Boot stack AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized

Boot stack with last message on verbrows AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
I tried to restore OSX from the Recovery System Utility but it did not help
log:
Jan 12 08:26:31 localhost bootlog[0]: BOOT_TIME 1421079991 0
Jan 12 08:26:39 localhost syslogd[121]: Configuration Notice:
        ASL Module "com.apple.authd" sharing output destination "/var/log/asl" with ASL Module "com.apple.asl".
        Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
Jan 12 08:26:39 localhost syslogd[121]: Configuration Notice:
        ASL Module "com.apple.authd" sharing output destination "/var/log/system.log" with ASL Module "com.apple.asl".
        Output parameters from ASL Module "com.apple.asl" override any specified in ASL Module "com.apple.authd".
Jan 12 08:26:39 localhost syslogd[121]: Configuration Notice:
        ASL Module "com.apple.authd" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
Jan 12 08:26:39 localhost syslogd[121]: Configuration Notice:
        ASL Module "com.apple.install" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
Jan 12 08:26:39 localhost syslogd[121]: Configuration Notice:
        ASL Module "com.apple.iokit.power" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
Jan 12 08:26:39 localhost syslogd[121]: Configuration Notice:
        ASL Module "com.apple.securityd" claims selected messages.
        Those messages may not appear in standard system log files or in the ASL database.
Jan 12 08:26:39 --- last message repeated 6 times ---
Jan 12 08:26:39 localhost kernel[0]: Longterm timer threshold: 1000 ms
Jan 12 08:26:39 localhost kernel[0]: PMAP: PCID enabled
Jan 12 08:26:39 localhost kernel[0]: PMAP: Supervisor Mode Execute Protection enabled
Jan 12 08:26:39 localhost kernel[0]: Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Jan 12 08:26:39 localhost kernel[0]: vm_page_bootstrap: 3893498 free pages and 268038 wired pages
Jan 12 08:26:39 localhost kernel[0]: kext submap [0xffffff7f80a00000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000a00000]
Jan 12 08:26:39 localhost kernel[0]: zone leak detection enabled
Jan 12 08:26:39 localhost kernel[0]: "vm_compressor_mode" is 4
Jan 12 08:26:39 localhost kernel[0]: multiq scheduler config: deep-drain 0, urgent first 1, depth limit 4, band limit 127, sanity check 0
Jan 12 08:26:39 localhost kernel[0]: standard timeslicing quantum is 10000 us
Jan 12 08:26:39 localhost kernel[0]: standard background quantum is 2500 us
Jan 12 08:26:39 localhost kernel[0]: mig_table_max_displ = 13
Jan 12 08:26:39 localhost kernel[0]: TSC Deadline Timer supported and enabled
Jan 12 08:26:39 localhost kernel[0]: [IOBluetoothHCIController][start] -- completed
Jan 12 08:26:39 localhost kernel[0]: AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
Jan 12 08:26:39 localhost kernel[0]: AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
Jan 12 08:26:39 localhost kernel[0]: AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
Jan 12 08:26:39 localhost kernel[0]: AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
Jan 12 08:26:39 localhost kernel[0]: AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
Jan 12 08:26:39 localhost kernel[0]: AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
Jan 12 08:26:39 localhost kernel[0]: AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
Jan 12 08:26:39 localhost kernel[0]: AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
Jan 12 08:26:39 localhost kernel[0]: calling mpo_policy_init for AMFI
Jan 12 08:26:39 localhost kernel[0]: Security policy loaded: Apple Mobile File Integrity (AMFI)
Jan 12 08:26:39 localhost kernel[0]: calling mpo_policy_init for Sandbox
Jan 12 08:26:39 localhost kernel[0]: Security policy loaded: Seatbelt sandbox policy (Sandbox)
Jan 12 08:26:39 localhost kernel[0]: calling mpo_policy_init for TMSafetyNet
Jan 12 08:26:39 localhost kernel[0]: Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Jan 12 08:26:39 localhost kernel[0]: calling mpo_policy_init for Quarantine
Jan 12 08:26:39 localhost kernel[0]: Security policy loaded: Quarantine policy (Quarantine)
Jan 12 08:26:39 localhost kernel[0]: Copyright (c) 1982, 1986, 1989, 1991, 1993
Jan 12 08:26:39 localhost kernel[0]: The Regents of the University of California. All rights reserved.
Jan 12 08:26:39 localhost kernel[0]: MAC Framework successfully initialized
Jan 12 08:26:39 localhost kernel[0]: using 16384 buffer headers and 10240 cluster IO buffer headers
Jan 12 08:26:39 localhost kernel[0]: AppleKeyStore starting (BUILT: Sep 19 2014 00:11:30)
Jan 12 08:26:39 localhost kernel[0]: IOAPIC: Version 0x20 Vectors 64:87
Jan 12 08:26:39 localhost kernel[0]: ACPI: sleep states S3 S4 S5
Jan 12 08:26:39 localhost kernel[0]: pci (build 00:11:20 Sep 19 2014), flags 0xe3000, pfm64 (39 cpu) 0x7f80000000, 0x80000000
Jan 12 08:26:39 localhost kernel[0]: [ PCI configuration begin ]
Jan 12 08:26:39 localhost kernel[0]: console relocated to 0x7f80020000
Jan 12 08:26:39 localhost kernel[0]: [ PCI configuration end, bridges 13, devices 14 ]
Jan 12 08:26:39 localhost kernel[0]: AppleThunderboltNHIType2::setupPowerSavings - GPE based runtime power management
Jan 12 08:26:39 localhost kernel[0]: SATA WARNING: IDENTIFY DEVICE checksum not implemented.
Jan 12 08:26:39 localhost kernel[0]: mcache: 8 CPU(s), 64 bytes CPU cache line size
Jan 12 08:26:39 localhost kernel[0]: mbinit: done [128 MB total pool size, (85/42) split]
Jan 12 08:26:39 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless kmod start
Jan 12 08:26:39 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib kmod start
Jan 12 08:26:39 localhost kernel[0]: com.apple.AppleFSCompressionTypeDataless load succeeded
Jan 12 08:26:39 localhost kernel[0]: com.apple.AppleFSCompressionTypeZlib load succeeded
Jan 12 08:26:39 localhost kernel[0]: IOHDIXController: NOTE: administrator is creating non-ejectable disk image
Jan 12 08:26:39 localhost kernel[0]: rooting via boot-uuid from /chosen: 4AA42E36-8951-3022-A0BE-196BF12C7249
Jan 12 08:26:39 localhost kernel[0]: Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
Jan 12 08:26:39 localhost kernel[0]: Got boot device = IOService:/IOResources/IOHDIXController/ramfile://487175853@0/KDIRAMBackingStore/KDIUDIFEncoding/KDIUDIFDiskImage/KDIDiskImageNub/IOHDIXHDDriveInKernel/IODiskImageBlockStorageDeviceInKernel/IOBlockStorageDriver/Apple disk image Media/IOApplePartitionScheme/disk image@2
Jan 12 08:26:39 localhost kernel[0]: BSD root: disk1s2, major 1, minor 6
Jan 12 08:26:39 localhost kernel[0]: CoreStorage: fsck_cs has finished for group "23073208-1325-4DC1-9EF3-1E623AEC5FDA" with status 0x00
Jan 12 08:26:39 localhost kernel[0]: hfs: mounted OS X Base System on device root_device
Jan 12 08:26:39 localhost kernel[0]: XCPM: registered
Jan 12 08:26:39 localhost kernel[0]: ARPT: 1.318184: srom rev:11
Jan 12 08:26:39 localhost kernel[0]: VM Swap Subsystem is ON
Jan 12 08:26:39 localhost kernel[0]: ARPT: 1.327278: BTCOEXIST off
Jan 12 08:26:39 localhost kernel[0]: ARPT: 1.327548: BRCM tunables:
Jan 12 08:26:39 localhost kernel[0]: ARPT: 1.327552:   pullmode[1] txringsize[ 256] txsendqsize[1024] reapmin[   32] reapcount[ 128]
Jan 12 08:26:39 localhost kernel[0]: ARPT: 1.328143: wl0: Broadcom BCM43a0, vendorID[0x14e4] BAR0[0xc1a00004]
Jan 12 08:26:39 localhost kernel[0]: 7.15.124.12 (r497602)
Jan 12 08:26:39 localhost kernel[0]: CoreStorageFamily::unlockVEKs(C44C0299-0F28-40CE-8658-7C6CF86BB29B) VEK unwrap failed. this is normal, except for the root volume.
Jan 12 08:26:39 localhost kernel[0]: USBMSC Identifier (non-unique): 000000000820 0x5ac 0x8406 0x820, 3
Jan 12 08:26:39 localhost kernel[0]: AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized
Jan 12 08:26:39 localhost kernel[0]: hfs: mounted untitled on device disk2
Jan 12 08:26:39 localhost kernel[0]: hfs: mounted untitled on device disk3
Jan 12 08:26:39 localhost kernel[0]: hfs: mounted untitled on device disk4
Jan 12 08:26:39 localhost kernel[0]: hfs: mounted untitled on device disk5
Jan 12 08:26:39 localhost kernel[0]: hfs: mounted untitled on device disk6
Jan 12 08:26:39 localhost kernel[0]: hfs: mounted untitled on device disk7
Jan 12 08:26:39 localhost kernel[0]: hfs: mounted untitled on device disk8
Jan 12 08:26:39 localhost kernel[0]: hfs: mounted untitled on device disk9
Jan 12 08:26:39 localhost kernel[0]: hfs: mounted untitled on device disk10
Jan 12 08:26:39 localhost kernel[0]: hfs: mounted untitled on device disk11
Jan 12 08:26:38 localhost iconservicesagent[119]: iconservicesagent launched.
Jan 12 08:26:39 localhost kernel[0]: hfs: mounted untitled on device disk12
Jan 12 08:26:39 localhost kernel[0]: hfs: mounted untitled on device disk13
Jan 12 08:26:39 localhost kernel[0]: hfs: mounted untitled on device disk14
Jan 12 08:26:38 localhost hidd[134]: void __IOHIDPlugInLoadBundles(): Loaded 0 HID plugins
Jan 12 08:26:38 localhost hidd[134]: IOHIDService compatibility thread running at priority 63 and schedule 2.
Jan 12 08:26:39 localhost iconservicesd[118]: iconservicesd launched.
Jan 12 08:26:39 localhost distnoted[137]: # distnote server daemon absolute time: 9.151074493   civil time: Mon Jan 12 08:26:38 2015   pid: 137 uid: 241 root: yes
Jan 12 08:26:39 localhost iconservicesd[118]: Cache path: /Library/Caches/com.apple.iconservices.store
Jan 12 08:26:40 localhost com.apple.SecurityServer[127]: Session 100000 created
Jan 12 08:26:40 localhost hidd[134]: ____IOHIDSessionScheduleAsync_block_invoke: thread_id=0x107863000
