Blocking material creation
I have ea requirement wherein I must block the material creation (transaction mm01) daily when my program runs.
How do I achieve this?
Thanks.
You could use BDC to achieve this. The quicker solution is to change the corresponding entry in table TSTC: set field CINFO to "20" to lock the transaction.
Regards,
John.
Similar Messages
-
Blocking the Creation of PO in Service Order
Hello SAP folks,
I have got an issue where I have to block the Creation of Purchase Requisation Number(BANFN) which is generated in the background after the creation of the Service order(IW31) I have tried the user exit EXIT_SAPLCOIH_009 but while coding i could'nt trace the field which is holding the value of PR number.Please let me know is it possible to stop the creation of PR if Yes, Please guide me in this issue in terms of coding.
Thanxs in advance.
Regards,
IndiraHi Indira,
Try these User Exits.
CNEX0013 Order: Cust. enhancement: Default item category comp. a
CNEX0026 Customer enhancement for general inspection of material
CNEX0027 Customer enhancement: Plant, storage loc. finding for c
IWO10004 Maintenance order: Customer check for order completion
IWO10005 Maintenance order: Cust.-specif. determination of profi
IWO10006 Maint. order: Fcode exclusion through cust. enhancement
IWO10007 Maint.order: Customer enhancement - permits in the orde
IWO10008 Cust. enhancement: Determination of tax jurisdiction co
IWO10009 PM Order: Customer Check for 'Save' Event
IWO10010 Maint. order: Cust. enhancement for determining WBS ele
IWO10011 Maint. order: Customer enhancement for component select
IWO10015 Maintenance order: F4 Help for user fields on operation
IWO10016 PM Order: Cust. enhancement to check operation user fie
IWO10017 Determine external order number by customer logic
IWO10018 Maintenance order: User fields on order header
IWO10020 Maintenance order: Automatically include task list
IWO10021 Automatic task list transfer when creating order from n
IWO10022 Determine calendar from user exit
IWO10023 Service order: Change header data for advance shipment
IWO10024 Service order: Changes to items for advance shipment
IWO10025 PM/SM order: Finding responsible cost center
IWO10029 Inclusion of bill of material in PM/SM order
IWO10030 Preset Fields for Event Object
IWO10031 Hide personnel number in PM/SM order
IWO10033 Customer-Specific Authorization Check Maint./Service Or
IWO10034 Operation status based on the status of capacity reqs
Regards,
Vijay -
Block the creation of planned order
Dear experts
How can I control the creation of planned order? I want to block the creation of planned order if the BOM or routing is not exist.
BRsHi,
I think this can be done using 'Material status' try the following and let me know if it works.
Create a new material status in transaction OMS4 (like R1 - "Created but BOM and Routing not maintained" )and in the details screen select Option "B" for MRP messages.
You designate a material as a "R1 -Created but BOM and Routing not maintained" In the master record.
MRP "B" = warning
Please try this and let me know the result.
Regards,
Prakash -
Block material for Sales Area & Customer.
Hi.
I want to block material for particular Sales area.
For that i used "X-distr.chain status" &" DChain-spec. status" in Saleas Org1 Tab of material Master.
Now in Sales Order Creation i am getiing Warning message as
"Material 95343431321 has status:Discontd w/o Replace"
Message No V1028
How to Convert this warning to error so that it wont allow to Save Sales order?
Also i want to Block material for Particular Customer How to achieve that???Any other better option than Material Exclusion???
Reg.
AmolHi
1.KIndly go to the below path
SPRO-IMG-Logistics generalmaterial mastersettings for key fields Dat relevant for Sales and distribution-Define sales stauses-select the disct status ,details and maintin as "B" in Block for order then system will give error message at the time of sales order
2.Better option is through material exclusion onle
Regards
Damu
S -
Want to block Material component in PO.
Dear all,
We set material status block for external procurement.And it working fine.It cannot allow to create Purchase Order with blocked material.
But the problem is that system allow to create Subcontracting Purchase Order when we use this block material as a Component.
How we can stop it.
Thanks & Regards
Dipayan BoseI dont see any standard way of doing it as i dont see any setting which can block material for reservation creation ,
Method suggested by Amrinda controls entry of component in BOM so it might work if u r strictly going to use process via BOM.
