Blue Checkered Screen after using the Recovery Disks

I have a Compaq Presario SR2034NX XP Media Center computer. I followed the instructions and installed all the recovery disks. The screen then said to remove all disks and that it's going to reboot several times to finish the installation. During this process I got a blue checkered screen. I'm not sure what to do at this point. I took a picture of what the screen looks like and I'm enclosing a link to the picture here.
Click below to see the picture of what my screen looks like after using the restore disks:
http://bit.ly/ifajT6
Thank you for your help and time!

I run into the same problem with fresh installation of W7 Pro on T530 with 1TB samsung disk.
This solution worked for me:
    Running check for updates will trigger this error message:
“Windows Update cannot currently check for updates, because the service is not running. You may need to restart your computer.”
Solution:
1.    Go to Administrative Tools/Services, and stop the Windows Update service.
2.    Then go to the folder c: /Windows/SoftwareDistribution and delete all of the files and folders.
3.    Then go back to Services and restart the Windows Update service which will recreate all of those folders again.
4.    Then manually run the Update Service and everything should work.

Similar Messages

Satellite L500-19X - Can't use the recovery disk

Well I got this laptop two days ago and used it once after installing fire fox and my mobile broadband drvier's and going back home to boot up and find it was going to happen,
I had tried safe mode (all three) and repair and all I got was a black screen with the cursor up where there should have been a language screen (I used the recovery disk that came along with the laptop) so anyway after finding out I wasnt going to be able to repair it I tried to install but of course that didn't work either so I put my XP 64 bit OS on and worked perfectly fine, then I upgraded (using my own upgrade windows 7) and that works fine no problems, so I tried again with the original windows 7 that came pre-installed on the laptop's hard drive and all went find untill it starts installing driver's or updates (I'm not 100% sure on this but it is at and/or after the face recognition installation,
Then it shuts it's self down and boots back up to automatically restart and asking me if I want to repair due to a bad start-up so I do the repair boots back up and still says I need to repair and finds nothing wrong and carrys on in that circle.
Now I have been told that it could be the register or it is a graphics problem, I myself am getting pretty fed up of having to install/reinstall/format this laptop.
So if there is anyone who know's what is wrong or what to do or even if it needs to be sent back to be fixed that will be very helpful.
I thank anyone in advance.
Happy new year :)

Hi
Well, I think its really hard to say what the reason is. Maybe the recovery disk is scratchy or the files corrupt there.
At the moment I cant imagine that its a hardware problem because other Windows disk working properly.
In your case I would try to install Windows 7 from a Microsoft disk and then see what happens. If it works properly and you can install all drivers & tools you should order a new recovery disk from Toshiba directly.
Bye

Satellite A300-1mz Can I use the recovery disks after a HDD upgrade?

I'm upgrading the hard drive of my *toshiba a300-1mz*, but I'd be sure that I can use the *recovery disks* maked at the first boots for the s.o. (vista)
I expect your support...
thank you very much...

> how can I be sure that the disk is properly recognized before I buy it???
What do you mean exactly? Did you mean the HDD???
The A300 supports and 2.5 SATA HDD and all 2.5 HDD should be recognized properly since the SATA HDD controller hasnt any limitations.
Bye

How do i use the recovery disks and backup and restore my laptop in a new HDD without losing OS lic?

I am running a HP-DV6 6090ee laptop with windows 7 Home Premium 64bit OS. This problem started from last evening.
I am getting a "Smart Hard disc error" error message before boot and ater booting windows saying that my HDD is having problems and i need to backup and check the hdd.
After checking i found that i have a corrupted hdd and i am going to replace with a new one.
I need to know the following :
> How do i restore my windows license and my antivirus license in the new hdd?
> i dont currently have a OEM HP OS cd. can i use any windows 7 cd??
> at what stage should i use the recovery disk i created from the recovery partition be used? Whats its specific use?
I really appreciate any quick response as my current HDD is running out of life.
Regards
A

See these 2 Links...
Syncing to a New Computer...
https://discussions.apple.com/docs/DOC-3141
Recovering your iTunes library from your iPod or iOS device
https://discussions.apple.com/docs/DOC-3991

How can i reformat my harddrive using the recovery disk stored in partition drive?

hi guys! i need help. i need to reformat my harddrive and i will do this for the first time. however, i was not ablt to make the recovery disk since i purchased the tx2 1275dx laptop last july 2009. what i have is a recovery disk stored in a partition harddrive. how can i reformat my cpmputer using the recovery disk in partition harddrive? my OS is windows vista. thank you...