Jan 12 08:26:40 localhost hidd[134]: HID Session async scheduling initiated.
Jan 12 08:26:40 localhost hidd[134]: HID Session async root queue running at priority 63 and schedule 2.
Jan 12 08:26:40 localhost hidd[134]: HID Session async scheduling complete.
Jan 12 08:26:40 localhost hidd[134]: Successfully opened the IOHIDSession
Jan 12 08:26:41 localhost com.apple.SecurityServer[127]: Entering service
Jan 12 08:26:42 localhost authd[142]: Warning mechanism not found on disk PKINITMechanism:auth,privileged during import of authenticate
Jan 12 08:26:42 localhost authd[142]: Warning mechanism not found on disk RestartAuthorization:restart during import of system.restart
Jan 12 08:26:42 localhost authd[142]: Warning mechanism not found on disk RestartAuthorization:success during import of system.restart
Jan 12 08:26:42 localhost authd[142]: Warning mechanism not found on disk loginwindow:login during import of system.login.fus
Jan 12 08:26:42 localhost authd[142]: Warning mechanism not found on disk loginwindow:success during import of system.login.fus
Jan 12 08:26:42 localhost authd[142]: Warning mechanism not found on disk loginwindow:done during import of system.login.fus
Jan 12 08:26:42 localhost authd[142]: Warning mechanism not found on disk loginwindow:login during import of system.login.console
Jan 12 08:26:42 localhost authd[142]: Warning mechanism not found on disk PKINITMechanism:auth,privileged during import of system.login.console
Jan 12 08:26:42 localhost authd[142]: Warning mechanism not found on disk loginwindow:success during import of system.login.console
Jan 12 08:26:42 localhost authd[142]: Warning mechanism not found on disk HomeDirMechanism:login,privileged during import of system.login.console
Jan 12 08:26:42 localhost authd[142]: Warning mechanism not found on disk HomeDirMechanism:status during import of system.login.console
Jan 12 08:26:42 localhost authd[142]: Warning mechanism not found on disk MCXMechanism:login during import of system.login.console
Jan 12 08:26:42 localhost authd[142]: Warning mechanism not found on disk loginwindow:done during import of system.login.console
Jan 12 08:26:42 localhost authd[142]: Warning mechanism not found on disk KerberosAgent:kerberos-dialog during import of com.apple.KerberosAgent
Jan 12 08:26:42 localhost authd[142]: Warning mechanism not found on disk KerberosAgent:kerberos-authenticate,privileged during import of com.apple.KerberosAgent
Jan 12 08:26:42 localhost authd[142]: Warning mechanism not found on disk RestartAuthorization:shutdown during import of system.shutdown
Jan 12 08:26:42 localhost authd[142]: Warning mechanism not found on disk RestartAuthorization:success during import of system.shutdown
Jan 12 08:26:43 localhost iconservicesagent[119]: Starting service with cache path: /var/folders/zz/zyxvpxvq6csfxvn_n0000000000000/C/com.apple.iconservices
Jan 12 08:26:43 localhost sandboxd[228]: iconservicesd(118) deny file-write-create /Library/Caches
Jan 12 08:26:44 localhost discoveryd[124]: Basic Sockets GetProcessNameFromSocket() failed errno[57] err[-1]
Jan 12 08:26:44 localhost discoveryd[124]: Basic Sockets Unknown(-1), errno 0 UDS FD=3
Jan 12 08:26:44 localhost discoveryd[124]: Basic Sockets UDS FD=3 ERROR: failed to get effective user ID, errno 0
Jan 12 08:26:44 localhost discoveryd[124]: Basic SleepProxy BSP Server Disabled. Metric = 3373
Jan 12 08:26:44 localhost discoveryd[124]: Basic WABServer NetResolverEvent no resolvers, resetting domains
Jan 12 08:26:44 localhost discoveryd[124]: Basic DNSResolver etc/hosts file changed: Event 0x7f7ffba02830 Flushed /etc/hosts cache
Jan 12 08:26:44 localhost discoveryd[124]: Basic RemoteControl com.apple.discoveryd Starting XPC Server
Jan 12 08:26:44 localhost discoveryd[124]: Basic SleepProxy Could not get the primary interface
Jan 12 08:26:44 localhost discoveryd[124]: Basic RemoteControl com.apple.discoveryd.dnsproxy Starting XPC Server
Jan 12 08:26:44 localhost discoveryd_helper[230]: Basic RemoteControl com.apple.discoveryd_helper Starting XPC Server
Jan 12 08:26:44 localhost discoveryd_helper[230]: Detailed RemoteControl com.apple.discoveryd_helper XPC connection 0x7fb6d9600260: start (pid=124, <unknown> not root)
Jan 12 08:26:44 localhost Apple80211 framework[117]: CWIsInstallEnvironment: COREWLAN: executing in install environment
Jan 12 08:26:44 localhost networkd[231]: networkd-411 pid 231
Jan 12 08:26:44 localhost lsregister[229]: LaunchServices: Begin database seeding
Jan 12 08:26:44 localhost discoveryd[124]: Basic SleepProxy Sleep Proxy Server is not enabled
Jan 12 08:26:44 localhost findmydeviced[116]: findmydeviced has been launched
Jan 12 08:26:45 localhost apsd[125]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102)
Jan 12 08:26:45 localhost apsd[125]: ### Error:-14071 File:/SourceCache/Admin/Admin-618/DSNode.m Line:660
Jan 12 08:26:45 localhost locationd[128]: Logging binary sensor data to /var/folders/zz/zyxvpxvq6csfxvn_n00000sm00006d/C/locationdSensors.bin
Jan 12 08:26:45 localhost locationd[128]: NBB-Could not get UDID for stable refill timing, falling back on random
Jan 12 08:26:45 localhost locationd[128]: Location icon should now be in state 'Inactive'
Jan 12 08:26:45 localhost iconservicesd[118]: Error creating cache folder at path: /Library/Caches/com.apple.iconservices.store with error: Error Domain=NSCocoaErrorDomain Code=513 "You don?~@~Yt have permission to save the file ?~@~\com.apple.iconservices.store?~@~] in the folder ?~@~\Caches?~@~]." UserInfo=0x7fb8bca00c10 {NSFilePath=/Library/Caches/com.apple.iconservices.store, NSUnderlyingError=0x7fb8bca006c0 "The operation couldn?~@~Yt be completed. Operation not permitted"}
Jan 12 08:26:45 localhost apsd[125]: Certificate not yet generated
Jan 12 08:26:45 localhost apsd[125]: <APSCertificateManager: 0x7f8c0ad3c8f0>: Certificate does not exist
Jan 12 08:26:45 localhost apsd[125]: Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Jan 12 08:26:45 localhost apsd[125]: Deleted keychain /Library/Keychains/apsd.keychain
Jan 12 08:26:46 localhost sandboxd[228]: apsd(125) deny file-issue-extension /private/var/root/Library/Caches/com.apple.aps.framework
Jan 12 08:26:46 localhost apsd[125]: Failed to obtain sandbox extension for path=/var/root/Library/Caches/com.apple.aps.framework. Errno:1
Jan 12 08:26:46 localhost sandboxd[228]: apsd(125) deny file-issue-extension /private/var/root/Library/Caches/com.apple.aps.framework
Jan 12 08:26:46 localhost apsd[125]: Failed to obtain sandbox extension for path=/var/root/Library/Caches/com.apple.aps.framework. Errno:1
Jan 12 08:26:46 localhost apsd[125]: Certificate not yet generated
Jan 12 08:26:46 localhost webfilterctl[122]: Failed to write content filter preferences
Jan 12 08:26:46 localhost kernel[0]: IOGraphics flags 0x43
Jan 12 08:26:47 localhost kernel[0]: AppleCamIn::init
Jan 12 08:26:47 localhost kernel[0]: AppleCamIn::probe
Jan 12 08:26:47 localhost kernel[0]: AppleCamIn::start
Jan 12 08:26:47 localhost kernel[0]: virtual bool AppleCamIn::start(IOService *): about to configure DDR
Jan 12 08:26:47 localhost kernel[0]: AppleCamIn::start - S2 DDR Frequency set to 450 MHz (default)
Jan 12 08:26:47 localhost kernel[0]: AGC: 3.7.21, HW version=4.0.8 [3.2.8], flags:0, features:20600
Jan 12 08:26:47 localhost kernel[0]: save_ddr_phy_regs: saving 127 DDR PHY shmoo-calibrated registers
Jan 12 08:26:47 localhost kernel[0]: **** [IOBluetoothHostControllerUSBTransport][start] -- completed -- result = TRUE -- 0x3000 ****
Jan 12 08:26:47 localhost kernel[0]: **** [BroadcomBluetoothHostControllerUSBTransport][start] -- Completed -- 0x3000 ****
Jan 12 08:26:47 localhost kernel[0]: [IOBluetoothHCIController][staticBluetoothTransportShowsUp] -- Received Bluetooth Controller register service notification -- 0x3000
Jan 12 08:26:47 localhost kernel[0]: NVDAStartup: Official
Jan 12 08:26:47 localhost kernel[0]: Previous shutdown cause: 3
Jan 12 08:26:47 localhost kernel[0]: hmm.. mismatch sizes: 3100 vs 20
Jan 12 08:26:47 localhost kernel[0]: IOPPF - IODeviceTree:/efi/platform/StartupPowerEvents: 0x0
Jan 12 08:26:48 localhost kernel[0]: NVDAGK100HAL loaded and registered
Jan 12 08:26:48 localhost kernel[0]: [IOBluetoothHCIController::setConfigState] calling registerService
Jan 12 08:26:48 localhost kernel[0]: **** [IOBluetoothHCIController][ProcessBluetoothTransportShowsUpActionWL] -- Connected to the transport successfully -- 0x3800 -- 0x6000 -- 0x3000 ****
Jan 12 08:26:48 localhost sandboxd[228]: apsd(125) deny file-write-create /Library/Preferences/.TemporaryItems
Jan 12 08:26:48 localhost sandboxd[228]: apsd(125) deny file-write-create /Library/Preferences/com.apple.apsd.launchd.sb-caa30002-6NXeLB
Jan 12 08:26:48 localhost blued[130]: Release the WiFi lock
Jan 12 08:26:48 localhost blued[130]: HID Page timeout 2710
Jan 12 08:26:48 localhost sandboxd[228]: blued(130) deny mach-lookup com.apple.coreservices.quarantine-resolver
Jan 12 08:26:49 localhost kernel[0]: IOPPF: XCPM mode
Jan 12 08:26:49 localhost kernel[0]: X86PlatformShim::sendPStates - Success!
Jan 12 08:26:49 --- last message repeated 7 times ---
Jan 12 08:26:49 localhost blued[130]: hciControllerOnline; HID devices? 0
Jan 12 08:26:49 localhost blued[130]: hostControllerOnline - Number of Paired devices = 0, List of Paired devices = (null)
Jan 12 08:26:49 localhost kernel[0]: fGPUIdleIntervalMS = 0
Jan 12 08:26:49 localhost kernel[0]: DSMOS has arrived
Jan 12 08:26:49 localhost kernel[0]: AppleCamIn::start - link control offset in PCI bridge = 0x50
Jan 12 08:26:49 localhost kernel[0]: AppleCamIn::start - pmcsr offset in PCI bridge = 0xa4
