Blank Records showing at Infoprovider level..how to eliminate@ Report level

Hello Experts,
I am facing an issue. For a particular matierial in the Bex Report 2 KF values must be equl.
this is the complete scenario:
Matirial Total Target Actual Val BIO Actual Val
81271071 9550,52 4,793,67
In the above scenario Total Target Actual Val must be equl to Bio Actual Val.
I checked all the restrictions on the KF. 2 KFs are restricted by the same KF (Condition Base Value I ) .
Other than that for KF Total Target Actual Val restrictions are on Condition Type, Matierial Group 3. And for the KF BIO Actual Val restrictions are Red Group For Rebate.
I checked the data @ Infoprovider level for both the Good and Bad Test Cases. And found that for the Bad Test Case, if i give the input for Red Group for Rebate charactoristic there is no blank records are showing and where as if i will not give the input for Red Group for Rebate there are some blank records are showing up and adding those blank records.
Where as for the Good Test Case even if i provided the input for Red Group for Rebate or not, there is no blank records are showing up and in the report both the KFs are showing the equal values itself..
user requirement is at the report level both the KFs must be equal.
Here in the above up to now what i have done,  i have provided the information.
requesting all, kindly give me the reply how can i solve this issue. Expecting more and more bright suggestions .
Thanks,
SN.

Just a quick question. Have you restricted your KFs unnecessarily? Are the semantic keys valid if debited? Like, sometimes the clearing doc #s are no entered for a open po# and necessary for a closed one. In such case, have you checked if the semantic key is correctly defined? Cubes must help you aggregate data & reflect them within one line item as in your case.

Similar Messages

  • Blank Record Appearing in Power Pivot, How do I ensure that my Power Query script is filtering out all the Blank Records

    Hi,
    I noticed once of my Fact tables in my Power Pivot model contains a blank record. I can't understand why.
    So I added a Filter expression to the underlying Power Query query, something like; -
    Text.Length("MyField") > 0
    However after refreshing the Power Query query which contains the above expression the blank record still appears within my Power Pivot table.
    Kind Regards,
    Kieran.
    Kieran Patrick Wood http://www.innovativebusinessintelligence.com http://uk.linkedin.com/in/kieranpatrickwood http://kieranwood.wordpress.com/

    hi..
    As my understand, the blank record in Power Query will be return null value . So that, You try to use Text.Length("MyField" ) <> null.
    Regards,

  • How to reference Report level program unit in report query?

    I have created a report level function FREF13 which returns a VARCHAR2 variable. I am trying to reference this function in report SQL statement like:
    select * from wtr where file_ref = FREF13(:fref)
    I am getting error 'ORA-00904: Invalid column name' error. This is because it is unable to recognize FREF13 as local function.
    Is it possible to reference local program units in report query?
    Rgds,
    Manish

    No, it's not possible. The only things you can reference in a SQL query are columns and functions accessable in the database (since this is where the query is executed). You should create the function in the database.
    Regards,
    Danny

  • How to I get recorded shows back from my activity

    Some of my recorded shows have been deleted, how I do not know, but they show in my activity. Is there any way to get them back to my recorded list?

    Qnmargo wrote:
    Some of my recorded shows have been deleted, how I do not know, but they show in my activity. Is there any way to get them back to my recorded list?
    Deleted  items that can be recovered are on the Recent Deletes area, not the recent activity list.  

  • Display Report Level Filter value and Input Controls Value

    Hi,
    Please let me know how to display Report Level Filter value and Input COntrol values in the report.
    I have 2 tabs in the WebI Report. The first tab has the summary details about the other tabs like reprot desc, prompt values, reprot filter values,etc.
    In the 2nd tab I have the actual report which has input controls defined, prompt values and global level report filters.
    Can anyone please tell me how to display the Report level filter values and the Input Control values in the first tab report.
    For ex: Tab 2 has a Report level filter: Region = NA
    I need to display in Tab 1 in as Region: NA
    I used the function ReportFilterSummary but that is giving me other details, I want only the object name and the value.
    Also how to dispaly the Input Control values in the tab 1.
    Please let me know if you have any suggestions for this issue.
    Thanks

    did you try
    =ReportFilter([Year])
    if you are making report filter over the year, it will return the value of the filter
    by the way, the filter should be applied over all the report not to a specific block to be able to get the correct value
    the Input control also considered as report filter, only if you're applying them on the level of the report, if you applying an input contron over a specific block or chart, you will not get the values for ReportFilter
    good luck

  • Problem in showing blank records in tableview.

