BOBJ and DS Components and Versions
Hello All,
A few questions I was wondering if you could help me with:
What components make up BOBJ and Data Services? E.g. The components that make up BW are things like:
Software Component Release Level Highest Support Package Description
SAP_ABA 701 0006 SAPKA70106 Cross-Application Component
SAP_BASIS 701 0006 SAPKB70106 SAP Basis Component
PI_BASIS 701 0006 SAPK-70106INPIBASIS Basis Plug-In
SAP_BW 701 0006 SAPKW70106 SAP Business Warehouse
BI_CONT 704 0006 SAPK-70406INBICONT Business Intelligence Content
Also how do I find out what BOBJ version we are on, and what Web Application Server is being run?
Thanks for the assistance.
Nick.
Hi.
This looks like a known issue with samba patch 119757-xx (where xx>=28) described in the document Doc ID 1594221.1 on the Oracle Knowledge base.
One possible workaround:
Use environment variable LD_LIBRARY_PATH to set needed library path at first place to find the correct library.
LD_LIBRARY_PATH=/usr/lib/mps:$LD_LIBRARY_PATH
Regards,
Carole.
Similar Messages
-
HT1923 im trying to unistall itunes and its components and is not letting me/
im trying to unistall itunes and its components and is not letting me?
Do you get error messages when doing the uninstalls? If so, what do they say? (Precise text, please.)
-
After following the instructions to completly uninstall iTunes and related components, I restarted computerand reinstalled iTunes, Then I received the error message that iTunes couldn't load because program file Apple Application Support (deleted as per instructions) wasn't present. What now?
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Naming conventions/hierarchies for products and software components
Hi,
Can someone please advise what they have found works well for naming products and software components and recommended hierarchies?
Following the SAP model it seems to make sense to have a custom product for each SAP product when we are developing custom interfaces for the related system, e.g. ZPRODMYCOMPDEVS_R3, ZMYCOMPDEVS_CRM etc.
Beneath this level as similar convention could be used for the software component, e.g. ZSWCMYCOMPDEVS_CRM or if it is a modular SAP system like R/3 perhaps a grouping per key application area? (e.g. HR, Finance, Logistics etc)
I know it's not compulsory to start these with 'Z' but it would help group custom developments.
Any advice greatly appreciated.
AlanHi,
Please refer to this blog...
/people/michal.krawczyk2/blog/2005/04/09/xi--saps-document-templates
that is mentioned in the thread
Name space
Regards,
Bhanu -
Mixing Non JSF and JSF components
Hi All,
I wanted to mix non jsf and jsf components and I able to do this
<f:verbatim>
<input type="radio" name="selectBidder" value="#{currentRow['BID_ID]}"/>
</f:verbatim>But the problem is bean value is not getting binded.
The rendered output is containing same string i.e.
value="#{currentRow['BID_ID]}"
How to bind bean value to non jsf component.
And No Javascript please
Thanks
SudhakarBasically I am trying to implement something like below
<h:dataTable binding="#{consumer$Select_Provider.dataTable1}" headerClass="list-header" id="dataTable1"
rowClasses="list-row-even,list-row-odd" style="left: 48px; top: 48px; position: absolute"
value="#{consumer$Select_Provider.dataTable1Model}" var="currentRow">
<h:column binding="#{consumer$Select_Provider.column6}" id="column6">
<h:outputText binding="#{consumer$Select_Provider.outputText11}" id="outputText11" value="#{currentRow['USER_LNAME']} #{currentRow['USER_FNAME']}"/>
<f:facet name="header">
<h:outputText binding="#{consumer$Select_Provider.outputText12}" id="outputText12" value="Bidder"/>
</f:facet>
</h:column>
<h:column binding="#{consumer$Select_Provider.column1}" id="column1">
<h:outputText binding="#{consumer$Select_Provider.outputText1}" id="outputText1" value="#{currentRow['BID_PRICE']}"/>
<f:facet name="header">
<h:outputText binding="#{consumer$Select_Provider.outputText2}" id="outputText2" value="Bid Price"/>
</f:facet>
</h:column>
<h:column binding="#{consumer$Select_Provider.column3}" id="column3">
<f:verbatim>
<input name="selectBidder" type="radio" value="#{currentRow['BID_ID]}"/>
</f:verbatim>
<f:facet name="header">
<h:outputText binding="#{consumer$Select_Provider.outputText6}" id="outputText6" value="Select Bidder"/>
</f:facet>
</h:column>
</h:dataTable>Thanks
Sudhakar -
LV2010 and cFP-2120 and remote panel
I have a project in LV2010 for cFP-2220. When I convert the project for a cFP-2120, the remote panel doesn't work. When the browser goes to the IP address it defaults to 192.168.1.2/#Home.
