Display Report Level Filter value and Input Controls Value

Hi,
Please let me know how to display Report Level Filter value and Input COntrol values in the report.
I have 2 tabs in the WebI Report. The first tab has the summary details about the other tabs like reprot desc, prompt values, reprot filter values,etc.
In the 2nd tab I have the actual report which has input controls defined, prompt values and global level report filters.
Can anyone please tell me how to display the Report level filter values and the Input Control values in the first tab report.
For ex: Tab 2 has a Report level filter: Region = NA
I need to display in Tab 1 in as Region: NA
I used the function ReportFilterSummary but that is giving me other details, I want only the object name and the value.
Also how to dispaly the Input Control values in the tab 1.
Please let me know if you have any suggestions for this issue.
Thanks

did you try
=ReportFilter([Year])
if you are making report filter over the year, it will return the value of the filter
by the way, the filter should be applied over all the report not to a specific block to be able to get the correct value
the Input control also considered as report filter, only if you're applying them on the level of the report, if you applying an input contron over a specific block or chart, you will not get the values for ReportFilter
good luck

Similar Messages

  • Is it possible to enter "Input Control" values on the report prompts screen? How?

    Our report users are used to enter their parameters on the prompt.
    I have created a new report on WEBI XI 3.1. and this report has some prompts and also input controls.
    That means, when the user wants to run the report they have to enter their parameters on the report prompt and then they have to navigate to the input control and select the values.
    That makes them feel like they are entering parameters twice for a report.
    Is there any way the initial value for an input control can be entered on a report prompt screen?
    So, the user enters the values of the prompt and the initial values of the input controls together only once at the prompt screen?

    Thank you very much for the confirmation Amit.
    Yes, I considered adding a prompt instead of an input control but this input control selects data based on a custom calculation performed in a variable at the report level. To create a prompt on the query I would have to make the calculation at the universe level.
    Anyway, it seems 'Input Control" may be a useful tool for our reports, so we decided to get our report users accustomed to the input control tool.
    Thanks again for the help.
    Francisco

  • Setting a default date value for input controls

    Hi All,
    I have created a webi report that shows  - among other things - the activity between 2 dates. I have created 2 input controls where the user can select the start and end dates from a calendar for this.
    The displayed data is restricted by a date variable which 'unfiltered' contains 1 month of data.
    'out of the box' I can set these input controls and all works fine, but each time I open the report the same values that I set last time are set in the input controls. I want to have these default to being between today and 7 days ago with the user then able to move away from  this action, rather than the 'window of interest' slowly slipping into the past.
    I have looked at the forum posting Re: Default Input Control Values in WebI doc on Open which describes setting a default on the objects in the report filter pane, but this does not appear to be possible as these are 'grayed out' and i need both the input controls to run from a single object.
    Does anyone have any ideas how this might be achieved?
    Thanks in advance
    John

    Hi,
    Sorry, I've obviously not explained myself very well. Please let me try to elaborate...
    The report I am writting is to function as a dashboard (yes, i know - Xcelcius/Dashboard Designer - don't ask!) but asking the user to enter a prompt for the date range is not an option here. My only options for this are effectively the input controls or the report filters. I want to be able to achieve the effect of entering =CurrentDate() in the 'default value box in the same way that I would if writting a Reporting Services report. However the WebI controls do not accept expressions for this.
    So...
    I have one date object with a months worth of dates in it.
    I have two input controls associated with this date object to allow the user to select a narrowed date range from this month of data.
    I need one of these to default to 'today' and the other to default to '7 days ago' (I can do the calculations to get both dates, the bit I cannot get past is applying these dates as defaults)
    can anyone help me with step 3 (in bold) above?
    John

  • Default Input Control Values in WebI doc on Open

    Is there a way to select default Input Control values for a WebI document on Open ?  I have a WebI document/report with no prompts in the query (as I don't want to restrict the data available on refresh) with input controls on Year and Month. The report is scheduled to refresh data each night. This is a standard public report that many users open as Read Only through an Opendoc URL hyperlink to the latest instance.  I would like to always set the input control values to the current year and month so that the most current data is displayed on the report by default when it is opened as this is what the majority of users will want to see on the report.
    I know that prompts can be used for the data filter but we do not want the data refreshed for each user as it is scheduled to refresh nightly and we want them to be able to change the input controls to view other years/months without requiring a refresh as these past months data is not dynamic.
    Thanks, Faith

    I meant the following:
    When you are in the report editing mode at the top right corner of WebI window you can find the "Show/Hide report filter toolbar" button. After activation this feature you'll be able to drag your variables over the pane that appears.
    If you are using input controls you can create new input controls based on this variables instead of controls based on Date, Month and Year dimensions and set the "Today", "Current month" or "Current year" as theirs default values.

