Body background image not displaying in IE6

I've looked at lots of questions about background image problems in IE6 but didn't see an answer to this one. I have a horizontal stripe on the page that's made of a background image in the <body> tag. The home page has a different size stripe than the subpages, so on the subpages I'm using a class style to call the background image.
The home page body style looks like this:
body {
    margin: 0;
    padding:0;
    text-align: center;
    background-image:url(../images/background_banner.jpg);
    background-repeat:repeat-x;
    height: 100%;
And the subpages use this class style:
.subpage {
    margin: 0;
    padding:0;
    text-align: center;
    background-image:url(../images/background_banner_sub.jpg);
    background-repeat:repeat-x;
    height: 100%;
It works in all browsers except IE6, which loads the background image on the home page but not the subpages. So I suspect it's the class style it doesn't like. Is there an IE6 fix that will get it to work correctly?
Here's the url of a subpage.
Thanks,
R-Co

Well, both fixes still don't seem to work in IE6. And for some reason, the embedded style in the home page doesn't work at all. Here's the CSS for the method using different class styles for home and subpages:
body {
    margin: 0;
    padding:0;
    text-align: center;
.bodyhome {
    background-image:url(../images/background_banner.jpg);
    background-repeat:repeat-x;
    height: 100%;
.subpage {
    background-image:url(../images/background_banner_sub.jpg);
    background-repeat:repeat-x;
    height: 100%;
Here's a screen shot from Browser Lab showing what it looks like in IE6.
Any ideas?
Thanks again,
R-Co

Similar Messages

DIV Background image not displaying in FF

Hi!
I'm building a floated 3 column DIV layout with a wrapper to center the DIVs. I put a background image in the wrapper to give the appearance of the columns stretching to the bottom of the layout. It displays in IE, but not in FF.
If I give the wrapper a height, the background image shows, but I want the layout to expand as I enter content. My code is below.
I must be missing something. Any tips?
CSS:
#left {
float: left;
width: 200px;
#middle{
float: left;
width: 200px;
#right {
float: left;
width: 200px;
#footer {
background-color: #316262;
float: left;
width: 600px;
clear: both;
#wrapper {
width: 600px;
margin-right: auto;
margin-left: auto;
background-image: url(images/bkg_css_layout.gif);
BODY CODE:
<div id="wrapper">
    <div id="left">Content for "left" Goes Here</div>
    <div id="middle"> Content for"middle" Goes Here </div>
    <div id="right">Content for"right" Goes Here </div>
    <div id="footer">Content for "footer" Goes Here</div>
</div>

Turns out that I couldn't have a float on my footer with clear:both!
FIXED! YEA!

