Bonjour j'ai réinstaller windows 8.1, je n'arrive pas à récupérer mes anciens marque page etc qui étaient pourtant synchronisé

J'utilise depuis plus d'un an firefox sur différents appareil smartphone, tablette android, un pc et un pc portable, mon portable s'est planté grave, j'ai réinstallé windows 8.1 et firefox (je crois que c'est la nouvelle version) je me suis connecté à sync avec mes coordonnées, mais je n'arrive pas à retrouver mes marque page etc sur le serveur (comment dois-je faire)?
Je ne trouve nulle part une façon de récupérer les données du serveur

hello anddvl, firefox 29 has introduced a new sync system which isn't compatible with accounts set up in prior versions.
in this case you'd probably have to use a workaround and first download the prior firefox 28 version and disable automatic updating for the moment (in options > advanced > update): [[Install an older version of Firefox]]
then try to link your restored windows 8.1 pc to the old sync account by using a pairing code generated by one of your other devices, which are still connected to the old account.
after you have successfully restored your data this way you can upgrade to firefox 29 and probably also switch to the new sync system on all of your devices: [[How to update to the new Firefox Sync]]

Similar Messages

Bonjour je n'arrive pas à récupérer mes contacts sur icloud

bonjour,
je me suis fais voler mon iphone j'aurai voulu récupérer mes contacts avec icloud mais je n'y arrive pas si quelqu'un peut m'aider svp......

I think a lot of peole are have this cannot backup problem. My strategy is to wait a day or so and then try again.

IPhoto : application endommagée ou incomplète après installation de Ilife. Comment récupérer mes photos SVP??

Bonjour à tous,
Suite à l'installation de Ilife sur mon mac (sans CD d'installation - je ne voulais utiliser que Imovie). Iphoto n'est plus accessible. j'ai un message qui apparaît me disant que Iphoto ne peut s'ouvrir car l'application est soi endommagée soi incomplète. Comment est ce que je peux récupérer mes photos svp??
Merci infiniment de votre
Hello everyone,
I wanted to use Imovie so I installed Ilife on my mac without and installation CD. After that Iphoto was unavailable. It says : can't open, application can be damaged or incomplete.
How can i get all my photos back please?
Thank you very much for your Help !

To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.

Bonjour, est-il possible de récupérer mes photos, contact après une mise à jour qui m'a apparemment tt effacé et mes sauvegardes icloud n'avaient pas fonctionnées??..:/

bonjour, est-il possible de récupérer mes photos, contact après une mise à jour qui m'a apparemment tt effacé et mes sauvegardes icloud n'avaient pas fonctionnées??..:/

n'ayant pas l'assistance promise par le site d'aide, d'un tchat avec des experts jours et nuits toute la semaine ...
je continue le sujet ; j'ai fait une nouvelle tentative en désactivant le mode sans échec avant de réinstaller adobe, j'ai supprimé tous les composants adobe possibles et même ceux cachés comme selon le modèle mis à disposition sur le forum par un utilisateur ... je ne sais pas encore si cela fonctionne ; cela fait déjà 12heures que j'y suis, il va me falloir bien 1 heure pour installer un logiciel ; j'espère ... je ferais suivre l'article
il faut peut être un autre article concernant le tchat permanent d'assistance en ligne inexistant ?
c'est scandaleux qu'ils envoient les gens télécharger en mode sans échec alors qu'il n'est pas possible de se connecter ; en plus le modèle d'assistance que j'ai eu sur le forum ne convient pas à windows8

OS Windows Vista Ultimate - HP LAser Jet 1000 - Firefox will not print out internet page etc...

OS Windows Vista Ultimate - HP Laser Jet 1000 - Firefox will not print out internet page etc...
That simple, find an page you want to print, hit the print button and zero zip zlich.
Works just fine with IE?????

