Bluetooth gets disabled automatically

I use my E63 paired with my laptop and it synchronizes with outlook periodically. But quite often, bluetooth just turns off on it's own. I need to enable it again from phone. This used to happen in the shipped firmware, and even on the latest E63 Firmware.

Hi, You might need to check if the phone's visibility is set to a define period. Hope this helps. Regards, Nara

Similar Messages

SCE 2010 Subscriptions getting disabled automatically

Hi Experts,
we are using SCE 2010 server from last 4 years. Of late i have been noticing that the subscriptions are getting disabled automatically. i manually enabled it after which it sends alerts but after couple of minutes the subscriptions get disabled again.
The database and hard drive spacing is fine. Let me know what could be the possible issue as in the event log i haven't noticed any alerts with regards to this issue.
regards
abubakar
Md.Abubakar Noorani IT Systems Engineer Serco Ltd.

Hi,
When a subscription is created the user who created the subscriptions SID is associated with that subscription. There is a workflow that checks every half hour for SIDs no longer valid. They could be invalid because their accounts access that had been removed,
or possibly because the account has been disabled or deleted. I suggest you re-create the subscription with the current Admin.
Juke Chou
TechNet Community Support

Can location services get disabled automatically? Or does it always require a user to disable it?

Can location services get disabled automatically? Or does it always require a user to disable it?
I was repeatedly trying to Find my iPhone when it came up with "Location Services Disabled".
Later I was able to find my iPhone again. This has happend severally times lately?
Cold this happen automatically, like a "time out" function?

Can location services get disabled automatically? Or does it always require a user to disable it?
I was repeatedly trying to Find my iPhone when it came up with "Location Services Disabled".
Later I was able to find my iPhone again. This has happend severally times lately?
Cold this happen automatically, like a "time out" function?

AP Admin Status Getting Disabled Automatically After Upgrade to 7.4

Hi,
We were using wlan controller 5508 firmware 7.0.235 and decided to upgrade our firmware because we wanted to use some new AP models. We upgraded the controller to the 7.4.110.0 and after that a problem started. Some of the AP are becoming ADMIN DISABLED and they are getting down, this is happening all day and random times. I need to manually getting them admin enabled so we can use them. What can cause this problem?
This happens in APs in Flexconnect mode.
Regards.
Wlan Cont
AIR-CT5508-K9