But as i have observed that is rarely the case.
I would recommend you to ask ur technical consultant to identify EXIT/BADI/Enhancement which cud check creation of such PO or creation of reservation via subcontracting order.
regards
Avinash Goswami -
How to block the creation of a Sales Orders without a linked Purchase Order
Hi. I'm trying to block the creation of a Sales Order that doesn't have a linked Purchase Order. The first thing I did is using the SBO Transaction Notification as follows:
IF @transaction_type = 'A' AND @object_type='17'
BEGIN
IF (SELECT PoPrss FROM ORDR WHERE DocEntry = @list_of_cols_val_tab_del) = 'N'
BEGIN
SET @error = 1
SET @error_message = 'Purchase Order Missing...'
END
END
This works good. I create the Sales Order, I tick the purchase order field on the logistics tab, I click Add, and then the purchase order window appears...
Then, the problem begins... If I click the Cancel button, the purchase order is obviously not created, but the Sales Order is created.
Can someone tell me how to block the creation of the sales order If the user press the cancel button on the purchase order window (and the purchase order is not created)
As far as I can see, after clicking the add button in the sales order document, the Sales Order is created on the DB. If there's no way of blocking the creation of the Sales Order, can I avoid closing the purchase order window by the SBO_TransactionNotification? (if the purchase order has not been created)
Thanks...Hi Yail,
I think you can't close the purchase order with the stored procedure.
Try to catch the Event when the user click on Cancel button.
So you can list the vents with event logger : https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ede3be37-0e01-0010-1883-cd1b5293473e
You can block the cancel button and force the user to create the purchase order.
Hope i help you
Best regards
Michael -
Block cash sales with credit limit blocking from creation of outbound
Hello everyone,
Can you please teach me how to block cash sales with credit limit blocking from creation of outbound delivery? Currently, outbound delivery can not be created only for charge sales with credit limit block. Problem is, we can not confirm the cash sales. We have to delete first the outbound then unblock the S.O. before creating a new Outbound.
Thanks in advance.
RidgyCash sale transaction will not have credit limit block, as the transaction is based on receipt of immediate payment. But if you still want to try the same, configure a 'Z' transaction Type for cash sale (Copy of Cash Sale - Sales Order Type) and maintain Credit check field as 'D' and try the scenario.
Ideally there should not be a Credir Check foe a Cash Sale Scenario.
Regards,
Rajesh Banka -
Material creation process in SRM-MDM
Dear All,
I am new to SRM. Please correct me about material creation procedure in SRM if I am wrong:
Normally in classic/extended classic scenario, material first created in MM and then it replicated to SRM. Base on configuration setting for number range, system either create the product ID same as material number number in SRM when it replicated into SRM. In final steps, the product information will upload into MDM either XI integration or manually via excel upload.
My question:
+ Is it possible to automatic create product without XI via T.Code - MDMGX in MDM.
+ If the replicated product ID of SRM is different then MM material number, which number we should consider for creating product
MDM.
Thanks in advance.
BR
JenniferHi Jennifer,
Answer1) You can only replicate Product Groups, Currencies and Unit of Measures through t-code MDMGX. XI/PI is required for Contract and Product Catalogs.
Answer 2) If the replicated product ID of SRM is different then MM material number, you should enter MM material number and in External Web Service Configuration for that internal catalog, uncheck "Do not check Product" indicator so that SRM will not check the Product ID and when item goes to backend system, it will have correct MM material number.
Thanks,
Anshuk Saxena -
How to block material issuing after sales order invoiced?
As the subject mentioned, could be a possible to block material issuing since sales order invoiced, or
in the another words, after the sales order completed?
Or could be a possible to set sales order as closed, and then material issuing related with this sales order are
forbidden?
Thanks in advanced,
Zhou ZhenDear Friend
A sales order is created say order no 10000 and for material X say 10 units this order is delivered and PGIed and invoiced and the payment too has come
That means the order 10000 is closed
Case 1
Now an user goes to VA02 t code and put this order no 10000 and changes the material X qty from 10 to 12 and opens up the whole order once again
This can be controlled by using t code OVAH choosing message class the V4 message no 083 and change from warning to error
Case2
But to avoid the user to add material Y to the existing order say 10000 then i think we have to go for user exit
Because the system doesnot even throw a warning message too in case 2 (according to my knowledge) and allows another line item to be added in the same order
But you can test it if it throws any warning message we can try to convert that error
But in case 2 it is not happening(even warning is not there)
Regards
Raja -
Material Creation Using BDCs.