See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages

Bonjour à tous, je viens d'installer windows 7 avec bootcamp.L'installation semble s'être bien passée.Au demarrage du mac quand je choisis window7, alors j'obtiens un ecran noir avec un trait qui clignote et la machine redemarre sans cesse. Une solution?

bonjour à tous, je viens d'installer windows 7 avec bootcamp.L'installation semble s'être bien passée.Au demarrage du mac quand je choisis window7, alors j'obtiens un ecran noir avec un trait qui clignote et la machine redemarre sans cesse. Une solution?

But at startup when I choose windows 7 I get a black screen with a clignottant dash and mac starts ever.
If You Have Problems Installing the Device DriversIf it appears that the Boot Camp drivers weren’t successfully installed, try repairing them.To repair Boot Camp drivers:
1 Start up your computer in Windows.
2 Insert your Mac OS X installation disc.
3 If the installer doesn’t start automatically, browse the disc using Windows Explorerand double-click the setup.exe file in the Boot Camp directory.
4 Click Repair and follow the onscreen instructions.
If a message appears that says the software you’re installing has not passed WindowsLogo testing, click Continue Anyway.If you need to reinstall specific drivers, you can install one driver at a time. For example,if your built-in iSight camera isn’t working, you can reinstall just the iSight driver.
Individual drivers are in the Drivers folder on the Mac OS X installation disc.
To reinstall a specific driver:
1 Insert your Mac OS X installation disc.
2 Quit AutoRun if it opens.
3 Using Windows Explorer, locate the driver that you want to reinstall.
4 Open the driver to start the installation.
https://discussions.apple.com/thread/3301234
OS X Lion: About Lion Recovery
https://support.apple.com/kb/HT4718
https://support.apple.com/kb/HT5034
Boot Camp 4.0, OS X Lion: Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/

Bonjour, Je n'arrive pas à installer la mise à jour 10.7.5 sur mon Mac. La mise à jour commence à se télécharger et s'arrête en plein milieu en affichant ce message d'erreur : "La mise à jour « Mise à jour Mac OS X » n'a pu être enregistrée La mise à

Bonjour,
Je n'arrive pas à installer la mise à jour 10.7.5 sur mon Mac Book Air.
La mise à jour se télécharge et, aprsè redémarrage, s'arrête en plein milieu de la mise à jour en affichant ce message d'erreur :
"La mise à jour « Mise à jour Mac OS X » n'a pu être enregistrée
La mise à jour n'a pas pu être vérifiée et peut avoir été endommagée au cours de son téléchargement. Elle sera téléchargée mais à nouveau recherchée au prochain lancement de Mise à jour de logiciels."
Sauf qu'au prochain lancement de Mise à jour Logiciels évidemment, elle ne se retélécharge pas.
Quelqu'un pourrait m'aider ?
Merci beaucoup !
Hello,
I do not succeed to install the update 10.7.5 on my Mac Book Air.
Download happens but after restaring the update is underbroken with the following error message :
The update 'Update Mac OS X could not be saved.
The update could not be checked and could have been damaged during the download. It will be downloaded again at the next launch of Software Update.
But obviously it does not happen.
Could someone help me?
Thanks a lot.

Read this whole message before doing anything.
Back up all data. Quit the App Store application if it’s running. Take the following steps until the problem is resolved.
Step 1
Triple-click the line below to select it:
/Library/Preferences/com.apple.SoftwareUpdate.plist
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a file selected. Move the selected file to the Trash, leaving the window open. Relaunch the application and test. If there's no change, quit again and restore the file you moved from your backup, overwriting the one that may have been created in its place. Otherwise, recreate your settings in theSoftware Update preference pane.
Step 2
Hold down the option key and select
Go ▹ Library
from the Finder menu bar. Move the following items from the Library folder to the Trash (some may not exist):
Caches/com.apple.SoftwareUpdate
Preferences/com.apple.SoftwareUpdate.plist
Preferences/ByHost/com.apple.SoftwareUpdate.*.plist
Saved Application State/com.apple.SoftwareUpdate.savedState
Here, "*" stand for a long string of letters, numbers, and dashes. Leave the Library folder open. Try Software Update again. If it works now, stop here. Close the Library folder.
Step 3
If you still have problems, quit the App Store again.
Triple-click anywhere in the line below to select it:
rm -fr $TMPDIR../C/com.apple.SoftwareUpdate
Copy the selected text to the Clipboard (command-C).
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal. Test.