    Hi All,
    The requirement is to show a tableview which is completely(contains no data in any cell) blank. The user enters data as free text.
    I managed to create an internal table with blank records and using it for the tableview so that the table view shows blank cells , where user can punch data.
    I need to do some validations if the cell is initial(user have not enterd any data and press the button)
    Now the problem is that , all cells conatin a SPACE (dont have an idea where it is coming from) and thus cells are not INITIAL.
    I tried using condense and replace all occurences of cl_abap_char_utilities=>cr_lf , but the space is not removed.
    Any one having any idea , why this space is coming or how INITIALIZE the work area.
    Regards,
    Anubhav

    Hi Vijay,
    The code is written in
    RENDER_CELL_START
    Code snipet:
    DATA: o_ip_desc TYPE REF TO cl_htmlb_inputfield,
                o_fr TYPE REF TO cl_bsp_find_and_replace,
                o_bee  TYPE REF TO cl_bsp_bee_table.
    DATA: find TYPE string.
      DATA: replace TYPE string.
    WHEN 'SLA_DESC' .
            CLEAR replace.
            CLEAR find.
            replace = `value=""` .
            find = `value=" "`  .  <---& n b s p(is displayed as space here)
            replace = replace.
            o_fr = cl_bsp_find_and_replace=>factory( find = find
                                                                      replace = replace
                                                                      mode =  `FIRST_OCCURRENCE` ).
            o_ip_desc = cl_htmlb_inputfield=>factory( id = p_cell_id
                                                      maxlength = '6'
                                                          size = '6'
            o_ip_desc->value = m_row_psc_main_ser->sla_desc.
            CREATE OBJECT o_bee.
            o_bee->add( level = 1 element = o_fr ).
            o_bee->add( level = 2 element = o_ip_desc ).
            p_replacement_bee = o_bee.
    Regards,
    Anubhav

  • Blank records are showing as '0' in Analytical View

    Hi,
         How to avoid blank records not to be shown as '0' in Analytical View?  Can you please help me on this?
    For your information: from the above image, there's no data for column 3 for Fiscal Period 005 - 012 but it's displaying as '0' rather than showing it as blank while I do a data preview of an analytical view.
    Regards,
    Antony Jerald.

    Hi,
         The analytical view generated in Hana is based on Bex query imported from BW.
         Actually I'm calculating Year till date (YTD) Last Year(LY) Sales, TY(This year) Sales based on posting period.
         In Bex query for YTD Sales last financial year data its posting period would be from 1-12(ie., for the entire last year what's my sale).
          While doing calculation for YTD current year, since we are in posting period 4 which is july month(i.e,calculation would be from 1-4), rest of the month's would not have any data for YTD Current year.  It's showing as blank in Bex query.  But hana analytical view is displaying as '0' which ideally should come as blank. 
         Kindly let me know how can we handle this.
    Regards,
    Antony Jerald.

  • How to get rid of blank space showing above my pages

    Hi:
    I built my site dyingforthetruth.com using Muse (thanks, it's pretty nifty!), following a video tutorial you provided.
    I've ended up with a blank space showing above all pages, and much trying with the blue lines and rebuilding my header strip has NOT succeeded in fixing it.
    Here's a snapshot of the top left part of the "main" master, showing the blue lines and the space at the top.
    You can see what it looks like on the web by going to the site URL (dyingforthetruth.com).
    Can you please tell me how to fix this. I find it a bit strange to see all my pages for this site coming up in all 5 browsers I've tried (IE, Chrome, Firefox, Opera, Safari) with a pronounced gap at the top of them all.
    Thanks!

