Blank Row in ALV Grid Display

In ALV Display I want to have a BLANK row everytime the value of 'Cross Company Code Document Number' (BVORG) changes.
Is there a way to use the Sort Option of "REUSE_ALV_GRID_DISPLAY" to do this? Or is the only possible way is by modifying the ITAB that is being passed for display?
If ITAB is the only method to do it then how should I go about making this happen?
Thanks-
Rohit.

if you do again sort then blank rows will come top,so make sure that should not do sort after inserting blank rows.
please sort it before inserting blank row .
sort itab by fields..
loop at itab.
endloop.
do not sort here.
Thanks
Seshu

Similar Messages

How to change a color for a row in ALV grid display

Hi,
how to change a color for a row in ALV grid display based on a condition.Any sample code plz

Hello Ramya,
Did you check in [SCN|How to color a row of alv grid]
Thanks!

How to color a row in ALV grid display

Hi,
A few rows in the output of ALV grid display should be shown in different color.How can I achieve this?

Hi,
Try out this code
DATA : BEGIN OF G_T_CASH OCCURS 0,
 PARTICULARS TYPE CHAR120,
 AMOUNT1 TYPE CHAR20,
 AMOUNT2 TYPE CHAR20,
 AMOUNT3 TYPE CHAR20,
 ROW_COLOR TYPE CHAR4,----
add this in the internal table for alv
 END OF G_T_CASH.
CLEAR G_WA_CASH.
G_WA_CASH-PARTICULARS = 'Opening Cash Balance'.
G_WA_CASH-AMOUNT1 = G_DMBTR.
G_WA_CASH-AMOUNT2 = ''.
G_WA_CASH-AMOUNT3 = ''.
while appending other values also add the following code
G_WA_CASH-ROW_COLOR = 'C200'.----- C200 depicts light gray color
APPEND G_WA_CASH TO G_T_CASH.
add the following code in layout
MOVE 'ROW_COLOR' TO WA_LS_LAYOUT-INFO_FIELDNAME.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_BYPASSING_BUFFER = ' '
 I_SAVE = 'A'
 I_CALLBACK_PROGRAM = SY-REPID
I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
 I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
 IS_LAYOUT = WA_LS_LAYOUT
 IT_FIELDCAT = G_T_CATALOG
 IT_EVENTS = GT_EVENTS
 TABLES
 T_OUTTAB = G_T_CASH[]
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Let me know if the problem still persist.
Regards,
Janaki

Selecting Multiple Rows from ALV GRID Display

Hi,
I am having a ALV GRID Display. I want to select multiple rows from the Output and move them to an internal table.
Please let me know how do I acheive this.
Thanks in advance,
Ishaq.

Hi,
Have a look on the following code. It displays the selected rows which hv been selected in basic list.
TABLES:
spfli.
TYPE-POOLS:
slis.
DATA:
BEGIN OF t_spfli OCCURS 0,
 checkbox.
 INCLUDE STRUCTURE spfli.
DATA: END OF t_spfli.
DATA:
t_sspfli LIKE STANDARD TABLE OF t_spfli .
DATA:
fs_spfli LIKE LINE OF t_sspfli.
DATA:
fs_layout TYPE slis_layout_alv,
w_program TYPE sy-repid.
SELECT *
FROM spfli
INTO CORRESPONDING FIELDS OF TABLE t_spfli.
*fs_layout-info_fieldname = 'COLOR'.
fs_layout-box_fieldname = 'CHECKBOX'.
w_program = sy-repid.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
 i_callback_program = w_program
 i_callback_pf_status_set = 'FLIGHT'
 i_callback_user_command = 'SPFLI_INFO'
 i_structure_name = 'SPFLI'
 is_layout = fs_layout
TABLES
 t_outtab = t_spfli
EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form FLIGHT
 text
 -->RT_EXTAB text
FORM flight USING rt_extab TYPE slis_t_extab..
SET PF-STATUS 'FLIGHT' EXCLUDING rt_extab.
ENDFORM. "FLIGHT
*& Form SPFLI_INFO
 text
 -->UCOMM text
 -->SELFIELD text
FORM spfli_info USING ucomm LIKE sy-ucomm
 selfield TYPE slis_selfield.
selfield-refresh = 'X'.
CASE ucomm.
 WHEN 'FLIGHT'.
 LOOP AT t_spfli.
 IF t_spfli-checkbox = 'X'.
 t_spfli-checkbox = ' '.
 t_spfli-color = 'C51'.
 MODIFY t_spfli TRANSPORTING checkbox.
 fs_spfli = t_spfli.
 APPEND fs_spfli TO t_sspfli.
 ENDIF.
 ENDLOOP.
 WHEN 'EXIT'.
 LEAVE PROGRAM.
ENDCASE.
CLEAR fs_spfli.
fs_layout-info_fieldname = 'COLOR'.
fs_layout-confirmation_prompt = 'X'.
fs_layout-key_hotspot = 'X'.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
 EXPORTING
 i_callback_program = w_program
 i_structure_name = 'SFLIGHT'
 is_layout = fs_layout
 TABLES
 t_outtab = t_sspfli
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
REFRESH t_sspfli.
ENDFORM. "SPFLI_INFO
Regards,
Chandu

Selecting multiple rows in ALV grid display

Hi,
I have an ALV grid display in my report.
My grid contains multiple rows.
I have to select multiple rows at a time, to perform some operations on the selected rows.
How can it be achieved?
Thanks,
Sandeep.

