Bluetooth discover VI dosen't work !!

hi
I want to use bluetooth communication in LV 2013. in first step I want find other bluetooth machine in my local.
I use this Function buut it doesn't find any bluetooth device. I turned on my phone bluetooth but LV cannot found that !!
Thanks.
Solved!
Go to Solution.

ajapyy
did you try to Decrease your Time Limit i made my time limit (ms) is 10ms and put it inside the loop and it works perfectly . also make sure that your mobile bluetooth is dicoverable..
Note:
The optional input parameter, time limit (ms), specifies the length of Bluetooth inquiry. The default value is 10 ms and the maximum value is 30 s. If time limit is less than or equal to zero, the function returns a list of installed local Bluetooth devices.
Note: Bluetooth discovery is a slow operation because of the communication involved. A Bluetooth device address is a fixed address that is usually printed on the actual device and you can query the address from the device control setting. This address is unique to each device. If you know the Bluetooth address of the specific device you want to connect to, you can skip the discovery process and use the Bluetooth Open Connection function to connect to the device directly.
Thank you & Best regards
syrpimp
=======================================================
“You must continue to gain expertise, but avoid thinking like an expert." -Denis Waitley

Similar Messages

Stop Bluetooth Discover while searching

Hello!
I try to make bluetooth connect window like "Add Bluetooth Device Wizard" in MS WINDOWS. I start from this:
It works well, i can see my devices, and devices disappear when i switch them off. searching time (or update time) 6 sec. in Add Bluetooth Device Wizard it is 10 sec. But i can't stop the search in this 6 sec, it just freezing for this time. In "Add Bluetooth Device Wizard" i can press on chosen device and it stop searching or i can press cancel button. Thank you, i'm new in LabVIEW.
P.S i don't know why but it makes only one search without flat sequence structure.

Hi timbak,
Actually what is wrong in your program is the sequence structure. This structure cannot be stopped until the code within is completely executed. So when you push the stop-button, first the code in the sequence is executed and then the loop is stopped.
Your code also doesn't make only one search but it displays only the last one because the indicator "device list" is in the loop. If you want to see the results of all iterations, it would be better if you used an auto-indexed tunnel and connect it with a 2-dimentional array of clusters where all the devices for every search are displayed, or you can simply use the Bluetooth discover function without a while loop (which I think is better).
There is a good example in LabVIEW that you can use. go to help >> find examples und in the NI Example finder you can either search the word "Bluetooth" or navigate to "Networking >> Bluetooth" and you will find the project "Simple Bluetooth.lvproj"
I hope this helps.
Best Regards
Maha

Satellite L300- 1AQ - Bluetooth tray application has stopped working

When i put my laptop on it comes up with an error which says:
*bluetooth tray application has stopped working*
A problem caused the problem to stop working correctly.
Windows will close the program and notify you if a solution is available.
Anyone got a solution?
The laptop is a Satellite L300- 1AQ
Only had it a month!!
Please help, thankyou
xx

Hi
Did you try to reinstall the Toshiba BT stack?
Usually this should help to get rid of this error message.
Here you can download the newest BT stack:
http://aps2.toshiba-tro.de/bluetooth/
Remove firstly the old BT software from the system and after new reboot install the BT downloaded from the Toshiba BT page.
Bye

Gif imagen dosen't work at o.s 6.0

The gif imagen in profile bbmsn contactas dosen't work in my torch 9800 os 6.0 all my friends that have got the os 6.0 have goy the same proble, i wanna know if there are or when is coming a update to solution this problem

Hi,
the problem whit NI 9223 module and the example that you talk about is know. Indeed, there is a CAR - Corrective Action Request - #30724 that deals with the erroneous implementation of the example.
To improve the code, the owner of CAR, suggest:
Added pipelining loops and removed from FPGA VI to Increase maximum acquisition rate and modified host VI to implement proper DMA FIFO programming practices.
I try to implement and improve the code. Bye
Mario

My wifi is greyed out my bluetooth n hotspot is not working and its showing problem in resetting all setting plez help.. :(

my wifi is greyed out ..my bluetooth n hotspot is not working and its showing problem in resetting all setting plez help..

