Bluetooth printing - "printer not available" message

Set up HP Photosmart 8250 with HP bluetooth device and set up iBook with D-Link Bluetooth DBT-120. The Mac Bluetooth Setup Assistant appeared to recognize the printer and told me I had it configured for use (and the printer works great when connected by USB cable to both Macs we have) but when I try to print or choose the Photosmart from the printer list and click on "configure", the iBook tells me the printer is not available. Has anyone solved a similar problem. Many thanks for any help...Charles

Hi Charles,
I'm having similar problems with my Canon i80. Bluetooth setup assistant tells me all if configured correctly yet printer is not listed in devices under bluetooth preferences - as yet I cannot print wirelessly.
Have you managed to solve things at your end yet? I'll keep you informed of any progress over here.
Thanks
Paulo

Similar Messages

Printer not responding message

My computer no longer works with my printer. I have a MacBook Pro running OS X 10.9.2 and a HP C 6280. Original problem started today when I tried to print, intial indication was normal but after a minute or so computer print info shows "printer not responding" message. Printer is plugged in, works as a copier and I printed a HP Network Configuration Page from the printer itself. I followed instructions on the forum and took the printer away System Preferences>Printers Scanners> Delete and when I tried to reinstall the printer it's not finding it. Looking online it seems the printer should appear as an option when I click the plus on Printer Scanners page I get an ADD screen but the printer isn't listed there either and I can't add it. IP address typed in Browser window doesn't find anything but I don't know how to fix that. I am using a Cable set up and the printer is hooked up via ethernet cable to the modem. This printer has worked fine till now I would certainly appreciate any help getting it back online. Thank You

Hi di757,
Welcome to the HP Forums!
I see that you can't get your printer back online with an Ethernet connection.
I would recommend to try and power off the Mac, turn off the printer, unplug the router for 30 seconds, plug the router back in, turn the printer back on, then turn the Mac back on. After that unplug the Ethernet cable from both ends and plug it back in.
Then I would try to follow this guide. OS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
Hope this helps, and have a great day.
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

I am getting a Mobile Network Not Available message when trying to make phone calls

I am getting a Mobile Network Not Available message after phone was drained for a few days. Texting works, internet works, I just cannot make calls.

Statosphere II
I've reset most everything, taken out battery/replaced, also set up roaming (all)
Can't check voicemail either
Thank you!

EDI: Partner profile inbound not available Message no. E0337

Hi Friends,
I am facing very wiered issue for incoming vendor frieght invoice. When the IDOC is sent to SAP from the edi subsystem, it gets posted with status 56 and error message
EDI: Partner profile inbound not available
Message no. E0337
Diagnosis
An inbound partner profile could not be found with the following key:
/0040000010/LI/VN/INVOIC/MM///
This involves the key fields of table EDP21:
-SNDPRN partner number of sender
-SNDPRT partner type of sender
-SNDPFC partner function of sender
-MESTYP logical message type
-MESCOD logical message code
-MESFCT logical message function
-TEST test flag
I have created the partner profile in WE20 for Partner type LI, partner role VN and process code INVL, message type INVOIC, message code MM. I have also checked the entry in TABLE EDP21 and the entry exists.
When I open the IDOC in WE19, and click on standard inbound TAB it says partner profile not maintianed, however when i click on the control record it opens a dialog box, where we have all the entries for partner profile and when I just click on any field in the dialog box and click continue and when again click on standard inbound it say partner profile maintained.
None of the data is changed in the IDOC control record, I just click on any field and it finds the partner profile.
Please let me know your thoughts, what could be possible reason and a solution.
Thanks
Deepak

Hi Deepak,
I am facing the same problem with a different message type.
But same effect. I can copy the IDoc with WE19 and it will process nicely, completely unchanged.
Have you found the reason for this?
Thanks,
Florian

CIMC on C210 server throws Error 2001: Service not available message

I am trying to configure vmware on a brand new C210 server for the first time and the directions say to access the CIMC and load the vmware media. Sounds easy enough except every time I go to the CIMC webpage I recieve an " error 2001: Service not available" message on every page I go to and none of the server info fields are populated. If I try to make any changes and save my settings the same message pops up and no changes are saved. Almost like the CIMC doesn't recognize the server or hardware. I ran the host update utility just now and upgraded the firmware for everything to the latest version but still no progress. Anyone have this happen or know how I can fix this?
Thanks in advance!
Jess

I got it working on one of the servers, and havent tried the same solutions on any other server.
What i did was manually adding an IP adress to the management IP, then save the config before rebooting. After rebooting i put it back to get IP from DHCP, and saved the config. After a secound reboot i was able to use the mangement interface without the 2001 error.
I'm not sure if it will work on the rest of the servers, but it's worth a try
Regards
Alex

In App Purchase showing "Service Not available" Message box with error code 805a01f4

Hi all ,
I am developing a windows phone silverlight 8.1 application .When i trying to buy my public app product using credit card i am getting message Service not available ."The store isn't available at the moment.Please check back
in a bit . This error code may be helpful : 805a01f4 ."
Please tell me how to resolve .
Thank you

Thanks for your response .
I try it many times . reboot the device and try again . . but still showing the same message . . but when i buy using "IDEA" .downloaded it without showing any error message . After few seconds got a message on my number that "Dear customer,
thank you for downloading Awsome from MICROSOFT .You have been charged RS.55. Your balance is Rs.xxx " . Then, what is the problem with credit cards ? Why it showing the Service not available message ?