Impossible de partitioner le disque dur pour installer Windows

Hello,
I tries to put windows 7 on my MBP ( MacBook Pro (Retina, 15-inch, Late 2013 / OS X 10.10.2   ) with BootCamp , unfortunately after installing everything on the key bootable usb mac asks me to create a partition for Windows, and this bug : s : after ten seconds I have " your disk could be partitioned an error occurred while partitioning "
Thanks you ( sorry i'm not very good in english so i used translation by google
Bonjour,
j essaye de mettre windows 7 sur mon MBP via BootCamp, malheureusement après avoir tout installer sur la clef usb bootable le mac me demande de créer une partition pour Windows, et la ça bug :s : après une dizaine de seconde j ai : "votre disque n a put être partionné une erreur s'est produite   lors du partionnement"
Merci

Ouvrez le Finder. Du haut du menu barre du Finder de votre écran, cliquez sur Aller> Aller au dossier
Tapez ou copiez / coller: / Bibliothèque / Application Support
Puis cliquez sur OK et déplacez les fichiers ,Paragon NTFS for Mac OS X/Mount Notification.app/Contents/MacOS/Mount Notification, dans le dossier Application Support dans la Corbeille.
Redémarrez votre Mac à tester.

Comment installer windows sur Mac

Bonjour,
Je voudrais installer windows sur mon mac mais je ne sais pas trop comment faire à l'aide de boot camp. À-t-on besoin d'un CD d'installation windows. Si oui ou peut-on s'en procurer et à quel prix?

Bonjour,
Je voudrais installer windows sur mon mac mais je ne sais pas trop comment faire à l'aide de boot camp. À-t-on besoin d'un CD d'installation windows. Si oui ou peut-on s'en procurer et à quel prix?

Printer is connected. How to get rid of installation window upon boot-up?

I have an Officejet 4500; successfully connected to desktop (Windows Ultimate Vista OP). However, had a problem when connecting to laptop (Windows XP). When getting to configuration step, had a fatal error. Folllowing instructions in auto-dowloaded "HP Installation Error - XP" application, subsequently, downloaded drivers, utlities, etc. Finally was able to print off of laptop. However, everytime I boot up computer now, an installation window auto-appears with a Fatal Error message, then it runs through all the installation steps again, stalls at the configuration step, then I have to click a Finish button to finish an "uninstall" (which it does not do, the printer is still installed). So, to continue using the computer, I have to click the Cancel button in the middle of the "install" operation, use the computer for other things I need to do, then I can't shut down until it completes its "Uninstall" process again. The printer is connected...HOW do I get rid of the install window that auto-appears when I boot up? (There is NO "Close" button or icon.)

I have an Officejet 4500; successfully connected to desktop (Windows Ultimate Vista OP). However, had a problem when connecting to laptop (Windows XP). When getting to configuration step, had a fatal error. Folllowing instructions in auto-dowloaded "HP Installation Error - XP" application, subsequently, downloaded drivers, utlities, etc. Finally was able to print off of laptop. However, everytime I boot up computer now, an installation window auto-appears with a Fatal Error message, then it runs through all the installation steps again, stalls at the configuration step, then I have to click a Finish button to finish an "uninstall" (which it does not do, the printer is still installed). So, to continue using the computer, I have to click the Cancel button in the middle of the "install" operation, use the computer for other things I need to do, then I can't shut down until it completes its "Uninstall" process again. The printer is connected...HOW do I get rid of the install window that auto-appears when I boot up? (There is NO "Close" button or icon.)

