BO type code from BO name

Hi,
I need to get the Type code of the BO from its name. Is it possible? if yes, how??
Thanks and advance,
Venu JS

Hi Venu,
Yes it is possible.
Firstly it is highly recommended that you will get acknowledged with the entire GDT list.
You can find it in the portal under the following selection:
Application Platform-->Quick links (on the right).
Please search for the GDT : BusinessObjectTypeCode.
You will find their the entire BOs list and their GDTs.
Best regards,
Gal.

Similar Messages

Can't type code from 2nd device to 1st device to enable sync-ing.

Im syncing my laptop to my pc.
I have created a sync account on the pc.
When I try to add a device, I am unable to type any codes on either computer or laptop.
As I have both screens open at the same time, pls confirm which code I am taking and putting on to which computer.
Why can't I type any codes at all????

Are you logged on to the Sync server on the PC?
You can also enter the account name (email address) and password and the Sync key.
* Open "Tools > Options > Sync" or "Firefox > Set Up Sync"
* Click "Set Up Firefox Sync" to go to "Firefox Sync Setup"
* Click "I already have a Firefox Sync account" : Connect
* Click "I don't have the device with me" at the bottom

Document type codes

Hi, where can my addon read the document type codes from ? I mean the two letter abbreviations e.g. DN for delivery note, RE for return, PD for goods receipt, used in references to documents by an item. These codes are language dependent and I want to make my addon consistent with B1.
Thanks for answer.
Jan

You won't be reading the alpha-numeric values but rather the TransType (Transaction Type)
For Example in table OJDT (the journal table) you would look at field TransType
TransType
15     Delivery
16     Returns
13     A/R Invoice
14     A/R Credit Memo
132     Correction Invoice
20     Goods Receipt PO
21     Goods Returns
18     A/P Invoice
19     A/P Credit Memo
69     Landed Costs
163     Correction AP invoice
25     Deposit
46     Vendor Payment
57     Check for Payment
76     Postdated Deposit
-2     Opening Balance
-3     Closing Balance
30     Journal Entry
58     Stock List
59     Goods Receipt
60     Goods Issue
67     Stock Transfers
68     Work Instructions
162     Material revaluation
-1     All Transactions

"File Type Codes" in OS-X

I've just learned that these codes were probably discontinued after OS-9. Here's why I care:
I have many QuickMail messages saved to various places on my hard disk. While I can still run QM, this surely will not be possible much longer. What I'd like to do is to change all those files to TEXT files, so I can always count on being able to read them. I thought I could use spot light to search for the QuickMail file type code then somehow change it to TEXT [or to that of Apple Mail, my present client], but that was OS 9 and other utilities, not X. Another problem is now I don't even know the QuickMail file type code.

Regarding QuickMail, AFAIK the format was not plain text (see this format description). If you have serious stuff to convert (rather than just a few messages), take a look at Email Alchemy. You may find additional options on the eMailman site.
Regarding type and creator codes, there's quite a bit of confusion about them. These are two 4-character codes used by Mac OS to determine what a file is (type) and what application created it (creator). They are metadata, and they are not "embedded" in the file; rather, they are maintained in a distinct database. Mac OS X still used them (alongside other methods), but, in Tiger, they were officially replaced by UTIs. They were still honoured by the OS until SL, when OS support for the creator code was dropped. (Sparking a fascinating controversy among Mac afficionados.) Both codes are still there, and you can see or change them with a suitable app (eg, Quick Change), but only the type code does anything useful -- if no other file metadata is available (such as filename extension), Mac OS X will use it.
Keep in mind that the type code is metadata -- changing it does not change anything in the file itself. For instance, you can change the type code from TEXT to JPEG, but that doesn't mean you've magically transmogrified plain text into a picture. You've merely told the OS to treat this file as a picture, which will cause an error.

Accessing comapny code from the source file name

Hi,
Iam doing FILE FILE to scenario.
My source file name is XXXX237061606.txt. (XXXX is company code)
My requirement is
Based on company code from the source file name; I need to send the file to the corresponding receiver.
How to retrieve the company code from the source file name?
Thanks,
Hem.

hem chand wrote:>
> Hi Varun,
>
> Could u please provide me detailed procedure to get the company code.
>
> Reg,
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File","FileName");
String ourSourceFileName = conf.get(key);
This will get you the File name...TRuncate it to extract company code...
Then have a mapping program with the receivers message type which is persent under SAP BASIS component....
There map to the required receiver by getting the file name above..
Create an int mapping for the above mapping and use that in ur enhanced recv determination

ORA-27369: job of type EXECUTABLE failed with exit code: Is a name file

I am getting this error when I try to execute a file using /bin/sh , I create the file, do a chmod on the file and remove the file but I am have trouble executing it even though I can execute it form the command line.
ORA-27369: job of type EXECUTABLE failed with exit code: Is a name file
STANDARD_ERROR="Segmentation Fault"
139
EXTERNAL_LOG_ID="job_77927_1275",
ORA-27369: job of type EXECUTABLE failed with exit code: Transport endpoint is n
ot connected
STANDARD_ERROR="Abort - core dumped
here is the code
DBMS_SCHEDULER.CREATE_JOB(job_name=>'CHMOD_ON_CCL',
job_type=>'EXECUTABLE',
job_action=>'/bin/chmod',
number_of_arguments=>2,
enabled=>false,
auto_drop=>true);
DBMS_SCHEDULER.set_attribute('CHMOD_ON_CCL', 'credential_name', 'SCHED_USER');
DBMS_SCHEDULER.SET_JOB_ARGUMENT_VALUE(job_name=>'CHMOD_ON_CCL',
argument_position=>1,
argument_value=>'777');
DBMS_SCHEDULER.SET_JOB_ARGUMENT_VALUE(job_name=>'CHMOD_ON_CCL',
argument_position=>2,
argument_value=>l_directory || '/' || loc_file_name);
DBMS_SCHEDULER.ENABLE('CHMOD_ON_CCL');
--execute the CCL file, this will run the scheduler
DBMS_SCHEDULER.CREATE_JOB(job_name=>'EXECUTE_CCL',
job_type=>'EXECUTABLE',
job_action=>'/bin/sh',
number_of_arguments=>1,
enabled=>false,
auto_drop=>true);
DBMS_SCHEDULER.set_attribute('EXECUTE_CCL', 'credential_name', 'SCHED_USER');
DBMS_SCHEDULER.SET_JOB_ARGUMENT_VALUE(job_name=>'EXECUTE_CCL',
argument_position=>1,
argument_value=>l_directory || '/' || loc_file_name);
DBMS_SCHEDULER.ENABLE('EXECUTE_CCL');
--remove CCL file after scheudler runs
DBMS_SCHEDULER.CREATE_JOB(job_name=>'REMOVE_CCL',
job_type=>'EXECUTABLE',
job_action=>'/bin/rm',
number_of_arguments=>1,
enabled=>false,
auto_drop=>true);
DBMS_SCHEDULER.set_attribute('REMOVE_CCL', 'credential_name', 'SCHED_USER');
DBMS_SCHEDULER.SET_JOB_ARGUMENT_VALUE(job_name=>'REMOVE_CCL',
argument_position=>1,
argument_value=>l_directory || '/' || loc_file_name);
DBMS_SCHEDULER.ENABLE('REMOVE_CCL');
"

