"bluetooth not available" but I don't have wireless devices & don't need it
don't have wireless devices yet can't do icq or open some files or games as it says "bluetooth module not found" THERE NEVER WAS A MODULE ON MY COMPUTER. From what i have been reading, one of the updates tells you bluetooth is not found, but since I never had it and don't want it, I see no reason why I should "buy it anyway" (suggested) or take my computer in to the Apple store and likely have to pay to have a problem fixed they caused. Any help, suggestions would really be appreciated. Thanks
iMac Mac OS X (10.3.9)
Thanks for replying so quickly Dean!
Sorry my mistake. It reads:
NO BLUETOOTH HARDWARE FOUND
In order to use this application, you must have a Bluetooth module. Please verify that your Bluetooth hardware is properly attached to the computer.
This message comes up when I try to execute "icq5_setup.exe", when I try to open downloaded games, some of which are "_Setup-dm.exe", others are "Setup-dm.exe", "-dm.exe" and "Demo.dmg".
The issue is this: I have no wireless devices and have no plans of obtaining any. It would appear my computer did not have Bluetooth installed when it was new. (when I got it) One day my computer was working fine, then for no discernable reason this message would come up and stop me from opening setups and new games. How do I tell my computer that I don't have any wireless devices and these are what they are? It seems to be confused at what task it is being asked to perform. It seems redundant to have to buy a module to fix the problem. Thanks.
Kaz
iMac Mac OS X (10.3.9)
Similar Messages
-
How do I upload the contacts from my iPhone 5S to the Bluetooth device on my Toyota RAV4? The car manual says to consult the phone's Bluetooth instruction manual, but I don't have a manual for that.
That is very strange... I wonder if it has something to do with the firmware or some sort of error. I haven't ran into this but at the shop I work at I've ran into several firmware errors on iPhone 4 all the way through the 5s. Maybe its something as simple as putting a different part of the code into iTunes... I know you can something of this extent. I would look up error 1669, I know you have tried a number of things but look it up on the forum and see what fixes are available so that you may be able to restore it properly without all this garbage you are running into. Just a thought for you.
-
I am current in Sotheby's Africa and trying to FaceTime my daughter who also has the same ipad as me. My son in law also has the ipad. Despite using my daughters email, I cannot get through to her or my son in law. When I hit FaceTime I can hear the ringing tone, but after a while it comes up saying my daughter is not available, but she is sat by her ipad in the UK. I have checked everything is working so what can I do now to get through to her, especially for Xmas day.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Cheers, Tom -
They sent me a serial number for a windows version of PS Elements when I ordered a mac version. The serial number doesn't work, not surprisingly, but they don' t seem to care. I have tried the chat line and have waited for almost a day with no response. What should I do?
Look here
Order product | Platform, language swap -
I have Microsoft Office within my user name, but it is not available for the other 2 users. What do I need to do to allow them access to the software?
http://answers.microsoft.com/en-us/mac/forum/macoffice2011-macstart/how-do-i-ena ble-office-for-all-users-on-one-mac/38bd94cc-d26c-41c9-8471-ee87d63ebfc9?msgId=0 fbd6314-a12a-4fed-85f9-d939208095ff
-
It says I have rentals that have not expired but I don't have any rentals. What does that mean?
Ummm you probably haven't watched it yet. You have 30 days to watch a rental before it expires.... 24h after you start to watch it though.
-
i am having problems with my new ipad that i got for Christmas today, i don't get free wi-fi at my home and it said if the wi-fi is not available, connect to itunes. i have done that and it didnt help me. mind helping me out?
Further info - I changed my security settings to allow apps from anywhere, and again tried to install. I again got an error message
that the update failed to install, and to contact Customer Support. -
IMac takes 4 minutes to boot up, bluetooth not available
Hello, this is my first post on Apple Discussions!
The day before yesterday we had quite a vicious storm here and lost power for about a minute. My Mac was switched on when the power cut out, but I was downstairs, having some lunch. Unfortunately, I have no surge protection on my power bar / extension cord thing (I know...). I immediately unplugged it, only turning it back on after the storm had calmed down.