Hi,
Shutdown the notebook. Tap away at f11 as you start to access Recovery Manager which you can then use to reinstall the Operating System.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Using the Recovery Disk

Hi,
I have a Toshiba Satellite Model: A135-S4527. My computer has been crashing randomly, and I am looking to re-install the factory image. However, my DVD drive is broken, and thus, I cannot use the recovery disk directly. I tried to buy an external USB DVD drive, but the recovery disk does not seem to be able to work using the external DVD drive, When I try to re-install with the disk in the external DVD drive, it keeps asking me to insert a disk into the internal DVD drive (D, even though the internal drive does not work anymore. Does anyone know if there's any way I can reinstall the factory image with an external DVD drive, or other method? Thanks for the help!
-Henry

henry2304 wrote:
Hi,
I have a Toshiba Satellite Model: A135-S4527. My computer has been crashing randomly, and I am looking to re-install the factory image. However, my DVD drive is broken, and thus, I cannot use the recovery disk directly. I tried to buy an external USB DVD drive, but the recovery disk does not seem to be able to work using the external DVD drive, When I try to re-install with the disk in the external DVD drive, it keeps asking me to insert a disk into the internal DVD drive (D, even though the internal drive does not work anymore. Does anyone know if there's any way I can reinstall the factory image with an external DVD drive, or other method? Thanks for the help!
-Henry
The Toshiba recovery disk requires the internal CD/DVD drive. There isn't any workaround for that.
Sorry.

GT60 - Can I break RAID0 and then use the Recovery disks?

Is it possible to break the RAID0 and then use the recovery disks from MSI Burn Recovery or a Windows Home Premium Disk with the code from the sticker on my laptop, to install back to factory settings without the RAID0? Just want to make sure before I do something drastic. Thank you.

you can always make an system image of your current windows on an external drive and then experiment with it and if anything breaks, just change bios settings to older ones and recover your older system, everything will be intact like nothing ever happened.

Equium A210-1C4: Winload.exe problem after using product recovery disk

Hi There
I Could really do with some help here. I have a Toshiba Equium A210-1C4 Laptop. Partitioned drive with Vista home premium service pack 4.0.
Last night I used the product recovery disk supllied with the laptop to try and restore it back to its factory settings.
and the end of the process I'm left with a cmd prompt box with X:\windows\system32\cmd.exe in the blue top bit stating:
Error: imageX could not apply vista F:\05993xsp.swm Index 2 from ODD to C:\!
Press any key to continue. That box dissappears then another one with Administrator: X:\windows\system32\cmd.exe in the blue top bit stating:
waiting for ODD to become available...
ODD Drive F: ready.
check for medium in drive F:...
Failed to initialise the raid class.
No RAID - continue normally...
X:\windows\system32>
Now whenever the laptop tries to restart it just comes up with the error message:
WINDOWS FAILED TO START. A RECENT HARDWARE OR SOFTWARE CHANGE MIGHT BE THE
CAUSE
FILE: \WINDOWS\SYSTEM32\WINLOAD.EXE
STATUS: 0XC000000E
INFO: THE SELECTED ENTRY COULD NOT BE LOADED BECAUSE THE APPLICATION
IS MISSING OR CORRUPT
Below I then have the option to esc or continue both with the same outcome of system trying to restart.
The recovery disk has no repair option on it.
please help, I haven't a clue.
thanks

Hi
It looks like something went wrong during the Recovery procedure.
Did you try to recover the notebook once again?
If not you should definitely try this!
You are right; the recovery disk hasnt a option for repair because the recovery disk is not the same like a MS Vista disk. The Recovery disk contains the image files (its a package) and the files contains the Vista, Toshiba drivers, tools and additional software.
Therefore if something went wring during the recovery procedure, you will be not able to repair the OS installation but you have to run it again.

Satellite P500 - Restart loop after using Toshiba recovery disk

Hi,
I have got a problem recovering SATELLITE P500. I had made the recovery disks. It boots ok from the recovery disk and formats the hard drive and copies the disks to the hard drive. It then starts windows setup and reboots.
Then it goes to a loop
1) Start up and says "Setup is preparing your computer for first use"
2) Toshiba banner saying please wait... Finnishing installation may take several minutes. Pleae do not interupt or shutdown the computer!
3) Windows logo
4) Shutting down...
5) restarts and goes to 1)
It would be great if some one could help me with this.
Many thanks,
Softari

Hello
I have noticed the same on my Satellite P500 but I must say its not an issue, its absolutely normal. The notebook will restart several times (10 times or more) to finish the installation.
You must know that a lot of drivers/tools will be installed and certain restart must be done to configure everything properly.
So dont interrupt the recovery installation, just wait a little bit longer and drink a coffee. Everything happens automatically and your notebook will be reinstalled with factory settings. :)

Equium A210 171 What info do i need before i use the recovery disk?

