Booting from a subdirectory

Can I install an operating system in a directory of a filesystem used by another operating system?
In other words, if I have one root partition holding everything for an Archlinux install, can I install another operating system (say, Ubuntu), in /home/yktula/ubuntu/, with /home/yktula/ubuntu being the root directory of the filesystem used by Ubuntu and be able to boot from it?

yktula wrote:
Can I install an operating system in a directory of a filesystem used by another operating system?
In other words, if I have one root partition holding everything for an Archlinux install, can I install another operating system (say, Ubuntu), in /home/yktula/ubuntu/, with /home/yktula/ubuntu being the root directory of the filesystem used by Ubuntu and be able to boot from it?
You may find this post by vadmium interesting.
He's created an initcpio hook to boot from a subdirectory.

Similar Messages

Solaris 10 for Intel - boot from floppydisk

Does anybody has an idea wheter it is possible to boot solaris 10 from floppydisk for installing the OS.
We have systems that cannot boot from ethernet/cdrom but we would like to use/install solaris 10 on these systems.

It is possible to start the installation (boot from) a floppy disk, using
a "DCA" (device configuration assistant) floppy diskette.
A 1.44MB DCA floppy image can be found on CD 2/4 or the DVD, in
the subdirectory .../Solaris_10/Tools, file d1_image. Write it to a
blank floppy media using the Unix "dd" or the MSDOS "rawrite.exe"
utility.
After you start the boot process from the DCA floppy, you must
either use a CDROM / DVDROM device as the boot device for the
Solaris installation, or an NFS installation (server using a supported
NIC in the client; 3Com 3c905, Intel Pro/100, or Dec 21x4x do work).

Why can't I boot from an SATA drive on P6N SLI-FI?

I have a P6N SLI-FI, running XP Pro 32bit. Two sata drives are configured as a striped array and I boot from an IDE drive. It is stable but not as fast as I'd like.
I'd like to install XP-Pro 64 bit on another sata drive. The CMOS setup utility sees the new drive, but it is not listed as a drive I can boot from.
Must I configure it as a single raided JBOD drive? If so, I am a little confused about what utilities to copy to a floppy drive for windows to use when installing the new OS. The manual says to copy the contents of :\\nVidia\System\C55+MCP51\RAID to a floppy. Neither the original CD nor the downloaded utilities have a RAID subdirectory to C55+MCP51. There are subdirectories called :\\nVidia\System\C55+MCP51\IDE with subdirectories Win2K and WinXP. Both have subdirectories called raidtools, sata_ide and sataraid. Do I want Win2k or WinXP for XP64? Which subsequent directory should I choose?
I have ver 2.4 of the BIOS.
Thanks
Steve

Quote from: Maesus on 07-December-07, 08:51:33
Try :\\nVidia\System\C55+MCP51\IDE one
Maesus: From the downloaded files (having specified WinXP 64 bit) I can see :\\nVidia\System\C55+MCP51\IDE\Win64. It is too big to fit on a floppy, containing subdirectories raidtool, sata_ide, and sataraid. I'm trying with the sata_ide and sataraid directories now. I will report on any success.
WinXP wants txtsetup.oem: it is within sataraid. I'll try putting the contents of that directory in the root of the floppy.
Did that, now WinXP reports that the driver .(..x64...) is corrupt. I'll try a fresh copy as soon as I can download from the internet.
It looks like the problem was bad floppy disks. I finally found one that was formated and could hold the files. WinXP64 is installing now. I wonder if Microsoft will ever realize that floppies are unreliable media that are ready to be tossed in the trash heap.
I have to say, life is much more convenient with a KVM switch between computers running WinXP and Ubuntu. This is a little frustrating, but it is much better being able to switch between the recalcitrant install and a working computer with a couple of keystrokes.
Quote from: MarkJohnson on 07-December-07, 15:20:54
I remember having a similar issue when SATA RAID chipsets first came out that you had to treat the single drive as a RAID and even load in RAID drivers. Maybe since the chipset is already in RAID mode it wants to be setup as a single drive RAID 0.
I also had this issue with my Intel chipset recently as it wouldn't work as a single drive RAID and I had to turn RAID on and off in the BIOS whenever I wanted to dual boot off my third hard drive. But I'm sure the nvidia supports the single drive RAID, at least the AMD chipset did.
also, one last thing is to make sure the drive is enable in the BIOS. It may not have enabled the drive properly.
Good Luck
-=Mark=-
Mark: I think that's the exact problem I have. Once you convert any sata drives to raid, they all have to convert to be seen.