Background image not displaying

I'm developing pages that will each have a different background image. i've defined a div with the bg image in it and put that div in the code, but the bg image doesn't show up. i've also tried adding a bg color to the div and that doesn't show up either, so i'm sure it's not a path or file name issue. css & code below.
@import url("./whitespace-reset.css");
@charset "UTF-8";
body {
    margin: 0; /* it's good practice to zero the margin and padding of the body element to account for differing browser defaults */
    padding: 0;
    text-align: center; /* this centers the container in IE 5* browsers. The text is then set to the left aligned default in the #container selector */
    color: #000000;
    font-family: Verdana, Arial, Helvetica, sans-serif;
#container {
    width: 761px; /* the auto margins (in conjunction with a width) center the page */
    border: 0;
    text-align: left; /* this overrides the text-align: center on the body element. */
    height: 871px;
    margin: 0;
    padding: 0;
    background: #FFFFFF;
#header {
    height: 148px;
    width: 761px;
    padding: 0px 0px 0px 0px;
    margin: 0px 0px 0px 0px;
#leftside {
    width: 158px;
    float: left;
    margin-top: -38px;
    padding: 0px 0px 0px 0px;
#leftside .menu img {
    display: block;
    margin: 0;
#leftside ul.menu {
    padding: 0px 0px 0px 0px;
    font-style: none;
    margin: 0;
#leftside ul.menu li {
    display: inline;
    float: left;
    margin: 0;
    padding: 0;
    list-style: none;
#leftspacer {
    width: 31px;
    float: left;
    height: 723px;
    margin-top: -38px;
    padding-right: 10px;
    background-image: url(images/home_spacer_left.jpg);
    background-repeat: no-repeat;
#top {
    margin-top: 0px;
    height: 38px;
    padding: 0px 0px 0px 0px;
#top ul.menu {
    margin-top: 0px;
    margin-left: 189px;
    float: left;
    padding: 0px 0px 0px 0px;
    margin-right: 0px;
    margin-bottom: 0px;
    list-style: none;
#top ul.menu li {
    display: inline;
    list-style: none;
    float: left;
    margin: 0;
    padding: 0;
#bottom {
    height: 22px;
    left: 468px;
#bottom ul.menu {
    margin-top: 300px;
    margin-right: -23px;
    float: left;
    margin-left: -61px;
    list-style: none;
#bottom ul.menu li {
    display: inline;
    list-style: none;
    float: left;
#mainContent {
    margin: 0px 0px; /* the right and left margins on this div element creates the two outer columns on the sides of the page. No matter how much content the sidebar divs contain, the column space will remain. You can remove this margin if you want the #mainContent div's text to fill the sidebar spaces when the content in each sidebar ends. */
    padding: 0 0 0 0;
#facilitiesContent {
    background: #990000 url(images/facilities_bg.jpg) repeat;
    padding: 0;
    height: 208px;
    margin: 0;
    width: 573px;
#footer {
    padding: 0; /* this padding matches the left alignment of the elements in the divs that appear above it. */
    background:#c0b7b2;
    height: 22px;
#threepix {
    margin-left: 189px;
    margin-right: 0px;
    height: 114px;
#col1 {
    position: relative;
#col1-a {
    position: absolute;
    width: 275px;
    right: 0px;
    top: 0px;
#col1-b {
    position: absolute;
    right: 0px;
    width: 275px;
    top: 0px;
#pixcopyleft {
    margin-left: 189px;
    font-size: 1em;
    font-family: Arial, Helvetica, sans-serif;
    margin-top: 10px;
#pixcopyright {
    font-size: 1em;
    margin-left: 189px;
    font-family: Arial, Helvetica, sans-serif;
    margin-top: 10px;
#footer ul.menu {
    margin-left: 189px;
    margin-right: 0px;
    margin-top: -22px;
    padding: 0px 0px 0px 0px;
    float: left;
#footer ul.menu li {
    display: inline;
    list-style: none;
    padding: 0px 0px 0px 0px;
    float: left;
#footer p {
    margin: 0; /* padding on this element will create space, just as the the margin would have, without the margin collapse issue */
    padding: 10 0;
img.imageleft {
    float: left;
    margin-left: 0px;
    padding: 5px 5px 5px 5px;
img.imageright {
    float: right;
    padding: 5px 0px 5px 5px;
    text-align: right;
.imagecenter {
    text-align: center;
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
    float: right;
    margin-left: 0px;
    padding: 5px 5px 5px 5px;
.fltlft { /* this class can be used to float an element left in your page */
    float: left;
    margin-right: 8px;
.clearfloat { /* this class should be placed on a div or break element and should be the final element before the close of a container that should fully contain a float */
    clear:both;
    height:0px;
    font-size: 1px;
    line-height: 0px;
h1 {
    font-family: Arial, Helvetica, sans-serif;
    font-size: 1em;
    font-weight: bold;
    margin-bottom: 3px;
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Core PIlates Studio </title>
<link href="core.css" rel="stylesheet" type="text/css" />
<body bgcolor="#c0b7b2" onload="MM_preloadImages('images/nav_main_ourteam_roll.jpg')">