Lenovo IdeaCentre A720 - Clean Installation Windows 8.1 Pro x64 and Office 2013 x64

GUIDE: Clean Installation Windows 8.1 Pro x64 and Office 2013 x64
Note: for a good performance is recommended to use a SSD for Windows with a minimal of 128GB and use the HDD for Data
Driver up to date - Sep 2014
First you need to download and have ready the following softwares:
Classic Shell V4.1: To get back the Start Button like Windows 7
http://www.fosshub.com/Classic-Shell.html/ClassicShellSetup_4_1_0.exe
Broadcom BT for Windows 7 (64-bit) - to enable dongle, Windows 7 Live DVD and USB Drive.
http://download.lenovo.com/consumer/desktop/h1100174.exe
Realtek Cardreader Driver Windows 8.1 (64-bit) V6.2.9200.29070. To be able to use the card reader
http://download.lenovo.com/consumer/desktop/h1101061.exe
NV VGA Driver for Windows 8.1 (64-bit) V340.52. Latest video driver for NVIDIA video cards
http://www.nvidia.com/content/DriverDownload-March2009/confirmation.php?url=/Windows/340.52/340.52-n...
Lenovo Silver Silk Keyboard Driver for Windows 8.1 (64-bit) V1.05. To be able to see when Caps Lock or Number Lock is press
http://download.lenovo.com/consumer/desktop/h1100842.exe
Yuan MC907 TV Tuner Driver for Microsoft Windows 7 (64-bit) V6.14.10.416. To be able to use the Yuan TV card
http://download.lenovo.com/consumer/mobiles/tvt129w8164.exe
OSD APP for Windows 8.1 (64-bit) V1.1.06. To be able to use UP or Down Volume for Touch keys in the screen.
http://download.lenovo.com/consumer/desktop/h1100547.exe
Windows 8.1 x64 Installation DVD and Office 2013 x64
Follow this procedure for the installation:
Install Windows 8.1 Pro x64 using the general or personal key
Just to avoid install an old Video Driver from windows update, disable the Wi-Fi or Interned connection
Install Office 2013 x64
Install the Video Driver “340.52-notebook-win8-win7-64bit-international-whql.exe” just let the setup to uncompress the files in “C:\NVIDIA” folder, do not continue to avoid the installation of other software that you may never use. Go to “Device Manager” and Right click properties in the display adapter, press “Driver” - “Update Driver” select browse my computer and give the path “C:\NVIDIA” press next and close after installation finish
Enable Wi-Fi and open Control Panel – Programs – Turn Windows features on or off and select “.NET Framework 3.5” hit OK, after the installation finish, reboot PC
Install “ClassicShellSetup_4_1_0.exe” follow instruction and configure the way you may like
Run file “h1101061.exe”, unselect “Install Realtek Card Reader Driver” and press finish. Path for driver is "C:\EXEBuild\Realtek Card Reader Driver”. Go to “Device Manager” and Right click properties in the unknown devices, press “Driver” - “Update Driver” select browse my computer and give the path “C:\EXEBuild\Realtek Card Reader Driver” press next and close after installation finish
Install “h1100842.exe” backup driver location is “C:\EXEBuild\Lenovo Silver Silk Keyboard Driver” after installation is done, go to “C:\Program Files (x86)\Lenovo\Lenovo Silver Silk Wireless Keyboard” and Right Click in the file ‘”skd8861.exe” properties – compatibility – change setting for all users and select run compatibility mode for “Windows 7” press OK and OK
Run “tvt129w8164.exe” unselect “Install TV Tuner” and press finish. Path for driver is “C:\drivers\TV Tuner (Geniatech, Yuan, AverMedia)”. Go to “Device Manager” and Right click properties in the unknown devices, press “Driver” - “Update Driver” select browse my computer and give the path “C:\drivers\TV Tuner (Geniatech, Yuan, AverMedia)” press next and close after installation finish
Run “h1100547.exe” unselect “Install A7 OSD APP now” and press finish. Path for driver is “D:\EXEBuild\A7 OSD APP”. Run the file “setup.exe” do not reboot the PC and ensure the folder been created during the installation “C:\Program Files (x86)\Lenovo\Lenovo BrgVolOSD” with this two files “BrgVolOSD.exe” and “CD_DLL.dll”, if this fail go to next step, if not, avoid next step. Normally a successful installation of this file depend of “.NET framework 3.5”
Go to control panel and uninstall “Lenovo OSD”, run the previous “setup.exe” and during the process of the installation, be ready to make a copy for the temporal file name “setup.msi” created in  “C:\Users\YOURUSERNAME\AppData\Local\Temp”, copy file “setup.msi” in “C:\” and run CMD in administrator mode and go to “C:\” using “CD \ + ENTER”, now use the following command “C:\msiexec.exe /a c:\setup.msi + Enter” the folder “C:\Program Files (x86)\Lenovo\Lenovo BrgVolOSD” with this two files “BrgVolOSD.exe” and “CD_DLL.dll” will be created
Create a shortcut “BrgVolOSD” and copy this in the startup folder “C:\ProgramData\Microsoft\Windows\Start Menu\Programs\StartUp”
Update Bluetooth driver using windows update if Windows detect the dongle, if not go to next step
If Bluetooth is not detected, mean that the actual hardware somehow is disabled. In order to enable, boot the PC with a Windows 7 live DVD with the USB drive installed in the PC. After PC been running with Windows 7 live, Install the file “h1100174.exe” previously copy in the USB drive. Use the USB drive also as installation path for the Bluetooth software, when the installation is done, look in the folder “X:\Program Files\Lenovo\Bluetooth Software” and run the file name “BTTray.exe”, press right click in the Red Bluetooth icon on the taskbar to enabled the Bluetooth dongle. Reboot PC in Windows 8.1 without any DVD media inside, this time Windows 8.1 will be able to recognize the Bluetooth and install the respective drivers.
     Another way, install the latest release from Broadcom BTW_12.0.0.9820 from the following link:
                                                                        BTW_12.0.0.9820.zip
    directly in Windows 8.1. Remember if the software is uninstall the Bluetooth will be disabled and
     Windows will not be able to see the device in the “Device Manager”
Last step, use your own Windows 8.1 Pro Key and Office 2013 key to register and activated your legal copy of the Microsoft software’s.
Final, enjoy.
This guide was creates for me to help peoples like me in this community.