Disk Repair Boot from OSX Disc...

Have a bad issue: my iMac has been found (using disk verify) to be corrupt. It tells me to boot from the installation disc to repair. Only problem is my DVD SuperDrive is dead! How can I boot from a disc if the drive won't mount? I've used three other external drives and none are recognized.
Any suggestions?
Thanks!!

Hi Gully, I agree with iyacyas
{quote:title=iyacyas wrote:}If you have another Mac to use you can place the sick Mac into Target Disk Mode and plug it into the good Mac via firewire and run DU against it from their.{quote}
See > http://blogs.techrepublic.com.com/itdojo/?p=198
and > http://www.selfreliantfilm.com/?p=143
Even if you can't repair the drive from the MacBook Pro in TDM, you should be able to move your user files to either the MacBook Pro or an External HD until you can repair or replace the iMac.
Dennis

Will the late 2013 Mac Pro boot from an external drive (4Tb, USB 3) with a cloned Win7 x64 partition on it?

Hello all,
I ordered a CTO Mac Pro for heavy rendering and animating work, and I am planning on using bootcamp to install a windows partition (for 3DsMax). As I am now using a HP Elitebook 8770W that has several valuable files and projects on it, I have bought a Seagate 4Tb external Desktop Drive that uses USB 3.0 to use as a backup drive. Now, as I saw that Bootcamp Assistant only supports installing a x64 version of Windows 8, my question is:
Will a late 2013 Mac Pro using bootcamp assistant boot from an external USB drive with a cloned partition running x64 win7? Or do I really have to buy Windows 8 and install that to my internal SSD, and then use the migration assistant to copy over my projects?
Thanks!

Posted? or found in new builds?
BCA should really just pull whatever the latest drivers are when run.
If it is with how it partitions and sets up nMP and its partition for Windows that is another matter and makes sense.
Some people want UEFI native booting in Windows, and my experieince with that on PCs has been that it boots faster and runs well, but has different partitions that it wants. For one thing, there is now a backup "system reserved" partition, just as Apple GUID has some volume information blocks and backup and areas that were once optional (and if format erase was not able to, it would not create one) are now mandatory.
Windows 8.1 is req'd, reason a backup should be a big must - is it might overwrite and use another OS's partition table entries. Especially when doing UEFI install.
There was something about which linux OS was safe and how they would each add entries in the table, but one would not place nice. That one had to be done first or not at all.

MSI P965 Neo-F (MS-7235) problem booting from USB flash drive

Hi, all!
I was wondering if someone can help me. I am trying to install Windows 7 x64 on my 320GB HDD that is connected to my MSI P965 Neo-F (MS-7235) mobo (The CPU is a Core2Duo 6600 with 6GB of RAM). I created a bootable USB 8GB flash drive using Microsoft's "Windows 7 DVD USB Download Tool" and bootsect.exe (Needed to create a boot sector on the USB drive) from the MS store. I successfully tested the resulting bootable USB drive using freeware MobaLiveCD (Sorry, you'll have to Google "mobalivecd" since this forum doesn't seem to allow external links) running under Windows XP SP3 x86 (32bit). Under MobaLive's QEMU, Windows 7 setup loaded its files and produced an error message basically saying that it could not install Windows 7 x64 under an x86 OS (No surprise there since QEMU is emulating a 32bit processor - The point is that the bootable USB drive I created works).
I then went into my mobo's CMOS and under Advanced BIOS Features -> Boot Sequence -> 1st Boot Device, set the value to "USB-HDD" and rebooted my machine. The USB drive probably was not detected by the mobo under that setting because it proceeded to boot from my HDD which is the 2nd Boot Device. I repeated the same process using each one of the four USB ports in the rear of the mobo (I don't have the optional USB panel that the MSI users manual mentions) to no avail. I also tried setting the 1st Boot Device to "USB-FDD" and repeated the process for each USB port but the mobo still will not boot from the USB drive (It does not recognize it). When I set the 1st Boot Device to "USB-ZIP" and rebooted, the mobo hangs after "Verifying DMI Pool Data ..." which is no surprise since I am not using a USB ZIP drive but a USB flash drive. It appears that under that setting, it recognizes that there is a USB device attached but it is expecting a response (From a USB ZIP drive). I had no idea it would be this frustrating to boot from a USB flash drive! If anyone knows how to make this mobo boot from a USB flash drive, please let me know. Any assistance would be greatly appreciated. Thanks!