No problem at all, you can do the same by getting the output from env and unset the variables that are defined there manually. Start with
unset PATH
unset ORACLE_HOME
unset LD_LIBRATY_PATH
ad start your script again from this environment. The scheduler launches the jobs in an environment where hardly any variable is defined.
R.

File type from file name

Hi,
Is there any standard method to get a file type from file name?
File name can be C:\test.doc or C:\test(test is file) i.e. with or without file type extension.
...Naddy

You can use the Function module PC_SPLIT_COMPLETE_FILENAME
export paramter extension will tell the type of file
Sample Output
Import     COMPLETE_FILENAME     C:\TEST.TXT
Import     CHECK_DOS_FORMAT
Export     DRIVE     C
Export     EXTENSION     TXT
Export     NAME     TEST
Export     NAME_WITH_EXT     TEST.TXT
Export     PATH     \

After deleting an email address from Contacts is there any way of preventing it from popping up in the To: field of Mail when one starts to type in a contact name.

After deleting an email address from Contacts is there any way of preventing it from popping up in the To: field of Mail when one starts to type in a contact name?

if you are not on ios 6, then all you can do is wait. if you have deleted the address from your contact list, then it will live on for a while in your 'recently used' addresses. as you use new addresses, those older ones fall down the list, and eventually fall off altogether (unless you use them again). Have patience, it will go away.
Or do the update....

