Boot Hard Drive fills up in a few days - can't find any data
This is weird. OS X server 10.4.11 on a G5 Mac has been running fine as a file server for ages.
It has 3 drives. The boot disk is 120Gb.
The other 2 are 250Gb each.
The boot disk as nothing on it and is not shared but it was completely full. I couldn't find any large files on it or anything that would be filling it up. The sum of the folder sizes add up to less than 20Gb.
So I formatted completely and reinstalled everything. Within a week it was full again.
It seams to be filling up with hidden files.
What is going on ?
OK, when I show hidden files. I have found that the following files are growing right before my eyes...
System.log
mail.log
asl.log
log.smbd
Can I turn off logging. Any ideas ?
Similar Messages
-
Defrag my hard drive on my iMac now I tunes can't find my songs in the iTunes library
I defraged my hard drive now iTunes can't find the songs in the library. Not connected to the cloud yet. Any suggestions on getting iTunes to find the master copy of the songs so I can play them on my iMacs. I have the same songs on my I pad but I don't know of any way of transferring my music from my iPod to the iTunes library on my iMac. Any thoughts.
Same problem here. In my case I suspect due to having been cleaning out duplicate music files when hard disk was filling at an alarming rate (as I watched.) No longer doing that but my cleanup must have moved essential elements and files.
Anyone know how to get my purchased stuff, showing as purchased but with exclamation mark, back into itunes again? -
My hard drive crashed with no backup. How can I get the data from iCloud onto my Mac?
My hard drive went bad and needed to be replaced and I've lost everything that was on it (no backup - I know, I know...). Fortunately much of my data was backed up either on icloud or my ipad but I haven't been able to find any information about restoring it FROM icloud or ipad TO my Mac, only about how to restore to an ios device. I am running Lion. Thank you!
I guess what I meant to say was that I can log on to icloud to see my contacts, calendars, etc but is there a way to get that data onto my computer? In other words, how do I associate my new hard drive with my icloud account? I am probably not phrasing this properly - sorry. Three days ago (pre-crash) my desktop was configured to reflect my icloud info but I don't know how to make it do so again...does this make sense
-
I am having a tough time and searched, but have not found an answer that works. Last night I copied my iPhoto Library to an external hard drive because when I initially attempted to set up Photos, I got an error that said I needed 88 GB of space for the transfer. I got the iPhoto Library onto the hard drive and reopened the app and it prepared the library. It was talking forever, so I went to bed. This morning, I have this screen...
There are NO pictures in the actual app. I went to the external hard drive and see that the Photos Library exists...
I have tried to hold command and option and restart Photos and I did get a prompt that it was repairing; however, this was unsuccessful. Please help! I know the photos are there because when I show package contents, I see them all in my Masters/Old Masters folders.
Thank you!Agree with baltwo, though even if you have saved the install app I wouldn't use it unless its been used to install a known good copy of the OS already.
In your case, that probably means start fresh:
Restart the computer, holding down 'command' and 'r'. When the recovery disk window shows, choose 'Reinstall Mac OS X'. -
I am using a 2011 iMac on 10.6.8. I recently downloaded the Yosemite upgrade and during the installation process ran into the "this disk is used for time machine backups". I ejected the external drive I use for time machine backups and turned off time machine in the application. I then followed the instructions of the help article (OS X: Cannot install on a volume used by Time Machine for backups - Apple Support) by moving the folder "Backups.backupdb" that I was able to find on my internal hard drive to the trash. I have restarted several times after completing this process. I am still running into the same error during the installation process. I have searched the hard drive for any other backups and I cannot find any. I searched the hard drive using the command cmd-shift-g and searched for “backups.backupdb” and was unable to find any folders or files. Any other suggestions?
I have resolved the problem - I did not actually delete the "backups.backupdb" folder, I only deleted the contents of the folder. I must have only searched on the user account for the folder after I thought I had deleted it. Thank you for the assistance everyone and I apologize for the inconvenience!
-
I need to replace the hard drive in my HP Pavilion dv6405, where can I find a replacement?
I was given this computer, first I had to contact your board to unlock because I had no password for Power on, I got it unlocked with your help, and I thank you for your help, but the hard drive must have failed because it says there is no hard drive. Do you know where I could get a replacement for it? Or is it even worth fixing?
Hi:
First run the hard drive diagnostics found in the BIOS to see what it reports.
If it also reports no hard drive found or reports errors with the disk, the hard drive is probably dead.
I had posted the link to the service manual on your other question regarding the password.
I highly recommend you open the hard drive bay and see if there is a hard drive in there now.
If there isn't, you will not only need a new hard drive, but also the caddy which it needs to be connected to the PC's motherboard.
If the notebook has a hard drive, then you can get any SATA II notebook hard drive. I would not go beyond 320 GB for that model.
