Bootcamp no longer bootable after adding and deleting partitions

I am using a 2014 Macbook Pro with OSX 10.9.5
I was trying to add a partition to install Ubuntu on and after adding and deleting partitions, my bootcamp partition will no longer boot whether I use rEFIt or bootcamp assistant or normal osx boot menu.
Judging from the information I got from similar threads on this I think this information will be useful
Last login: Thu Apr  9 12:05:32 on ttys000
abdulrahmansmbp:~ abdulrahmanLASTNAMEREDACTED$ sudo gpt -r -vv show disk0
Password:
gpt show: disk0: mediasize=251000193024; sectorsize=512; blocks=490234752
gpt show: disk0: Suspicious MBR at sector 0
gpt show: disk0: Malformed MBR at sector 0
gpt show: disk0: Pri GPT at sector 1
gpt show: disk0: Sec GPT at sector 490234751
      start       size  index  contents
          0          1         MBR
          1          1         Pri GPT header
          2         32         Pri GPT table
         34          6        
         40     409600      1  GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
     409640  285122688      2  GPT part - 48465300-0000-11AA-AA11-00306543ECAC
  285532328    1269536      3  GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
  286801864    7847992        
  294649856  195584000      4  GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
  490233856        863        
  490234719         32         Sec GPT table
  490234751          1         Sec GPT header
abdulrahmansmbp:~ abdulrahmanLASTNAMEREDACTED$ sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 30515/255/63 [490234752 sectors]
Signature: 0xAA55
         Starting       Ending
#: id  cyl  hd sec -  cyl  hd sec [     start -       size]
1: EE    0   0   2 - 1023 254  63 [         1 -  294649855] <Unknown ID>
2: 07 1023 254  63 - 1023 254  63 [ 294649856 -  195584000] HPFS/QNX/AUX
3: 00    0   0   0 -    0   0   0 [         0 -          0] unused     
*4: 07    0   0   0 -    0   0   0 [         0 -          0] HPFS/QNX/AUX
abdulrahmansmbp:~ abdulrahmanLASTNAMEREDACTED$
It wasnt like this before. Before 3 and 4 had some of the same values from above instead of all 0s. After trying to take advice from threads with similar problems and entering stuff into the command line it became like this. I think I might have messed thing up while looking for a quick fix.
Can anyone help me with this? Thanks.

I'm not sure how to edit my replies so I'm just gonna make another reply. I assumed the following values:
GPT 3 Start
GPT 3 End
GPT 3 Size
NTFS Start
NTFS Offset
NTFS End
NTFS Size
293378384
293380320
1936
294649856
1936
490233855
195584000
I followed the rest of the instructions given here. I made sure to enter the second number with a + sign. After doing all of that all these checks worked:
Test 1 - Does Bootcamp Volume show up in Finder?
Test 2 - Can you see files in Bootcamp Volume?
Test 3 - Can you select Bootcamp in System Preferences -> Startup Disk?
I've always been able to access my bootcamp files from finder and I can try to boot from System Preferences -> startup disk, from rEFIt and also from my macbooks startup manager that I access by holding down option while booting.
I'm starting to think I've misrepresented my problem and that I've been looking at the wrong threads. Every time I try to boot windows I get a black screen with the Windows logo and some text saying something like "starting automatic recovery" or something like that. It then takes me to a blue screen displaying an error number and telling me to use recovery tools on the installation media. Maybe this is different from the problems I've been looking at in other threads.
I've tried using the same USB I used to install bootcamp with but it doesn't give me the option of repairing the installation.
EDIT: So I figured out how to edit replies. Anyway I just tried to boot into Windows and checked. The black screen with the Windows logo says "Preparing Automatic Repair". The blue screen gives me the error 0xc00000e.

Similar Messages

  • Bootcamp no longer works after adding partition via Windows 7

    I needed a D: drive in Windows and shrunk the system (C:) partition and added another partition intended to be a secondary drive in Windows.  After rebooting Windows throws a BSOD and I can't even select OS X as a bootable option.  Is anyone able to point me in the right direction on how to fix?  Thank you!