Hi,
I have 1 recovery disk that came with my equium, haven't used it before.
On the back of the recovery disk envelope it says "insert the first disk"
I'm assuming there should be a second?
Also what info will i need to provide during the install process? like serial number?
All i have is a black and white sticker that's on the side of the box it came in, but that was so long ago.
I'm having lots of issues with windows installer not running and many others,
Windows updates won't work either and i've tried to fix those but a clean reinstall of the os was recommended.
Now at this point nothing will install because windows installer won't work.
So i think i wil lhave to attempt a clean install, but i'm not even sure the cd drive will work.
I have gotten a great run out of this laptop, bit slow for my needs today but over all great product, bought in 2007.
With a clean os and 4 gigs of ram this thing could last for years more, can't afford a new one right now.
I have really tried to avoid using a recovery disk in the past, as i've never had any serious issues till now.
Thanks
Message was edited by: sounds

> I have 1 recovery disk that came with my equium, haven't used it before.
>On the back of the recovery disk envelope it says "insert the first disk"
>I'm assuming there should be a second?
Im wondering why you get such disk together with your notebook why? Because I did not get the recovery disk but I had to create one using the Toshiba Recovery disk creator software
But my notebook is newer than your A210 this might be the reason why you got such disk
I created a recovery disk and I needed two DVD disks I think these depends on the image file size
> Also what info will i need to provide during the install process? like serial number?
This is not needed because your system was already activated.
But I recommend to backup your personal data because the recovery disk would format the whole HDD and you would lose the files.
PS: recommend reading the other threads in the Product recovery forum!

T500 - Windows Update no longer works after using factory recovery disks.

I'm running Windows 7 32bit. I needed to restore my T-500 hard drive because of a fatal windows registry error caused by a 3rd party registry cleaner/tuner software... Windows 7 was DOA .
I used the factory recovery disks I created after I first fired up the laptop in April this year, all went well, Windows 7 booted up, and I went through the "Starting Widows for the first time" setup dialog, Windows 7 sucessfully activated... also verfifed it on the Microsoft website.
Went into control panel to have windows update pull down all of the critical updates released after I got my Thinkpad and I got a pop up saying "windows update cannot currently check for updates because the service is not running. You may need to restart your computer."
I checked... the windows update service is running, so is BITS. Following suggestions from Microsoft support, I have 1)deleted the softwaredistribution folder from C:\windows, 2) run their "fixit tool", 3) renamed the CatRoot2 folder in C:\windows'system32, all to no avail each time I tried to use windows update after each "fix".
I decided to check here if anyone here has gone down this path before and ask what fixed it?
I'm waiting for Microsoft support to reply to my last email informing them the last instructions to rename the CatRoot2 folder and retry windows update failed. They now have a copy of my windowsupdate.log file sent to them.
How about it... does this situation sound familiar to anyone?
Thanks.

I run into the same problem with fresh installation of W7 Pro on T530 with 1TB samsung disk.
This solution worked for me:
    Running check for updates will trigger this error message:
“Windows Update cannot currently check for updates, because the service is not running. You may need to restart your computer.”
Solution:
1.    Go to Administrative Tools/Services, and stop the Windows Update service.
2.    Then go to the folder c: /Windows/SoftwareDistribution and delete all of the files and folders.
3.    Then go back to Services and restart the Windows Update service which will recreate all of those folders again.
4.    Then manually run the Update Service and everything should work.

Cannot recover the notebook using the Recovery disk

Hello.
I was wanting to restart my Toshiba Laptop, and I inserted the 'Recovery' CD, and pressed F8 and went to the help menu, and when the list came up I clicked on the one that said about restarting my PC and losing all data, and then I clicked on 'Restart' and the computer restarted and the disc was in but it just came back on as normal.
What do I need to do? I tried all the other options and they all worked as normal.
What do I need to do? Do I have to press something else?
Any help would be appreciated, thanks.
~Confused~

To be honest after reading your posting I am more confused then you.
Can you please tell us which notebook do you have?
F8 and disc inside the optical disc drive. Sorry but something is wrong there.
Either you can install Vista again using image saved on HDD (F8 option Repair my computer) or use Toshiba recovery installations media. There is no sense to use both at the same time.
Please more info needed.