This site has hard drives at very reasonable prices.
http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Drives
Then you just remove the caddy from the old hard drive and transfer it to the new one.
You will also need recovery disks to install the operating system and programs that shipped with the PC.
Please read the info at the link below on how to order recovery disks.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=bph07143#N76
If HP no longer has them for your model, then you can order them from this non-HP vendor. You will need to know if the model is a dv6405us or dv6405ca.
http://www.computersurgeons.com/SearchProducts.aspx
If you discover your PC does not have a hard drive or caddy, it would be best if you ordered a drive from HP (one of the ones listed in chapter 3 of the service manual). I believe they come with the caddy.
Paul -
How can I use my Time Capsule as an external Hard Drive for my PC? My PC can't find it.
Hi, I just bought this Time Capsule for my home. I've got the internet access for all my devices (Mac, iPad, PC, iPhone) and I've got the Mac backup working through Time Machine. I'm supposed to be able to use the Time Capsule as an external drive for my PC, but I can't figure it out. My PC doesn't recognize the Time Capsule as a Network Place. I called AppleCare, but they don't have all the answers for "PC issues." They tried to get me to Map a Network Drive, but my PC popped up a window asking for a Username and Password. It looks like something similar to when I VPN into my company network from home.
I'm using Windows XP Professional, Version 2002, Service Pack 3.
Any help would be appreciated.
Thanks!Download and install the airport utility for windows.. it isn't strictly necessary but the bonjour service makes life easier.
The request for username and password is correct. Username is whatever you like.. but windows needs it.. so admin.. being the common router one.. password by default is public unless you changed it.
Now to get the TC to work properly..
1. The names should be SMB compliant.. by default they are wrong.. use short names, no spaces no special characters.. pure alphanumeric. That is for TC name and wireless names.
2. Wireless passwords should also be same use WPA2 private.
3. In the disk sharing page.. manual setup.. put in the windows workgroup name.. ie WORKGROUP.. this helps the discovery process.
4. In the same area, turn on the guest account to read and write.. not necessary but helps with later versions of windows particularly.
5. Access the drive by using the direct IP address. ie in Windows Explorer address bar, \\10.0.1.1 (or whatever IP the TC is at). -
my macbook 15 inch wont turn on, it makes the hard drive sound and then a few seconds later it sounds like its powering down with like a clicking noise
Try Resetting your Mac's PRAM and NVRAM
If that doesn't help, try Resetting the System Management Controller (SMC)
If neither helped, boot from your install disc, run Disk Utillity. The startup disk may need repairing.
Using Disk Utility to verify or repair disks
Check the S.M.A.R.T. status at the bottom of the Disk Utility window.
Make sure it says: Verified -
How to make a boot hard drive clone
I would like to make a clone of my 09 Mac Pro Quad 2.93, Snow Leopard boot hard drive. The idea is to install and boot from the clone in the event of a boot drive failure. Can this be done?
You can put the clone on any drive that you find suitable. If you use an internal drive it may be convenient to use backup software to update your clone so it remains a duplicate of your startup drive. This has the added benefit of acting as a backup. Suitable backup software might be:
Backup Software Recommendations
Carbon Copy Cloner
Data Backup
Deja Vu
SuperDuper!
Synk Pro
Tri-Backup
Others may be found at VersionTracker or MacUpdate.
Visit The XLab FAQs and read the FAQ on backup and restore. Also read How to Back Up and Restore Your Files. -
Why is my macbook pro 500gb hard drive filled up when I have only 1,000 songs and two home movies
i have a macbook pro with a 500 gb hard drive. there is only about 20 gb left open. i have about 1,000 songs and a couple of home movies that are about 30 min. in length. how can i find out what is on my hard drive that is taking up so much space?
Find out what's taking space on your Mac hard drive
Mac 101: Six steps for tracking down hard drive space hogs
Freeing Up Hard Disk Space
Freeing space on your Mac OS X startup disk -
I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????
Prep your new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU and return to the installer. Install OS X. -
I have a late 2005 power PC G5 that I want to bring back to life. I need to replace the original hard drive, a Maxtor 250 GB Sata. Can I replace it with modern drives, SATA 5-6 etc?