    I learned the FAQ the hard way
    diskutil list
    /dev/disk0
    #:          TYPE NAME                    SIZE          IDENTIFIER
    0:          FDisk_parition_scheme     *251.0 GB     disk0
    1:          Windows_LDM                  77.0GB        disk0s1
    2:          Windows_LDM                  94.5GB        disk0s2
    3:          Windows_LDM                  79.5GB        disk0s3
    /dev/disk1
    #:          TYPE NAME                    SIZE          IDENTIFIER
    0:          Apple_partition_scheme     *1.3 GB        disk1
    1:          Apple_partition_map          *30.7 KB       disk1s1
    2:          Apple__HFS OS X Base System     *1.3 GB        disk1s2
    From there it does /dev/disk2, /dev/disk3, until /dev/disk12 usually like:
    #:          TYPE NAME                    SIZE          IDENTIFIER
    0:          untitled                              *524.3 KB        disk2
    diskutil cs list
    No CoreStorage logical volume groups found
    gpt -vv -r show /dev/disk0
    gpt show: /dev/disk0: mediasize=251000193024; sectorsize=512; blocks=490234752
    gpt show: /dev/disk0: MBR at sector 0
    gpt show: /dev/disk0: Malformed MBR at sector 0
    gpt show: /dev/disk0: Bad CRC in GPT table at sector 2
    start          size          index          contents
    0               1                                MBR
    1               150392831   1             MBR part 66
    150392832 184604672   2             MBR part 66
    334997504 155235200   3             MBR part 66
    490232704 2048
    fdisk /dev/disk0
    DIsk: /dev/disk0               geometry: 30515/255/63  [490234752 sectors]
    Signature:  0xAA55
                        Starting                    Ending
    #:     id     cyl     hd     sec     -     cyl     hd     sec     [     start     -     size]
    1:     42    0       0        2        -    1023  254     63      [          1    -   150392831]   LinuxSwap DR
    2:     42   1023 254     63       -    1023  254     63      [150392832 -   184604672]  LinuxSwap DR
    3:     42   1023 254     63       -    1023  254     63      [334997504 -   155235200]  LinuxSwap DR
    *4:     07    0       0        0        -    0       0        0      [          0    -                    0]  HPFS/QNX/AUX

  • List of newaly added and deleted users

    I am looking for the powershell script to get the list of users which are added and deleted with in last 1 day from user profile service application. I do have SharePoint 2010
    Santosh sethi

    Hi Inderjeet, Thanks for the information, sorry steps metioned in above link didn't help me too much.
    I know the information of number of profiles deleted and added after each sync can be viewed through
    miisclient.exe , but not sure how to get the data with out open it in explorer view
    Santosh sethi

  • How can I edit imported audio track? After selecting and deleting region and joining remaining parts, it keeps playing the track with the deleted part! What am I doing wrong?

    How can I edit imported audio track? After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
    What am I doing wrong?

    After selecting and deleting region, and joining remaining parts, it keeps playing the track with the deleted region!
    What am I doing wrong?
    How exactly are you doing this?
    When I cut out a part of an audio region, then drag the remaining parts together, so they are touching, the track will skip the cut out section when playing the file.  Also, if I select the remaining parts of the region and use the command "Edit > join regions". This will create a new audio file with the cut out part deleted.
    You should see this prompt, when you are joining the regions:

  • Outlook Calendar items added and deleted at same time

    I have several repeating calendar items (like birthdays) in my Outlook calendar.  When I sync, I find that some are added (that I thought were there before) but some show as added and deleted at the same time to my blackberry... any ideas what may be causing the confusion?

    I find myself with the same issue, I just wiped my computer and began syncing and installing all programs back into laptop,now i have noticed that outlook does not add the some events in my calender, for instance, birthdays , one thing that i have noticed is that it only syncs items that have my work email, my other 2 emails are not being synced and those are my blackberry and personal emails.
    my syncing preferences are made to go both way sync ... what seems to be the problem 
    thanks 

  • "List Tools" tab is no longer available after adding webpart

    In SharePoint 2013 I have added a  generic content editor webpart to a discussion list (also tried with a documents library list). After this "List Tools" tab is no longer visible. Any ideas why?

    btw you can 'fix' it via script as detailed here;
    http://stackoverflow.com/questions/4848892/list-tools-tab-is-no-longer-available-after-adding-webpart-to-the-page
    SharePoint Designer was also a way to fix it in SP2010, not so sure for SP2013.
    w: http://www.the-north.com/sharepoint | t: @JMcAllisterCH | YouTube: http://www.youtube.com/user/JamieMcAllisterMVP

  • Adding and Deleting Multiple Rows or Columns

    How do you add or delete more than one row or column at a time.

    Robby! wrote:
    That's a great finding!
    I just wrote a feedback requesting a shortcut like this.
    It is a pity though that they desing it to work only if you select the header of the row/column. It should be enabled to work from within any cell in the table.
    Who wrote such an error ?
    These interesting shortcuts behave flawlessly even if the cursor was in D18 for instance.
    (a) I never saw them in the delivered resources.
    (b) they aren't responding to the OP's question which was about "Adding and Deleting Multiple Rows and Columns"
    Yvan KOENIG (from FRANCE vendredi 3 octobre 2008 18:39:01)

  • Ipod nano - Adding and deleting ??

