Boot Camp ?'s and Can I install bootcamp w/ Windows 7 64-bit?

Also wondering when I try to partition my disk I get this error message "The disk cannot be partitioned because some files cannot be moved- back up the disk and use disk utility to format it as a Single Mac OS Extended (journaled) volume. Restore your information to the disk and try using bootcamp again" Any one know what that means or can answer the win 7 question??

Boot Camp forum:
http://discussions.apple.com/category.jspa?categoryID=237

Similar Messages

HT201468 Can I install on MacBook Windows 32-bit version

Can I install on MacBook Windows 32-bit version? I went through the installation and when I try to run the update on Windows (due to no internet access) I receive a comment that the Windows and Boot Camp Windows update don't agree? I downloaded Windows update through Boot Camp process?

From the same link posted earlier,
Mac model
Windows 8 64-bit
Windows 7 64-bit
Windows 7 32-bit
Windows Vista 64-bit
Windows Vista 32-bit
Windows XP 32-bit
MacBook Pro
(15-inch, Late 2011)
5
5
4
You can install W7 32-bit, but you will need to use Boot Camp Support Software 4.0.4033 drivers. You will need to run Bootcamp Assistant 4 from an older version of OSX. You can install OS X: Installing OS X on an external volume - Apple Support which has BCA 4.x and then install W7 32-bit.

Boot camp: partition created can't install windows

I created a 63GB partition.
and during the bootcamp install it rebooted but never opened again and the Mac mini just spun and spun for a while and I then just reset it. though, the screen is black but I can hear the Mac spinning...I reset but this time use the OPTIONS button and it brings me to choices:
My HD, My time machine, windows, recovery, and EFI?
So DUH I choose windows and the screen goes blank, and the system just spins and spins.....
CAn I restart the Bootcamp assistant and jump back in at the INSTALL WINDOWS step?
thanks in advance
WINDOWS-7-64
MACMINI 2011, ( just bought it a few weeks ago)
created the windows support software

So let me get this straigt, you went through the installation process for setting up windows7 using the bootcamp assistant.YES. IT CREATED A PARTITION AND AFTER IT FOUND THE WINDOWS INSTALLER AND DID IT'S THING IT SHUT DOWN.
i WAITED FOR IT TO WAKE UP AGAIN BUT THE SCREEN STAYED DARK BUT THE FAN JUST RAN AND RAN. SO AFTER 10 MINS. OR MORE I JUST HELD THE POWER BUTTON IN UNTIL IT SHUT OFF.
TURNED IT BACK ON WITH THE OPTION KEY HELD DOWN.
THE SCREEN OPENS WITH THE FOLLOWING ICONS: HD, TIME MACHINE, WINDOWS, EFI BOOT.
After the set up, you are not able to access windows7 when you start the mac holding down the option button at start up or reboot after selecting the windows os. WINDOWS DID NOT INSTALL.
I NEED TO GET INTO THE PARTITION AND INSTALL WINDOWS.
If you have not been able to acess win7 and have not had a chance to get it up and running with any personal info that would need backing up, just delete the win7 partion using boot camp assistant and start over. Yes, you will have to create your partition all over again, but all that is maybe on it is the basic install of win7.
Make sure you have installed the Windows support software.
WHEN I WENT BACK INTO THE BCA. THE ONLY OPTION WAS TO REMOVE WINDOWS-7. aFTER CLICKING CONTINUE....I SEE THE ICON OF MY HD TO RESTORE TO THE ORIGINAL SIZE...WHICH MEANS IT WILL REMOVE THE PARTITION AND EVERYTHING CURRENTLY ON MY HD NOW----RIGHT?
THANKS FOR YOUR TIME MAN!