Error when trying to create a types jar from a web service WSDL

Hi,
I generated a WSDL from a web service. When I try to generate a types jar from that WSDL in another project, I get an error:
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
com.bea.workshop.webservices.servicecontrol.ui.except.TypeGenerationFailedException: Buildfile: C:\eclipsews\.metadata\com.bea.workshop.webservices.servicecontrol.ui\build-dir\build.xml
Trying to override old definition of task wsgen
build:
build-types:
clean-types:
[echo] Deleting types directory c:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474
[echo] Deleting types jar C:\eclipsews\AAATest\WebContent\WEB-INF\lib\CaregiverEBillingMasterServiceServiceTypes_xmlbeans_apache.jar
[mkdir] Created dir: C:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474
generate-src-code:
[echo] Generating types of family xmlbeans_apache from WSDL at file:/C:/eclipsews/AAATest/src/test/CaregiverEBillingMasterServiceService.wsdl, all services. Outputting to c:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474
[typesGen] Generating complex Java types for schema types in WSDL file:/C:/eclipsews/AAATest/src/test/CaregiverEBillingMasterServiceService.wsdl. Outputting to C:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474 ...
[typesGen] [WARNING] Generating array which is non-compliant with JaxRPC 1.1 for XML name: t=ArrayOfTreatmentDetailItem@http://org/abc/claims/caregiver/ebilling/services
[typesGen] [WARNING] Generating array which is non-compliant with JaxRPC 1.1 for XML name: t=ArrayOfDocumentTypeAutoPayWrapper_literal@java:org.abc.claims.caregiver.ebilling.services.util
[typesGen] [WARNING] Generating array which is non-compliant with JaxRPC 1.1 for XML name: t=ArrayOfJavaLangint_literal@java:org.abc.claims.caregiver.ebilling.services
[typesGen] [WARNING] Generating array which is non-compliant with JaxRPC 1.1 for XML name: t=ArrayOfDocumentSubmissionHierarchy@http://org/abc/claims/caregiver/ebilling/services
[typesGen] [WARNING] Generating array which is non-compliant with JaxRPC 1.1 for XML name: t=ArrayOfMessageCode@http://org/abc/claims/caregiver/ebilling/services
[typesGen] [WARNING] Generating array which is non-compliant with JaxRPC 1.1 for XML name: t=ArrayOfFeeCodeType@http://org/abc/claims/caregiver/ebilling/services
[typesGen] [WARNING] Generating array which is non-compliant with JaxRPC 1.1 for XML name: t=ArrayOfBatchMessage@http://org/abc/claims/caregiver/ebilling/services
[typesGen] [WARNING] Generating array which is non-compliant with JaxRPC 1.1 for XML name: t=ArrayOfArrayOfJavaLangstring_literal@java:org.abc.claims.caregiver.ebilling.services.util
[typesGen] [WARNING] Generating array which is non-compliant with JaxRPC 1.1 for XML name: t=ArrayOfJavaLangstring_literal@java:org.abc.claims.caregiver.ebilling.services.util
compile-src-code:
[echo] Compiling source files from c:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474 to c:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474
[javac] Compiling 298 source files to C:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474
[javac] ----------
[javac] 1. ERROR in C:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474\com\abc\claims\caregiver\ebilling\FeeCodeDocument.java (at line 51)
[javac]      public static com.abc.claims.caregiver.ebilling.FeeCodeDocument parse(java.lang.String xmlAsString) throws org.apache.xmlbeans.XmlException {
[javac]      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[javac] No exception of type XmlException can be thrown; an exception type must be a subclass of Throwable
[javac] ----------
[javac] 2. ERROR in C:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474\com\abc\claims\caregiver\ebilling\FeeCodeDocument.java (at line 54)
[javac]      public static com.abc.claims.caregiver.ebilling.FeeCodeDocument parse(java.lang.String xmlAsString, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException {
[javac]      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[javac] No exception of type XmlException can be thrown; an exception type must be a subclass of Throwable
[javac] ----------
[javac] 3. ERROR in C:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474\com\abc\claims\caregiver\ebilling\FeeCodeDocument.java (at line 58)
[javac]      public static com.abc.claims.caregiver.ebilling.FeeCodeDocument parse(java.io.File file) throws org.apache.xmlbeans.XmlException, java.io.IOException {
[javac]      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[javac] No exception of type XmlException can be thrown; an exception type must be a subclass of Throwable
[javac] ----------
[javac] 4. ERROR in C:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474\com\abc\claims\caregiver\ebilling\FeeCodeDocument.java (at line 61)
[javac]      public static com.abc.claims.caregiver.ebilling.FeeCodeDocument parse(java.io.File file, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException, java.io.IOException {
[javac]      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[javac] No exception of type XmlException can be thrown; an exception type must be a subclass of Throwable
[javac] ----------
[javac] 5. ERROR in C:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474\com\abc\claims\caregiver\ebilling\FeeCodeDocument.java (at line 64)
[javac]      public static com.abc.claims.caregiver.ebilling.FeeCodeDocument parse(java.net.URL u) throws org.apache.xmlbeans.XmlException, java.io.IOException {
[javac]      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[javac] No exception of type XmlException can be thrown; an exception type must be a subclass of Throwable
[javac] ----------
[javac] 6. ERROR in C:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474\com\abc\claims\caregiver\ebilling\FeeCodeDocument.java (at line 67)
[javac]      public static com.abc.claims.caregiver.ebilling.FeeCodeDocument parse(java.net.URL u, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException, java.io.IOException {
[javac]      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[javac] No exception of type XmlException can be thrown; an exception type must be a subclass of Throwable
=== snipped here due to huge file size ===
[javac] 2680. ERROR in C:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474\org\xfa\schema\xfaData\x10\SignatureDocument.java (at line 99)
[javac]      public static org.xfa.schema.xfaData.x10.SignatureDocument parse(org.apache.xmlbeans.xml.stream.XMLInputStream xis, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException, org.apache.xmlbeans.xml.stream.XMLStreamException {
[javac]      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[javac] No exception of type XmlException can be thrown; an exception type must be a subclass of Throwable
[javac] ----------
[javac] 2681. ERROR in C:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474\org\xfa\schema\xfaData\x10\SignatureDocument.java (at line 103)
[javac]      public static org.apache.xmlbeans.xml.stream.XMLInputStream newValidatingXMLInputStream(org.apache.xmlbeans.xml.stream.XMLInputStream xis) throws org.apache.xmlbeans.XmlException, org.apache.xmlbeans.xml.stream.XMLStreamException {
[javac]      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[javac] No exception of type XmlException can be thrown; an exception type must be a subclass of Throwable
[javac] ----------
[javac] 2682. ERROR in C:\development\wlwBuild\XCaregiverEBillingMasterServiceService1297810259474\org\xfa\schema\xfaData\x10\SignatureDocument.java (at line 107)
[javac]      public static org.apache.xmlbeans.xml.stream.XMLInputStream newValidatingXMLInputStream(org.apache.xmlbeans.xml.stream.XMLInputStream xis, org.apache.xmlbeans.XmlOptions options) throws org.apache.xmlbeans.XmlException, org.apache.xmlbeans.xml.stream.XMLStreamException {
[javac]      ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
[javac] No exception of type XmlException can be thrown; an exception type must be a subclass of Throwable
[javac] ----------
[javac] 2682 problems (2682 errors)
BUILD FAILED
C:\eclipsews\.metadata\com.bea.workshop.webservices.servicecontrol.ui\build-dir\build.xml:73: The following error occurred while executing this line:
C:\eclipsews\.metadata\com.bea.workshop.webservices.servicecontrol.ui\build-dir\build.xml:107: The following error occurred while executing this line:
C:\eclipsews\.metadata\com.bea.workshop.webservices.servicecontrol.ui\build-dir\build.xml:181: Compile failed; see the compiler error output for details.
Total time: 17 seconds
     at com.bea.workshop.webservices.servicecontrol.ui.util.TypesGenerationScript.run(TypesGenerationScript.java:197)
     at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:113)
Caused by: org.eclipse.core.runtime.CoreException: C:\eclipsews\.metadata\com.bea.workshop.webservices.servicecontrol.ui\build-dir\build.xml:73: The following error occurred while executing this line:
C:\eclipsews\.metadata\com.bea.workshop.webservices.servicecontrol.ui\build-dir\build.xml:107: The following error occurred while executing this line:
C:\eclipsews\.metadata\com.bea.workshop.webservices.servicecontrol.ui\build-dir\build.xml:181: Compile failed; see the compiler error output for details.
     at org.eclipse.ant.core.AntRunner.handleInvocationTargetException(AntRunner.java:451)
     at org.eclipse.ant.core.AntRunner.run(AntRunner.java:383)
     at com.bea.workshop.webservices.servicecontrol.ui.util.TypesGenerationScript.run(TypesGenerationScript.java:185)
     ... 1 more
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I was previously able to generate a types jar just fine from the web service's WSDL. Recently, I made some changes to the web service. Apparently, these changes to the web service now cause the WSDL to be unparseable when trying to generate types jars.
Any ideas?

The WSDL is generated from my web service. I made heavy revisions to my web service which, in turn, affected the resultant WSDL. The changes I made to my web service were almost exclusively related to object substitution. For example, prior to the change I was referencing object A from my web service; after the change, I was referencing object B. The objects that I'm referring to are XMLBeans, if that matters. I can't really describe it more than that without actually showing you the WSDL.
I would post the WSDL file here to allow you to try to create a types jar out of it, but the WSDL exceeds the 30000 character limit for this field. There is no way for me to attach the WSDL to this post.