Hi ,
you have to use a box fieldname in the report to be able to select multiple lines at a time :
- in your internal table declaration put the first field as 'box_fieldname' of type c1
- then in your work area for layout add, lwa_layout-box_fieldname = 'box_fieldname'
- in the perform for handling user commands, all selected lines will have an "X" in the field name 'box_fieldname'
Thanks and Regards,
Dev.

Color a specific row in ALV GRID display when user clicks on that row

hi
i have the entire code ready of how to check the line selected by the user and also to color that line but after settings those parameters
for to refresh the GRID so that the row apppears coloured .plz reply soon.... points will be awarded.....
wat i have done is
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
 i_callback_program = i_repid
 i_callback_user_command = 'USER_COMMAND'
 is_layout = it_layout
 it_fieldcat = int_fieldcat
TABLES
 t_outtab = int
EXCEPTIONS
 program_error = 1
 OTHERS = 2.
to display the GRID then when user clicks on any row this module gets called
 FORM user_command USING r_ucomm TYPE sy-ucomm
 rs_selfield TYPE slis_selfield.
 READ TABLE int INDEX rs_selfield-tabindex.
 int-rowcolor = 'C410'.
 MODIFY int INDEX rs_selfield-tabindex TRANSPORTING rowcolor.
 it_layout-info_fieldname = 'ROWCOLOR'.
then again i call 'REUSE_ALV_GRID_DISPLAY'
to display the GRID with the user selected line colored . the problem with this is when u go back from this screen u go to the previously displayed grid ....... whihc i dont want .....
 ENDFORM. "user_command

Hi,
By using following code,you can set the colors for each row,
Change this based on your requirement.
TABLES VBAK.
TYPE-POOLS SLIS.
Data Declaration
TYPES: BEGIN OF T_VBAK,
 VBELN TYPE VBAK-VBELN,
 ERDAT TYPE VBAK-ERDAT,
 ERNAM TYPE VBAK-ERNAM,
 AUDAT TYPE VBAK-AUDAT,
 VBTYP TYPE VBAK-VBTYP,
 NETWR TYPE VBAK-NETWR,
 VKORG TYPE VBAK-VKORG,
 VKGRP TYPE VBAK-VKGRP,
 LINE_COLOR(4) TYPE C,
 END OF T_VBAK.
DATA: IT_VBAK TYPE STANDARD TABLE OF T_VBAK INITIAL SIZE 0,
 WA_VBAK TYPE T_VBAK.
ALV Data Declaration
DATA: FLDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
 GD_LAYOUT TYPE SLIS_LAYOUT_ALV,
 GD_REPID TYPE SY-REPID.
START-OF-SELECTION.
PERFORM DATA_RETRIEVAL.
PERFORM BLD_FLDCAT.
PERFORM BLD_LAYOUT.
PERFORM DISPLAY_ALV_REPORT.
Build Field Catalog for ALV Report
FORM BLD_FLDCAT.
FLDCAT-FIELDNAME = 'VBELN'.
FLDCAT-SELTEXT_M = 'Sales Document'.
FLDCAT-COL_POS = 0.
*FLDCAT-EMPHASIZE = 'C411'.
FLDCAT-OUTPUTLEN = 20.
FLDCAT-KEY = 'X'.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'ERDAT'.
FLDCAT-SELTEXT_L = 'Record Date created'.
FLDCAT-COL_POS = 1.
FLDCAT-KEY = 'X'.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'ERNAM'.
FLDCAT-SELTEXT_L = 'Cteated Object Person Name'.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'AUDAT'.
FLDCAT-SELTEXT_M = 'Document Date'.
FLDCAT-COL_POS = 3.
FLDCAT-EMPHASIZE = 'C110'.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'VBTYP'.
FLDCAT-SELTEXT_L = 'SD Document category'.
FLDCAT-COL_POS = 4.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'NETWR'.
FLDCAT-SELTEXT_L = 'Net Value of the SO in Document Currency'.
FLDCAT-COL_POS = 5.
FLDCAT-OUTPUTLEN = 60.
FLDCAT-DO_SUM = 'X'.
FLDCAT-DATATYPE = 'CURR'.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'VKORG'.
FLDCAT-SELTEXT_L = 'Sales Organization'.
FLDCAT-COL_POS = 6.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
FLDCAT-FIELDNAME = 'VKGRP'.
FLDCAT-SELTEXT_M = 'Sales Group'.
FLDCAT-COL_POS = 7.
FLDCAT-EMPHASIZE = 'C801'.
APPEND FLDCAT TO FLDCAT.
CLEAR FLDCAT.
ENDFORM.
Build Layout for ALV Grid Report
FORM BLD_LAYOUT.
GD_LAYOUT-NO_INPUT = 'X'.
GD_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
GD_LAYOUT-INFO_FIELDNAME = 'LINE_COLOR'.
GD_LAYOUT-WINDOW_TITLEBAR = 'GRID DISPLAY'.
GD_LAYOUT-CONFIRMATION_PROMPT = 'X'. This asks the confirmation before leaving the screen.
ENDFORM.
Display report using ALV grid
FORM DISPLAY_ALV_REPORT.
GD_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
 I_CALLBACK_PROGRAM = GD_REPID
 IS_LAYOUT = GD_LAYOUT
 I_CALLBACK_TOP_OF_PAGE = 'TOP_OF_PAGE'
 I_GRID_TITLE = 'SALES DOCUMENT HEADER'
 IT_FIELDCAT = FLDCAT[]
 I_SAVE = 'X'
TABLES
 T_OUTTAB = IT_VBAK
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
Retrieve data from VBAK table and populate itab IT_VBAK
FORM DATA_RETRIEVAL.
DATA LD_COLOR(1) TYPE C.
SELECT VBELN ERDAT ERNAM AUDAT VBTYP NETWR VKORG
UP TO 20 ROWS
FROM VBAK
INTO TABLE IT_VBAK.
LOOP AT IT_VBAK INTO WA_VBAK.
LD_COLOR = LD_COLOR + 1.
IF LD_COLOR = 8.
LD_COLOR = 1.
ENDIF.
CONCATENATE 'C' LD_COLOR '10' INTO WA_VBAK-LINE_COLOR.
MODIFY IT_VBAK FROM WA_VBAK.
ENDLOOP.
ENDFORM.
FORM TOP_OF_PAGE.
DATA: T_HEADER TYPE SLIS_T_LISTHEADER,
 W_HEADER TYPE SLIS_LISTHEADER.
W_HEADER-TYP = 'H'.
W_HEADER-INFO = 'WELCOME HEADER LIST'.
APPEND W_HEADER TO T_HEADER.
W_HEADER-TYP = 'S'.
W_HEADER-KEY = 'REPORT:'.
W_HEADER-INFO = SY-REPID.
APPEND W_HEADER TO T_HEADER.
W_HEADER-TYP = 'S'.
W_HEADER-KEY = 'DATE:'.
CONCATENATE SY-DATUM6(2) ' / ' SY-DATUM4(2) ' / ' SY-DATUM(4) INTO W_HEADER-INFO.
APPEND W_HEADER TO T_HEADER.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
 IT_LIST_COMMENTARY = T_HEADER
ENDFORM.
Reward points,if it is useful.
Thanks,
chandu.

