Bootcamp will no longer boot after deleting partition #3 of my new Mac Mini. What happened? Was it the way I tried to reclaim the HDD space for Mac?

Here's my dilemma. I have a new Mac Mini - a week old. I installed Windows 7 on it using Mac's Bootcamp assistant. I then set up and configured my Windows 7 world and everything worked fine. No issues logging in between Lion or Win7 via the restart/option key procedure. Well, yesterday I split my Mac HD partition one more time to create a third partition (was created as an "extra", e.g. possible future partition for another operating system). After creating it, I then decided that I didn't really need it. So I deleted it in Disk Utility and attempted to drag the Mac HD partition line downward so as to "fill in the gap" and reclaim the lost hardrive space. It seemed as if I could reclaim about 1 gig or so, but I figured...oh well.
Well, the Mac HD partition seems to work just fine, but now I've noticed that I can't get into the Bootcamp partition anymore. It wont boot. If I try to verify the partition [doesn't even give me "repair" as an option), then it fails and gives me the following error message: "verify volume failed. invalid request." When I go to the Startup Disk option in my System Preferences section, it displays the bootcamp partition as a folder and not as a drive anymore.
I'm assuming that I messed up some permissions or lost some vital links during my attempted resizing/reclaiming of harddrive space. How do I fix this without having to reload either all of my Mac info or all or my Win7 info? I'd hate to consider the last two days of my life loading this crap up a complete loss.
Thanks in advance!

Thanks for checking in, BDAQua.
Problem solved.
In the docs that came with my Powerlogix accelerator card, I found this sentence buried:
"If you reset the PRAM, the NVRAM code for OS9 compatibility is cleared, so you will have to boot from the Firmawre Update CD and perform this process again in order to boot in OS9."
The "process" it's referring to is the process of setting up the NVRAM for booting into OS9 from the CD.
Fortunately, I was able to find the disk, and it worked as expected. I can now, once again boot into OS9.
Conclusion: My (unadvised) attempt to load Leopard on this old machine apparently reset the PRAM on the accelerator card and cleared the NVRAM code for OS9 boot. Although I did attempt to reset the NVRAM via Open Firmware, it did not reset it on the accelerator card.
So, thank you BDAQua, for your "Ah yes" . . . that's all I needed to steer me in the right direction.
Gratefully,
tupester

Similar Messages

My iMac will no longer boot after half installing Maverick (only the essentials package was opened). How can I reboot it back to 10.8.5?

I was able to get a copy of OS X 10.9, but it wasn't the one straight from the App Store (which is free and I wish I knew before I got this other copy, but oh well). There is nothing wrong with the copy, it just simply doesn't initiate the install when you double click on it.
I installed one of the packages (essentials) off file, but not all the rest of them. For some reason the other packages weren't opening because it wasn't accepting my password, so I restarted the computer to see if that would make anything better.
It didn't. It now boots to the grey apple screen and stays stuck loading. I assume because only some of the install disk was installed, it doesn't really know what to do. But how do I fix this? How do I unistall the essentials package so that it goes back to normal?
I tried booting it whilst holding down "Command+Option+P+R" and it takes me to a limbo area where you can access disk utility. Within disk utility I can see that everything is still there.
What is the process to get it back to normal (I previously had 10.8.5).
Please help!

Thanks for checking in, BDAQua.
Problem solved.
In the docs that came with my Powerlogix accelerator card, I found this sentence buried:
"If you reset the PRAM, the NVRAM code for OS9 compatibility is cleared, so you will have to boot from the Firmawre Update CD and perform this process again in order to boot in OS9."
The "process" it's referring to is the process of setting up the NVRAM for booting into OS9 from the CD.
Fortunately, I was able to find the disk, and it worked as expected. I can now, once again boot into OS9.
Conclusion: My (unadvised) attempt to load Leopard on this old machine apparently reset the PRAM on the accelerator card and cleared the NVRAM code for OS9 boot. Although I did attempt to reset the NVRAM via Open Firmware, it did not reset it on the accelerator card.
So, thank you BDAQua, for your "Ah yes" . . . that's all I needed to steer me in the right direction.
Gratefully,
tupester

Windows 7 will not long boot after updates

I was running window 7 (64bit) on my Mac switched it off (14th April 2011) last night and it applied 11 updates,this morning it no longer works I get to the partition selection screen and it freezes. Any one know how to repair it if I can't access the windows side ?