Jan 12 08:26:49 localhost kernel[0]: AppleCamIn::power_off_hardware
Jan 12 08:26:49 localhost security[373]: Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Jan 12 08:26:49 localhost security[375]: Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Jan 12 08:26:49 localhost kernel[0]: AppleCamIn::initForPM
Jan 12 08:26:49 localhost kernel[0]: AppleCamIn::systemWakeCall - messageType = 0xE0000340
Jan 12 08:26:49 localhost com.apple.SecurityServer[127]: Failed to unlock iCloud keychain for uid -1
Jan 12 08:26:49 localhost kernel[0]: IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
Jan 12 08:26:49 localhost kernel[0]: IO80211Interface::efiNVRAMPublished():
Jan 12 08:26:49 localhost kernel[0]: bpfAttach len 64 dlt 12
Jan 12 08:26:49 localhost kernel[0]: en1: promiscuous mode enable succeeded
Jan 12 08:26:49 localhost kernel[0]: en2: promiscuous mode enable succeeded
Jan 12 08:26:49 localhost kernel[0]: AirPort: Link Down on en0. Reason 8 (Disassociated because station leaving).
Jan 12 08:26:49 localhost kernel[0]: en0::IO80211Interface::postMessage bssid changed
Jan 12 08:26:49 localhost kernel[0]: bpfAttach len 94 dlt 163
Jan 12 08:26:49 localhost kernel[0]: bpfAttach len 30 dlt 105
Jan 12 08:26:49 localhost kernel[0]: bpfAttach len 52 dlt 127
Jan 12 08:26:49 localhost kernel[0]: bpfAttach len 38 dlt 192
Jan 12 08:26:49 localhost discoveryd[124]: WCFNameResolvesToAddr: called
Jan 12 08:26:49 localhost discoveryd[124]: WCFNameResolvesToAddr: entering
Jan 12 08:26:49 localhost discoveryd[124]: WCFNameResolvesToAddr: called
Jan 12 08:26:49 localhost discoveryd[124]: WCFNameResolvesToAddr: entering
Jan 12 08:26:49 localhost discoveryd[124]: WCFNameResolvesToAddr: called
Jan 12 08:26:49 localhost discoveryd[124]: WCFNameResolvesToAddr: entering
Jan 12 08:26:49 localhost airportd[117]: airportdProcessDLILEvent: en0 attached (down)
Jan 12 08:26:50 localhost discoveryd[124]: WCFNameResolvesToAddr: called
Jan 12 08:26:50 localhost discoveryd[124]: WCFNameResolvesToAddr: entering
Jan 12 08:26:50 localhost discoveryd[124]: WCFNameResolvesToAddr: called
Jan 12 08:26:50 localhost discoveryd[124]: WCFNameResolvesToAddr: entering
Jan 12 08:26:50 localhost discoveryd[124]: WCFNameResolvesToAddr: called
Jan 12 08:26:50 localhost discoveryd[124]: WCFNameResolvesToAddr: entering
Jan 12 08:26:50 localhost discoveryd[124]: WCFNameResolvesToAddr: called
Jan 12 08:26:50 localhost discoveryd[124]: WCFNameResolvesToAddr: entering
Jan 12 08:26:50 localhost WindowServer[383]: Server is starting up
Jan 12 08:26:50 localhost WindowServer[383]: Session 257 retained (2 references)
Jan 12 08:26:50 localhost WindowServer[383]: Session 257 released (1 references)
Jan 12 08:26:50 localhost WindowServer[383]: Session 257 retained (2 references)
Jan 12 08:26:50 localhost WindowServer[383]: init_page_flip: page flip mode is on
Jan 12 08:26:51 localhost kernel[0]: en0: 802.11d country code set to 'HU'.
Jan 12 08:26:51 localhost kernel[0]: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161 165
Jan 12 08:26:51 localhost kernel[0]: en0: 802.11d country code set to 'X3'.
Jan 12 08:26:51 localhost kernel[0]: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 100 104 108 112 116 120 124 128 132 136 140 149 153 157 161
Jan 12 08:26:51 localhost WindowServer[383]: Found 1 modes for display 0x00000000 [1, 0]
Jan 12 08:26:51 localhost WindowServer[383]: displayonline
Jan 12 08:26:51 localhost WindowServer[383]: Found 23 modes for display 0x00000000 [23, 0]
Jan 12 08:26:51 localhost WindowServer[383]: Found 1 modes for display 0x00000000 [1, 0]
Jan 12 08:26:51 --- last message repeated 2 times ---
Jan 12 08:26:51 localhost WindowServer[383]: mux_initialize: Mode is dynamic
Jan 12 08:26:51 localhost WindowServer[383]: Found 23 modes for display 0x00000000 [23, 0]
Jan 12 08:26:51 localhost WindowServer[383]: update_gl_acceleration: device (0x7f8f20f06d20) is unsuitable for gl - disabling OpenGL
Jan 12 08:26:51 localhost kernel[0]: en0: 802.11d country code set to 'RU'.
Jan 12 08:26:51 localhost kernel[0]: en0: Supported channels 1 2 3 4 5 6 7 8 9 10 11 12 13 36 40 44 48 52 56 60 64 132 136 140 149 153 157 161 165
Jan 12 08:26:51 localhost airportd[117]: CreateVirtualInterface: Failed to create AWDL interface for en0 (Operation not supported)
Jan 12 08:26:52 localhost networkd[231]: init_symptom_framework Symptoms evaluator missing
Jan 12 08:26:52 localhost discoveryd[124]: WCFNameResolvesToAddr: called
Jan 12 08:26:52 localhost discoveryd[124]: WCFNameResolvesToAddr: entering
Jan 12 08:26:52 localhost discoveryd[124]: WCFNameResolvesToAddr: called
Jan 12 08:26:52 localhost discoveryd[124]: WCFNameResolvesToAddr: entering
Jan 12 08:26:52 localhost apsd[125]: Got connection error Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f8c0ad6dae0 {NSUnderlyingError=0x7f8c0c042620 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://albert.apple.com/deviceservices/deviceActivation?device=MacOS, NSErrorFailingURLKey=https://albert.apple.com/deviceservices/deviceActivation?device=MacOS, _kCFStreamErrorDomainKey=12, _kCFStreamErrorCodeKey=8, NSLocalizedDescription=The Internet connection appears to be offline.}
Jan 12 08:26:52 localhost apsd[125]: <APSCertificateManager: 0x7f8c0ad3c8f0>: Failed to get client cert on attempt 1, will retry in 15 seconds
Jan 12 08:26:52 localhost WindowServer[383]: Found 1 modes for display 0x00000000 [1, 0]
Jan 12 08:26:52 --- last message repeated 3 times ---
Jan 12 08:26:52 localhost WindowServer[383]: WSMachineUsesNewStyleMirroring: true
Jan 12 08:26:52 localhost WindowServer[383]: Display 0x04280640: GL mask 0x1; bounds (0, 0)[1440 x 900], 23 modes available
        Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a019, S/N 0, Unit 0, Rotation 0
        UUID 0xf466f621b5fa04a00800cfa6c258decd
Jan 12 08:26:52 localhost WindowServer[383]: Display 0x003f003f: GL mask 0x1; bounds (0, 0)[0 x 0], 1 modes available
        off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
        UUID 0xffffffffffffffffffffffffffffffff
Jan 12 08:26:52 localhost WindowServer[383]: Display 0x003f003e: GL mask 0x1; bounds (0, 0)[0 x 0], 1 modes available
        off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
        UUID 0xffffffffffffffffffffffffffffffff
Jan 12 08:26:52 localhost WindowServer[383]: Display 0x003f003d: GL mask 0x1; bounds (0, 0)[0 x 0], 1 modes available
        off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
        UUID 0xffffffffffffffffffffffffffffffff
Jan 12 08:26:52 localhost WindowServer[383]: Display 0x003f003c: GL mask 0x1; bounds (0, 0)[0 x 0], 1 modes available
        off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
        UUID 0xffffffffffffffffffffffffffffffff
Jan 12 08:26:52 localhost WindowServer[383]: Set a breakpoint at CGSLogError to catch errors as they are logged.
Jan 12 08:26:52 localhost WindowServer[383]: WSSetWindowTransform: Singular matrix
Jan 12 08:26:52 --- last message repeated 3 times ---
Jan 12 08:26:52 localhost WindowServer[383]: update_gl_acceleration: device (0x7f8f20f06d20) is unsuitable for gl - disabling OpenGL
Jan 12 08:26:52 localhost WindowServer[383]: Display 0x04280640: GL mask 0x1; bounds (0, 0)[1440 x 900], 23 modes available
        Main, Active, on-line, enabled, built-in, boot, Vendor 610, Model a019, S/N 0, Unit 0, Rotation 0
        UUID 0xf466f621b5fa04a00800cfa6c258decd
Jan 12 08:26:52 localhost WindowServer[383]: Display 0x003f003f: GL mask 0x1; bounds (2464, 0)[1 x 1], 1 modes available
        off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
        UUID 0xffffffffffffffffffffffffffffffff
Jan 12 08:26:52 localhost WindowServer[383]: Display 0x003f003e: GL mask 0x1; bounds (2465, 0)[1 x 1], 1 modes available
        off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
        UUID 0xffffffffffffffffffffffffffffffff
Jan 12 08:26:52 localhost WindowServer[383]: Display 0x003f003d: GL mask 0x1; bounds (2466, 0)[1 x 1], 1 modes available
        off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
        UUID 0xffffffffffffffffffffffffffffffff
Jan 12 08:26:52 localhost WindowServer[383]: Display 0x003f003c: GL mask 0x1; bounds (2467, 0)[1 x 1], 1 modes available
        off-line, enabled, Vendor ffffffff, Model ffffffff, S/N ffffffff, Unit 0, Rotation 0
        UUID 0xffffffffffffffffffffffffffffffff
Jan 12 08:26:52 localhost WindowServer[383]: CGXPerformInitialDisplayConfiguration
Jan 12 08:26:52 localhost WindowServer[383]:   Display 0x04280640: Unit 0; Vendor 0x610 Model 0xa019 S/N 0 Dimensions 13.03 x 8.15; online enabled built-in, Bounds (0,0)[1440 x 900], Rotation 0, Resolution 2
Jan 12 08:26:52 localhost WindowServer[383]:   Display 0x003f003f: Unit 0; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2464,0)[1 x 1], Rotation 0, Resolution 1
Jan 12 08:26:52 localhost WindowServer[383]:   Display 0x003f003e: Unit 0; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2465,0)[1 x 1], Rotation 0, Resolution 1
Jan 12 08:26:52 localhost WindowServer[383]:   Display 0x003f003d: Unit 0; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2466,0)[1 x 1], Rotation 0, Resolution 1
Jan 12 08:26:52 localhost WindowServer[383]:   Display 0x003f003c: Unit 0; Vendor 0xffffffff Model 0xffffffff S/N -1 Dimensions 0.00 x 0.00; offline enabled, Bounds (2467,0)[1 x 1], Rotation 0, Resolution 1
Jan 12 08:26:52 localhost WindowServer[383]: CGXMuxBoot: Boot normal
Jan 12 08:26:52 localhost WindowServer[383]: initialize_display_context: dev counts are zero (0, 0) - disabling OpenGL