Thinking nothing of it, I powered on my Mac and left it unattended for about 10 minutes (so I don't know how long it took to boot up!). When I came back, I was greeted by the login screen and proceeded as usual. However, the next time I powered on my computer, I could not get past the white screen after the chime (no Apple logo). Now, this has happened to me before, so I waited a couple of minutes. Nothing. I decided to power it down (holding down the power button) and try rebooting it, this time holding down the option key (to bring up the partitions), as this has helped me in the past. White screen for a couple of minutes. Impatient and annoyed, I powered it down again. Rebooted holding down the shift key, for Safe Mode. Nothing again. This time I left it on the white screen while I looked for an old USB keyboard, thinking my wireless keyboard might not have been pairing. Little did I know I would have to use this sh***y keyboard from this point forward.
So, I got my keyboard (remember I had left my Mac on the white screen) and when I returned I was pleasantly surprised to see the login screen. I noticed, however, that I could not use my wireless keyboard (I have a wired Razer mouse). So I plugged in the old PC keyboard I found, and logged in. Which is when I noticed the Bluetooth icon was strange; it was greyed out and had a jagged line through it, and when I clicked on it, said "Bluetooth: Not Available".
I restarted my Mac, just to see if the issues would be fixed. Nope. It took about four minutes to start up, and no Bluetooth. I checked the System Preferences and it says there is "No Bluetooth Hardware Found". "No information found" in System Information either.
The problem is that during the white screen on bootup (I always hear the chime btw), I have no control. I cannot enter Safe Mode, see the partitions, reset the NVRAM or PRAM. I just have to wait until I see the Apple logo after about four minutes. After login, everything (bar Bluetooth) seems fine. I have verified disk, and it says it's fine. Verified and repaired permissions as well. I looked and noticed that I have no com.apple.bluetooth.plist file in my library.
I don't know what to do from here! My extended Apple Care has expired Should I install Mavericks? Could that fix my problems? Or should I clean install ML, and then install Mavericks? But if the storm did do some damage, the issue is probably hardware... Please help me.
Thanks, and sorry for the length
PS. I have been having a little trouble with my finder since a while now (months). Sometimes, when I open a folder the CPU will shoot up to 100% and the Mac would freeze for a couple of seconds. Then it would be normal again. I have used up about 1.5 TB (including a Bootcamp partition) from my 2TB HDD. I doubt this is related, but I though I'd throw it in anyway. Again, I apologise for the length.Installing a new OS X over a problematic one will get you a new problematic OS X.
I suggest you run repair disk first. Then I would reset the SMC.
I "think" that some of your problems stem from the power problem you described. No surge protector is akin to (fill in the negative outcome blank). The lecture ends here.
IMHO, you have some hardware problem(s). I suggest you take the computer to an Apple store for diagnosis. Be sure to bring your documentation of the things above along.
Barry -
I got a early 2008 MAC PRO with additional wireless keyboard and mighty mouse few weeks ago.
Recently I keep encountering the "bluetooth not available" problem after software update (system reboot) if I have USB devices attached to the MAC PRO. Also, if I connect the Logitech quickcam ultravision directly to the MAC PRO, the bluetooth will have "not available" error after system reboot. If I connect the quickcam to the USB HUB, the problem won't happen.
This error happened again when I install the new Safari update while I have the keyspan USB-to-Serial connected to the MAC PRO.
I have all the latest updates installed in my MAC PRO. I don't know what happened, but I hope this problem can be fixed so that I don't have to keep unplugged all my USB equipment if I need to reboot my MAC PRO.Hi there,
I just had the exact same thing happen! I had my usb 2 flash stick and MyBook 320HD only. I then noticed that the MyBook wouldn't sleep even though the Mac was shut down. I had to force shut off the drive by removing the power lead. I restarted the Mac with no usb whatsoever and voila! All is now ok.. I wonder if this is connected with the motherboard power management?? -
Bluetooth Not Available 10.7.2 2011 Intel iMac
Hi Guys,
I need a little advice whether I have a software issue or Hardware issue with my (May 2011) intel iMac (27")
When I got the new iMac I migrated from old iMac with Snow Leopard and had no bluetooth issues at all.
I upgraded to Lion in July and Bluetooth was OK, 10.7.1 update seemed ok until 2/3 weeks ago, 10.7.2 has had no fix.
This is the problem:
I have an Apple BT Keyboard, BT Magic Mouse & BT Magic Trackpad connected... all was ok untl 2/3 weeks ago.