  • Report level filter impact on non-merged dimension

    Hi Experts,
    I have a problem in Webi 3.1 sp4.
    We have three dataproviders from same universe.  two dataproviders are linked with merged dimensions and third one is from independent table which has only one value (not related to other two data providers).
    Created report with one block(block1) contained objects from first two dataproviders. Object from third dataprovider is placed on report body above block1.
    Everything working fine.
    If we create a report level filter with detail objects from first two dataproviders, value from third dataprovider disappears.
    I don't have problem if create filter at block level.
    Please help to resolve this issue.
    Thanks
    Akshara...

    That is a previous XI version.  I meant within XI 3.1 - between Support Packages, is it a change from SP03 for example?
    If it is (b/ween SP03 - Sp04 ) then you should log a support message

  • Reporting level Currency translation and group level Currency translation

    Hi All,
    Could any body explain me reporting level Currency translation and group level Currency translation.Please expalin me step by step scenario.
    Thanks in advance.
    Setty.

    Hi Jian,
    In my recent implementation completed, business only had one currency to deal with i.e. USD. Data was coming from ECC and we loaded all the data in LC instead of USD using transformation *NEWCOL(LC). Next, you can maintain a rate of 1 in the rate model and run the currency conversion.
    This will generate the same data values against USD. So, your statement " if we load LC and than convert it into USD, the data vulu will de double." is incorrect. In the system, you will have same set of values against LC as well as USD.
    I suggest that you configure Currency Conversion for future reqmts if any.
    Regarding BCF, balances from previous year (Balance Sheet Accounts) will need to be carried forward as opening balances to next year else your BS won't give true picture.
    Regards,
    Ashish

  • How to get po delivered value and po invoived value?

    HI experts,
    i need to create bex query with PO total value,  PO NET VALUE Item wise, po delivered value,
    po still remaining value and po invoiced value.
    AFter extensive search i got 0net_po_val for PO net value item wise.
    Remaining 4. Fields am unable to search in bw targets. So how to proceed?? Any inputs?
    Thanx in advance.
    br,
    Ravi kiran

    Hi Ravi,
    Please find the logic for the same:
    PO Delivered Value
    EKBE (BEWTP = E and SHKZG) SHKZG = S   is positive  and
    SHKZG = H is negative.
    PO Still Remaining Value
    PO Value- PO  Delivered Value
    PO Invoiced Value
    EKBE(BEWTP = Q and SHKZG) SHKZG = S   is positive  and
    SHKZG = H is negative.

  • How to retrieve the procedure value and pass the value to a form field

    How to retrieve the procedure value and pass the value to a form field?

    Set property for the field and the value is the actual procedure/function.
    Cheers

  • Report level Filter

    Hi All,
            I Have small Requirement like i have created reportlevel filter (Reporting Date) if i need select any date it display their corresponding values now .
    if select any date it display their corresponding values now. ok
    but when ever i select Reporting Date(ALL Values) so i need to display the values of the last date values i.e(08/19/2014) date value how will achieve this
    PLEASE URGENT REQUIREMENT.

    Hi Saurabh,
                    Thanks for your reply but as per  Requirement when report opens it will be in default filter value which will be as below
    and when it is in the above value i need to display data in the table corresponding to the last date i.e (08/19/2014) and not sum of data for all the dates as it usually shows.
    and regarding input control i can select a default date but the default date changes dynamically and we cant pick the last date i.e(08/19/2014) on the next day of refresh.........

