SQL Statistics
Back to Top
SQL ordered by CPU Time
No data exists for this section of the report.
Back to SQL Statistics
Back to Top
SQL ordered by User I/O Wait Time
No data exists for this section of the report.
Back to SQL Statistics
Back to Top
SQL ordered by Gets
No data exists for this section of the report.
Back to SQL Statistics
Back to Top
SQL ordered by Reads
No data exists for this section of the report.
Back to SQL Statistics
Back to Top
SQL ordered by Physical Reads (UnOptimized)
No data exists for this section of the report.
Back to SQL Statistics
Back to Top
SQL ordered by Executions
No data exists for this section of the report.
Back to SQL Statistics
Back to Top
SQL ordered by Parse Calls
No data exists for this section of the report.
Back to SQL Statistics
Back to Top
SQL ordered by Sharable Memory
No data exists for this section of the report.
Back to SQL Statistics
Back to Top
SQL ordered by Version Count
No data exists for this section of the report.
Back to SQL Statistics
Back to Top
Complete List of SQL Text
No data exists for this section of the report.
Back to SQL Statistics
Back to Top
Instance Activity Statistics
Instance Activity Stats
Instance Activity Stats - Absolute Values
Instance Activity Stats - Thread Activity
Back to Top
Instance Activity Stats
No data exists for this section of the report.
Back to Instance Activity Statistics
Back to Top
Instance Activity Stats - Absolute Values
No data exists for this section of the report.
Back to Instance Activity Statistics
Back to Top
Instance Activity Stats - Thread Activity
No data exists for this section of the report.
Back to Instance Activity Statistics
Back to Top
IO Stats
IOStat by Function summary
IOStat by Filetype summary
IOStat by Function/Filetype summary
Tablespace IO Stats
File IO Stats
Back to Top
IOStat by Function summary
No data exists for this section of the report.
Back to IO Stats
Back to Top
IOStat by Filetype summary
No data exists for this section of the report.
Back to IO Stats
Back to Top
IOStat by Function/Filetype summary
No data exists for this section of the report.
Back to IO Stats
Back to Top
Tablespace IO Stats
No data exists for this section of the report.
Back to IO Stats
Back to Top
File IO Stats
No data exists for this section of the report.
Back to IO Stats
Back to Top
Buffer Pool Statistics
Buffer Pool Statistics
Checkpoint Activity
Back to Top
Buffer Pool Statistics
No data exists for this section of the report.
Back to Buffer Pool Statistics
Back to Top
Checkpoint Activity
No data exists for this section of the report.
Back to Buffer Pool Statistics
Back to Top
Advisory Statistics
Instance Recovery Stats
MTTR Advisory
Buffer Pool Advisory
PGA Aggr Summary
PGA Aggr Target Stats
PGA Aggr Target Histogram
PGA Memory Advisory
Shared Pool Advisory
SGA Target Advisory
Streams Pool Advisory
Java Pool Advisory
Back to Top
Instance Recovery Stats
No data exists for this section of the report.
Back to Advisory Statistics
Back to Top
MTTR Advisory
No data exists for this section of the report.
Back to Advisory Statistics
Back to Top
Buffer Pool Advisory
No data exists for this section of the report.
Back to Advisory Statistics
Back to Top
PGA Aggr Summary
No data exists for this section of the report.
Back to Advisory Statistics
Back to Top
PGA Aggr Target Stats
No data exists for this section of the report.
Back to Advisory Statistics
Back to Top
PGA Aggr Target Histogram
No data exists for this section of the report.
Back to Advisory Statistics
Back to Top
PGA Memory Advisory
No data exists for this section of the report.
Back to Advisory Statistics
Back to Top
Shared Pool Advisory
No data exists for this section of the report.
Back to Advisory Statistics
Back to Top
SGA Target Advisory
No data exists for this section of the report.
Back to Advisory Statistics
Back to Top
Streams Pool Advisory
No data exists for this section of the report.
Back to Advisory Statistics
Back to Top
Java Pool Advisory
No data exists for this section of the report.
Back to Advisory Statistics
Back to Top
Wait Statistics
Buffer Wait Statistics
Enqueue Activity
Back to Top
Buffer Wait Statistics
No data exists for this section of the report.
Back to Wait Statistics
Back to Top
Enqueue Activity
No data exists for this section of the report.
Back to Wait Statistics
Back to Top
Undo Statistics
Undo Segment Summary
Undo Segment Stats
Back to Top
Undo Segment Summary
