Blinking Buttons
Under the Sports/Interest tab, there are two new buttons. When I click on it, it does not work and when I move my mouse around it, it starts "blinking" how do we solve this?
1. fix your code
2. make sure you over animation does not trigger an out event.
Similar Messages
-
How can i change the color of a blinking button?
Dear all,
how can i change the color of a blinking button with property nodes, when the button changes from "normal" state to blinking state? I can change the color of the normal state, but how can I change the color when the button is in blinking state?
thanksjus an example
Ian F
Since LabVIEW 5.1... 7.1.1... 2009, 2010
依恩与LabVIEW
LVVILIB.blogspot.com
Attachments:
Blinking_Indicator_2003.vi 27 KB -
Thread to synchronize blinking buttons
I have a infinite loop that test which button should blink. Only one button should blink per time.
//this blink the buttons
int delay = 700; // milliseconds (or 0.7 sec)
ActionListener taskPerformer = new ActionListener() {
public void actionPerformed(ActionEvent evt) {
//...Perform a task...
auxButton.setVisible(false);
Timer timer = new Timer(500, new ActionListener() {
public void actionPerformed(ActionEvent evt) {
//...Perform a task...
auxButton.setVisible(true);
timer.setRepeats(false); // This means it will only happen once!
timer.start();
//infinite loop
while(true)
if(vetor_game[i] == BLUE)
//blink the blue button
auxButton=blue;
Timer timer = new Timer(delay, taskPerformer);
timer.setRepeats(false);
timer.start();
else if(vetor_game[i] == RED)
//blink the red button
auxButton=red;
Timer timer = new Timer(delay, taskPerformer);
timer.setRepeats(false); nce!
timer.start();
else if (yellow).......
else if (green) .........and so on....
Many times, when auxButton = blue, for example, the loop carry on and auxButton = red before the taskPerformer with the blue button finishes. I need that the taskPerformer finishes before some new button acess it.I have no idea what it is you actually want to accomplish. Maybe this will helpimport java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class Test3 extends JFrame implements Runnable {
JButton[] jbs = new JButton[20];
public Test3() {
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
Container content = getContentPane();
content.setLayout(new FlowLayout());
for (int i=0; i<jbs.length; i++) {
content.add(jbs[i] = new JButton("B-"+i));
new Thread(this).start();
setSize(300,300);
setVisible(true);
public void run() {
int i=0;
while (true) {
jbs.setBackground(Color.lightGray);
i++;
if (i>=jbs.length) i=0;
jbs[i].setBackground(Color.pink);
try { Thread.sleep(1000); } catch (Exception e) {}
public static void main(String[] args) { new Test3(); } -
I have been using the button feature in Captivate 3 to insert
navigation buttons.
The buttons are being inserted on the bottom of the slide;
however, whenever the tutorial progresses to the next slide, the
buttons "blink/flash". These buttons are consistent througout the
entire tutorial so everytime the slide changes, the buttons
blink/flash.
Does anyone know of a way to stop this from occuring? I have
Adobe Captivate 4 on order so if there is a fix for this in that
version, could someone let me know?
Thanks!I don't have Captivate 3, but here's a couple of things I'd
check in Captivate 4:
1) On the button Options tab, make sure that the buttons are
set to Appear after "0:00" and Display for "rest of slide"
2) If you're publishing with Action Script 2 (AS2), try using
AS3. I had a similar issue with some layered images, which flowed
flawlessly in the Preview but flashed between slides in the
published output. Switching to AS3 corrected it for me, so it may
be worth a shot for your buttons.
If neither of those help, then... um... I don't know
:) -
I am building a calculator simulator in Flash CS3 using
Action Script 3. I would like to demonstrate how to solve a problem
by "blinking" the correct button sequence on the calculator. I can
"blink" one button now by adjusting the alpha setting of a
rectangle symbol over any key. I did this by creating a new timer
set for 1000 ms and creating a listener for the TICK event.
I adjust the alpha setting, start the timer, wait for the
Tick and adjust the alpha again. This works fine for one button.
However, I need to blink a sequence of buttons at one-second
intervals to demonstrate how to solve a complete problem.
I'm having trouble coming up with the right steps to blink a
sequence of buttons at one-second intervals. Can anyone explain the
right way to do this? Thank you for any help.Hi Steve
I think Lilybiri may be somewhat busy today as I've not seen any posts from her. So hopefully she won't mind my offering to help.
She meant to insert images of the buttons you want to be disabled. Just place images there. They will look like buttons but won't be clickable until you want them to be.
