BOM item number - not repeat the item number

Hi Friend,
I wonder if you can block the registration of the same item with item number in the BOM,we have some problens with other software that comunication with SAP.
Thanks
Exemplo:
Item            Material
0001           ABCDEFG
0001           HIJLMNOP   (this is problem, because there are two itens with item bom = 0001)
Edited by: Marcelo Marcelo Alexandre Oliveira on Oct 18, 2010 8:00 PM

Hi,
You have to go for a user exit for this purpose.
remmeber in case item is being changed with chnage number(with history req), it might show multiple line items with same bom item( but it will be for same bom compoennet)
Also i guess for alternate and discontinuation bom componenets line item number remains the same.

Similar Messages

11.1.1.4:Could not find the item selected to match the value of type Number

Hi,
I have a taskflow with an input parameter.
The input parameter value is to be assigned to a list item as the default selected value.
I have mapped the pageFlow scope parameter to set value to the list item using input page parameters defined in task flow.
but When i Run the task flow the value does not get assigned to the drop down list and jdevloper console screen shows up the following message
"Could not find the item selected to match the value 2 by type: oracle.jbo.domain.Number in LOV."
But If I click the Lov to check the values it shows that value is present in the list.
The same configurations works if the list of values is for a column with type as java.lang.String.
Is it somethng different that is to be done for a Number field to assign value from a taskflow parameter?
Edited by: user3067156 on Jun 25, 2011 3:34 PM

Hi Jobinesh,
I am assigning the default value in the task flow using input page parameters ...
<view id="VIEW1">
<page>/title.jsff</page>
<input-page-parameter>
<from-value>#{pageFlowScope.pInputTyp_Id}</from-value>
<to-value>#{bindings.pTyp_Id1.attributeValue}</to-value>
</input-page-parameter>
</view id>
It does not assign the value, if Bind variable(pTyp_Id1) NDtype and task flow input parameter(pInputTyp) class type, both are set to use type oracle.jbo.domain.Number.
If I change both to use java.lang.String and additionally also change the VO defination the accept the bind variable of type string, it assigns the value correctly.
Usecase:
I have a a task flow for which has its first page a search page.
The Search page is created using operation execute with params and dragging the query parameters on the page.
The Query parameters are to be filled using a select one choice option and the list is bound to the master values.
This task flow can be used inside a standalone page as a region to provide a search page
The same task flow can be called from within another taskflow which will provide the default values for the drop down lists ..
Since the search page is a jsff fragment i dont have a page on load handler to provide default values..
So assiging the values using input page parameters defined in task flow view tag.
For testing I am passing the taskflow input parameters by calling the task flow from a jspx page a region . When I configure this task flow a region in a page its asks for providing the values for the parameters
And the same gets configured in my testpage def as
<executables>
<variableIterator id="variables"/>
<taskFlow id="Flow1" taskFlowId="/WEB-INF/Flow1.xml#Flow1"
activation="deferred"
xmlns="http://xmlns.oracle.com/adf/controller/binding">
<parameters>
<parameter id="pTyp_Id" value="1207"/>
</parameters>
</taskFlow>
</executables>
Edited by: user3067156 on Jun 27, 2011 1:50 PM

ATTENTION!! RECEIVED FRAUDULENT EMAIL PRETENDING TO BE APPLE!! I received an email informing of a purchase made on my account and telling me to change my password if did not purchase the item, which I had not. I have received valid emails from Apple

ATTENTION!! RECEIVED FRAUDULENT EMAIL PRETENDING TO BE APPLE!! I received an email informing of a purchase made on my account and telling me to change my password if did not purchase the item, which I had not. I have received valid emails from Apple in the past asking letting me know a purchase had been made and asking if I had made the purchase, but the item listed has alway been a purchase that I had made. Since I had received similar emails in the past, I didn't think anything of it. Because I had not purchased the item listed, I immediately clicked on the link in order to change my password, which has been suggested in authentic emails i had received from Apple in the past. The site I was redirected to was exactly the same as the Apple site where you go to change your password. I entered my userID and password and it stated a verification email would be sent, if it was not sent click "resend email." When I did not receive an email, after about 10 seconds I went to the Apple site and followed the SAME EXACT step on pages that were IDENTICAL to the FRAUDULENT website I apparently had just been at. When I clicked "Send verification email," I DID receive an email within seconds, which had a special link that brought me to a page where I could change my password, which I did. I later compared a legitimate email to the FRAUDULENT email and I DID FIND A DIFFERENCE, BUT IT WAS ALMOST UNNOTICEABLE unless you were really, really looking. I doubt it would be noticed by anyone if not comparing it closely to a real email. THE DIFFERENCE WAS AT THE BOTTOM OF THE AUTHENTIC EMAIL, THERE WERE THREE LINKS THAT COULD BE SELECTED - My Apple ID/Support/Privacy Policy. ON THE FRAUDULENT EMAIL THESE LINKS WERE NOT PRESENT!!! Just today I received an email from Apple stating my password had been changed today. I did not change my password today. When I changed after getting the fake email, I did not think about my SECURITY QUESTIONS!!! If you forget your Apple password, you are able to answer the security questions in place of your ID and you get a confirmation email. Even though I changed my password within a one minute when I did not get a confirmation email with a link to change my password right away and I went dierctly to Apple's site, apparently it was enough time to take all the information on my account - INCLUDING MY DEBIT CARD NUMBER, WHICH HAD BEEN REQUIRED WHEN I INITIALLY SET UP THE ACCOUNT!!! Today I received a call from VISA FRAUD PROTECTION asking about strange activity on my account and stating they were concerned and wanted to ensure I had used the account. I HAD NOT, AND ALL THE MONEY IN MY BANK ACCOUNT HAD BEEN STOLEN!!!!! I am writing this in hopes that many people will see it and NOT FALL VICTIM TO THIS SCAM. Please pay close attention to any emails you supposedly receive from Apple - If the links "MY APPLE ID/SUPPORT/PRIVACY POLICY," PLEASE DO NOT ASSUME IT IS AN AUTHENTIC EMAIL FROM APPLE. I suggest you immediately forward the email to apple, which I didn't do because this happened days ago. Nothing was taken from my money that was already on the Apple account, and nothing had been taken from my checking account. I guess I assumed there had been something wrong with the link in the email directing me to where I could change my password, plus I had gone to the valid Apple website and changed my password for real, and I guess I was thinking that changing my password would prevent someone from being able to acces my account info. PLEASE DO NOT FALL VICTIM TO THIS SCAM AS I DID!!!!