Quote from: RemusM on 12-June-14, 17:51:30
The P965 Neo motherboard is 8 years old, so don't expect miracles. .... You need to format the USB stick in the proper way. You may use this utility to do it: hxxp://www.prime-expert.com/flashboot/ Also, it's a good idea to use the first (USB0) connector (controlled by Intel ICH8) for the USB flash drive. Good luck.
Thank You for your fast response, RemusM!
I'm not looking for a miracle. I'm just looking for a mobo that does what it is supposed to do: Allow me to boot from a USB flash drive (I don't think that is too much to ask for even from a board that was made in 2006)!
Thanks for recommending FlashBoot. I see under their "Why FlashBoot" section that it "... does not shift to user the burden of choice between "USB-ZIP" and "USB-HDD" at format time and proper BIOS setup at boot time. ... and every USB disk is formatted in such way that it will work in every environment properly, regardless of current BIOS setting.", so I will give it a try and let you know about the results afterwards.

Z77A-GD65 Cannot boot from Bios A

Hi,
I was fine for years until about two weeks ago, when PC sometimes didn't boot up (no VGA signal, keyboard dead). I fixed the situation by trying to turn it on/off again few times and then it worked. Few days it was OK, and then it happened again. Fixed by the same way. Today, it happened again and I wasn't able to fix it.
I checked LED error code and it was cycling about 5 codes like 49,55,4F, .. (see the attachment). I tried to check/remove all components with no success. I also tried CMOS clearing (connect pins, battery out), but still nothing.
At the end, I tried to switch to Bios B and PC booted without any problem. I updated Bios B to the latest version and now I am fine. It also looks that problem is fixed.
But what is wrong with Bios A? I want to fix it and use it, but I don't know how. I tried to update the bios with Msi forum hq usb flashing tool (booted from Bios B and then switched to Bios A before flashing), but it is still dead.
Thanks a lot for your help.

I also had some sort of same problem (Bios A not booting, bios B OK)
BUT remember one thing: that bios switch is not really hardware. To really switch between bioses you must unplug power cord, wait for capacitor to discharge and then flip the switch.
So the sollution for you (that worked for me twice) is: clear CMOS (search forum for detailed method). Switch to BIOS B, Make bootable USB with BIOS version 10.5 (A5) (because this version REALLY works with option to flash the other BIOS). Update (or just downgrade to BIOS 10.5) and then clear CMOS with powercord out and battery out. Boot from bios B and within bios flash BIOS A from BIOS B. You will have same version on both Bioses. After that switch to BIOS A (again after clear CMOS etc...) and now you just can upgrade to which bios version you want using the USB bootable stick.
I now have BIOS A with version 10.11 (AB) and BIOS B with 10.5 (A5) just to restore BIOS A in case of failure.
First time when I did this was because mobo failed to boot and can't save OC profiles. Second time was (probably) because of many OC testing.

MBP freeze booting from any drive

My MBP is two years old. It has recently started freezing unpredictably. Total lock-out freeze. No movement whatsoever, mouse stops, nothing reponds. Hard reset required. Often gives the grey "you need to restart multilingual screen" on powering up after this. After a few times I can usually get it to boot up. What makes this most worrying is that the freezes happen irrespective of what system I boot up into.
I have used the main OS 10.4.11 partition, a boot camp partition running XP, an external firewire bootable copy of the system from a month or so ago, and a Tech Tools Pro 4.0 bootable CD. I can boot up into all systems, but all have given me the same kind of freeze at some point. This should help me pin down the problem...but I'm not knowledgable enough. Anyone recognize this?
Thanks
S