You will use the ability to hide and show the images as well as the buttons. This is tied to Advanced Actions. Captivate help does offer a section that talks about Advanced Actions and I also offer a eBook on them for a reasonable price at the link below. I think it might be helpful for you but I'm not here to SPAM you. I'm only trying to offer help.
In a nutshell you would insert all the buttons and images. Configure most of the buttons as hidden and most of the images as visible. Then you will create an advanced action for each button that will hide the image of the button, show the next live button, then visit the section you want. When you return to the slide the next button should be visible and clickable.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
Blinking Buttons DVD won't work in DVD player
I have been trying to burn a DVD multiple times. I have made hundreds of DVD's with DVD studio pro, and have never seen this problem before. When The DVD is done, when I put it in a DVD player, the button on the menu is blinking like crazy and it is impossible to select or activate it. I've tried remaking the project file and every dvd I make has this same issue. What is going on? Please help.
I saw this on my first DVDSP project many years ago, and it is indeed a combination of the duration, loop point, and timeout/end jump. I believe it was a duration of 0 on a motion menu, with the menu set to loop. Just double-check the menu properties in the inspector.
-
I have click to continue (image) button on every slide of my project. Using an effect, it fades in with a few seconds left on each slide, and is set to display for the rest of the project. The problem is that it "blinks" one time a second or two after it starts to fade in, and I think at the exact time it is supposed to pause the project.
Can anyone help me with this issue? I am using Captivate 7. Thank you!Try putting a solid shape in the background that has an alpha value of 0. That way the controls_btn won't have any holes in it.
-
Hello, I have this assignment dealing with making a JButton one color for a half a second then another color for another half a second. What I mean is that when the button is clicked it should start blinking back and forth between these two colors until the user closes the window. By the way the problem is dealing with a clock. I know that I need to use an instance of the Timer class but I'm having trouble figuring out how to do this without making the color change permanently. The following is what I have so far after erasing some things after they did not work. I am aware that in this code I have only set the button's color once.
int delay = 1000;
Timer timer = new Timer(delay, this);
JButton btn = new JButton("Get Time");
btn.addActionListener(this);...
public void actionPerformed(ActionEvent e) {
timer.start();
btn.setBackground(Color.white);
btn.setForeground(Color.black);
clock.setCurrentTime();
repaint();
messagePanel.setMessage(clock.getHour() + ":" +
String.format("%02d", clock.getMinute()) +
":" + String.format("%02d", clock.getSecond()));
messagePanel.repaint();
}HI,
In my opinion you have to use another thread for changing the color of JButton.
This example shows how to create blinking JLabel, with JButton it will be nearly the same.
http://www.acsu.buffalo.edu/~kpcleary/Project.java
L.P. -
Palm Treo 755p Buttons Flashing
I just received a Palm Treo 755p from a reputable seller on ebay.It was brand new, still in the plastic and everyuthing. As soon as a put the battery in the screen is white and all the buttons are flashing. I have had it charging for almost 3 hours now and it wont do anything but that. I tried the hard reset and it wont even take me to the option to erase all info, Just blinking buttons. I called the people I bought it from and they said it just needs to be charged for 12 hours the first time. The phone came in a Palm box, not a box from my carrier. Does this sound accurate and if not, is there anything I can do?
Post relates to: Treo 755p (Verizon)Hello brykass08 and welcome to the Palm forums.
My Treo 700p and 755p, regardless of who I purchased them from, all came in Sprint retail packaging. One thing to check is to see if there are any Palm hologram logos on the battery. You may not have a Palm OEM battery. I would also pull the battery out of the device, connect the charger, and then try to power up the devcice.
In any case, this sounds like a hardware problem to me.
Alan G -
Blinking recording light... Please help!
Hey guys - I can't seem to record in logic because the record button is flashing and I don't know why. This just started. How to I get it to go solid so I can record? Thanks!!!
Btw, I am only using an Edriol for input through FireWire. Never had any problems until now.The button that is blinking or flashing is on the far left hand side at the bottom for the individual track that I have selected for recording.
OK, thanks for explaining. I understand now. You're looking at the Inspector, which contains two channel strips, and at the bottom of the left channel strip is a record button. It's normal for that button to flash when this track is record-enabled.
The visual behavior is a little confusing, or inconsistent, because this is essentially the same record button that appears in the track header, but that one glows steady and this one flashes (along with the same button that appears in the Mixer).
Now, with the button blinking, we hear nothing until it is actually recording.