Jan 12 08:26:52 localhost WindowServer[383]: GLCompositor enabled for tile size [256 x 256]
Jan 12 08:26:52 localhost WindowServer[383]: CGXGLInitMipMap: mip map mode is on
Jan 12 08:26:52 localhost WindowServer[383]: [checkin] Setting session securitySessionID=0x186a0 attr=0x11 because first euid=0 process, Language Chooser, is checking in and we're running in MacBuddy or off the installation disk.
Jan 12 08:26:52 localhost airportd[117]: __doNVRAMAutoJoin: No scan results Error Domain=com.apple.wifi.apple80211API.error Code=-3903 "The operation couldn?~@~Yt be completed. (com.apple.wifi.apple80211API.error error -3903.)"
Jan 12 08:26:52 localhost fontd[386]: XType uses Installer Environment mode.
Jan 12 08:26:54 localhost fontd[386]: ATS running in a crippled state!
Jan 12 08:26:54 localhost WindowServer[383]: **DMPROXY** (2) Found `/System/Library/CoreServices/DMProxy'. Run with arg = -discovery
Jan 12 08:26:54 localhost WindowServer[383]: CGXSetDisplayColorProfile: Display 0x04280640: Unit 0; ColorProfile { -299538803 }
Jan 12 08:26:54 localhost WindowServer[383]: CGXSetDisplayColorProfileAndTransfer: Display 0x04280640: Unit 0; ColorProfile { -299538803 }; TransferFormula (1.000000, 1.000000, 1.000000)
Jan 12 08:26:54 --- last message repeated 1 time ---
Jan 12 08:26:54 localhost blued[130]: Logging disabled
Jan 12 08:26:54 localhost blued[130]: Acquiring the WiFi lock - audio
Jan 12 08:26:54 localhost blued[130]: Acquired the WiFi lock - audio
Jan 12 08:26:54 localhost blued[130]: Release the WiFi lock - audio
Jan 12 08:26:56 localhost pboard[389]: Attempt to unlink previous shared memory during startup returned an error. Continuing...
Jan 12 08:26:57 localhost WindowServer[383]: [checkin] Another euid=0 process is checking in, which matches the existing session id 0x186a0, but it isn't loginwindow. pid=391 name=OS X Utilities
Jan 12 08:26:58 localhost Apple80211 framework[391]: CWIsInstallEnvironment: COREWLAN: executing in install environment
Jan 12 08:26:59 localhost sandboxd[228]: iconservices (118) deny file-write-create /Library/Caches
Jan 12 08:26:59 localhost iconservicesd[118]: Error creating cache folder at path: /Library/Caches/com.apple.iconservices.store
Jan 12 08:27:08 localhost discoveryd[124]: WCFNameResolvesToAddr: called
Jan 12 08:27:08 localhost discoveryd[124]: WCFNameResolvesToAddr: entering
Jan 12 08:27:08 localhost discoveryd[124]: WCFNameResolvesToAddr: called
Jan 12 08:27:08 localhost discoveryd[124]: WCFNameResolvesToAddr: entering
Jan 12 08:27:08 localhost apsd[125]: Got connection error Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f8c0ac38720 {NSUnderlyingError=0x7f8c0ac32720 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://albert.apple.com/deviceservices/deviceActivation?device=MacOS, NSErrorFailingURLKey=https://albert.apple.com/deviceservices/deviceActivation?device=MacOS, _kCFStreamErrorDomainKey=12, _kCFStreamErrorCodeKey=8, NSLocalizedDescription=The Internet connection appears to be offline.}
Jan 12 08:27:08 localhost apsd[125]: <APSCertificateManager: 0x7f8c0ad3c8f0>: Failed to get client cert on attempt 2, will retry in 15 seconds
Jan 12 08:27:23 localhost discoveryd[124]: WCFNameResolvesToAddr: called
Jan 12 08:27:23 localhost discoveryd[124]: WCFNameResolvesToAddr: entering
Jan 12 08:27:23 localhost discoveryd[124]: WCFNameResolvesToAddr: called
Jan 12 08:27:23 localhost discoveryd[124]: WCFNameResolvesToAddr: entering
Jan 12 08:27:23 localhost apsd[125]: Got connection error Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f8c0ad4f280 {NSUnderlyingError=0x7f8c0ad5c2a0 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://albert.apple.com/deviceservices/deviceActivation?device=MacOS, NSErrorFailingURLKey=https://albert.apple.com/deviceservices/deviceActivation?device=MacOS, _kCFStreamErrorDomainKey=12, _kCFStreamErrorCodeKey=8, NSLocalizedDescription=The Internet connection appears to be offline.}
Jan 12 08:27:23 localhost apsd[125]: <APSCertificateManager: 0x7f8c0ad3c8f0>: Failed to get client cert on attempt 3, will retry in 30 seconds
Jan 12 08:27:39 localhost WindowServer[383]: [checkin] Another euid=0 process is checking in, which matches the existing session id 0x186a0, but it isn't loginwindow. pid=393 name=Terminal
Jan 12 08:27:39 localhost sandboxd[228]: iconservices (118) deny file-write-create /Library/Caches
Jan 12 08:27:39 localhost iconservicesd[118]: Error creating cache folder at path: /Library/Caches/com.apple.iconservices.store
Jan 12 08:27:53 localhost discoveryd[124]: WCFNameResolvesToAddr: called
Jan 12 08:27:53 localhost discoveryd[124]: WCFNameResolvesToAddr: entering
Jan 12 08:27:53 localhost discoveryd[124]: WCFNameResolvesToAddr: called
Jan 12 08:27:53 localhost discoveryd[124]: WCFNameResolvesToAddr: entering
Jan 12 08:27:53 localhost apsd[125]: Got connection error Error Domain=NSURLErrorDomain Code=-1009 "The Internet connection appears to be offline." UserInfo=0x7f8c0ac3bb70 {NSUnderlyingError=0x7f8c0ac23df0 "The Internet connection appears to be offline.", NSErrorFailingURLStringKey=https://albert.apple.com/deviceservices/deviceActivation?device=MacOS, NSErrorFailingURLKey=https://albert.apple.com/deviceservices/deviceActivation?device=MacOS, _kCFStreamErrorDomainKey=12, _kCFStreamErrorCodeKey=8, NSLocalizedDescription=The Internet connection appears to be offline.}
Jan 12 08:27:53 localhost apsd[125]: <APSCertificateManager: 0x7f8c0ad3c8f0>: Failed to get client cert on attempt 4, will retry in 60 seconds
Jan 12 08:28:05 localhost WindowServer[383]: [checkin] Another euid=0 process is checking in, which matches the existing session id 0x186a0, but it isn't loginwindow. pid=399 name=Safari
Jan 12 08:28:05 localhost Safari[399]: ***storageTaskManagerExistsWithIdentifier:withIdentifier failed: Error Domain=NSCocoaErrorDomain Code=4099 "Couldn?~@~Yt communicate with a helper application." (The connection to service named com.apple.nsurlstorage-cache was invalidated.) UserInfo=0x7ffcf0d5caf0 {NSDebugDescription=The connection to service named com.apple.nsurlstorage-cache was invalidated.}; {
            NSDebugDescription = "The connection to service named com.apple.nsurlstorage-cache was invalidated.";
Jan 12 08:28:05 localhost Safari[399]: NSSoftLinking - The ShareKit framework's library couldn't be loaded from (null).
Jan 12 08:28:06 --- last message repeated 2 times ---
Jan 12 08:28:06 localhost distnoted[402]: # distnote server agent absolute time: 96.288592867   civil time: Mon Jan 12 08:28:06 2015   pid: 402 uid: 0 root: no
Jan 12 08:28:06 localhost WindowServer[383]: [checkin] Another euid=0 process is checking in, which matches the existing session id 0x186a0, but it isn't loginwindow. pid=401 name=com.apple.WebKit.WebContent
Jan 12 08:28:06 localhost Safari[399]: Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Jan 12 08:28:06 localhost Safari[399]: IPC call returned unknown error code (11,1102) (Mach error 44e)
Jan 12 08:28:06 localhost Safari[399]: Foundation::NetException "PSAgentLaunchError (1002,202)" caught in PubSub::IPCClient::IPCClient()
Jan 12 08:28:06 localhost Safari[399]: IPCClient: Server port 0 is invalid; looking it up again...
Jan 12 08:28:06 localhost Safari[399]: IPC call returned unknown error code (11,1102) (Mach error 44e)
Jan 12 08:28:06 localhost Safari[399]: Foundation::NetException "PSAgentLaunchError (1002,202)" caught in +[PSClient clientForBundleIdentifier:]
Jan 12 08:28:06 localhost Safari[399]: NSUbiquitousKeyValueStore is unavailable.
Jan 12 08:28:06 localhost sandboxd[228]: iconservices (118) deny file-write-create /Library/Caches
Jan 12 08:28:06 localhost iconservicesd[118]: Error creating cache folder at path: /Library/Caches/com.apple.iconservices.store
Jan 12 08:28:06 localhost com.apple.WebKit.WebContent[401]: ***storageTaskManagerExistsWithIdentifier:withIdentifier failed: Error Domain=NSCocoaErrorDomain Code=4099 "Couldn?~@~Yt communicate with a helper application." (The connection to service named com.apple.nsurlstorage-cache was invalidated.) UserInfo=0x7f9d2a604610 {NSDebugDescription=The connection to service named com.apple.nsurlstorage-cache was invalidated.}; {
            NSDebugDescription = "The connection to service named com.apple.nsurlstorage-cache was invalidated.";
Jan 12 08:28:06 localhost com.apple.WebKit.Networking[400]: ***storageTaskManagerExistsWithIdentifier:withIdentifier failed: Error Domain=NSCocoaErrorDomain Code=4099 "Couldn?~@~Yt communicate with a helper application." (The connection to service named com.apple.nsurlstorage-cache was invalidated.) UserInfo=0x7f95f152f410 {NSDebugDescription=The connection to service named com.apple.nsurlstorage-cache was invalidated.}; {
            NSDebugDescription = "The connection to service named com.apple.nsurlstorage-cache was invalidated.";
Jan 12 08:28:06 localhost com.apple.WebKit.Networking[400]: Can not connect to /var/run/systemkeychaincheck.socket: No such file or directory
Jan 12 08:28:06 localhost discoveryd[124]: WCFNameResolvesToAddr: called
Jan 12 08:28:06 localhost discoveryd[124]: WCFNameResolvesToAddr: entering
Jan 12 08:28:06 localhost discoveryd[124]: WCFNameResolvesToAddr: called
Jan 12 08:28:06 localhost discoveryd[124]: WCFNameResolvesToAddr: entering
Jan 12 08:28:07 localhost com.apple.WebKit.WebContent[401]: CoreAnimation: failed to create OpenGL context
Jan 12 08:28:10 localhost Apple80211 framework[391]: Wi-Fi preferences not up to date
Jan 12 08:28:40 --- last message repeated 43 times ---