Problem happens with these AP : AIR-LAP1041N-E-K9
We have many AP it is very difficult which AP to debug, everytime different AP is getting disabled. I've also configured syslog but also I do not receive any syslog message to my syslog server. Should I upgrade to 7.5?
Log from AP after disabled...
    Console logging: level debugging, 39 messages logged, xml disabled,
                     filtering disabled
    Monitor logging: level debugging, 0 messages logged, xml disabled,
                     filtering disabled
    Buffer logging: level debugging, 39 messages logged, xml disabled,
                    filtering disabled
    Exception Logging: size (4096 bytes)
    Count and timestamp logging messages: disabled
    Persistent logging: disabled
    Trap logging: level emergencies, 12 message lines logged
        Logging to 10.0.2.47 (udp port 514, audit disabled,
              link down),
              0 message lines logged,
              0 message lines rate-limited,
              0 message lines dropped-by-MD,
              xml disabled, sequence number disabled
              filtering disabled
        Logging Source-Interface:       VRF Name:
Log Buffer (1048576 bytes):
*Mar 1 00:00:10.770: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:10.773: *** CRASH_LOG = YES
*Mar 1 00:00:11.073: Port 1 is not presentSecurity Core found.
Base Ethernet MAC address: D8:67:D9:FC:00:D6
*Mar 1 00:00:12.424: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:13.507: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:14.518: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:16.503: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C1040 Software (C1140-K9W8-M), Version 15.2(2)JB2, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2013 by Cisco Systems, Inc.
Compiled Mon 29-Jul-13 12:06 by prod_rel_team
*Mar 1 00:00:16.503: %SNMP-5-COLDSTART: SNMP agent on host Antalya is undergoing a cold start
*Mar 1 00:00:16.570: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:00:17.567: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 00:00:28.630: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
*Mar 1 00:00:28.632: %LWAPP-3-CLIENTERRORLOG: LWAPP LED Init: incorrect led state 255
*Mar 1 00:00:28.633: bsnInitRcbSlot: slot 1 has NO radio
*Mar 1 00:00:28.657: %CAPWAP-3-ERRORLOG: Binding Config Initialization failed for binding 1
*Mar 1 00:00:29.190: Starting Ethernet promiscuous mode
*Mar 1 00:00:29.396: %SSH-5-ENABLED: SSH 2.0 has been enabledlwapp_crypto_init: MIC Present and Parsed Successfully
*Mar 1 00:00:44.681: Logging LWAPP message to 10.0.2.47.
*Mar 1 00:01:03.711: %CAPWAP-3-ERRORLOG: Could Not resolve CISCO-CAPWAP-CONTROLLER
*Mar 1 00:01:13.713: %CAPWAP-3-ERRORLOG: Selected MWAR 'COLINS-WLC'(index 0).
*Mar 1 00:01:13.713: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Aug 21 08:32:29.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.10.10.10 peer_port: 5246
*Aug 21 08:32:30.063: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.10.10.10 peer_port: 5246
*Aug 21 08:32:30.063: %CAPWAP-5-SENDJOIN: sending Join Request to 10.10.10.10
*Aug 21 08:32:35.063: %CAPWAP-5-SENDJOIN: sending Join Request to 10.10.10.10
*Aug 21 08:32:35.154: Starting Ethernet promiscuous mode
*Aug 21 08:32:37.005: %LWAPP-4-CLIENTEVENTLOG: OfficeExtend Localssid saved in AP flash
*Aug 21 08:32:37.025: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to administratively down
*Aug 21 08:32:37.224: %CAPWAP-5-JOINEDCONTROLLER: AP has joined controller COLINS-WLC
*Aug 21 08:32:37.273: %LWAPP-4-CLIENTEVENTLOG: No Flex ACL map configuration file to load. Connect to controller to get configuration file
*Aug 21 08:32:37.275: %LWAPP-4-CLIENTEVENTLOG: No Flex ACL map configuration file to load. Connect to controller to get configuration file
*Aug 21 08:32:37.275: %LWAPP-4-CLIENTEVENTLOG: No LS Flex ACL map configuration file to load. Connect to controller to get configuration file
*Aug 21 08:32:37.276: %LWAPP-4-CLIENTEVENTLOG: No Central Dhcp map configuration file to load. Connect to controller to get configuration file
*Aug 21 08:32:37.279: ac_first_hop_mac - IP:192.168.31.1 Hop IP:192.168.31.1 IDB:BVI1
*Aug 21 08:32:37.279: Setting AC first hop MAC: 0024.14d9.f118
*Aug 21 08:32:37.965: %WIDS-6-ENABLED: IDS Signature is loaded and enabled
*Aug 21 08:32:47.905: %CDP_PD-4-POWER_OK: Full power - LOW_POWER_CLASSIC_NO_INJECTOR_CONFIGURED inline power source

Automatic tester user gets disabled in ISE

We have ise1.2 working in our environment. For some reason the radius test user used for NAD device authentication gets disabled automatically. Though i couldnt get the frequency of it neither the timing of it. Any specific setting i am missing here to check or configure in NAD or in ISE?

Hi Manmohan,
In ISE there is an option which Specifies the number of times Cisco ISE records incorrect administrator passwords before locking the administrator out of Cisco ISE, and suspending or disabling account credentials.
Can you check if there is any such password policy enabled for your radius user, and that might be getting locked/disabled after certain number of wrong tries.

Users getting disabled during Synchronization

Hi All,
We are running Plumtree 5.0.2 in Windows Environment under Tomcat and also used Sample Application "Auth_HelloWorld-Java" as the base and modified it as per the current needs for Authentication and Synchronization. When I run the Synchronization under "Partial Users Synchronization" all the groups and users get imported correctly for the first time. When it is run again the users which were imported during the first run gets disabled automatically and they need to be enabled manually. This is putting us under lots of issues as the number of users are getting more.
Please do let me know how this can be solved.
Thanks , Raghu

Raghu,
I appologize for the delayed response, our notification seem to have been down over the weekend.
In so far as the problems you are having, the only reason that the users would get disabled is that they are not members of a group in the "Fully Synchronized Group List". This list is in the Authentication Source Editor, and should contain the groups from your remote Authentication Source that should be synchronized with the portal. Only users that are members of a group specified in that list will be imported.
Do you have any groups choosen?
Thanks,Akash

Internet Information Services (IIS) becomes Disabled automatically on SCCM 2012 Distribution Points

Hi !
Internet Information Services (IIS) is getting Disabled automatically on all of our SCCM 2012 Distribution Points.
Please help and share configuration steps.
Thank you.

This is not anything ConfigMgr is doing. The cases I've seen similar to this have had a GPO responsible for this behavior from which the site systems needed to be excluded.
Jason | http://blog.configmgrftw.com | @jasonsandys

FORCE LOGGING disabled automatically?