I don't think the blinking button is an issue. I think it's always been that way, and you just never noticed. But I think something did change in the way your monitoring is set up.
"Hear nothing until it is actually recording" would be normal if you have Autopunch turned on, but you say that's not turned on. So this is a puzzle. Here's something you can do. Find this file:
Macintosh HD/Users/YourUserName/Library/Preferences/com.apple.logic.pro.plist
Move it to the desktop. Quit Logic. Relaunch Logic. Logic will be set to Built-in Audio. Try recording that way (using your built-in Mac mic) and see what happens. Then switch to your audio interface and see what happens.
Also it might help to know more about your setup. What OS? What version of Logic? What model audio interface? And you are monitoring how? Speakers connected to the audio interface? -
Why call between WebClient agents fails?
Hi,
I have just recently installed the mySAP CRM 4.0 IC WebClient (CRM40 SP00).
I have been testing the installation with CCS (Contact Center Simulator) and for a basic CCS supported tests (Inbound Phone call, Outbound Phone call, Chat) everything seems to be ok, but a call between WebClient agents fails due to an java error. The Phone Call between WebClients which should work according the CCS webpage.
What should I do to get WebClient agents to call each others? Any configuration or customization tips? Note that I do not have CC integration in place, just the IC WebClients.
Here is the test done in details and the error reported by WebClient:
0) I restarted SAP CRM to be sure no pending sessions exists
1) Open the CCS to see that no agents are logged in with WebClient
2) Login as java_ic with WebClient
3) CCS shows java_ic Workmode (=status) as 'Not Ready'
4) Switch java_ic to ready by from the WebClient
5) CCS shows java_ic Workmode (=status) as 'Ready'
Then I do the same for agent 'sap*' with another MSIE browser window. At this point, the CCS shows Workmode for both agents as 'Ready' and I have two WebClient browsers opened. I also verify that both has Phone selected from the channel selector in the WebClient.
6) With java_ic agent, I press the Dial Pad, enter the sap* agent phone
number (Phone: +15550002; shown in the CCS for both agents logged in) and then I press the Dial button on Dial Pad to call to +15550002.
6.1) After pressing the Dial button, the WebClient displays a pop-up in
the middle of the screen with info: "Your request is being processed." After this there is an Info message under the buttons in the WebClient for java_ic saying: "No account information found".
7) Java_ic WebClient shows that it's doing an outbound call and is 'Dialing' state.
8) sap* WebClient window has blinking button with labels 'Accept' and 'Reject'. So, it clearly got an notification of the Inbound Phone call coming from java_ic. But there is also an error message under the buttons in the same WebClient webbrowser screen (not in the JavaConsole, not in separate alert message this time) for sap*:
"Java error: type= APPLICATION ERROR, ID= GETIAD_FAILED, description=".
9) With sap* WebClient I cannot answer or reject the call. Nothing happens. The browser Status Bar says: javascript:void(0) when I press the Accept button.
10) At this situation, the CCS shows that the agents's sap* Workmode is
switched from the previous 'Ready' state to 'Not Ready' automatically (while the sap* WebClient status is still in Ready). So, the sap* automatically, due to the error, changed the status to 'Not Ready'.
11) java_ic remain on 'Dialing' status for all the time trying to get connected with sap*.
I got informed that the call between WebClient COULD BE seen as a "call transfer" between clients by the CRM system. This might be something to do with the problem in calling between WebClients.
Because the java_ic reports: "No account information found" when placing the Outbound Phone call, one could assume that account details should be passed along with the call transfer. Possibly sap* cannot receive the
inbound phone call due to a missing account information thus reporting java error: "Java error: type= APPLICATION ERROR, ID= GETIAD_FAILED, description=".
Best Regards,
Jani[loaded] com.genieo.completer.download.plist Adware! [Remove]
[loaded] com.genieo.completer.ltvbit.plist [Support]
[running] com.genieo.completer.update.plist Adware! [Remove]
[not loaded] com.macpaw.CleanMyMac.helperTool.plist [Support]
[not loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist [Support]
[not loaded] com.macpaw.CleanMyMac.volumeWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.diskSpaceWatcher.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist [Support]
[loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist [Support]
Your machine is slow because you loaded a bunch of third party junk on it. -
Embedding code behind a site created in muse to trigger a desired effect
I built another great site using Muse but the client wants to use a third party processing application that requires I:
1.) embed script (not a url) in the body section of the html (not the head),
Instead of placing the code in the <body><body> section (which I do not know how to access in muse), I tried placing the code in the head section available via the "Page Properties" metadata field -- and it does work. However. now I need to create a custom button to trigger this effect.