Error while generating java client code from wsdl file

I am trying to generate a java client code from WSDL file um_workflowSaveCreateProfile.wsdl which includes um_workflowSaveCreateProfile_interface.wsdl file, so I am keeping both the files in the same folder and trying to generate the client code but it is showing me the below error highlighted .
um_workflowSaveCreateProfile.wsdl
<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:xsd="E:/DIPPWF/XMLSchema" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:oblix="http://www.oblix.com/" xmlns:obinterface="http://www.oblix.com/wsdl/um_workflowSaveCreateProfile_interface" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://www.oblix.com/wsdl/um_workflowSaveCreateProfile" targetNamespace="http://www.oblix.com/wsdl/um_workflowSaveCreateProfile">
     <import namespace="D:/DIPP/WSDL/um_workflowSaveCreateProfile_interface" location="um_workflowSaveCreateProfile_interface.wsdl"/>
     <service name="OblixIDXML_um_workflowSaveCreateProfile_Service">
          <port name="OblixIDXML_um_workflowSaveCreateProfile_Port" binding="obinterface:OblixIDXML_um_workflowSaveCreateProfile_Binding">
               <soap:address location="http://localhost:7777/identity/oblix/apps/userservcenter/bin/userservcenter.cgi"/>
          </port>
     </service>
</definitions>
um_workflowSaveCreateProfile_interface.wsdl
<definitions xmlns="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:oblix="http://www.oblix.com/" xmlns:oblixxmllocalschema="http://www.oblix.com/OblixXMLLocalSchema" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:tns="http://www.oblix.com/wsdl/um_workflowSaveCreateProfile_interface" targetNamespace="http://www.oblix.com/wsdl/um_workflowSaveCreateProfile_interface">
     <types>
          <xsd:schema targetNamespace="http://www.oblix.com/" elementFormDefault="qualified"
               xmlns="http://www.oblix.com/"
               xmlns:xsd="http://www.w3.org/2001/XMLSchema">
                    <xsd:include schemaLocation="../XMLSchema/common_parameters.xsd" />
                    <xsd:include schemaLocation="../XMLSchema/common_authentication.xsd" />
                    <xsd:include schemaLocation="../XMLSchema/workflowSaveCreateProfile.xsd" />
          </xsd:schema>
          <xsd:schema targetNamespace="http://www.oblix.com/OblixXMLLocalSchema" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
               <xsd:element name="request">
                    <xsd:complexType>
                         <xsd:sequence>
                              <xsd:element name="params">
                                   <xsd:complexType>
                                        <xsd:sequence>
                                             <xsd:element ref="oblix:ObWorkflowName"/>
                                             <xsd:element ref="oblix:ObDomainName"/>
                                             <xsd:element ref="oblix:ObWfComment" minOccurs="0"/>
                                             <xsd:element ref="oblix:noOfFields"/>
                                             <xsd:element ref="oblix:AttributeParams"/>
                                        </xsd:sequence>
                                   </xsd:complexType>
                              </xsd:element>
                         </xsd:sequence>
                         <xsd:attribute name="version" type="xsd:string" use="optional"/>
                         <xsd:attribute name="application" type="xsd:string" use="required" />
                         <xsd:attribute name="function" type="xsd:string" use="required" />
                         <xsd:attribute name="mode" type="xsd:string" use="optional"/>
                    </xsd:complexType>
               </xsd:element>
          </xsd:schema>
     </types>
     <message name="OblixIDXMLInput">
          <part name="authentication" element="oblix:authentication"/>
          <part name="request" element="oblixxmllocalschema:request"/>
     </message>
     <message name="OblixIDXMLOutput">
          <part name="body" element="oblix:Oblix"/>
     </message>
     <portType name="OblixIDXMLPortType">
          <operation name="OblixIDXML_um_workflowSaveCreateProfile">
               <input message="tns:OblixIDXMLInput"/>
               <output message="tns:OblixIDXMLOutput"/>
          </operation>
     </portType>
     <binding name="OblixIDXML_um_workflowSaveCreateProfile_Binding" type="tns:OblixIDXMLPortType">
          <soap:binding style="document" transport="http://schemas.xmlsoap.org/soap/http"/>
          <operation name="OblixIDXML_um_workflowSaveCreateProfile">
               <soap:operation soapAction="http://www.oblix.com/"/>
               <input>
                    <soap:body use="literal"/>
               </input>
               <output>
                    <soap:body use="literal"/>
               </output>
          </operation>
     </binding>
</definitions>
I am using WSDL2 Java for generating the client code .
Please suggest where am I wrong .
E:\axis2-1.4\bin>WSDL2Java -uri E:\DIPPWF\um_workflowSaveCreateProfile.wsdl -p R
ND -d adb -s -o build\client--http-proxy-host 10.74.93.35 --http-proxy-port 80
Using AXIS2_HOME: E:\axis2-1.4
Using JAVA_HOME: C:\Program Files\Java\jdk1.6.0_02