Currently on the 'top bar' if I click on the BT icon, it says "Bluetooth: Not Available" ...... The BT icon itself has a 'jagged line' through it.
Bluetooth is not shown under System Preferences.. as if it does not appear on my iMac
Also if I check under 'System Information' and click on Bluetooth it says "No Information Found"
I have reset the PRAM and SMC & Verified and repaired HD several times.... all to no avail.
I have favourited the BT devices to the iMac allowed them to wake iMac etc, but does not offer a fix.
Over the last few days it magically comes back on for a while then cuts dead in the middle of 'work'.
What should my next step be?
Thank you very much in advance for any advice offered.
PS:
I have checked the Console.App and have a Kernel log file with these 'panics', I admit this log is way beyond me but if anyone understands it, I'd be grateful:
Oct 11 19:47:17 -imac kernel[0]: [SendHCIRequestFormatted] ### ERROR: [0x0804] (Exit Sniff Mode) -- Send request failed (err = 0x000Cƒ (kBluetoothHCIErrorCommandDisallowed))
Oct 11 19:48:48 imac kernel[0]: E:[AppleUSBBluetoothHCIController][StartBulkPipeRead] ClearPipeStall failed with error 0xe00002ed.
Oct 11 19:48:48 jimac kernel[0]: E:[AppleUSBBluetoothHCIController][BulkInReadHandler] Received kIOReturnNotResponding error - retrying: 1.
Oct 11 19:48:48 imac kernel[0]: E:[AppleUSBBluetoothHCIController]WARNING !!!! [DeviceRequestCompleteHandler] error e000404f -- kIOUSBPipeStalled
Oct 11 19:48:52imac kernel[0]: [[0xffffff801b49a000] OpCode 0x0C3F from: blued (577) status: 0x00 state: 2 timeout: 4321] Bluetooth warning: An HCI Req timeout occurred.
Oct 11 19:48:52 kernel[0]: [SendHCIRequestFormatted] ### ERROR: [0x0C3F] (Set AFH Host Channel Classification) -- Send request failed (err = 0x0010 (kBluetoothHCIErrorHostTimeout))
Oct 11 19:48:52 -imac kernel[0]: E:[AppleUSBBluetoothHCIController]WARNING !!!! [DeviceRequestCompleteHandler] error e00002ed -- kIOReturnNotResponding
Oct 11 19:49:00 -imac kernel[0]: E:[AppleUSBBluetoothHCIController][SendACLData] Bulk out [ACL] data failed. (error = 0xe000404f )
Oct 11 19:49:00-imac kernel[0]: E:[AppleUSBBluetoothHCIController][BulkOutWriteCompleteHandler] ERROR2: 0xe000404f; sizeRem=00000009; isInactive = 0, suspended = 0
Oct 11 19:49:01 -imac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Oct 11 21:37:08 -imac kernel[0]: [SendHCIRequestFormatted] ### ERROR: [0x0804] (Exit Sniff Mode) -- Send request failed (err = 0x000C (kBluetoothHCIErrorCommandDisallowed))
Oct 11 22:57:37 -imac kernel[0]: The USB device Bluetooth USB Host Controller (Port 1 of Hub at 0xfa110000) may have caused a wake by issuing a remote wakeup (3)
Oct 11 22:57:44 -imac kernel[0]: [SendHCIRequestFormatted] ### ERROR: [0x0804] (Exit Sniff Mode) -- Send request failed (err = 0x000C (kBluetoothHCIErrorCommandDisallowed))
Oct 11 22:59:29-imac kernel[0]: E:[AppleUSBBluetoothHCIController][BulkInReadHandler] Received kIOReturnNotResponding error - retrying: 1.
Oct 12 02:00:21 -imac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Oct 12 05:15:32 -imac kernel[0]: E:[AppleUSBBluetoothHCIController][StartBulkPipeRead] ClearPipeStall failed with error 0xe000404f.
Oct 12 05:15:32 imac kernel[0]: E:[AppleUSBBluetoothHCIController][BulkInReadHandler] Received kIOReturnNotResponding error - retrying: 1.