2.) I want to use a custom button but the client wants the button to blink between to colors. The third party vendor provided a code that would trigger the action of the first code but I need to find a way to make this all work.
First, I created the blinking effect by using a blank slideshow and placed a .png version of a button I created in ai in the fist position followed by a button also created in .png with the alternate color on top. I Then set the "Fade" speed to the minimum of .06 seconds. This method did provide the desired effect, but now how do I make it clickable?
I tried using the "Rectangle Tool" to place an empty, sans stroke div over the blinking button that I created with the idea that I would copy the designated action code into the html by way of the "Object" > "Insert HTML" but instead of placing the code behind the empty rectangle div, it creates it's own link with a "?" mark image. As a test I placed the unwanted "?" on top of the blinking button and previewed the page in the browser and it works causing the intended trigger effect when clicked. Also note that placing the element over the rotating slideshow did not obstruct the blinking effect.
The only problem is that I don't want to show this "?" that the "Insert HTML" path created, I need to show the blinking "Order Now" button that the client asked for.
Can anyone help?Hi,
take a look o this thread, Can I use a php script in muse?
if you still have any question, please let us know -
Trouble with SF 300-24P 24-Port 10/100 PoE
Good day.
I connect to switch Access Point, configure port on switch which vlan work on this port. But after reboot AP my config for this port delete and have other config where vlan 1 untagged, and allow all other vlan. But in my cinfig allow 3vlan: untagged 100, and tagged 113, 999.
How to solve this problem?hi Igor, you need to save the running config to the start up config, otherwise a reboot will drop any changes made to the switch.
When you make a change to the switch, on the top right of your browser there is a blinking button to save, click this and save the run config to start up.
-Tom
Please mark answered for helpful posts -
I have bought lightroom 5 as a box version. Now I ordered Creative Cloud. In application manager I see lightroom 5 is up-to-date. I also see my purchased license number in lightroom. How will this lightroom version be updated / upgraded to Lightroom CC?
There is no magic involved nor is there any specific CC version of LR. CC simply will take over your existing install and that's it. No change in functionality no nothing, no blinking buttons, no congratulary note from aunt Gerty.
Mylenium -
Multiple events structures for same control
Hi,
I would like to use a same blinking button into 2 event structures seperately.
Please see my VI, after the first event is done, the second event is not wait for user to press the button, and it is auto triggered.
How to solve that? Is there any way to reset the event?
Thanks.
Attachments:
2 events.vi 13 KBIt is also not clear what you are trying to do with the blinking. In your code, the LED will blink basically always. (you don't use the timeout event).
In the first frame, blinking is enabled. Nothing happens in the second frame until the start event occurs. At this time blinking gets disable for about a nanosecond and gets immediately enabled again in the third frame. Even if the second eveng would not execute, you'll never see a difference. So what's the point?
Here's a quick draft where each press of the start button toggles between blinking and not blinking. Maybe it can give you some ideas.
LabVIEW Champion . Do more with less code and in less time .
Attachments:
2 eventsMOD.vi 10 KB
Maybe you are looking for
-
How do I sign a document on Adobe Reader?
I have version 11.0.04 and when I click on a box to sign on the PDF, the sign menu is all gray, so I am unable to sign my name on this. I've been looking online and either it's a different version or my program won't allow me how to sign it. Help!!!
-
Automating PDF Generation with Server-Side Acrobat - Benefit, Risks, Suggestions?
Looking for some clarity... How feasible is it to automate PDF creation from Excel using Acrobat, as opposed to some third-party tool? The SDK seems out of date. Any issues programming with .NET? Are there better products out there, from third-part
-
Recent Files List in Dreamweaver CS5.5
Recently opened files are not being stored in the recent file list (File --> Open Recent) on my installation of Dreamweaver. Is there a setting I can enable to turn this on? Thank you.
-
How to - Extract data from Cloud For Customer into SAP HANA system
Hello Community, I have a requirement for extracting the existing data from Cloud for Customer into separate SAP HANA Box. Is it possible to achieve the same ? If yes, Please guide me for the same. Awaiting quick response. Regards Kumar
-
Can't execute PSE 10 today...giving me a runtime error and shuts down.
I have been using this program successfully for sometime but today program won't open because of a runtime error. I have read some of the posts but they are too complicated for me to understand. I need a clear answer on how to resolve this.