Changing font size(bold) or color of a particular row in ALV Grid Digplay

Hi Experts ,
I am having a requirment to highlight some particular rows in ALV Grid Display . To achieve this i need to change font size or make it bold or change color of that row .
Please give me some inputs .
Thanks in Advance.
Vijyeta

Hi
Coloring An Entire Row
Coloring a row is a bit (really a bit) more complicated. , you should add an additional field to your list data table. It should be of character type and length at least 4. This field will contain the color code for the row.
First you have to declaration of our list data table u201Cgt_listu201D.
DATA BEGIN OF gt_list OCCURS 0 .
INCLUDE STRUCTURE SFLIGHT .
DATA rowcolor(4) TYPE c .
DATA END OF gt_list .
Adding the field that will contain row color data
As you guess, you should fill the color code to this field. But how will ALV Grid know that you have loaded the color data for the row to this field. So, you make it know this by passing the name of the field containing color codes to the field u201CINFO_FNAMEu201D of the layout structure.
e.g.
ps_layout-info_fname = <field_name_containing_color_codes>. u201Ce.g. u2018ROWCOLORu2019
You can fill that field anytime during execution. But, of course, due to the flow logic of screens, it will be reflected to your list display as soon as an ALV refresh occurs.
Try this link also:
Possible functionalities in ALV
Regards
Neha

Grey out(disable) a row in ALV grid

Hi,
I want to know how to grey out(disable) row wise in ALV grid display.
i..e.. Few rows in ALV grid display shoud be editable and few rows non editable based on certain condition.
How do we do that....Please help.
Thanks in advance.

Hi,
Since fieldcatalog is used to modify coloum and not the row, the fieldcatalog would not solve the problem.
Thankyou.

Row seperator in the ALV grid display after the various highest level prod.

Hi,
I have a requirement like user wants a row seperator against the various high level products (Each parent material)in ALV Grid display.We made this change but quantity and pricey fields showing the zero's in the blank line.i know that if we use NO-ZERO
in the ALV field catalog , we can remove the zero's from blank line. But other zerou2019s will remove from rest of the line items. User want's the zero's in other line items, but not in the blank line.
We can convert packed fileds into character format, but this will effect to the summing the quantity, price coumns.
If any body have idea on above mentioned.
Regards,
SK.

Hi Suresh,
There is no short cut for this requirement. You have to do following steps.
1. Change the data type of column to char.
2. Programatically find the totals.
Reagards,
Anversha