No data exists for this section of the report.
Back to Undo Statistics
Back to Top
Undo Segment Stats
No data exists for this section of the report.
Back to Undo Statistics
Back to Top
Latch Statistics
Latch Activity
Latch Sleep Breakdown
Latch Miss Sources
Mutex Sleep Summary
Parent Latch Statistics
Child Latch Statistics
Back to Top
Latch Activity
No data exists for this section of the report.
Back to Latch Statistics
Back to Top
Latch Sleep Breakdown
No data exists for this section of the report.
Back to Latch Statistics
Back to Top
Latch Miss Sources
No data exists for this section of the report.
Back to Latch Statistics
Back to Top
Mutex Sleep Summary
No data exists for this section of the report.
Back to Latch Statistics
Back to Top
Parent Latch Statistics
No data exists for this section of the report.
Back to Latch Statistics
Back to Top
Child Latch Statistics
No data exists for this section of the report.
Back to Latch Statistics
Back to Top
Segment Statistics
Segments by Logical Reads
Segments by Physical Reads
Segments by Physical Read Requests
Segments by UnOptimized Reads
Segments by Optimized Reads
Segments by Direct Physical Reads
Segments by Physical Writes
Segments by Physical Write Requests
Segments by Direct Physical Writes
Segments by Table Scans
Segments by DB Blocks Changes
Segments by Row Lock Waits
Segments by ITL Waits
Segments by Buffer Busy Waits
Back to Top
Segments by Logical Reads
Total Logical Reads: 1
Captured Segments account for 4.6E+06% of Total
Owner Tablespace Name Object Name Subobject Name Obj. Type Logical Reads %Total
SYS SYSTEM I_SYSAUTH1 INDEX 15,008 1500800.00
SYS SYSTEM I_OBJ2 INDEX 4,752 475200.00
SYS SYSTEM TAB$ TABLE 2,176 217600.00
SYS SYSTEM I_JOB_NEXT INDEX 1,856 185600.00
SYS SYSTEM SYS_C00646 INDEX 1,664 166400.00
Back to Segment Statistics
Back to Top
Segments by Physical Reads
Total Physical Reads: 1
Captured Segments account for 400.0% of Total
Owner Tablespace Name Object Name Subobject Name Obj. Type Physical Reads %Total
SYS SYSAUX WRH$_SYSMETRIC_SUMMARY_INDEX INDEX 3 300.00
SYS SYSTEM KOTAD$ TABLE 1 100.00
Back to Segment Statistics
Back to Top
Segments by Physical Read Requests
Total Physical Read Requests: 1
Captured Segments account for 400.0% of Total
Owner Tablespace Name Object Name Subobject Name Obj. Type Phys Read Requests %Total
SYS SYSAUX WRH$_SYSMETRIC_SUMMARY_INDEX INDEX 3 300.00
SYS SYSTEM KOTAD$ TABLE 1 100.00
Back to Segment Statistics
Back to Top
Segments by UnOptimized Reads
Total UnOptimized Read Requests: 1
Captured Segments account for 400.0% of Total
Owner Tablespace Name Object Name Subobject Name Obj. Type UnOptimized Reads %Total
SYS SYSAUX WRH$_SYSMETRIC_SUMMARY_INDEX INDEX 3 300.00
SYS SYSTEM KOTAD$ TABLE 1 100.00
Back to Segment Statistics
Back to Top
Segments by Optimized Reads
No data exists for this section of the report.
Back to Segment Statistics
Back to Top
Segments by Direct Physical Reads
No data exists for this section of the report.
Back to Segment Statistics
Back to Top
Segments by Physical Writes
Total Physical Writes: 1
Captured Segments account for 1.1E+04% of Total
Owner Tablespace Name Object Name Subobject Name Obj. Type Physical Writes %Total
SYSMAN SYSAUX MGMT_METRICS_RAW_PK INDEX 27 2700.00
SYS SYSAUX WRH$_SYSMETRIC_HISTORY TABLE 16 1600.00
SYS SYSAUX WRH$_SYSMETRIC_HISTORY_INDEX INDEX 16 1600.00
SYSMAN SYSAUX MGMT_SYSTEM_PERF_LOG_IDX_01 INDEX 9 900.00
SYS SYSAUX SMON_SCN_TIME TABLE 9 900.00
Back to Segment Statistics
Back to Top
Segments by Physical Write Requests
Total Physical Write Requestss: 1
Captured Segments account for 5.1E+03% of Total
Owner Tablespace Name Object Name Subobject Name Obj. Type Phys Write Requests %Total
SYSMAN SYSAUX MGMT_METRICS_RAW_PK INDEX 11 1100.00
SYS SYSAUX SMON_SCN_TIME TABLE 9 900.00
SYSMAN SYSAUX MGMT_SYSTEM_PERF_LOG_IDX_01 INDEX 6 600.00
SYSMAN SYSAUX MGMT_CURRENT_METRICS_PK INDEX 4 400.00
SYS SYSTEM I_JOB_NEXT INDEX 2 200.00
Back to Segment Statistics
Back to Top
Segments by Direct Physical Writes
No data exists for this section of the report.
Back to Segment Statistics
Back to Top
Segments by Table Scans
Total Table Scans: 1
Captured Segments account for 900.0% of Total
Owner Tablespace Name Object Name Subobject Name Obj. Type Table Scans %Total
SYS SYSTEM I_OBJ2 INDEX 9 900.00
Back to Segment Statistics
Back to Top
Segments by DB Blocks Changes
% of Capture shows % of DB Block Changes for each top segment compared
