Bluetooth Suddenly Not Working With My Huawei Phone

I have a 13 inch Macbook Pro (the latest one). I also have a Huawei y300 phone. The two used to work together fine. I could send photos back and forth using bluetooth with no problems. But now I can't send anything. I can pair my phone with my MacBook but when I go to send a file, I get a "cancelled by user" message on my phone. Nothing will connect to Bluetooth on my Macbook. I think it's the Yosemite update. That's when the bluetooth seemed to have stopped working. Has anyone had this issue? is there any fix?

First check and see if Wacom has a driver update.
If their most recent driver does not solve the problem, then you need to call Wacom and work with them to see why the driver is not working on your system.

Similar Messages

Why does my imessage not work with only 1 phone number

Why does my imessage not work with only 1 phone number? It keeps going to imessage and then back to text message

Both you and the recipient have to have active data connections, and both devices have to have iOS 5 or higher to be able to use iMessage. Also, they both have to have iMessage activated. If that is already the case, there is a possiblility that iMessage is down. It has gone up and down several times in the past week. Check this page for status, and if necessary you can report a problem with a link in the lower right corner. http://www.apple.com/support/icloud/systemstatus/

Bluetooth n95 not working with headset

i have recently bought the motorola s9 bluetooth stereo headset. there are a couple of problems. it works fine to connect for the first time using the code on the phone. then if i turn the headset off and on it connects and immediatly disconnects. this is a problem but not a major one.
the biggest problem is the music cuts out all the time for a couple of seconds. i have tried placing the phone right next to the headset and it stil happens. i have read the other n95 forums and see this is very common with the new firmware (i had already installed new firmware so i dont know if this happened on the old firmware).
does anyone else have this problem with another headset or can anyone give me a solution. how often does firmware come out. and is it possible to delete the new firmware.

Same problem here, unfortunately - iPhone 3G & 3.0 do not work with both the SHB6100 and SHB7100 by Philips.
Philips SHB6100 + iPhone 3G 3.0: A2DP *does not work*
Philips SHB6100 + Nokia and SE phones: A2DP works
Philips SHB6100 + MacBook Leopard: A2DP works
Sony DR-BT30Q + iPhone 3G 3.0: A2DP works
Complaining here, however, is not really going to help as these are user to user forums and there is nothing users can do to fix this. Please report this issue at the Apple iPhone Feedback page @ http://www.apple.com/feedback/iphone.html

Gmail suddenly not working with Apple Mail

My gmail suddenly is not working with Apple Mail.
It said my username or password is wrong, but it was okay this morning.
Nevertheless, I deleted my gmail account, and re-setup it using Internet Accounts from System Preference.
However, I got the beow message:
There was a problem setting up the Mail account. An unknown error occurred.
I am sure my username and password are correct because I just login it using Safari.
Does anyone know what the cause is?
Please help~~~

Gmail not syncing in mac mail is a problem that is also in snow leopard since the new year.
OSX 10.6.8 is the highest OS that will run on an Intel Core 2 Duo. Do not try to install Mavericks on this machine! I will install, but turns it into a dinosaur and many programs will no longer run.
I had an issue with Mac Mail not syncing with imap.gmail.com. and Safari not being able to find apple.com.
This was resolved by working with an upper level tech support member for several hours deleating particular system library files, uninstalling most addons, reseting system network settings and a whole lot more! (too much to name here)
Thank you Apple Tech Support.

Bluetooth is not working with Windows 8.1 on U410 touch

Hello,
I have a Lenovo U410 touch, and i just upgraded to windows 8.1 though the store.
And the bluetooth is not working at all, it says that the PC is searching for Bluetooth devices. While everything was working great before.
I have updated all the drivers from the Lenovo websites and still nothing is working
I went to device manager and checked under bluetooth: Intel (R) Centrino Wireless Bluettoth 4.0 + High Speed. Microsoft Bluettoth Enumator, Microsoft Bluetooth LE enumarator all 3 are up to date.
Then I went to network connections (from the start) and i have a red cross under Bluettoth network connection 2 and says not connected.
My windows is also up to date
I really think gooing back to Windows 8 since i cannot listen to my music on my beatbox and connect to my phone and tablet,
Thank you for your help

neokenchi wrote:
hi erabbath,
Welcome to the Forums.
If you have the Intel Centrino N2230 Wireless + Bluetooth adapter, can you try to:
1. Navigate to the Control Panel (large icon view) > Devices and Printers and try to pair a bluetooth device (i.e. Bluetooth Headset) and observe if it gets detected under the device list.
2. If the Bluetooth Headset is listed but it's not working try toright click on it > choose Properties. On the bluetooth properties Window, go to the Services Tab and check all the appropriate bluetooth services.
Sample picture
Let me know your findings.
Regards
Thank you very much for your answer,
I went to Control Panel > Devices and Printers and i tried to add a new device as the bluetooth doesn't appear this is what i got. By the way the bluetooth was on.
Link to picture
And this is what i have on the Bluettoth
And it search endlessly whereas before the upgrade it was working properly,
All the drivers are up to date as well as windows updates are all installed
Thanks in advance for your help
Regards
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

Nano 4g will suddenly not work with alarm clock. What happened?