When the message came up saying that this version of windows was incompatible... I tried 'cancel'. It moved on. It was in the middle of step 3 of 4 on the upgrade. It appears to be ok now. I'll let you know if I have any more trouble.

I built an ad using layers saved it and then converted it to a jpeg. Now when I go into elements 11 to do anything else it will not allow to copy and paste to create a new layer. What am I missing?

I built an ad using layers saved it and then converted it to a jpeg. Now when I go into elements 11 to do anything else it will not allow to copy and paste to create a new layer. What am I missing?

You know that you lost the layers when you saved it as a jpeg, right? But you're saying you can't add layers to the jpeg now when it's open in the editor? Go to Image>mode and be sure it's RGB, for starters. Are all the commands in the Layer menu grayed out?

After installing Leopard, my G4 will no longer boot in OS 9.22. (Classic still works, but I need it to boot in OS 9.) Any clues about what the Leopard installer might have done to my machine that rendered OS 9 boot unusable? What can I do to fix it?

After installing Leopard, my G4 will no longer boot in OS 9.22.
(Classic still works, but I need it to boot in OS 9.)
Any clues about what the Leopard installer might have done to my machine that rendered OS 9 boot unusable? (And what can I do to fix it?)
Details:
G4 Gigabit Ethernet
Boot ROM version: 4.2.8fl
Accelerator card added: 1.6 MHz
1.5 Gig Ram
I have erased the partition that had Leopard installed on it.
I zapped the pram.
In Open Firmware, I "reset-nvram", and then "reset-all"
I tried to reinstall G4 FW Update 4.2.8, but that must be done when booted from OS 9, and of course, that's the problem: it won't boot into 9.
I tried restarting from 9.2.1 DVD.
I tried restarting from an external firewire drive containing OS 9.2.2.
I tried moving a fresh OS 9.2.2 system folder into an empty partition on an internal hard drive. (Partition was created WITH OS 9 drivers installed.)
All attempts to boot into OS 9 give me the same results - grey screen - no spinning beach ball, no icons or logos - just a blank grey screen.
This machine still works fine in OS 10.3 and 10.4, and it worked fine for many years booting into OS 9, until I installed Leopard, and I haven't been able to boot into OS 9 since then, although I have done considerable research online and tried many things.
I have since learned that this machine does not support Leopard - 10.5. Fine, but how did it break 9.2.2?
Any help greatly appreciated.

Thanks for checking in, BDAQua.
Problem solved.
In the docs that came with my Powerlogix accelerator card, I found this sentence buried:
"If you reset the PRAM, the NVRAM code for OS9 compatibility is cleared, so you will have to boot from the Firmawre Update CD and perform this process again in order to boot in OS9."
The "process" it's referring to is the process of setting up the NVRAM for booting into OS9 from the CD.
Fortunately, I was able to find the disk, and it worked as expected. I can now, once again boot into OS9.
Conclusion: My (unadvised) attempt to load Leopard on this old machine apparently reset the PRAM on the accelerator card and cleared the NVRAM code for OS9 boot. Although I did attempt to reset the NVRAM via Open Firmware, it did not reset it on the accelerator card.
So, thank you BDAQua, for your "Ah yes" . . . that's all I needed to steer me in the right direction.
Gratefully,
tupester