with total DB Block Changes for all segments captured by the Snapshot
Owner Tablespace Name Object Name Subobject Name Obj. Type DB Block Changes % of Capture
SYS SYSTEM I_JOB_NEXT INDEX 896 58.95
SYSMAN SYSAUX MGMT_METRICS_RAW_PK INDEX 160 10.53
SYSMAN SYSAUX MGMT_CURRENT_METRICS_PK INDEX 112 7.37
SYS SYSAUX SMON_SCN_TIME TABLE 80 5.26
SYSMAN SYSAUX MGMT_SYSTEM_PERF_LOG_IDX_01 INDEX 64 4.21
Back to Segment Statistics
Back to Top
Segments by Row Lock Waits
No data exists for this section of the report.
Back to Segment Statistics
Back to Top
Segments by ITL Waits
No data exists for this section of the report.
Back to Segment Statistics
Back to Top
Segments by Buffer Busy Waits
No data exists for this section of the report.
Back to Segment Statistics
Back to Top
Dictionary Cache Stats
No data exists for this section of the report.
Back to Top
Library Cache Activity
No data exists for this section of the report.
Back to Top
Memory Statistics
Memory Dynamic Components
Memory Resize Operations Summary
Memory Resize Ops
Process Memory Summary
SGA Memory Summary
SGA breakdown difference
Back to Top
Memory Dynamic Components
No data exists for this section of the report.
Back to Memory Statistics
Back to Top
Memory Resize Operations Summary
No data exists for this section of the report.
Back to Memory Statistics
Back to Top
Memory Resize Ops
No data exists for this section of the report.
Back to Memory Statistics
Back to Top
Process Memory Summary
No data exists for this section of the report.
Back to Memory Statistics
Back to Top
Back to Memory Statistics
Back to Top
SGA breakdown difference
No data exists for this section of the report.
Back to Memory Statistics
Back to Top
Streams Statistics
Streams CPU/IO Usage
Streams Capture
Streams Capture Rate
Streams Apply
Streams Apply Rate
Buffered Queues
Buffered Queue Subscribers
Rule Set
Persistent Queues
Persistent Queues Rate
Persistent Queue Subscribers
Back to Top
Streams CPU/IO Usage
No data exists for this section of the report.
Back to Streams Statistics
Back to Top
Streams Capture
No data exists for this section of the report.
Back to Streams Statistics
Back to Top
Streams Capture Rate
No data exists for this section of the report.
Back to Streams Statistics
Back to Top
Streams Apply
No data exists for this section of the report.
Back to Streams Statistics
Back to Top
Streams Apply Rate
No data exists for this section of the report.
Back to Streams Statistics
Back to Top
Buffered Queues
No data exists for this section of the report.
Back to Streams Statistics
Back to Top
Buffered Queue Subscribers
No data exists for this section of the report.
Back to Streams Statistics
Back to Top
Rule Set
No data exists for this section of the report.
Back to Streams Statistics
Back to Top
Persistent Queues
No data exists for this section of the report.
Back to Streams Statistics
Back to Top
Persistent Queues Rate
No data exists for this section of the report.
Back to Streams Statistics
Back to Top
Persistent Queue Subscribers
No data exists for this section of the report.
Back to Streams Statistics
Back to Top
Resource Limit Stats
No data exists for this section of the report.
Back to Top
Shared Server Statistics
Shared Servers Activity
Shared Servers Rates
Shared Servers Utilization
Shared Servers Common Queue
Shared Servers Dispatchers
Back to Top
Shared Servers Activity
No data exists for this section of the report.
Back to Shared Server Statistics
Back to Top
Shared Servers Rates
No data exists for this section of the report.
Back to Shared Server Statistics
Back to Top
Shared Servers Utilization
No data exists for this section of the report.
Back to Shared Server Statistics
Back to Top
Shared Servers Common Queue
No data exists for this section of the report.
Back to Shared Server Statistics
Back to Top
Shared Servers Dispatchers
No data exists for this section of the report.
Back to Shared Server Statistics
Back to Top
init.ora Parameters
No data exists for this section of the report.
Back to Top
Dynamic Remastering Stats
No data exists for this section of the report.
Back to Top
End of Report
---------------------------------------------->>
here intresting is that i also can't have the memory section view also.i trien to clear awr repositary and recreate it..bounce database,also tried taking different snap value.But does notmake any change.can u tell me why tha happening..and how can i get a good awr report.