The remote panels and browser control work fine for the 2220. I inserted the 2120 into the project in place of the 2220 and modified the fieldpoint paths in the vis. I upgraded the software on the 2120 using LV 2010. The original program was written for the 2120 in earlier versions of LV. It was updated to LV 2010 and adapted for the 2220 along with program feature updates related to pumps and other necessary system component changes. Maintenance and support of our customers units involves replacing pumps and other components and/or replacing their 2120's. We are trying not having to replace their 2120's.
When we deploy the program as a startup it runs controls and collects data, but the remote panel access with Internet Explorer isn't working. We have tried creating a new index.htm. -
Summary report to show all the software components and version installed
We are using 64bit Windows 2003 and Hyperion Planning and Essbase in 2 separate servers. I am not sure whether Windows can have a summary report to show all the software components and version installed and show it is 32bit or 64bit version installed?
Thanks!Refer steps here to delete SC file.:
http://support.apple.com/kb/TS2363
Then proceed to repair your QuickTime. START / CONTROL PANEL / ADD n REMOVE PROGRAMS / highlight QUICKTIME and click CHANGE then REPAIR. -
I am running Windows 7, ITUNES 10.6.3.25. I am unable to see my Iphone/sync my iphone in Itunes. I have uninstalled all components of Itunes and downloaded the newest version to no avail. Please help.....Thanks
I am attaching the Diagnostics data below:
Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
Dell Inc. Inspiron N7010
iTunes 10.6.3.25
QuickTime not available
FairPlay 1.14.43
Apple Application Support 2.1.9
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 5.2.0.6
Apple Mobile Device Driver 1.59.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.6.502
Gracenote MusicID 1.9.6.115
Gracenote Submit 1.9.6.143
Gracenote DSP 1.9.6.45
iTunes Serial Number 0016AA9C0126E318
Current user is not an administrator.
The current local date and time is 2012-07-05 11:42:18.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
Intel Corporation, Intel(R) HD Graphics
**** External Plug-ins Information ****
No external plug-ins installed.
**** Device Connectivity Tests ****
iPodService 10.6.3.25 (x64) is currently running.
iTunesHelper 10.6.3.25 is currently running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Most Recent Devices Not Currently Connected:
iPod (5th generation) running firmware version 1.3
Serial Number: 8L643QK9V9R
iPhone 4 (CDMA) running firmware version 5.1.1
Serial Number: C8RG57F0DDP8
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.I did all that HT1925 recommended and it was no help. My computer still won't recognize my iPhone. Often trying to start Apple Mobile Device Service fails with an error message that it starts and then stops immediately.
-
When installing CS3 Design Premium it instals Version Cue server and shared components, but I get the message "Errors: 6 component (s)" and dose not install, Photoshop, Flash, Illustrator, Indesign or Creative Suite Premium
Thank you Bturko in the future only migrate/copy/transfer your documents and settings. Adobe applications especially are not designed to be transferred from one computer to another. It is possible to recover however. I would recommend the following steps:
Run the uninstaller located in Applications/Utilities/Adobe Installers
Run the CC Cleaner Tool to ensure complete removal - Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
If you need to download a fresh copy of the installation files they can be downloaded at Download CS3 products.
Run the installer and reinstall Creative Suite 3. -
Version Control of APEX Pages and Shared Components
Background:
My organisation has a large customer base and over the last 2 years we have migrating from a forms to an apex user presentation layer. We have had a number of customers live on the apex front end for close to a year now.