Hello Prakharfromindia,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Wi-Fi settings grayed out or dim
http://support.apple.com/kb/ts1559
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/ht1414
Have a nice day,
Mario

When apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

when apple will fix the problem of the Bluetooth. It is not working after the upgrade to7.03

there is no problem with B/T and iOS7.0.3 in my case used on iPhone 5 and 4 in several environments including in car
Do a reset
restore with back up and if required as new

UBLR dosen´t work in an interfaces trunk?

I´m configuring Aggregate policer in a Sup720-3B, I need to configure Aggregate Policer in a Trunk interfaces, It´s required to limit the bandwidth for vlan to L2 through an interface trunk, between two catalyst. But it´s dosen´t work. The configuration that I am using is:
S6509#run int giga 3/2
Building configuration...
Current configuration : 167 bytes
interface GigabitEthernet3/2
switchport
switchport trunk encapsulation dot1q
switchport mode trunk
no ip address
service-policy input LIMIT
end
S6509#
S6509#show ip access-lists TRAFFIC
Extended IP access list TRAFFIC
10 permit ip any any
S6509#
S6509#show class-map Daniel
Class Map match-all Daniel (id 1)
Match access-group name TRAFFIC
S6509#
S6509#
S6509#show policy
S6509#show policy-map
Policy Map LIMIT
Class Daniel
police flow mask src-only 2000000 200000 conform-action transmit exceed-action drop
S6509#
S6509#
hostname S6509
boot system flash disk1:s72033-advipservicesk9_wan-mz.122-18.SXF14.bin
logging buffered 32768 debugging
logging rate-limit all 1000
enable secret 5 $1$Oewp$4FbojEBx0Nn.sXO1ZzhIj/
class-map match-all Daniel
match access-group name TRAFFIC
policy-map LIMIT
class Daniel
police flow mask src-only 2000000 200000 conform-action transmit exceed-action drop
S6509#show mls qos
QoS is enabled globally
Policy marking depends on port_trust
QoS ip packet dscp rewrite enabled globally
Input mode for GRE Tunnel is Pipe mode
Input mode for MPLS is Pipe mode
QoS Trust state is DSCP on the following interface
Gi3/4
Vlan or Portchannel(Multi-Earl) policies supported: Yes
Egress policies supported: Yes
----- Module [5] -----
QoS global counters:
Total packets: 233
IP shortcut packets: 0
Packets dropped by policing: 0
IP packets with TOS changed by policing: 0
IP packets with COS changed by policing: 0
Non-IP packets with COS changed by policing: 0
MPLS packets with EXP changed by policing: 0
S6509#
S6509#
S6509#show policy-map interface gigabitEthernet 3/2
GigabitEthernet3/2
Service-policy input: LIMIT
Class-map: Daniel (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: access-group name TRAFFIC
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
S6509#

Contact the wireless carrier to which the iPhone is locked and
ask that carrier if they provide unlocking and if you qualify.
What is the exact wording of any error message you receive?

LoadingSecondFile - Dosen't work

loadMovie() loads SWFs into _root.mc1.mc2, and I use the below method to be able to identify the selected movieclip. It works when I load the first SWF but when the second SWF is been loaded it dosen't work. What may be the cause for this.
I tried unloadMovie() and removeMovieClip() to clear the movieclip before loading the new file, but no success.
function traceName():Void {
     trace(this._name);
for (i=0; i<5; i++) {
    _root.mc1.mc2["color"+i].onRelease = traceName;

Thanks Ned. But I've got an array named mc
var mc:Array = [mc1, mc2, mc3];
I'm loading the below code as an external swf as well. Could that be causing this issue?
function traceName():Void {
     trace(this._name);
for (i=0; i<5; i++) {
    _root.mc1.mc2["color"+i].onRelease = traceName;

In I tunes I cant down load a CD. I get the message "The file couldn't be convereted. You don't have write access for you ITunes media folder or a folder with in it. To change permissions, ... When I do this it still dosen't work

In I tunes I can't down load a CD. I get the message "The file couldn't be convereted. You don't have write access for you ITunes media folder or a folder with in it. To change permissions, ... When I do this it still dosen't work.