    I manually drag and drop songs and playlists onto my pod nano, but after selecting and deleting songs from the nano I'm unable to delete the playlist title. How do I get rid of the playlist title ?
    Regards

    Its the actul playlist title in the nano menu I want to delete. I understand the procedure re deleting individual songs and several songs at the same time. I have deleted a list of songs that make up a playlist..but the palylist title remains in the nano...
    Regards

  • On my daughters IPHONE 5 i want to know which apps she has added and deleted.  Is there a log or way to track?

    My daughter has an IPHONE, i want to be able to track which applications she has added and deleted.  For instance, if she adds an application she shouldn't and when it comes time to verify and she doesn't have the application because she deleted it so i wouldn't see, is there a log or way to track what application have been added / deleted with dates and times?

    If you go to a computer that has the itunes program on it you are then able to go to the APPs store on itunes and login in with  your daughters apple id. Once logged in with her apple id you then are able to see all historical archies by simply clickon in the apple id going from there to 'accounts' from account you are able to see purchased items. Not clear exactly what the 'deleting' of apps is all about but certainlly this will allow you to track what has been downloaded to her apple id.
    Good luck.

  • My backup drive is no longer bootable after TimeMachine backup to it. Why?

    When I purchased a Lacie Porche 350 GB Firewire drive, I partitioned it properly via Disk Utilities and backed up my entire Hard drive using SilverKeeper to one of the two drives created by partitioning, resulting in an OS 10.4.10 Tiger bootable drive. Which I tested and it booted up perfectly. The day prior to upgrading to Leopard OS, I used SilverKeeper to back up everything on my hard drive again, since there were a lot of system software, security, also software programs and utilty updates on board since mm initial backup. Afterwards, I checked out the bootability of my back up drive (partition), which again worked perfectly.
    After installing Leopard, TimeMachine recognized and asked if I wanted it to back up my hard drive (with Leopard O)S to the same (it recognized) named backup drive (partition) and I clicked yes. TM's backup of my entire hard drive went quickly and without a hitch. I knew TM's backup was not a bootable type, but figured that I still had a bootable Tiger system on the same drive if I needed to use that in an emergency and decided to test that out again.
    Was wrong! Previously bootable drive no longer showed up in Startup Disk to select from in System Preferences. Thus no longer bootable! I now have 2 full backups of my entire hard drive (one with Tiger, the other with Leopard) on the one external drive, neither are bootable. Guess I can boot up from the installer DVD in emergency, but that wasn't the reason why I made a bootable backup drive to begin with.
    Don't know if and what TM did that rendered the formerly bootable drive unbootable. Did nothing to change the previously working bootable drive. Anyone else have similar experience after running TM? Idea of cause? Suggestions, or work-a-round? Is this a known issue, or should this be sent to Apple's Feedback?
    Thank you kindly,
    superush

    The TimeMachine backups were made to the same bootable clone partition that the Tiger bootable clone is on mentioned in my original post. The bootable clone was backed up there via SilverKeeper, which is included in the software that came with the 350 GB ,LaCie Porche external firewire drive.
    Am now thinking that perhaps that version of SilverKeeper, which was recognized by my OS Tiger, may not be recognized by Leopard OS, and when used TM to make backup to same partition cloned bootable drive, that may have made my bootable SilverKeeper backup clone null and void.
    Could that be the possibility?
    Best regards,
    superush

  • Can I get the summary of added and deleted words in two compared documents in Acrobat Pro XI as it was in Pro 6?

    I want to be able to estimate the amount of words that change from one document to another. I am using Adobe Acrobat Pro XI to compare two documents. The summary says "Differences exist between documents" and lists the amount of pages in each one. Then it goes on to the report and highlights insertions and deletions.
    I would like a more informative summary. Previously, in Adobe Acrobat Pro 6.0 (I don't really know after that), the summary I got after comparing two documents contained how many words had been added and how many words had been deleted.
    I have checked the configuration of the new Acrobat but I have not been able to find the same functionality. Is there something I am missing? Is this feature not supported anymore?
    If so, is there a workaround? I have been looking into using JavaScript but I cannot access properties of words that the program highlights as having changed. Thank you very much for any insight you may have.