Our current method of releasing apex objects is at the application level (ie applications are exported for version control in PVCS and then released to Test etc). We now want to investigate exporting pages and shared components individually. Hence, I have a few questions:
1. If I export a page and this is checked into PVCS and I forget to export a 'List of Values' shared component. What happens when the page in PVCS is created in another environment (ie Test). I guess the ‘Page Import’ would still succeed but the reference to the ‘List of Values’ would be some large made up number.
How would we detect the missing dependency after import ?
2. Regarding New or Changed Templates. Once again, if a page references a new template and is then exported, checked into PVCS and imported into test but the template is missed for migration to test, would the import succeed but the template reference would be broken, like in number 1.
3. How can Application level objects be locked (reserved) when undergoing modification.
Any comments would be appreciated especially if there are any sites using pages and shared component exports for version control and releases.
For anyone who's interested, the method we are thinking of using is:
..Page Export script will be version controlled
..ALL the shared component export scripts will be added to 1 main SQL script
Hence we only end up with 2 configurable objects in PVCS.Nigel,
1. If I export a page and this is checked into PVCS and I forget to export a 'List of Values' shared component. What happens when the page in PVCS is created in another environment (ie Test). I guess the ‘Page Import’ would still succeed but the reference to the ‘List of Values’ would be some large made up number.
For component export/import, the source and target worskpace ID and application ID must be identical. You can achieve the workspace "sameness" by exporting and importing the workspace from one database to another, thus preserving the workspace's numeric ID, aka security group ID. Similarly applications must be exported/imported/installed without changing their IDs in the installed-into instance. More fundamentally, the application you import/install components into must be an identical copy of the source application with respect to the internal object IDs, allowing only for differences that incent you to migrate changes from a higher rev level of the application into a copy that is at a lower rev level.
As to the specific question, if you copied a page but didn't copy an LOV into the target application then if the LOV referenced by the page already existed in the target application then page would simply reference the existing, perhaps down-level, LOV in the application. If the LOV did not already exist but had been newly created in the source application, then the target application page would contain an invalid reference and would produce a runtime error.
How would we detect the missing dependency after import ?
I don't know of any reports that would tell you this. There are several types of omissions that you need to watch out for, not all of which can be detected by inspection of the target application in isolation.
2. Regarding New or Changed Templates. Once again, if a page references a new template and is then exported, checked into PVCS and imported into test but the template is missed for migration to test, would the import succeed but the template reference would be broken, like in number 1.
Yes, same case.
3. How can Application level objects be locked (reserved) when undergoing modification.
There is no provision for this as there is for pages.
For anyone who's interested, the method we are thinking of using is:
..Page Export script will be version controlled
..ALL the shared component export scripts will be added to 1 main SQL script
Hence we only end up with 2 configurable objects in PVCS.
So you propose to have one script of all pages and another script for everything else? I'm not sure I got that right.
Scott -
after I download Itunes, when trying to sync Ipod, message says "needs newer version of mobile support, uninstall Itunes, and reinstall Itunes, and the same process starts all over again. why is that?
Try removing and then reinstalling the Apple software using these instructions.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
The above containes a link for XP. Also. make sure you install the correct Apple software, It comes in 32 and 64 bit and you need the one that is the same as the computer OS -
Installing Office 2013 Pro Plus RTM x64 on a fresh Windows 8 Pro WMC system.
Used Custom setup procedure to install only the desired software, i.e. unchecking most of the checkboxes.
After setup, a lot of undesirable software got nevertheless installed although it was specifically UNCHECKED at setup time, e.g. "Office Themes", "Microsoft SharePoint Foundation support", "Compare Diagnostics blahblah" + a bunch of outdated truetype
fonts.
No matter how many times we run again the "Change" setup from Windows' "Programs and Features" and uncheck these components, the setup routine does NOT uninstall them, with or without reboot etc. Basically, the Add/Remove function of the setup has NO EFFECT.