Iam not getting the data on screen after using the user exit zxpadu01

Dear Freinds
            As per my requirement when the user enters value Ansal it should get defaulted to Amount field (bet01 ) based on the wage type
i have written calculation ( q0008-bet01 = ansal/100) before it getting defaulted to bet01, i found that value is not getting default on the screen for bet01 once i enter value for Ansal , please any body correct my code
in   ZXPADU02 i have written the code as below :
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.   -- HERE I GOT ALL THE DATA EXCEPT BET01
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008 --- HERE I CAN SEE EVEN THE BET01 IS FILLED
IMPORTING
prelp = innnn.         --- HERE I CAN SEE LGART BUT NOT AMOUNT VALUE
endif.
when others.
endcase.
IN ZXPADU01 I HAVE WRITTEN AS BELOW:
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008   --- I CAN SEE ONLY WHEN I COME AGAIN
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
Now my problem is as follows :
               i have entered the value for Ansal (ex: p0008-Ansal = 1000) ..........and i say enter then i should found the calculated value for the ansal through my coding
and it should display in bet01 as 10 ( q0008-bet01 = p0008-ansal /100)
but i dont find the value 10 being displayed for the field bet01 on the screen when
user enters Ansal as 1000 .........even then i have saved it to test the scenario......
now i came in displayed mode (pa20 ) for the infotype 008 for the same personnel no for the same dates .....where i created the record........i found that the value
bet01 is there i.e i can see the value bet01 as 10 ( my requiremnt here matching)
but when the user say enter during the time of creation of the record the value
bet01 is not getting defaulted with 10 .........why iam not able to understand
PLEASE ANY BODY HELP ME IN THIS REGARD
regards
shanti.

Hi Pranesh,
               i have used the logic which you hav given as below
in ZXPADU02
FIELD-SYMBOLS <fs> TYPE ANY.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount . --- amount as (ansal /100 i.e 1000/100 = 10) 10
endif.
still iam not getting the data for the field bet01
this is the coding i am using
data : wa_p0008 like p0008,
        i0008 like p0008,
       l_v_ANSAL type ANSAL_15,
       l_v_amount type PAD_AMT7S.
FIELD-SYMBOLS <fs> TYPE ANY.
CASE innnn-infty.
when '0008'.
MOVE-CORRESPONDING innnn to wa_p0008.
CALL METHOD cl_hr_pnnnn_type_cast=>prelp_to_pnnnn
EXPORTING
prelp = innnn
IMPORTING
pnnnn = wa_p0008.
if wa_p0008-lga01 = 'MFPY'.
l_v_ansal = wa_p0008-ansal.
l_v_amount = l_v_ansal / 100.
move l_v_amount to wa_p0008-bet01.
ASSIGN ('(MP000800)Q0008-betrg') TO <fs>.
if <fs> is assigned.
<fs> = l_v_amount .
endif.
CALL METHOD cl_hr_pnnnn_type_cast=>pnnnn_to_prelp
EXPORTING
pnnnn = wa_p0008
IMPORTING
prelp = innnn.
endif.
when others.
endcase.
please help me as iam still not getting (value in bet 01) when i press enter once i enter value in ansal feild.
regards
shanti.

Windows update does not work after using System recovery disk

I have a Toshiba Satellite c655 with WIndows 7 64 bit Home premium. The hard drive died on it, so I purchased a new hard drive and purchased the appropriate Recovery media from Toshiba. I followed the directions and installed the 3 disks on to the new hard drive. But Windows update does not work I get the following error: Windows update can not currently check for updates, because the service is not running. You may need to restart your PC    No matter what I try, I can not get it to work. And it will not let me install Windows Defender either. Any ideas or help would be appreciated. Thank you in advance for your time on this matter.
Solved!
Go to Solution.

I get errors saying A problem is preventing the troubleshooter from starting.
That makes two similarities to the following thread. Both Windows Update and Troubleshooters fail to work correctly.
   Trouble with reinstall of Win7 64 on a L505-ES5018
The fix was to install a new hard disk driver.
   Intel Rapid Storage Technology
-Jerry

Trying to recover my HP dv4-1543sb using the recovery disks and it has failed 3 times. What now?

I'm getting the message
"Recovery Manager could not restore your computer using the factory image. Please contact HP Support. Error code 0xe0ef0003'.

Enter the bios, hold F10 down while powering up, keep holding F10 until the bios loads, in there you will find hard drive and memory diagnostics, run both of the extended tests, post back any error codes.

Blue Checkered Screen after using the Recovery Disks

Similar Messages

Maybe you are looking for