    OCR is only for recoginition of the image / picture of text provided by an scanner.
    Content typed into a Word file which is converted to a PDF is (in Word and in PDF) *not* an image  or picture of text - it is the digital text. So, no OCR involved.
    When the "digital" (renderable) text of a PDF's page content is exported to Word no OCR is involved.
    When a PDF's content is from the image output of a scanner and this is a picture of text then OCR comes into play.
    If this content is exported to Word before doing OCR then it is the image that is exported to the Word file.
    Once OCR is performed it is the OCR output that is exported.
    OCR output is (always will be) impacted by "the quality of the OCR and the scans of the documents". 
    Regardless "Compare" is based on a Word file output to PDF1 then edits to the Word file followed by an output to PDF2. You use Acrobat Pro to do a compare of PDF1 & PDF2.
    Paper 1 scanned to image 1 to image 1 in PDF1 that gets OCR 1 and
    Paper 2 scanned to image 2 to image 2 in PDF2 that gets OCR 2
    being processed with Acrobat Pro's Compare can certainly be done.
    But - well you've described what can be observed.
    Be well...

  • Recommended practice for adding and deleting from a Collection

    Are there any suggestions for updating a Collection in a OneToMany ( privateOwned ) Collection? Here is our use case:
    1. Retrieve a Source object from the database
    2. Remove 1 or more SourceLinks from the sourceLinks Set
    3. Add 1 or more new SourceLinks to the sourceLinks Set
    4. Update the Source object
    The SourceLink object has isPrivateOwned(true).
    Adding and Removing things from a Collection seems like a fairly common use case. Are there recommended ways of handeling the above case? I've tried doing the add/remove operation in one transaction as well as removing, then re-fetching, and then adding in separate transactions and haven't had any luck.
    Here is the code an test case.
    class Source
    @OneToMany(mappedBy = "source",
    fetch = FetchType.EAGER,
    cascade = { CascadeType.ALL })
    private Set<SourceLink> sourceLinks = new HashSet<SourceLink>();
    class SourceLink
    @ManyToOne
    @JoinColumn(nullable = false)
    private Source source;
    //~ Unit Tests
    @Test
    public void testMultiUpdateSourceLink()
    // typical set up.
    SourceLink sourceLink = new SourceLink( "junit1", 48, "mp3" );
    SourceLink sourceLink2 = new SourceLink( "junit2", 64, "mp3" );
    Source mySource = new Source( "http://www.site.com", SourceType.RSS );
    mySource.addSourceLink( sourceLink );
    mySource.addSourceLink( sourceLink2 );
    beginTransaction();
    sourceDao.persist( mySource );
    commitTransaction();
    Long sourceId = mySource.getId();
    Assert.assertEquals( 2, mySource.getSourceLinks().size() );
    // fetching what we just added, then deleting something from the set
    // with privateOwned this works.
    beginTransaction();
    Source fetched = sourceDao.find( sourceId );
    fetched.deleteSourceLink( sourceLink );
    sourceDao.update( fetched );
    commitTransaction();
    Assert.assertEquals( 1, fetched.getSourceLinks().size() );
    // now fetch again, try to add a new SourceLink
    // fails with an OptimisticLockException
    beginTransaction();
    Source updated = sourceDao.find( sourceId );
    Assert.assertEquals( 1, updated.getSourceLinks().size() );
    SourceLink sl = new SourceLink( "ryan", 64, "mp3" );
    updated.addSourceLink( sl );
    sourceDao.update( updated );
    commitTransaction();
    Assert.assertEquals( 2, updated.getSourceLinks().size() );
    The sourceDao.update() method simply calls entityManager.merge(source). Is it required to flush the entityManager as well?

    Hi,
    TMG MBE doesn't have the capability to add network topolgy routes via the TMG MMC. You have to use the ROUTE ADD /P command from a privileged command prompt
    regards Marc Grote aka Jens Baier - www.it-training-grote.de - www.forefront-tmg.de - www.galileocomputing.de/3276?GPP=MarcGrote

  • Capturing DDL only for 'ADDING and DELETING' a column

    Hi
    Source Oracle 11.2
    GG Version: 11.2
    I am configuring the replication between oracle-oracle and regarding DDL replication ,for few tables , in addition to the DML replication , i want to capture only the DDL's related to the structure changes to the table (only adding or deleting a column) and noting else for ddl. For this ,  is the below command sufficient for my requirement or do i need to have the 'exculde' parameter specifying all those that needs to be excluded.If anything else needs to be configured , please let me know .
    DDL INCLUDE MAPPED include optype 'alter'
    Thanks in advance.