Sounds like a hardware problem but could simply be faulty RAM. Does the computer kernel panic (that restart screen) even if you boot from an OS X Installer Disc? If you have the original OS X Installer Disc that came with computer then do the hardware diagnostics:
How to run hardware diagnostics for an Intel Mac
Boot from your original OS X Installer Disc One that came with your computer. After the chime press and hold down the "D" key until the diagnostic screen appears. Run the extended tests for a minimum of two or three hours. If any error messages appear note them down as you will need to report them to the service tech when you take the computer in for repair.
Some "common" error indicators:
SNS - sensor error
MEM - memory error
HDD - hard disk drive error
MOT - fan error

Not booting from 10.4.8 volumes after upgrade from 10.4.7

I'm sorry to report that my aged G4 450 MHz AGP with 4 internal Hard disk drives no longer boots from any of the 2 volumes upgraded to Mac OS X 10.4.8 as soon as it was started from another volume!
All was working fine as long as 10.4.7 was installed on the 2 232 GB disks connected to the SIIG ATA133 controller. I could boot from any OS on any of the 4 disks, 5 partitions:
internal ATA66 bus:
18 GB disk, 2 partitions: 'IBM_18GB' with OS 9.2.2 and TechTool Pro's 'eDrive' with 10.4.7
71 GB disk, 1 partition 'IBM_71GB' with OS 9.2.2
PCI SIIG ATA133 controller:
232 GB disk, one partition 'I1232GB' with 10.4.7, now upgraded to 10.4.8 and no longer bootable
232 GB disk, one partition 'I2232GB' with 10.4.7, now upgraded to 10.4.8 and no longer bootable
Now I can only boot from the Mac OS 9.2.2 or the eDrive 10.4.7 partitions.
What I did so far: 'I2232GB' was my main OS X startup volume, 'I1232GB' contains a clone of it, plus additional folders like software base and backups.
After upgrading 'I2232GB' to Mac OS X 10.4.8 through Software Update and repairing permissions all was OK as long as the Mac was just shut down or re-started: it always booted up in Mac OS X 10.4.8 from 'I2232GB' without any problems.
The next day I booted from 'I1232GB' to do the same there.
Afterwards I could no longer boot in Mac OS X 10.4.8 from 'I2232GB' nor in in Mac OS X 10.4.8 from 'I1232GB': it just gets to the grey screen with the Apple logo, but the round circle underneath indicating some progress never appears. I left it there for hours: it just hangs.
With the Option key held at startup I could boot from the other partitions with Mac OS 9.2.2 or the eDrive with 10.4.7. None of their Startup Control Panels was able to get me back to 10.2.8!
So I booted from the TechTool Pro 4.5.1 DVD to Optimize both volumes, 'I1232GB' & 'I2232GB', always Files only.
Then I booted from the DiskWorrior 3.0.3 CD to rebuild the directories of both volumes, 'I1232GB' & 'I2232GB'.
Still I can not boot from either 'I1232GB' or 'I2232GB' in Mac OS X 10.2.8!
Downloaded the Mac OS X 10.2.8 Compo Update (for PPC) and installed it onto both 'I1232GB' & 'I2232GB' while booted from the eDrive which I keep on Mac OS X 10.4.7 - no luck either, still I can not boot from either 'I1232GB' or 'I2232GB' in Mac OS X 10.2.8!
Then I backed up the users folder from 'I2232GB' onto 'I1232GB', booted from Mac OS 9.2.2 and used Intech's Hard Disk Speedtools 3.6 to format 'I2232GB', afterwards initialized it with Alsoft's Plus Maximizer Extension for a Block Size of 512 Bytes.
Installed Mac OS X 10.4 from DVD, as well as iLive '06 and upgraded everything to the latest releases with Software Update. All was working fine with all the required reboots until another startup volume was chosen: afterwards again I can no longer boot back into Mac OS X 10.2.8 on the fresch installed 'I2232GB'!
Any help would be appreciated.
Here is some information found by System Profiler from Mac OS X 10.4.7, eDrive, let me know if you need more:
Hardware Overview:
Machine Name: Power Mac G4 (AGP graphics)
Machine Model: PowerMac3,1
CPU Type: PowerPC G4 (2.8)
Number Of CPUs: 1
CPU Speed: 450 MHz
L2 Cache (per CPU): 1 MB
Memory: 2 GB
Bus Speed: 100 MHz
Boot ROM Version: 4.2.8f1
Serial Number: XA00715VHSF
Sales Order Number: M7628LL/A
ATA Bus:
IBM-DPTA-372050:
Capacity: 19.12 GB
Model: IBM-DPTA-372050
Volumes:
IBM_18GB:
Capacity: 13.12 GB
Available: 6.96 GB
eDrive:
Capacity: 6 GB
Available: 3.03 GB
IBM-DTLA-307075:
Capacity: 71.59 GB
Model: IBM-DTLA-307075
Volumes:
IBM_71GB:
Capacity: 71.59 GB
Available: 39.65 GB
ATA Bus:
PIONEER DVD-RW DVR-107D:
Model: PIONEER DVD-RW DVR-107D
Firmware Revision: 1.21
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2000 KB
IOMEGA ZIP 100 ATAPI:
Model: IOMEGA ZIP 100 ATAPI
ACARD,6880M:
Name: ACARD,6880M
Type: scsi
Bus: PCI
Slot: SLOT-C
Vendor ID: 0x1191
Device ID: 0x0009
Subsystem Vendor ID: 0x1191
Subsystem ID: 0x0009
Revision ID: 0x0003
SCSI Parallel Domain 65536:
Initiator Identifier: 7
ATA HDT722525DLAT80:
Capacity: 232.89 GB
Manufacturer: ATA
Model: HDT722525DLAT80
Revision:
Removable Media: Yes
BSD Name: disk2
OS9 Drivers: Yes
SCSI Target Identifier: 0
SCSI Logical Unit Identifier: 0
S.M.A.R.T. status: Not Supported
Volumes:
I1232GB:
Capacity: 232.89 GB
Available: 14.1 GB
Writable: Yes
File System: HFS+
BSD Name: disk2s3
Mount Point: /Volumes/I1232GB
ATA HDT722525DLAT80:
Capacity: 232.89 GB
Manufacturer: ATA
Model: HDT722525DLAT80
Revision:
Removable Media: Yes
BSD Name: disk3
OS9 Drivers: Yes
SCSI Target Identifier: 2
SCSI Logical Unit Identifier: 0
S.M.A.R.T. status: Not Supported
Volumes:
I2232GB:
Capacity: 232.89 GB
Available: 180.11 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk3s3
Mount Point: /Volumes/I2232GB
The RAM consists of 4 identical modules and is about 1 year old:
DIMM0/J21 to DIMM3/J24:
Size: 512 MB
Type: SDRAM
Speed: PC133-333
Status: OK
Many thanks for your help!
Josef
Apple G4 AGP Mac OS X (10.4.8) 4 internal hard disks, dual layer DVD-RW, 2GB RAM