<script type="text/javascript">

</script>
<meta name="description" content="Core Pilates Studio is a classical, fully equipped pilates and Gyrotonic studio convenienly located near Vassar College in Poughkepsie, NY. We offer classical pilates, Gyrotonic and Gyrokinesis in private, semi-private and group sessions." />
<meta name="keywords" content="core pilates studio, pilates, core, gyrotonic, gryokinesis, joeseph pilates, pilates in poughkeepsie, pilates in ny, pilates in new york" />
</head>
<body onload="MM_preloadImages('images/nav_main_home_roll.jpg','images/nav_main_programs_roll.j pg','images/nav_main_schedule_roll.jpg','images/nav_main_rates_roll.jpg','images/nav_main_ ourteam_roll.jpg','images/nav_main_contactus_roll.jpg')">
<div id="container">
   <div id="header">
    <img src="images/home_header.jpg" align="left" /><a href="index.html"><img src="images/home_logo_core.jpg"></a>
</div>
<div id ="top">
<ul class="menu">
      <li><a href="facilities.html"><img src="images/subnav_studio_facilities_down.jpg" class="menu"></a></li>
       <li><a href="rates.html"><img src="images/subnav_studio_rates_up.jpg" class="menu"></a></li>
       <li><a href="hours.html"><img src="images/subnav_studio_hours_up.jpg" class="menu"></a></li>
       <li><a href="policies.html"><img src="images/subnav_studio_polocies_up.jpg" class="menu"></a></li>
       <li><a href="directions.html"><img src="images/subnav_studio_directions_up.jpg" class="menu"></a></li>
       <li><a href="contact-us.html"><img src="images/subnav_studio_contactus_up.jpg" class="menu"></a></li>
       <li><img src="images/subnav_studio_back.jpg" class="menu"></li>
</ul>
</div>
<div id="leftside">
<ul class="menu">
      <li><a href="index.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('home','','images/nav_main_home_roll.jpg',1)"><img src="images/nav_main_home_up.jpg" name="home" width="158" height="39" border="0" id="home" /></a></li>
      <li><a href="programs.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('programs','','images/nav_main_programs_roll.jpg',1)"><img src="images/nav_main_programs_up.jpg" name="programs" width="158" height="39" border="0" id="programs" /></a></li>
      <li><a href="the-studio.html"><img src="images/nav_main_thestudio_down.jpg"></a></li>
      <li><a href="schedule.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('schedule','','images/nav_main_schedule_roll.jpg',1)"><img src="images/nav_main_schedule_up.jpg" name="schedule" width="158" height="39" border="0" id="schedule" /></a></li>
      <li><a href="rates.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('rates','','images/nav_main_rates_roll.jpg',1)"><img src="images/nav_main_rates_up.jpg" name="rates" width="158" height="39" border="0" id="rates" /></a></li>
      <li><a href="contact-us.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('contact us','','images/nav_main_contactus_roll.jpg',1)"><img src="images/nav_main_contactus_up.jpg" name="contact us" width="158" height="39" border="0" id="contact us" /></a><a href="our-team.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('our team','','images/nav_main_ourteam_roll.jpg',1)"><img src="images/nav_main_ourteam_up.jpg" name="our team" width="158" height="39" border="0" id="our team" /></a></li>
      <li><img src="images/nav_main_space_below.jpg" /></li>
      <li><a href="mailto:[email protected]"><img src="images/home_email.jpg" /></a></li>
      <li><img src="images/home_address.jpg" /></li>
      <li><a href="special-programs.html"><img src="images/home_logo_special.jpg" /></a></li>
   </ul>
</div>
<div id="leftspacer"></div>
<div id="facilitesContent">
<div id="pixcopyright"><img src="images/images/facilaties_page_images_03.jpg" class="imageright">
      <h1 align="right">What is Pilates?</h1>
      <div align="right">Whether you're a world class athlete, a couch potato, recovering from an injury, new to excercising, old, young or in between you can benefit from Pilates.</div></div><br /><br />
    <div id="pixcopyright"><img src="images/images/facilaties_page_images_03.jpg" class="imageright">
    <h1 align="right">What is Pilates?</h1>
       <div align="right">Whether you're a world class athlete, a couch potato, recovering from an injury, new to excercising, old, young or in between you can benefit from Pilates.</div></div><br /><br />
</div>
<br class="clearfloat" />
<div id="footer">
   <ul class="menu">
       <li><img src="images/nav_bottom_left_space.jpg"></a></li>
       <li><a href="index.html"> <img src="images/nav_bottom_home.jpg"></a></li>
       <li><a href="programs.html"> <img src="images/nav_bottom_program.jpg"></a></li>
       <li><a href="the-studio.html"> <img src="images/nav_bottom_thestudio.jpg"></a></li>
       <li><a href="schedule.html"> <img src="images/nav_bottom_schedule.jpg"></a></li>
       <li><a href="rates.html"> <img src="images/nav_bottom_rates.jpg"></a></li>
       <li><a href="our-team.htm"> <img src="images/nav_bottom_ourteam.jpg"></a></li>
       <li><a href="contact-us.html"> <img src="images/nav_bottom_contactus.jpg"></a></li>
   </ul>
</div>
</div>
</body>
</html>

Start by fixing the code errors.
http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.elixir.biz%2Fcore%2Ffacilitie s.html
http://jigsaw.w3.org/css-validator/validator?profile=css21&warning=0&uri=http%3A%2F%2Fwww. elixir.biz%2Fcore%2Ffacilities.html
Your document type doesn't match your HTML closing tags. Modify > Page properties > Encoding > choose either HTML or XHTML (transitional) and hit Apply.
Images require an alt attribute for better web accessibility. If you want to skip this for now and add them later, that's OK.
but your code won't validate until you add them to each image.
When you've fixed the code errors, repbulish the page and see if that fixes the problem.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb
http://alt-web.blogspot.com

SSRS Report - background image not displaying in MHTML email

We have a report that has a rectangle with an image as a background (doesn't make any difference whether image is external, embedded, etc). The background image displays fine on the screen and when exporting to PDF, but doesn't show when emailing (via subscription)
in MHTML format and opening in MS Outlook, gmail, etc.
It seems to be a legitimate bug with SSRS (have tried in SSRS 2008 R2, 2012, 2014).
Is there a workaround? Service Pack?