Hi all,
I have developed a program for Material Creation using BDC.
Material is Being created and that is working well and good.Here i have a Requirement to update the Newly creted material in Ztable.So when i use call transaction mathod,i have written code for updation under the line CALL TRANSACTION.where in iam getting newly creatde material from MARA table,and so it is working perfectly fine..
But our requirement should be sessions method,so when i use sessions method and exeute the program..we face the problem of updation.
the piece of code for updation is updating previously created material.
Literally speaking only the sessions are created ,when the program is executed,material is not created when program is run.Material is only created when the sessions are processed using SM35,
So how should i do here,where should be the updation code written and where will we get the newly created material in sessions method..
Pls Help me in solving this problemhai priyanaka it might be due to configuration problem
bcos manulay also ur gettign this , so just consult ur MM consultant for soem setting
regards
afzal -
Material Creation Date and Time
Hi,
Is there any place which stores the material creation date and time. We have checked table MARA, but that only has the creation date of the material, but does not give the material creation time. We have checked table CDHDR, but that only seems to have the material change date and time.
From where can we retrieve the material creation date and time.
Thanks and Regards,
JohnActually, CDHDR and CDPOS will have the value. The CDHDR record will be marked as a 'U" record but look at the corresponding CDPOS record for MARA and it will be marked as an 'I' record.
-
Error in pipeline material creation
hi,
we want to create one pipeline material as per our new requirement for showing gas consumption.during material creation with mat type PIPE, it's showing an error:The field Profit Center is defined as a required field; it does not contain
an entry.
Procedure
If the field is the material group or unit of weight, and the field is not ready for input, check whether the material is locked. If it is locked, you cannot extend the Purchasing view or the Sales view. If either of these views needs to be extended, the material must first be unlocked. This can be done only by a user with special authorization.
thanx,
sheetalHi
In your client if Profit center accounting(PCA) is activated ,then you need to maintain the Profit center for the material.
Option 1: goto OMS2, got details of pipleine material & select the Costing View of the material.
Now goto MM01 in creation of pipeline material & maintain the profit center in Cotsing 1 View.
Deactivating the field from mandatory to optional will not serve your purpose as PCA will get affected.
Thanks & Regards
Kishore -
Block cancellation/creation of billing document on CLOSED posting period
Hi Experts,
Currently, user is allowed to cancel/create backdated billing document where period already closed, but it does not release to accounting automatically, due to the period has been closed.
When account user found out that the accounting document is missing for the billing document, they have to re-open the period and manual release it to accounting, in order to generate the accounting document.
Therefore, we need the billing document to be blocked for cancellation/creation on CLOSED posting period.
Is there any settings in stardard SAP to block cancellation/creation of billing document on CLOSED posting period?
would appreciate your inputs.
Thanks and Regards,
N.C.ReddyHi ,
We have blocked cancellation/ creation of billing document through below user exit. Below is the progran code also.
***INCLUDE RV60AFZC.
FORM USEREXIT_NUMBER_RANGE_INV_DATE USING US_RANGE_INTERN.
Example: Number range from TVFK like in standard
US_RANGE_INTERN = TVFK-NUMKI.
*{ INSERT KPDK904773 1
*Block creation or cancellation of billing doc in closed period
DATA : gv_gjahr TYPE bkpf-gjahr,
gv_monat TYPE bkpf-monat,
gv_poper TYPE t009b-poper,
gv_bukrs TYPE t001-bukrs,
lv_gjahr TYPE t001b-frye1,
lv_monat TYPE t001b-frpe1,
gv_oper TYPE t001b-frpe1.
CLEAR : gv_gjahr, gv_monat, gv_poper, gv_bukrs.
gv_bukrs = vbrk-bukrs.
IF NOT likp-wadat_ist IS INITIAL.
*- First determine the Period of the Actual GI date.