881W Will no longer boot with Radio Card installed

Hello!
I have a Cisco 881W that will no longer boot/operate properly if the internal radio card is installed.
If the card is installed, all I get is the following...
System Bootstrap, Version 12.4(22r)YB5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2009 by cisco Systems, Inc
Testing lower main memory - data equals address
Testing lower main memory - checkerboard
Testing lower main memory - inverse checkerboard
Clearing lower memory rommon use
read_sys_eeprom: not a smart eeprom
Search for cpu type (Field ID 0x09) failed.
Using default value...
Search for Controller ID (Field ID 0x40) failed.
C880 platform with 262144 Kbytes of main memory
Readonly ROMMON initialized
rommon 1 >
if I do a dev I get nothing. If I do a dir flash: I get "bad device name". My cookie shows FF in all positions.
BUT......
If I remove the entire WiFi Radio card (both boards), then It boots fine, cookie appears intact, devs appear, IOS loads, just without the WAP.
Any chance this is a matter of a file getting deleted or corrupted or is this certainly bad hardware? The router sans Wifi appears fully functional.
Thanks!

You should be able to RMA the device. Search the forum for a post on the limited lifetime warranty:). They explain it good there.
Sent from Cisco Technical Support iPhone App

Photoshop CS4 will no longer open after system crash ERROR 150:30??

My Photoshop CS4 will no longer open after a system crash and reinstallation Error 150:30

https://forums.adobe.com/search.jspa?q=Error+150%3A30

I have two 2nd generation iPods and iTunes will no longer let me delete songs (Delete in gray)?

I have two 2nd generation iPods and iTunes will no longer let me delete music from either one. If I select a song, "Delete" is gray in the menu and cannot be selected. What's happened? New iTunes not compatible?

In order to manually remove music from the iPod via iTunes, you need to have the Manually manage music and videos option checked from under each iPod's Summary tab.
See this article for more details.
http://support.apple.com/kb/ht1535
B-rock

Many of my System Preferences will no longer work after installing Mountain Lion. Software update, startup disk, iCloud, etc. no longer will launch. I keep getting a drop down window saying I must restart system preferences in order to use. No go!

Many of my System Preferences will no longer work after installing Mountain Lion. Software Update, Startup Disk, iCloud, Time Machine, Notifications, etc. no longer will launch even though they do show their icons in the system preferences window. I keep getting a drop down window saying I must restart system preferences in order to use with a "Cancel" or "OK" choice. After I click on "OK" the window just keeps reappearing with the same choices and the pane I wish to use still remains inoperative. Third party preference panes DO work.
Reinstalling OSX Mountain Lion did not help. Neither did throwing away preferences.plist.

Hi Jeff,
Tried to reply with my iPhone but not easy! Anyway, back on the laptop now. Yes the crash was bad but Tek support at Prism Sound was really good. In the end I rebuilt the whole system on a new disk which took a couple of days with all the plugins, softsynths etc.... but there seemed to be no alternative in my case, and this was agreed with Prism sound as being the only alternative left to me. I still don't really know what caused the crash but ML and Orpheus are both working fine now. Let's face it, you'll have to update at sometime..maybe best to pick some time between projects On balance, I suspect that my problems were unique to my system and that your installation will go ok.
Hope it goes well,
Rick

Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?

Why would you allow firefox to update computer web-browsers if you have an idea that it will no longer work after the update? And why would you not include instructions for, how to fix the problem? Help Please! Can I go back to the old one?
Ron Bell
[email protected]

Mozilla, like many other software companies, thoroughly test their software before releasing it to the public and I'm sure that no problem you are having is intentional.
I do not work for Mozilla but I do have experience of releasing software for public usage.
Firefox has no way of knowing what other software is already on your computer and with millions of combinations it isn't always possible to test for every scenario.
You can go back to the old version of Firefox but that won't always solve your problem.
The web site below tells you how:
https://support.mozilla.com/en-US/kb/Installing%20a%20previous%20version%20of%20Firefox