Retrieving document at 'E:\DIPPWF\um_workflowSaveCreateProfile.wsdl'.
Retrieving document at 'um_workflowSaveCreateProfile_interface.wsdl', relative t
o 'file:/E:/DIPPWF/um_workflowSaveCreateProfile.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/common_parameters.xsd', relative to 'f
ile:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/common_authentication.xsd', relative t
o 'file:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/workflowSaveCreateProfile.xsd', relati
ve to 'file:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'navbar.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/workfl
owSaveCreateProfile.xsd'.
Retrieving schema at 'searchform.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/wo
rkflowSaveCreateProfile.xsd'.
Retrieving schema at 'component_basic.xsd', relative to 'file:/E:/DIPPWF/XMLSche
ma/workflowSaveCreateProfile.xsd'.
Retrieving schema at 'displaytype.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/c
omponent_basic.xsd'.
Retrieving schema at 'error.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/compone
nt_basic.xsd'.
Retrieving schema at 'component_workflowTicket.xsd', relative to 'file:/E:/DIPPW
F/XMLSchema/workflowSaveCreateProfile.xsd'.
Retrieving document at 'E:\DIPPWF\um_workflowSaveCreateProfile.wsdl'.
Retrieving document at 'um_workflowSaveCreateProfile_interface.wsdl', relative t
o 'file:/E:/DIPPWF/um_workflowSaveCreateProfile.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/common_parameters.xsd', relative to 'f
ile:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/common_authentication.xsd', relative t
o 'file:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'E:/DIPPWF/XMLSchema/workflowSaveCreateProfile.xsd', relati
ve to 'file:/E:/DIPPWF/um_workflowSaveCreateProfile_interface.wsdl'.
Retrieving schema at 'navbar.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/workfl
owSaveCreateProfile.xsd'.
Retrieving schema at 'searchform.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/wo
rkflowSaveCreateProfile.xsd'.
Retrieving schema at 'component_basic.xsd', relative to 'file:/E:/DIPPWF/XMLSche
ma/workflowSaveCreateProfile.xsd'.
Retrieving schema at 'displaytype.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/c
omponent_basic.xsd'.
Retrieving schema at 'error.xsd', relative to 'file:/E:/DIPPWF/XMLSchema/compone
nt_basic.xsd'.
Retrieving schema at 'component_workflowTicket.xsd', relative to 'file:/E:/DIPPW
F/XMLSchema/workflowSaveCreateProfile.xsd'.
*[ERROR] More than one part for message OblixIDXMLInput*
org.apache.axis2.description.WSDL11ToAxisServiceBuilder$WSDLProcessingException:
More than one part for message OblixIDXMLInput
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.addQNameRefer
ence(WSDL11ToAxisServiceBuilder.java:1162)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.addQNameRefer
ence(WSDL11ToAxisServiceBuilder.java:1085)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateBindi
ng(WSDL11ToAxisServiceBuilder.java:686)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateEndpo
int(WSDL11ToAxisServiceBuilder.java:538)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateEndpo
ints(WSDL11ToAxisServiceBuilder.java:489)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateServi
ce(WSDL11ToAxisServiceBuilder.java:363)
at org.apache.axis2.description.WSDL11ToAllAxisServicesBuilder.populateA
llServices(WSDL11ToAllAxisServicesBuilder.java:107)
at org.apache.axis2.wsdl.codegen.CodeGenerationEngine.<init>(CodeGenerat
ionEngine.java:147)
at org.apache.axis2.wsdl.WSDL2Code.main(WSDL2Code.java:35)
at org.apache.axis2.wsdl.WSDL2Java.main(WSDL2Java.java:24)
Exception in thread "main" org.apache.axis2.wsdl.codegen.CodeGenerationException
: Error parsing WSDL
at org.apache.axis2.wsdl.codegen.CodeGenerationEngine.<init>(CodeGenerat
ionEngine.java:153)
at org.apache.axis2.wsdl.WSDL2Code.main(WSDL2Code.java:35)
at org.apache.axis2.wsdl.WSDL2Java.main(WSDL2Java.java:24)
Caused by: org.apache.axis2.AxisFault: More than one part for message OblixIDXML
Input
at org.apache.axis2.AxisFault.makeFault(AxisFault.java:430)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateServi
ce(WSDL11ToAxisServiceBuilder.java:397)
at org.apache.axis2.description.WSDL11ToAllAxisServicesBuilder.populateA
llServices(WSDL11ToAllAxisServicesBuilder.java:107)
at org.apache.axis2.wsdl.codegen.CodeGenerationEngine.<init>(CodeGenerat
ionEngine.java:147)
... 2 more
Caused by: org.apache.axis2.description.WSDL11ToAxisServiceBuilder$WSDLProcessin
gException: More than one part for message OblixIDXMLInput
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.addQNameRefer
ence(WSDL11ToAxisServiceBuilder.java:1162)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.addQNameRefer
ence(WSDL11ToAxisServiceBuilder.java:1085)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateBindi
ng(WSDL11ToAxisServiceBuilder.java:686)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateEndpo
int(WSDL11ToAxisServiceBuilder.java:538)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateEndpo
ints(WSDL11ToAxisServiceBuilder.java:489)
at org.apache.axis2.description.WSDL11ToAxisServiceBuilder.populateServi
ce(WSDL11ToAxisServiceBuilder.java:363).
Thanks in advance.
akshay