CALL FUNCTION 'FI_PERIOD_DETERMINE'
EXPORTING
i_budat = likp-wadat_ist
i_bukrs = gv_bukrs
IMPORTING
E_GJAHR = gv_gjahr
E_MONAT = gv_monat
E_POPER = gv_poper
EXCEPTIONS
FISCAL_YEAR = 1
PERIOD = 2
PERIOD_VERSION = 3
POSTING_PERIOD = 4
SPECIAL_PERIOD = 5
VERSION = 6
POSTING_DATE = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
CLEAR : lv_gjahr, lv_monat.
lv_gjahr = gv_gjahr.
lv_monat = gv_monat.
*- Once period is determine check whether Period is open or not for 'D' - Customer Account
CALL FUNCTION 'FI_PERIOD_CHECK'
EXPORTING
I_BUKRS = gv_bukrs
i_gjahr = lv_gjahr
i_koart = 'D'
i_monat = lv_monat
IMPORTING
E_OPER = gv_oper
EXCEPTIONS
ERROR_PERIOD = 1
ERROR_PERIOD_ACC = 2
INVALID_INPUT = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
*- Once period is determine check whether Period is open or not for 'S' - All G/L Accounts
CALL FUNCTION 'FI_PERIOD_CHECK'
EXPORTING
I_BUKRS = gv_bukrs
i_gjahr = lv_gjahr
i_koart = 'S'
i_monat = lv_monat
IMPORTING
E_OPER = gv_oper
EXCEPTIONS
ERROR_PERIOD = 1
ERROR_PERIOD_ACC = 2
INVALID_INPUT = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
*- Check Billing Date period is closed or not
IF kom-fkdat is not initial.
clear : gv_gjahr, gv_monat, gv_poper.
*- First determine the Period of the Actual GI date.
CALL FUNCTION 'FI_PERIOD_DETERMINE'
EXPORTING
i_budat = kom-fkdat
i_bukrs = gv_bukrs
IMPORTING
E_GJAHR = gv_gjahr
E_MONAT = gv_monat
E_POPER = gv_poper
EXCEPTIONS
FISCAL_YEAR = 1
PERIOD = 2
PERIOD_VERSION = 3
POSTING_PERIOD = 4
SPECIAL_PERIOD = 5
VERSION = 6
POSTING_DATE = 7
OTHERS = 8.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
CLEAR : lv_gjahr, lv_monat.
lv_gjahr = gv_gjahr.
lv_monat = gv_monat.
*- Once period is determine check whether Period is open or not for 'D' - Customer Account
CALL FUNCTION 'FI_PERIOD_CHECK'
EXPORTING
I_BUKRS = gv_bukrs
i_gjahr = lv_gjahr
i_koart = 'D'
i_monat = lv_monat
IMPORTING
E_OPER = gv_oper
EXCEPTIONS
ERROR_PERIOD = 1
ERROR_PERIOD_ACC = 2
INVALID_INPUT = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
*- Once period is determine check whether Period is open or not for 'S' - All G/L Accounts
CALL FUNCTION 'FI_PERIOD_CHECK'
EXPORTING
I_BUKRS = gv_bukrs
i_gjahr = lv_gjahr
i_koart = 'S'
i_monat = lv_monat
IMPORTING
E_OPER = gv_oper
EXCEPTIONS
ERROR_PERIOD = 1
ERROR_PERIOD_ACC = 2
INVALID_INPUT = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ELSE.
IF kom-fkdat4(2) <> likp-wadat_ist4(2).
ENDIF.
ENDIF.
ENDIF.
ENDIF.
ENDIF.
*} INSERT
ENDFORM.
FORM USEREXIT_FILL_VBRK_VBRP *
This userexit can be used to fill fields in VBRK and VBRP *
Be aware, that at this time the work areas KUAGV KURGV *
KUWEV and KUREV are not filled. *
This form is called from FORM VBRK_VBRP_FUELLEN. *
FORM USEREXIT_FILL_VBRK_VBRP.
Example: change Tax country
VBRK-LANDTX = T001-LAND1.
ENDFORM.
*eject -
Material creation date for perticular plant
Hello Experts,
I have four plant have a same material,so i want to see the material creation date by plantwise.Please suggest me where can i see the material creation date by plantwise? Bcz. I want to develop report for this.
