Blog entries via email?

Hi all,
Anyone know if the new blog utility in iWeb/.mac will support adding entries via email from a handheld device such as a blackberry?

I'd done something similar long ago, sent an email to my home machine, AppleScript intercepted the email, parsed the subject line and turned on X-10 power module. It was like having Tom Bodett at home.
As for iWeb, the concept is do-able. But at the current state, iWeb is not quite scriptable. You can add a photo blog entry, but it only has images property, so you can't enter any text for it.
Perhaps, next rev.

Similar Messages

Adding blog entries via email

Suggestion: to add blog entries (text and/or photos) to iWeb via email.

I'd done something similar long ago, sent an email to my home machine, AppleScript intercepted the email, parsed the subject line and turned on X-10 power module. It was like having Tom Bodett at home.
As for iWeb, the concept is do-able. But at the current state, iWeb is not quite scriptable. You can add a photo blog entry, but it only has images property, so you can't enter any text for it.
Perhaps, next rev.

IWeb Blog Update via email

I'd like to update my blog via email. Is this an option with my iWeb blog?
Thanks,
-Jack

No

IWeb Blogging: Allowing Users to Subscribe Via Email?

I just created a blog and website in iWeb. Is there a way to allow users to subscribe to my blog via email so they are notified of new blog entries over email? Currently, all I have on my website is an RSS feed.

Create a form in HTML snippet that sends info to your email or place an email link on your page where visitors send an email to you with their address and desire to subscribe. There are many form services available and you can find countless email form tutorials in Google search results. Compile the subscription email addresses into a database or Mail group and BCC or MailChimp the group your updates. Also... users can subscribe through RSS to their email.

Blog entry in iWeb via e-mail?

Hello,
I have an iWeb blog on MobileMe and wondering if it is possible to add blog entries via e-mail? (This feature would be very handy if one is away from his Mac...)
Thanks,
Attila

Welcome to the Apple Discussions. If you don't have a lot of comments and posts to your current blog I urge you to give careful consideration to what Ethmoid suggests.
The "commercial" blogging sites are so much more robust and versatile and have the capability of being posted to from any computer anywhere and from mobile devices, i.e. smart phones or iPads.
You can design the site to approximate the design of your iWeb site and embed it into a page of your site like in this demo: Embed a Site Within an iWeb Page.
In the long run I think you'll be much better off if you can convert now.
OT

Can you set up a subscription service so blog posts are emailed to subscribers

I would like to allow people to sign up to receive my blog posts via email (ie like how they can in blogger etc) but can't see anywhere to do this?
Is it possible?
Thanks

I guess it depends who your targets are - do they have any interest in modern forms of social media or is email even a push for them.
To be able to add a blog post about an important update/thing to do and have it emailed out provides both an easy online place for people to look back over the information as well as the immediate provision of information via email, without me having to both email the people the information and also provide an online back up of that information.
In this case it is creating double the work.
I know I check my email several times a day (OK more than that, lol), social media - facebook - a couple of times a week (so I miss a lot), twitter - nearly never.
How have I found out about most things (personally) in the last two years? - via word of mouth or email.
The market I am working with I would say mostly word of mouth (or frustratingly not enough of that) so am hoping to provide the information via the website and encourage people to check the website more regularly but also know when there is important updates available.
I don't want to have to email out the updates and also blog them for posterity.
It doesn't appear every other blogging software company agrees with you as a subscription service is always available and well utilised.
(oh and I will say I don't think business catalyst was the perfect platform for this site, but I inherited it).

Can you add an RSS feed on an iweb blog that would allow visitors to receive new entries by email?

Can you add an RSS feed on an iweb blog that would allow visitors to receive new blog entries through their email?

RSS feeds don't do that - if they add the feed to an RSS reader (including Safari or FireFox) they will see new updates every time they check: but sending them emails on each added episode would require extra programming in the actual program, which iWeb doesn't provide. You would need to have a mailing list and send out an email manually each time you add an episode.