Hi Corey Gray,
Per my understanding that the background image in the email subscription not display which format is MHTML, right?
I have tested on my local environment and can reproduce the issue. I deliver this report to three email amounts: Outlook, Hotmail and 163, below I will share the test results with you.
Outlook: the backgroudimage disappear in the email body and there is no one attachment being sent in the email.
Hotmail: the backgroudimage disappear in the email body, however, the backgroundimage being sent as one attachment in the email.
163: the backgroudimage displays in the email body and the backgroundimage being sent as one attachment in the email.
Based on previous test results, we can conclude that: these different scenarios caused by the settings of the email rather than Reporting Services.
If you are using Outlook, I would recommend you submit one thread in this Outlook forum,
http://social.technet.microsoft.com/Forums/en-us/outlook/threads.
In this forum, you can get more professional support about how to set the Outlook.
If you have any other question, please feel free to let me know.
Regards
Vicky Liu

Background image not repeating in IE6

I have a background image in a cell of a 1x1 table -
http://savanabar-leros.com/art7tables.shtml
the image is set to repeat x and y.
In FF2 and IE7 it displays as expected.
In IE6 the background image is not repeated
For the moment I've increased the size of the image to
compensate - but
obviously I would like to know what I have done wrong. It's a
very temporary
fix anyway as increasing the text in IE6 shows the text
dropping out the
bottom of the background image.
Jo

I was trying to find this the other day - something to do
with /75 being the
percentage of transparency I think.
Frankly I would love to use an "easy way out" - I have tried
and failed
despite having been given some excellent help - how oh how
please do I do
this?
Jo
"Murray *ACE*" <[email protected]> wrote
in message
news:[email protected]...
> What you see there *is* using the htc files. If I would
remove them, the
> transparency disappears, but the background image tiles.
Why don't you
> take the easy way out, and make the background image
have a reduces
> opacity and contain the underlying image bits as well?
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "josie1one" <joleros[nospam]@yahoo.com> wrote in
message
> news:[email protected]...
>> But... it I remove the htc file it is not
transparent - and yet yours is.
>> I got in a mess with the transparency and there are
two versions... with
>> the htc file and the ie2.css fix. Removing one of
them seemed to prevent
>> transparency.
>> Did you *only* remove the htc file and nothing else?
If so, I don't know
>> what to do <whimper>
>>
>> --
>> Jo
>>
>>
>> "Murray *ACE*"
<[email protected]> wrote in message
>> news:[email protected]...
>>>
http://www.murraytestsite.com/savana.html
>>>
>>> You can see that indeed the png image is not
tiling to fill the table.
>>> If I remove the htc files from the CSS, it does
do so. I conclude that
>>> there must be something in the htc file code
that is causing this to
>>> happen....
>>>
>>> --
>>> Murray --- ICQ 71997575
>>> Adobe Community Expert
>>> (If you *MUST* email me, don't LAUGH when you do
so!)
>>> ==================
>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>> ==================
>>>
>>>
>>> "josie1one" <joleros[nospam]@yahoo.com>
wrote in message
>>> news:[email protected]...
>>>>
http://savanabar-leros.com/images/screen.jpg
>>>> Thanks for looking.
>>>>
>>>> --
>>>> Jo
>>>>
>>>>
>>>> "Murray *ACE*"
<[email protected]> wrote in message
>>>> news:[email protected]...
>>>>> Post a screenshot of what you are
seeing, please Jo....
>>>>>
>>>>> --
>>>>> Murray --- ICQ 71997575
>>>>> Adobe Community Expert
>>>>> (If you *MUST* email me, don't LAUGH
when you do so!)
>>>>> ==================
>>>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>>>>> ==================
>>>>>
>>>>>
>>>>> "josie1one"
<joleros[nospam]@yahoo.com> wrote in message
>>>>>
news:[email protected]...
>>>>>> I've cleared my cache but still
seeing non-repeating background on
>>>>>> both computers in IE6. Must be me -
thanks Murray.
>>>>>>
>>>>>> --
>>>>>> Jo
>>>>>>
>>>>>>
>>>>>> "Murray *ACE*"
<[email protected]> wrote in message
>>>>>>
news:[email protected]...
>>>>>>> You're talking about the
translucent reddish rectangle? Looks fine
>>>>>>> to me in IE6.
>>>>>>>
>>>>>>> --
>>>>>>> Murray --- ICQ 71997575
>>>>>>> Adobe Community Expert
>>>>>>> (If you *MUST* email me, don't
LAUGH when you do so!)
>>>>>>> ==================
>>>>>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>>>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>>>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>>>>>
http://www.macromedia.com/support/search/
- Macromedia (MM)
>>>>>>> Technotes
>>>>>>> ==================
>>>>>>>
>>>>>>>
>>>>>>> "josie1one"
<joleros[nospam]@yahoo.com> wrote in message
>>>>>>>
news:[email protected]...
>>>>>>>> Really? I've now reduced the
size of the image if you wouldn't
>>>>>>>> mind testing. Displays
perfect in FF2 even with Ctrl+ but not on
>>>>>>>> two computers in IE6. In
fact it seems to cycle through several
>>>>>>>> backgrounds before
displaying a narrow background.
>>>>>>>>
>>>>>>>> --
>>>>>>>> Jo
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> "Murray *ACE*"
<[email protected]> wrote in message
>>>>>>>>
news:[email protected]...
>>>>>>>>> It's repeating for me in
IE6, Jo.
>>>>>>>>>
>>>>>>>>> --
>>>>>>>>> Murray --- ICQ 71997575
>>>>>>>>> Adobe Community Expert
>>>>>>>>> (If you *MUST* email me,
don't LAUGH when you do so!)
>>>>>>>>> ==================
>>>>>>>>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>>>>>>>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>>>>>>>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>>>>>>>>
http://www.macromedia.com/support/search/
- Macromedia (MM)
>>>>>>>>> Technotes
>>>>>>>>> ==================
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> "josie1one"
<joleros[nospam]@yahoo.com> wrote in message
>>>>>>>>>
news:[email protected]...
>>>>>>>>>>I have a background
image in a cell of a 1x1 table -
>>>>>>>>>>
http://savanabar-leros.com/art7tables.shtml
>>>>>>>>>> the image is set to
repeat x and y.
>>>>>>>>>>
>>>>>>>>>> In FF2 and IE7 it
displays as expected.
>>>>>>>>>>
>>>>>>>>>> In IE6 the
background image is not repeated
>>>>>>>>>>
>>>>>>>>>> For the moment I've
increased the size of the image to
>>>>>>>>>> compensate - but
obviously I would like to know what I have done
>>>>>>>>>> wrong. It's a very
temporary fix anyway as increasing the text in
>>>>>>>>>> IE6 shows the text
dropping out the bottom of the background
>>>>>>>>>> image.
>>>>>>>>>>
>>>>>>>>>> --
>>>>>>>>>> Jo
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>