    Go to Page> Page Properties and on the "Padding" section set "Top" to 0. That should do it.
    If you are on a master page make sure that the top blue arrow is at 0. That arrow controls the top of page, and you need to have a padding of 0 for what you want.

  • IDoc to file - how to delete a blank record at the end of the file.

    Hi,
    My senario is IDoc to file.  I have successfully implemented this using FCC. But when i checked the flat file, it has a blank record at the end of the file( i think PI adds one blank line/record at the end of the file).  Please suggest me What i need to do, to delete the blank record .
    Thanks & regards
    Sreeni

    Kindly Check below.
    Check whether the problem is at mapping level of  adapter level.. to do this count no. of rows/IDOC before mapping and after mapping in IE and no. of rows in the output file.
    Thnx
    Subbu

  • XI to BW  RFC showing blank records in BW

    Hello everybody,
    Here is our scenario. XI picks up an xml file using File adapter and executes some mapping in XI and sends to BW to make an RFC call and data is being inserted to a table.
    This was working perfectly fine until I tested the scenario with a different XML file, all records showed up blank (there are 2 rows but all the values are blank). Nothing wrong with the XML file, I just changed one of the date fields. From then on, even if I test with the old XML file, it is showing up blank in BW.
    We did not touch the configuration on XI nor BW. All settings are the same as it was before..no changes.
    No errors on MONI, the message is going out of the adapter in correct format. So no errors on XI side.
    Any ideas to solve this problem would be deeply appreciated.
    Thanks
    Karthik

    HI,
    Test  the mapping with live data from SXMB_MONI. and check the target structure is populated correctly or not.
    Also check the is RFC is throwing some exceptions , Any data format exception may occure here. For this check the data type of RFC and try to compare with input values.
    Also do the Cache Refresh in From XI home page ->Administration->Cache Overview.
    Also refresh the Reciever Determination and Reciever Agreement .
    Hope this helps,
    Regards,
    Moorthy

  • How to elemenate blank records

    dear All,
    i am facing the report level problem. i have one char structure and key fig structure .in rows i have placed char structure and units key figure structure kept in columns. in my reports some unit haveing values some units don't have any values .user is asking any unit field don't have values don't display in report i try to create condition but not working properly. after executing the repot ,query properties i saw "zero SUPPESSION" tab i checked the APPLY ALSO TO MEMBERS OF STRUCTURE STRUCTURE AND APPLY ALSO MEMBER OF STRUCTURE KEY FIGURES .now working fine. i question is how to use this condition in query
    designer level.

    Hello Rama,
    If you do not want to see the blank UOM in the report, then please select the UOM char, try to restrict the UOM with " # "   (exclude) in the report level, so that blank values will not be seen at the query level.
    Hope this may help you.
    Thanks
    PT
    Edited by: PT on Apr 19, 2011 3:29 PM

  • How to delete blank records in internal table

    Hi.
    please tell me how can i delete blank records in an internal table.
    thnx

    In that case
    Suppose you have 10 fields in internal table and if any of them is blank, you need to delete record.
    Try this command
    delete itab where field1 is initial or
                      field2 is initial or
                      field10 is initial.

  • Showing Blank Records oracle forms 11g

    Deal all..
    i am using oracle forms 11g ,  i created a form by using data block wizard & layout wizard  , but when i run the form, the form running successfully  in  browser,  url is (  http://arun-pc:9001/forms/frmservlet), but  it is showing empty records.
    when i check with sql  plus user Scott ,  i found 10 records in departments table ,  same user and same table  i used in oracle forms.
    i don't know what is the  problem.. i am new to oracle forms please help me..
    i am waiting 4r your valuable reply
    thank s in Advance..