Dunning letter via email with invoice attachments

Hi Experts,
We have requirement where in dunning letter should be send to customer via email along with invoice attachments.
We have copied standard script F150_DUNN_02 to custom one as per requirements and configured it in SPRO. We are using BTE 1040 to fetch the customer email address and assign it to structure c_finaa-intad.
This serves the purpose partially. The email goes to customer with dunning letter as an attachment properly.
The question here is how to send additional invoice attachments in the same mail? For example, if dunning letter contains 3 line items, then email should have 4 attachments( 1 dunning letter and 3 invoices).
Is it possible by some config steps? or please suggest me suitable approach to solve the problem.
Appreciate your help.
Thanks
Swati

Hi Partha,
Here are the steps that you can follow :
1. Using following SPRO path assign the dunning form.
Financial Accounting (New) > Accounts Receivable and Accounts Payable > Business Transactions > Dunning > Printout > Assign Dunning Forms
2. There is standard BTE (00001040) that is provided by SAP which is called when dunning is run. SAP has also provided sample function module SAMPLE_PROCESS_00001040 to indicate how to use the BTE. The FM imports I_KNA1 strutcure and pass back structure C_FINAA.
3. Copy the standard FM to custom Z-FM and using I_KNA1-ADRNR fetch customer email address. If email is maintained, set c_finaa-nacha = 'I' and c_finaa-intad - <email>.
4. You can also set the title of PDF file in email by setting c_itcpo-tdtitle as per requirement.
5. Goto transaction FIBF. Settings-> Process Modules-> of SAP Application
6. Add new entry with Process 00001040, application FI-FI and function module as custom FM created in step 3.
Above steps are enough if you want to send dunning email to customer. If there is a need to send invoices as an attachments along with email then there is a need to enhance the standard FM PRINT_DUNNING_NOTICE. I used following approach to achieve the purpose.
a. I created another custom FM to send invoices which I am calling from PRINT_DUNNING_NOTICE. For this, I am using implicit enhancement option to modify standard code. With this option, I am able to send 2 emails back-to-back one with dunning letter and other containing all invoice attachments with respect to dunning letter.
Let me know, if you need further guidance.
Regards,
Swati

Help, my new Blog entries, since iLife '08 upgrade, don't show ANY text!

Ever since upgrading to iLife '08, my new Blog entries do not show any of the text once it is uploaded to the server. In fact, all of my recent Blog entries now have all thier text gone when viewed online. Only Blog pages in "Archives" are still normal. What gives?! They all look good in iWeb, but not live. Thanks for your help. Wayne
[email protected]

Hi Cedric. I went ahead and took down all recent changes to my site, and then just re-uploaded my last good set-up from iLife 2006. I think iLife 2008 changes how blog pages are addressed. As an example, my two most recent good entries show on the web as:
http://waynelhenderson.com/Blog/693901ED-99E6-42D3-8AA9-7F8338989B47.html
http://waynelhenderson.com/Blog/629035FF-E021-4B9D-AFE5-D091583E0676.html
Notice the long string of numbers, letters, and dashes, after the word /Blog/? My iWeb in iLife 2008 no longer puts those types of strings at the end of /Blog/. Instead, the Blog web entries show as:
http://waynelhenderson.com/Blog/Entries/2007/10/26Tuning_In_With_Wayne_Henderson_podcast_39_%26_40%2C_by_Wayne_Henderson_Voice-ove rs(206)984-1446iPhone_GreenpeacePackers!.html (before I took it down because it wasn't working right).
Could the fact that instead of the string of number, letters, and dashes after /Blog/, my iLife '08 uses "/Blog/Entries/2007/10/26_Tu....etc" have anything to do with my problem of text not showing?
I've always used the same fonts, sizes, and colors. But now it's not working. What is weird, however, is that if I did Select All, and Copy and Paste the web page contents onto Notepad...the text IS THERE...just not showing on the web.
Argh!
Wayne

In Adobe froms - Sending PDF file as Attachment via email

I have to develop a PDF form and one more requirement; I have to change the mail Content (body) and the Subject line which should have attached PDF file.The (Transaction Code VA21) Has the sending the Email part. My Requirement is to Change the Content (body) and the Subject.
Requirement;
When customer request for the quote, quote document is created in SAP (Transaction Code VA21). Promised Price, quantity, date is communicated to customer via quote output. Customer may decide to place firm order with reference to quote.
So this form (PDF file and send via email) is used to communicate the AMAT quote to customer. The PDF file will be as a attachment in the mail. With change subject line, and content of the mail (Thanks for the Quote, Please dont reply to this mail). It also consists of applicable terms & condition of the quote.
Is it possible to handle the Content and the Subject of the mail in Program or Form layout (SFP). or it's Enhancement?
How to go about it? I tried a lot. At last am contacting you. Please.............. Let me know. Very urgent.Point will be given sooon. Tnx a lot.....
#Sinivas