Not able to download all the rows to excel sheet from alv grid display

Hi experts,
I am not able to download all the rows which are displayed in alv grid display for some material numbers.
for some materials i am able to download, i used two ways to download 1) from icon(local file) on grid 2) menu list->export.
i checked in debugging till selecting the spread sheet pop up window, i am able to see all the data in internal table.
Can you suggest me what will be the problem....
thanks in advance,

hi sandeep,
sorry for didnt specify clearly.
note: EX: "asaasdada in this sentence i said " this symbol is special character not the text.
building final internal table code
CALL FUNCTION 'CS_BOM_EXPL_MAT_V2'
 EXPORTING
 capid = p_capid
 datuv = sy-datum
 ehndl = '1'
 mktls = 'X'
 mehrs = 'X'
 mmory = '1'
 mtnrv = p_matnr
 stlal = '1'
 stpst = 0
 svwvo = 'X'
 werks = p_werks
 vrsvo = 'X'
 TABLES
 stb = i_stb
 EXCEPTIONS
 alt_not_found = 1
 call_invalid = 2
 material_not_found = 3
 missing_authorization = 4
 no_bom_found = 5
 no_plant_data = 6
 no_suitable_bom_found = 7
 conversion_error = 8
 OTHERS = 9.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
i_stb1[] = i_stb[].
IF NOT i_stb1[] IS INITIAL.
 SORT i_stb1 BY idnrk.
 DELETE ADJACENT DUPLICATES FROM i_stb1 COMPARING idnrk.
 SELECT bmatn ematn FROM ampl INTO TABLE i_ampl
 FOR ALL ENTRIES IN i_stb1
 WHERE bmatn = i_stb1-idnrk AND
 datuv LE sy-datum AND
 datub GE sy-datum.
 SELECT
 matnr
 bwkey
 verpr
 stprs
 bwprh
 FROM mbew
 INTO TABLE i_mbew
 FOR ALL ENTRIES IN i_stb1
 WHERE
 matnr EQ i_stb1-idnrk AND
 bwkey EQ i_stb1-werks.
 IF NOT i_stb1[] IS INITIAL.
 SELECT matnr werks beskz
 dzeit webaz plifz
 ekgrp
 INTO TABLE i_marc
 FROM marc
 FOR ALL ENTRIES IN i_stb1
 WHERE matnr = i_stb1-idnrk
 AND werks = i_stb1-werks.
 SORT i_marc BY matnr werks.
 ENDIF.
 CLEAR i_ekpo.
 CLEAR i_vend.
 IF NOT i_stb1[] IS INITIAL.
 SELECT ebeln ebelp matnr werks loekz aedat
 netpr peinh
 INTO TABLE i_ekpo
 FROM ekpo
 FOR ALL ENTRIES IN i_stb1
 WHERE matnr = i_stb1-idnrk
 AND werks = i_stb1-werks.
 SORT i_ekpo BY matnr ASCENDING
 aedat DESCENDING
 ebeln DESCENDING
 ebelp DESCENDING.
 IF NOT i_ekpo IS INITIAL.
 SELECT k~ebeln k~lifnr l~name1
 INTO TABLE i_vend
 FROM ekko AS k INNER JOIN lfa1 AS l
 ON k~lifnr EQ l~lifnr
 FOR ALL ENTRIES IN i_ekpo
 WHERE ebeln = i_ekpo-ebeln.
 SORT i_vend BY ebeln.
 ENDIF.
 ENDIF.
ENDIF.
i_ampl1[] = i_ampl[].
IF NOT i_ampl1[] IS INITIAL.
 SORT i_ampl1 BY ematn.
 DELETE ADJACENT DUPLICATES FROM i_ampl1 COMPARING ematn.
 SELECT matnr mfrpn mfrnr FROM mara INTO TABLE i_mara
 FOR ALL ENTRIES IN i_ampl1
 WHERE matnr = i_ampl1-ematn.
ENDIF.
SORT i_ampl BY bmatn.
IF NOT i_stb[] IS INITIAL.
 SELECT stlty stlnr stlkn stpoz idnrk potx1 potx2
 INTO TABLE i_stpo
 FROM stpo
 FOR ALL ENTRIES IN i_stb
 WHERE stlty = i_stb-stlty
 AND stlnr = i_stb-stlnr
 AND stlkn = i_stb-stlkn
 AND stpoz = i_stb-stpoz
 AND idnrk = i_stb-idnrk.
 SORT i_stpo BY stlty stlnr stlkn stpoz idnrk.
ENDIF.
LOOP AT i_stb INTO wa_stb.
 READ TABLE i_marc INTO wa_marc
 WITH KEY matnr = wa_stb-idnrk
 werks = wa_stb-werks
 BINARY SEARCH.
 IF sy-subrc = 0.
 wa_outtab-beskz = wa_marc-beskz.
 wa_outtab-dzeit = wa_marc-dzeit.
 wa_outtab-webaz = wa_marc-webaz.
 wa_outtab-plifz = wa_marc-plifz.
 wa_outtab-ekgrp = wa_marc-ekgrp.
 ENDIF.
 READ TABLE i_ekpo INTO wa_ekpo
 WITH KEY matnr = wa_stb-idnrk.
 IF sy-subrc = 0.
 wa_outtab-netpr = wa_ekpo-netpr.
 wa_outtab-peinh = wa_ekpo-peinh.
 READ TABLE i_vend INTO wa_vend
 WITH KEY ebeln = wa_ekpo-ebeln
 BINARY SEARCH.
 IF sy-subrc = 0.
 wa_outtab-lifnr = wa_vend-lifnr.
 wa_outtab-name_sup = wa_vend-name1.