Oct 12 05:15:32 -imac kernel[0]: E:[AppleUSBBluetoothHCIController]WARNING !!!! [DeviceRequestCompleteHandler] error e00002ed -- kIOReturnNotResponding
Oct 12 05:15:39 -imac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Oct 12 05:16:32 -imac kernel[0]: E:[AppleUSBBluetoothHCIController][StartBulkPipeRead] ClearPipeStall failed with error 0xe000404f.
Oct 12 05:16:32 -imac kernel[0]: E:[AppleUSBBluetoothHCIController][BulkInReadHandler] Received kIOReturnNotResponding error - retrying: 1.
Oct 12 05:16:32 -imac kernel[0]: E:[AppleUSBBluetoothHCIController]WARNING !!!! [DeviceRequestCompleteHandler] error e00002ed -- kIOReturnNotResponding
Oct 12 05:16:33 -imac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Oct 12 06:20:47 -imac kernel[0]: E:[AppleUSBBluetoothHCIController][StartBulkPipeRead] ClearPipeStall failed with error 0xe000404f.
Oct 12 06:20:47 -imac kernel[0]: E:[AppleUSBBluetoothHCIController][BulkInReadHandler] Received kIOReturnNotResponding error - retrying: 1.
Oct 12 06:20:47 -imac kernel[0]: E:[AppleUSBBluetoothHCIController]WARNING !!!! [DeviceRequestCompleteHandler] error e00002ed -- kIOReturnNotResponding
Oct 12 06:20:54 -imac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Oct 12 08:04:58 -imac kernel[0]: The USB device Bluetooth USB Host Controller (Port 1 of Hub at 0xfa110000) may have caused a wake by being disconnected
Oct 12 08:04:58 -imac kernel[0]: E:[AppleUSBBluetoothHCIController][StartBulkPipeRead] ClearPipeStall failed with error 0xe00002ed.
Oct 12 08:04:58 -imac kernel[0]: E:[AppleUSBBluetoothHCIController][BulkInReadHandler] Received kIOReturnNotResponding error - retrying: 1.
Oct 12 08:04:58 -imac kernel[0]: E:[AppleUSBBluetoothHCIController]WARNING !!!! [DeviceRequestCompleteHandler] error e000404f -- kIOUSBPipeStalled
Oct 12 08:05:02-imac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Oct 12 08:05:42 -imac kernel[0]: E:[AppleUSBBluetoothHCIController][StartBulkPipeRead] ClearPipeStall failed with error 0xe00002ed.
Oct 12 08:05:42 -imac kernel[0]: E:[AppleUSBBluetoothHCIController][BulkInReadHandler] Received kIOReturnNotResponding error - retrying: 1.
Oct 12 08:05:42-imac kernel[0]: E:[AppleUSBBluetoothHCIController]WARNING !!!! [DeviceRequestCompleteHandler] error e000404f -- kIOUSBPipeStalled
Oct 12 08:05:46-imac kernel[0]: [[0xffffff80128dc000] OpCode 0x0C3F from: blued (230) status: 0x00 state: 2 timeout: 4321] Bluetooth warning: An HCI Req timeout occurred.
Oct 12 08:05:46-imac kernel[0]: [SendHCIRequestFormatted] ### ERROR: [0x0C3F] (Set AFH Host Channel Classification) -- Send request failed (err = 0x0010 (kBluetoothHCIErrorHostTimeout))
Oct 12 08:05:46 -imac kernel[0]: E:[AppleUSBBluetoothHCIController]WARNING !!!! [DeviceRequestCompleteHandler] error e00002ed -- kIOReturnNotResponding
Oct 12 08:05:54 -imac kernel[0]: E:[AppleUSBBluetoothHCIController][BulkOutWriteCompleteHandler] ERROR2: 0xe000404f; sizeRem=00000009; isInactive = 0, suspended = 0
Oct 12 20:35:12 -imac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Oct 12 20:39:13 -imac kernel[0]: [IOBluetoothHIDDriver][getDevicePropertiesWL][c8-bc-c8-fb-60-e8] Error retrieving device properties.
Oct 12 20:39:13 -imac kernel[0]: [IOBluetoothHIDDriver][probe] Couldn't retrieve device properties
Oct 12 20:47:09 -imac kernel[0]: [IOBluetoothHIDDriver][getDevicePropertiesWL][10-9a-dd-99-3b-5f] Error retrieving device properties.