What I did so far: 'I2232GB' was my main OS X
startup volume, 'I1232GB' contains a clone of it,
plus additional folders like software base and
backups.
After upgrading 'I2232GB' to Mac OS X 10.4.8
through Software Update and repairing permissions all
was OK as long as the Mac was just shut down or
re-started: it always booted up in Mac OS X 10.4.8
from 'I2232GB' without any problems.
The next day I booted from 'I1232GB' to do the same
there.
Afterwards I could no longer boot in Mac OS X 10.4.8
from 'I2232GB' nor in in Mac OS X 10.4.8 from
'I1232GB': it just gets to the grey screen with the
Apple logo, but the round circle underneath
indicating some progress never appears. I left it
there for hours: it just hangs.
With the Option key held at startup I could boot from
the other partitions with Mac OS 9.2.2 or the eDrive
with 10.4.7. None of their Startup Control Panels was
able to get me back to 10.4.8!
So I booted from the TechTool Pro 4.5.1 DVD to
Optimize both volumes, 'I1232GB' & 'I2232GB',
always Files only.
Then I booted from the DiskWorrior 3.0.3 CD to
rebuild the directories of both volumes, 'I1232GB'
& 'I2232GB'.
Still I can not boot from either 'I1232GB' or
'I2232GB' in Mac OS X 10.4.8!
Downloaded the Mac OS X 10.4.8 Compo Update (for PPC)
and installed it onto both 'I1232GB' & 'I2232GB'
while booted from the eDrive which I keep on Mac OS X
10.4.7 - no luck either, still I can not boot from
either 'I1232GB' or 'I2232GB' in Mac OS X
10.4.8!
Then I backed up the users folder from 'I2232GB'
onto 'I1232GB', booted from Mac OS 9.2.2 and used
Intech's Hard Disk Speedtools 3.6 to format
'I2232GB', afterwards initialized it with Alsoft's
Plus Maximizer Extension for a Block Size of 512
Bytes.
Installed Mac OS X 10.4 from DVD, as well as iLive
'06 and upgraded everything to the latest releases
with Software Update. All was working fine with all
the required reboots until another startup volume was
chosen: afterwards again I can no longer boot back
into Mac OS X 10.4.8 on the fresch installed
'I2232GB'!
I found several typos in above post, wherever it was 10.2.8 it should have read 10.4.8 - I'm very sorry for confusing you, this would not have made sense, but I found no way to edit the existing text therefore I modified the quote of it here.
I do not need Mac OS X 10.2.8 back, but it would be nice to boot back in Mac OS X 10.4.8 from another volume as the current one - which was working fine before with Mac OS X 10.4.7.
Many thanks,
Josef