I have reset my email password &now when I sign on I receive "yahoo server is not available" message.

I have reset my email password &now when I sign on I receive "yahoo server is not available" message.

Welcome to the Apple Community Michael.
Firstly, you need to change your details with Apple, Start here, change your country if necessary and go to manage your account. You may have already done this.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
Providing you are simply updating your existing details and not changing to another account, when you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again.
In order to change your Apple ID or password for your iCloud account on your computer, you need to sign out of the account from your computer first, then sign back in using your updated details. (System Preferences > iCloud, click the sign out button)
In order to change your Apple ID or password for your iTunes account on your iOS device, you need to sign out from your iOS device first, then sign back in using your updated details. (Settings > iTunes & App store, scroll down and tap your ID)
If you are using iMessages or FaceTime, you will also need to log out and into your ID there too.

Why do people using other brands of smart phones get a "not available" message when they try to view vids that I made on my iPhone 4s?

I made a video on my iPhone 4S and e-mailed to another party to view. The other party told me he could not view it. He said he got a "not available" message when trying to view it. Next I sent the video to him in a text message. He had the same problem again.

I have the same exact problem. let me know if you figured anything out

Bluetooth is suddenly not available anymore!

bluetooth is suddenly not available anymore! and i can`t find it in the systemeinstellungen

For a starting place trythese:
SMC reset:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
PRAM reset:
Shut down your Mac.
Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on your Mac.
Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears. Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
Release the keys.

"NOT AVAILABLE" Message keeps popping up on tv

Hello!
I have had my television for about two years not, and the past year, the "NOT AVAILABLE" message has been popping up. At first not so much, but now more often than not. The message become quite annoying as it stays displayed on the screen while watching tv. It also disables the remote control. How can this be fixed?
Thanks
Liss

I found how to fix it myself.
In my case, something was wrong with the signal comes from the button control on the left side of the TV.
========================
What I did
========================
unplug the power cord.
Remove back cover.
Look into the motherboard ( biggest green at the center).
First, I disconnect a connector on the motherboard come from the IR board that receive the wireless signal control ( meaning the remote is disable).
I turn on the TV, press on Menu button on the TV side. Menu is still scrolling.
I turn off TV, disconnect power cord and connect the IR connector back to the motherboard.
I then disconnect the nearby connector that comes from the side control buttons.
Turn on the TV by remote, press menu button on the remote to check. The menu stays.
DONE.
I use electric tape to seal off the connector and let it hanging there.
Close the TV back panel
I have been watching TV for 3 nights without menus/channels scrolling.
NOT AVAILABLE red message when watching DVD is no longer existed.
Hope this help someone else.

Adobe Acrobat 7.0 Pro PC with Windows 7 - error mess "Adobe PDF Printer - not available" Help?

Just loaded my old Acrobat 7.0 Professional on new PC with Windows 7 - Error message "Adobe PDF Priner not available. Therefore do not have option of Adobe printer when using Word.
Any ideas as to what - if anythjing I can do?

Hi,
Technically acrobat 7 not not designed for windows 7 OS. You can try to install the pdf printer manually but it's not guaranteed :
Click the Windows "Start" menu, select "Control Panel," choose "Hardware and Sound," click the "Add a Printer" link under Devices and Printers.
Click "Next" and select "Local Printer Attached to This Computer."
Remove the check from "Automatically Detect and Install My Plug and Play Printer" and click "Next."
Select "My Documents\\*.pdf (Adobe PDF)" in the port selection drop-down menu and click "Next."
Select the "Have Disk" option and click the "Browse" button to open a dialog box.
Select the "AdobePDF.inf" file located in the AdobePDF folder in your Program Files directory under "Adobe" | "Acrobat 9.0" | "Acrobat" | "Xtras."
Select the first item on the list of Adobe PDF Converter options and click "Next."
Type "Adobe PDF" in the field for a printer name and click "Next."
Wait for two minutes for the system to process the drivers and click "Finish" to close the Add a Printer wizard.
Hope this helps.

HT1338 "bluetooth not available" message

my computer says "bluetooth not available". My keyboard, mouse and printer are all using bluetooth, and were, yesterday. What does this mean?

Open System Preferences > Bluetooth
Make sure On and Discoverable are selected.
And try deleting the .plist
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type this exactly as you see it here:
/Library/Preferences
Click Go
Move the com.apple.Bluetooth.plist file from the Preferences folder to the Trash.
Restart your Mac.