Hello,
Were you able to resolve this issue ?
I am seeing the same issue and at my wits end.
regards
Amit

RE: Polymorphism - retrieving type information from thedatabase or how

Don,
Ok but if I was to model a real restaurant, I would then have a head chef
that can then delegate to other chefs. This head chef would have the
additional task of coordinating the completion of subservient chefs. This
does not and would not mean that the head chef is stuck (or partitioned) in
one part of the kitchen. Further a head chef would most likely also be a
chef so that he would be running around the kitchen using and interacting
with different objects to get his part of the recipe completed. Then once
all chefs have completed their part of the recipe the head chef could return
the meal.
I would also point out that it does not make sense to me to be talking about
the chef and its ability to scale. I would look that the resource limited
devices that must be used to prepare meals to see scalability. In this case
the grill, the stove and the microwave. Scalability of the restaurant is a
function of the amount of resource limited devices versus the number of
process (i.e. chefs) that need to use those devices concurrently and the
amount of time they require access to those devices. By talking about chefs
as if they are the scalability limiting factor seems to bring us back to the
notion that the chef is a manager object that is shared. And again I come
back to the question, why?
You may now think that in a real restaurant, there are only so many chefs so
why not make it a shared service? Well in a real restaurant there are only
so many of any object, but this is not a consideration in our restaurant
model. In our "virtual" restaurant hiring a chef is as easy as:
Chef = new;
And of course chefs are of zero mass so there can be a whole lot in the
kitchen. Now assuming the Grill, Stove and Microwave map to physical
objects in our computing environment, then that is the limiting factor and
are therefore partitioned. Whenever communication has to go through a
single source, then scalability breaks down. I fear that too many people
make shared objects and create communication bottlenecks where they simply
don't exist. The only place your scalability bottlenecks should exist is in
the actual resource limited objects of your computing environment. Simply
said, if something isn't a resource limited object, then why is it shared?
If anyone is not clear how to architect an application independently of the
business model, then I would suggest looking at various framework products
and reading some technical architecture white papers to get a different, and
possibly enlightening, point of view.
Mark Perreira
Sage IT Partners.
-----Original Message-----
From: Don Nelson [mailto:[email protected]]
Sent: Wednesday, June 17, 1998 9:04 AM
To: Mark Perreira
Cc: [email protected]
Subject: RE: Polymorphism - retrieving type information from the
database
Mark,
First, I completely agree about the naming. I purposely used rather
euphamistic names for these "managers", since I see many convoluted names
for common things in various applications. But that is a topic for another
thread...
Simply because there is a "manager" of some type, does not imply that it is
chained to a particular duty. However, let's look at a real life case. In
a large restaurant, you would rarely see a chef chopping carrots or serving
dishes to customers. Those are the responsibilities of the sous-chef and
the waiter. So, we see that the chef does not really follow the food
around. Why not? Because it simply doesn't scale. When scalability isn't
a problem, (the restaurant isn't that popular, for example) the chef has
some lattitude to accept more responsibility, and might even get involved
with purchasing, etc.
In the real world, the more scalable something has to be, the narrower the
responsibilities are for each of the participating members.
Don
At 12:59 AM 6/17/98 -0700, Mark Perreira wrote:
Don,
One thing that always baffles me is when should an Object get the moniker
"Manager." This practice seems to tell me a couple of things about these
objects. In general when someone makes reference to a "Manager" objectthat
it is probably a service object and probably contains no or very little
attribution. The question is why? If I am developing an object model why
am I thinking about such implementation issues.
Surely if you are trying to model cooking an egg I would not see
"SustenancePreparationManager" in your model. Using a more common term I
would still be alarmed to see "CookManager" in your model. What does the
CookManager manage? Does it manage other cooks or eggs. Maybe it shouldbe
called an EggManager, but that doesn't make sense. How about just Cook.
There that seems like the real world. And this brings me to a problem in
the analogy. Conjuring up managers in a model can sometimes make you missa
container. For example, I would say that if we wanted to model the real
world, then eggs is a specialization of ingredient that is contained by
recipe that can be given to a cook to be prepared.
I may have many cooks (objects) that can prepare recipes and my application
architecture not the object model needs to deal with how to best let those
cooks utilize the grill, stove and microwave that sits on different
partitions on my server. My cooks can move around and when they do they
take their ability to know how to cook with them. In the real world Iwould
expect a cook to use the right appliance to prepare the recipe based on its
contents. I would not chain every cook to its appliance and them make me
responsible for giving the right cook the right recipe. This is what
managers can cause. They cause the consumer of cooks to know which cookcan
prepare what recipes based on where they are chained. This then makes me
know something about cooking. And if I don't know anything about cooking I
can only image what my egg would look like if I accidentally gave therecipe
to the cook stationed at the microwave.
Ok Ok, I have seen many architectures use facades to hide the fact that I
like to chain my cooks to their appliance. But what is that. I have gone
to restaurants and I don't know what a cook facade is. If I ask themanager
to present the cook facade manager employee I would probably be met by the
bouncer employee.
So what is the answer? Well for a start keep the application architecture
out of the model. The model should stand alone in describing the
interactions required to satisfy use cases. Second find an architecture
that describes a more responsibility driven design and how that design and
can map your business object behavior to a physical implementation with
appliances and cooking rules. And lastly, don't be so quick to chain your
cooks to their appliances. Give them some control over where they cook
their recipes, after all that is what they do.
Mark Perreira
Sage IT Partners.
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of Don Nelson
Sent: Tuesday, June 16, 1998 2:07 PM
To: Nick Willson
Cc: [email protected]
Subject: Re: Polymorphism - retrieving type information from the
database
This thread is switching context a bit, but I would add one thought tothe
idea of encapsulating behavior. One of the advantages to OO is that it
helps us model real world behavior. In the real world, I would not askan
invoice to stuff itself into an envelope and mail itself to its
customer; I
would not ask my vehicle to fuel itself or change its own oil; I wouldnot
tell an egg carton to ask one of its eggs to fry itself. Even if these
things were physically feasible, I could list a number of reasons why I
still wouldn't want to do them. That is why we haveVehicleRepairManagers
and SustenancePreparationManagers (aka, "Mechanics" and "Cooks").
Don
At 11:28 PM 6/15/98 -0700, Nick Willson wrote:
Tim,
You've had lots of good suggestions so I hope you won't mind an attempt
at another one. The consensus seems to be for your option (1) for the
Vehicle table, and Steve's example of a GenericConstraint (taking the
place of your Vehicle) is probably how most people would go about
answering your question. I don't have much to add to that, just wanted
to offer something about where the persistence mechanism lives and how
things look to clients that depend on it.
Suppose for a moment you think about the Vehicle classes' persistence as
being just one aspect of their behavior. In addition to persistence,
you might have to implement security, or locking for concurrent access,
or caching of vehicle objects to improve performance, and of course you
want to calculate the vehicle tax and probably do other things with
Vehicles too.
You can put the persistence aspect of Vehicles into a
PersistenceObjectManager, but then the others need somewhere too. If
you use a bunch of Managers (one for security, one for locking...) then
each class's behavior is scattered across these various Manager classes,
each of which has to know about many classes. Or if you use one Manager
class, it's going to know still more, plus you are forced to implement
all the behavior in (or at least via) that manager's partition.
An alternative would be to keep all the Vehicle classes' behavior
encapsulated together, so a client always makes requests to a Vehicle,
and the Vehicle delegates the implementation of requests to a chain of
handler objects that hang off the vehicle object (a handler for
security, another for persistence, and so on).
One of the nice things about this is, the handlers can be responsible
for going to another partition (if necessary), e.g. to perform
persistence operations, or for more business-specific operations like
tax calculations. And because the handlers are smart, you don't have to
put a lot of code into service objects, the SOs can stay pretty simple.
This isn't an approach you'll see in Express, so I hope of it's of some
interest.
General wrote:
Part 1.1 Type: Plain Text (text/plain)
Encoding: quoted-printable--
Nick Willson
SCAFFOLDS Consultant,
Sage IT Partners, Inc.
(415) 392 7243 x 373
[email protected]
The Leaders in Internet Enabled Enterprise Computing
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>>>
>>>
>>
>>
============================================
Don Nelson
Regional Consulting Manager - Rocky Mountain Region
Forte Software, Inc.
Denver, CO
Phone: 303-265-7709
Corporate voice mail: 510-986-3810
aka: [email protected]
============================================
"When you deal with higher numbers, you need higher math." - Hobbes
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>>
>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>
>
============================================
Don Nelson
Regional Consulting Manager - Rocky Mountain Region
Forte Software, Inc.
Denver, CO
Phone: 303-265-7709
Corporate voice mail: 510-986-3810
aka: [email protected]
============================================
"When you deal with higher numbers, you need higher math." - Hobbes
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