  • Hyperlink and Input Control

    Hi,
    Right now am struck at creating input control. Basically, the requirement is we have a crosstab onto which we have 3 measures based on the equipment group and type as shown in the below screenshot. When we click on any values from Active assets it navigates to child report and shows the info about active assets. Similarly, when clicked on Cumulative MTBF it should navigate to the same child report and show the table related to Cumulative MTBF. Now in child report what condition should I place so that on click of any of the measure ,respective table should be popped up and other tables should be hidden in the child report.
    Thanks & Regards,
    Anila.

    HI,
    You can selet the reportpart via the hyperlink wizard, and set onlyt this part as shown, see screenshot below ! it works !
    (select part via right click and confirm
    I'm on webi: 4.1 SP 3 Patch 2
    if you have to do it manually : http://scn.sap.com/blogs/hamueller/2012/08/16/displaying-webi-report-parts-via-opendocument-in-bi-40
    RID= Report ID
    BID= Block ID
    and I added to my doc Open document lingo (hyperlink) through the whole BI platform, thanks for the idea
    Grtz
    Koen

  • ADF Faces: How do I set values for input controls in an af:table

    Use case: user enters master/detail information into an input form using an af:table for the desired number of detail rows.
    I have an ADF Faces input form with master level input controls, and an af:table (bound to a backing bean CoreTable) for the detail data set.
    The input controls are value bound to updateable view objects built from entity objects, with the appropriate view links providing master/detail iterators.
    Once the user has entered the master keys (via inputTexts, and selectOneChoices), I create a row in the detail VO, thus creating a visible blank row in the af:table.
    The user then completes the key for the detail row (in the af:table) by selecting a value in a selectOneChoice (in a af:column) with autoSubmit on and a valueChangeListener that sets the VO row attribute with the new value.
    The user then continues to enter into the remaining inputTexts and selectOneChoices in the af:columns until all values have been entered.
    I do not have autoSubmit on for any input controls in the af:columns other than the key, for performance improvement.
    The user can then use a command button (which has an action method) to create another row in the af:table.
    But, (in the action method) I need to set the values for the 1st detail VO row attributes, from the input controls, before creating another row.
    The input controls are bound to backing bean CoreInputText and CoreSelectOneChoice objects, and they have not set their values at this point, even though I have partialSubmit on for the "New Row" command button.
    I do not value bind the input controls in the af:columns to the backing bean objects, because we need to display data for all rows entered into the af:table.
    Any advice on the best way to perform this operation would be very appreciated!!!!

    Thanks for the reply Steve!!
    Yes, I followed the techniques in Screencast#7, and it works great in my edit page.
    But I am having problems with my input form.
    I actually have master/detail/detail relationship for which I am creating an input form.
    I created the input form as a copy of the edit form, and am making revisions as necessary.
    I created new view objects for the input form (from my three entity objects), which have the "Tuning" set to retrieve "No Rows (i.e. used only for inserting new rows)"
    I added an invokeAction that binds the "CreateInsert" action on the master iterator, so when the page is first displayed, the master level controls are available for data entry (as in 13.6.2 in the Developers Guide): but the first level detail controls are not rendered, and the af:table (for the second level detail) is rendered but with no rows.
    Once the user enters key values for the master (a three part key), I manually create a first level detail row by executing the "CreateInsert" action binding for the first level detail iterator.
    Continuing on, the user then enters a key value for the first level detail I manually create a second level detail row using it's "CreateInsert" action binding.
    Now the user has a form with all master and first level detail controls completed and one empty row in the af:table for it's first entry.
    The key column in the af:table has autoSubmit on, and an value change listener. That listener uses it's getNewValue() to set the key value ("locationCode" in this case) using
    setLocationCode from the ViewRowImpl. Here is that value change listener:
    public void locationChanged(ValueChangeEvent event) {
    if (null != event.getNewValue()) {
    LocObsCreateViewRowImpl locCreateRow = (LocObsCreateViewRowImpl)appMod.findViewObject("LocObsCreateView").getCurrentRow();
    if (null == locCreateRow.getLocationCode()) {
    locCreateRow.setLocationCode(event.getNewValue().toString());
    Now comes my problem: once they have entered the values in the remaining columns, they can use a command button to create another row in the 2nd detail iterator, thus creating another visible empty row in the af:table. But the values from the first row (other than the key column) are not assigned to the row in the collection and I can't figure out how to set values in the collection's row.
    I imagine I'm missing something using bindings and the Request Processing Lifecycle, and after reading this I can see how much manual work is going on.
    The users have specified the need to have all information available on one page, so I've designed it so they can insert and iterate through the first level detail collection.
    They have also asked to not use the mouse; they are looking for a "heads-down-data-entry" system.
    Again, I really appreciate any advice you could give.
    Jeffrey

  • Hide "All values" in input controls?

