Problem plz help in this

hello
i connect the iphone to my Mac
open the itune
i got this
Itune was unable to load dataclass information from sync services . reconnect OR try again .
AND This Too
Apple Mobile device Helper quit unexpectedly
i search in your site i got this
http://support.apple.com/kb/HT1747
i did what i see
but nothing happen
i try to do it again
But
i did not found
AppleMobileDeviceSupport.pkg
in its loaction in
Library/Receipts/
i removed and install the Itune More that 10 times
but every time i search for
AppleMobileDeviceSupport.pkg
in its loaction
but i did not find it
did i Must reinstall the Mac Snow leopard again to slove this problem ??
i see the iphone in itune
i sync ONLY the Prog
No backup
No contact
No notes
No any thing
Only App

ok lets try that alone
can you send the missing file to me
# Choose Go > Go to Folder.
# Enter /System/Library/Extensions and click Go.
# Locate the file AppleMobileDevice.kext
# Choose Go > Go to Folder.
# Enter /Library/Receipts/ and click Go.
# Locate the file AppleMobileDeviceSupport.pkg
plz send them to my direct mail
[email protected]
that if you use itune 9.1 as i Hope
thx Sir

Similar Messages

Hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help

hi i got a mac mini but when i connect it to my smartax mt882 modem via ethernet it says device not connected can anyone solve this issue it work fine with the usb connection but the ethernet is giving me problems plz help

Hello, give this a try...
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.5, 10.6, 10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x/10.8.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK.

Big Problem, PLZ HELP

So, when i click on the itunes shortcut, which has the same icon as the Apple Software Updater, I get a box that says that iTunes has encountered a problem and needs to close. We are sorry for the inconvenience. I hit send once and sent the error report, and then restarted my computer to see if that would help. It didnt, so, now i cant access itunes this is a major problem cause i have all my songs on this computer. I also tried to plug in my ipod and see if that would make it load.
I installed iTunes 7.0 on my laptop, the exact same way, and i works on my laptop, but not on my computer.
PLZ HELP ME

ok this is what i did when that happened to me. i uninstalled quicktime then went here: http://www.apple.com/quicktime/win.html and reinstalled the latest version :0)

Audio Clip problem plz help..

There is some problem with my code. It is actually for simply playing a wav file.
It gives errors on two lines....
import java.awt.*;
import java.awt.event.*;
import java.io.*;
import javax.swing.*;
public class MediaPlayerDemo extends JFrame
     AudioClip clip; //Error Here
     public MediaPlayerDemo(String title)
          super(title);
     clip = getAudioClip(getCodeBase(),"access.wav"); //Error Here
     clip.loop();
     public static void main(String args[])
          MediaPlayerDemo m = new MediaPlayerDemo("Title");
          m.setSize(400,400);
          m.setVisible(true);
}

"Audio Clip problem plz help"
You have to learn to help yourself.
Have you done anything to try to fix the errors yourself?
AudioClip clip; //Error Here
the error generated here is self-explanatory.
if you can't fix this, you should get a good book on java basics and start again.
the other error is also easy to fix.

Classpath problem plz help me

hi!
i am unable to run my RMI server program .Name of My server class is SumServer.java,it implements SumInterface.java all the files(.class,.java and stub) are at location c:\javaprog\rmi\sum.
I have not put them in any package.
value of classpath is
classpath=c:\jdk1.4\lib;.;c:\javaprog\rmi\sum
i go in sum folder and run the program
c:\javaprog\rmi\sum > SumServer
it gives me following exception.plz help me out.
Thx in advance.
Exception occur.Unable to register serverjava.rmi.ServerException: RemoteExcepti
on occurred in server thread; nested exception is:
java.rmi.UnmarshalException: error unmarshalling arguments; nested excep
tion is:
java.lang.ClassNotFoundException: SumServer_Stub

Deepa lakshmi wrote:
Hi,
Am new to weblogic.
Am using the tools are,
Weblogic8.1 version
MySql5.0,mysql-connector-java-3.1.12-bin.jar file
While test configuration of connection pooling am getting the error is "JDBC Driver is not on the classpath".
How can i solve this problem
plz help me
regards
DeepaEdit the start-weblogic script. Near the bottom, you will see
lines that create a CLASSPATH for the weblogic server. Add a
script line that adds the mysql driver to the classpath there.
Joe

I'm unable connect my I pad mini to my laptop(window 7,64 bit) after formatting,my iTunes didn't find my device,before format everything working properly but this time lot of problem plz help

I'm unable connect my I pad mini to my laptop(window 7,64 bit) after formatting,my iTunes didn't find my device,before format everything working properly but this time lot of problem plz help

You formatted your computer's hard drive? If so, it's like starting with a new computer unless you restored all of your content from a backup but it does;t sound like that's the case.
See wjosten's excellent how-to here: Syncing to a "New" Computer or replacing a "crashed" Hard Drive

In BAPI creation iam getting some problem plz help me in this issue?