No need for alarm. There are several folks a day posting like threads. Most folks know these phishing attempts for what they are and merely delete with prejudice.
To the bottom line... if you wish - and I am sure Apple will take notice - you should FORWARD the email to [email protected] and delete.
CCC

The payment request do not transfer the Item Text field to FI doc

The payment request do not transfer the Item Text (SGTXT) field to FI documents (accounting document) when they are paid by F111 and the payment request is created from repetitive codes (Trx FRFT_B). Therefore is not able to display a text description in the FI line items accounts, even the payment request document number is not available in the accounting document.
Even the program SAPLKKBL (F8BT) does not contain available the Accounting document.
So, there is not easy trace.
Does anybody know how can I match this?

This is the SAP Response:
Dear customer,
The standard FRFT_B transaction does not directly or indirectly pass
the text to the F111 payment document since the initial program design.
In other words, you will not able to experience the reported issue
in the system with standard SAP coding.
However, the text value can be passed via business transaction event
(BTE) for example or other modifications as a substitution.
I hope this confirmation of the standard system behaviour is
useful to you.
I regret not to be able to give you a positive answer.

Adobe photoshop cs2 download on adobe website does not work- the serial number does not work?

photoshop cs2 download on adobe website does not work - the serial number given isn't recognised when you enter it when trying to install. the live chat at adobe cannot help and suggested that I may find the answer here. Can anyone help with this?

Adobe has decommissioned the CS2 activation servers, so your old serial number is no longer usable.
If you download the special non-activating version of CS2 that Adobe has made available to licensed CS2 users, you MUST also use the new serial number provided by Adobe on that download page:
https://www.adobe.com/cfusion/entitlement/index.cfm?e=cs2_downloads
That S/N does work. I double checked.

The workflow could not update the item, possibly because one or more columns for the item require a different type of information. Outcome: Unknown Error

Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
Cheers

Hi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support

The workflow could not update the item, possibly because one or more columns for the item require a different type of information using Update Item action

I got error "The workflow could not update the item, possibly because one or more columns for the item require a different type of information "I found out the cause is Update Item action
I need to update item in another List call Customer Report ,the field call "Issues" with data type "Choice" to yes
then the error arise . please help..

Thanks for the quick response Nikhil.
Our SPF 2010 server is relatively small to many setups I am sure. The list with the issue only has 4456 items and there are a few associated lists, eg lookups, Tasks, etc see below for count.
Site Lists
Engagements = 4456 (Errors on this list, primary list for activity)
Tasks = 7711 (All workflow tasks from all site lists)
Clients = 4396 (Lookup from Engagements, Tslips, etc)
Workflow History = 584930 (I periodically run a cleanup on this and try to keep it under 400k)
Tslips = 3522 (Engagements list can create items here, but overall not much interaction between lists)
A few other lists that are used by workflows to lookup associations that are fairly static and under 50 items, eg "Parters Admin" used to lookup a partners executive admin to assign a task.
Stunpals - Disclaimer: This posting is provided "AS IS" with no warranties.