HP Laserjet Printer not available in Time Capsule settings

I have an HP Laserjet P1005 printer; very basic stuff. I had previously set it up so that it was connected to my Time Capsule. There were a few issues (I had to connect my MacBook Pro to the Time Capsule via LAN cable for the printing jobs to actually print) but I could use the printer.
I have recently moved offices which required disconnecting everything including my TC. Again, nothing unusual here and when I connected everything in I got back to work no problem. However, I can no longer use the printer (not even when I connect my laptop directly to the TC. I've gone into the TC settings to see that there is no printer linked to the TC. I've tried many times to set up a new printer in my preferences, but when I try to manually change the settings through Airport Utilities there is no printer available for me to choose.
Am I setting up the printer incorrectly? Maybe someone can help me set up the printer so that it comes up when I open Airport Utilities? And why do I always need to connect my laptop to the TC when I want to print; is it because the printer is pretty basic and can't link this way?
Any help will be greatly appreciated!
Andrew

I'm not sure if the following will help but here goes. I have two printers on my time capsule---A Brother multifunction that I have had on for about 2 1/2 years and recently added a HP Deskjet(both on USB). I first installed the printer directly to my iMac to make sure that I have no printer driver issues etc. Then I plugged the two printers into a USB switch(forgot to turn the HP printer on).. Then I figured my problem out. Printers only show up in the Airport utility if they are turned ON.
May be this will help.

Printer not connected message

I recently upgraded to Mountain Lion, and since then I am unable to print--I get the message "Printer Not Connected". My printer is connected to my Airport Extreme router via Ethernet cable. When I go to system preferences, then network, the firewire and the ethernet choices are red--as in not connected or not working. When I go to advanced, after choosing ethernet, I clicked on Renew DHCP Lease, but this doesn't change anything. Any help would be appreciated, because I use my printer all the time. It is a Canon Pixma MG8120.
Also, my Airport utility is saying "No configured Airport base stations have been found. Airport Utility will continue searching."

This is a common complaint after upgrading from Snow Leopard systems.
Try this - reset your printing system as described here:
http://support.apple.com/kb/HT1341
Choose System Preferences from the Apple menu.
Choose Print & Scan from the View menu.
Hold down the Option key while clicking the "-" (Remove printer) button. If no printers are currently added, hold down the Control key while clicking in the box that appears above the "+" (Add printer) button, then choose Reset printing system… from the contextual menu.
Then, add the Canon Pixma again using the "+" button.
What does Reset Printing System do?
Deletes all queues and jobs.
Resets all printer settings to their default by deleting configuration files.
Performs a permissions check on the /tmp directory.
Any printers, scanners, or fax modems that previously appeared in System Preferences will need to be added again after resetting the printing system.
That should fix it.

"Printer not connected" message, but printer may end up printing anyways hours after

I'm pretty much helpless after trying reinstalling drivers (the printer is a HP C7180), updating and reconfiguring my router in various ways (Dlink DIR-655, 2.07NA) and trying all types of connections possible for the printer (ethernet, usb, wifi, auto dhcp, fixed adress dhcp), deinstalling and reinstalling the printer in Lion.
The drivers were properly re-downloaded and reinstalled. I followed Apple instructions for this printer under Lion.
The printer will work just after reinstalling from a first computer, but will immediately start behaving strangely after that. Any other computer will be told that the printer is not connected. The job will be put on hold, but it might end up printing an hour or two after that (or never).
I can't tell for sure if the printer is defective. The diagnostic isn't clear at all. I'd buy a new printer, but I'm afraid it might do the same thing, because it could be some problem with the router, for instance. I haven't found anything specific about this type of problem with this router model and this OS version (Lion 10.7.3).
Any idea ?
Z

Hi @lbf626,
Welcome to the HP Forums!
I noticed that you cannot connect your HP Officejet 6500 a plus 710n-z to your MacBook running OS X 10.10.2. I am sorry for the frustration, but I am happy to help!
Please see the following:
'Printer is offline' Message Displays on the Computer and the Printer Does Not Print: Mac OS X. (I would follow the instructions for OS X v10.8 Mountain Lion and OS X v10.9 Mavericks. As it will work on Mac OS X 10.10.2)
Printer Does Not Maintain Wireless Connection.
Tips for troubleshooting wireless connection issues
The following tips can help you troubleshoot and avoid wireless connectivity issues. You can try these tips separately or in combination to get a successful wireless signal.
Move the printer and the computer closer to the router, but no closer than 6 ft (1.8 m). Wireless signals can be weaker at greater distances between the printer and the router.
If you are experiencing an intermittent wireless connection, try restarting your router. Consult your router manufacturer, Internet service provider, or network administrator for instructions on how to restart the router.
Remove any metal objects between the printer, the computer, and the router. Objects such as refrigerators, microwaves, or metal bookcases can interfere with wireless transmission.
Move any device that emits radio signals, such as microwaves and cordless telephones, farther away from the printer. Such devices can interfere with wireless signals.
Make sure the router is broadcasting at 2.4 ghz and not at 5 ghz.
I would also recommend this website, HP Wireless Printing Center - Troubleshooting Issues.
Hope this information is helpful, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Bluetooth printing - "printer not available" message

Similar Messages

Maybe you are looking for