    Hey guys,
    I'm wondering that I could not find my question already in this forum but however - this is my question:
    Isn't it possible to hide the value "All values" in the input controls? In some cases it just doesn't make sense to leave that into the input-control-field.
    I.e. if I want to give the possibility to switch between Euro, kEUR and mEUR I need to hide the "All values" radio button (see screenshot).
    But how can I do that?
    Thanks for your help !
    Oliver

    Hi,
    That was a very useful answer!
    I have a quick question - I am in BO 4.0 (not 4.1) and I would like to default the "All values" selection to a specific value.
    I have defined the input control using Var_Currency_Type (dimension) and have assigned two values i.e. 'USD' & 'Local Currency'.   The default value is 'USD'.
    The input control works fine. When I select either USD or Local Currency.
    but, I do not see any table when I select 'all values'.  I would like it to display 'USD' when user selects 'All Values'.
    =======================================================================
    In the format table (two tables - one for USD and one for Local currency), I have put in the formula:
    x - Hide when following formula is true
    =ReportFilter([Var_Curency_Type])<>"USD" -- for USD table
    and = ReortFilter([Var_Currency_Type])<>"Local Currency" for Local Currency table.
    ======================================================================
    Does anyone have encoutered this situation.  Could you please share the solution?
    Thanks for your time.

  • Purchase order report with basic price and Excise duty values

    Hi All,
    Is there any standard report in SAP to get the Purchase order basic price / qty and its Excise duty values ? Since we are including Excise duties for non - codified items (w/o material master and with cost center 'K') Purchase order and the ed values are added to the cost and the requirement is to see the split up (Basic priceEdEcs+Hcs)for these Purchase orders for the vendors. If there is no std report then please let me know how to link Purchase order table with this Condition value table in query to get the desired report.
    Thanks in advance
    Benny

    Hi,
    there is no standert report to fullfill this requierment
    you have to create this report with the help of abaer
    for that which tax code you are using its importnat thing
    for po table EKPO
    1. A524 (Normal supply point / Material) it will return condition record number for condition type.
    2. KONP (Conditions (Item)) .
    3. J_1IMTCHID (Combination of Material Number and Chapter ID).
    4. J_1IEXCTAX (Tax calc. - Excise tax rates
    5 get the IR no. from RBKP and RSEG, and get the relevant FI doc no. and goto BSET table
    for IR number  to get from table apply logic for doc type RE ,you will get fi number nad in refernce field you will get invoice number + fiscal year
    Map this by refernig on po for which grn and invoice happen
    Regards
    Kailas Ugale

  • How to create a display value and a return value for an item

    Hi! I have an item on a form. I want the default value for my item to be :":APP_USER", but the return value, to be the id of my user. I tried to create a PL/SQL Expression for the default item, but it doesn't work. What do I miss?
    It should be something like this, but it's not.
    begin
    select first_name || ',' ||last_name as "Employee",
    id_employee -- display value,return value
    from employees
    where id_employee = :APP_USER;
    end;
    Does anyone know?
    Thanks!
    Vitaly

    Hi VItaly,
    Display value and return value concept applies very well in case of a Combo box if i am correct, I don't know what type of item is your's.
    But any way, you can have a workaround like,
    Create a hidden item such that it's default value should be ID of the user which can be get from db by using :APP_USER.
    Use the this item for your references.
    I think this will meet your requirement.
    Thanks
    Kumaraswamy.

  • Report with goods receipt value and invoice posting value

    Is there any standard report with goods receipt value and invoice value (the value with which invoice is posted.

    Hi
    Please check MC$4 transaction, mey be helpful.
    regards
    Srinivas

Maybe you are looking for