File Share.Could not find the item, this item is no longer here, check the location and try again

Hi all, I have a failover cluster Wiindows 2012 R2 server with file server.
A few days ago, when users try to rename folders and the following error can not be appearing:
"Could not find the item, this item is no longer here, check the location and try again"
When I enter as a domain administrator, I can rename the directory.
Do you know that you can be?
regards
Microsoft Certified IT Professional Server Administrator

Good afternoon,
and this solved it was a problem with
Windows 7 and Windows Vista
computers, a registry key that affects the
Explorer process is corrupted.
This registry key is ejcuta and
solves:
FolderDescriptions x86.reg
greetings To Your
Microsoft Certified IT Professional Server Administrator

Item category customizing issue(The item category 'SRTT' is not permitted

Hi guys:
I got a material product, the caterory of the product is created by myself.
I trid to add the product to my service order item, but the error message said ,"
<b>The item category 'SRTT' is not permitted for product 'BO_3000000018'.
Message no. CRM_ORDERADM_I507
Diagnosis
The item category SRTT is not allowed in Customizing for item category determination of the specified transaction type, or in the item category group of the product BO_3000000018.
System Response
The system does not allow the item to be processed further.
u can display the specified input options. Place the cursor in the document on the field Item category and choose F4 = input options</b>
I tried many item category but the same error kept jumping out.
does anybody know the solution? thanks!
best regards
Eric

Hi Eric
You nay have to set the item category determination properly.
Fileds are you chould have an entry which should be something like this
Trans type -
Item cat group---The item cat that has to appear in your doc.
for example:
TA -
Standard Group-----TAN
The Item category group field is in the one you have given in your material master.
Hope this helps you.
Alicia

Why is not updateable the Item of block?

I created a block, Update Allowed of the property of block is Yes, Insert Allowed is No, Locking Mode is Immediate.
Set Update Allowed of the property of the item vendor_name is Yes.
Compile the form.
Open the form , but can not update the item vendor_name , Why is that?
Thank you.
Edited by: huak on Sep 2, 2008 9:02 PM

Can you give some more detail on what happens when you try to update the field?
Can you place the cursor in it?
Are you trying to add more characters to the field, change a highlighted character or delete a character?
Does the field flicker when you type something or does it not respond at all?

I purchased a new computer and also Adobe acrobat XI Pro. It has not worked properly. I uninstalled it and tried to reinstall it, but the computer will not accept the Serial number. What can I do?

I purchased a new computer and also Adobe acrobat XI Pro. It has not worked properly. I uninstalled it and tried to reinstall it, but the computer will not accept the Serial number. What can I do?

Hi,
Have you tried the help documents below:
Error "The serial number is not valid for this product" | Creative Suite
Invalid serial number error
In case of any other error message, please specify.
Regards,
Sheena

On OSX 10.6.8 Mac Mail sent items do not show the Bcc field. Adjusting settings in mail/prefs/viewing/custom/bcc has no affect on Mail, ie Bcc still does not appear on sent items. Anyone got a fix?

On OSX 10.6.8 Mac Mail sent items do not show the Bcc field. Adjusting settings in mail/prefs/viewing/custom/bcc has no affect on Mail, ie Bcc still does not appear on sent items. Yet another example of Mac caring not a jot about the performance of versions of OS and software running on on older hardware. Anyone got a fix by any chance? Oh and fyi I need to see the Bcc in sent items to confirm sent email is attaching to Salesforece - when I see the Bcc I know I can delete it as a copy will be in SForce. Big thanks W.

On OSX 10.6.8 Mac Mail sent items do not show the Bcc field. Adjusting settings in mail/prefs/viewing/custom/bcc has no affect on Mail, ie Bcc still does not appear on sent items. Yet another example of Mac caring not a jot about the performance of versions of OS and software running on on older hardware. Anyone got a fix by any chance? Oh and fyi I need to see the Bcc in sent items to confirm sent email is attaching to Salesforece - when I see the Bcc I know I can delete it as a copy will be in SForce. Big thanks W.

I have here an iPod touch Model number a1288 but the last number to me also looks like a 3. But that isn't my point. I'm here asking this question,. I broke my screen today and I was wondering if it mattered or not if i put on a ipod touch 2nd or 3rd then

I have here an iPod touch Model number a1288 but the last number to me also looks like a 3. But that isn't my point. I'm here asking this question,. I broke my screen today and I was wondering if it mattered or not if i put on a ipod touch 2nd or 3rd then LCD and Screen. I really don't want to buy a new iPod and i've had this for a long time and its still working fine for me. Ijust need something that will play my music at work. Please someone helpp.

You can check your model here: iPod Touch - Wikipedia, the free encyclopedia
and search this place for parts that would fit.

I just updated to XI, but it will not accept the serial number [Was: Penny - secretary]

I just updated to XI, but it will not accept the serial number

Hi there
If you have purchased an Acrobat XI upgrade you will be prompted to enter the Acrobat XI serial number first then the serial number for the prior version.
Which serial number isn't being accepted? Please provide more details and send me a private message with both serial numbers so I can check further.
Thanks
Bev

Did not receive the serial number by mail. What should I do ?

Did not receive the serial number by mail by the product I paid and I can not communicate with the company. What should I do ?

Check the email address for your account and make sure it is active.
Try contacting Adobe Support by phone or chat and see if they can assist you.
Phone support | Orders, returns exchanges
http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Creative Cloud support (all Creative Cloud customer service issues)
http://helpx.adobe.com/x-productkb/global/service-ccm.html ( http://adobe.ly/19llvMN )

BOM item number - not repeat the item number

Similar Messages

Maybe you are looking for