Don,
You are absolutely correct. But this is where I honestly think you are
missing the point. While the mail program sends the mail, my mail message
has an interface (i.e. send button) which can delegate that to the mail
program. This makes it nice and simple for me the consumer of the mail
program. It also means I can think of mailing by focusing on the interface
(i.e. the button). It would suck if every time I wanted to mail something I
had to identify the correct pop server to send it to (i.e the MailManager).
Mailing something is the collaboration of the setup information of the mail
program and my mail message. If I were to model this my mail object would
indeed have a send method that could delegate to the correct mail servers.
This is just simplicity of interface and it is a good practice in UI
development just as it is in business model development. A simpler
interface, I think we can all agree, provides for a better and quicker
understanding.
Mark Perreira
Sage IT Partners.
-----Original Message-----
From: [email protected]
[<a href="mailto:[email protected]">mailto:[email protected]]On</a> Behalf Of Don Nelson
Sent: Thursday, June 18, 1998 9:22 AM
To: Nick Willson
Cc: [email protected]
Subject: Re: Polymorphism - retrieving type information from the
database
Nick,
It turns out that your message does not, indeed send itself. Your mailing
program does that.
Don
At 11:54 PM 6/17/98 -0700, Nick Willson wrote:
Hey Don,
In the real world, no, you can't tell an invoice to put itself into anenvelope
and mail itself. You have to know about stamps and post boxes and wherethey
are located. But isn't it nice that in software you don't have to followthe
real world very closely if you don't want to?
Above the top left hand corner of this message I'm typing right now, thereis a
send button which lets me tell the message to 'stuff itself into anenvelope
and mail itself'. Why wouldn't you want to do that?
Don Nelson wrote:
This thread is switching context a bit, but I would add one thought to
the
idea of encapsulating behavior. One of the advantages to OO is that it
helps us model real world behavior. In the real world, I would not askan
invoice to stuff itself into an envelope and mail itself to its customer;I
would not ask my vehicle to fuel itself or change its own oil; I wouldnot
tell an egg carton to ask one of its eggs to fry itself. Even if these
things were physically feasible, I could list a number of reasons why I
still wouldn't want to do them. That is why we haveVehicleRepairManagers
and SustenancePreparationManagers (aka, "Mechanics" and "Cooks").
Don
At 11:28 PM 6/15/98 -0700, Nick Willson wrote:
Tim,
You've had lots of good suggestions so I hope you won't mind an attempt
at another one. The consensus seems to be for your option (1) for the
Vehicle table, and Steve's example of a GenericConstraint (taking the
place of your Vehicle) is probably how most people would go about
answering your question. I don't have much to add to that, just wanted
to offer something about where the persistence mechanism lives and how
things look to clients that depend on it.
Suppose for a moment you think about the Vehicle classes' persistence as
being just one aspect of their behavior. In addition to persistence,
you might have to implement security, or locking for concurrent access,
or caching of vehicle objects to improve performance, and of course you
want to calculate the vehicle tax and probably do other things with
Vehicles too.
You can put the persistence aspect of Vehicles into a
PersistenceObjectManager, but then the others need somewhere too. If
you use a bunch of Managers (one for security, one for locking...) then
each class's behavior is scattered across these various Manager classes,
each of which has to know about many classes. Or if you use one Manager
class, it's going to know still more, plus you are forced to implement
all the behavior in (or at least via) that manager's partition.
An alternative would be to keep all the Vehicle classes' behavior
encapsulated together, so a client always makes requests to a Vehicle,
and the Vehicle delegates the implementation of requests to a chain of
handler objects that hang off the vehicle object (a handler for
security, another for persistence, and so on).
One of the nice things about this is, the handlers can be responsible
for going to another partition (if necessary), e.g. to perform
persistence operations, or for more business-specific operations like
tax calculations. And because the handlers are smart, you don't have to
put a lot of code into service objects, the SOs can stay pretty simple.
This isn't an approach you'll see in Express, so I hope of it's of some
interest.
General wrote:
Part 1.1 Type: Plain Text (text/plain)
Encoding: quoted-printable--
Nick Willson
SCAFFOLDS Consultant,
Sage IT Partners, Inc.
(415) 392 7243 x 373
[email protected]
The Leaders in Internet Enabled Enterprise Computing
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>>>
>>>
>>
============================================
Don Nelson
Regional Consulting Manager - Rocky Mountain Region
Forte Software, Inc.
Denver, CO
Phone: 303-265-7709
Corporate voice mail: 510-986-3810
aka: [email protected]
============================================
"When you deal with higher numbers, you need higher math." - Hobbes--
Nick
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href="http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
>
>
============================================
Don Nelson
Regional Consulting Manager - Rocky Mountain Region
Forte Software, Inc.
Denver, CO
Phone: 303-265-7709
Corporate voice mail: 510-986-3810
aka: [email protected]
============================================
"When you deal with higher numbers, you need higher math." - Hobbes
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:<a href=
"http://pinehurst.sageit.com/listarchive/">http://pinehurst.sageit.com/listarchive/</a>>