Thanks C F McBlob but I recursively changed the permissions of my Music directory meaning every file and directory beneath it, as well as the directory itself, had the write permissions added.
I used "chmod -R u+w ./Music" and chmod -R g+w ./Music" to do it.
Alas, no cigar. :-(

Rocketfish Bluetooth Keyboard RF-BTKB2 not working under Windows 7 64 bit

Rocketfish Bluetooth Keyboard RF-BTKB2 not working under Windows 7 64 bit
Anyone had successs in this or another Bluetooth Keyboard after a bit of a struggle? What did you do to get it working? When I Add Device in Bluetooth it sees the keyboard but enlessly scans for it when I try to select and connect. The Rocketfish Bluetooth mouse worked just fine.

My friend, i have both, the bluetooth mouse and keyboard here that your talking about. and the keyboard was a struggle to pair with the windows 7 64 bit.... i think i spent 2 days working with it. and i didnt try anything special, i just kept trying to pair
it, and unplugging the dongle and working with it... and after a while. it worked... Lately though, i have been looking into getting a wired mouse and keyboard becuase of the delays and sleep time i have with my current keyboard(rocketfish). supposidly there
is a way around the delays but it disables all the options on your keyboard. IE the media buttons, and web browsing features. and my mouse keeps dieing off too....
Also, after researching these products more, i found that alot of people experienced similar problems with them, Being delays and mouse failure. Even with fresh batteries and all. The products werent meant to be used long term(2-3 years) for extensive use...
I dont know about you but i thinki paid 100 bucks for the pair so thats only 25 bucks a year... Which is kinda silly considering i coulda got a better one that wont cough up on me.
If anyone reading this finds a good wireless keyboard that doesnt delay, and a mouth that doesnt delay...(my biggest concern). Please mention it. i am very interested in.

When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.

When try to connect my iPod touch 4th gen to my house Wifi it won't connect, it used to work fine but now it dosen't work, but it does say that the internet is available, but when I tap on it it just loads. all other devices work fine.

Does the iOS device connect to other networks? If yes that tend to indicate a problem with your network.
Does the iOS device see the network?
Any error messages?
Do other devices now connect?
Did the iOS device connect before?
Try the following to rule out a software problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
.- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections
- Wi-Fi: Unable to connect to an 802.11n Wi-Fi network
- iOS: Recommended settings for Wi-Fi routers and access points
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem and it does not connect to any networks make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

Bluetooth is neither detected nor working. In the system preferences under BLUETOOTH header it says "No information found". Bluetooth icon is not appearing on desktop either. Please help.

Bluetooth is neither detected nor working. In the system preferences under BLUETOOTH header it says "No information found". Bluetooth icon is not appearing on desktop either. Please help.

Yes....It happens all the time. I also erased my HD and installed Snow Leopard but with no success. Tried lots of REBOOTING but nothing worked for me.As I have already installed the new OSX I think there is no need to go through the below procedure. What do you suggest?
Before you go through the ritual of reinstalling the entire system just try to do a "factory reset" of your bluetooth environment. To do this you need to run the Bluetooth Explorer which is a utility installed as part of XCode.
1. Launch Bluetooth Explorer.
2. Select the "Modify Software & Device Configuration" from the Utilities menu.
3. Keep the first 4 checkboxes checked (one will say "Full factory reset").
4. Click "Perform actions" button (lower right of window).
5. Reboot (possibly the Reboot NOW button will work, if not just do a normal reboot).
Hopefully that will clear your problem(s) so you can re-pair your bluetooth devices.
Good luck.