The setup also installs (offering no choice or notice to the users) a lot of undesirable bloatware e.g. some "Office Upload Center", "Spreadsheet Compare" etc. and several tasks (Office 2013 Sync-something stuff) & services & explorer hijacks (a greyed-out
"Skydrive Pro", what the...) AGAINST the user's will or consent.
These unwanted apps and hijacks seemingly cannot be uninstalled, not even kept from running and reenabling itself - except if killing the tasks using the Task Manager, then deleting (!) the files from their respective folders, in addition to editing the
registry to get rid of all this stuff. Of course the crap gets reinstalled/reenabled with any further launch of the office setup...
Reminds me a lot of bad practices by malicious software. :|
Office techs and engineers, PLEASE don't promise a customized setup option if it's for it to be snake oil... And don't offer a post-setup "Add/remove" or "Change" routine that has absolutely no effect whatsoever... And don't install unneeded/undesirable
useless features as tasks and hijacks that cannot be killed or get rid of...
Or at least please mention explicitely that you know better than users themselves, what they want and need and decide... :)
As a sidenote, the same issues were present with Office 2010 Pro Plus SP1 - Sharepoint stuff and office themes and all that jazz was already installed even when deliberately left unchecked, and could never be uninstalled afterwards.Hi,
First, I want to confirm with you that whether you install Office via MSI or Click to Run.
Only volume-licensed versions of Click-to-Run installations can be customized using the Click-to-Run Admin Tool. Retail versions of Click-to-Run, however, do not support the use of the Admin
Tool or provide any user interface based customizations to the product. These versions, for example, do not allow the user to choose what applications or features to not install or even the location of the installation files.
If you used MSI installation, then check to see the steps in the link below:
http://office.microsoft.com/en-us/excel-help/install-or-remove-individual-office-programs-and-components-HA010354261.aspx
Note: We can’t remove Office programs individually after the suite has been installed. You must uninstall Office completely, and then reinstall it using a custom installation.
Also, here’s a link about Office Customization Tool changes in Office 2010, the
Office Customization Tool is part of the Setup program and is the primary tool that administrators use to customize an Office 2010 client installation:
http://blogs.technet.com/b/office_resource_kit/archive/2010/01/05/office-customization-tool-changes-in-office-2010.aspx
Jaynet Zhang
TechNet Community Support
A new Office has arrived, try it now.
A beautiful Start. It begins here. Windows 8 and Windows RT.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Deleting and Adding components in a Sub contracting PO, for every line item
Hi,
I have requirement where in I need to change the Item category from Blank to 'L' for a given Line item, and for this Line Item I need to go to the Delivery Schedule lines and delete the existing Components and add new components to every Delivery Schedule line. This is going to be a LSMW object with a custom program.
I tried for recording ME22N, but couldn't do this as ME22N is not BDC friendly, and in ME22 the Item category field is Display only. I also tried with Function modules/BAPIs but nothing seems to be working out.
Can anybody help me get a solution to this requirement. Would appreciate a quick response as its a priority requirement for me.
Thanks in Advance,
Saleem.
Ph : +91-98456276311. You will definitely create two subcontracting info records for two raw materials say RAW1 and RAW2.
2. There will be two seperate production versions for these two materials.
3. Update respective production versions in respective subcontracting info-records.
4. This will help to upload the alternate BOM even you changed the material from PO
Amol -
Oledb and path length - Oracle client and networking components ...
Hello,
I've been suddenly getting the
"Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation."
error when trying to connect to an oracle 9.2 database using the msdaora oledb provider.
"..ora92/bin" is in my PATH environoment variable and the hints about setting read and execute permissions on the ..ora92/bin direction didn't work for me. However, what did do the trick, was reducing the length the PATH environement variable to under 182 characters.
Anybody else seen this that can explain what's gonig on here?
ErikHello Kamal,
Thanks for your reply
My system looks like this:
OS: MS Windows XP Professional Service Pack 2
msdaora version: 2.81.1117.0
This problem has only recently surfaced, but has now appeared on at least two other systems as well as my own. Any system changes must have happened on all three systems. I have "automatic updates" setup on my computer and they maybe setup on the other computers - could the be responsible for breaking oledb?