As of the last time I synced it, my iPod nano 4g will not work with an alarm clock. What happened? It doesn't work with mine or with my roommate's, and her iPod will work with my clock. My iPod will PLAY in the clock dock if I turn it on and hit play, but won't wake up and play anymore as an alarm. I tried setting the alarm on the iPod instead of on the alarm clock, and that doesn't work as a fix (it won't make the clock wake up). ARGH.

Robert116 wrote:
Yeah, mine won't work. Just started acting up this week.
It doesn't work at all. I can set the alarm for any time, and it simply doesn't go off. I got a replacement phone of the same LG Accolade model, and it doesn't work either.
I switched the clock display settings, thinking there might be a glitch there. Didn't work when I changed it, or when I put it back to my original settings.
Agh!
Hi Robert116,
Please ensure that you have software version VX560V04 installed on your phone. For instructions to view software version please visit this LINK.
If you do have the correct software version a LG Accolade VX5600 - Master Reset may resolve the alarm clock issues outlined on your post. A master reset will resolve issues if any of your phone's system files became corrupted.
Please keep in mind that a master reset will erase all data and restore preferences to factory default specifications. Performing a hard reset is only recommended when the existing data has been backed up or is unwanted. Please backup your information before you do a master reset.
VX560V04

IPhone 5 Bluetooth Audio not working with stock Toyota radio

I have a 2010 Toyota 4Runner Limited which has the premimum JBL radio in it. Up until recently, I have had an iPhone 4 which worked well with both hands free phone features, along with Bluetooth Audio so I can stream my music from iTunes or Amazon Cloud Players. I dont use the feature all the time, so I am not sure when it stopped working (after upgrading to IOS6 or upgrading to an iPhone 5) but bluetooth audio no longer works. I can still use the bluetooth phone features, but if I go to the bluetooth music tab on my stereo, it states that the portable player is not connected. Siri also works fine through bluetooth, as it it can read my text messages, ask and answer questions through the car stereo, though I cannot make an outgoing call with Siri because after it shuts off siri and starts to dial, my stereo disconnects.
I know Apple updated the bluetooth, but you would think the new version would be backwards compatible, right? Is there a plan from Apple to fix this, because I am sure Toyota isnt going to update the firmware on their stereos just to fix an issue with one phone...

Actually, as an update, mine is now working (the BlueTooth Audio part, Siri still cannot place calls).
I have done this on my first (now smashed) iPhone 5 and my new iPhone 5. It takes a lot of trial and error, but you can get it to work.
First thing is with the iPhone 4, all I had to do was connect the phone in the phone connect screen and it just worked for both. Not so with the 5. With the 5, I have to register it both in the Audo Settings> Bluetooth Audio Settings menus as well as the phone settings on the radio. I didnt know there were two different connections with two different pins. (0000 and 1212). I forget which one you have to connect first, but again, I tried it so many times both installs and it eventually worked. It may be easier to change the name of either the Phone or Bluetooh Audio name from Car Multimedia, so the iPhone can easily connect to one or the other, but I left them both with the same name. I can now play music, and when the phone rings, automatically swaps over to that one.
Play with it and you will get it to work. If I have time, i will remove it and do it again and write down the steps.

Iphone 5 bluetooth is not working with my macbook

can somebody help me? my iphone 5 is not working when i try to use it with my mackbook.

What are you trying to do? The only thing you can pair your bluetooth for is to tether from your phone to your macbook. You cannot do anything else with bluetooth.

Bluetooth connection not working on US Nokia phones from J2ME Midlet (MIDP

Hi All,
We are developing a J2ME midlet (MIDP 2.0 ,CLDC 1.1)which makes bluetooth connection to other devices.The bluetooth
connection is working perfectly on indian nokia phones with Airtel as carrier.But when we deploy the same midlet on Nokia E71
US phone with carrier as AT&T ,the bluetooth connection is not working.The sample code is as follows:
public void run(){
try{
StreamConnection connection = (StreamConnection)Connector.open(btConnectionURL);
// open an input stream to get some data
InputStream in = connection.openInputStream();
byte[] serialData;
readData = true;
while(readData == true){
int lengthavai=0;
lengthavai = in.available();
if(lengthavai > 0){
serialData = new byte[lengthavai];
int length = in.read(serialData);
System.out.println("data read: " + new String(serialData));
dataViewForm.append(new String(serialData));
in.close();
connection.close();
}catch(IOException ioe){
ioe.printStackTrace();
when we try to connect on US Phones],the execution hangs at the following line of code:
StreamConnection connection = (StreamConnection)Connector.open(btConnectionURL);
No exception is caught.
Our midlet is not signed.
In the Forums it is said that the problem is with the unsigned midlet.AS some of the US carriers block the secure API usage
on Unsigned midlet.
But our question is, if we buy a code signing certificate from Verisign or Thawte and sign the midlet, will this problem be solved.
Any other alternative solutions for this ???
Immediate help will be appreciated.
Thanks,
Yash