Oct 12 20:47:09 -imac kernel[0]: [IOBluetoothHIDDriver][probe] Couldn't retrieve device properties
Oct 12 20:57:34 -imac kernel[0]: E:[AppleUSBBluetoothHCIController][BulkInReadHandler] Received kIOReturnNotResponding error - retrying: 1.
Oct 12 20:58:35 -imac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Oct 12 20:59:50 -imac kernel[0]: [SendHCIRequestFormatted] ### ERROR: [0x0804] (Exit Sniff Mode) -- Send request failed (err = 0x000C (kBluetoothHCIErrorCommandDisallowed))
Oct 12 21:04:13 localhost kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Oct 12 21:24:57 localhost kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Oct 13 00:14:12 localhost kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Oct 13 03:03:01 localhost kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Oct 13 08:31:58 -imac kernel[0]: The USB device Bluetooth USB Host Controller (Port 1 of Hub at 0xfa110000) may have caused a wake by issuing a remote wakeup (3)
Oct 13 08:34:47 -imac kernel[0]: E:[AppleUSBBluetoothHCIController][BulkInReadHandler] Received kIOReturnNotResponding error - retrying: 1.
Oct 13 08:34:48 -imac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Oct 13 09:14:44 -imac kernel[0]: E:[AppleUSBBluetoothHCIController][StartBulkPipeRead] ClearPipeStall failed with error 0xe000404f.
Oct 13 09:14:44-imac kernel[0]: E:[AppleUSBBluetoothHCIController][BulkInReadHandler] Received kIOReturnNotResponding error - retrying: 1.
Oct 13 09:14:44 -imac kernel[0]: E:[AppleUSBBluetoothHCIController]WARNING !!!! [DeviceRequestCompleteHandler] error e00002ed -- kIOReturnNotResponding
Oct 13 09:14:49 -imac kernel[0]: [[0xffffff80140df000] OpCode 0x0C3F from: blued (50) status: 0x00 state: 2 timeout: 4321] Bluetooth warning: An HCI Req timeout occurred.
Oct 13 09:14:49-imac kernel[0]: [SendHCIRequestFormatted] ### ERROR: [0x0C3F] (Set AFH Host Channel Classification) -- Send request failed (err = 0x0010 (kBluetoothHCIErrorHostTimeout))
Oct 13 09:14:49-imac kernel[0]: E:[AppleUSBBluetoothHCIController]WARNING !!!! [DeviceRequestCompleteHandler] error e00002ed -- kIOReturnNotResponding
Oct 13 09:14:56 -imac kernel[0]: E:[AppleUSBBluetoothHCIController][SendACLData] Bulk out [ACL] data failed. (error = 0xe000404f )
Oct 13 09:14:56 -imac kernel[0]: E:[AppleUSBBluetoothHCIController][BulkOutWriteCompleteHandler] ERROR2: 0xe000404f; sizeRem=00000009; isInactive = 0, suspended = 0
Oct 13 09:14:57-imac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Oct 13 09:15:20 -imac kernel[0]: The USB device Bluetooth USB Host Controller (Port 1 of Hub at 0xfa110000) may have caused a wake by issuing a remote wakeup (3)
Oct 13 17:27:01-imac kernel[0]: The USB device Bluetooth USB Host Controller (Port 1 of Hub at 0xfa110000) may have caused a wake by issuing a remote wakeup (3)
Oct 13 17:29:17 -imac kernel[0]: E:[AppleUSBBluetoothHCIController][BulkInReadHandler] Received kIOReturnNotResponding error - retrying: 1.
Oct 13 18:53:44 -imac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Oct 13 19:15:29 -imac kernel[0]: E:[AppleUSBBluetoothHCIController][BulkInReadHandler] Received kIOReturnNotResponding error - retrying: 1.
