BLUE TOOTH SYNC PROBLEMS

I have tried to sync my Iphone with my wives phone but to no avail, I have also tried to sync with my mates Iphone but again to no avail. it is showing my Blue Tooth is visible but I'm not picking up any other devices, it just keeps saying searching.
When I try to sync it with my Tomtom again my Tomtom picks it up but Iphone won't sync.
Nay thoughts out there?

You can't do what you are trying to do. There is no bluetooth sync or file transfer.
The iPhone bluetooth supports phone headsets, handsfree car kits, A2DP stereo music headsets, and peer-to-peer gaming. Certain apps also use bluetooth for contact and photo transfer.
See this Bluetooth Profiles supported on iPhone or iPod Touch: http://support.apple.com/kb/HT3647

Similar Messages

My apple blue tooth static problem.

Hello, if anybody know how to discharge the static from the apple blue tooth headset, please let me know. it was working fine for a while and then start making that nose. I was trying to ground it but nothing seems to work yet. I have jawbone bluetooth and it does work well with the same 3G Iphone.
Thanks!

jawbone support say they have a method of fixing that at:
http://us.jawbone.com/knowledgebase.aspx

I've been considering the Yosemite upgrade but especially after reading some of blue tooth lag problems, I'm wondering how to be able to go back to mountain lion.

i have been considering upgrading to Yosemite from Mountain Lion but especially after reading about some of the bluetooth lag problems, i would want to be able to return to my current OS, just in case and am unsure what steps to take.

Drive Partition and Format
1. Open Disk Utility in your Utilities folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Apply button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
To clone your existing system:
Clone Yosemite, Mavericks, Lion/Mountain Lion using Restore Option of Disk Utility
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     1. Select Disk Utility from the main menu then press the Continue
         button.
     2. Select the destination volume from the left side list.
     3. Click on the Restore tab in the DU main window.
     4. Select the destination volume from the left side list and drag it
         to the Destination entry field.
     5. Select the source volume from the left side list and drag it to
         the Source entry field.
     6. Double-check you got it right, then click on the Restore button.
Destination means the external backup drive. Source means the internal startup drive.

Blue tooth pairing problem

I have a problem pairing my iphone 4 with my MacBook Air 13''.
MacBook pairs easily with Magic Mouse and I can also discover
the the iPhone connect to it but after 3 seconds the connection drops
Device Not Supported.
Can anybody help !

Thanks this is what I need to use it for but how can I do this?
Do you know know of a link that shows me how as so far I did not manage.
Thanks again

Blue tooth sync to ipad 1

can an ipad1 sync with an ipad2 case/key board

Purchased case/keyboard designed for ipad 2. Unavlble to sync case with my Ipad 1. Do I need to purcahse case specifically designed for Ipad1?
Thanks,

Blue tooth sync on win7 64bit

I installed a dongle stick on my win7 64bit machine but it still will not recognize my treo 755 palm os phone. Works great on my laptop(vista 32 bit)
Any ideas how to make this work?

On your computer, click the start menu and click your control panel, open the bluetooth devices and click on add wireless device (make sure that the dongle stick software and drivers were installed). On your 755 palm phone go into your bluetooth connectivity and click on search. It should recognize your dongle stick, if it does they are connected. Now click on the hotsync icon and click on settings, click on connections and check bluetooth. Now you should be able to hotsync. Hope this helps.

How do i set up sms over blue tooth for my car?

I bought a new car and have voice SMS. Blue tooth sync worked for phone and ipod use but not for SMS text, how can I fix this??
Thank you.

Just create and new ID
Frequently Asked Questions About Apple ID
To use that ID on the iPod go to Settings>Store and sign our and sign back in.