Debugging ABAP Code From Within Webdynpro Application

Hello Experts,
We use ABAP RFC Function in Our Java Webdynpro application, We need to debug the parameters pass from the webdynpro application to the ABAP Function.
In order to do that we:
1. Defined a JCO connection with "Single Server Connection" as the Destination Type.
2. We have loged on to the relevant system and client using SAP GUI with the same user that run the webdynpro application.
3. We have activate the external debugging in se80 Utilities -> Settings
4. We have set an HTTP (external) breakpoint in the ABAP code,
As mentioned in the article:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/0e9a9d90-0201-0010-478e-991dbea73a30
However, we recieve a dump in the R3 system:
RFC_DEBUGGING_NO_DIALOG_USER
ShrtText
RFC debugging is only possible with dialog user
What happened?
You attempted to debug a program by RFC. However, in this destination
there is a user whose user type permits communication without dialog.
This means, for example, that debugging with a system user is not
possible.
What can you do?
Restart the program and take note of the following:
You can do one of the following:
1. You can change the user listed in the RFC destination and enter a
dialog user.
2. In the target system of RFC you can change the user type of the user
listed in the RFC destination to 'dialog'.
3. You can avoid this runtime error by omitting the RFC debugging.
If in the ABAP debugger the statement cursor points to the statement
(CALL FUNCTION ... DESTINATION), you must choose the function
'Execute'.
We checked and the user we use is defined as dialog in SU01 and the user that the webdynpro use to call the functio is the same user as was logged in.
What else should we do?
Thanks,
Eyal

Hello Eyal,
You mentioned the following..
1. Defined a JCO connection with "Single Server Connection" as the Destination Type. 2. We have loged on to the relevant system and client using SAP GUI with the same user that run the webdynpro application.*<---The system that you logged into is your source system*
3. We have activate the external debugging in se80 Utilities -> Settings
4. We have set an HTTP (external) breakpoint in the ABAP code,
and the name of the system defined in the RFC connection will be your target system.
As per the response (dump error message) in this target system you need to have a dialog user.
And this dialog user needs to be defined in the RFC destination that is being used to connect to the target system.
Regards,
Siddhesh

RMI tunneling: JNDI lookup fails with : Disconnected: Type code out of range, is -29

9iAS Release 2
When trying to tunnel through Apache to the OC4J_home instance using ...
http:ormi://<host>:<HTTPport>/<application> <admin><password>
and then looking up a JNDI name ...
TopicConnectionFactory connectionFactory =
(TopicConnectionFactory)new InitialContext(p).lookup("jms/myTopicConnectionFactory");
I get a NamingException thrown, with the message: Disconnected: Type code out of range, is -29.
The jms.xml file is correct. It works against a standalone OC4J instance (therefore no tunneling) ...
ormi://<host>:23791/<application> <admin><password>
I'm connecting from a standalone client and using the RMIInitialContextFactory, the tunneling is working (changing oc4j username/password gets a SecurityException). What's missing? Do you have to change the jndi name when tunneling? What does -29 mean in english?

Tunneling through the Apache HTTP server to an OC4J instance from remote standalone clients works on Linux installations of 9iAS but not on NT installations, failing with a 'Type Code out of range, is -29' error, JVM versions on client and server are the same. Also works against a standalone version of oc4j on NT, what's happening?

Help Editing code from a published html file with flash detection enabled from flash

hi guys ive publish a html file with flash detection enabled from flash
heres the code from the publish html:

<html lang="en">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>main</title>
<script language="javascript"> AC_FL_RunContent = 0; </script>
<script language="javascript"> DetectFlashVer = 0; </script>
<script src="AC_RunActiveContent.js" language="javascript"></script>
<script language="JavaScript" type="text/javascript">

</script>
</head>
<body bgcolor="#ffffff">


<script language="JavaScript" type="text/javascript">

</script>
<noscript>
     // Provide alternate content for browsers that do not support scripting
     // or for those that have scripting disabled.
       Alternate HTML content should be placed here. This content requires the Adobe Flash Player.
       <a href="http://www.macromedia.com/go/getflash/">Get Flash</a>
</noscript>
</body>
</html>
now since the default codes places my flash movie on upper left corner, ive made my own tables with the flash on it, how or where do i place this code to the upper codes?
<table width="100%" height="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
    <th valign="middle" scope="col"><table width="800" border="0" align="center" cellpadding="0" cellspacing="0">
      <tr>
        <th height="600" bgcolor="#333333" scope="col"><script type="text/javascript">
AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','wid th','800','height','600','src','main','quality','high','pluginspage','http://www.adobe.com /shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash','movie','main' ); //end AC code
</script><noscript><object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0" width="800" height="600">
          <param name="movie" value="main.swf">
          <param name="quality" value="high">
          <embed src="main.swf" quality="high" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" width="800" height="600"></embed>
        </object></noscript></th>
      </tr>
    </table></th>
</tr>
<tr>
    <td height="30" bgcolor="#990000"><table width="800" border="0" align="center" cellpadding="0" cellspacing="0">
      <tr>
        <th scope="col"><table width="800" border="0" cellspacing="0" cellpadding="0">
          <tr>
            <th scope="col"><div align="left" class="style1">Copyright 2009 St. Paul of the Cross Parish. All Rights reserved.</div></th>
            <th width="400" scope="col"><div align="right" class="style1">Usage outside our permissions guidelines requires our prior written consent.</div></th>
          </tr>
        </table></th>
      </tr>
    </table></td>
</tr>
</table>
Tnx in advance!

Hi
Can you tell me which version of dreamweaver you are using (and flash pro, if you have it), as the code you provided has element of a number of different versions (e.g. your js flash files are reasonably new, but your flash inserted into the html body is old, but with the cs3 version of flash player indicated!). Also the detect flash file is no longer required.
PZ

NetBeans: Calling code from other packages?

Normally, when I would call code from eclipse, I would type something like:
import +<package name>.<class name>+But somehow, this approach doesn't seem to work in NetBeans, how can I import code from another package? I can seem to import from the same package, but not a different one.
Edited by: px7659 on Jun 15, 2010 6:21 PM

px7659 wrote:
Normally, when I would call code from eclipse, I would type something like:
import +<package name>.<class name>+But somehow, this approach doesn't seem to work in NetBeans, how can I import code from another package? I can seem to import from the same package, but not a different one.Then the package is not part of the project. Did you perhaps forget to add the jar library in question?

BO type code from BO name

Similar Messages

Maybe you are looking for