    Appreciate if someone can throw some light on this  as i am a bit confused after reading the doc.
    Thanks

  • CUA - Programs adding and deleting User Rolls

    Good Day;
    We are currently bring CUA up and using a sandbox as a test child system. Once fully deployed, we will have CUA controling all systems (Sandboxes, Dev, Quality), except production.
    Issue - We currently have an application that allows for the adding or deleting of Rolls through the portal. When this was testing, the program failed.
    We need to be able to test in both the development and quality systems.
    Question. Is there a way (config maybe) that a program would be able to add and delete Rolls as well as have CUA active.
    Regards

    Don,
    Thanks and I wish you luck on your adventure to CUA.
    I think the documentation you will find will not cover CUA landscape design.  It will only cover technical configuration.
    I based my design on functionality and some common sense.  I'll give you the reasonging for our design due to our project scenario.
    Production:
    We are using HR position base security and CUA.  The master is the ECC 6.0 system.  We have about 37,000 user IDs and IT 105s (HR info type for communition which is the user ID).
    Do I really want to mix my live users with DEV or QA?  The answer is NO.
    Our production portal UME points to ECC 6.0 and the iViews will point to other system such as SRM or BI. 
    QA:
    QA CUA will have the same configuration as Production.  Why?  When you run "Integration Testing" - PROD is similar to QA - there will be no surprises on your testing after you move it to production.
    DEV:
    This will also be the same setup was QA & PROD.  DEV will have less users not 37,000 only a couple of hundred for test users and Project Team Members.
    Something to think about.  Lets say DEV, QA & PROD are in the same CUA and you have to run major service pack testing.  This will impact CUA and users that you need to SCUG back after.  Let's say the master CUA goes down, you will affect DEV, QA & PROD administration until that system goes up.    Just very messy.
    There are lot of ways to design CUA, choose one that will work for your current situation.
    Good Luck!
    Edited by: John Navarro on Feb 25, 2008 7:52 PM

  • Manually Adding and Deleting Files in iTunes

    Hello Folks
    Got a few simple questions:
    I'd like to manually add sound files to my iTunes Library
    (preferences - yes but where exactly)
    I'd like to also 'DELETE' some sound files that were stored in the Library
    (preferences - yes but where exactly)
    And do you guys have any other sound file player that will open tunes and sound files automatically INSTEAD of iTunes?
    Perhaps WinnAmp Free Player?
    Or is there another one that you recommend?
    Thank you
    Mike

    OK, maybe I am duplicating your problem. When I do a Spotlight search on the song's filename without the extension, I get a list of files. The track I added to iTunes is still in the appropriate folder and it looks like iTunes copied the file I wanted deleted to the trash instead of moving it. Additionally, the first file was named "bell.wav". I copied it to the desktop, changed a tag in the original file, and then imported the copy. iTunes named the copy "bell.wav.wav". I then deleted the song from iTunes, or thought I did, and what showed up in the trash was a file named "Bell.wav.wav.wav". I emptied the trash and "bell.wav.wav.wav" disappeared from the Spotlight list, but "bell.wav.wav" did not.
    I repeated the above using an mp3 file and exactly the same things occurred, except that iTunes did not add a new extension to each iteration of the file (they were all called "test.mp3" rather than "test.mp3", "test.mp3.mp3" and "test.mp3.mp3.mp3").
    I had never noticed this behavior before and I will look into it some more. I have recently imported some cds to manually put on my iPod, after which I deleted them from iTunes, so I have plenty of deleted file names to look for.

Maybe you are looking for

  • Crash Dock-7691800~1

    Salve a tutti, scrivo perchè ho ripetuti crash soprattutto quando ho molte schede aperte con qualsiasi browser, non so se sia una coincidenza. grazie, per l'aiuto. questa è una parte di quello che mi compare in console: Process:         Dock [138] Pa

  • Ipod with click wheel. Windows displays device not recognized problem.

    I'm using a ipod with click wheel, and hooking it up through a usb 2.0 port with the stock cable. I keep getting a device not recognized message from windows, and the itunes software 8.xxxx does not recognize it even in diagnostics tests. Everything

  • Can't download applications (poss due to hard drive space issue)?

    Hi there, I'm having major hard drive issues with my MacBook Pro OS X 10.4.11 2.4GHz Intel Core 2 Duo 4GB 667 MHz DDR2 SDRAM laptop. I use it for video editing and also keep music on it. However for the video editing I use an external hard drive, tho

  • How to use Types structure in smartform layout

    Hi Experts, i have a requirement in smartforms. i have a z-structure having some fields. those fields should be in the smartform output when we run the print program. This is working fine. But i need to add 2 more fields to the existing z-structure.

  • Help - searching data in a data driven j2me app??

    I am writing a data driven J2ME application. The data will bundled with the application probably as binary files but maybe text files. The files can potentially contain a few thousand lines of data in the form: [item name1] [item data1] [item data2]