Background image not displaying properly

My site is not displaying correctly on mobiles and ipads. I want my background image to span the width of most widescreen monitors but it's not displaying correctly. I am sure I am doing something wrong. Also have some problems with the map not spanning the width on some devices. Any help greatly appreciated.
Website: cdic.us
Thanks in advanced.

Does it help if you change this:
html, body {
    margin: 0;
    padding: 0;
    background-color: #F0F0E3;
    background-repeat: no-repeat;
to this:
html, body {
    margin: 0;
    padding: 0;
    background-color: #F0F0E3;
    background-repeat: repeat-y;
Martin

Background image not displaying 100% width of iphone

Hi I am getting some strange behaviour on my iphone using firefox but displaying perfectly in firefox on computer. I do not wish to submit the name of site as I do not want it to show up in search results but if anyone can help me I will pm site address. Thanks.
As the header's width is 100%, why is there the need for margin: 0 auto or text-align:center? Surely the background image should just display to 100% of the screen? Then the actual logo image that sits in the header div should have text align and margin auto yes? I know that applying these rules this way does not center the logo within the div but WHY? I have uncommented out the text align and margin auto on the header div and it displays properly on my computer but not on the iphone.
With regards to iphone the background image stops short of the logo by a small amount, I have not designed a separate style sheet for iphones, not part of the scope but as the rest of the pages display ok why does the background image stop just short of the logo image?
I really appreciate your input.
This is the CSS
#header {
   width:100%;
height:117px;
    padding: 0 0 0 0;
/*    text-align:center;
    margin:0 auto;*/
    background:url(images/header-bg2.jpg) left repeat-x;}
#header a img {
    border:none;
    padding:0;
    margin:0 auto;
    text-align:center;}
<div id="header">
<a href="http://www.xxxxxxxxxxxxxxx.com.au"><img src="images/KPS-logo.png" width="1024" height="117" alt="xxxxxxxxxxx Logo" /></a>
</div> 

You have nothing defining your background image size, just the box that holds it
try adding some CSS to control the actual background image...
background-size:cover;
background-position:right top;
background-repeat:no-repeat;
background-atachment:fixed;

Background image not display in applet?

Hi all,
I try to display a image to applet as demos of oracle forms (reusable_calendar) but it can not.
I add this text (AliasMatch ^/forms90/images/(..*) "C:\Ora92DS/forms90/Images/$1") into forms90.conf where C:\Ora92DS/forms90/Images/ contents my background image.
Then I modify background=backgrnd.gif the formsweb.cfg file but the applet also do not display the background image.
I also check the registry.dat file with
default.icons.iconpath=
default.icons.iconextension=gif
I am need your helps.
Thanks

Hi,
add /forms90/images/ as the default.icons.iconpath= value
Frank

How do I keep the body background-image centered?