You might want to read this before buying a certificate:
http://javablog.co.uk/2007/08/09/how-midlet-signing-is-killing-j2me/
It's not my blog, but I pretty much agree with what it says. Unfortunately the network operators can control the access 3rd party trusted certificates have, so even if you sign with Verisign for example, the signed midlet may not have any more privileges than an unsigned midlet, depending on network. They do this so that only midlets signed with one of their own certificates have unrestricted privileges forcing anyone who wants a useful application to buy it from the network instead of downloading an equivalent freeware version from Getjar for example. Some networks are worse than others, so signing your midlet will allow it to work on more phones than an unsigned midlet. I think Verisign have some info on AT&T on their website.
The whole MIDP specification for security is a joke, IMHO. I don't mind unsigned midlets flashing up a warning once during an application. Writing 20 files, for example, will give 40 security warnings for reading writing data which is ridiculous, as the user obviously either trusts the app or he doesn't. No one runs an app that they only sometimes trust.
As far as I know the only mobile manufacturer so far to see sense is Sony Ericsson. All of their new phones from Java platform 7 onwards allow unsigned applications access to the file system, bluetooth etc with just one warning when the applications starts.
Andy

My Pen Pressure Sensetivity is Suddenly Not Working With My Wacom Bamboo Creat Tablet

I"m having trouble with my tablet that I have had and used many times before. It's supposed to have 1,024 levels of sensitivity, but now, when I'm in my brushes panel, and I try to control the brush size by pen sensitivity, it comes up with the little orange error sign that says I don't have a pressure sensitive tablet. I have used it with this computer and with another that both have photoshop, but it's not working all of the sudden. I have tried googling it and updating to the latest driver for my tablet and downloading the latest photoshop update, but nothing is working. I have Windows 7 and the whole Creative Cloud on the Student One Year plan.

First check and see if Wacom has a driver update.
If their most recent driver does not solve the problem, then you need to call Wacom and work with them to see why the driver is not working on your system.

Bluetooth headset not working with 2008 Macbook!

Hello,
I just got a new Macbook and love it!
But, the other day I tried out my Bluetooth headset and the A2DP headphone choice works great.
But when I change it to headset for use with skype I can hear the person but all they hear is weird repeating static. I listened to myself with skype call testing service and it sounds bad. I looked in preferences of sound and most of the sound bars are purple and moving as if
i am yelling into the microphone. I know it is not the headset for it works with my cellphone and eMac.
Anything I do to the headset doesn't solve this or even brake the pattern in the purple bars.
I turned off the headset when it was showing these bars and they kept going.
It is not the headset. The Macbook is capable of receiving files through Bluetooth so it is not the input of Bluetooth that is the problem.
Also, when I first started the microphone of the headset it was clear then after a couple seconds it started to drown out my voice then it was gone, replaced by shhhhhhchhh.
My headset is a Plantronics 590E.
Thanks,
MIBM

Yes, thank you.
I was recently on Vacation and scheduled a Genius Bar visit and they tested my headset with another Macbook and same thing. I am very mad at Apple after finding this out. I had a feeling it was drivers or something but obviously could not test seeing as I only have one computer running Leopard, eMac runs Tiger. I actually have a third party bluetooth dongle working with my eMac. It is an Iogear dongle and on the box it says all features work with Mac and then I plugged it in and was unable to turn on/off and couldn't use headsets, then after hours of research I found a forum and downloaded a Broadcom driver and voila! it worked. That is also why I wasn't sure if it was a driver problem or hardware.
If anyone needs a tutorial and the driver for a broadcom bluetooth USB dongle I would be happy to help.
Thanks,
MIBM

AA3 suddenly not working with RME Fireface 400

I bought an RME Fireface about a month ago and have been using it with AA3 to edit some 6 to 12 track sessions. Everything was working fine until today when AA3 only displays the splash screen when I start the application -- "Initializing Required Components".
However, if I have the FF turned off, then A3 starts normally. If I then turn the FF on while using AA3, AA3 immediately stops responding. From the other threads I've read, this is an ASIO issue, but I'm not sure why it suddenly started or how to resolve it. I did try renaming the audition/3.0 preference directory -- that didn't fix the issue.
My FF is working with other apps, so I don't think the problem is with it. I assume something has changed in my system configuration for this to be happening, but I can't identify what. My instinct is that when I configured Finale to route its sound through the Fireface, that caused some kind of systemic change... but I just can't track it down.
I've got a project to finish this weekend and am getting worried... Thanks!
OS: Windows 7 Pro
Card:RME Fireface 400, driver 3.0.34.0 (12/17/10)