    Hello. Mr.harsh shah...
    Thank u for your reply..
    I follow the link what u given in above post..  But still i have the same issue..  i am not sure, but   i think i have problem with my Environment, bcz in many blogs i read that oracle forms is not recommended to use with 64 bit OS. and second , iam not using developer suite 10g,
    currently i am using,
    operating system:  windows server 2008 r2
    weblogic server :-  wls1036 (64bit)
    JDK :- 7u17 64bit
    Oracle forms :-  11g
    and database in another host , just i edit tnsnames.ora file in forms directory.  the following are my configuration options
    Oracle Forms and Reports Installation
    Configuration Options
      Middleware Home Location: C:\Oracle\Middleware
      Oracle Home Location: C:\Oracle\Middleware\Oracle_FRHome1
      Oracle Instance Location: C:\Oracle\Middleware\asinst_1
      Oracle Instance: asinst_1
      Domain Option: Create Domain
      Domain Name: ClassicDomain
      Domain Home: C:\Oracle\Middleware\user_projects\domains\ClassicDomain
      Domain Host Name: WIN-DMJUC51KRHF
      Domain Port No: 7001
      User Name: weblogic
      Automatic Port Detection: true
      Administrator Console: http://WIN-DMJUC51KRHF:7001/console
      EM Console: http://WIN-DMJUC51KRHF:7001/em
      EMAgent URL: http://WIN-DMJUC51KRHF:5155/emd/main
      Forms URL: http://WIN-DMJUC51KRHF:8888/forms/frmservlet
      Reports URL: http://WIN-DMJUC51KRHF:8888/reports/rwservlet
    i check all the links above, all services showing running successfully..  but when i run the form , i dont fine any records , showing empty and blank records..
    please give me clarification ...
    Thank u very much..
    Arun

  • TS3999 How do I print from i cloud? I can access and add appointments but cannot print. Only a blank page shows up.

    How do I print from i cloud? I can access and add appointments but cannot print. Only a blank page shows up.

    Select the day. then look on the bottom left where you will see the word, TODAY, select it then select print frame.

  • DVD will read movies, data CDs, but data DVDs show as blank (recordable)

    My MBP started not reading data DVDs including older ones that have been accepted in the past.
    The behavior is that the data DVDs show up as blank recordables.
    I can read data CDs and Movie DVDs.
    I've read a few threads that suggested resetting the PRAM, which I will do later (can't right now).
    I wanted to post in case anyone else has seen this behavior. I don't often ready data DVDs so I can't say if this happened after a particular system update.

    One more thing. The erzatz "blank" dvds do not show up in the Finder. The only way to eject them is with Disk Utility.

Maybe you are looking for

  • How can we copy personalization from one to an othere resp/function

    guys, As we use people and maintain function to maintain employee information, in this function we have made personalization and working fine, but after restricting function which is appearing on others button like (absence, qualification, previous e

  • Mutliple R/3 Systems connected to 1 APO System - Location CIFing issue

    Hi, I have a situation like 2 R/3 systems(S1&S2) are connected to 1 APO system.  S1 is old system and S2 is new system, I am trying to connect with APO system. In Development environment: I have IMs in S1 to APO system, to CIF the master/transactiona

  • Games on Touch won't play

    Yesterday, everything was working fine. I sync'd last night, and when I went to play the games on my Touch...nothing. The game seems like it's going to start, but then it just goes back to the main apps menu screen.

  • Disparity in scores despite same reports?

    After reading the forums for a while i've finally decided to sign up and join everyone.I've been subscribed to experian for a while and it shows my score's coming in at a healthy(considering my currently sky high utilization) 632, however I found my

  • PSE 10 Organizer; Fichiers TIF et JPG non reconnus.

    Bonjour     J'ai scanné des clichés 35 mm sur scanner à plat(EPSON V500) et scanneur films et diapos (Silvercrest).     Sorties en JPG et TIF dans les deux cas.     Quelques uns de ses fichiers avaient été correctement importée dans PSE 10.     Après