Thanks & Regards,
VinayHi,
Go to T.Code: MM60,Then enter your required plant and execute.
Now you can see the material with created date or last change date and who created.
If helpful then reward.
Regards,
Biju K
Message was edited by:
Bijay Kumar Barik -
BAPI/Function module TO block material which is mentioned in sales order
Hi All
Is there any BAPI to block material which is mationed in sales order....
I am using BAPI_MATERIAL_AVAILABILITY to check material availibility
how to block quantity if it is available whicl creating sales order via
"BAPI_SALESORDER_CREATEFROMDATA2"
..ThanksThe normal SAP ATP done in the sales orders use the figure ''committed qty'' meaning that if the ATP has been done and confirmed, that quantity will not appear in the next sales order as available.
So if You're using the normal BAPI to create the sales order, the normal ATP function will be called in the processing.
Nevertheless another solution to this issue is to have the MTO (Make-to-order) solution where the requirements are ''attached'' to one sales order/line only.....like this the problem of the stock being taken to another customer disappears.
To do this you'll have to configure the following :
- Go to SPRO and go to Sales and distribution -> Basic functions -> Availability check and transfer of requirements -> Determination of requirements using transaction - Here insert the entry with your sales order type - MRP type (from material master - you might want to consider create one only for this solution) and you should use one of the following:
- KEL Make-to-order, mat. variants
- KELV Make-to-ord.variant + consump
- KP Make-to-order with project
and choose the origin of your requirement - 1 - Item category + MRP Type
- Than configure the association of the requirement type above to the requirement class (normally is the same code) transaction *OVZH*
- Than configure the requirement class (this is what will tell the system the MTO) transaction *OVZG* - On the screen in the field Special stock - E - Sales order stock and please ask for help from an FI consultant because the area of *Account assignment is very important to be well configured*
About the BAPI you're using - Its correct - That's the normal BAPI to be used, taking only into consideration the product allocation issue - MARA-KOSCH
Explaining a little the BAPI you're using :
The program should check if the selected material is allocated or non-allocated.
This information is stored in a field MARA-KOSCH.
We should check this field and if the field is not empty then material is allocated, otherwise is not:
select kosch into l_kosch
from mara
where matnr = <VBAP-MATNR>. " Selected material
if subrc = 0.
if l_kosch is initial.
+" Perform calculation for non-allocated materials+
else.
+" Perform calculation for allocated materials+
endif.
else.
" Material not found, skip it ...
endif.
For allocated materials it will be checked allocation for the netting market of that Order.
The calculation rules for allocated and non-allocated materials are different.
For Non-allocated materials
BAPI 'BAPI_MATERIAL_AVAILABILITY' should be used for getting the ATP quantity.
Bapi should be called as follows --
data: lfl_bapiwmdvs type bapiwmdvs,
lit_bapiwmdvs type standard table of bapiwmdvs,
lfl_bapiwmdve type bapiwmdve,
lit_bapiwmdve type standard table of bapiwmdve,
l_dialogflag type bapicm61v-diafl.
call function 'BAPI_MATERIAL_AVAILABILITY'
exporting
plant = <VBAP-WERKS>
material = <VBAP-MATNR>
unit = <VBAP- VRKME>
check_rule = 'A'
+* STGE_LOC =+
+* BATCH =+
+* CUSTOMER =+
importing
+* ENDLEADTME =+
+* av_qty_plt =+
DIALOGFLAG = l_dialog
+* RETURN =+
tables
wmdvsx = lit_bapiwmdvs
wmdvex = lit_bapiwmdve.
Please note that table lit_bapiwmdvs is the input table and to this following input should be passed -
lfl_bapiwmdvs-req_date = sy-datum. "Current date
lfl_bapiwmdvs- REQ_QTY = <Unconfirmed Quantity> in Sales Order Unit
append lfl_bapiwmdvs to lit_bapiwmdvs.
The return value l_dailog will be --
' ' --- Quantity can be Delivered -- Item to be displayed in the Report!
'X' --- Complete quantity cannot be delivered -- ATP failed, Item not to be displayed.
'N' --- Material not relevant for ATP --- Item not to be displayed in the Report.