I have a body background-image that does not fill up the
entire window on the tops and bottoms of most monitors (it
strectches to the left and right just fine) and so I would like to
have it centered vertically with equal amounts of the
background-color #ECE5C8.
I assumed using background-position: 50% 50% would do the
trick and it does until switching to full screen mode and all the
content jumps upwards and messes up the whole site layout (IE
only-in friefox, the background-image still doesn't center) so
instead I have the background-position set to: 50% 0%.
Thanks a million to anyone who can help me get it centered, I
know there has to be an easy fix but I sure can't figure it out!
The site can be found here:
http://www.lightspacewebdesign.com/sacredsolas

There would be only two ways to make this layout 'work'.
1. Just make everything on that page a graphic. Then there is
no
possibility that resizing the text in the browser will blow
the layout.
This is a very bad idea for obvious reasons.
2. Have the text containing 'graphical box' built in pieces
so that as the
text expands, it can cause the box to expand as well. The
easiest way to do
this is with a top a middle and a bottom image of the box,
using each as the
background image of three stacked containers. Place the text
in the middle
container and as it expands, it will tile the middle
background image
vertically to give the impression of the box expanding. This
approach
doesn't lend itself to your background image, since there is
no way to tile
the background image to fill the newly created space.
Beyond that, I think you are a dead duck. The problem is not
that this is
what you were given to work with - it's that you didn't
understand how
unusable the design was when you accepted it. I think your
best option now
is to go back to the designer and explain to them how this
lovely layout
only works well in print, and not on the web. Show them how
it fails.
Solicit suggestions from them for how to make it work in a
medium where
there is no way to control the size of the text.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"afriendofcheese" <[email protected]> wrote
in message
news:[email protected]...
> By "a rigid layout scheme that cannot allow flexibility"
I assume you mean
> that
> everything shouldn't be bound inside the position of the
background-image,
> but
> this is what the designer and client gave me to work
with.and so I have to
> make
> due.
>
> With that in mind, I hope someone out there can help me
out with this!
>

OBIEE 10G Embedded Image not displayed on PDF

Hi
We have some embedded images (source on network share or on the webserver) on a dashboard. On the screen the images are displayed without problems.
But if we want to print the dashboard (f.e. PDF) the images are not printed. In html-view the images would be displayed.
Is there a known bug that images can't be printed on dashboard pages or do we have to embed them different?
Thank you

Hi Team,
I do face the same issue of image not displayed in only pdf output format. Our client has deployed OBIEE 10.1.3.4.1 using Weblogic application server and is accesible through a secured url access.
I have followed the fmap syntax to locate the image, also made sure the image is getting accessed through url, tried with different images of different sizes . In all cases the image display is appearing fine in HTML & Excel output. But not getting displayed only for pdf output.
Can you please help me with this regard if am missing any specific setup for pdf output. Is there is any pointers or documentation available to get around this issue.
Thanks in advance.

OBIEE 11G Embedded Image not displayed on PDF

Hi
I have some embedded images on a dashboard. On the screen the images are displayed without problems.
But if we want to print the dashboard (f.e. PDF) the images are not printed. In html-view the images would be displayed.
All the images are referenced with the fmap path.
Any way to print the images in the pdf ?
Thank you
obiee 11.1.1.5
O.S : Oracle Linux 5.6 x64

Hi Team,
I do face the same issue of image not displayed in only pdf output format. Our client has deployed OBIEE 10.1.3.4.1 using Weblogic application server and is accesible through a secured url access.
I have followed the fmap syntax to locate the image, also made sure the image is getting accessed through url, tried with different images of different sizes . In all cases the image display is appearing fine in HTML & Excel output. But not getting displayed only for pdf output.
Can you please help me with this regard if am missing any specific setup for pdf output. Is there is any pointers or documentation available to get around this issue.
Thanks in advance.

JPG images not displayed correctly in Bridge and Photoshop (Mac OS)

(Note: I have copied the content of this query from the Creative Suites forum where I originally opened it.)
I am using CS4 under OSX 10.4.11 on a PowerMac G5 Quad with 23" Apple cinema display. Images which have been captured as JPG are displayed fine by Preview, but when opened in Bridge, Camera Raw or Photoshop. the colours are all "washed out". The attached screen capture should give an idea of the difference, with the upper being Camera Raw (image settings) and the lower being Preview. My monitor has been calibrated and I'm using sRGB IEC61966-2.1 colour space in Camera Raw and Photoshop. The colours displayed by Preview are pretty close to "real life". I find it virtually impossible to adjust the colours in Photoshop to get back to anything similar.
After opening the image in Photoshop without adjustment, and Save As JPEG with embedded color profile, Preview displays the new image the same as Photoshop. Save As JPEG without embedded color profile, and Preview displays this copy just like the original. It seems that Photoshop is making different (incorrect) assumptions about what color space to use when there is no embedded color profile. Shouldn't it assume sRGB like virtually everything else (http://en.wikipedia.org/wiki/SRGB)? Or is its interpretation of sRGB incorrect? How can I fix this?
Re: JPG images not displayed correctly in Bridge and Photoshop