Hi,
Yes But you can use ADOBE FORMS for that... Check this link for presentation...
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0c139d3-3eae-2910-01a1-d253f2587b0e?prtmode=navigate
Check this BLOG for sending Email through ABAP..
Sending E-Mail from ABAP - Version 610 and Higher - BCS Interface
One more thing... You can download your data to a PDF file and send that PDF file via program...
Search this Forum for more answers.. you would get plenty out of it...
Check this thread for further information..
Sending mail with 2 attachments
Hope this would help you.
Any queries plz revert back
Good luck
Narin

Problem with complete task via email

Hello,
I have problem with complete task via email. I found this blog very useful (http://blogs.adobe.com/ADEP/2010/11/how-to-complete-a-task-via-email-using-reply-to-comple te.html), but...
I set up everything as it’s written in blog mentioned above. When a task is assigned to me, I received an email notification with actions (accept, deny). After that I replied with action “accept”. Then I received email with subject “Errors from LiveCycle ES”:
LiveCycle ES has tried to process your request and encountered the following error:
com.adobe.pof.POFRuntimeException: Transaction is not active: tx=TransactionImple ; – nested throwable: (javax.resource.ResourceException: Transaction is not active: tx=TransactionImple )
This response to your original email
Subject:RE:Task Assignment – Process: Test/Email_Test. Task 76 has been assigned to you.
Date Sent:Thursday, October 24, 2011 1:17 PM
Body:accept
DO-NOT-DELETE: MTMhMzE0ITMyOA==!
Attachments:
In log appeared this following error:
Caused by: ALC-DSC-215-000: com.adobe.idp.dsc.DSCRuntimeException: None of the Auth Provider could authenticate the user. Authentication Failed
at com.adobe.livecycle.notification.TaskNotificationServiceImpl.processEmailComplete(TaskNot ificationServiceImpl.java:1157)
Can you me please? I have no idea what to do to succesfully complete task via email endpoint. Thanks
Jan Petrla

Hi Diana, thanks for your reply.
You're probably right about 2 different error messages.
To the 1st one: I'm sure that status task is Assigned (to me). I received an email and I also reply on that email.
To error log: I found out that error log appears when I enable email endpoint on Complete Task service. But I managed to solve this problem. I set wrong user. Now I have here the same user as is written in login-config.xml so log seems to be ok.
So I created new task and tried to complete it via email. Now I receive email with another error:
LiveCycle ES has tried to process your request and encountered the following error:
com.adobe.idp.dsc.provider.service.email.impl.EmailProviderException: Error getting user context
This response to your original email
Subject:RE:Task Assignment - Process: WorkFlowClient/Test. Task 92 has been assigned to you.
Date Sent:Thursday, October 27, 2011 3:05 PM
Body:Complete
DO-NOT-DELETE: MTIxMSExNjAzITIwMTE=!
Attachments:
And to the last point: email endpoint is set up with TestPOP3@mydomain and user receiving email has jpetrla@mydomain. I use Lotus Notes as email client, I tried another account with gmail, but the result was same.
Now I really don't know to do...
Jan

To send output as a PDF attachment via email

Hi experts
I have the (smartform) output data in OTF format..and displaying it in PDF form with FM 'HR_EFI_SHOW_PDF_FORM' .
Now the requirement is to send this output as a PDF attachment via email.
Please help me with sample code to perform this.
Regards,
Matt.

Hi,
Check this links,
/people/sap.user72/blog/2004/11/10/bsphowto-generate-pdf-output-from-a-bsp
Also for email:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/8cd6adbb-0301-0010-39ba-938c601d5db9
Refer the following link for more details:
http://www.sapdevelopment.co.uk/reporting/rep_spooltopdf.htm
Thanks,
Reward If Helpful.

Send spool list ceated by Job (SM36) as pdf-file via email

We are running the report RM06EFLB (Transaktion ME84 - "Create Releases") in the background.
The Job is creating a spool list with 17 pages.
I want to send this 17 pages (in a readable form) to a number of persons.
This did I try so far:
- Distribution list with Recipient type "via Internet" as Spool list recipients in the Job. (Tried different formats for ABAP List in Transaction SCOT)
=> Email is send to recipients, attachment is readable depending on format.
 Problem: attachment is not complete, it contains only about 15 pages (985 rows).
- Distribution list with Recipient type "Internal User - SAP-Office" as Spool list recipients in the Job.
=> Document is sent to Business Workplace
 Problem: attachment is not complete, it contains only about 15 pages
Any ideas how to get the complete spool list?
Is there mayby a report around that is sending a spool list as pdf-file via email to a number of recipients?
(Would like to maintain this Report as an additional step in the job. The spool-number should be selected from the previous step.)
Thank you for your help.
Jens