Win 7 boot from VHD "License Error: Booting from VHD is not supported on this system"

I am trying to set up my TP 500 model 2242-CTO to boot from a virtual hard drive, per the instructions at
http://blogs.technet.com/keithcombs/archive/2009/05/22/dual-boot-from-vhd-using-windows-7-and-window...
I get all the way thru the Win 7 setup, but just as the login screen is presented, I get the subject message. That's the end of story, can't go further.
I just updated the BIOS and hard drive firmware to the latest versions on the Lenovo site as of today (3.09), and the hard drive firmware said no update needed.
Anybody know what will work? Just academic now, as I will go ahead an reinstall win 7 normally....
Thanks !

Not true, mine is win7 pro and works, I think the problem is that lenovo makes a custimized boot for their utility

Can't boot from DVD using C key

I desperately need to use DiskWarrior on my startup disk. I have used it on my secondary internal hard disk with no problems. A couple of years ago my Apple keyboard went up on me and I needed a replacement immediately (I worked from home), so I ran out to OfficeDepot and bought a Microsoft keyboard that had software with it to make it run with a Mac. It has done fine for me. However, when trying to boot from DiskWarrior, I hold the C key down and it doesn't boot from the DVD, it just boots from my internal startup disk. I was able to install Mac OS X 10.4 with the DVD and this keyboard, however. DiskWarrior tech support dudes tell me it is the fault of the Microsoft keyboard. I'm not so sure (since I installed 10.4 with this keyboard). I don't want to buy an Apple keyboard "just in case." But perhaps this is a known issue by somebody "out there." Any help would be appreciated (before my startup disk explodes altogether). Thanks!

I have 3 Microsoft keyboards, going back to my G4 MDD. Usually plugged into an Apple Display, but on some occassions I've had to plug it directly into front USB port (or rear, front is accessible).
The one thing that I would do, is not just "zap PRAM" from cold boot, but boot into the Open Firmware screen and RESET-NVRAM, and see if that helps. Force the device ID list to be rebuilt, and does a more complete job than zapping can.
There have been a lot of major problems with Apple USB hub type support. I too was troubleshooting an issue and got the "run around."
The only time I've seen where someone could not boot from a DVD/CD was when the hard drive in the system directory was severely corrupt - OS X looks to find any and all bootable devices even when you boot from CD or another drive. And a damaged journaling file is even harder to fix usually.
Outside of the G4 PCI model (1999, early '00) a G4 can boot from Firewire, any problem I'd guess was a defective FW port; some FW cases themselves.
I never really use DW CD. Always always clone your system; create an Emergency boot drive to work from - and used only in emergency so you know it works and isn't just a backup. And, of course, a backup of your working system.
USB cables can flake out. Even new. The USB extension cable Apple includes being one such that has been known to be the culprit. So doubt and verify any cables and devices.
One G5 owner has a LaCie drive not even connected, but the FW cable was, hanging out the back, and would cause:
slow boot sometimes; kernel panic other times; pull the cable, life is back to normal again. FW cables and devices (not sure if LaCie has the market cornered or not) that "wipe out" FW ports, cause shorts, should be avoided (maybe banned).
I've used an MS keyboard for about 4 yrs on my G4, still running 10.4.11. Ever since my Apple split ergonomic keyboard died, and I've got 4 Apple Pro keyboards sitting around (I can palm a basketball but don't like typing on small keyboards). Currently use MS 3000 and 4000 keyboards.
There are lots of reports of Leopard where the system is not responding, but the mouse able to move, but no interaction - can't launch anything or even bring up the Force Quit dialogue. The system being totally non-responsive, and people force shutdown, with high potential of leaving the directory in disrepair.
Mac OS 10.2.5 was suppose to fix and solve USB hub problem. That updated lasted less than two weeks. USB issues have been around, as have Firewire problems. Even Windows Vista can loose track of and get confused by unplugging/replugging devices multiple times that it looses the device ID.