Oct 13 20:53:33 -imac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Oct 13 20:53:57 -imac kernel[0]: The USB device Bluetooth USB Host Controller (Port 1 of Hub at 0xfa110000) may have caused a wake by issuing a remote wakeup (3)
Oct 13 20:57:07 -imac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Oct 13 22:24:20 -imac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Oct 13 22:24:44-imac kernel[0]: The USB device Bluetooth USB Host Controller (Port 1 of Hub at 0xfa110000) may have caused a wake by issuing a remote wakeup (3)
Oct 13 23:32:11 -imac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Oct 13 23:32:43-imac kernel[0]: The USB device Bluetooth USB Host Controller (Port 1 of Hub at 0xfa110000) may have caused a wake by issuing a remote wakeup (3)
Oct 13 23:33:54 -imac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Oct 13 23:35:07 -imac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Oct 14 01:15:16 -imac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Oct 14 01:15:39 -imac kernel[0]: The USB device Bluetooth USB Host Controller (Port 1 of Hub at 0xfa110000) may have caused a wake by issuing a remote wakeup (3)
Oct 14 01:17:37 -imac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Oct 14 01:17:37 -imac kernel[0]: E:[AppleUSBBluetoothHCIController]WARNING !!!! [DeviceRequestCompleteHandler] error e000404f -- kIOUSBPipeStalled
Oct 14 03:04:39 -imac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Oct 14 03:05:09 -imac kernel[0]: The USB device Bluetooth USB Host Controller (Port 1 of Hub at 0xfa110000) may have caused a wake by issuing a remote wakeup (3)
Oct 14 05:34:25 -imac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Oct 14 05:34:48-imac kernel[0]: The USB device Bluetooth USB Host Controller (Port 1 of Hub at 0xfa110000) may have caused a wake by issuing a remote wakeup (3)
Oct 14 07:24:40 -imac kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Oct 14 07:25:03 -imac kernel[0]: The USB device Bluetooth USB Host Controller (Port 1 of Hub at 0xfa110000) may have caused a wake by issuing a remote wakeup (3)Hi elcroz, were you able to fix the issue eventually? Was it a hardware problem? I'm seeing the same behaviour since yesterday (also on a mid 2011 iMac).
When I woke the iMac from sleep yesterday Bluetooth was "gone" - no connection to mouse and keyboard and the module had disappeared from System Preferences. I rebooted and the Mac booted itself into safe mode. I did a PRAM reset and that instantly solved the issue. But today I saw the exact same thing again, only that the Mac wouldn't even respond to my old USB mouse when I connected it. After a hard shutdown and restart everything seems fine… Bluetooth available and functioning. What the **** is going on here?
I just performed the Apple Hardware test and no problems were found.
I'm seeing some of the same errors in console you pasted, but only one line of each after a restart.
Strangely my keyboard was mentioned in the console logs and my mouse wasn't - so I will keep using a USB keyboard for now to see how it goes.
Anyway, I would really appreciate any advice - let me know how it turned out for you, if you get the chance. I don't want to bring the Mac to an ASP if it's not really necessary, the nearest one is more than an hour away from where I am….
Cheers -
Bluetooth Not Available MBP 10.6.8
Recently recieved the dreaded Bluetooth: Not Available issue and have no luck troubleshooting after reading muliple forums and tryin all the things listed below. Any and all help is appreciated.
Reset SMC
Reset PRAM
Reset VRAM
Deleted com.bluetooth.plist (Lib/Pref/Delete bluetooth plist)
Switched between profilesHaving same problem here. In addition USB hub does not work, but individual USB do work when plugged in directly to MacBook
-
Bluetooth not available running 10.6.8
Mac mini/10.6.8/1.66 GHz/2GB/667 MHz/DDR2 SDRAM/CoreDuo-Intel
I have tried EVERYTHING except removing the case to check the bluetooth wire/chip. PLEASE tell me there is a fix out there for BLUETOOTH NOT AVAILABLE, please! I am tired of re-reading through the 2008 posts trying to find something I missed.
APPLE?!?! (oh Steve, we need you)Having same problem here. In addition USB hub does not work, but individual USB do work when plugged in directly to MacBook
-
Hi, I loaded an iTunes card and bought an audiobook a few weeks back! I was unable to download it because my wifi was down, my wifi has just been fixed but now my audiobook purchase is not available but the cash has been taken? Any ideas how to solve this
When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.
-
Bluetooth not available MacBook Pro (13-inch, Late 2011) Yosemite
Hi guys, I've been having a problem lately and I can't find a fix for it. My problem is my bluetooth button on the top menu bar had a black squiggly line through it then when I click on it, it says "Bluetooth: Not Available". When I go to system preferences the tab for bluetooth isn't even there its just gone all there is is network. I am trying to connect my magic mouse which has worked fine until now, I had this problem in Mavericks and upgraded to Yosemite to see if that would fix it, Also please note I have tried Resetting PRAM, Deleting the bluetooth files, and Force-quitting "blued" which didn't do anything.