Apache in testing dosen't work

i install apache mysql and php in testing repo.
but apache dosen't work.
$ sudo /etc/rc.d/httpd start
:: Starting HTTP Daemon [FAIL]
$ sudo /usr/sbin/apachectl start
httpd: Syntax error on line 232 of /etc/httpd/conf/httpd.conf: Cannot load /usr/lib/apache/mod_access.so into server: /usr/lib/apache/mod_access.so: cannot open shared object file: No such file or directory
there is not mod_access.so. hwo to run appache daemon?
$ pacman -Ql apache | grep /usr/lib/apache/mod
apache /usr/lib/apache/mod_actions.so
apache /usr/lib/apache/mod_alias.so
apache /usr/lib/apache/mod_asis.so
apache /usr/lib/apache/mod_auth_basic.so
apache /usr/lib/apache/mod_auth_digest.so
apache /usr/lib/apache/mod_authn_anon.so
apache /usr/lib/apache/mod_authn_dbd.so
apache /usr/lib/apache/mod_authn_dbm.so
apache /usr/lib/apache/mod_authn_default.so
apache /usr/lib/apache/mod_authn_file.so
apache /usr/lib/apache/mod_authz_dbm.so
apache /usr/lib/apache/mod_authz_default.so
apache /usr/lib/apache/mod_authz_groupfile.so
apache /usr/lib/apache/mod_authz_host.so
apache /usr/lib/apache/mod_authz_owner.so
apache /usr/lib/apache/mod_authz_user.so
apache /usr/lib/apache/mod_autoindex.so
apache /usr/lib/apache/mod_cern_meta.so
apache /usr/lib/apache/mod_cgi.so
apache /usr/lib/apache/mod_dav.so
apache /usr/lib/apache/mod_dav_fs.so
apache /usr/lib/apache/mod_dbd.so
apache /usr/lib/apache/mod_deflate.so
apache /usr/lib/apache/mod_dir.so
apache /usr/lib/apache/mod_dumpio.so
apache /usr/lib/apache/mod_env.so
apache /usr/lib/apache/mod_expires.so
apache /usr/lib/apache/mod_ext_filter.so
apache /usr/lib/apache/mod_filter.so
apache /usr/lib/apache/mod_headers.so
apache /usr/lib/apache/mod_ident.so
apache /usr/lib/apache/mod_imagemap.so
apache /usr/lib/apache/mod_include.so
apache /usr/lib/apache/mod_info.so
apache /usr/lib/apache/mod_log_config.so
apache /usr/lib/apache/mod_log_forensic.so
apache /usr/lib/apache/mod_logio.so
apache /usr/lib/apache/mod_mime.so
apache /usr/lib/apache/mod_mime_magic.so
apache /usr/lib/apache/mod_negotiation.so
apache /usr/lib/apache/mod_proxy.so
apache /usr/lib/apache/mod_proxy_ajp.so
apache /usr/lib/apache/mod_proxy_balancer.so
apache /usr/lib/apache/mod_proxy_connect.so
apache /usr/lib/apache/mod_proxy_ftp.so
apache /usr/lib/apache/mod_proxy_http.so
apache /usr/lib/apache/mod_rewrite.so
apache /usr/lib/apache/mod_setenvif.so
apache /usr/lib/apache/mod_speling.so
apache /usr/lib/apache/mod_ssl.so
apache /usr/lib/apache/mod_status.so
apache /usr/lib/apache/mod_suexec.so
apache /usr/lib/apache/mod_unique_id.so
apache /usr/lib/apache/mod_userdir.so
apache /usr/lib/apache/mod_usertrack.so
apache /usr/lib/apache/mod_version.so
apache /usr/lib/apache/mod_vhost_alias.so

A bunch of modules have changed for apache 2.2 and got new names etc, therefore you have to edit httpd.conf, take look at http://httpd.apache.org/docs/2.2/new_features_2_2.html. For example, mod_access is now called mod_authz_host (with the new identifier authz_host_module, instead of access_module)

My password dosen't work in app store either game center !!

My password dosen't work in app store either game center , what is the problem?

Based on the numerous posts regarding iTunes and the App Store, there appears to be an issue at Apple's end. Apple has finally posted an update on the iCloud status page. https://www.apple.com/support/systemstatus/
Do not change your settings.

AppStore dosen't work in iOS 6

Since I updated to iOS 6, AppStore dosen't work properly.
When I tap on the Purchased tab, it load forever!
Everything else works.
Does anybody have the same issue?
Any Fix??

The following procedure partialy solved my problem.
Turn off Genius (Settings --> iTunes Store & App Store --> Apple ID --> Show Apple ID --> Turn Off Genius for Apps), quit the App Store (quick double klick Home button --> press &hold App Store --> tap "-"), turn Genius on, open the App Store.
After this procedure Featured, Charts and Genius started to work.
BUT Search STILL doesn't work :-(
good luck !

Bluetooth discover VI dosen't work !!

Similar Messages

Maybe you are looking for