I knew I should never get rid of my old G5's. By the way, there is a browser still supported for the PPC, TenFourFox, if you're not using it already. Go to the Floodgap website (they author it) download it for free. The only thing it doesn't support is the Flash plugin, but the browser works great. Other video types are supported. It's based on Firefox, and runs most of the plugins and add-ons. It's very fast, and beats all other browsers on the browser compatibility and speed test. That's now my default on my G5's. Firefox and Safari are no longer supported. As far as the OS, both Tiger and Leopard were solid for me. The reason, as I stated before, was iMovie. The version in Tiger with iLife was far superior to what Apple changed it to. They 'dumbed it down' for the masses. Even the newest iLife 11 on my Mac Pro quad isn't is good, in my opinion. So Leopard should be fine for you. It's a much larger browser in terms of sheer megabytes and disk space, but it's fine. As far as getting an OS disc, I'm seeing Tiger for about $45.00, Leopard for $50 - 60.00 on that famous auction site. As far as RAM, I have 8GB in my G5 2.3, but you should check Activity Monitor when you are running your apps. See how much green slice you have left (unused RAM). You might find you don't need eight. A Mac Pro will grab more free RAM than a PPC machine will. I have a hard time maxing out use of my 8 on the PPC. Not true with the eight on my Mac Pro. The OS doesn't hesitate to grab and use it. You might be OK with 6GB on your PPC. More will not make you faster, as long as you still have free RAM available. As far as backup on your resurrected machine: look for a firewire enabled backup if can. Use CCC (Carbon Copy Cloner) and make a clone backup. Next time your PPC machine wipes out the hard drive, just take your Firewire drive and plug it into another PPC machine, and you can select it as your boot drive. You'll be back and running in five minutes. You can also take the physical drive out of your enclosure, and put it in your tower to replace the failed drive, and you'll be back to where you were in less than ten minutes, OS and all. The PowerMac has an 800 port, so you can do the 800 on the machine to an 800 port on your backup. A firewire 800 to 800 cable is only about $8.00. It runs nice and fast through the 800 port. I like the OWC Mercury Extreme enclosures. They use USB, Firewire 800, and eSATA, so all your options are open.
-
Since i upgraded to mavericks,my external hard drive lost half of the files ,how can i get them back?
Type move itunes library into the google serach bar.
It has always been very basic to always maintain abackup copy of your computer. Do you not have a backup copy? -
I am trying to edit my website which, was composed on iweb about 2 years ago. I have the website stored on my hard drive. When I open iweb, I can't figure out how to load the website into iweb for editing purposes. Any help would be greatly appreciated! Thanks
You need to migrate to a modern, supported webpage development application and leave iWeb behind. It hasn't been supported for 2 years now and was behind the curve feature wise when it was dropped by Apple.
One app that many have migrated to because it is very similar to iWeb in the GUI and features is Everweb. It has a demo version that you can try. Text and photos from you current published site can be copied and pasted into Everweb to help the migration over.
There are other possible candidates. Just search the iWeb forum for "iWeb alternative" or "iWeb replacement" to get a list of topics discussing them. -
I keep my iTunes library on an external hard drive 4TB. It's full. Can I use more than one hard drive to keep my library on? Like two 4TB next to each other.
Create a concatenated disk set
Increase storage space with a concatenated RAID set (also called “Just a Bunch of Disks” or JBOD). If you need one large disk, but you have only several smaller disks, you can create a concatenated disk set to use several small disks as one large disk.
Open Disk Utility, in the Utilities folder in Launchpad.
Select one of the disks that you want in the set, and then click RAID.
Click Add (+), and type a name for the RAID set.
Choose a format from the Format pop-up menu. Usually you’ll choose the Mac OS Extended (Journaled) format.
Choose Concatenated Disk Set from the RAID Type pop-up menu.
Drag the disks you want to add to the set to the list on the right.
Click Create.
Exerpt from:
Disk Utility 12.x: Create a RAID set - Apple - Support
Note that the biggest CON to concatenated RAID configurations is vulnerability to volume failure. If either disk fails, the whole volume fails. If you choose this option, I would highly recommend backing up your music to a cloud service. There are very cheap per GB/storage, and some of the most reputable actually offer unlimited storage:
Five Best Cloud Storage Providers - Lifehacker
Maybe you are looking for
-
How do I copy my old xl files from my XP machine to operate on xl for Mac on my new iMac. When I copy them onto a stick and transfer them it automatically makes them xls files which are then corrupted when I try to open them in xl for mac
-
Where to shoot in Death Valley
So I'm going down to Death Valley next week. I've got my stockpile of Fuji Velvia 50 ready to rock - but I'm looking for suggestions on sunset and sunrise locations. Any Death Valley vets have some input on where to shoot? My Photos
-
does anybody know when apple will add hebrew support for the ipod? I don't wanna use the 3rd person software since apple won't support it in case of a problem, meaning no warrenty.
-
Hello I am using Weblogic 6.1 on os from HP. I have a hyperlink which allows downloading .xls file. Following is the code... <% out.println("<a href=\"RTAList.xls\">Download</a>"); %> Above link is working very fine on Weblogic 6.1 on Windows 2000 Se
-
How to close open apps from bottom of screen on ISO 7 when you double tap start button