For Allocated materials
For the allocated Materials, we have to first do the ATP check in same fashion as for Non-allocated Materials and then in addition to this ATP check, we have to also check for Allocation from SIS table S941.
If ATP check fails, straight away the Item should be ignored from Output display.
If ATP check passes, we further check allocation as follows --
Valid entry should select from S941 as -
data: l_period like s941-spbup,
l_BUPER LIKE T009B-POPER,
l_GJAHR LIKE T009B-BDATJ,
lfl_s941 type t_s941.
data: l_bukrs type tvko-bukrs,
l_periv type t001-periv.
* Select company code
select single bukrs into l_bukrs
from tvko
where vkorg = <VBAK-VKORG>.
* Select fiscal year variant
select single periv into l_periv
from t001
where bukrs = l_bukrs.
* Get Period
CALL FUNCTION 'DATE_TO_PERIOD_CONVERT'
EXPORTING
I_DATE = sy-datum
I_PERIV = l_periv
IMPORTING
E_BUPER = l_buper
E_GJAHR = l_gjahr
EXCEPTIONS
INPUT_FALSE = 1
T009_NOTFOUND = 2
T009B_NOTFOUND = 3
OTHERS = 4
IF SY-SUBRC <> 0.
* Ignore entry and skip further processing
ENDIF.
concatenate l_gjahr l_buper+1(2) into l_period.
select single kcqty aemenge from s941
into corresponding fields of lfl_s941
where SPBUP = l_period
and KONOB = 'OBJ_ALL_MATERIALS'
AND MATNR = <VBAP-MATNR>
and zzcnetmark = <VBAK-ZZCNETMARK>
and VRSIO EQ '000'.
IF SY-SUBRC <> 0.
*Ignore entry and skip further processing
ENDIF.
Remaining Allocation = difference between product allocation quantity and incoming order quantity
i.e. (S941-KCQTY - S941-AEMENGE). Now we have to compare this qty with the Unconfirmed qty.
Ensure same Material UOM for quantity comparison as follows --
IF <VBAP-VRKME> NE <S941-BASME>.
CALL FUNCTION 'MD_CONVERT_MATERIAL_UNIT'
EXPORTING
i_matnr = <VBAP-MATNR>
i_in_me = <VBAP-VRKME>
i_out_me = <S941-BASME>
i_menge = <Unconfirmed qty in Sales UOM>
IMPORTING
e_menge = l_menge
EXCEPTIONS
error_in_application = 1
error = 2
OTHERS = 3.
IF sy-subrc <> 0.
* Ignore entry and skip further processing
ENDIF.
ELSE.
*If both Units are same no need for conversion
l_menge = <Unconfirmed qty in Sales UOM>
ENDIF.
Then, compare if Remaining Allocation > = l_menge i.e. Unconfirmed quantity converted to S941-BASME unit, then there is enough allocation for this Material for the Unconfirmed quantity and should be displayed in the report.
Else, the Item should be ignored.
Maybe you are looking for
-
Error while Invoking Web Service: Fusion Payables( CreateInvoiceInterface)
HI, We are testing the webservice from fusion/em site but encountered with an error 'oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Client received SOAP Fault from server : MOAC Priv Name cannot be null; Initialize MOAC" Details:- Url: Fu
-
Update to Mac OS X 10.8.4 HDMI Not Working?
Hi, I have a 15" MBP Retina and after I updated to Mac OS X 10.8.4, connecting to a tv through HDMI no longer works. I have tried different cables, different tv's. When I connect my Lenovo laptop to my tv through HDMI, it works. Thus, I know it's not
-
In http://www.petefinnigan.com/weblog/archives/00000639.htm Pete is worried about listeners with no passwords. Why cant the XE install script set a password for the listener.?
-
Flickery playback and export even when source footage is not flickery
when premiere plays certain clips back it looks flickery these clips are not flickery to begin with, but they become flickery when part of a premiere project, there seems to be no rhyme nor reason for it any ideas how i can solve it?
-
LEAPFROG crashing and quitting unexpectedly ?
Just updated to mountain lion and am having problems using the leapfrog software. Keeps crashing on launch. Ive upgraded flash, and silverlight, repaired permissions, restarted comp - basically everything that every other thread has told others users