xxxxyyyyz wrote:
…If there is someone out there who has experience of obtaining decent colour management in CS4 on a Power PC, I would really like to know how you achieved it.
That would be yours truly, and I hasten to reply because I may have some insights that can help you too.
Just get it it out of the way, here's my setup:
Photoshop 11.0.2 ("CS4"); VersionCue disabled and uninstalled.—2.5 GHz Power Mac (PPC) G5-Quad; 16GB RAM; mutant, flashed 550MHz nVidia GeForce 7800GTX 1,700MHz 512MB VRAM; ATTO ExpressPCI UL5D LP SCSI card; Mac OS X Tiger 10.4.11 and Leopard 10.5.8 boot drives; Spotblight, Dashboard and Time Machine permanently disabled; dual 22" CRT monitors; USB wireless 'n' available but connected to the Internet via wired Ethernet; 1 FW flatbed scanner; 2 SCSI scanners (one tabloid-size transparency scanner and a film scanner); various internal & external HDs; FW Epson 2200 and Ethernet Samsung ML-2850ND printers; 2 X Back-UPS RS 1500 XS units.
I can unambiguously and in good faith represent to you that my color management, from capture to print, is as spot-on as anyone with any kind of setup can hope to achieve. Unequivocally and without qualifications.
Now, first things first: Forget about trying to synchronize color management across the point applications lumped together only by Adobe marketing fiat into a variety of meaningless "creative suites". Concentrate on Photoshop. Do not try to use Bridge to synchronize anything.
The "suites" are a totally artificial construct created by Adobe bean counters and marketing types. The point applications (i.e. the individual programs clumsily bundled together, e.g. Photoshop, Illustrator, InDesign, etc.) are developed independently by separate engineering teams that are not only not in the same building, but in different cities, different states of the American Union, and even in different countries. They have very little communication among them, if any, as evidenced by repeated posts in these forums by Photoshop engineering staff urging us, the end users, to let the other teams know in their own forums that a given problem exists and is actually affecting our work.
Enough said about the cause of the problem. The end result is that Color Management is at very, very different levels of progress and sophistication in each individual point application, with only Photoshop fully entitled to be considered state of the art.
Secondly, a disclaimer: I have been hanging on to my CRT monitors and take care of them as Jascha Heifetz used to take care of his Stradivarius. I don't know what I will do if I manage to outlive the usefulness and accuracy of my CRTs (unlikely at this point). I have despaired in futile efforts to bring the luminosity of any LCD monitor down to where I would feel comfortable calibrating and profiling it. I believe my monitors are the foundation of my color management efforts.
Especially if you have one of the extreme wide-gamut LCD or LED monitors, you'll face an uphill battle.
Be careful to avoid any version 4 icc profiles, whether canned or generated by your calibration software. Stick to version2 icc profiles. Ask the manufacturer of your calibration software/hardware if in doubt.
Here are some not-too-recent, but thoroughly representative screen shots of the calibration results I obtain with my monitors, which I calibrate and profile often and regularly (I validate the calibration at least several times per month).
In a nutshell, my color management practices and settings mirror those described by Bruce Fraser, Jeff Schewe, Andrew Rodney and Gary Ballard's site. I have learned from all of them.
My working color space is ProPhoto RGB. I choose to work with PSD and PSB files. As a long-time, rabid JPEG hater, I only rarely deal with JPEGs, using them sporadically to illustrate a point in this forum or elsewhere in the web. My main output consists of prints.
I only deal with tagged image files (files with an embedded color profile) and often recommend beating up with a baseball bat any moron that hands you an untagged file—figuratively of course, but I find the expression gets my point across unambiguously.
Following is a screen shot of some of my pertinent settings:
Note that I have never bought into the "suite" concept myself. I do have and routinely use Adobe Illustrator 10.x, InDesign 2.x and Acrobat Professional 8.x, but they are all older, independent versions of each point application, licensed at different times.
Be further advised, that the answer to many problems offered by Adobe engineers often is not to install VersionCue, or uninstall it, or at least disable it.
Also, as outlined at the beginning of this post, concentrate on Photoshop, not on synchronizing applications that can't really communicate with each other, despite the claims of Adobe marketing hacks to the contrary.
One big caveat, do not fall into this trap:
xxxxyyyyz wrote:
…I believe my problem has nothing to do with my monitor profile, for several reasons, but…
…It seems extremely unlikely to me that…
You either want to learn, or you don't. You either want to solve your problems, or you don't.
When you start arguing instead of studying, questioning advice instead of following it and detecting where you went wrong, you're on the right track to nowhere. That attitude will get you there fast. Remember you are the one with the problem, and only you can acquire the discipline to learn how to solve it.
Go ahead and ask me anything that is not clear, just don't argue with me please, and don't tell me why you think Fraser, Rodney, Ballard and I are wrong. You see, I am not experiencing any problem that needs fixing. I have an interest in helping you, but not in hearing about your speculations, theories or conclusions.
Good luck.
Wo Tai Lao Le
我太老了