Similar Messages

13017 Received TACACS+ packet from unknown Network Device or AAA Client

I am adding new routers to our Corporate network for a new MPLS network. I am getting 13017 Received TACACS+ packet from unknown Network Device or AAA Client errors for these new routers. They are added to ACS 5.4.0.30 correctly just like all of our other devices. We have never had real routers on the network before, just switches and access points. Is there something special I need to set in ACS for these to work and authenticate correctly? I can only access the currently with built in login locally.
One of the new router configs
Current configuration : 2370 bytes
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname T666
boot-start-marker
boot-end-marker
enable secret 5 $1$h7b3$.T2idTKb9H98BQ8Op0MAC/
aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authorization exec default group tacacs+ local if-authenticated
aaa accounting exec default start-stop group tacacs+
aaa session-id common
clock timezone CST -6
clock summer-time CDT recurring
ip cef
ip auth-proxy max-nodata-conns 3
ip admission max-nodata-conns 3
voice-card 0
crypto pki trustpoint TP-self-signed-2699490457
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-2699490457
revocation-check none
rsakeypair TP-self-signed-2699490457
username netadmin privilege 15 secret 5 $1$SIR2$A3MpShVNeAOlTPyLZESr..
interface FastEthernet0/0
ip address 10.114.2.1 255.255.255.0
ip helper-address 10.30.101.4
duplex auto
speed auto
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
interface Serial0/1/0
ip address X.X.X.X 255.255.255.252
no fair-queue
service-module t1 timeslots 1-24
service-module t1 remote-alarm-enable
service-module t1 fdl ansi
no cdp enable
router bgp 65065
no synchronization
bgp log-neighbor-changes
network 10.114.2.0 mask 255.255.255.0
neighbor X.X.X.X remote-as 209
neighbor X.X.X.X default-originate
default-information originate
no auto-summary
ip forward-protocol nd
ip bgp-community new-format
ip http server
ip http authentication aaa
ip http secure-server
ip tacacs source-interface FastEthernet0/0
no logging trap
tacacs-server host 10.30.101.221 key 7 1429005B5C502225
tacacs-server host 10.30.101.222 key 7 1429005B5C502225
tacacs-server directed-request
control-plane
banner exec ^CC
C
Login OK
^C
banner motd ^CC
C
** UNAUTHORIZED ACCESS TO THIS SYSTEM IS PROHIBITED. USE OF
** THIS SYSTEM CONSTITUES CONSENT TO MONITORING AT ALL TIMES.
** RUAN Transport Corporation
** Network Services
** [email protected]
** 515.245.2512
^C
line con 0
line aux 0
line vty 0 4
exec-timeout 30 0
transport input all
line vty 5 15
exec-timeout 30 0
scheduler allocate 20000 1000
end
T666#

AAA Protocol > TACACS+ Authentication Details
Date :
September 19, 2014
Generated on September 19, 2014 10:21:27 AM CDT
Authentication Details
Status:
Failed
Failure Reason:
13017 Received TACACS+ packet from unknown Network Device or AAA Client
Logged At:
Sep 19, 2014 10:21 AM
ACS Time:
Sep 19, 2014 10:21 AM
ACS Instance:
acs01
Authentication Method:
Authentication Type:
Privilege Level:
User
Username:
Remote Address:
Network Device
Network Device:
Network Device IP Address:
10.114.2.1
Network Device Groups:
Access Policy
Access Service:
Identity Store:
Selected Shell Profile:
Active Directory Domain:
Identity Group:
Access Service Selection Matched Rule :
Identity Policy Matched Rule:
Selected Identity Stores:
Query Identity Stores:
Selected Query Identity Stores:
Group Mapping Policy Matched Rule:
Authorization Policy Matched Rule:
Authorization Exception Policy Matched Rule:
Other
ACS Session ID:
Service:
AV Pairs:
Response Time:
Other Attributes:
ACSVersion=acs-5.3.0.40-B.839
ConfigVersionId=359
Device Port=59840
Protocol=Tacacs
Authentication Result
Steps
Received TACACS+ packet from unknown Network Device or AAA Client
Additional Details
DiagnosticsACS Configuration Changes

Error in file receiver channel "Unknown payload format 0 in the message"

hello
there is an errror in my receiver file channel with the status "Unknown payload format "
my channel is file receiver channel.
we implemented one sap note 1295430 and after that channnel is giving the error.
Please forward your views.
thanks.

Hi there,
First of all, what TBDL means - It means that the message was successfully delivered from Integration Server and that the messages are handed over to the Messaging System.
TBDL occurs when the message is put into the receiving queue of the Messaging System.
What can be done?
Go to Messaging System receive servlet:
http://<Host>:<PORT>/MessagingSystem/receive/<CONNECTION>/<PROTOCOL>
If this was executed successfully, then the MS returns HTTP 200 to the Integration Server and the status TBDL moves to DELIVERING (check whether you have authorization to go to the above link).
--> Log-in to SAP using - XIAPPLUSER & XIAFUSER, and check if they are blocked
--> Check the messages:
AF
com.sap.aii.adapterframework.serviceuser.language
com.sap.aii.adapterframework.serviceuser.name = XIAFUSER
com.sap.aii.adapterframework.serviceuser.pwd
AS
com.sap.aii.applicationsystem.serviceuser.language
com.sap.aii.applicationsystem.serviceuser.name = XIAPPLUSER
com.sap.aii.applicationsystem.serviceuser.pwd
Also, worth reading - /people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
Let us know if you have more questions.
regards,
Neetesh