Can't install itunes on windows 64 bit system

I tried to install itunes on my 64 bit machine, but with verson 6.0.5, it says this software doesnt support 64 bit systems. I tried to install an earlier version i think its 6.0.4.2 not sure, but it does install on my computer. When I try to open the program and quicktime, I get error box saying the program had a problem and couldn't open. Is there anyway to fix this problem, and is there a way to have the newest version of itunes to work on windows 64 bit?
Windows XP Pro

iTunes and QuickTime have never been supported on the 64-bit version of Windows (look here for the official statement). Some people have managed to get it working (at least tolerably), but from what I've read, a recent update from Microsoft has caused a lot of problems. You might try rolling back recent Windows updates and see if you can get things working again.

Error numbers are 2502 and 2503 for installing iTunes for Windows 64 bits. How to fix?

Hey guys,
I cannot install iTunes (latest vision) on my new laptop (Windows 64 bits), and it says that the error numbers are 2502 and 2503...
Can someone tell me how to fix this?
Thank you!

Check your system date & time is correct.
Run the System File Checker: http://support.microsoft.com/kb/929833
If you still have problems try a creating a new user account with administrator rights, log into it, and attempt the install from there.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for performance issues or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Boot Camp "Quit and install later" corrupted the BOOTCAMP partition

I just had my new iMac delivered.
The first things I did was to run Software Update to install 10.6.8, then I installed 10.7.1 Lion and ran Software Update again just to be sure I got everything up to date as it should be. After installing a couple of applications via App Store and the web I set about to create a Boot Camp partition for my Win7 needs. When the assistant was finished (a new partition created and drivers saved to a USB memory stick) and told me it was ready to install Windows, but I choose Quit and install later (and oh, what I now regret that choice) because my Windows DVD was nowhere to be found (I should have looked a little harder).
Then when I later found the Windows 7 install DVD I launched Boot Camp Assistant again, but lo and behold when it tells me that I need to reformat my partions and start over from scratch. Boot Camp Assistant refuses to let me install Windows because I choose Quit and install later.
I have tried the following things to solve the problems:
Repair permissions and repairing the disk.
Start with the bundled OSX DVD to run fsck -fy followed by Disk Utility.
Re-format the BOOTCAMP partition.
Boot from the Windows 7 DVD (which claims something along the lines that the partition does not support Windows installations).
Nothing works! Why? How do I solve this?

The past and having used whatever. FWB HDToolkit, Silverlining, $10K worth of scsi means??
windows requires that the partition table and format (GUID) has full functional MBR that Windows and Mac can work with.
Ever heard of take your best guess and double it for how much space to allocate? or no matter how good your partitions will always need to be changed.
Apple (that pdf guide?) is quite clear about one thing, which I usually but not here, take with grain of salt, that Boot Camp Assistant is a one trick pony to do the job of setting aside unfragmented free space for Windows.
ie, you can't use FWB Toolkit of SoftRAID 4.0 (excellent though it is!). Though Paragon CampTune (the company is rare, supports Boot Camp etc) and can be used.
If you created it now, but then you had 10.7 and Boot Camp 4, I could possibly get my head to imagine there could be an issue. And that is because every OS version has new changed partition table changes, making for this old (65 and going) mainframer to re-initialize drives whenever there is a change.
You can clone your system, format, and restore nice and clean with SuperDuper in a Jiffy. So why bother now? can't see it.
I understand people wanting 3 or more partitions. Wanting Windows to boot off external drive. Or use GPT and UEFT (that may happpen as 3TB drives and is beginning to be supported, but so far Apple and EFI are closed, proprietary, and GPT booting and EFI go hand in hand) but extra partitions is just... wishful.