 ENDIF.
 ENDIF.
 READ TABLE i_stpo INTO wa_stpo
 WITH KEY stlty = wa_stb-stlty
 stlnr = wa_stb-stlnr
 stlkn = wa_stb-stlkn
 stpoz = wa_stb-stpoz
 idnrk = wa_stb-idnrk
 BINARY SEARCH.
 IF sy-subrc = 0.
 wa_outtab-potx1 = wa_stpo-potx1.
 wa_outtab-potx2 = wa_stpo-potx2.
 ENDIF.
 READ TABLE i_mbew INTO wa_mbew
 WITH KEY
 matnr = wa_stb-idnrk
 bwkey = wa_stb-werks.
 IF sy-subrc IS INITIAL.
 MOVE:
 wa_mbew-verpr TO wa_outtab-verpr,
 wa_mbew-stprs TO wa_outtab-stprs,
 wa_mbew-bwprh TO wa_outtab-bwprh.
 ENDIF.
 wa_outtab-matnr = p_matnr.
 wa_outtab-posnr = wa_stb-posnr.
 wa_outtab-stufe = wa_stb-stufe.
 wa_outtab-idnrk = wa_stb-idnrk.
 wa_outtab-ojtxb = wa_stb-ojtxp.
 wa_outtab-menge = wa_stb-menge.
 wa_outtab-meins = wa_stb-meins.
 MOVE: wa_stb-zzitem_draw_no TO wa_outtab-zzitem_draw_no.
 IF wa_stb-upskz = 'X'.
 SELECT * FROM stpu INTO TABLE i_stpu
 WHERE stlty = wa_stb-stlty AND
 stlnr = wa_stb-stlnr AND
 stlkn = wa_stb-stlkn AND
 stpoz = wa_stb-stpoz.
 ENDIF.
 LOOP AT i_stpu INTO wa_stpu.
 wa_outtab-upmng = wa_stpu-upmng.
 wa_outtab-ebort = wa_stpu-ebort.
 wa_outtab-uposz = wa_stpu-uposz.
 CONCATENATE v_ebort wa_stpu-ebort INTO v_ebort
 SEPARATED BY space.
 ENDLOOP.
 MOVE strlen( v_ebort ) TO v_len.
 MOVE: 0 TO x,
 128 TO y.
 DATA : lt_tab TYPE TABLE OF swastrtab.
 DATA : ls_tab LIKE LINE OF lt_tab.
 DATA : lv_ebort TYPE string.
 CLEAR lv_ebort. CLEAR lt_tab.
 MOVE v_ebort TO lv_ebort.
 CALL FUNCTION 'SWA_STRING_SPLIT'
 EXPORTING
 input_string = lv_ebort
 max_component_length = 128
 TABLES
 string_components = lt_tab
 EXCEPTIONS
 max_component_length_invalid = 1
 OTHERS = 2.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
 IF lt_tab[] IS NOT INITIAL.
 LOOP AT lt_tab INTO ls_tab.
 CLEAR lv_ebort.
 MOVE: ls_tab-str TO lv_ebort.
 CONDENSE lv_ebort.
 MOVE lv_ebort TO wa_outtab-ebort.
 APPEND wa_outtab TO i_outtab.
 CLEAR:
 wa_outtab-matnr,
 wa_outtab-posnr,
 wa_outtab-zzitem_draw_no,
 wa_outtab-ojtxb,
 wa_outtab-menge,
 wa_outtab-meins,
 wa_outtab-uposz,
 wa_outtab-upmng,
 wa_outtab-verpr,
 wa_outtab-stprs,
 wa_outtab-bwprh,
 wa_outtab-lifnr,
 wa_outtab-name_sup,
 wa_outtab-potx1,
 wa_outtab-potx2,
 wa_outtab-netpr,
 wa_outtab-peinh.
* wa_outtab-idnrk.
 ENDLOOP.
 ELSE.
 APPEND wa_outtab TO i_outtab.
 ENDIF.
 CLEAR v_ebort.
 CLEAR: wa_stpu.
 REFRESH: i_stpu.
 LOOP AT i_ampl INTO wa_ampl WHERE bmatn = wa_stb-idnrk.
 READ TABLE i_mara INTO wa_mara WITH TABLE KEY matnr = wa_ampl-ematn.
 IF sy-subrc = 0.
 LOOP AT i_outtab INTO wa_outtab
 WHERE
 idnrk = wa_stb-idnrk AND
 flag NE 'X'.
 wa_outtab-mfrpn = wa_mara-mfrpn.
 wa_outtab-mfrnr = wa_mara-mfrnr.
 SELECT SINGLE name1 FROM lfa1 INTO wa_outtab-name1 WHERE lifnr = wa_mara-mfrnr.
 MOVE 'X' TO wa_outtab-flag.
 MODIFY i_outtab FROM wa_outtab
 TRANSPORTING mfrpn mfrnr name1 flag.
 EXIT.
 ENDLOOP.
 IF sy-subrc <> 0.
 CLEAR:
 wa_outtab-matnr,
 wa_outtab-posnr,
 wa_outtab-zzitem_draw_no,
 wa_outtab-ojtxb,
 wa_outtab-ebort,
* wa_outtab-idnrk,
 wa_outtab-menge,
 wa_outtab-meins,
 wa_outtab-uposz,
 wa_outtab-upmng,
 wa_outtab-verpr,
 wa_outtab-stprs,
 wa_outtab-bwprh,
 wa_outtab-lifnr,
 wa_outtab-name_sup,
 wa_outtab-potx1,
 wa_outtab-potx2,
 wa_outtab-netpr,
 wa_outtab-peinh.
 wa_outtab-mfrpn = wa_mara-mfrpn.
 wa_outtab-mfrnr = wa_mara-mfrnr.
 SELECT SINGLE name1 FROM lfa1 INTO wa_outtab-name1 WHERE lifnr = wa_mara-mfrnr.
 APPEND wa_outtab TO i_outtab.
 ENDIF.
 ENDIF.
 REFRESH i_stpu.
 CLEAR i_stpu.
 ENDLOOP. CLEAR: wa_matnr1, wa_mfrnr, wa_outtab.
ENDLOOP.
Edited by: srinivasareddy j on Mar 9, 2011 7:16 AM
Edited by: srinivasareddy j on Mar 9, 2011 7:20 AM

How to change the selected row color in an alv grid display ?