Other things I have tried:
The Oracle Oledb provider is also not working. It gives me the error:
"OraOLEDBpus.dll: the specified module could not be found"
When I reduce the size of the PATH variable it works too.
I am always able to run executables from the ../ora92/bin directory. So the path is only being wrongly interpreted by the Oledb providers.
Erik -
Business packages, Business Functions and Business Components
Dear All,
I am new to ESS/MSS.
We are going to implement the following applications. (Company is Indian based).
Version : EHP6 and Portal 7.3
1. Employee Search
2. Personal Information
2. Working Time
3. Benefits and Payments (Reimbursements, Salary Advance, URL iviews have to create for PF and ESI)
4.Travel Management (No 3rd party integration for booking tickets)
5. Performance Management Systems (360* Degree Appraisal)
6. E- Separation
7. Corporate Information
8. E- Recruitment
9. MSS
What are the Business Packages have to deploy?
What are the Business Functions have to deploy?
What are the Business Components have to deploy?
Regards
SomuWhat are the Business Packages have to deploy?
In portal side you need to deploy the below packages.
-> BP ERP05 ESS 1.41
-> BP ERP05 MSS 1.51
-> BP ERP05 COMMON PARTS 1.51
-> BPERPESSWDA1.50
-> BP MSS ADDON 1.0
-> BP Recruiter
-> BP Recruiter Administrator
If you want implement TMS applications then you required below BP's
-> BP ERP TMS 1.51
-> BP ERP05 TALENT DEV 1.01
And the components should be SP level compatibility with SAP ECC system
-> SAP ESS
-> SAP MSS
-> SAP PCUI_GP
What are the Business Functions have to deploy?
You need to activate the below BF's in ECC HR system
HCM_ESS_CI_1
HCM_ESS_WDA_1
HCM_ESS_WDA_2
HCM_MSS_WDA_1
HCM_MSS_WDA_2
FIN_TRAVEL_1
FIN_TRAVEL_2
FIN_TRAVEL_3
HCM_ASR_CI_1
HCM_ASR_CI_2
HCM_ASR_CI_3
HCM_ECM_CI_1
HCM_ECM_CI_2
HCM_LSO_CI_1
HCM_LSO_CI_2
HCM_LSO_CI_3
HCM_OSA_CI_1
HCM_OSA_CI_2
HCM_PD_UI_1
HCM_TMC_CI_1
HCM_TMC_CI_2
CA_HAP_CI_1
HCM_OSA_CI_1
HCM_OSA_CI_2
HCM_TMC_CI_1
HCM_TMC_CI_2
HCM_HCP_CI_1
HCM_ECM_CI_2
HCM_ERC_CI_4
HCM_PD_UI_1
FIN_CO_MSSBUA_NWBC
FIN_REP_SIMPL_1
ERP_ENTERPRISESEARCH
What are the Business Components have to deploy?
In ECC side import the addon components based on your system component levels.
MSS Addon 1.0
ERECRUTIMENT
Maybe you are looking for
-
How to customize standard text in operation tab of PM order
Hi everybody, I am Rajat. I have question in SAP PM: In operation tab of PM order we have standard text, rt now i m using fresh system...kindly let me know how to enter values in that so that when i take drop down i'll see those values. Kindly reply
-
No User accounts after Archive and Install ?
Today I tried to salvage a 20" iMac G5 for a friend. He had done something that screwed up his hard drive. Disk Utility Disk Repair run of the startup partition always failed. Using an external FW disk, I was able to use Disk Utility Repair successfu
-
How to Generate a Custom Message for A Custom Code.
Hello, Can anyone guide me on this - Application : 11.5.10.2 We have a cutom Trigger through which we want to display a custom message. We have re-generated the .msb, but it seems that something is missing. Following are the Steps We have followed to
-
Maintain special char in standard text
Hi Guru, I try to add special character such as &, '' etc in standard text thru web UI. But Somehow system cannot identify the special char. Does anyone come across this before?
-
That serial number is invalid even serial number is genuine
That serial number is invalid even serial number is genuine