Update:
This was resolved by re-installing Audition 3.0 (with patch to 3.0.1)
As a side note, since I have an upgrade version of AA3, I was unable to perform the reinstall without digging up my serial number for AA1.5 from long ago. It's a good thing I'm a packrat, when I called the authentication line they told me -- even after all this time -- I was SOL without that serial number.
Now that I've dug it up, I made sure that it was registered with Adobe as well.
Cheers --
Mark

Bluetooth headset not working with flash files

Just got a Plantronics Voyager 510 bluetooth headset. Works just fine, except when viewing clips at YouTube. Not only is there no sound, the clip freezes after a few seconds. I believe they are Adobe Flash. Now this is on my new late 2007 MacBook with Leopard.
So I figure I'll try the headset on my Intel 1.66 Mac Mine with Tiger 10.4.10. Same thing
Any ideas.

Apparently Apple cheaped out on the Bluetooth support in the Tiger OS X (or an official profile wasn't even available)....something to do with not having Stereo Headset support.
It is possible to circumvent it: http://blog.david.connolly.name/2007/06/stereo-bluetooth-profile-a2dp-on-mac-os. html However, as indicated on the top of that topic - it is outdated (and IMO too much effort).
In a nutshell - you're being quietly coaxed in to buying Leopard OS X - which does have the Stereo Bluetooth profile installed.
What I don't get is why Apple can't release to us a nice little patch for Tiger to give us the full use of our Bluetooth hardwares.

Apple Bluetooth Keyboard not working with Macbook??

I copied this from a post on a reply earlier, but thought I'd start a new post and hope that someone has had a similar problem.
I have the new Apple wireless keyboard that doesn't work on my Macbook. Ironically, the only keys that do work are the top row. Screen brighten or dim, Dashboard, speaker volume control etc...
I've connected it and paired it successfully, but the keys just don't seem to work. (delete and arrow keys also work) After a while, my mighty mouse (wireless) start acting funny, or the track pad button on the laptop itself stops working. Shutting of the keyboard at this point doesn't help and I need to reboot the computer.
I've taken it to Fortune Tower in Bangkok where they have a apple support center and he couldn't get it to work on his 17" mac book pro either. He wanted me to leave it, but I took it back to the international departure terminal of the Bangkok international airport, (had to wait for another flight to China to do this) and returned it to the store where I bought it. But they wanted to see the problem and I showed them that it didn't work. Convinced, then then brought out a new one and I wanted to verify that IT worked but same exact problems.
I suggested that they connect it to another computer? Which they did, an Imac and it worked fine. Then they connected it to a Mac Book Pro, (15 inch) and it worked fine there as well.
Could this be a firmware update issue?
Anyone else having problems like this?
I just hope that this isn't a simple setting somewhere that I've overlooked... but I'll try anything at this point.
thanks,

I have exactly the same problem! Macbook Pro 2GHz (so not a very recent one...), OS, firmware, etc updated to the latest. My Mac dealer proposed to do a clean installation of 10.5.2 - did not help. Apple Support told me to uninstall the keyboard and install it again (for more help they want money...) I did - same problem. Only function keys and cursor keys work. Funny thing - during pairing the code can be entered and recognized, but later no character cames through.
The keyboard is perfectly OK, since it works with my MacPro without any problems.
The mouse, on other hand, works nicely so far.
Maybe now will someone give us a wise advice?

Modifier Keys suddenly not working with Numberpads

I favor the use of a numberpad and as such i have been using a third party USB Numberpad. I also have a Apple wired keyboard that comes with the number pad.
All these while, the modifier keys (shift, alt, ctrl) works with the numberpad and the numberpad section of the apple keyboard. Somehow, recently, not sure when, it no longer works.
I've tried to reset default on the modifier key section but it just doesn't work... This is really frustrating. the only thing i remember installing lately is "bettertouchtool" and buying a magic mouse.
Bettertouchtool is not usually running unless i choose to run it, so i'm not sure how that affecs it, not am i sure if totally removing it via a third party app helps.
Appreciate HELP! PLEASE!

i am having the same problem. It just started a few days ago. Im thinkin its a problem with the most recent update. Im goin to contact apple to let them know. I'll post again when i hear something. If anyone figures it out before then please let us know!

Bluetooth Suddenly Not Working With My Huawei Phone

Similar Messages

Maybe you are looking for