Hello ,
I WANT TO CHANGE THE COLOR OF THE SELECTED RECORDS IN AN ALV GRID DISPLAY ?
ITS URGENT..
WILL BE REWARDED...

hai Ssnagh Samala
EXicut This report >
Hope It Will Meet U r Requirement.
If Found Helpfull Reward.
REPORT zcuitest_alv_07.
Use of colours in ALV grid (cell, line and column) *
Table
TABLES : mara.
Type
TYPES : BEGIN OF ty_mara,
matnr LIKE mara-matnr,
matkl LIKE mara-matkl,
counter(4) TYPE n,
free_text(15) TYPE c,
color_line(4) TYPE c, " Line color
color_cell TYPE lvc_t_scol, " Cell color
END OF ty_mara.
Structures
DATA : wa_mara TYPE ty_mara,
wa_fieldcat TYPE lvc_s_fcat,
is_layout TYPE lvc_s_layo,
wa_color TYPE lvc_s_scol.
Internal table
DATA : it_mara TYPE STANDARD TABLE OF ty_mara,
it_fieldcat TYPE STANDARD TABLE OF lvc_s_fcat,
it_color TYPE TABLE OF lvc_s_scol.
Variables
DATA : okcode LIKE sy-ucomm,
w_alv_grid TYPE REF TO cl_gui_alv_grid,
w_docking_container TYPE REF TO cl_gui_docking_container.
PARAMETERS : p_column AS CHECKBOX,
p_line AS CHECKBOX,
p_cell AS CHECKBOX.
START-OF-SELECTION.
PERFORM get_data.
END-OF-SELECTION.
PERFORM fill_catalog.
PERFORM fill_layout.
CALL SCREEN 2000.
*& Module status_2000 OUTPUT
text
MODULE status_2000 OUTPUT.
SET PF-STATUS '2000'.
ENDMODULE. " status_2000 OUTPUT
*& Module user_command_2000 INPUT
text
MODULE user_command_2000 INPUT.
DATA : w_okcode LIKE sy-ucomm.
MOVE okcode TO w_okcode.
CLEAR okcode.
CASE w_okcode.
WHEN 'BACK'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " user_command_2000 INPUT
*& Module alv_grid OUTPUT
text
MODULE alv_grid OUTPUT.
IF w_docking_container IS INITIAL.
PERFORM create_objects.
PERFORM display_alv_grid.
ENDIF.
ENDMODULE. " alv_grid OUTPUT
*& Form create_objects
text
--> p1 text
<-- p2 text
FORM create_objects.
Ratio must be included in http://5..95
CREATE OBJECT w_docking_container
EXPORTING
ratio = 95
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
others = 6.
CREATE OBJECT w_alv_grid
EXPORTING
i_parent = w_docking_container.
ENDFORM. " create_objects
*& Form display_alv_grid
text
--> p1 text
<-- p2 text
FORM display_alv_grid.
CALL METHOD w_alv_grid->set_table_for_first_display
EXPORTING
is_layout = is_layout
CHANGING
it_outtab = it_mara
it_fieldcatalog = it_fieldcat
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
ENDFORM. " display_alv_grid
*& Form get_data
text
--> p1 text
<-- p2 text
FORM get_data.
SELECT * FROM mara UP TO 5 ROWS.
CLEAR : wa_mara-color_line, wa_mara-color_cell.
MOVE-CORRESPONDING mara TO wa_mara.
ADD 1 TO wa_mara-counter.
MOVE 'Blabla' TO wa_mara-free_text.
IF wa_mara-counter = '0002'
AND p_line = 'X'.
Color line
MOVE 'C410' TO wa_mara-color_line.
ELSEIF wa_mara-counter = '0004'
AND p_cell = 'X'.
Color cell
MOVE 'FREE_TEXT' TO wa_color-fname.
MOVE '5' TO wa_color-color-col.
MOVE '1' TO wa_color-color-int.
MOVE '1' TO wa_color-color-inv.
APPEND wa_color TO it_color.
wa_mara-color_cell] = it_color[.
ENDIF.
APPEND wa_mara TO it_mara.
ENDSELECT.
ENDFORM. " get_data
*& Form fill_catalog
text
--> p1 text
<-- p2 text
FORM fill_catalog.
Colour code : *
Colour is a 4-char field where : *
- 1st char = C (color property) *
- 2nd char = color code (from 0 to 7) *
0 = background color *
1 = blue *
2 = gray *
3 = yellow *
4 = blue/gray *
5 = green *
6 = red *
7 = orange *
- 3rd char = intensified (0=off, 1=on) *
- 4th char = inverse display (0=off, 1=on) *
Colour overwriting priority : *
1. Line *
2. Cell *
3. Column *
DATA : w_position TYPE i VALUE '1'.
CLEAR wa_fieldcat.
MOVE w_position TO wa_fieldcat-col_pos.
MOVE 'MATNR' TO wa_fieldcat-fieldname.
MOVE 'MARA' TO wa_fieldcat-ref_table.
MOVE 'MATNR' TO wa_fieldcat-ref_field.
APPEND wa_fieldcat TO it_fieldcat.
ADD 1 TO w_position.
CLEAR wa_fieldcat.
MOVE w_position TO wa_fieldcat-col_pos.
MOVE 'MATKL' TO wa_fieldcat-fieldname.
MOVE 'MARA' TO wa_fieldcat-ref_table.
MOVE 'MATKL' TO wa_fieldcat-ref_field.
Color column
IF p_column = 'X'.
MOVE 'C610' TO wa_fieldcat-emphasize.
ENDIF.
APPEND wa_fieldcat TO it_fieldcat.
ADD 1 TO w_position.
CLEAR wa_fieldcat.
MOVE w_position TO wa_fieldcat-col_pos.
MOVE 'COUNTER' TO wa_fieldcat-fieldname.
MOVE 'N' TO wa_fieldcat-inttype.
MOVE '4' TO wa_fieldcat-intlen.
MOVE 'Counter' TO wa_fieldcat-coltext.
APPEND wa_fieldcat TO it_fieldcat.
ADD 1 TO w_position.
CLEAR wa_fieldcat.
MOVE w_position TO wa_fieldcat-col_pos.
MOVE 'FREE_TEXT' TO wa_fieldcat-fieldname.
MOVE 'C' TO wa_fieldcat-inttype.
MOVE '20' TO wa_fieldcat-intlen.
MOVE 'Text' TO wa_fieldcat-coltext.
APPEND wa_fieldcat TO it_fieldcat.
ENDFORM. " fill_catalog
*& Form fill_layout
text
--> p1 text
<-- p2 text
FORM fill_layout.
Field that identify color line in internal table
MOVE 'COLOR_LINE' TO is_layout-info_fname.
Field that identify cell color in inetrnal table
MOVE 'COLOR_CELL' TO is_layout-ctab_fname.
ENDFORM. " fill_layout
Regards.
Eshwar.