Can not boot into OSX after boot camp installation and resizing of Macintosh HD

So from the beginning what I was trying to do was set up my iMac (27-inch, Late 2013) with boot camp so that I could play some old windows based games that can not be played in Parallels.
I went through the Boot camp process and everything set up just fine.
I had both OS X Yosemite 10.10.2 and Windows 8 Professional running but as I was installing games on to boot camp I discovered I did not allocate enough space and needed to extend the Boot Camp partition.
I used boot camp utility to set OS X as the default start up disk and had it restart
I launched into OS X and used Disk Utility to shrink Macintosh HD another 120GB
Restarted again holding option and launched into Windows
Used the disk management in windows to try and extend the boot camp partition into the unallocated space.
It was not an option to extend it so I tried to create a new simple volume from the unallocated space then delete it and try to extend it again.
It still was not an option.
From there I went to restart again while holding option and the only options I had were 10.10 Recovery and Windows
I tried using disk utility in recovery and Macintosh hd now only showed disk0s2
I tried to verify and it could not verify
I tried to repair and it could not repair.
I put the iMac in target disk mode and using a thunderbolt cable I tried using disk utility from my MacBook Pro (13-inch Mid 2012)
Verifying volume “disk2s2”Verifying file system.** /dev/rdisk2s2
Invalid BS_jmpBoot in boot block: 000000
File system check exit code is 8.Error: This disk needs to be repaired. Click Repair Disk.
Verify and Repair volume “disk2s2”Repairing file system.** /dev/rdisk2s2
Invalid BS_jmpBoot in boot block: 000000
File system check exit code is 8.Updating boot support partitions for the volume as required.Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
This is the same error I got on my iMac
I used terminal diskutil list and got:
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *1.0 TB     disk2
   1:                        EFI EFI                     209.7 MB   disk2s1
   2:       Microsoft Basic Data                         799.3 GB   disk2s2
   3:                  Apple_HFS Recovery HD             650.0 MB   disk2s3
   4:       Microsoft Basic Data BOOTCAMP                70.3 GB    disk2s4
I can see that Macintosh HD was disk2s2 but it now shows its Microsoft Basic Data.
I did not format this partition and it was working fine till I restarted the computer after resizing Macintosh HD.
I am not sure what I can do to fix this.
I've found multiple articles about similar issues, but the issue thet they have was that they could not boot to Windows instead of my issue not booting to OS X

****************    Update    *****************
From the Windows Partition using Disk Management I can see that the drive is still labeled Macintosh HD and that all of my data is there.
I have a complete backup so i'm not worried so much about the data.
What I'm most interested in is trying to solve this issue because I'd like to continue using boot camp and I actually work with mac computers and would like to be able to help others if this issue arrises again.

Can i just partition my HD by using boot camp 4.0.1 without install window?

Can i just partition my HD by using boot camp 4.0.1 without install windows?
cox i want to use rEFIt to boot up my pendrive to install windows.
Due to some reason the boot camp 4.0.1 cannnot detect my usb drive (that contained windows 7), so thats why i use the rEFIt to boot from my usb drive

Yes, you can.
Let the BootCamp Assistant just make the partition and do not click on "Install Windows"-button.
The result is a preformatted FAT32-partition on your Mac.
Stefan

I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

I installed windows 7 using Boot camp, Then i wanted to install the support software using boot camp and it always stops at 50% i tried installing the software using internet it always gives me error when i start installing it on windows, What to do?

What is the error? Are you following the Bootcamp instructions? Where on the "internet" are you trying to install from? Did you try downloading from here http://www.apple.com/support/bootcamp/downloads/?

I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 2011 MBP upgraded to Mavericks.

hello,
And thank you in advance.
I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 20011 MBP upgraded to OS X 10.9 Mavericks. Any ideas?
I've downloaded the Window support option software and the WindowSetupBox.exe and copied it to the USB drive. I tried to create an iso image from my Windows XP machine but recieved messages that Windows 8.1 could not run on XP. I've ordered the Windows 8.1 backup media.
Any way to proceed?
Thanks Tim

download the win 8 iso from here;
http://getintopc.com/softwares/operating-systems/download-windows-8-pro/
then start over. install on to your usb along with the support software.

Installer disk not found message during boot camp 5 and windows 8 install on late 2001 MBP running Mavericks?