bump

Photoshop CS3 installer window not opening.

After i clicked yes on the warning that installing makes changes to the computer, nothing installer windows appear, with windows 7 32-bit os, intel dual core 2GHz processor and a 2GB of ram.

What is on your desk top is the installer.
Now you have to run that.

Can't get to the installation window for Panther 10.3 upgrade

Hello all, thanks for reading,
Here's the deal:
I have an iMac, 500 Mhz, G3, 128 RAM that originally has Mac OS 9 built into it. Recently (a day or two ago), I wanted to format my computer because it was giving me too much trouble (a message saying that there wasn't enough memory kept appearing and askign me to quit an application to free some up), so I introduced the Mac OS 9 restoration disk and initialized my HD.
Everything went well, I was able to re-install the OS 9 and the necessary upgrades (up to 9.2.2) so that I could re-install my Panther 10.3 OS. However, when I reboot the computer with the installation disk in (so as to get to the installation window) it hangs when it reaches the white screen with the grey apple in the middle and the spinning thing on the bottom. It does not freeze up, 'cause you can see that the spiral still goes round and round, but disk activity ceases and it does not progress further than that (I have left it up to an hour in that state and nothing happens).
What can be my problem? The disk is in good conditions, and it is not the driver because I can run any other cd and it even reads the Panther disks (all of the 3)..... please help!
Thank you.
iMac Mac OS X (10.3) 128 RAM - 30 Gb HD - 500 Mghz - G3 PowerPC