How to merge rows with similar values in alv grid display in webdynpro

Hi experts,
i want to know about how to merge rows with similar values in alv grid display of webdynpro.grouping rows is possible in table display in webdynpro but i am not able to do row grouping in the alv grid display in webdynpro.
kindly suggest.
thanks ,
Anita.

Hi Anita,
did you find a solution for this? I have opened a Thread, if you know the answer maybe you could help me out:
Is there an ALV function similar to the TABLE Row grouping?
Thanx in advanced!!!
Kind Regards,
Gerardo J

How to set only one row selection in ALV GRID DISPLAY

How to set single row selection in grid display
not multiselection.

Hi,
In the USER COMMAND, build the code to check the REFRESHED Data & then check the number of records with SEL = 'X'.
If more than single entry found, then raise an error message.
Best regards,
Prashant

ALV GRID DISPLAY USING FACTORY METHODS

Hi all
I am using factory methods for my alv grid display.
I have a list of functionalities, for which i am not able to find a correct method..
1) Header of alv(with all the values of the selection-screen)
2)How to give text to a subtotal(ed) column, i.e. if i subtotal a qty field against a sorted field, i want to display ==> Nett Wt. = 123.00 (for first header entry) and so on for each header entry.
3)how to remove the zeroes from a quantity field?
4) Displaying the cells as blanks where data is 0( for quantity fields if i have a cell with zero value, it should be blank.)
5) double click on a cell to open a transaction with the cell's value.
Any help on this would be appreciated.
Points will be rewarded for sure...
Thanks & Regards
Ravish Garg