Hi All
    I am new to BAPI.
    I did one program by watching the below link
    http://www.saptechies.com/step-by-step-procedure-to-create-bapi/
    By watching that tutorial iam able to develop up to the creation of BAPI.
    While the releasing of my BAPI object its showing the following error
    Released object types must be transportable.
    While the releasing the method its showing the following message
    Object type components have higher release level than oject type.
    If any one knows how to resolve this issue please help in this topic
    Thanku.
Regards,
K.S.L.Neelima.

Hi Neelima,
As the error message shows: Released object types must be transportable
This means you have saved the object type also as local object under $tmp. You should not do this. Create the object type under any dev package and then try releasing it. This will work for sure.

Problem PLZ Help me

Hi Guys,
I have a problem to make a developer application Client/Server.
When i install forms Runtime on the Client`s computer and i open the application, i get the error that he can`t find the menu and the libraries.
The menu path is for example on my computer F:\s3\Salesmenu
But on the client it can be a different path an then he can`t find the menu.
Now the properties for the main form are:
Menu module f:\s3\Salesmenu
Initial menu Salemenu
Does anyone know how to fix this problem for example:
1) by let the program search for the menu.
2) .....
Plz Help
Vincent

set your FORMS60_PATH on the client to Formspath;libpath;menupath so it looks in every dir named in the path.

Nokia n79 problem Plz Help!

Hello!My nokia just stuck,or hang in(i dont now english good) but i cant do enything.Evry button just dont work only at start when i write my pi(and somethimes then too).Works only power button.Its weard.Plz help.Somethimes a whole day are no problems somhetimes a whol day.

hey ivee n everyone else .. i'm facing the same problem.. n i need to fix this problem myself..
my n79 gets hang constantly nowadays.. i've used this phone for 1 year plus now so warranty's no more..... none of the buttons on the keypad works when it gets hang.. onli the power button is functioning.. now it's gettin worse .. it even hangs before i insert my pincode... i cant sms, call , or anything.. it hangs after i pressed a few buttons..
so ivee u've fixed ur n79 youself right..? umm.. can u explain to me wat a smallboard is? is that the board at the lower part of the keypad where u can see buttons underneath the white layer? and is that board expensive?
pls reply asap anyone.. urgent

N79 hanging problem plz help....

while unlocking the keypad of my n79 sometimes the phone gets hanged then i have to take the battery out and then again switch on the phone........plz help me how to get rid of this problem???

I have also same problem with my Nokia N79, I just cancelled sensor for automatic themes from cover. Just open back cover & stick some paper or plastic cello tape on four hole marks of covers wich r sensor for automatic themes to change colour of back cover same as theme colour. From 2 days I feel my mobile working fine without hanging ! so try it, all the best.

Bluetooth connection problem plz help...

hi everyone, just bought a new pearl 9105. everything works fine and even bluetooth... through which i can transfer data from blackberry to other mobiles(samsung,sony ericsson)... but the problem is i could not recieve data from other mobiles.i should get contacts list from the other mobiles... but due to this problem i couldnt. plz help me out..

The best way to receive a file from another device via bluetooth is to go to Media, then press Menu, choose Receive Using Bluetooth, waiting for connection will be display, then send from the other device. It should work without hassle.

Package Problem : Plz help

I've make two classes named First.java and Second.java in e:\javafiles\test\vg folder
package vg;
public class First
          public int m = 100;
          public int n = 200;
package vg;
public class Second
          public static void me0()
               System.out.println("Stupid cant u see the value of m is zero");
          public static void mgrn()
               System.out.println("Yaar m is greater than n");
          public static void neven()
               System.out.println("The value of n is Even");
and a Third class
import vg.*;
public class Last
          public static void main(String robert[])
               Second d = new Second();
               First f = new First();
               if(f.m==0)
                    d.me0();
               if(f.m>f.n)
                    d.mgrn();
               if((f.n%2)==0)
                    d.neven();
               else
                    System.out.println("The value of n is Odd");
Now the problem is that if I put the Last.java at e:\javafiles\test and compile it , it works fine but if I put the Last.java anywhere else e.g at e:\javafiles and try to compile it it does not works and gives error
E:\JavaFiles>javac Last.java
Last.java:1: package vg does not exist
import vg.*;
even if I change classapth variable as E:\javafiles\test or even E:\javafiles\test\vg
plz help me in this regard