How do I create multiple live USBs of Operating systems to boot from on one flashdrive?

How do I create multiple live USBs of Operating systems to boot from on one flashdrive?
I am attempting to create multiple live USBs within one flashdrive so that i can boot various operating systems without having to buy multiple USb sticks. I am using a Mac OS X Snow Leopard 10.6.8 Operating System currently. I am using the Terminal provided by the OS.
I would like to try Debian, Kali, Precise Puppy, and Sabayon- with one space left empty for whatever Linux OS I would like to try next. I have partitioned an 8GB flashdrive into the following sections:
name of intended OS,     space allocated for it:
1)Debian ........................1.32 GB
2)Kali..............................2.61GB
3)Precise Puppy..............163.7MB
4)Sabayon.......................1.77GB
5)TBD..............................2.14GB
I have figured out how to change the .iso files of the operating systems into .img files with the following commands:
hdiutil convert -format UDRW /path/to/input.iso -o /path/to/output.img
a .img.dmg file is created, this is corrected in the next line of code *please note: I am a a very beginner at programming, and would greatly appreciate any help. Thank you!
mv /path/to/output/file.img{.dmg,}
This is where I started to get confused:
I entered diskutil list to find the location of the partitions on my flashdrive, and this is the relevant section:
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     FDisk_partition_scheme                        *8.0 GB     disk1
   1:                 DOS_FAT_32 DEBIAN               1.3 GB     disk1s1
   2:                 DOS_FAT_32 KALI                    2.6 GB     disk1s2
   3:                 DOS_FAT_32 PRECISE            163.7 MB   disk1s3
   4:                 DOS_FAT_32 SABAYON           1.8 GB     disk1s5
   5:                 DOS_FAT_32 TBD                     2.1 GB     disk1s6
This is the code I attempted to use and the subsequent result:
charles-burtons-mac-mini:~ charlesburton$ sudo dd if=/Users/charlesburton/Desktop/debian-live-7.2-i386-gnome-desktop.img of=/dev/disk1s1 bs=1m
dd: /dev/disk1s1: Resource busy
*at this point I went to the Disk Utility GUi and unmounted only the DEBIAN partition, now back to the terminal*
charles-burtons-mac-mini:~ charlesburton$ sudo dd if=/Users/charlesburton/Desktop/debian-live-7.2-i386-gnome-desktop.img of=/dev/disk1s1 bs=1m
dd: /dev/disk1s1: end of device
1259+0 records in
1258+1 records out
1320005632 bytes transferred in 1011.966891 secs (1304396 bytes/sec)
Please may someone help explain why I had a return value of +1 in my records in and how I can make it work properly.

I would like to know the answer to this as well. I tried renaming the 3D version by adding 3D after it, but it still not a separate movie in iTunes.
It's putting them in the same folder.