Hello Ravish
Regarding the display of zero values as empty cells have a look at my modified sample report ZUS_SDN_CL_SALV_TABLE_INTERACT.
*& Report ZUS_SDN_CL_SALV_TABLE_INTERACT
REPORT zus_sdn_cl_salv_table_interact.
TYPE-POOLS: abap.
DATA:
gt_knb1 TYPE STANDARD TABLE OF knb1.
DATA:
go_table TYPE REF TO cl_salv_table,
go_events TYPE REF TO cl_salv_events_table.
* CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
 CLASS-METHODS:
 handle_double_click FOR EVENT
 if_salv_events_actions_table~double_click
 OF cl_salv_events_table
 IMPORTING
 row
 column.
ENDCLASS. "lcl_eventhandler DEFINITION
* CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_double_click.
* define local data
 DATA:
 lo_table TYPE REF TO cl_salv_table,
 lt_orders TYPE STANDARD TABLE OF bapiorders,
 ls_knb1 TYPE knb1.
 READ TABLE gt_knb1 INTO ls_knb1 INDEX row.
 IF ( syst-subrc = 0 ).
 CALL FUNCTION 'BAPI_SALESORDER_GETLIST'
 EXPORTING
 customer_number = ls_knb1-kunnr
 sales_organization = '1000'
* MATERIAL =
* DOCUMENT_DATE =
* DOCUMENT_DATE_TO =
* PURCHASE_ORDER =
* TRANSACTION_GROUP = 0
* PURCHASE_ORDER_NUMBER =
* IMPORTING
* RETURN =
 TABLES
 sales_orders = lt_orders.
* Create ALV grid instance
 TRY.
 CALL METHOD cl_salv_table=>factory
* EXPORTING
* LIST_DISPLAY = IF_SALV_C_BOOL_SAP=>FALSE
* R_CONTAINER =
* CONTAINER_NAME =
 IMPORTING
 r_salv_table = lo_table
 CHANGING
 t_table = lt_orders.
 CATCH cx_salv_msg .
 ENDTRY.
 lo_table->display( ).
** SET PARAMETER ID 'BUK' FIELD ls_knb1-bukrs.
** SET PARAMETER ID 'KUN' FIELD ls_knb1-kunnr.
** CALL TRANSACTION 'XD03' AND SKIP FIRST SCREEN.
 ENDIF.
ENDMETHOD. "handle_double_click
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT * FROM knb1 INTO TABLE gt_knb1
 WHERE bukrs = '1000'.
* Create ALV grid instance
TRY.
 CALL METHOD cl_salv_table=>factory
* EXPORTING
* LIST_DISPLAY = IF_SALV_C_BOOL_SAP=>FALSE
* R_CONTAINER =
* CONTAINER_NAME =
 IMPORTING
 r_salv_table = go_table
 CHANGING
 t_table = gt_knb1.
 CATCH cx_salv_msg .
ENDTRY.
* Create event instance
go_events = go_table->get_event( ).
* Set event handler
SET HANDLER:
 lcl_eventhandler=>handle_double_click FOR go_events.
PERFORM modify_columns.
go_table->display( ).
END-OF-SELECTION.
*& Form MODIFY_COLUMNS
* text
* --> p1 text
* <-- p2 text
FORM modify_columns .
* define local data
DATA:
 lt_dfies TYPE ddfields,
 ls_dfies TYPE dfies,
 lo_typedescr TYPE REF TO cl_abap_typedescr,
 lo_strucdescr TYPE REF TO cl_abap_structdescr,
 lo_tabledescr TYPE REF TO cl_abap_tabledescr,
 lo_columns TYPE REF TO cl_salv_columns_table,
 lo_column TYPE REF TO cl_salv_column.
lo_columns = go_table->get_columns( ).
lo_typedescr = cl_abap_typedescr=>describe_by_data( gt_knb1 ).
lo_tabledescr ?= lo_typedescr.
lo_strucdescr ?= lo_tabledescr->get_table_line_type( ).
lt_dfies = lo_strucdescr->get_ddic_field_list( ).
LOOP AT lt_dfies INTO ls_dfies.
 lo_column = lo_columns->get_column( ls_dfies-fieldname ).
 IF ( ls_dfies-keyflag = abap_true ).
 CONTINUE.
 ELSEIF ( ls_dfies-fieldname = 'WEBTR' ). " Bill of ex. limit
 lo_column->set_zero( if_salv_c_bool_sap=>true ). " display zero
 lo_column->set_zero( if_salv_c_bool_sap=>false ). " hide zero
 ELSE.
 lo_column->set_technical( if_salv_c_bool_sap=>true ). " hide col
 ENDIF.
ENDLOOP.
ENDFORM. " MODIFY_COLUMNS
Regards
Uwe

Recall ALV grid display

Hi,
 I used ALV grid display to generate a report, the end-user will select a record from the report and press a push button so that the value will be changed automatically and will be reflected in the alv.
 I have done this by recalling the alv function module. The problem is when alv FM is recalled the changed data is displayed in a new screen and when i select to GO BACK by pressing [ F3 ] im getting the old alv display screen, but i want the controll to go to the selection screen. Please help me to fix this,
Points will be awarded for helpful replies,
Regds,
Sarath.C

refer to this sample - I ve just written and is working -
*& Report ZSKC_TEST4
REPORT ZSKC_TEST4.
TYPE-POOLS : SLIS.
DATA : ITAB LIKE T100 OCCURS 0 WITH HEADER LINE.
DATA : G_REPID TYPE SY-REPID.
START-OF-SELECTION.
SELECT * UP TO 10 ROWS
FROM T100
INTO TABLE ITAB
WHERE SPRSL = SY-LANGU.
CHECK SY-SUBRC EQ 0.
G_REPID = SY-REPID.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
 I_CALLBACK_PROGRAM = G_REPID
 I_CALLBACK_PF_STATUS_SET = 'SUB_PF_STAT'
 I_CALLBACK_USER_COMMAND = 'SUB_USER_CMD'
 I_STRUCTURE_NAME = 'T100'
TABLES
 T_OUTTAB = ITAB[]
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2
IF SY-SUBRC <> 0.
ENDIF.
FORM SUB_USER_CMD USING r_ucomm LIKE sy-ucomm
 rs_selfield TYPE slis_selfield.
CHECK R_UCOMM EQ 'PROC'.
*Insert 2 blank lines.
append itab.
append itab.
RS_SELFIELD-REFRESH = 'X'.
ENDFORM.
FORM SUB_PF_STAT USING rt_extab TYPE slis_t_extab.
* Copy from a Standard Prog - SAPLKKBL - STANDARD_FULLSCREEEN.
* USe SE80 and right click on the PF-STAT and copy.
SET PF-STATUS 'PF_ALV'.
ENDFORM.

Blank Row in ALV Grid Display

Similar Messages

Maybe you are looking for