Oh sorry - here is the coding which is used in that program:
First use function module 'CONVERT_ABAPSPOOLJOB_2_PDF' to convert the spool entry into pdf.
Loop at output table PDF and concatenate all lines into a string. Convert string to xstring.
Then call mail class:
DATA: lv_pdf_x TYPE xstring,
 lv_subject TYPE string,
 lv_doc_desc TYPE so_obj_des,
 lv_mail_body TYPE soli_tab.
DATA: ls_atta TYPE rcf_s_att4mail_hex,
 lt_atta TYPE rcf_t_att4mail_hex.
* -- Fill parameter
lv_subject = 'Requested Report'."#EC NOTEXT
lv_doc_desc = 'Report XXL'."#EC NOTEXT
* lv_mail_body = ?
ls_atta-name = lv_doc_desc.
ls_atta-extension = 'PDF'.
ls_atta-content = p_pdf_x. <- This is your xstring
APPEND ls_atta TO lt_atta.
TRY.
 CALL METHOD cl_hrrcf_services_mail=>send_web_mail
 EXPORTING
 p_subject = lv_subject
 p_receiver = p_receiver->email_address
 pt_atta_hex = lt_atta
 p_sender = p_sender->email_address
 p_body_c = lv_mail_body.
 CATCH cx_hrrcf.
ENDTRY.
I hope that you have the above mentioned class in your system but it should work with other email functions as well.
Regards
Nicola

PO output sending to vendor via email by PDF Format

Hi All,
Business needs to send the PO output in PDF Format to multiple vendor contact via email. They also needs soem text in the body of the mail.
Is it possible to config via standard SAP or we need to develop a customed program?
Suppose If it is possible via standard SAP can some one post the detailed steps.
Thanks in Advance
Regards
Karthick

External Send - Sending PO by email
In order to send PO, your Basis team must configure the system first so that external email can be send out from SAP. If it is not configured, no settings you do on MM will work.
1. You must maintain email address in vendor master data.
2. The same applies to your user master data. For the output type for default values, a communication strategy needs
to be maintained in the Customizing that supports the e-mail. You can find the definition of the communication strategy in the
Customizing via the following path:
(SPRO -> IMG -> SAP Web Application Server -> Basic Services -> Message Control -> Define Communication Strategy).
As a default, communication strategy CS01 is delivered. This already contains the necessary entry for the external communication. Bear in mind that without a suitable communication strategy it is not possible to communicate with a partner via Medium 5 (external sending).
3. Use the standard SAP environment (program 'SAPFM06P', FORM routine 'ENTRY_NEU' and form 'MEDRUCK') as the processing routines.
4. In the condition records for the output type (for example, Transaction MN04), use medium '5' (External send).
5. You can use Transaction SCOT to trigger the output manually. The prerequisite for a correct sending is that the node is set correctly. This is not described here, but it must have already been carried out.
6. To be able to display, for example, the e-mail in Outlook, enter PDF as the format in the node

Photos in text of blog entry do not port to main blog page

I have posted before about the photos from my entry page disappearing when ported to my main blog page. I have yet to find a solution so I'm asking for help again.
I'm am trapped using iWeb 1.1 until I find a solution. I use the Modern Template with modifications. Usually I delete the snowboarding surfer placeholder. Please note I'm not concerned that this photo doesn't port. I don't want it to. I do however need the photos that I have embedded via text wrap within my blog entry to port to the main blog page. They do not.
I have tried keeping the snowboarder place holder and redoing entries with wrapped text, but my additional photos are still missing. I have checked the box in iWeb 2 that says show photos. My layouts conveted to iWeb 2 look perfect on the entry's page, and horrible with missing photos on the summary page.
This problem is beyond frustrating. My blog can be seen here, however it is still the iWeb 1.1 format.
http://web.mac.com/knittsings/iWeb/knittsings/knittsings/knittsings.html
As you can see, almost all my entries have numerous photos. I want them to display on the main blog page.
Am I missing something very basic? I have seen others with this same question but no one seems to have had any luck resolving this problem.
Thanks,
Kathryn

And that's the way it should be.
If you look at this page about navigation you'll see that the main navigation uses eternal links and the sub navigation internal ones....
http://www.iwebformusicians.com/WebMusic/Navigation.html
Try the troubleshooting steps under "Fix iWeb" here.....
http://www.iwebformusicians.com/WebMusic/iWebTips.html

Blog entries via email?

Similar Messages

Maybe you are looking for