CF slows down to a halt ... images not displaying

My primary laptop on which I do all coding ...
- less than 1 year old
- Dell (cough) XPS M1730
- Windows XP (latest)
- ColdFusion Ver 8, developer edition.
- No other issues with laptop
Also running
- SQL 2000
- Synergy
- Anti virus etc. changed Norton daily scan and unaware that I have picked up any viruses - I was my hands very well and often
Over 6 months gradually CF has been slowly not display internal referenced <img src> tags. External work fine.
To the point now where most in our app do not display.
Then in the past 3-4 days a lot of pages when called give Firefox or IE errors:
Page will not display with too may users error.
But there aren't any others.
I go to all other web site, no issues with speed.
I just cold warm booted the machine and now while page 1 appears, page 2, login, takes minutes to appear. But on a beta server (also developer edition) it's instant.
When I go straight into the browser, it works fine, albeit no images, crashes with a known bug (missing application variable), fix it, then resume, then just sits there forever.
And there's no difference between the two machines ... well, not in "that" way.
Adding to my confusion is ... I cannot get into the CF Admin panel.
I can see it approve me, then it just spins.
Nothing has changed on machine in past weeks EXCEPT traveling when I sign in to the usual plethora of wifi and other networks but never had a problem - except luggability
I am thinking of, UGH, reinstalling Windows ... but why bother if it's working perfectly and only ColdFusion has an issue.
Now COLD booted machine for 5 minutes.
Everything seems better except CF still a BIT sluggish and still not "drawing" most images. Able to access Admin panel. Even if there images not displaying.
Anyone any ideas?

Thanks for your prompt reply ...
We scoured for a folder like that and found none.
What we DID find is that over the years of coding, we have a template count of 3,500 files in 130 folders, but the root where we start is about 1,500 files. 144 megs total size though.
That shouldn't be too much? Esp as our beta and production servers are using the same amount with no issues.
Admittedly production is CF 7.X.
Much more powerful machines but still.
It would have made sense as that is the only thing on the machine that has "grown" ... but no luck.
Does remind me of the day when our mail server got hacked and we had 100,000 outbound in the spool. That was fun.: :)

Image not displaying in the Task Sequence Wizard. SCCM2012

This is my question, so I will post the link here.
http://community.spiceworks.com/topic/925727-image-not-displaying-in-the-task-sequence-wizard-sccm2012
Bryan
I captured an image from a PC that I am preparing to be deployed with Office 365. Once I captured
the image, I went to the software library to add the operating system image. That seemed to go on without any issue, but when I look at the summary, I see the big yellow globe saying "in progress" it has not changed since yesterday afternoon.
I then created the task sequence for this image
to be deployed under Software Library, Task Sequences. When I selected the references tab, everything seemed to be in order with the exception of the "operating system image" under type. It was/is showing 0.0% Compliance.

So, the problem described in the other forum post does not match the title of this thread. Are you trying to address two different things? These are unrelated btw.
For the issue in the other thread, you'll have to troubleshoot your content distribution to the selected DP. The distmgr.log and pkgxfermgr.log (assuming you chose to distribute the image to a DP directly attached to your primary site) are the places to
start and will show you exactly what's going on.
As for the title of this thread, we'll need a lot more info to help you there.
Finally, I would suggest you copy your questions from other sources into the thread -- this will help other folks in the future that may stumble upon this thread and will prevent any confusion.
Jason | http://blog.configmgrftw.com | @jasonsandys

Help with background image (Not sure how to ask this..........)

I have just started to try and make my first site. I designed it in Photoshop first as I learned in many tutorials. I don't know why my background image looks like this when I scale down below 100%, but at 100% or "fit all"&"fit width" it doesn't change and I can't move it with the hand tool or scroll it. I'm sorry, I'm just learning.
Thank you.

Hello,
in addition, I tried this (page properties = translated from my German DW) too an the only difference had been this "missing end bracket".
<!doctype html>
<html>
<head>
<meta charset="utf-8">
<title>ioneglines.com</title>
<style type="text/css">
body {
background-image: url(myImage.png);
background-repeat: no-repeat;
</style>
</head>
<body>
</body>
</html>
... before you insert your image as a background image, you have to give it the dimensions, you want to see in your file. Please use try and error method.
Hans-Günter

Body background image not displaying in IE6

Similar Messages

Maybe you are looking for