Trying to install OSX.4 sys stalls when booting from dvd

I've read many of the discussions on this topic. Some are close but none are exactly like the problem I am encountering. I have a Power Mac G4 that was running OS9.2 and I've been trying to install OSX.4. I've tried every possible combination of starting from the dvd but it dones the same thing at the same point everytime. It restarts from the disk, I get the gray screen with the apple logo and the spinning wheel. It will run like this for about a minute or two and then freeze. I can't force quit and I have to restart. I thought it needed a firmware update so I checked the links (I had seen on some of the posts) but it looks like it's a machine that doesn't need one. But I'm not 100% sure how to tell.
I then went back and started with OSX and OSX.2 and they installed fine. I thought it would have to be installed progressively. But I still have the same issue. I am doing an erase and install with each upgrade. The software is a full retail version for each upgrade as well. Any help would be greatly appreciated.
Power Mac G4 Mac OS X (10.4)
Power Mac G4 Mac OS X (10.4)
Power Mac G4 Mac OS X (10.4)

Hi Michel,
Be aware that you can only use an external firewire disk as boot volume since USB is not a bootable interface with MacOS X on PPC-based computers.
The message you receive is o.k. Insert the Install DVD and reboot while holding down the c-key. This will boot you directly from the CD to the installer application. Once you selected the language, select disk utility from the MENU, select your External drive and format it as "Apple Extended (Journaled)".
Quit disk utility and proceed with the installation. Make sure you select the external drive as destination!
When you have to reboot you will boot to the internal disk again. That's o.k. Open disk utility and repair the external disk and also permissions on the external. Next download and install the Mac OS X Update 10.3.9 (Combo). (you are still booted from the internal hard disk, so you will not be prompted for a restart).
Now restart and hold down the Option-key during boot. In the boot-manager you can select the external disk as boot volume. If your computer booted o.k. you made it! Just remember to Repair permissions before and after an update!
If this answered your question please consider granting some stars: Why reward points?

Booting from firewire target mode on a mac pro with kernel panic?

hello
i am wondering if it is possible to use firewire target mode to boot a mac pro that has never got past a multi language kernel panic on boot?
basically i have tried all the other options and cant get it to open the superdrive to insert my installation disk, as to repair the drivers with my snow leopard disk.
i've tried holding my mouse key down, the paperclip option on the drive itself and the firmware keycombo, so my idea is that the only way to fix it is with target mode. can this be done - and if so - could someone direct me towards a tutorial that will help me do this.
please advise if this is possible or if there is another method i should use? apart from taking it to the applestore (extreme last ditch option) i am quite low on ideas here.
many thanks!
p.s heres the message i wrote for the original problem which caused all the kernel panics;
"i recently bought a mac pro and upon starting it for the first time opted to transfer the all the data i could over via firewire from my macbook pro.
i used the standard 't' command with the firewire symbol.
Somewhere towards the end of the transfer (I am not sure at what pont - I wasnt there for all of it) - , the monitor went blank and the whole thing was unresponsive. my macbook's firewire sign continued to move around the screen.
after leaving it for some time i decided to turn off the macbook and then the mac pro.
i restarted the macbook and got some pretty crazy stuff happening to my calender - but so far everything seems to be fine.
i am more concerned about the "you need to restart your computer" message; this is the dreaded 'kernel panic' right?. i have never actually done anything with this computer yet, and it was purchased new."

"i recently bought a mac pro and upon starting it for the first time opted to transfer the all the data i could over via firewire from my macbook pro.
Never opt to transfer until you have insured it works fine for a couple days, I would never use Setup or Migration Assistant until such time, and I would have a bootable backup clone.
Try pulling all the hard drives from inside your Mac Pro and boot from OS X DVD - latest OS build.

How do I install Yosemite on a 2nd HDD I have added and have the Mac Pro boot from the new HDD?

My MacPro's HD seems to be failing. None of the tests I run indicate that, but I get constant spinning balls and everything takes a long time. I bought a 2nd HDD and installed it in the 2nd bayou my Early 2009 Mac Pro. I formatted it and want to install Yosemite and have the Mac boot off the new drive. It is currently running OS X 10.9.5. When I go to update to Yosemite it begins to download. Will it give me the option of which drive to install on? Or will it just upgrade the original Mac's HD?

A Samsung 850 EVO 128GB SSD $75 now and makes a huge improvement. But get the 250GB which is $99. 500GB $199
Wish you asked us first Awesome prices and performance.
Output from Etrecheck is an easy "quick check" of what your system is carrying around and what baggage it has.
Move data to a 'data and media library" drive.
Use CCC to skip the user data folders except ~/Library and clone to SSD
And might want to save the installer .ESD package for use as clean installer and to be able to boot from.

Booting from a subdirectory

Similar Messages

Maybe you are looking for