Psike:
Welcome to Apple Discussions.
To install Panther your computer will need to meet the minimum system requirements for Panther. Your RAM seems to be very marginal and I recommend that you upgrade your RAM to at least 256 MB or better still max it out to 1 GB.
You will need to purchase the Full Retail version of Panther. Be aware that Computer specific or upgrade versions should be avoided since they are optimized for the computer to which they are specific and will therefore very likely cause problems during or after installation. On the legal side, it may be a violation of the Software License Agreement which statesThis License allows you to install and use one copy of the Apple Software on a single computer at a time. This License does not allow the Apple Software to exist on more than one computer at a time...If you do not have a Full Retail Version you can purchase universal installer Panther disks, guaranteed to install, from applerescue.
In terms of your specific problem. Here's what I suggest:
Insert Installer disk and Restart, holding down the "C" key.
Go to Installer menu and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need to use a utility like Tech Tool Pro or Disk Warrior
After disk has been repaired, with Disk Utility still launched and in the First Aid tab:
Click Repair Disk Permissions button.
Quit Disk Utility and open installer.
Select install option.
You may wish to Customize by deselecting Foreign Language Translations, unless you need it, and Additional Printer Drivers. This saves some disk space.
Proceed with installation.
After restart and set up:
Restart computer
Go to Applications > Utilities > Disk Utility
Repair Disk Permissions (as before)
Go to Apple Menu > Software Update
Install all updates
Repair Disk Permissions again.
Please post back with questions or comments.
Good luck.
cornelius
Message was edited by: cornelius

Acrobat 9.5 pro keeps opening Windows installation window when clicked on icon.

Opens normally PDF documents. And the fix is ...?

Hi Ajlan,
OK, it's odd, Acrobat launches normally only from its folder.
Any new shortcut created either on Start or Task bar opens Windows
installation window but the one on Desktop is OK.
Unfortunately I don't use Desktop shortcuts.
Windows 7 Pro SP1 64 bit
Regards,
Marek Solarz

How do I define 2 disk groups for ocr and voting disks at the oracle grid infrastructure installation window

Hello,
It may sound too easy to someone but I need to ask it anyway.
I am in the middle of building Oracle RAC 11.2.0.3 on Linux. I have 2 storage and I created three LUNs in each of storage so 6 LUNs in total look in both of servers. If I choose NORMAL as a redundancy level, is it right to choose my 6 disks those are created for OCR_VOTE at the grid installation? Or should I choose only 3 of them and configure mirroring at latter stage?
The reason why I am asking this is that I didn't find any place to create asm disk group for ocr and voting disks at the oracle grid infrastructure installation window. In fact, I would to like to create two disk groups in which one of groups contains three disks those were brought from storage 1 and the second one contains rest three 3 disk that come from the last storage.
I believe that you will understand the manner and help me on choosing proper way.
Thank you.

Hi,
You have 2 Storage H/W.
You will need to configure a Quorum ASMDisk to store a Voting Disk.
Because if you lose 1/2 or more of all of your voting disks, then nodes get evicted from the cluster, or nodes kick themselves out of the cluster.
You must have the odd number of voting disk (i.e 1,3 or 5) one voting disk per ASM DISK, So 1 Storage will hold more voting disk than another storage.
(e.g 3 Voting Disk - 2 voting stored in stg-A and 1 voting disk store in stg-B)
If fail the storage that hold the major number of Voting disk the whole cluster (all nodes) goes down. Does not matter if you have a other storage online.
It will happen:
https://forums.oracle.com/message/9681811#9681811
You must configure your Clusterware same as RAC extended
Check this link:
http://www.oracle.com/technetwork/database/clusterware/overview/grid-infra-thirdvoteonnfs-131158.pdf
Explaining: How to store OCR, Voting disks and ASM SPFILE on ASM Diskgroup (RAC or RAC Extended) | Levi Pereira | Oracl…

Bonjour j'ai réinstaller windows 8.1, je n'arrive pas à récupérer mes anciens marque page etc qui étaient pourtant synchronisé

Similar Messages

Maybe you are looking for