Outlook 365 retrieves same mail over & over -- stops and restarts -- won't sync to iPhone -- won't work with blue tooth in car

Outlook 365 retrieves same mail over & over -- stops and restarts -- won't sync to iPhone -- won't work with blue tooth in car 'm using Win 8

Hi,
How did you set up your email on your Ipnone? Please refer to the article below and try the method to set up your email:
http://office.microsoft.com/en-in/office365-suite-help/set-up-email-on-apple-iphone-ipad-and-ipod-touch-HA102818554.aspx
Do you use Outlook desktop app? If you are talking about a question related to Office 365 web app, it's better to post your question to the Office 365 forum. You will
get the most qualified pool of respondents there:
http://community.office365.com/en-us/forums/default.aspx
If you means that the problem is with your Outlook desktop app, please try to log on your OWA and check if the problem persists there.
Please let me know the result.
Best Regards,
Steve Fan
TechNet Community Support

Nokia e90 printing problems via Blue Tooth

I cant print any words or excel documents with Blue Tooth with the Nokia E 90. I just bought a Canon Pixma 100, with Blue Tooth, but i cant make it work. Can anyone please help??

Have u switched ON the bluetooth in both the devices, does ur laptop have Bluetooth built in, Which version of Windows is your laptop running if its vista or Win7 you can use the built in bluetooth stack, go to control panel > bluetooth devices. and try to connect, If its Winxp then u need to download the drivers from Nokia website
If a reply has solved your problem click Accept as solution button, doing it will help others know the solution. Thanks.

Problem remebering bluetooth pairing with 09 Saab (Gm blue tooth)

I have a 09 saab 9-3, and the car has built in blue tooth. The problem is when i pair the phone it works while the car stays on that whole time. The minuet i turn the car off and try to come back into the car it will not reconnect. If you go to setting and blue tooth and try to tap the correct device it still wont reconnect. The only way to get my GM Blue tooth and my Apple iphone to work is to pair it every time i sit in the car and that just isn't feasible!

1.   Click the Manage Connections icon on your Home screen
2.   First, verify that the Bluetooth technology is turned On
3.   Then select Set Up Bluetooth
4.   Click Search to find other devices or Listen to allow your BlackBerry smartphone to be discovered by other Bluetooth devices
5.   Click on the device you would like to pair with and enter the Numeric Passkey if required
6.   Click Yes
7.   To connect to a paired device, click the Options icon on the Home screen
8.   Select Bluetooth
9.   Click on a Bluetooth enabled device and select Connect
Make sure your headset is also in discoverable mode. Instructions should be included in it's user manual. If this does not work, then I would assume a compatibility issue.
Disclaimer: I'm just a regular user like the rest of you. I have spent a lot of time learning the limitations of the Blackberries to know how to fix most problems. If I have suggested a fix, please give a kudo and mark as a solution!

Sync Problem with Blu Ray

I have a sync problem when using Premiere Pro CS5 to burn Blu Ray DVDs and wondered if anyone has had similar problems and has found a simple solution.
Equipment: Panasonic HMC-150 (AVCHD), shot at 59.94 fps, 720. MacPro with operating system up to date, quad core, 16 GB RAM, Nvidia Quadro 4000. PP CS5 also has all current updates downloaded.
When the AVCHD files are imported, they tend to be out of sync by 8 to 22 frames. I manually resync and edit. Then burn a Blu Ray DVD using Encore and end up out of sync again. I must be doing something wrong but can't figure it out. At this point, the only solution I can think of is to try to figure out how far out of sync I am once the DVD is burned and offset the audio that amount before transcoding.
Has anyone encountered this problem before? Any suggestions?
Thanks.

I have done some more tests and have determined that the problem only exists with Blu-ray. When I burn a non blu-ray dvd, video and audio remain in sync. I attempted to export to Final Cut Pro 7 using the export xml feature, but it doesn't work. I brought the original footage into FCP and burned a portion of it to blu-ray using the Share feature and there was no sync problem. So I guess my only alternative at this point is to re-edit the entire video in FCP.
In Premiere Pro I've checked to make sure that both the camera and the intake were set for no drop frame and they were. I've tried double checking the audio sync using the audio line out from the Mac rather than the firewire out to the Mackie Mixer, just in case there was a latency problem, which didn't seem logical and there wasn't any difference. It can't be a problem with the blu-ray burner since it works in FCP7. I'm running out of ideas of things I can tweak in Premiere, other than guessing just how far out of sync the program pushes the audio and then unlinking audio and pushing it the same number of frames the other direction before burning the blu-ray, but that will be hit and miss and it will start getting expensive throwing away blu-ray disks.
Any other ideas would be appreciated. Thanks. Jon