Hi,
This is just strange that on a couple of my 11.2.0.3 dataguard environments on Oracle Linux 6 (64 bit) was found FORCE LOGGING disabled and I just enabled them. Now DBA team remembers correctly that FORCE LOGGING is always enabled while configuring the dataguard. I would like to have opinion from someone if he/she has this kind of scenario with him/her. Is there any way that FORCE LOGGING could get disabled automatically? We never re-created controlfile on primary or standby, but, we have switchover/failover scenarios which are not supposed to disturb FORCE LOGGING?
Or did we really forget to enable FORCE LOGGING?
Salman
<Moderator Edit - deleted link spam - pl see FAQ on where to include signature links - abuse reported to Admins>

Hi Salman,
Can you check the database alert log from the time when it was enabled first time.
Alert log will have completed information on what and when any command was run to disable it.
HTH,
Pradeep

Satellite L650 - Bluetooth switches on automatically

I'm using Toshiba Satellite L650-I5310. It hav a shortcut key for bluetooth enable/disable. whenever i disable the bluetooth, after a few seconds it again enables automatically.
plz help me how to get rid of this problem.
Sumit(India)

Hi sumit_king7,
What short key you are using exactly for disabling Bluetooth?
As far as I know you can do this using FN+F8 key combination.
Alternative I would recommend updating the Bluetooth software. Just look on the Toshiba Bluetooth portal to download the newest version.
And before you install it, remove the old version first and restart the notebook.

Cannot disable automatic attachment preview in Mavericks Mail?

Hello All,
I noticed after upgrading to Mavericks that Apple Mail started automatically previewing attachments again... I had disabled this in previous versions of OS X. I tried to disable this again in the terminal using:
defaults write com.apple.mail DisableInlineAttachmentViewing -bool yes
But after re-starting Mail, attachments are being automatically previewed again.
I consider this a security issue so I would like to disable automatic attachment previewing as soon as possible. Has anyone been able to do this with the Mail included with Mavericks yet?

Just a basic examplo: getting an email with an open image, that the 2 people around me can immediately see, can pose a serious security for anything I'm doing with my Mac!
So, you see, SECURITY is much more than a mere technical problem!
Cheers
That's a privacy problem, not a security problem.
If you are receiving images in emails that the others arround you are not qualified to see, your office setup is the security problem, not Mail.
Use a different email client that gives you the option. I have no idea what those are, though.

How do I disable automatic downloading?

When I am on iTunes,files that I have already purchased and downloaded automatically begin downloading out of nowhere. It gets very annoying, and I would like to know how to disable automatic downloading.

Which operating system are you using?

WiFi Profile keeps getting disabled

I'm always having issues where the WiFi profile gets disabled.
My school has a number of access points all with the same connection info and so I should be able to connect onto all the different access points seemlessly, however, it seems to get disabled a lot especially when I'm in an area of poor reception, or when I'm moving from one access point to another. It is extremely frustrating because I have to keep manually clicking on the profile, and then re-enabling it. I already have "Allow inter access point handovers" enabled. I've tried with IP 6 on and off, doesn't make a difference. I had the same issue on my Playbook as well. There are a number of other people having problems as well as seen here on CrackBerry.http://forums.crackberry.com/blackberry-10-os-f269/saved-wifi-network-keeps-disabling-itself-774078/ As people have mentioned, this is likely due to the algorithm used by BlackBerry to prevent battery drain, but clearly it's causing the connection to stay dead. Especially for connections that have ever connected successfully, it would be good for the phone to keep trying every 5 or 10 minutes, or maybe try and figure out what cell-towers might be connected to the WiFi so if you are within a certain area, it will know to keep trying. For the mean time, there should definitely be an option in the menu to quickly and easily re-enable the wifi profile.(e.g. with the long press/right side menu, or maybe even have an option at the bottom of the profile list.)

Subject: Wi-fi Connection Drops and Disables wifi radio on TP-LINK 470N Router(Single Band - 2.4GHz)(Home Connection)
Hello,
I am Jay Panchal
Recently i owned BlackBerry z10 and Having Latest firmware upgrade version: 10.2.1.2102 Update.
I am Using Wi-fi Connection to connect internaet to my phone but since i h'd started using BlackBerry z10 it constantly drops connection with Home Router wifi furthermore it also disables wifi radio so other device connect ed to that router even make disconnected to router. Solution is to that problem is i have to restart my router every time.
I tried to change following changes to my router:
Mode: From 11bgn mixed to 11n only
Enabled SSID Broadcast
Wireless Security: From WAP-Personal to WAP2-Personal
Beacon Interval: From 100 to 50
RTS Thresold: From 2346 to 2304
I h'd made Address Reservation of my phone to router.
Note: My Router has Latest Firmware Version:3.16.6 Build 130529 Rel.47286n (H/W Version WR740 v4.0000)
I am using Sony Xperia Acros, HP ProBook 4440s, Sony Vaio Laptop Devices Parallely, Either of any h'd not problem with connection drop out until.
So, I request you to Help me out any from this situation.
Ant Modification/ Changes/ Suggestion are Welcomed.
My Router Setting:
Wireless Radio:   Enable
Name (SSID):   XXXXXXXXX
Channel:   Auto (Current channel 11)
Mode:   11n only
Channel Width:   20MHz
MAC Address:   XX-XX-XX-XX-XX-XX
WDS Status:   Disable
Beacon Interval : 50
RTS Threshold: 2304
Fragmentation Threshold: 2346 (Fixed)
DTIM Interval: 1
WMM Enabled
AP Isolation Disabled
WAN Connection Type: PPPoE (Connect Automatically)
Settings on phone:
Enable Connections
Hidden SSID off
Security Type WPA/WPA- Personal
VPN Profile <None Selected>
Band Type 2.4GHz
Auto Obtain IP - On
Using Auto-IP - Checked
IPv6 Disabled
Proxy Disabled
Inter-Access point Handover - On
Please help me to rid out this situation.
Thanking You.
Have a Nice Day
Regards - Jay Panchal