Problem with the examples of Transmitting and Receiving Custom RTP Payloads

I have tried the examples of this web:
http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/CustomPayload.html
Transmitting and Receiving Custom RTP Payloads
I run the examples all right.
But I want to transmit the sound using my own format, so i want to change the file PcmPacketizer.java
and PcmDepacketizer.java
I think the sound data is in the byte[] inData ---- {byte[] inData = (byte[])inBuf.getData();}
so i change the data with my own function, so the inData have the diffrent length:
then i transmit the data with the packet header
public synchronized int process(Buffer inBuf, Buffer outBuf) {
int inLength = inBuf.getLength();
byte[] inData = (enbase((byte[])inBuf.getData()));
byte[] outData = (byte[])outBuf.getData();
     if (outData == null || outData.length < PACKET_SIZE) {
     outData = new byte[PACKET_SIZE];
     outBuf.setData(outData);
     // Generate the packet header.
     int rate = (int)inFormat.getSampleRate();
     int size = (int)inFormat.getSampleSizeInBits();
     int channels = (int)inFormat.getChannels();
     outData[0] = 0;     // filler
     outData[1] = (byte)((rate >> 16) & 0xff);
     outData[2] = (byte)((rate >> 8) & 0xff);
     outData[3] = (byte)(rate & 0xff);
     outData[4] = (byte)inFormat.getSampleSizeInBits();
     outData[5] = (byte)inFormat.getChannels();
     outData[6] = (byte)inFormat.getEndian();
     outData[7] = (byte)inFormat.getSigned();
     int frameSize = inFormat.getSampleSizeInBits() * inFormat.getChannels();
     // Recompute the output format if the input format has changed.
     // The crucial info is the frame rate and size. These are used
     // to compute the actual rate the data being sent.
     if (rate != (int)outFormat.getFrameRate() ||
     frameSize != outFormat.getFrameSizeInBits()) {
          outFormat = new AudioFormat(CUSTOM_PCM,
                    AudioFormat.NOT_SPECIFIED, // rate
                    AudioFormat.NOT_SPECIFIED, // size
                    AudioFormat.NOT_SPECIFIED, // channel
                    AudioFormat.NOT_SPECIFIED, // endian
                    AudioFormat.NOT_SPECIFIED, // signed
                    size * channels,     // frame size
                    rate,               // frame rate
                    null);
if (inLength + historyLength >= DATA_SIZE) {
     // Enough data for one packet.
               int copyFromHistory = Math.min(historyLength, DATA_SIZE);
               System.arraycopy(history, 0, outData, HDR_SIZE , copyFromHistory);
int remainingBytes = DATA_SIZE - copyFromHistory;
System.arraycopy(inData, inBuf.getOffset(),
               outData, copyFromHistory + HDR_SIZE, remainingBytes);
historyLength -= copyFromHistory;
inBuf.setOffset( inBuf.getOffset() + remainingBytes);
inBuf.setLength( inLength - remainingBytes);
     outBuf.setFormat(outFormat);
     outBuf.setLength(PACKET_SIZE);
     outBuf.setOffset(0);
return INPUT_BUFFER_NOT_CONSUMED ;
if (inBuf.isEOM()) { // last packet
System.arraycopy(history, 0, outData, HDR_SIZE, historyLength);
System.arraycopy(inData, inBuf.getOffset(),
               outData, historyLength + HDR_SIZE, inLength);
     outBuf.setFormat(outFormat);
     outBuf.setLength(inLength + historyLength + HDR_SIZE);
     outBuf.setOffset(0);
historyLength = 0;
return BUFFER_PROCESSED_OK;
// Not enough data for one packet. Save the remainder
     // for next time.
System.arraycopy(inData, inBuf.getOffset(),
               history, historyLength,inLength) ;
historyLength += inLength;
return OUTPUT_BUFFER_NOT_FILLED ;
I think I change the data use my own function debase(), so i should decode the data in the file:PcmDepacketizer.java
but int PcmDepacketizer.java the example is so simple that i don't know how to find and change the data.
there is only a few lines here:
Object outData = outBuf.getData();
     outBuf.setData(inBuf.getData());
     inBuf.setData(outData);
     outBuf.setLength(inBuf.getLength() - HDR_SIZE);
     outBuf.setOffset(inBuf.getOffset() + HDR_SIZE);
     System.out.println("the outBuf length is "+inBuf.getLength());
I write a function : public static byte [] debase(byte[] str)
but i don't know where can i use it.
please tell me what should i do or where is wrong about my thought.

the function in PcmPackettizer.java is
public static byte[] enbase(byte [] b) {
     ByteArrayOutputStream os = new ByteArrayOutputStream();
     //byte[] oo = new byte[(b.length + 2) / 3*4];
     //for (int i = 0; i < (b.length + 2) / 3; i++) {
     for (int i = 0; i < (b.length + 2) / 3; i++) {
          short [] s = new short[3];
          short [] t = new short[4];
          for (int j = 0; j < 3; j++) {
               if ((i * 3 + j) < b.length)
                    s[j] = (short) (b[i*3+j] & 0xFF);
               else
                    s[j] = -1;
          t[0] = (short) (s[0] >> 2);
          if (s[1] == -1)
               t[1] = (short) (((s[0] & 0x3) << 4));
          else
               t[1] = (short) (((s[0] & 0x3) << 4) + (s[1] >> 4));
          if (s[1] == -1)
               t[2] = t[3] = 64;
          else if (s[2] == -1) {
               t[2] = (short) (((s[1] & 0xF) << 2));
               t[3] = 64;
          else {
               t[2] = (short) (((s[1] & 0xF) << 2) + (s[2] >> 6));
               t[3] = (short) (s[2] & 0x3F);
          for (int j = 0; j < 4; j++)
               os.write(t[j]);
               //os.write(t[j],(3*i+j),1);
               //os.write(Base64.charAt(t[j]));
     //return new String(os.toByteArray());
     return os.toByteArray();
just like the base64 function

CWMS 2.0 Error:unsupported Configuration-IRP not Receiving Network Packets

Hi,
I am having a 50 user deployment non redundant setup using non split DNS.The version used for deployment is CWMS 2.0.1.107B-AE .I have configured the ports as per the planning guide for manual deplyment,public access and Non split DNS. Forward and Reverse DNS Entries for are also configured
After deploying the vmmachine at the end ,during the system check i get an error showing that the irp in the DMZ is not able to receive network packets and thus the deployment status is shown as Unsupported Configuration
Attaching the error received. How do I troubleshoot this?Has anyone come across this error?

Hi,
You are definitely experiencing a network connectivity issue between the Admin and IRP VMs. Please, ensure that PING (ICMP) is allowed between the Admin and IRP VMs as well as all other required ports (http://www.cisco.com/c/en/us/td/docs/collaboration/CWMS/2_0/Planning_Guide/Planning_Guide_chapter_011.html#reference_CB65D7FE4B3746DDAF1649884AD777CE). Also, ensure that DNS server is reachable from internal and DMZ networks.
Furthermore, I can see that you are using domain.internal for your VM domains. Per Certification Authority announcements, they will stop issuing SSL certificates for internal domains next year (http://www.digicert.com/internal-names.htm) so it might be good to assign a valid domain name for your VMs. This is not related to the current issue you are seeing, but can help you avoid issues with SSL certs in the future.
-Dejan

IP Job in BW finished, but how can I check the IDoc receive status in BW ?

Hi,experts
After I execute a Infopackage with loading more than 200000 records data, the infopackage monitor show me yellow light, 186020 from 200000 records. this infomation still show me till now, seaval hours,it looks pause here.
And I check the request in the R/3, the Job has finished. as you know it means the R/3 push the IDoc already finished.
and how can I do now ? or how can I check the IDoc receive status in BW side?

Hi,
I too had the same problem, i executed the following to solve the proble, may be this will help you:
1) Go to T-code SM58 and select TRFC and press F6,
2) For manual push of I-Docs, GO to T-COde BD87 select perticular idoc and see the status if it is not executed properly then do the manual push by pressing Execute option,
Thanks,

Hello. Since accepting the upgrade to the current version of I Tunes (11.4) I have been unable to get the application to boot. I receive the message that I Tunes was not installed correctly and Error 7 (Windows Error 193).

Hello. Since accepting the upgrade to the current version of I Tunes (11.4) I have been unable to get the application to boot. I receive the message that I Tunes was not installed correctly and Error 7 (Windows Error 193). I have uninstalled/reinstalled I Tunes several times and this has not resolved the issue. I also uninstalled/reinstalled Microsoft.net Framework 4 since this was suggested by Apple support. This also has not resolved the issue.
When I reinstall I Tunes, I get a message that the “Service ‘apple mobile device’ failed to start.” Verify you have sufficient privileges to start system services. I attempted to manually start the Apple Mobile Device service but get a pop up stating, “Error 1053: The service did not respond to the start or control request in a timely fashion.”Unsure what I should try next.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Mobile Device Support, won't install normally.
In your case I suggest you start with a clean download of the setup file using the direct link. If reinstalling AMDS alone doesn't work try tearing everything down again.
tt2

What to do with received udp packet

Hello I can finally send and receive data with udp.
But now I receive a packet
socket.receive(packet);
But how can I get the ipaddress, portnumber and data from the packet?
I know I can get the byte length with socket.getLength.

did you bother looking at the API docs for DatagramPacket?

When I try booting from disk I receive 3 beeps

SL boots fine. When I try to boot from cd to run disk utility, I receive 3 POST beeps... I have upgraded to 8gb ram

I know this is an old post, but after a number of visits to the GENIUS BAR, and purchasing new RAM to see if it was actually a RAM issue the fix turned out to be quite unintuative soI thought I would post my fix.
Here's what I ended up doing:
Temporarily downgrade to 4 Gig Ram. I know, your MBP probably supports 8 Gb, but for whatever reason the boot from my CD didn't like this when I was trying to upgrade to a newer version and complete a disk utility fix.
So when I downgraded to the 4G sticks everything worked.
Just another thing to try, if reseating your 4G X 2 sticks doesn't appear to be working.