Hi there,
I have covered this in my blog entry on the subject. Check that link out for more licensing information and other resources.
The problem you are experiencing is caused by the fact that AWR is part of the DIAGNOSTIC and TUNING packs of Oracle 11g, which as of 11g is no longer a standard feature of the database but rather an optional extra which must be licensed in addition to your default Oracle Standard Edition package. In terms of the licensing, you just need to license it as an optional extra so that you will actually be using it legally, and then you can go ahead and enable it.
While it may be an additional licensed item, it is actually installed on your DB by default, but is just not enabled. So, once you have cleared the licensing issue, you will be free to enable diagnostics by setting the new database parameter, CONTROL_MANAGEMENT_PACK_ACCESS. You can do this by running the following as a dba:
<pre>alter system set control_management_pack_access="DIAGNOSTIC+TUNING" scope=both;</pre>
After running this command, your database will start accumulating diagnostic information. Note that you will need to wait until new snapshots are created in which the new diagnostic information will be available. I found that although most of the information became available after setting CONTROL_MANAGEMENT_PACK_ACCESS, it was only once the database was restarted that all of the information became available. I have seen many people reporting similar behavior.
Old snapshots will obviously continue to give the errors because they did not have the diagnostic information available at the time.

Urgent: regarding physical inventory report display

hi,
i had made a report in which i have to display the physical inventory report details in which details about the material is to be given.
I want to check the details which are present in the tcode MI07 . Can anybody tell me any tcode in which i can see the details of mi07 tcode(including the reason of it).

Greetings,
It might shed some light to read about the display in your portable computer: http://en.wikipedia.org/wiki/LCD
LCDs are primarily plastic panels with various layers inside. Pressure applied to those panels can cause them to crack, leaking the liquid crystal components about. Pressure could be heavy books in a bag pushing against the screen, heavy cat sitting on a closed lid, dog, other animal, someone slamming the lid, child running through the room, etc. This applies to any LCD whether it be in a computer or in a Television (don't press too hard on your TV screen!!).
Displays don't exhibit the type of damage you indicate by themselves. A single pixel might go dead in an LCD but zig zag lines indicates cracking of the layers inside the panels themselves. Something from the outside world made an impact on the display resulting in the damage you see. You may not have been the one pressing hard on it and you may not have seen it happen, but something happened.
The 1 year limited warranty and AppleCare protection plan offer coverage for component failures, not damage.
Coverage for damage would be provided by something along the lines of insurances (home owners, renters, etc.) If you purchased this computer with a Credit Card you may wish to contact your Credit Card company. Many cards have included insurance for purchases you make so even if an item is damage during your use of it, they will cover it.
Best of luck.

Program to check inventory report

Hi guys,
I need to send inventory report as idoc to customer on daily basis, bt they need customized fields located in SAP .. so i need is to extend the idoc.. insert the required segments and modify the user exit .. to pop the required fields in idoc.. untill here everything is fine..
Now my question is.. how should i configure to trigger the idoc to be sent daily... and to define output type as idoc...
Normally, if its standard application .....we will configure in NACE and schedule the program rseout00 .. bt in this case .. what should i do??