My iPod Touch Gen 5 will no longer synch with iTunes on my computer. Only change since this happened is update to iPod to OS 8.1.1 iPod synch remains stuck in "Step 8 of 8"

My iPod Touch Gen 5 will no longer synch with iTunes on my computer. Only change since this happened is update to iPod to OS 8.1.1 iPod synch remains stuck in "Step 8 of 8"

On your computer go to the control panel (hover in the lower right corner) then programs, add/remove programs
Uninstall iTunes, Apple Mobile Device Service, Apple Application Support then go to apple.com and redownload and reinstall iTunes and try again.
You won't lose any content, you're not deleting that, just the programs that access them.
What is thought to happen is that sometimes a new version of itunes doesn't update the drivers in those other two programs. The only way to update the drivers is to force it by uninstalling the programs which allows itunes to write the correct ones.
My iPad and iPod did exactly the same thing and this is how I fixed it.

TS2755 Hi All - I sent a text using my iphone 5 - It is PAYG and had no money in it. It tried to send as an SMS but gave the 'green button reject message'. After deleting the convo, the phone keeps trying to send the deleted text via SMS and wont stop not

Hi All - I sent an sms using my iphone 5 - It is PAYG and had no money in it. (stupidly)
It tried to send as an SMS but gave the 'green button reject message'.(no money)
Step 2 in this stupidity - the phone keeps trying to send the deleted text via SMS and wont stop notifying me of this. Totally ruining the functionallity of my phone, and more so totally annoying. All I want to do is stop the constant re-trying of sending the deleted SMS.
Any ideas?
Many Thanks!

Hi, many thanks for your help - Pressing and holding sleep/reset hasn't worked, the msg is still continually reporting it is failing to send. I can restore to a previous version however I'll lose my paid apps. Is there any way to work around this. I'm only concerned about one app - Epocam HD which I purchased last month. My last backup on PC is 4 March 13 - before I bought the paid app - Itunes advises me I'll have to re-pay to get my apps (app) back. Even though it advises that icloud backed up this morning at 1:30 am (which although it is before the text, I cannot manually select this restore).
What a mess!

I have a Mac mini mid 2010. I have ML installed on one of the 500GB disks. I want to install Boot Camp on the 2nd 500GB disk. Mine is XP Professional.

I have a Mac mini mid 2010. I recently installed ML on one of the 500GB disks. I want to install Boot Camp on the 2nd 500GB disk. Mine is XP Professional. My original OS was Snow Leopard Server edition. Please let me have your suggestions and advice. Thank you. I am in India.

Mountain Lion Boot Camp no longer supports Windows XP, it would also only prepare the same physical disk you run the Boot Camp Utility from i.e. the Mountain Lion disk.
See http://support.apple.com/kb/ht4818#3
I suggest you start off with the second drive formatted as a single HFS+ volume with a GUID partition scheme, then install Snow Leopard on it. Then boot with Snow Leopard and run its version of Boot Camp utility, when you tell it to prepare the (second) drive you can tell it to allocate the minimum to Snow Leopard and the maximum to Windows. Then you can install Windows XP.
Note: Boot Camp Utility was not included with Snow Leopard Server.

How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

If you have either iMovie 09 or iMovie 11 you can do this easily using the Cutaway feature.
Go to iMovie/Preferences and make sure that the Advanced Tools are enabled.
Now you jut drag and drop the 2nd clip onto hte first clip at the frame where you want the Cutaway to start. A popup menu will appear. Choose Cutaway.
Here is a good Tutorial.
If you have iMovie 08, let me know. There is a way to do it, but it is more complex.

I have mac mini os x mountain lion can i put snow leopard on the partition

I have a mac mini os x mountain lion can i put snow leopard on the partition

on the same partition? no. you'll need to create another partition if you want to dual boot, and install SL there.

Bootcamp will no longer boot after deleting partition #3 of my new Mac Mini. What happened? Was it the way I tried to reclaim the HDD space for Mac?

Similar Messages

Maybe you are looking for