LXC guest cannot receive any packets

I am using vagrant-lxc, and it was working for a while, but one day it stop working. I tried using netctl for a while, but I switched the libvirt in the hopes of getting it working again, and it did... until I restarted
Here is the situation now.
On the guest:
root@vagrant-base-trusty-amd64:~# ping google.com
PING google.com (173.194.33.101) 56(84) bytes of data.
^C
--- google.com ping statistics ---
7 packets transmitted, 0 received, 100% packet loss, time 6007ms
root@vagrant-base-trusty-amd64:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
6: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether 5e:61:d5:bf:7b:78 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.222/24 brd 192.168.122.255 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::5c61:d5ff:febf:7b78/64 scope link
valid_lft forever preferred_lft forever
root@vagrant-base-trusty-amd64:~# ip r
default via 192.168.122.1 dev eth0
192.168.122.0/24 dev eth0 proto kernel scope link src 192.168.122.222
root@vagrant-base-trusty-amd64:~# ping 192.168.122.1
PING 192.168.122.1 (192.168.122.1) 56(84) bytes of data.
64 bytes from 192.168.122.1: icmp_seq=1 ttl=64 time=0.076 ms
64 bytes from 192.168.122.1: icmp_seq=2 ttl=64 time=0.074 ms
64 bytes from 192.168.122.1: icmp_seq=3 ttl=64 time=0.097 ms
64 bytes from 192.168.122.1: icmp_seq=4 ttl=64 time=0.071 ms
^C
--- 192.168.122.1 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 2998ms
rtt min/avg/max/mdev = 0.071/0.079/0.097/0.013 ms
root@vagrant-base-trusty-amd64:~# ping 192.168.1.100
PING 192.168.1.100 (192.168.1.100) 56(84) bytes of data.
64 bytes from 192.168.1.100: icmp_seq=1 ttl=64 time=0.082 ms
64 bytes from 192.168.1.100: icmp_seq=2 ttl=64 time=0.089 ms
64 bytes from 192.168.1.100: icmp_seq=3 ttl=64 time=0.102 ms
64 bytes from 192.168.1.100: icmp_seq=4 ttl=64 time=0.107 ms
^C
--- 192.168.1.100 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 2999ms
rtt min/avg/max/mdev = 0.082/0.095/0.107/0.010 ms
root@vagrant-base-trusty-amd64:~# ping 192.168.1.101
PING 192.168.1.101 (192.168.1.101) 56(84) bytes of data.
^C
--- 192.168.1.101 ping statistics ---
3 packets transmitted, 0 received, 100% packet loss, time 2007ms
root@vagrant-base-trusty-amd64:~# ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
^C
--- 192.168.1.1 ping statistics ---
9 packets transmitted, 0 received, 100% packet loss, time 8006ms
As you can see, DNS works and I can connect to the host.
On the host:
$ ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp6s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
inet 192.168.1.100/24 brd 192.168.1.255 scope global dynamic enp6s0
valid_lft 97sec preferred_lft 97sec
3: enp8s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
4: virbr0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default
link/ether xx:xx:xx:xx:xx:xx:brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
valid_lft forever preferred_lft forever
5: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc fq_codel master virbr0 state DOWN group default qlen 500
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
7: vethG19V8K: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master virbr0 state UP group default qlen 1000
link/ether xx:xx:xx:xx:xx:xx brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc18:13ff:fe34:9591/64 scope link
valid_lft forever preferred_lft forever
$ ip r
default via 192.168.1.1 dev enp6s0 proto dhcp src 192.168.1.100 metric 1024
192.168.1.0/24 dev enp6s0 proto kernel scope link src 192.168.1.100
192.168.1.1 dev enp6s0 proto dhcp scope link src 192.168.1.100 metric 1024
192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1
$ sudo iptables -nvL --line-numbers
Chain INPUT (policy ACCEPT 930 packets, 1731K bytes)
num pkts bytes target prot opt in out source destination
1 586 72820 f2b-SSH tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22
2 13 756 ACCEPT udp -- virbr0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:53
3 0 0 ACCEPT tcp -- virbr0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:53
4 5 1640 ACCEPT udp -- virbr0 * 0.0.0.0/0 0.0.0.0/0 udp dpt:67
5 0 0 ACCEPT tcp -- virbr0 * 0.0.0.0/0 0.0.0.0/0 tcp dpt:67
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
num pkts bytes target prot opt in out source destination
1 0 0 ACCEPT all -- * virbr0 0.0.0.0/0 192.168.122.0/24 ctstate RELATED,ESTABLISHED
2 51 3503 ACCEPT all -- virbr0 * 192.168.122.0/24 0.0.0.0/0
3 0 0 ACCEPT all -- virbr0 virbr0 0.0.0.0/0 0.0.0.0/0
4 0 0 REJECT all -- * virbr0 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable
5 0 0 REJECT all -- virbr0 * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable
Chain OUTPUT (policy ACCEPT 846 packets, 70698 bytes)
num pkts bytes target prot opt in out source destination
1 5 1716 ACCEPT udp -- * virbr0 0.0.0.0/0 0.0.0.0/0 udp dpt:68
Chain f2b-SSH (1 references)
num pkts bytes target prot opt in out source destination
1 386 57808 RETURN all -- * * 0.0.0.0/0 0.0.0.0/0
I tested that packets can get out using netcat to send UDP messages, and I received the messages on a server on the WAN, so I know packets are getting out, but they are not making it back.
I've tried removing lines 4 and 5 from the FORWARD chain, but it didn't help.

I had some weird issues with two Windows Server 2k8 R1 guests and networking between the two experiencing difficulties after some random amount of time. A reboot often fixes it for a short period of time, but then it comes back.
After a thorough investigation with Oracle Support, we didn't identify the root cause; however upgrading to Oracle VM 2.2.2 fixed the issue.
Edit: To clarify, my issues were that RDP and mapping network shares between the two servers wouldn't work... but communication to other non-OracleVM (and some Oracle VM guests as well actually) was fine.
Doing tcpdump traces on dom0 identified intermittent packet drops somewhere between the xenbrXX interface and the underlying network interface (e.g. in my case, bond0.XX).
Edited by: user10786594 on 20/01/2012 11:39

WINS received a packet that has the wrong format. For example, a label may be More than 63 octets.

Our 2 wins server just started throwing these errors, twice a minute: WINS received a packet that has the wrong format. For example, a label may be More than 63 octets
No changes were done to any of the DC's. We are running Window 2008 and 2012 wins and they are replication partners.
I found this article but not useful in this case.
https://social.technet.microsoft.com/Forums/windowsserver/en-US/9b246bef-9469-43e8-9ae9-7c645d739789/wins-error-event-id-4119?forum=winserverDS
Did not find to be helpful.
I restarted the services. Even read about the 2 reg keys:
VersCounterStartVal_HighWord
VersCounterStartVal_LowWord
No luck. Anything I can look at or do to stop these errors?

You might want to check with your network team. It might be something to do with the switches: https://msdn.microsoft.com/en-us/library/ms829701.aspx
By the way, in case you do not have an application that does not support DNS, it might be worth to rely only on DNS resolution in your environment.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

Requests stuck in 'Initialized' and 'Received' status

Hello.
I perceiving that in my environment, the Requests, usually "Revoke and Disable" are stucked either "Initialized" or "Received" status. I do not know why.
But, I saw that sometimes in the Resource of the User, the Resouce is Rrovisioning or Waiting.
First question.
If the Resource of the User is different of "enable or provisioned" status, this could interfering on the Request of Disabled or Revoke?
Second question.
How can I solve the problems of the "stuck requests"?
Bye.

Hey Daniel,
Request status itself in OIM is not consistent. For the answer , you need to go through each step and record what your status is to know what the outcome is going to be. So, you should get different status's if you do more than into one task and also have actual approval tasks involved.
I hope this helps,
THiago Leoncio.