You need to change where it is trying to find the 'vg' package. So, if your Last.java is in e:\javafiles, then you need to
import test.vg.*
e.g.
import test.vg.*;           // Change this line
public class Last
          public static void main(String robert[])
               Second d = new Second();
               First f = new First();
               if(f.m==0)
                    d.me0();
               if(f.m>f.n)
                    d.mgrn();
               if((f.n%2)==0)
                    d.neven();
               else
                    System.out.println("The value of n is Odd");
Alan

Report problem plz help

hi to all
Using form6i and run in client server. i cant solve this problem please help to all master :
I have a text item in forms and button. When i type the Customer_Name in text item then all names appears in reports, i want that when i type the name, only that name will appear .
Please check what is wrong with my code and steps.
In report wizard, query statement i put "Select * from S_customer"
then i call the report in forms..
Report Property pallette:
Other Parameters=Customer_Name
Query names=Select * from s_Customer where Customer_Name=:rep(the text item)
then in forms the button trigger is when button pressed.below is the code:
declare
v_Rep varchar2(100);
repid report_object;
Begin
repid := find_report_object('report');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER,’s_customer=’||:Dept.rep);
v_rep := run_report_object(repid);
end;
advance tnx to all

Hi,
You need to bulid a parameter list.
This is a code sample to run a report from Forms:
(Place it on a button when-button-pressed trigger, to run the report).
DECLARE
     repid REPORT_OBJECT;
     v_rep VARCHAR2(100);
     rep_status VARCHAR2(20);
-- this is the parameter list
     pl_id ParamList;
pl_name VARCHAR2(10) := 'tempdata';
BEGIN
-- try to find the parameter list
pl_id := Get_Parameter_List(pl_name);
          IF Id_Null(pl_id) THEN
               -- if parameter lsit does not exist
               -- create it
          pl_id := Create_Parameter_List(pl_name);
          IF Id_Null(pl_id) THEN
          Message('Error creating parameter list '||pl_name);
          RAISE Form_Trigger_Failure;
          END IF;
          ELSE
          Message('Parameter list '||pl_name||' already exists!');
          -- destroy it to clear old parameters
          -- and create it again;
          destroy_parameter_list(pl_id);
          pl_id := Create_Parameter_List(pl_name);
          END IF;
Add_Parameter(pl_id,'p_customer_name',TEXT_PARAMETER,:customer.cust_name);
-- add as many parameters as needed
-- finally run the report passing your parameter list
     repid := FIND_REPORT_OBJECT('report4');
     v_rep := RUN_REPORT_OBJECT(repid, pl_id);
               Exception
                    when others then
                    Message('Error running report. '||sqlerrm, acknowledge);
END;
Also, you need to create the parameter in your report:
1.- Open your report on reports builder.
2.- Find the "Data Model" node, and the "User parameters" node.
3.- Create a parameter: p_customer_name
4.- Modify your sql from:
Select * from S_customer
TO:
Select * from S_customer
where Customer_Name=:p_customer_name;
If you want this parameter to be optional, check the reports online help on "Lexical References".
Have fun,
Hugo

My i phone ringer is giving me a lot of trouble. It does not play any sound or music, the incoming call ringtone is working, but no music is playing. The problem itself disappears , and then reoccurs again. Anybody with same kind of problem, plz help !!!

the iphone ringer is not working, the incoming call ringtones are playing , but ringer volume bar has disappeared. The problem itself gets fixed at times but i'm having a real tough time . I have almost tried evrything from resetting the phone, switiching it off and do it gain, but nothing seems to work. A nybody with anykind of knowledge reguarding this problem, please help!!

Unfortunately, this is not Apple, but just the iPod Community forum, of iPod Classic end users, who shares your angst. You can post it to iPod Feedback

Very Weird Problem plz help!!

Here's what happened:
Every night before I go to bed, I charge my iPhone 3g. Last night I plugged it in to charge it,
and I made sure that it saidmitnwas charging before I went to sleep. When I went to unplug it this morning, it said that the battery was only at 20% left. I checked the plug ( where usb
plug plugs into wall adapter), and it wasn't fully plugged in. This is where it gets weird.
I pushed the USB ug fully into the wall adapter, it came up saying it was fully charged,
and I unplugged it from the wall outlet. I keep the charger in a place where myself or
nothing else would have been able to unplug it. It seems to be working fine now, but this was really weird.
It said it had only 20% battery life left, and then one second later it was fully charged.
Plz help me!

possibly the screen had frozen during a display, or hadbeen about to display the 20% status and froze. It still took the full charge and the displayed an action in its cache memory that was no longer accurate hence it then flicked to showing full charge.

Problem plz help in this

Similar Messages

Maybe you are looking for