Hi,
Go to program RSVTPROT in se38 transaction. There enter customzing object table as V_T001B and T001B. Thern enter the date range you want to evaluate,also customizng object or tables, select all output options BUT not archived logs and execute.
You will get the ALV report with user name,date and changes done
cya
udayakumar

Inventory Report Based On Posting Date

Hai All
Can any one help me with the subject "Inventory Report Based On Posting Date"
Please
with regards
Shankar

hi,
Visit this link,already answered.
Difference between posting & system date in Inventory Audit Report
Jeyakanthan

BO XI R2 - "Blank "Crystal Reports Viewer" window - attempt to print report

My company recently set up a Business Object Enterprise XI Release 2 server. On the server are a number of crystal reports that are run interactively by users, through the user console. The expectation is that the user will log on to the BI server, click on the report title, enter the parameters, see a preview of the report in the Crystal Report Viewer, then click the print icon on the Crystal Report Viewer toolbar.
Our corporate standard is current Windows XP SP3, with Internet Explorer 8; By default, users are set up to use the DHTML report viewer. The reports were developed with the Crystal Reports XI R2 report designer, and connect to an Oracle 10g database through Oracle client.
When users attempt to view, then print the reports, the user is able to select the report, enter the parameters, view the report data, and even page through the report preview with no issues. However, when the user attempts to print the report by clicking the print icon on the Crystal Reports Viewer toolbar, a blank "Crystal Reports Viewer" window pops up and remains indefinitely.
The really puzzling thing about this issue is that for about 1/3 of our users, printing will work - a print dialog will appear, allowing the user to select a printer, and when the user clicks OK, the report will print. For the other 2/3 of our users, the blank "Crystal Reports Viewer" window pops up.
I have added the BO XI R2 server's address to trusted sites, adopted the lowest security settings for trusted sites, and enabled all activity I could think of in IE security settings (ActiveX controls-related). I also ran the web site in compatibilitiy mode.
Has anyone on this forum experienced this issue, and does anyone here know how to resolve it?
Thank you,
Bob Gardner

I suspect that this behavior occurs because the client computer is unable to download ActiveX controls.
The report viewer requires the PrintControl.dll to print reports from the client computer. The PrintControl.dll downloads automatically if it has not been previously downloaded on to the client computer, provided that the user that is currently logged on is able to download ActiveX controls.
To enable the download of ActiveX controls on the client computer, perform the following steps:
1) Open your Internet Explorer.
2) From the Tools menu, select Internet Options.
3) In the Security tab, select the web content zone that corresponds to your web application.
4) Click Custom Level.
5) In the Security Settings dialog box, scroll down to find the ActiveX controls and plug-ins section.
6) Select Enable or Prompt for the Download signed ActiveX controls item.
7) The print dialog box will now appear successfully when clicking the print button in the report viewer.
If the above does not help, try to troubleshoot this as follows:
1) click the print button (this will cause a postback to the web page) and then cancel the print dialog. right-click in the web page and select "View Source".
2) Search for the word "printcontrol.cab". This will show you where the application is trying to download the printcontrol from.
Paste the URL into a browser.
3) If you get prompted to "open or save to disk" the url is correct and there is a browser setting or possibly even a system policy preventing the download.
4) If you get a "404 page not found" or a similar error message, investigate the URL.
5) If the issue is on your local web server, see if it is possible to browse to the URL in IIS manager.
- Ludek

-ve values in inventory report

Hi Experts,
I have inventory report, this report shows total stock, in this report some materials are showing '-ve' values,but in cube total issue stock and total received stock both are same, that means this inventory report should show '0' value.
for example: in cube total issues stock: 13.60, total received stock: 13.60. That means total stock is = 0 (13.60-13.60), but in report it is showing -13.60.
I am not understanding what is the problem,
Pl help to do this,
good answer will be appriciated.
thanks in advance,
Venkat

Hi Venkat,
The calculation's of Inventory total stock is not as simple as we understand them. To calculate total stock it consider different Movement type's, reversal entries, blocked stock etc. as well into consideration.
There is no -ve stock and there can be no as well, but still u r getting that (i also got that ) then this is how u can analyze at various points where exactly the problem is.
1. Try to run some standard report for total stock (based on inventory Cube 0IC_C03 i guess this is u usign probably). Check the stock value for 1 or two particular Material and cross check the stock of same material in your R/3 system through some tr MMBE.
2. If standard report gives u rite result then probably some logic problem in ur report.
3. Apart from that the main problem of this situation is data loading issue.
Please follow proper inventory data loading steps. If not done step by step u will end up with wrong data.
Hope these steps will help you out in tracking the situation.
Thanks
Dipika Tyagi

Blank inventory reports

Similar Messages

Maybe you are looking for