I'm getting "Installer disk not found" message during boot camp 5 and windows 8 install on late 2001 MBP running Mavericks. Any ideas?
I've downloaded the Window support option software and the WindowSetupBox.exe and copied it to the USB drive.
Thanks Tim

You might have better luck in the Boot Camp community. I'll ask the hosts to relocate your post.
Boot Camp Community

Can I erase the boot camp partition and dual boot snow leopard and mountain lion instead

Can I erase the boot camp partition and dual boot snow leopard and mountain lion instead

Please don't double post. Look at your other thread.
If you want to get rid of Windows and the BC partition use the Boot Camp assistant program to remove the Win/BC partition. Don't do it manually with Disk Utility Use the BC A program.

How to update Boot Camp drivers when you already install Boot Camp?

The last time i install Windows 7 (Boot Camp) and drivers on my Mac was a bit long time ago, and i realise that there is some new drivers available for mine, so how can i update my Boot Camp drivers, please help me, and thanks!!!

I have MacBook Pro Retina w/Lion (of course), installed Win 7 Pro 64-bit, using Boot Camp procedures and files that were issued June 14. My BootCamp Assistant says it's 4.0.4.
My question is: how do I know when the Windows Support files (drivers) are updated by Apple? I would have expected an update by now, but I just went into Boot Camp Assistant on Lion, re-downloaded the drivers, and I *think* they are all dated June 14th still. (looked in WindowsSupport folder which is where it said it downloaded them)
There doesn't seem to be a reasonable way to get notified if there are new drivers or not.
My expectation was that I could run *something* either on the Windows or OS X side, and it would *tell me* that drivers needed updating, or at least say "you are running version X".
It can't be that I have to re-download the drivers and check the dates on all the files every time I'm curious if there's updates available. Can it?
The files seem to be on some mysterious Apple server and the only thing I can do to that server is ask to download the support files. No query, no "is an update available", ... ???
It's not even clear to me that the Windows Support files have a version number.

Is boot camp 5 and OS X 10.9 compatible with Windows 8

I recently bought the new iMac 27" (Late 2013) with following spec:
Intel I7 3.5 GHz
16 Gb RAM
3TB Fusion Drive
GTX 780M GPU (4G)
I have been trying to use boot camp 5 and install Windows 8 on it so I can run work programs on the new iMac.
Read through the Boot Camp 5 manual and follow it to the letter. Everything is normal until I hit the select partition to install Windows 8 screen (this is after rebooting using the windows 8 DVD).
Either one of the two scenario happened (I try this many times already):
There is no partition display at all (I mean nothing) and the only thing I can do is quite and reboot back to OS X.
or
All the partitions are display correctly (including the bootcamp one) but I can't continue with the installation because it's still in FAT32 format and i can't re-format it to NTFS.
I have being through the Genius Bar & Apple Tech support without any luck. I have been told by the guys at Genius Bar (who is not very helpful at all) that Windows 8 is not compatiable with OS X 10.9 .....but Apple tech support told be Yes it is.......
How do I install Windows 8 using Boot Camp 5 on new iMac (OS X 10.9)?
Thanks in advance!
defiantforce

I experienced the same quirk.
When you select the bootcamp partition to install Windows you get the message that it is not formated correctly. This is true, Bootcamp when creating the partition formats it as FAT. To fix, highlight the Bootcamp partition and click on Advance in the lower right hand corner. This will bring up a window with multiple options. Select Delete. This will now list the partition as unallocated. On the same screen in the lower right hand corner click on New. This will now display information on reallocating the space. It will be a little less because Windows needs a work area. Click on Apply.
You will now be able to continue with the install process. I was sucessuful in installing Windows 8 Pro and then upgrading it to Windows 8.1

Can i install bootcamp on the new iMac late 2012 "27"?

can i install bootcamp on the new iMac late 2012 "27" without fushion drive?

You have two possibilities:
1. Buy the USB SuperDrive and install Windows from a disc.
2. Use an USB drive with the Windows 7 installer inside.
Boot Camp isn't compatible with Windows 8, so you will have to wait. Also, the Late 2012 is only compatible with the 64-bit Windows 7 edition

Boot Camp ?'s and Can I install bootcamp w/ Windows 7 64-bit?

Similar Messages

Maybe you are looking for