Receiving full packets in Java

Hi there!
I'm trying to build a server in Java, and things are going relatively smoothly, but I have a problem. I seem to be receiving the same packets over and over, and not when they're supposed to be received in the protocol. This makes me believe that my code is not actually receiving full packets, but only parts of packets at a time. I.E instead of receiving this:
1 FULL PACKET
I am receiving this:
Packet Part 1
Packet Part 2
Packet Part 3
etc
My question is basically; Using Java.nio and the SocketChannel packets, how can I build packets from received data, without really knowing where the packet ends? It is a binary protocol, mostly, so I'm kinda left without a clue as to where each packet ends.
Here is my code that deals with receiving data:
* To change this template, choose Tools | Templates
* and open the template in the editor.
package juo;
import java.net.*;
import java.nio.*;
import java.nio.channels.*;
import java.nio.channels.spi.SelectorProvider;
import java.io.IOException;
import java.util.*;
* @author Afr0
public class Server
    private InetAddress m_HostAddress;
    private int m_Port;
    //Channel for incoming connections.
    private ServerSocketChannel m_ServerChannel;
    private Selector m_Selector;
    private ByteBuffer m_ReadBuffer = ByteBuffer.allocate(8192);
    private Worker m_Worker;
    // A list of ChangeRequest instances
    private List m_ChangeRequests = new LinkedList();
    // Maps a SocketChannel to a list of ByteBuffer instances
    private Map m_PendingData = new HashMap();
    private List<Client> m_Clients = new LinkedList();
    public Server(InetAddress HostAddress, int Port) throws IOException
        m_HostAddress = HostAddress;
        m_Port = Port;
        m_Worker = new Worker();
        m_Selector = InitSelector();
    private Selector InitSelector() throws IOException
        Selector SocketSelector = SelectorProvider.provider().openSelector();
        // Create a new non-blocking server socket channel
        m_ServerChannel = ServerSocketChannel.open();
        m_ServerChannel.configureBlocking(false);
        // Bind the server socket to the specified address and port
        InetSocketAddress isa = new InetSocketAddress(m_HostAddress, m_Port);
        m_ServerChannel.socket().bind(isa);
        // Register the server socket channel, indicating an interest in
        // accepting new connections
        m_ServerChannel.register(SocketSelector, SelectionKey.OP_ACCEPT);
        return SocketSelector;
    public void Run()
        while (true)
            try
                // Process any pending changes
                synchronized(m_ChangeRequests)
                    Iterator changes = m_ChangeRequests.iterator();
                    while (changes.hasNext())
                        ChangeRequest change = (ChangeRequest)changes.next();
                        switch(change.Type)
                            case ChangeRequest.CHANGEOPS:
                                SelectionKey key = change.Socket.keyFor(m_Selector);
                                key.interestOps(change.Ops);
                    m_ChangeRequests.clear();
                // Wait for an event one of the registered channels
                m_Selector.select();
                // Iterate over the set of keys for which events are available
                Iterator selectedKeys = m_Selector.selectedKeys().iterator();
                while (selectedKeys.hasNext())
                    SelectionKey key = (SelectionKey) selectedKeys.next();
                    selectedKeys.remove();
                    if (!key.isValid())
                        continue;
                    // Check what event is available and deal with it
                    if (key.isAcceptable())
                        Accept(key);
                    else if (key.isReadable())
                        Read(key);
                    else if(key.isWritable())
                        Write(key);
            catch (Exception e)
                e.printStackTrace();
     private void Accept(SelectionKey key) throws IOException
        // For an accept to be pending the channel must be a server socket channel.
        ServerSocketChannel serverSocketChannel = (ServerSocketChannel)key.channel();
        // Accept the connection and make it non-blocking
        SocketChannel socketChannel = serverSocketChannel.accept();
        Socket socket = socketChannel.socket();
        socketChannel.configureBlocking(false);
        m_Clients.add(new Client(socketChannel));
        // Register the new SocketChannel with our Selector, indicating
        // we'd like to be notified when there's data waiting to be read
        socketChannel.register(m_Selector, SelectionKey.OP_READ);
        System.out.println("New client connected!");
    private void Read(SelectionKey Key) throws IOException
          SocketChannel socketChannel = (SocketChannel)Key.channel();
          // Clear out our read buffer so it's ready for new data
          m_ReadBuffer.clear();
          // Attempt to read off the channel
          int numRead;
          try
                numRead = socketChannel.read(m_ReadBuffer);
          catch (IOException e)
                System.out.println("Disconnected client!\n");
                // The remote forcibly closed the connection, cancel
                // the selection key and close the channel.
                Key.cancel();
                socketChannel.close();
                return;
          if (numRead == -1)
                System.out.println("Disconnected client!\n");
                // Remote entity shut the socket down cleanly. Do the
                // same from our end and cancel the channel.
                Key.channel().close();
                Key.cancel();
                return;
          // Hand the data off to our worker thread
          Client Cl = Client.GetSpecificClient(socketChannel);
          m_Worker.ProcessData(this, Cl, m_ReadBuffer.array(), numRead);
    private void Write(SelectionKey key) throws IOException
        SocketChannel socketChannel = (SocketChannel) key.channel();
        synchronized (m_PendingData)
            List queue = (List) m_PendingData.get(socketChannel);
            // Write until there's not more data ...
            while (!queue.isEmpty())
                ByteBuffer buf = (ByteBuffer) queue.get(0);
                socketChannel.write(buf);
                if (buf.remaining() > 0)
                    // ... or the socket's buffer fills up
                    break;
                queue.remove(0);
            if (queue.isEmpty())
                // We wrote away all data, so we're no longer interested
                // in writing on this socket. Switch back to waiting for
                // data.
                key.interestOps(SelectionKey.OP_READ);
    public void Send(SocketChannel socket, byte[] data)
        synchronized (m_ChangeRequests)
            // Indicate we want the interest ops set changed
            m_ChangeRequests.add(new ChangeRequest(socket, ChangeRequest.CHANGEOPS, SelectionKey.OP_WRITE));
            // And queue the data we want written
            synchronized (m_PendingData)
                List queue = (List) m_PendingData.get(socket);
                if (queue == null)
                    queue = new ArrayList();
                    m_PendingData.put(socket, queue);
                queue.add(ByteBuffer.wrap(data));
        // Finally, wake up our selecting thread so it can make the required changes
        m_Selector.wakeup();
* To change this template, choose Tools | Templates
* and open the template in the editor.
package juo;
import java.util.*;
import java.nio.channels.*;
import java.nio.*;
* @author Afr0
public class Worker implements Runnable
    private List m_Queue = new LinkedList();
    public void ProcessData(Server Serv, Client Sock, byte[] Data, int Count)
        byte[] DataCopy = new byte[Count];
        System.arraycopy(Data, 0, DataCopy, 0, Count);
        synchronized(m_Queue)
            m_Queue.add(new ServerDataEvent(Serv, Sock, DataCopy));
            m_Queue.notify();
    public void run()
        ServerDataEvent DataEvent;
        while(true)
            // Wait for data to become available
            synchronized(m_Queue)
                while(m_Queue.isEmpty())
                    try
                        m_Queue.wait();
                    catch (InterruptedException e)
                DataEvent = (ServerDataEvent)m_Queue.remove(0);
            // Return to sender
            //DataEvent.server.Send(DataEvent.client.Socket(), DataEvent.data);
* To change this template, choose Tools | Templates
* and open the template in the editor.
package juo;
* @author Afr0
public class ServerDataEvent
    public Client client;
    public Server server;
    public byte[] data;
    public ServerDataEvent(Server Serv, Client Cl, byte[] Data)
        server = Serv;
        client = Cl;
        data = Data;
        ProcessData();
    private void ProcessData()
        if(!client.HasReadEncKey() && data.length == 4)
            System.out.println("Received encryption key!");
            client.SetEncKey(data);
            client.SetHasReadEncKey(true);
            return;
        byte OpCode = data[0];
        switch(OpCode)
            case (byte)0x80:
                System.out.println("Received account login request!");
                LoginPacketHandlers.OnAccountLoginRequest(this);
            case (byte)0xa0:
                System.out.println("Received shard select packet!");
                LoginPacketHandlers.OnShardSelect(this);
            case (byte)0x091:
                System.out.println("Received post login packet!");
                LoginPacketHandlers.OnPostLogin(this);
            case (byte) 0x00:
                System.out.println("Received create character packet!");
                LoginPacketHandlers.OnCharacterCreated(this);
* To change this template, choose Tools | Templates
* and open the template in the editor.
package juo;
import java.nio.channels.*;
import java.util.*;
import java.net.*;
* @author Afr0
public class Client
    private SocketChannel m_Socket;
    private boolean m_HasReadEncKey = false;
    private byte[] m_EncKey = new byte[4];
    public static List<Client> ClientList = new LinkedList();
    public Client(SocketChannel Socket)
        m_Socket = Socket;
        ClientList.add(this);
    public boolean HasReadEncKey()
        return m_HasReadEncKey;
    public void SetHasReadEncKey(boolean Value)
        m_HasReadEncKey = Value;
    public SocketChannel Socket()
        return m_Socket;
    public void SetEncKey(byte[] EncKey)
        m_EncKey = EncKey;
    public static Client GetSpecificClient(SocketChannel Sock)
        Iterator I = ClientList.iterator();
        while(I.hasNext())
            Client C = (Client)I.next();
            if(C.Socket() == Sock)
                return C;
        return null;
    public static Client GetSpecificClient(byte[] Address)
       Iterator I = ClientList.iterator();
        while(I.hasNext())
            Client C = (Client)I.next();
            if(CompareAddresses(C.Socket().socket().getLocalAddress().getAddress(), Address))
                return C;
        return null;
    private static boolean CompareAddresses(byte[] Address1, byte[] Address2)
       if(Address1[0] == Address2[0])
           if(Address1[1] == Address2[1])
                if(Address1[2] == Address2[2])
                    if(Address1[3] == Address2[3])
                        return true;
       return false;
}Most of my receiving code is taken from this tutorial: http://rox-xmlrpc.sourceforge.net/niotut/
Also, if it helps, here is the output from a typical session:
compile:
run:
New client connected!
Received encryption key!
Received account login request!
Name: Afr0
Pass: prins
C:\Users\Afr0\Documents\NetBeansProjects\jUO
Received shard select packet!
Received post login packet!
Received create character packet!
Read exception!
Disconnected client!
New client connected!
Received encryption key!
Received post login packet!
Received create character packet!
Read exception!
Received create character packet!
Disconnected client!
BUILD STOPPED (total time: 1 minute 48 seconds)Thanks in advance! Any reply appreciated!

This makes me believe that my code is not actually receiving full packets, but only parts of packets at a time.Your code uses TCP which provides a reliable byte stream. Not packets.
My question is basically; Using Java.nio and the SocketChannel packets, how can I build packets from received data, without really knowing where the packet ends? It is a binary protocol, mostly, so I'm kinda left without a clue as to where each packet ends.There are no 'packet' boundaries in TCP. If you need them you have to implement them yourself in your application protocol. Examples:
- a length word prefix
- a self-describing protocol such as XML.
Otherwise you need to do more with the byte-count returned by the read() method than just compare it with -1. In your code you should be passing it around with the ByteBuffer's array, or better still just the ByteBuffer, otherwise you don't know how much of the data is valid.
BTW closing a channel cancels all its SelectionKeys, you don't have to do that twice.
And you should only register for OP_WRITE when you have data to write. You have this back to front - you are waiting for data to write to arrive on the queue. The selector thread should only block in the select() method.

When attempting to set up iCloud on my iMac I receive the following error message 'To use the "iCloud" preferences pane, System Preferences must quit and reopen'. I have tried quitting, re-booting etc but still receive this message. Any ideas?

When attempting to set up iCloud on my iMac I receive the following error message "To use the 'iCloud' preferences pane, System Preferences must quit and reopen."
I have tried quitting, even re-booting etc but still receive this message. Any ideas?

This is a shot in the dark, but try this:
log-in to your iCloud account with your Apple ID
change your password
ensure your billing information is up-to-date
attempt to re-enable your Keychain (again)

How do I create, send and receive ethernet packets to UUT

I need to create and send ethernet packets to control and communicate with an RF board. I would also like to receive ethernet packets back which would be parsed and interpreted.

There you are!
I was wondering how this project was going.
As I said before, we need to know what protocol is being used.
Let me eaxplain. (Please refer to the diagrams and tutorial on pages 752-755 of 2002 NI catalog.)
802.3 is the spec for ethernet. It defines how packets will be transmitted on the wire.
Real Life analogy:
US Mail service.
It moves messages from one place to another. It defines that messages should be in an envelope. The Envelope must have a address so they know where it should be delivered to. You should also have a return address (but this is not enforced). Inside the envelope, you can put any kind of message you want as long as the person recieving it knows how to read it. The
reciever can look at the message and say "oh, this is english, I will read it in english".
Ethernet is similar. Ethernet (ignoring the electrical specs) defines a packet as consisting of
Source address (return address in US mail)
Destination address (delivery address)
Protocol (pretend there was a mark on the envelope that said this letter is in French).
Data (the letter itself)
Checksum (letter pages number as 1 of 4, 2 of 4, etc).
So what you have told me so far is that you want to send a letter!
You have been asking me how to comunicate with the other person but you have not told me what language they speak!
There are many different languages (i.e. protocol's) possible with 802.3.
Examples are
TCP/IP ( say this is English)
UDP (French)
etc....
LV has built in VI's to take a message and convert it to the protocol (lanuage) you want and send it on it's way.
So my question to you once more is;
What protocol are you using?
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Boot stack AppleUSBMultitouchDriver::checkStatus - received Status Packet, Payload 2: device was reinitialized

Similar Messages

Maybe you are looking for