H.264 blu-ray 720P60 sync problem

I'm not able to maintain sync between sound and video when encoding 720P59.94 sequences (avi or mov) to 720P 59.94 h.264 Blu-ray (standard PrPro export settings). The sync is lost gradually, and at the end of a 42 minute clip, is off by more than a second. In trying to chase this down, I noticed that the exported elementary video file is longer than the source sequence by about 1 frame per minute. The elementary sound file (Dolby or PCM) appears to be the same length as the source sequence.
Although I first noticed this in Encore (Blu-ray project), an import of the "encode" files back into Premiere Pro confirmed the situation.
I checked very carefully to ensure that my sequence settings and export settings are consistant - 1280x720 P 59.94.
I don't see this sync problem with the non-blu-ray h.264 (multiplexed) encode, and I don't see this problem with the mpeg2 blu-ray encoder.
I'm interested to know if this issue is unique to my setup, and if not, if there's a fix or workaround.
I'm running the latest versions of software -
Adobe CS 6.03 (monthly account)
Kona LHi 10.3.2 (up to date)
win 7, i7, 16G ram
Thanks...Ben

Jim,
I found that, of the sequences I've been working with, those that were created by dragging the footage onto the "new" icon were NDF. Sequences that I initiated from scratch are DF. But even after exporting to h.264 from a "DF" sequence, when re-imported and dropped on the "new" icon, a NDF sequence was created.
So...I established a new DF AVI sequence, and copied the source footage into it. This gave me a 720P59.94 DF cineform avi sequence, which doesn't seem any different than the NDF predecessor. Audio and video are in sync from beginning to end - 42 minutes duration.
I did a fresh export from this sequence to the adobe h.264 blu-ray preset (720P59.94, dolby, high, 4.1).
I then re-imported the resulting m4v, and dragged it onto an unused track in the source sequence. As expected, It extended beyond the source by 78 frames (in 42 minutes), and had the gradual drift out of sync.
I applied the 50 % crop, and looked for the first sign of change between the two tracks. I noted that at 00;01;01;42, the h.264 "encode" track seem to take one step backward, resulting in a 2 frame difference for a while. I tried to find the next exact place where a change occur, but found it impossible to do so.
Since this seems kind of weird, it would be helpful to know if anyone else has been successful in exporting a 720P59.94 sequence to h.264 blu-ray, without gradual loss of sync. The duration would need to be long enough for the sync loss to be obvious - 15 minutes or so?

I can not get my Skylanders Portal of Power to sync with my ipad. I turned on Blue Tooth in setting on the ipad and pushed the sync button on the bottom of the portal but it never finds the device. Help

I can not get my Skylanders Portal of Power to sync with my iPad. Blue Tooth is on in the settings and I push the sync button on the bottom of portal but it never finds the device. HELP

Has anyone found a fix to this?

Does anyone know how to activate siri with a button on a 2011 Chevy Silverado that has blue tooth. Also I'd like to know how to sync my iphone contacts with this same truck.

does anyone know how to activate siri with a button on a 2011 Chevy Silverado that has blue tooth. Also I'd like to know how to sync my iphone contacts with this same truck.

Hold down the mute button on the steering wheel until you hear,"Ready" and then say "Voice". That will bring up Siri.

BB 9320 sync with Desktop via Blue tooth

I can't get my BB 9320 to sync with my Outlook 2010 on my Win 7 PC using Bluetooth
It will work automatically when I plug in a USB cable.
Both the phone and the PC see each other in the device blue tooth manager.
I have just added a Gigabyte GC WB 3000D wifi Bluetooth card.
Can any one help???

Yes I have paired the two and sent pictures from the phone to the PC.
I have tried setting up the BB desktop software to see the BB phone but no luck. It worked on the usb cable just fine, I wonder if it is still looking to got a cable connection and not bluettooth.

BLUE TOOTH SYNC PROBLEMS

Similar Messages

Maybe you are looking for