Well then, unfortunately for you, the conclusion becomes clear: your BlueTooth isn't working correctly anymore.
You can try reinstalling OS X from the Recovery Partition - boot your computer with the [cmd] + [r] keys pressed until you see a Utilities window - but since upgrading from Mavericks to Yosemite pretty much amounts to a reinstall anyway I am not giving it much of a chance at success. Still, won't hurt though. Contact AppleCare for warranty options. -
Bluetooth not available after memory upgrade
Hi,
I have a Macbook pro. I upgraded the memory from 2 GB to GB, Everything is working but the Bluetooth that says "Bluetooth not available".
If i remove the memory the bluetooth works again. I tried also to put a bluetooth dongle and is the same.
This is what the console says
1/4/08 8:15:10 PM com.apple.launchd[1] (com.apple.BluedServer[520]) Exited abnormally: Trace/BPT trap
1/4/08 8:15:10 PM com.apple.launchd[1] (com.apple.BluedServer) Throttling respawn: Will start in 8 seconds
1/4/08 8:15:18 PM com.apple.UserEventAgent-Aqua[485] <CFArray 0x12d740 [0xa061c1a0]>{type = mutable-small, count = 2, values = (
1/4/08 8:15:18 PM com.apple.UserEventAgent-Aqua[485] 0 : <CFString 0x129780 [0xa061c1a0]>{contents = "/System/Library/CoreServices/Menu Extras/AirPort.menu"}
1/4/08 8:15:18 PM com.apple.UserEventAgent-Aqua[485] 1 : <CFString 0x1297c0 [0xa061c1a0]>{contents = "/System/Library/CoreServices/Menu Extras/Battery.menu"}
1/4/08 8:36:26 PM com.apple.launchd[1] (com.apple.BluedServer[1035]) Exited abnormally: Trace/BPT trap
1/4/08 8:36:26 PM com.apple.launchd[1] (com.apple.BluedServer) Throttling respawn: Will start in 9 seconds
1/4/08 8:36:35 PM com.apple.UserEventAgent-Aqua[489] <CFArray 0x1297c0 [0xa061c1a0]>{type = mutable-small, count = 2, values = (
1/4/08 8:36:35 PM com.apple.UserEventAgent-Aqua[489] 0 : <CFString 0x129740 [0xa061c1a0]>{contents = "/System/Library/CoreServices/Menu Extras/AirPort.menu"}
1/4/08 8:36:35 PM com.apple.UserEventAgent-Aqua[489] 1 : <CFString 0x129780 [0xa061c1a0]>{contents = "/System/Library/CoreServices/Menu Extras/Battery.menu"}
1/4/08 8:36:35 PM com.apple.UserEventAgent-Aqua[489] )}
1/4/08 8:36:37 PM com.apple.launchd[1] (com.apple.BluedServer[1042]) Exited abnormally: Trace/BPT trap
1/4/08 8:36:37 PM com.apple.launchd[1] (com.apple.BluedServer) Throttling respawn: Will start in 9 secondsHi blumail-
Sounds like bad RAM.
Return it and get something that works.
Luck-
-DaddyPaycheck
Maybe you are looking for
-
How to use customer_update_sales_area
Hi Friendz Could anybody tell me How I would use this function module to upload partner function. I can find documentation for this. Warm regards Manisha
-
i am in a real fix, i want to know the proper way of transpoprting table entries from dev server to q/a, prod i came across 2 ways first way se11 => ztable. menu => transport entries assign it to a req no. check in se09 /10 release. (i am giving the
-
Firefox won't update past 3.6.9
Was looking to update my pc to Firefox 4.0, since it hasn't automatically updated. When I went to check for updates it said download paused on 3.6.10 and when trying to get it to update, it simply says connecting to the update server for a time and t
-
What is this non-printing character? (¤)
The generic currency symbol (¤) shows up often as a non-printing character in a document I'm editing, mostly inside table cells where I'd expect paragraph symbols to be. I can't find any information anywhere, and now I'm curious. Does anybody know
-
When I write data in Chinese into my SQL database,and then read it,but it didn't display correctly,for you see,I use many method,but failed,Who can help me?