IE, Disable 'Automatically Detect Settings' Via GPO

Hi guys,
We have recently been having a small problem with IE, whereby the 'automatically detect settings' check box will get ticked - resulting in our users not being able to traverse our proxy server.
I use the User Configuration > Policies > Windows Settings > IE Maintenance > Connection to set up our proxy settings, however I can't see an option to explicitly disable the 'automatically detect settings' check box.
Is this located somewhere else in an admin template, or am I simply missing an option that is right in front of me?
Thanks.
Glen

here is a script that does the trick: source
http://www.craig-tolley.co.uk/2011/08/30/disable-automatically-detect-settings-in-internet-explorer/
Option Explicit
On Error Resume Next
'Create a constant for the HKEY_CURRENT_USER object
Const HKCU = &H80000001
'Define variables
Dim strComputer
Dim strRegistryKey
Dim objRegistry
Dim strRegistryValue
DIm binValue
strComputer = "."
strRegistryKey = "Software\Microsoft\Windows\CurrentVersion\Internet Settings\Connections"
strRegistryValue = "DefaultConnectionSettings"
'Connect to the Registry
Set objRegistry = GetObject("winmgmts:\\" & strComputer & "\root\default:StdRegProv")
'Retrieve the current settings.
objRegistry.GetBinaryValue HKCU, strRegistryKey, strRegistryValue, binValue
'Change the 'Automatically detect settings' box to unticked
binValue(8) = 05
'binValue(8) = 13 - Enable this line to check the box instead of uncheck
'Save the changes
objRegistry.SetBinaryValue HKCU, strRegistryKey, strRegistryValue, binValue

How do I disable automatic updates?

I am going to have to use Firefox version 28 forever, exposing myself to many security risks in the process, because I do not like the drastic redesign of the interface in version 29 and Mozilla have not included an option to switch to the old interface.
Many support forum posts argue that bringing back the old interface is a 'simple' matter, but it is not. I have spent many hours on two PCs so far, fiddling with the recommended third-party add-ons (e.g. Classic Theme Restorer) in the attempt to get the browser looking the old way again. I can ascertain with confidence that it is NOT possible to get things looking exactly as they did before, and certainly not looking like the particular customized setup I had myself.
I have now re-installed version 28, and intend to continue using it indefinitely. However, automatic updates are still enabled, and Firefox has already tried to update itself to version 29 again. How can I disable automatic updates for good? I have tried some tricks like deleting the update files and then removing the update URL in about:config, but a new update was still downloaded somehow.
How can I nix automatic updates for good?

Hi,
It is true that the Classic Theme Restorer add-on will NOT bring back all of your customized settings/appearance on Firefox 28, but it will help a little It's recommended that you stay on the latest version to receive the latest security fixes and bug patches but you're free to downgrade if you want.
You can set these prefs in <code>about:config</code> to disable automatic updating:<br>
app.update.auto - false<br>
app.update.enabled - false<br>
app.update.silent - false<br>

TS3660 How To Disable Automatic Login

How To Disable Automatic Login

It is your only option if you want to get rid of that other user account. It seems the system is Hard Set to boot to that account. How and why I have not Idea but the first thing you should of done was Restoring it to the Original OS, if it was not Mt Lion to begin with, in doing so getting rid of all other accounts and files from that other account.
Time to Bit the Bullet and Erase the drive completely and reinstall the original shipping version of OS X on that system.
Anton Mironenko wrote:
Reinstalling the OS would be too extreme. I already have many programs installed, and I tuned a lot of params. Data migration is another pain.
I hope, it is possible to solve this issue in another way.

Bluetooth gets disabled automatically

Similar Messages

Maybe you are looking for